[Q] What do I flash to get SGH-M919 working again? - T-Mobile Samsung Galaxy S 4

Hi xda, I hope your Friday is going well.
EDIT: My calling problem was not fixed. I reflashed 4.4.2 NB4 Modem (twice to make sure it stuck) and the calling still does not work. Did something just completely fry when I had CM11 on this thing? Any ideas anybody? I don't even hear a dial tone if I am the one dialing out, the call still goes through though.
Everything below was my original post which has been resolved, didn't want to start a new thread though.
-----------------------------------------------------------------------------------------
TL;DR: My T-Mobile Samsung Galaxy S 4 (SGH-M919) is unable to boot stock rom, and I am unable to enter recovery. I get seandroid messages trying to do either. Fortunately, the phone can enter download mode. What do I need to do or flash to get this phone booting again? Thank you in advance for taking the time to read and help out.
Below is the long story with details:
1. The phone was given to me running stock Android/TouchWiz. Unfortunately, I do not know what version but I assume it was whatever was the latest version as of late April.
2. I rooted the phone using Odin and CF Auto Root.
3. I created a backup of this newly rooted stock rom.
4. I flashed Cyanogenmod 11
5. After a while I discovered that I could answer calls but I could not hear nor be heard during the call.
6. I restored to the stock rom using the backup I made in step 3.
7. The calling issue continued, so I figured I would just unroot and go back to like-new factory settings. This way I could take the phone in to be repaired or whatever.
8. Following this thread: http://forum.xda-developers.com/showthread.php?t=2336392, I attempted to flash k0nane's UVUAMDL Official Tar
9. Odin got stuck connecting to my device, I believe it was because I did not run Odin as admin. I pulled the battery and repeated this step while running Odin as admin.
10. The flash was successful, however during the phone's first boot it got stuck on the T-Mobile splash screen for about 30 minutes or so. I pulled the battery again.
11. Anytime I put the battery back in the phone, it will attempt to boot and hang at the T-Mobile screen, I believe this is a boot loop?
Looking online, people suggest going into recovery and wiping but I cannot enter recovery. I just get the seandroid not enforcing messages. I'm very hesitant to keep looking through the forums and trying things because I feel like I'm on the edge of bricking the phone if I haven't already.

I don't think the flash was successful because it wouldn't give you those messages, and you would need to flash either 4.3 or 4.4.2 not 4.2.2 (MDL) Try flashing a newer firmware version.. If it was updated to the newest then I would try 4.4.2
Sent from my SGH-M919 using Tapatalk

serio22 said:
I don't think the flash was successful because it wouldn't give you those messages, and you would need to flash either 4.3 or 4.4.2 not 4.2.2 (MDL) Try flashing a newer firmware version.. If it was updated to the newest then I would try 4.4.2
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Ok so I flashed the wrong rom then. I hate to ask but where could I find a 4.4.2 stock rom? I just found a rom I believe will work but the file is titled "M919UVUFNB4_M919TMBFNB4_TMB" not sure if this is 4.4.2 or newer?

You download the stock 4.4.2 ROM from sammobile:
http://www.sammobile.com/firmwares/
Sent from my SGH-M919 using XDA Premium 4 mobile app

Android_Monsters said:
You download the stock 4.4.2 ROM from sammobile:
[link removed]
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
This is where I obtained the rom above that I wasn't sure was the newest.
I flashed this rom and everything worked, thank you both.
Any ideas on what happened with the phone call issue? My friend that gave me the phone said it was working just fine when she had it, so I assume somehow the rooting or CM11 screwed something up? Weirdly, calling through WiFi works just fine.

THVRSDAY said:
This is where I obtained the rom above that I wasn't sure was the newest.
I flashed this rom and everything worked, thank you both.
Any ideas on what happened with the phone call issue? My friend that gave me the phone said it was working just fine when she had it, so I assume somehow the rooting or CM11 screwed something up? Weirdly, calling through WiFi works just fine.
Click to expand...
Click to collapse
The only thing that can foul up your phone like that would be a bad cm flash or preflash, it's super important to read and read again, check the thread for support from members and resolutions to problems before you consider the build for your phone. Ask questions and double check everything before you take the plunge.
I assume that the calling problem is fixed, a corrupt modem may cause that and re flashing the modem will correct this.
Pp.
sent from my bluetooth controlled toaster that also takes pictures.

PanchoPlanet said:
The only thing that can foul up your phone like that would be a bad cm flash or preflash, it's super important to read and read again, check the thread for support from members and resolutions to problems before you consider the build for your phone. Ask questions and double check everything before you take the plunge.
I assume that the calling problem is fixed, a corrupt modem may cause that and re flashing the modem will correct this.
Pp.
sent from my bluetooth controlled toaster that also takes pictures.
Click to expand...
Click to collapse
The calling problem was not fixed. I reflashed 4.4.2 NB4 Modem (twice to make sure it stuck) and the calling still does not work. Did something just completely fry when I had CM11 on this thing? Any ideas anybody?

THVRSDAY said:
The calling problem was not fixed. I reflashed 4.4.2 NB4 Modem (twice to make sure it stuck) and the calling still does not work. Did something just completely fry when I had CM11 on this thing? Any ideas anybody?
Click to expand...
Click to collapse
Did you flash the NB4 firmware twice? Firmware, not modem
Sent from my SGH-M919 using Tapatalk

serio22 said:
Did you flash the NB4 firmware twice? Firmware, not modem
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
No, I only flashed the NB4 modem bin found here: http://forum.xda-developers.com/showthread.php?t=2678774. I need to flash the whole NB4 tar twice as well?

