Related
Problem: Stuck on white/black screen, can't boot into recovery, able to boot into download mode
I recently returned my phone to stock following the return to stock tread (4.1.1), however, my first OTA update from ATT (4.1.2), after the install finished it stuck at boot up screen. And I can't get into recovery screen at all no matter what I try.
Tried to flash TW recovery
Tried to flash CWM recovery
no success, any help?
Edit, I noted whenever my phone is off, when plug in the charger/usb cable, my phone automatically goes into the black/white letter screen. WITHOUT touching any button what so ever.
On download screen
Current Binary: Custom
Systems Status: Custom
Use Kies to emergency recover back to stock 4.1.1.
Steps. (READ ALL BEFORE STARTING)
1.) Downloads Kies onto your pc
2.) Install drivers to pic
3.) Open Kies and go to TOOLS > instal/upgrade firmware.
4.) Kies will ask you for you device model. AT&T = SHE I317. And your serial number. Located behind the battery.
5.) Hit start in Kies it will down load the stock firmware to your PC. Follow the instructions.
6.) It will eventually ask you to put your phone in download mode and connect it to the pc. Do this.
7.) Don't touch it. It is going to take about 10-20 min depending on your Internet speed and your computer.
When it is complete your phone will be back to stock. The same it was the day you pulled it out of the box.
***I would also make sure you back up any data on your phone because it will delete the sd card. It is also wise to remove any external storage sd.
****when finished you can re root using cf auto root or take the OTA update to get you back to 4.3.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
kelpqq said:
Problem: Stuck on white/black screen, can't boot into recovery, able to boot into download mode
I recently returned my phone to stock following the return to stock tread (4.1.1), however, my first OTA update from ATT (4.1.2), after the install finished it stuck at boot up screen. And I can't get into recovery screen at all no matter what I try.
Tried to flash TW recovery
Tried to flash CWM recovery
no success, any help?
Edit, I noted whenever my phone is off, when plug in the charger/usb cable, my phone automatically goes into the black/white letter screen. WITHOUT touching any button what so ever.
On download screen
Current Binary: Custom
Systems Status: Custom
Click to expand...
Click to collapse
Did you get it working? Mine has the same issue. Sucks...
Kies does not work with a Note II.
hey! any solution, ???
KIes 3
I downloaded the newest version of Kies, it is called Kies 3. My note 2 connects to it easily. I have not had to try the emergency repair. Here is the link for it. Hope it helps.
http://www.samsung.com/sg/support/usefulsoftware/KIES/JSP
I used the above mention Kies procedure to return my phone to working condition. I was also stuck on the Samsung logo for hours. I tried flashing several backups in Clockwork mod several times for several hours. My sd card would not mount as well. I could use wifi but no phone service. During the Kies process it prompted me to do an emergency repair which I did but this was only after doing a factory reset, and cache wipe, and dalvik cache wipe. I followed the steps by ShrekOpher and my phone was returned to 4.1.2 stock. My new problem is that I made the mistake of updating to 4.3 OTA and now have a locked bootloader. Everything works perfectly except now I'm not rooted. Screen Mirroring works perfect which was the main reason for my misadventure. I'm wondering if I root manually will my screen mirroring be disabled like it was when I was on the unofficial 4.3?
Screen mirroring checks for rooted status and won't run if detected.
See bottom of post #2 here for a link to a solution to that...
http://forum.xda-developers.com/showthread.php?t=2589891
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
reply
cameron213 said:
Did you get it working? Mine has the same issue. Sucks...
Click to expand...
Click to collapse
I had the same issue. I pulled my sd card and battery for 30 seconds. Then it went into recovery with vol + home and power. Hope this helps someone.
hatgirl223 said:
I downloaded the newest version of Kies, it is called Kies 3. My note 2 connects to it easily. I have not had to try the emergency repair. Here is the link for it. Hope it helps.
Good morning friend, how I stay KIES fixed the error? as I try to do the tutorial provided here in the forum, but by placing the model and S / N, Kies indicated that I had no copy to restore. Just yesterday I stay in this mode.
Can you help me?
Click to expand...
Click to collapse
Okay, so I rooted my phone back in December and had no problems at all with firmware 4.3. I had this app called "Clean Master" I think, so it analyzed my device to clean up "unnecessary" files and such. I go ahead a clean whatever it had "cleaned" and then I noticed that when I went into settings that it started freezing for about a minute or so and had to force close the settings. It also started to restart randomly at times and it got to the point where I just got fed up and looked to the internet. I decided to use Odin to Unroot my phone because at the time that's what I thought was causing the problem. This is where I think (I know) I screwed up. Instead of flashing the stock firmware for the T-Mobile Galaxy s4 I flashed this "GT-I9500-XSE-I9500XXUAME1-ROOTED_MAY4". I think I used this file for rooting but I downloaded so many files to get the rooting to work that I don't remember. This file is neither an .md5 file nor a .tar file. I don't know what I was thinking and I regret the decision. I started the transfer of whatever file that was to my phone using the Custom ROM download screen, and it only took about 4 seconds and said it passed. It reboots but ever since has been stuck on the Samsung Galaxy s4 screen. Recently it now says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. I've tried connecting the device via Kies but IT DOES NOT CONNECT. I'm beginning to think that I've just completely destroyed the phone and will be needing to by another. Any help would be much appreciated. I've tried everything I know. I've wiped the cache, wiped the data and factory reset the phone, but it won't reboot correctly. I'm stuck people. What can I do?