THVRSDAY said:
No, I only flashed the NB4 modem bin found here: http://forum.xda-developers.com/showthread.php?t=2678774. I need to flash the whole NB4 tar twice as well?
Click to expand...
Click to collapse
Well modem didn't work so try the firmware
Sent from my SGH-M919 using Tapatalk

serio22 said:
Well modem didn't work so try the firmware
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
I flashed the NB4 tar from sammobile twice, calls still not working. I feel like I'm not flashing the correct thing or something.
Using the Android System Info app, every entry has something in it except for Radio. It just says "Radio: unknown". Does this have anything to do with anything?

THVRSDAY said:
I flashed the NB4 tar from sammobile twice, calls still not working. I feel like I'm not flashing the correct thing or something.
Using the Android System Info app, every entry has something in it except for Radio. It just says "Radio: unknown". Does this have anything to do with anything?
Click to expand...
Click to collapse
That is a problem.. How did you get this device?
Sent from my SGH-M919 using Tapatalk

serio22 said:
That is a problem.. How did you get this device?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
My friend gave the phone to me. She got an S5 and didn't want to bother with selling this S4 so she just gave it to me. It was completely pure and stock, with calls working. Something screwed up during the CM11 flash I guess.
WiFi calls still work, everything works except calls.
Maybe I'm doing something wrong? I flashed the sammobile NB4 tar twice via PDA in Odin as usual. For the modem, I flashed the modem bin via Phone in Odin twice. Thank you for your help, by the way.

New term for CM, "complicated maneuver" ,.
Reflashing firmware may do it. Can't hurt either.
Pp.
Sent from my SGH-M919 using XDA Premium 4 mobile app

THVRSDAY said:
My friend gave the phone to me. She got an S5 and didn't want to bother with selling this S4 so she just gave it to me. It was completely pure and stock, with calls working. Something screwed up during the CM11 flash I guess.
WiFi calls still work, everything works except calls.
Maybe I'm doing something wrong? I flashed the sammobile NB4 tar twice via PDA in Odin as usual. For the modem, I flashed the modem bin via Phone in Odin twice. Thank you for your help, by the way.
Click to expand...
Click to collapse
I think something definitely went wrong.. Try flashing this firmware, it flashes better for most people http://www.cheatersedge.org/android/m919/M919UVUFNB4_M919TMBFNB4_TMB_FENNY_FIXED.zip after that, factory reset and if that still doesn't work then you have a bigger problem.. Good luck!
Sent from my SGH-M919 using Tapatalk

serio22 said:
I think something definitely went wrong.. Try flashing this firmware, it flashes better for most people http://www.cheatersedge.org/android/m919/M919UVUFNB4_M919TMBFNB4_TMB_FENNY_FIXED.zip after that, factory reset and if that still doesn't work then you have a bigger problem.. Good luck!
Click to expand...
Click to collapse
I flashed both Fenny's firmware and a baseband he also provided. Did both twice, and calls are still not working.
I was doing some research on this whole "Radio: Unknown" thing and I started seeing threads talking about flashes corrupting the phone's EFS partition. I never made a backup of mine, so I have nothing to restore to. Is it possible that I could use someone else's EFS backup and then use it to restore my phone's EFS partition? Does it work like that?

THVRSDAY said:
I flashed both Fenny's firmware and a baseband he also provided. Did both twice, and calls are still not working.
I was doing some research on this whole "Radio: Unknown" thing and I started seeing threads talking about flashes corrupting the phone's EFS partition. I never made a backup of mine, so I have nothing to restore to. Is it possible that I could use someone else's EFS backup and then use it to restore my phone's EFS partition? Does it work like that?
Click to expand...
Click to collapse
No it will not work, this is device specific afaik.. Like I said earlier, I recommend you call T-Mobile for a replacement
Sent from my SGH-M919 using Tapatalk

Flashing modems and such with a custom rom installed often fails. Did you try doing a restore to full stock using Odin?
It sounds like the phoen has Android 4.4 on it already so you will need to flash the full 4.4 package (can't go back to 4.3 or 4.2)
Try and, boot hte phoen without modifying it, and see if calls work then.
The EFS thing is about the IMEI number. Does your device show an IMEI number in settings? If it does, your EFS isn't the problem. If it doesn't....well then yeah. Problem is pretty much narrowed down.

Skipjacks said:
Flashing modems and such with a custom rom installed often fails. Did you try doing a restore to full stock using Odin?
It sounds like the phoen has Android 4.4 on it already so you will need to flash the full 4.4 package (can't go back to 4.3 or 4.2)
Try and, boot hte phoen without modifying it, and see if calls work then.
The EFS thing is about the IMEI number. Does your device show an IMEI number in settings? If it does, your EFS isn't the problem. If it doesn't....well then yeah. Problem is pretty much narrowed down.
Click to expand...
Click to collapse
I have restored the phone to full stock and have been using it that way since I started this thread. Everything is just like fresh from the factory (except for the knox counter being tripped obviously). Calls still didn't work. An IMEI number still shows up the phone's settings. Using WiFi calling hasn't been that bad at all, but I'm screwed in the case of a real emergency with this thing.