Can you get into download mode?
Sent from my SGH-M919 using XDA Premium 4 mobile app
The Sickness said:
Can you get into download mode?
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I can get into download mode yes.
re:
NEKTAR11 said:
I can get into download mode yes.
Click to expand...
Click to collapse
#1: Find the Odin flash rom/firmware for your phone and load Odin with it.
#2: Put the phone into download mode.
#3: plug usb cable into phone and computer.
#4: after you see [COM:xx] light up click START in Odin.
#5: when it gets done flashing let it reboot, have patience.
Forget all about these cleaning utilities, you can do all the cleaning
you want once the phone works properly and once it's rooted.
Only use CF-Autoroot to root the phone for best and trouble free results.
Here is the direct download link for CF-AutoRoot:
http://download.chainfire.eu/328/CF-Root1/CF-Auto-Root-jfltetmo-jfltetmo-sghm919.zip?retrieve_file=1
Good luck!
Misterjunky gives good instruction, if you can get into download mode your phone can be resurrected. In my early days of flashing, I thought I had created an expensive paperweight but the guys on here saved me. One thing, you may have to do a factory reset in stock recovery to get your phone to boot. Happened to me a couple of times.
Good luck.
Flash until you brick!
Ok, so I'm pretty sure I have the right Odin flash firmware, but it all goes really fast and after "aboot.mdn" it stops and it says FAIL. Ok so I tried the md5 file that came with the download and it went through fine, but It's still stuck on the Samsung Galaxy S4 screen. Do I need to restart the system now and try the firmware file?
NEKTAR11 said:
Ok, so I'm pretty sure I have the right Odin flash firmware, but it all goes really fast and after "aboot.mdn" it stops and it says FAIL. Ok so I tried the md5 file that came with the download and it went through fine, but It's still stuck on the Samsung Galaxy S4 screen. Do I need to restart the system now and try the firmware file?
Click to expand...
Click to collapse
Have you done a factory reset?
Sent from my SGH-M919 using Tapatalk
serio22 said:
Have you done a factory reset?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
I've done it more than I can count, yes.
re: do this next.
NEKTAR11 said:
I've done it more than I can count, yes.
Click to expand...
Click to collapse
Flash this TWRP custom recovery in ODIN then go into recovery mode and
do a full wipe, data, system, dalvik cache, cache and do a Factory Reset.
Here is the direct download link for the Odin flash TWRP recovery:
http://techerrata.com/file/twrp2/jfltetmo/openrecovery-twrp-2.6.3.1-jfltetmo.tar
Once that's done go into download mode and flash the
stock official M919 4.2.2 firmware (tar/md5) file.
Good luck!
SO I went into recovery mode, but it stays on the "teamwin" screen.
Pull the battery out of the phone, then put it back in and try to boot into recovery again. Sometimes, the recovery will hang like you described. You might have to repeat this process again and again until you get into the main menu of the recovery.
Okay, so I'm sure I'm doing everything right. I flashed the twrp recovery it restarts my phone. I held the power key, home key, and up key on the phone and released the power button when it shows the text on the top left showing that it is going to start recovery. It goes to a "teamwin" screen but freezes there. Truthfully, do you think I will be able to recover my phone, or will I need to send it in to samsung and pay 70 dollars plus the damages?
Misterjunky said:
Flash this TWRP custom recovery in ODIN then go into recovery mode and
do a full wipe, data, system, dalvik cache, cache and do a Factory Reset.
Here is the direct download link for the Odin flash TWRP recovery:
Once that's done go into download mode and flash the
stock official M919 4.2.2 firmware (tar/md5) file.
Good luck!
Click to expand...
Click to collapse
Do you think the reason why I can't flash the firmware is because I upgraded to 4.3 and it brought KNOX onto the phone?
NEKTAR11 said:
Okay, so I rooted my phone back in December and had no problems at all with firmware 4.3. I had this app called "Clean Master" I think, so it analyzed my device to clean up "unnecessary" files and such. I go ahead a clean whatever it had "cleaned" and then I noticed that when I went into settings that it started freezing for about a minute or so and had to force close the settings. It also started to restart randomly at times and it got to the point where I just got fed up and looked to the internet. I decided to use Odin to Unroot my phone because at the time that's what I thought was causing the problem. This is where I think (I know) I screwed up. Instead of flashing the stock firmware for the T-Mobile Galaxy s4 I flashed this "GT-I9500-XSE-I9500XXUAME1-ROOTED_MAY4". I think I used this file for rooting but I downloaded so many files to get the rooting to work that I don't remember. This file is neither an .md5 file nor a .tar file. I don't know what I was thinking and I regret the decision. I started the transfer of whatever file that was to my phone using the Custom ROM download screen, and it only took about 4 seconds and said it passed. It reboots but ever since has been stuck on the Samsung Galaxy s4 screen. Recently it now says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. I've tried connecting the device via Kies but IT DOES NOT CONNECT. I'm beginning to think that I've just completely destroyed the phone and will be needing to by another. Any help would be much appreciated. I've tried everything I know. I've wiped the cache, wiped the data and factory reset the phone, but it won't reboot correctly. I'm stuck people. What can I do?