Related

[Q] Unable to flash Stock ROM

I bought a T-Mobile Galaxy S 3 LTE with model number SGH-T999L. I used Odin V3 1.85 to flash TWRP recovery and CyanogenMod 10.0.0.
Everything went well but my camera doesn't work. On launching the camera, I get a "Can't connect to camera" error and it quits. The same behavior is observed when using other camera apps. I tried the instructions in this thread(http://forum.xda-developers.com/showthread.php?t=2239414) but it did not fix my problem. I now want to go back to my stock ROM. I successfully downloaded and flashed stock recovery using Odin. However, Odin fails when I try to flash the stock ROM obtained from the samsung website. It gives me a "write failed" error and stops. Any tips or suggestions to help me out would be appreciated. Thanks
Is it supposed to use T999 firmware?
Only odin flash T999L firmware. I dont see it released yet at samsing-updates.com though.
Maybe samfirmware.com? I can look later.
Sent from my SGH-T999 using xda premium
re: sure fix
newidforu said:
I bought a T-Mobile Galaxy S 3 LTE with model number SGH-T999L. I used Odin V3 1.85 to flash TWRP recovery and CyanogenMod 10.0.0.
Everything went well but my camera doesn't work. On launching the camera, I get a "Can't connect to camera" error and it quits. The same behavior is observed when using other camera apps. I tried the instructions in this thread(http://forum.xda-developers.com/showthread.php?t=2239414) but it did not fix my problem. I now want to go back to my stock ROM. I successfully downloaded and flashed stock recovery using Odin. However, Odin fails when I try to flash the stock ROM obtained from the samsung website. It gives me a "write failed" error and stops. Any tips or suggestions to help me out would be appreciated. Thanks
Click to expand...
Click to collapse
Why not reflash the stock ODIN flash rom and make sure it all works ok for you, that will tell you exactly what the problem is.
If the stock rom is working properly, then there is only one thing left which is the culprit and that is the CM10/AOKP/AOSP
or PORTED roms which many people seem to like flashing.
The CM10/AOKP/AOSP and ported roms are excellent if you are a developer or if you like to do a lot of experimentation with your phone.
So the thing to do now is reboot your phone to recovery mode, do a "Factory Reset", "Wipe Cache", "Wipe System" and "Wipe Dalvik".
When that's done Open Odin and put the stock rooted T999 Tmobile Jellybean 4.1.2 into Odin's PDA slot, go into download mode
and once you see Odin is connected to the phone start the flash. Have patience for the phone to boot after its done flashing.
Here is the stock rooted Odin flash T999 Tmobile Jellybean 4.1.2 rom that you can download if you like: T999_UVDMD5
Official JB Firmware - Latest JB 4.1.2 Firmware
My suggestion to you is to only flash Samsung T999 Tmobile stock based Jellybean 4.1.1 or 4.1.2 roms in the future.
But who am I to say whats best..... This is just my personal opinion...... Which usually is not worth a dime. LOL
Sorry, but untill we know more about it, I would not flash T999 firmware onto the T999L.
Its only been out a day and tgey are different model phones with different hardware.
If you decide to try anyway, please post your results
Sent from my SGH-T999 using xda premium
DocHoliday77 said:
Sorry, but untill we know more about it, I would not flash T999 firmware onto the T999L.
Its only been out a day and tgey are different model phones with different hardware.
If you decide to try anyway, please post your results
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I am a newbie. I thought the T999 was the same as the T999L. That would explain why Odin doesnt flash stock T999 onto my device. Can anyone here post a link to the stock SGH-T999L ROM?
Just did a quick check and I dont see that the firmware has been made available for download yet.
If you want stock I would flash one of the stock based custom roms via recovery for now.
Out of curiosity, what is your current baseband version?
Sent from my SGH-T999 using xda premium
DocHoliday77 said:
Just did a quick check and I dont see that the firmware has been made available for download yet.
If you want stock I would flash one of the stock based custom roms via recovery for now.
Out of curiosity, what is your current baseband version?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Baseband version is T999LUVAMB7. Still waiting for stock ROM to be released on samsung-updates or sammobile.
newidforu said:
Baseband version is T999LUVAMB7. Still waiting for stock ROM to be released on samsung-updates or sammobile.
Click to expand...
Click to collapse
I had the same issue with the same phone. Got it 2 weeks ago haha. Did you happen to make a backup first using CWM Recovery? If so, you can just restore that backup and you'll have your camera functionality back. It's pretty annoying switching back and forth from CM10.1 back to stock just to take pictures but Rom manager makes it pretty quick and effortless.
Actually now that I think of it, they prob wont release the original firmware. Seems like the first build is never available, only when an update is released do we get firmware we csn download.
I am working with another member on getting something going for the T999L, but right now we are stuck until a verified safe method of rooting is found. (Dont want to flash a recovery or cf autoroot w/o knowing it wont screw something up)
Itll happen, but we just gotta be patient.
Just reread the op and see that you say you flashed TWRP. So you were able to initially gain root without any problems?
Sent from my SGH-T999 using xda premium
DocHoliday77 said:
Actually now that I think of it, they prob wont release the original firmware. Seems like the first build is never available, only when an update is released do we get firmware we csn download.
I am working with another member on getting something going for the T999L, but right now we are stuck until a verified safe method of rooting is found. (Dont want to flash a recovery or cf autoroot w/o knowing it wont screw something up)
Itll happen, but we just gotta be patient.
Just reread the op and see that you say you flashed TWRP. So you were able to initially gain root without any problems?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I used Odin to flash Clockwork Mod recovery first. I did not like Clockwork Mod's interface and reflashed with TWRP. I had no problems to gain root with either of these methods. I also tried Cyanogenmod stable 10.0.0 and then 10.1 RC2 without any problems. As far as I can tell, all apps work except for the camera. One word of caution though. As you can see from my posts, I am new and dont know what I am doing. I might have just gotten lucky since my device is still unbricked. I had only one "scary" moment during the entire process. I used TWRP to wipe my phone clean and was stuck with no OS install file. ADB sideload did not work since it could not recognize the device at that point. Luckily, I had a micro SD card lying around and was able to put in a new OS install file using my laptop and then TWRP was able to handle it.
tsticge aye
faytx1 said:
I had the same issue with the same phone. Got it 2 weeks ago haha. Did you happen to make a backup first using CWM Recovery? If so, you can just restore that backup and you'll have your camera functionality back. It's pretty annoying switching back and forth from CM10.1 back to stock just to take pictures but Rom manager makes it pretty quick and effortless.
Click to expand...
Click to collapse
Wish I had made a backup! Could you zip up the files contained inside "/system/cameradata/" folder and post a link here? It would help me and anyone else with the same problem restore the camera's functionality. In case you want to try it out, follow the instructions in this link but using the files from your stock backup
http://forum.xda-developers.com/showthread.php?t=2239414
newidforu said:
Wish I had made a backup! Could you zip up the files contained inside "/system/cameradata/" folder and post a link here? It would help me and anyone else with the same problem restore the camera's functionality. In case you want to try it out, follow the instructions in this link but using the files from your stock backup
http://forum.xda-developers.com/showthread.php?t=2239414
Click to expand...
Click to collapse
Here is the cameradata folder from the T999L.
http://d-h.st/Ciy
Good Luck!
How did you get Cyanogenmod installed on the t999l every time i try it aborts with status 7
Mine was failing with this same error. I reverted back to stock, re rooted, then downloaded the flash directly to the phones internal storage. Worked like a champ. I think in my case, there is an issue with the SD card, its kind of old.
Sent from my SGH-T999 using xda app-developers app
Beefstew said:
Mine was failing with this same error. I reverted back to stock, re rooted, then downloaded the flash directly to the phones internal storage. Worked like a champ. I think in my case, there is an issue with the SD card, its kind of old.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
You reverted to stock on the T999L? please exspain how that was done
Re flashed stock ROM using Odin. I believe I got the file from Samsung's website, but I'm not positive of that. I do know its huge, over 1 gig. If you need help with the re flash I know there are already how to's on here about that, so I won't go into it here.
Sent from my SGH-T999 using xda app-developers app
You must be using a T999 as your sig indicates, not a T999L. Am I correct?
Sent from my SGH-T999 using xda premium
Don't I feel like a tool now. Yes Doc, plain old t999 here. Now that I read back through the whole thread here I see that I was being a bit redundant. Now I will return to my closet under the stairs.
Sent from my SGH-T999 using xda app-developers app
No worries! We all do stuff like that from time to time!
Sent from my SGH-T999 using xda premium

[Q] Straight Talk (Tracfone) Sprint Galaxy S3 SCH-S960L flashed wrong modem

I use the Sprint SlimBean ROM and I had no issues with it on my SCH-S960L. I had no issues with my mobile connection except for the fact that it it took some time to connect to mobile data services or even required a restart or Airplane mode toggled. This along with it sometimes did not switch between 3G and LTE when it should. Because of this I attempted to flash a newer Sprint Galaxy S3 modem. This completely disestablished any connection to services. It has 0 bars and cannot make calls, send texts, or use data. I have tried to reflash the ROM but of course, it did not help at all.
Now in the light of hope, I made a backup of the efs and firmware folders before flashing. I'm not sure how I can fix my issue with this but it was suggested to do so before flashing.
My baseband version was S960LWYAMD6. While I could reflash the old modem, (with help) I would prefer a better modem. (if there are any)
Any help is appreciated.
With best regards,
SirBenjamin
Well this just may be your day. Apparently chxnugs just posted the Modem for your particular device HERE. I would update PRL / Profile first just to see if that will help. Also have you tried ##72786# ?
prboy1969 said:
Well this just may be your day. Apparently chxnugs just posted the Modem for your particular device HERE. I would update PRL / Profile first just to see if that will help. Also have you tried ##72786# ?
Click to expand...
Click to collapse
chxnugs said:
i know this is sprint galaxy s3 section, but the straight talk s3 is basically the same phone and there is no section for it.
if you own this particular model, then you would know that its pure hell trying to find ANY files. this is the stock MD6 modem.bin ripped from my phone. ive seen people ask for this modem because they flashed the MD4 modem in hopes of getting their MSL and/or for the benefits of being able to use the 16-digit password. (which reminds me.. i have read of ways to port the 16-digit password from a .dll file in the phone? i have done loads of searching, but the password is NO WHERE to be found) and needed the stock modem. so for anyone that needs it here it is.
hopefully us ST S3 users will eventually gather up all the odin files to completely restore our phones when needed
Click to expand...
Click to collapse
I tried to flash the file chxnugs provided. I used both Mobile Odin and replaced the modem file in another flashable ZIP. Neither of them worked and I still get 0 bars/unknown baseband.
Honestly I have no idea what to do to fix this but it needs to work.
Again I say, all help is appreciated.
ok i extracted a fresh modem.bin straight from my phone. let me know if it works
Oh and just asking.. have you extracted the .bin file from the zip and tried it
Sent from my SCH-S960L using Tapatalk
chxnugs said:
Oh and just asking.. have you extracted the .bin file from the zip and tried it
Sent from my SCH-S960L using Tapatalk
Click to expand...
Click to collapse
chxnugs said:
ok i extracted a fresh modem.bin straight from my phone. let me know if it works
Click to expand...
Click to collapse
I got the same results. I extracted the .bin but renamed it to NON-HLOS.bin since Mobile Odin would not accept it as modem.bin. Am I flashing this wrong?
Sent from my SCH-S960L using Tapatalk
Did you try any of my other suggestions form post #2 ?
im sure your trying to flash it under phone section.. i managed to try to make a flashable CWM version. maybe you can try that and let me know if it works
prboy19648801865 said:
Did you try any of my other suggestions form post #2 ?
Click to expand...
Click to collapse
chxnugs said:
im sure your trying to flash it under phone section.. i managed to try to make a flashable CWM version. maybe you can try that and let me know if it works
Click to expand...
Click to collapse
Proby, I tried to do the other things you suggested. I can't update the PRL/Profile since I'm on a custom ROM. That is unless there is another way. I did not understand what you meant with the number you mentioned. If you wanted me to call that it did nothing.
As for chx, unfortunately it still did not fix it. This quick little modem update is turning into a nightmare. Not only that, but no sound plays, the microphone does not work, and DSP Manager crashes whenever I try to play media.
I really appreciate both of your support though.
Yay! I used Mobile Odin Pro and flashed a file from another thread. It may have been the file or using Mobile Odin Pro since it downloaded the correct driver. I appreciate all of your help, though.
Sent from my SPH-L710 using Tapatalk