Click to expand...
Click to collapse
Are you sure some other people have tried this file on a t-mobile variant? because GT-I9500 is indeed for a galaxy s4, but it's for the octa chipset, which is completely different from the t-mobile variant of the s4 since the t-mobile version is similar to GT-I9505, which is a quad core instead of a octa core
Just to give you guys a heads-up, I fixed my phone, but not by the ways you guys suggested. Not that I'm ungrateful, I am very happy you all took the time to help me out and I appreciate the suggestions. Thank you so much.
Oh and I fixed it by going into kies, clicking on "tools", "firmware upgrade and initialisation", and proceeded to follow the steps and type in my Model name and Serial Number.Fortunately they had the ability for my phone to return it COMPLETELY stock.
Thank you!
NEKTAR11 said:
Just to give you guys a heads-up, I fixed my phone, but not by the ways you guys suggested. Not that I'm ungrateful, I am very happy you all took the time to help me out and I appreciate the suggestions. Thank you so much.
Oh and I fixed it by going into kies, clicking on "tools", "firmware upgrade and initialisation", and proceeded to follow the steps and type in my Model name and Serial Number.Fortunately they had the ability for my phone to return it COMPLETELY stock.
Click to expand...
Click to collapse
OMG thank you for this. I actually registered just to thank you for this, I thought I was totally boned.
Hi guys,
New to XDA, I have a Note 2 which was getting a bit sluggish but worked fine, I rooted and custom flashed TWRP and saved a NANDROID BACKUP using TWRP to SDCARD and kept that on the desktop for safe keeping.
The phone worked fine after that for some time, Now spontaneously I woke up in the morning with the phone stuck on the samsung logo screen, so i knew it was softbricked but i cant understand how that happened.
First thing i tried apart from multiple restarts, removing battery etc, was then boot into custom recovery TWRP and try and restore from SDCARD nandroid backup. But it says EVERYTHING CAN'T be mounted!
E: Unable to find partition size for '/boot''
E: Unable to find partition size for '/recovery'
E: Unable to find partition size for '/modem'
E: Primary block device '/dev/block/mmcb1k0p16' for mount point '/data' is not present!
unable to mount '/data', EFS, System, cache and so forth.....
The phone was sincerely working fine and this happened seemingly randomly while asleep. Phone hadnt dropped and was connected to charger, and prior to this was restarted several times with no issues.
I have been looking at endless articles, I changed to CWM, TWRP, Philz and Stock Recovery and ALL OF THEM are unable to mount. So this does NOT seem to be a problem in the recovery. I used TWRP 2.8.0.1 for my Note 2 as well as 2.7.0.1. So I have a perfect NANDROID RESTORE on my SDCARD and DESKTOP to fix this but no way of mounting it to recovery?
Odin works fine and each time i flashed the recovery it would work fine. Is there some way of fixing it with ODIN?
Any input here would be greatly appreciated, and hopefully this helps someone else with the exact same issue.
Cheers.
the9kill said:
Hi guys,
New to XDA, I have a Note 2 which was getting a bit sluggish but worked fine, I rooted and custom flashed TWRP and saved a NANDROID BACKUP using TWRP to SDCARD and kept that on the desktop for safe keeping.
The phone worked fine after that for some time, Now spontaneously I woke up in the morning with the phone stuck on the samsung logo screen, so i knew it was softbricked but i cant understand how that happened.
First thing i tried apart from multiple restarts, removing battery etc, was then boot into custom recovery TWRP and try and restore from SDCARD nandroid backup. But it says EVERYTHING CAN'T be mounted!
E: Unable to find partition size for '/boot''
E: Unable to find partition size for '/recovery'
E: Unable to find partition size for '/modem'
E: Primary block device '/dev/block/mmcb1k0p16' for mount point '/data' is not present!
unable to mount '/data', EFS, System, cache and so forth.....
The phone was sincerely working fine and this happened seemingly randomly while asleep. Phone hadnt dropped and was connected to charger, and prior to this was restarted several times with no issues.
I have been looking at endless articles, I changed to CWM, TWRP, Philz and Stock Recovery and ALL OF THEM are unable to mount. So this does NOT seem to be a problem in the recovery. I used TWRP 2.8.0.1 for my Note 2 as well as 2.7.0.1. So I have a perfect NANDROID RESTORE on my SDCARD and DESKTOP to fix this but no way of mounting it to recovery?
Odin works fine and each time i flashed the recovery it would work fine. Is there some way of fixing it with ODIN?
Any input here would be greatly appreciated, and hopefully this helps someone else with the exact same issue.
Cheers.
Click to expand...
Click to collapse
It is possible that your Nandroid Backup is corrupt. It happens. Also, as you tried everything, I think you should flash fresh stock rom via odin.
Press thumps up if you found this suggestion helpful.
Sent from my GT-N7100 using Tapatalk
ceomaverick said:
It is possible that your Nandroid Backup is corrupt. It happens. Also, as you tried everything, I think you should flash fresh stock rom via odin.