[Q] Bootlooping despite flashing via Odin and installing CWM

Guys here is my problem. I tried to upgrade my Samsung N7105 to 4.3 via OTA and it got stucked on bootloop.
I tried to access recovery mode but it fails, only download mode.
What i did is I downloaded the official 4.3 firmware at SamMobile and flashed it with Odin 3.09
Based on Odin it is successful but im still stuck on bootloop and recovery mode cannot still be accessed.
Tried to root it also and installed CWM to recover. I was able to to access CWM
so i restored factory setting, wipe cache and dalvik cache but still the phone bootloops.
Any suggestions on how to resolve my problem?
iamjerbergerber said:
Guys here is my problem. I tried to upgrade my Samsung N7105 to 4.3 via OTA and it got stucked on bootloop.
I tried to access recovery mode but it fails, only download mode.
What i did is I downloaded the official 4.3 firmware at SamMobile and flashed it with Odin 3.09
Based on Odin it is successful but im still stuck on bootloop and recovery mode cannot still be accessed.
Tried to root it also and installed CWM to recover. I was able to to access CWM
so i restored factory setting, wipe cache and dalvik cache but still the phone bootloops.
Any suggestions on how to resolve my problem?
Click to expand...
Click to collapse
just to add, i think i tripped the knox warrant void. its value is now 1 what this means?
Simply flash philz v5.00.5 and it should solve it, here's the link: http://link.tapatalk.com/api/click?...rs.com&subid=c157297d1a1ff043255bfb18530caaa2
Hope it works
With Regards,
Overdub
Sent from my Galaxy Note II using Tapatalk
OverDub said:
Simply flash philz v5.00.5 and it should solve it, here's the link: http://link.tapatalk.com/api/click?...rs.com&subid=c157297d1a1ff043255bfb18530caaa2
Hope it works
With Regards,
Overdub
Sent from my Galaxy Note II using Tapatalk
Click to expand...
Click to collapse
Was able to access custom recovery upon flashing. conducted wipe data / factory reset and wipe dalvik cache but still bootlooping was experienced. Is my phone dead already and needs replacement?
After flashing the philz, try flashing a custom ROM and see if u will unstuck from the bootloop, try cm 10.2, it's very light and mostly bug free
Sent from my GT-N7100 using xda app-developers app
OverDub said:
After flashing the philz, try flashing a custom ROM and see if u will unstuck from the bootloop, try cm 10.2, it's very light and mostly bug free
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Now working cm10.2 but now my next problem is there is no signal. it appeared that imei value is null. how do i repair this? thanks!
By the way after successfully running on cm10.2 I tried to reflash again with stock firmware. bootloop again. i think i will be stuckon using custom roms for now. The only thing I need to address is the no mobile signal problem.
OK so the bootloop problem is done and don't worry there are a lot of amazing custom roms that are based on the stock one and even better features like the note 3 features, as for the imei, please tell me you did an nfs backup if you do, there are a lot of ways you can restore your nfs backup, if you don't have an nfs backup, I don't know what to do.
With Regards,
Overdub
Sent from my GT-N7100 using xda app-developers app
Not very clued up on losing baseband but it happened to me once when I used a different revovery version to restore a back up. Dr Ketan has written a guide on restoring baseband, he will be able to fix it
Sent from my GT-N7105 using XDA Premium 4 mobile app
Please keep us updated and if it is fixed hopefully, please show us what you did.
With Regards,
Overdub
Sent from my GT-N7100 using xda app-developers app
Still not working
OverDub said:
Please keep us updated and if it is fixed hopefully, please show us what you did.
With Regards,
Overdub
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Sorry was on vacation for a long time. I wasn't able to update this thread.
Problem right now is I forgot to back the EFS so when I flashed CM 10.2
There is no baseband and IMEI is null. Tried to flash n7105 modem but still it still doesn't work
Have read that I should flash stock firmware to fix baseband and IMEI but 4.3 firmwares makes my phone go on bootloop.
Should I wait for 4.4 update? I want my phone to make it usable again.
My phone right now is useless and works like an itouch hahaha
Any suggestions???
Need expert advise
iamjerbergerber said:
Sorry was on vacation for a long time. I wasn't able to update this thread.
Problem right now is I forgot to back the EFS so when I flashed CM 10.2
There is no baseband and IMEI is null. Tried to flash n7105 modem but still it still doesn't work
Have read that I should flash stock firmware to fix baseband and IMEI but 4.3 firmwares makes my phone go on bootloop.
Should I wait for 4.4 update? I want my phone to make it usable again.
My phone right now is useless and works like an itouch hahaha
Any suggestions???
Need expert advise
Click to expand...
Click to collapse
You may try Hurricane modem changer and experiment with various modem versions. It's a longshot but it may help. Try finding very old modem version and flash that.
Hurricane Modem Changer is that an application?
Where to get it? Also, will it there be a possibility that when I flash Official 4.4 kitkat (when released) on my n7105.
Bandwidth and IMEI will be restored? I'm leaning towards to come back to touch wiz though many of you guys might say that a custom rom might be better.
For one thing, the problem in my n7105 started when i upgraded to 4.3 via OTA
iamjerbergerber said:
Hurricane Modem Changer is that an application?
Where to get it? Also, will it there be a possibility that when I flash Official 4.4 kitkat (when released) on my n7105.
Bandwidth and IMEI will be restored? I'm leaning towards to come back to touch wiz though many of you guys might say that a custom rom might be better.
For one thing, the problem in my n7105 started when i upgraded to 4.3 via OTA
Click to expand...
Click to collapse
Look HERE. One of the downloads is Hurricane Modem Changer.
mat9v said:
Look HERE. One of the downloads is Hurricane Modem Changer.
Click to expand...
Click to collapse
Thanks will try. Aside from this. Where can I find old modem?
Will hurricane modem changer work if I used ditto note 3 rom?
iamjerbergerber said:
Thanks will try. Aside from this. Where can I find old modem?
Will hurricane modem changer work if I used ditto note 3 rom?
Click to expand...
Click to collapse
Hurricane contains some older modems along with new ones and yes it will work if you used DN3.
mat9v said:
Hurricane contains some older modems along with new ones and yes it will work if you used DN3.
Click to expand...
Click to collapse
Is the hurricane modem changer link you provided will work on n7105? tried to flash it but aroma installer tells its for n7100 international version
iamjerbergerber said:
Is the hurricane modem changer link you provided will work on n7105? tried to flash it but aroma installer tells its for n7100 international version
Click to expand...
Click to collapse
No, it's for N7100 only - the modems are completely different (3G vs LTE).
Please read the original post carefully before flashing, if the HC was not protected you could have lost network functions completely.
mat9v said:
No, it's for N7100 only - the modems are completely different (3G vs LTE).
Please read the original post carefully before flashing, if the HC was not protected you could have lost network functions completely.
Click to expand...
Click to collapse
Im using an n7105 model. Guess this will not work. Any other suggestions?
From what I understand, the quickest solution is to flash stock firmwares however, i'm quite disappointed that
almost all 4.3 firmwares from sam mobile doesn't work in my phone (always bootlooping)
A technician told me that I should wait for the 4.4 kitkat release, since it might work for my phone.
Now my problem is, I need to have the phone operational. so im willing to flash custom roms for the meantime
but the baseband problem is really testing my patience. hehe
iamjerbergerber said:
Im using an n7105 model. Guess this will not work. Any other suggestions?
From what I understand, the quickest solution is to flash stock firmwares however, i'm quite disappointed that
almost all 4.3 firmwares from sam mobile doesn't work in my phone (always bootlooping)
A technician told me that I should wait for the 4.4 kitkat release, since it might work for my phone.
Now my problem is, I need to have the phone operational. so im willing to flash custom roms for the meantime
but the baseband problem is really testing my patience. hehe
Click to expand...
Click to collapse
It's pretty strange really as stock firmwares are a complete set of bootloader/modem/system that should in theory work perfectly well together without any incompatibility problems. Have you ever tried to install one of them without sdcard and/or simcard installed, maybe you have some leftovers from previous system (Android secure directory) that causes bootloops, also did you completely clean internal sdcard prior to flashing, it may create the same problems as external sdcard.
mat9v said:
It's pretty strange really as stock firmwares are a complete set of bootloader/modem/system that should in theory work perfectly well together without any incompatibility problems. Have you ever tried to install one of them without sdcard and/or simcard installed, maybe you have some leftovers from previous system (Android secure directory) that causes bootloops, also did you completely clean internal sdcard prior to flashing, it may create the same problems as external sdcard.
Click to expand...
Click to collapse
im not sure if i cleaned the internal sdcard prior to flashing.
It started with the OTA update that failed then I tried to flash stock firmware via odin
do i have to do a pre-requisite before flashing it again? so you are suggesting to remove the simcard and external sd card prior to flashing?