Press thumps up if you found this suggestion helpful.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Hi ceomaverick,
Thanks for replying so fast, I may have not explained clearly but, the NANDROID BACKUP should be fine, its on the SD but cant be seen by any of the Recoverys (TWRP,CWM,stock,Philz) because nothing is able to MOUNT. So whether or not the nandroid backup is corrupt doesnt matter because we cant use it yet, as first problem is mounting to use the custom recovery restore.
Thanks for the suggestion about the Stock ROM , I have been downloading that for the past few hours! (XME-N7100XXUFNI4-20141020155451.zip) haha! That is what I will try next via Odin, just not sure how to do it safely. I will try and google and article for re-flashing stock rom via odin to make sure i tick all the correct boxes. If anything works will be back to update.
Cheers
P.s If anyone is interested in looking for this phones Stock ROM I found it here:
samsung-updates.com/device/?id=GT-N7100 (Select the one for your country/region)
the9kill said:
Hi ceomaverick,
Thanks for replying so fast, I may have not explained clearly but, the NANDROID BACKUP should be fine, its on the SD but cant be seen by any of the Recoverys (TWRP,CWM,stock,Philz) because nothing is able to MOUNT. So whether or not the nandroid backup is corrupt doesnt matter because we cant use it yet, as first problem is mounting to use the custom recovery restore.
Thanks for the suggestion about the Stock ROM , I have been downloading that for the past few hours! (XME-N7100XXUFNI4-20141020155451.zip) haha! That is what I will try next via Odin, just not sure how to do it safely. I will try and google and article for re-flashing stock rom via odin to make sure i tick all the correct boxes. If anything works will be back to update.
Cheers
Click to expand...
Click to collapse
Well, no hassle really. ODIN 3.09 does a great job. Just dump your file in AP tab and start after MD5 is verified. You should be fine. Welcome.
Sent from my GT-N7100 using Tapatalk
ceomaverick said:
Well, no hassle really. ODIN 3.09 does a great job. Just dump your file in AP tab and start after MD5 is verified. You should be fine. Welcome.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Bad news, Odin failed halfway through. Was able to boot back into download mode thankfully. But after rebooting again, seems the phone is now HardBricked. Meaning it wont even turn on.
Not sure what options are left now (if any). Anyone know what to do with a Note 2 hardbrick (apart from use it as an expensive door wedge).
Cheers
the9kill said:
Bad news, Odin failed halfway through. Was able to boot back into download mode thankfully. But after rebooting again, seems the phone is now HardBricked. Meaning it wont even turn on.
Not sure what options are left now (if any). Anyone know what to do with a Note 2 hardbrick (apart from use it as an expensive door wedge).
Cheers
Click to expand...
Click to collapse
This should not happen unless the cable or the usb ports are faulty. ( or if u have not followed the instructions correctly )
Anyway,
Can u still go to download mode? If yes, try a different cable and flash.
If no, use a USB jig to revive your phone. Ebay has them in plenty. With this you might get into download mode.
Also, are u flashing the correct firmware?
I have flashed custom ROMs n number of times without a single instance of failure.
Best of luck.
Sent from my GT-N7100 using Tapatalk
ceomaverick said:
This should not happen unless the cable or the usb ports are faulty. ( or if u have not followed the instructions correctly )
Anyway,
Can u still go to download mode? If yes, try a different cable and flash.
If no, use a USB jig to revive your phone. Ebay has them in plenty. With this you might get into download mode.
Also, are u flashing the correct firmware?
I have flashed custom ROMs n number of times without a single instance of failure.
Best of luck.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Hi again,
Yes, I can fully appreciate why you would say that, from what I see ODIN is very straight forward and unless you do something totally (silly), like jiggle the cable or do something midway it should not hardbrick. Therefore it makes sense you suggesting the cable is faulty, but it seemed to copy over 32GB of data seemlessly in one go. Although i will change the cable as a precaution as there is a slight cut.
When I say hardbricked, I mean hardbricked as in no recovery and no download mode, and no display whatsoever no matter what you do.
[UPDATE] Okay, the strangest thing happened. After a whole day of charging the phone, sometimes trying it on for luck, hoping something would happen. I went to the doctors and came back, and oddly enough the screen had life!!! Yes, this gets bizarre, I repeat a clearly hardbricked phone resurrected back to life with a screen showing ("A firmware upgrade encountered an error, please retry with kies") or something like that, so overjoyed with this sign of life I carefully put it into download mode and its now waiting.... But before I try Odin again, I think I will take a leaf from Ceomavericks suggestion and get a brand new cable from another samsung phone and use that this time.
By the way Ceomaverick, last time i just tried to flash to stock rom using AP, and kept autorebook and Ftime checked.
This time I am seeing on a thread to do the following, please advise (given that my TWRP doesnt mount anything at all).
It says do this: from: http://forum.xda-developers.com/showpost.php?p=43760271&postcount=22
Open ODIN, and check Re-Partition, Nand Erase All, Auto Reboot and F. Reset Time. Uncheck all other boxes. Click the PIT button and select the PIT file appropriate for your device (16GB or 32GB). Click the PDA file and choose the Stock Rom you downloaded. Press start and wait.