[Q] Signal drops when on a call with any kitkat rom

I am having a weird issue with my S4 running any Rom past 4.2. When I make a call, the signal indicator changes to the circle with a line through it. The call stays connected, but no data transfer is possible. Any attempt to access the internet results in an error. But the call stays connected just fine. Once I end the call the signal eventually comes back and I can use the phone as normal. If I try to make a call before the signal comes back I get an error (even though I was just on the phone). Rebooting the phone seems to make the signal come back faster.
Any 4.2 rom does not have this issue.
Anyone have any ideas?
What baseband are you running?
Sent from my SGH-M919 using XDA Premium 4 mobile app
kriptik210 said:
what baseband are you running?
Sent from my sgh-m919 using xda premium 4 mobile app
Click to expand...
Click to collapse
m919uvuamdl
timekillerj said:
m919uvuamdl
Click to expand...
Click to collapse
You need to update it
Sent from my SGH-M919 using Tapatalk
Yeah, just found that I need M919UVUFNB4 apparently. Will try that and report back. Thanks.
Here is a good DL link if you have any problems.
http://www.androidfilehost.com/?fid=23329332407579299
Just ODIN from PC twice and you are good
Sent from my SGH-M919 using XDA Premium 4 mobile app
Somehow the new baseband has made things MUCH worse. The phone is completely unusable now. It is EXTREMELY laggy. no sounds from screen touches at all. It didn't even do the t-mobile jingle on boot. When I try to make a phone call, the other phone rings before the S4 leaves the "dialing" screen. Talking doesn't work, no voice gets through in either direction. I would never expect this from a modem flash.
I can confirm on the about screen the new baseband is M919UVUFNB4
I tried wiping the phone, thinking somehow it needed to "start fresh" with the new modem. That did not help. Then I tried reflashing Fenny's 4.4.2 Stock ROM (same rom I was running before). Nothing helps.
What the heck is going on?!?
timekillerj said:
Somehow the new baseband has made things MUCH worse. The phone is completely unusable now. It is EXTREMELY laggy. no sounds from screen touches at all. It didn't even do the t-mobile jingle on boot. When I try to make a phone call, the other phone rings before the S4 leaves the "dialing" screen. Talking doesn't work, no voice gets through in either direction. I would never expect this from a modem flash.
I can confirm on the about screen the new baseband is M919UVUFNB4
I tried wiping the phone, thinking somehow it needed to "start fresh" with the new modem. That did not help. Then I tried reflashing Fenny's 4.4.2 Stock ROM (same rom I was running before). Nothing helps.
What the heck is going on?!?
Click to expand...
Click to collapse
What all did you do?
Sent from my SGH-M919 using XDA Premium 4 mobile app
timekillerj said:
Somehow the new baseband has made things MUCH worse. The phone is completely unusable now. It is EXTREMELY laggy. no sounds from screen touches at all. It didn't even do the t-mobile jingle on boot. When I try to make a phone call, the other phone rings before the S4 leaves the "dialing" screen. Talking doesn't work, no voice gets through in either direction. I would never expect this from a modem flash.
I can confirm on the about screen the new baseband is M919UVUFNB4
I tried wiping the phone, thinking somehow it needed to "start fresh" with the new modem. That did not help. Then I tried reflashing Fenny's 4.4.2 Stock ROM (same rom I was running before). Nothing helps.
What the heck is going on?!?
Click to expand...
Click to collapse
Sounds like you installed the NB4 LTE modem as well. (NON-HLOS) i think is the name. You only need to instal the actual modem as the LTE modem will do exactly what you are experiencing
elesbb said:
Sounds like you installed the NB4 LTE modem as well. (NON-HLOS) i think is the name. You only need to instal the actual modem as the LTE modem will do exactly what you are experiencing
Click to expand...
Click to collapse
You are exactly right. The modem tarball I downloaded had both, so I flashed both (woops!). I just finally got myself sorted out. Had to flash back to factory 4.2, re-root, install TWRP, re-flash 4.4.2, then flash the modem.bin (several times before it took). But! All my problems are resolved.
Thanks for the help guys.
timekillerj said:
You are exactly right. The modem tarball I downloaded had both, so I flashed both (woops!). I just finally got myself sorted out. Had to flash back to factory 4.2, re-root, install TWRP, re-flash 4.4.2, then flash the modem.bin (several times before it took). But! All my problems are resolved.
Thanks for the help guys.
Click to expand...
Click to collapse
If you don't mind can you share which modem ad rom you flash?
How's battery and signal compared to 4.2.2 with MDL modem?
Thanks.
Sent from my SGH-M919 using Tapatalk 2
vlad2277 said:
If you don't mind can you share which modem ad rom you flash?
How's battery and signal compared to 4.2.2 with MDL modem?
Thanks.
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
Flashed the modem previously linked in this thread, and Fenny's 4.4.2 stock rooted rom. Can't really compare battery/signal because I just flashed it, and it's my wife's phone. She got it when I got the S5