File Type: rar PIT_t03g_0907_16GB.rar - [Click for QR Code] (899 Bytes, 84 views)
File Type: zip BOOTLOADER_N7100.zip - [Click for QR Code] (1.03 MB, 75 views)
click start.
If everything goes well, the process should succeed and the phone should reboot. Don't wait for the phone to boot into android. Immediatly boot into recovery, factory reset the phone and wipe cache. Reboot to Android.
Now, if everything worked well, your phone should boot into Android. And then sort out the sleep of death issue.
I think I will wait for some feedback before doing this and just enjoy that my phone is mysteriously back in download mode, perhaps a hardware issue......
Another thread reading http://www.theandroidsoul.com/unbrick-restore-samsung-galaxy-note-2-gt-n7100/
Cheers
UPDATE:
Now that we are back to softbrick, I tried download mode and ODIN again, this time it fails right near the end. Last time it failed somewhere in the middle. So it seems to randomly fail and this is with the brand new USB Sony PS4 Cable. I ditched the worn out samsung cable because of the first fail. So twice its failed, but at different points. If it doesnt hardbrick again this time I suppose I will keep repeating till it passes.
For now just a straight rom flash, not sure if i should repartition with the before mentioned PIT Files and bootloader etc. Wont do that unless im told.
Thanks
Attached (Fail Image)
the9kill said:
UPDATE:
Now that we are back to softbrick, I tried download mode and ODIN again, this time it fails right near the end. Last time it failed somewhere in the middle. So it seems to randomly fail and this is with the brand new USB Sony PS4 Cable. I ditched the worn out samsung cable because of the first fail. So twice its failed, but at different points. If it doesnt hardbrick again this time I suppose I will keep repeating till it passes.
For now just a straight rom flash, not sure if i should repartition with the before mentioned PIT Files and bootloader etc. Wont do that unless im told.
Thanks
Attached (Fail Image)
Click to expand...
Click to collapse
Good news is you can visit download mode.
Ok. Alternative.
Download Philz recovery latest version. Flash it via ODIN. If it succeeds, u can flash a touchwiz rom
If that fails, then your partition table is corrupt (asumming thr r no hardware issues. )
Download firmware from different region for your note 2. India maybe. And flash them. May be this might do the trick.
If all above fails, it has to b a hardware issue.
Sent from my GT-N7100 using Tapatalk
ceomaverick said:
Good news is you can visit download mode.
Ok. Alternative.
Download Philz recovery latest version. Flash it via ODIN. If it succeeds, u can flash a touchwiz rom
If that fails, then your partition table is corrupt (asumming thr r no hardware issues. )
Download firmware from different region for your note 2. India maybe. And flash them. May be this might do the trick.
If all above fails, it has to b a hardware issue.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Hi ceomaverick!
Just going to highlight what you said with a few questions please.
"Good news is you can visit download mode. " - Yes, and once I tried to flash it for the second time it got hardbricked round 2. So somehow me flashing it gives it a seemingly temporary hardbrick. That was some hours ago and still no way to turn it on or get any sign of life, just like yesterday before it miraculously came to life again. Which since it has happened once I am guessing it will come back to life again as i followed the exact same procedure as before but Odin failed much later on into the process rather than halfway through.
"Download Philz recovery latest version. Flash it via ODIN. If it succeeds, u can flash a touchwiz rom" - Okay I had Philz before I will reflash it when it comes up and i suppose search for a note 2 touchwiz rom. Philz as before wont be able to mount anything though, even sim card. As i did this prior none of them, TWRP, Philz or CWM can mount anything. So even if i have the ROM file i wont be able to use it on SD if the SD doesnt mount, but i can try it through Odin?
"If that fails, then your partition table is corrupt (asumming thr r no hardware issues. )" - I suspect this is the case hence not mounting, so do I use that PIT file and select Re-Partition in Odin to resolve that?
"Download firmware from different region for your note 2. India maybe. And flash them. May be this might do the trick." - Good idea, while the hardbrick is waiting to resurrect (LOL), I will start a download.
"If all above fails, it has to b a hardware issue. " - Again something I suspect, from forum could be this dreaded eMMC "insane samsung chip" problem which is as far as i know a 16gb internal SD? If so, perhaps there is a way to put in a 16gb SD and edit boot to mount from there as internal instead from the eMMC? Sorry if thats way out there, but i read something like this once.
Appreciate the help, waiting for it to spring back into life
the9kill said:
Hi ceomaverick!
Just going to highlight what you said with a few questions please.
"Good news is you can visit download mode. " - Yes, and once I tried to flash it for the second time it got hardbricked round 2. So somehow me flashing it gives it a seemingly temporary hardbrick. That was some hours ago and still no way to turn it on or get any sign of life, just like yesterday before it miraculously came to life again. Which since it has happened once I am guessing it will come back to life again as i followed the exact same procedure as before but Odin failed much later on into the process rather than halfway through.
"Download Philz recovery latest version. Flash it via ODIN. If it succeeds, u can flash a touchwiz rom" - Okay I had Philz before I will reflash it when it comes up and i suppose search for a note 2 touchwiz rom. Philz as before wont be able to mount anything though, even sim card. As i did this prior none of them, TWRP, Philz or CWM can mount anything. So even if i have the ROM file i wont be able to use it on SD if the SD doesnt mount, but i can try it through Odin?
"If that fails, then your partition table is corrupt (asumming thr r no hardware issues. )" - I suspect this is the case hence not mounting, so do I use that PIT file and select Re-Partition in Odin to resolve that?
"Download firmware from different region for your note 2. India maybe. And flash them. May be this might do the trick." - Good idea, while the hardbrick is waiting to resurrect (LOL), I will start a download.
"If all above fails, it has to b a hardware issue. " - Again something I suspect, from forum could be this dreaded eMMC "insane samsung chip" problem which is as far as i know a 16gb internal SD? If so, perhaps there is a way to put in a 16gb SD and edit boot to mount from there as internal instead from the eMMC? Sorry if thats way out there, but i read something like this once.
Appreciate the help, waiting for it to spring back into life
Click to expand...
Click to collapse
If the firmware from other region fails, then find pit file for 16gb to flash. If that too fails, I think your phone needs hardware repair.
Sent from my GT-N7100 using Tapatalk
My daughter's note 2, which looks to be in perfect condition, was running dirty unicorn. She messages me in a panic because the phone turned off on her, and wouldn't reboot.
I could get into recovery, but many of the options like factory reset wouldn't work. Reformatting /cache gives an error with ext4 and can't write, and at the bottom of some of the screens is an error about unable to access some log files in the /cache directory. Going to install zip to reinstall dirty unicorn doesn't seem to do anything, it can't find any files.
Wipe system gives errors like "format_volume: make_extf4fs failed on /dev/block/mmcblk0p12". It can't mount /data, just gives an error.
I tried reflashing the stock mj4 via odin, which ran successfully, but didn't resolve anything.
Tried using KIES 2.6, which did go into download mode and said it downloaded a bunch of stuff and then flashed the phone, but it's still stuck at the bootloader.
I tried flashing a bootloader, but am unclear of how to flash the param file if necessary (does it go in bootloader? PDA? what slot in odin?).
I need some ideas. Maybe the flash has died on it, and it's unrecoverable, but it's in such perfect shape that I hate to just toss it.
I have recover 6.0.4.3 (CWM) installed, and can still get into it. But upon loading recovery, it gives me errors like "Can't mount /cache/recovery/command", "Can't open /cache/recovery/last_log", etc.
Any help appreciated.
mrcpu said:
My daughter's note 2, which looks to be in perfect condition, was running dirty unicorn. She messages me in a panic because the phone turned off on her, and wouldn't reboot.
I could get into recovery, but many of the options like factory reset wouldn't work. Reformatting /cache gives an error with ext4 and can't write, and at the bottom of some of the screens is an error about unable to access some log files in the /cache directory. Going to install zip to reinstall dirty unicorn doesn't seem to do anything, it can't find any files.
Wipe system gives errors like "format_volume: make_extf4fs failed on /dev/block/mmcblk0p12". It can't mount /data, just gives an error.
I tried reflashing the stock mj4 via odin, which ran successfully, but didn't resolve anything.
Tried using KIES 2.6, which did go into download mode and said it downloaded a bunch of stuff and then flashed the phone, but it's still stuck at the bootloader.
I tried flashing a bootloader, but am unclear of how to flash the param file if necessary (does it go in bootloader? PDA? what slot in odin?).
I need some ideas. Maybe the flash has died on it, and it's unrecoverable, but it's in such perfect shape that I hate to just toss it.
I have recover 6.0.4.3 (CWM) installed, and can still get into it. But upon loading recovery, it gives me errors like "Can't mount /cache/recovery/command", "Can't open /cache/recovery/last_log", etc.
Any help appreciated.
Click to expand...
Click to collapse
The other weird thing is that I used odin 3.06 to flash twrp 2.8.5, or at least attempt to, download processed, device reset, but recovery is still CWM 6.0.4.3. WTH?
Ok check this thread where I just helped fix a note 2, simular to your situation ok.
Plenty of links in there for you. Keep in mind everything in this thread I'm sending you too it's for the AT&T i317 ok.
http://forum.xda-developers.com/showthread.php?p=59000961
Which I'm sure that is what you have, posting your problem in the Att q&a thread.
Bajanman said:
Ok check this thread where I just helped fix a note 2, simular to your situation ok.
Plenty of links in there for you. Keep in mind everything in this thread I'm sending you too it's for the AT&T i317 ok.
http://forum.xda-developers.com/showthread.php?p=59000961
Which I'm sure that is what you have, posting your problem in the Att q&a thread.
Click to expand...
Click to collapse
Correct, it is an AT&T. I have tried the options in that thread, but I swear, nothing I flash actually "sticks". I've used odin 3.06, put the files in PDA, plugged it in in download mode, the progress bar appears on both odin and the phone, it resets, it reboots, and nada. Hung.
I can't even flash a replacement recovery, nothing "sticks". I've used KIES to flash, it tells me it's successful, but I still have CWM 6.0.4.3. I've tried the original 4.1.1, NJ1 (rooted), I've tried flashing a bootloader, then tried the one with the param file attached, I downloaded a pit file, followed the directions on that page with the Re-partition option, and I still can't get anywhere with it.