Latest Modem and Kernel from COH4 update

Since I didn't see anyone pull the modem and kernel from the last stagefright update in Sept., thought I'd do it for the few of us that still have this old device.
T889UVUCOH4 Modem: http://www.mediafire.com/download/85es0yrteawo879/T889UVUCOH4_Modem_9_28_15.zip
T889UVUCOH4 Kernel: http://www.mediafire.com/download/w6wdyb3fut6t8c6/T889UVUCOH4_Kernel-9_28_15.zip
Was there an OTA for T-Mobile? I'm currently on a AOSP Rom.
Sent from my SM-N910T using Tapatalk
James62370 said:
Was there an OTA for T-Mobile? I'm currently on a AOSP Rom.
Sent from my SM-N910T using Tapatalk
Click to expand...
Click to collapse
Yeah, but you need to be on a stock ROM to get the OTA, or you can download the whole ROM from sammobile.com. It's a security fix for stagefright. I just wanted to try the new modem and see if it made any difference. I won't be able to test the kernel, since I switch back and forth between a 4.4.4 TW ROM and 5.1 CM ROM.
Appreciate the info, have you notice better signal with the new radio?
James62370 said:
Appreciate the info, have you notice better signal with the new radio?
Click to expand...
Click to collapse
Maybe a little better signal (?), but basically the same. Haven't been on it real long, I'll have to see if the standby improves after I've been on it a while.
kozmo21 said:
since I switch back and forth between a 4.4.4 TW ROM and 5.1 CM ROM.
Click to expand...
Click to collapse
Are you dual booting? Is it possible?
Warning, don't flash this modem. I did and it killed my baseband. I tried flashing 3 other roms which wouldn't even finish booting to my phone before I finally realized it and flashed my original modem back and all was working again.
xamindar said:
Warning, don't flash this modem. I did and it killed my baseband. I tried flashing 3 other roms which wouldn't even finish booting to my phone before I finally realized it and flashed my original modem back and all was working again.
Click to expand...
Click to collapse
yikes.. ok thanks. I was going to do this today. I'll wait
xamindar said:
Warning, don't flash this modem. I did and it killed my baseband. I tried flashing 3 other roms which wouldn't even finish booting to my phone before I finally realized it and flashed my original modem back and all was working again.
Click to expand...
Click to collapse
Working fine on mine. Did you maybe get a bad download? You could maybe try downloading again?
Which modem did you go back to?
Flashed fine and so far no issues. Previous user might have a bad download or different device.
Flashed via TWRP today.. I had no service after reboot but did another restart and it was working.
Don't know if its any better than the previous modem version but will give it a try. thx
Working great here no issues
With old bootloader md1 4.1.2 with ROMofTHRONESv1.0
Sent from my SGH-T889 using XDA Premium 4 mobile app
My wife's note 2 got this OTA and now the phone won't even turn on....:crying:
tsiah said:
My wife's note 2 got this OTA and now the phone won't even turn on....:crying:
Click to expand...
Click to collapse
You caused the problem when you altered the stock ROM. From your thread about it here (http://forum.xda-developers.com/note-2-tmobile/help/recent-tmo-ota-update-bricked-wifes-t3245890), you said "Had her note 2 with stock 4.3, Rooted it last year to titanium backup and uninstall a couple bloatware apps. " This is what caused your problem. It was no longer a stock ROM when you remove apps. I know it doesn't seem like it would be a big deal, but it is, and you found out unfortunately
kozmo21 said:
You caused the problem when you altered the stock ROM. From your thread about it here (http://forum.xda-developers.com/note-2-tmobile/help/recent-tmo-ota-update-bricked-wifes-t3245890), you said "Had her note 2 with stock 4.3, Rooted it last year to titanium backup and uninstall a couple bloatware apps. " This is what caused your problem. It was no longer a stock ROM when you remove apps. I know it doesn't seem like it would be a big deal, but it is, and you found out unfortunately
Click to expand...
Click to collapse
That's kinda what I was thinking had happened.
I suppose I shouldn't blame the OTA. I just noticed someone else had issues with it too.
so to the people that actually flashed this new modem and kernel, is it working better than previous iterations?
question:
I flashed the C0H4 modem on note 2 (nameless lollipop rom) seems ok...
DO I have to also flash the Kernel ? is there an advantage to flashing the kernel? thx
Hello! Thanks for this! I flashed this over TWRP 2.8.7.1, and wiping my dalvik cache. My phone's originally T889UVALK8 (16gb SGH-T889 t0ltetmo) and the signal drops but after flashing this (C0H4) the signal greatly improved, although I'm having some signal instability since I'm supposed to have full bars because my house is just in line of sight, 2km from the tower. Also I think I'll do a clean install of another custom ROM since I'm using the CM12.1 t0lte nightly, and maybe this affects my signal (I know I'm stupid for doing it but it works).
Welp. After rebooting, the phone lost signal again. I have to do a wipe of dalvik cache to restore my signal. I guess I'll try using another ROM instead.
Upodate: I may be experiencing hardware issues. I have yet to flash back to stock since my phone's signal drops. I can't flash the firmware because it says 'zip signature verification failed.'
kozmo21 said:
Working fine on mine.
Click to expand...
Click to collapse
BUT, "yours" seems to be a completely different phone! It says Galaxy Note 4, SM-N910C...
What's up with that?!
AuralArch said:
BUT, "yours" seems to be a completely different phone! It says Galaxy Note 4, SM-N910C...
What's up with that?!
Click to expand...
Click to collapse
It's just the ROM I flashed that makes it say that. That ROM is in my signature... DN4

Categories

Resources