If I cold even just get a different recovery installed, just so that I *know*, my odin is OK, then I'd feel better about making progress.
I've tried to flash philz_touch 6.48.4, openrecovery-twrp-2.8.5 through odin, and I can't even get the CWM recovery replaced. Odin reports success, reboots the device, frozen.
I swear, if this was one of my servers at work, I'd figured the NSA has hacked the firmware to just discard writes and report back success.
I'm not crystal clear in ODIN how to flash bootloaders, on one hand, presumably, the "bootloader" button, but one guide shows the bootloader file being put in PDA, so who knows. I may have ended up with a bootloader mismatch, but I thought flashing the latest stock recoveries.
FWIW, the phone was running Dirty Unicorn, although I'm unsure of specifically which version, she's had it for a while.
Thanks for any help.
Just realized something.
If I hold down the power/vol down/home and boot into download mode, I get the little red "odin mode" at the top left, 4 lines of text about custom, etc, and then the green android icon.
If I boot into recovery, then use it to boot into download mode, the green android is there, but none of the text (odin mode, etc) is on the screen. Is this normal?
I have also been having some strangeness with my Telus Note II. Very similar symptoms to what you're describing. One morning I woke up to my phone stuck on the Samsung logo as the phone must have rebooted itself overnight. When I tried to reboot it would freeze at the same spot once again. I tried to go into recover (TWRP) and it wouldn't, and a subsequent reboot left me in a boot loop.
Nothing I tried would help. I couldn't get into TWRP. Using ODIN 3.07 I put on CWM and I was able to get into recovery now, but nothing in it worked. Finally I tried using ODIN to put on CF-Auto-Root-t0ltecan-t0ltevl-sghi317m and I was finally able to get into a recovery that allowed me to do a factory reset. Once I did that I was able to boot up the phone.
I then re-installed TWRP and restored a back up that I had, and everything was normal again. The phone was running great. However, sometime at night things get messed up again. The phone has either reboot itself, and get's stuck again. I then have to repeat this whole process. During the day, the phone runs amazing. It almost seems to run better than before. However at night, if I'm on battery it will get messed up again.
I hope this helps you. Good luck.
have you tried all this using the same computer and usb cable? i would try a different computer, port, usb and re download all files again. perhaps use a different version of odin. good luck:fingers-crossed:
It's the same computer and cable I do my Note 3, and kindle fire 8.9, and with a different cable my nook HD, so I'm skeptical that it's any of those pieces, but for the heckuvit, I will try a different one.
Note 2 GT N 7100 --Stuck on CWM 6.0.4.3
gizhola said:
I have also been having some strangeness with my Telus Note II. Very similar symptoms to what you're describing. One morning I woke up to my phone stuck on the Samsung logo as the phone must have rebooted itself overnight. When I tried to reboot it would freeze at the same spot once again. I tried to go into recover (TWRP) and it wouldn't, and a subsequent reboot left me in a boot loop.
Nothing I tried would help. I couldn't get into TWRP. Using ODIN 3.07 I put on CWM and I was able to get into recovery now, but nothing in it worked. Finally I tried using ODIN to put on CF-Auto-Root-t0ltecan-t0ltevl-sghi317m and I was finally able to get into a recovery that allowed me to do a factory reset. Once I did that I was able to boot up the phone.
I then re-installed TWRP and restored a back up that I had, and everything was normal again. The phone was running great. However, sometime at night things get messed up again. The phone has either reboot itself, and get's stuck again. I then have to repeat this whole process. During the day, the phone runs amazing. It almost seems to run better than before. However at night, if I'm on battery it will get messed up again.
I hope this helps you. Good luck.
Click to expand...
Click to collapse
Dear friends, sorry for my interference, i having CWM recovery v 6.0.4.3 on GT N7100, i used to flash omega ROM 4.3, everything went well until i got stuck on Samsung log and the phone did want restart, i decided to go on CWM recovery, stunned with this message
E: Can't mount /cache/recovery/command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
Still I can go on download mode, I tried use odin to flash stock rom but failed it takes me always to CWM v 6.0.4.3 where it stuck and dont allow me to format or do any thing except my external sd1 that I tried to flash from but returned to same prob ( CWM v 6.0.43)
also I tried to flash tried twrp 2.8.0.4 but failed
the prob is my internal sd can't be mounted and whatever i do don't pass
I read in your post something about flashing auto root in odin or fix CWM root
can you help please Im stuck in CWM v 6.0.4.3
So I attempted to flash the renegade rom...do not think this has anything to do with that in particular, but now I'm stuck on the screen that says the software was not installed correctly. Holding down the power, volume up and home buttons will get me back to odin but when I try to flash anything in Odin (3.10.6), it gets about 20% done and fails. I can't get into the stock recovery again. Before this happened, I was on stock OI1 and had developer options up and bootloader option on , I tried to flash TWRP but kept getting an error, then I had flashed the unikernel (V6 I believe). The phone booted correctly, but the touch screen didn't work. I rebooted several time and tried again, still screen problem. I went into the stock recovery and did a factory reset, booted, screen still didn't work. I went back to odin tried to flash the G920PVPU3BOI1_G920PSPT3BOI1_G920PVPU3BOI1_HOME.tar, but it halted with the fail message at about 20%. Tried again, failed at same time point. Very frustrating because I've successfully rooted and installed multiple roms on my S4 and Evo prior.
At this point I am stuck in the blue screen that says you need to do smart switch to do an emergency recovery, I can get this over to odin, but not recovery. I tried both smart switch and Kies, and both say the phone isn't supported by the software(s). Yes, the drivers were installed prior to. I've tried waiting for the battery to discharge as well, nothing.
I'm at a loss of what to do now. Phone is inoperable and I can't even get into a screen that tells me anything about versions of hardware or software. The barcode is still intact and I can still get into Odin, but nothing more than that. Stock kernel to flash? Why won't odin finish the upgrades? Anything?
The phone is about to go in the trash...Help!
sfinkedbeef said:
So I attempted to flash the renegade rom...do not think this has anything to do with that in particular, but now I'm stuck on the screen that says the software was not installed correctly. Holding down the power, volume up and home buttons will get me back to odin but when I try to flash anything in Odin (3.10.6), it gets about 20% done and fails. I can't get into the stock recovery again. Before this happened, I was on stock OI1 and had developer options up and bootloader option on , I tried to flash TWRP but kept getting an error, then I had flashed the unikernel (V6 I believe). The phone booted correctly, but the touch screen didn't work. I rebooted several time and tried again, still screen problem. I went into the stock recovery and did a factory reset, booted, screen still didn't work. I went back to odin tried to flash the G920PVPU3BOI1_G920PSPT3BOI1_G920PVPU3BOI1_HOME.tar, but it halted with the fail message at about 20%. Tried again, failed at same time point. Very frustrating because I've successfully rooted and installed multiple roms on my S4 and Evo prior.
At this point I am stuck in the blue screen that says you need to do smart switch to do an emergency recovery, I can get this over to odin, but not recovery. I tried both smart switch and Kies, and both say the phone isn't supported by the software(s). Yes, the drivers were installed prior to. I've tried waiting for the battery to discharge as well, nothing.
I'm at a loss of what to do now. Phone is inoperable and I can't even get into a screen that tells me anything about versions of hardware or software. The barcode is still intact and I can still get into Odin, but nothing more than that. Stock kernel to flash? Why won't odin finish the upgrades? Anything?
Odin Screen Reads:
ODIN MODE (red)
PRODUCT NAME: SM-G920P (white)
CURRENT BINARY: Samsung Official (white)
SYSTEM STATUS: Custom (White)
FRP LOCK: OFF (white)
Secure Download: Enabled (blue)
KNOW WARRANRY VOID: 1 (0x0384) (gray)
AP SWREV: B:3 K:2 S:2 (gray)
The phone is about to go in the trash...Help!
Click to expand...
Click to collapse
What I would recommend doing is to try using Kies 3 its pretty much Samsung's take on iTunes. It maybe able to help you. Otherwise, try redownloading the latest tar avabile which is: OJ7 also, try Odin v3.10.7
1619415 said:
What I would recommend doing is to try using Kies 3 its pretty much Samsung's take on iTunes. It maybe able to help you. Otherwise, try redownloading the latest tar avabile which is: OJ7 also, try Odin v3.10.7
Click to expand...
Click to collapse
Thanks for replying.
I tried Kies and Smart Switch, but both did not recognize phone. I did manage to find out that TWRP has a sprint variant and that it seems to be incorrectly labeled in many posts. The sprint variant is 2.8.7.0 NOT 2.8.7.1. I managed to flash it in ODIN and now it boots into Recovery, which is a start. I tried applying the renegade rom, but it wouldn't finish and I'm left with a 'no OS detected, do you want to reboot?' from TWRP.
TWRP website isn't much help (but I love that product). At this point, still cannot tell what firmware is on device and where to go from here. I think I may need a recovery of some sort, but don't have. Tried flashing OJ7 tar as recommeded but it continues to fail when it hits the 'system' part of the download.
Still need advice/help....etc.
Since you are now in recovery, wipe everything!
Cache, System, Data, Internal Data and Dalvik Cache. After that, reboot into Odin and try restoring once more in odin. If that does not work, then wipe everything again and try installing Renegade once more.
1619415 said:
Since you are now in recovery, wipe everything!
Cache, System, Data, Internal Data and Dalvik Cache. After that, reboot into Odin and try restoring once more in odin. If that does not work, then wipe everything again and try installing Renegade once more.
Click to expand...
Click to collapse
Thank for the reply. I did just that and after installing Renegade with kernel version 8, three times, the phone is up and running. Really appreciate the help.
sfinkedbeef said:
Thank for the reply. I did just that and after installing Renegade with kernel version 8, three times, the phone is up and running. Really appreciate the help.
Click to expand...
Click to collapse
, NP glad I could help.
no roms install on my s6 edge after forget to copy rooms file into TWRP
1619415 said:
, NP glad I could help.
Click to expand...
Click to collapse
now my phone in download " blue screen " mode
please someone help me :crying:
billyfatra said:
now my phone in download " blue screen " mode
please someone help me :crying:
Click to expand...
Click to collapse
You should be able to use odin on your PC tp send an image to your phone.
Lookup, for example, how to root your phone in these threads.
Sent from my SM-G920P using Tapatalk