Develop Bugs

[MOD][03 Jan] [Discontinued] Less Notifications | JB ROMs based on 3.14.401.31

Power Saver & Beats Notification Disabler
Short info
Power Saver
This MOD little change the HTCPowerManager behaviour.
Now we can see Power Saver notification not all time.
I leave it visible only when power saver enabled or battery charge less then 15%.
Also -
fixed brightness saving mode
added option to allow manual remove notification. In enabled state you can manual remove notification from notifications list, or by "Clear" button.
added option - turn off screen animation
added option - reduce screen off timeout
added option - turn off bluetooth
added option - turn off GPS
added option - turn off Wi-Fi (disable only if enabled but not connected)
added option - disable sleep mode for data and wi-fi connection
Beats Notification Disabler
This MOD disable beats state notification in general.
Don't know for what this notification, only fills the list of notifications.
Click to expand...
Click to collapse
Caution
This mods changes the framework.
If You try flash this mods even on supported base ROM with framework, what have differences with moded, it can boot loop your device. If You don't know how to solve boot loop - make NANd backup via CWM mandatory before flash mods.
Power Saver
Ver 9.1 fix
Fixed "disable sleep mode for data and wi-fi connection"
Ver 9.0 final
Moved to base 3.14.401.31
Ver 8.0 (reworked)
Complete reworked.
Compatible with MusicBox 4
Constantly battery percentage
Correct behaviour in all power modes
Ver 7.0
Ported to base 3.14.401.27 release key.
Completed low level battery behaviour.
Now working as should.
Ver 6.0
Ported to base 3.14.401.24 release key.
Ver 5.0
fixed brightness saving mode
added option - turn off screen animation
added option - reduce screen off timeout
added option - turn off bluetooth
added option - turn off GPS
added option - turn off Wi-Fi (disable only if enabled but not connected)
added option - disable sleep mode for data and wi-fi connection
Ver 4.0
Ported to base 3.14.401.22 release key.
Ver 3.0
Ported to base 3.14.401.20 release key.
Removed all debug code.
Ver 2.1
Manual remove notification completed.
Ver 2.0
Fixed remove notification delay.
Fixed Clear button issue.
Added property to allow manual remove notification, not finished yet (read "known problems" section).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Known problems
Fixed
Click to expand...
Click to collapse
Beats Notification Disabler
Ver 5.0
Compatible with MusicBox 4(this mod must be flashed after MusicBox 4), PowerSaver
Base 3.14.401.31
Ver 4.0
Ported to base 3.14.401.27 release key.
Ver 3.0
Ported to base 3.14.401.24 release key.
Ver 2.0
Ported to base 3.14.401.22 release key.
Ver 1.0
Available for base 3.14.401.20 only.
Known problems
Not yet.
Click to expand...
Click to collapse
Download Section
Power Saver ver. 9.1
DOWNLOAD
Click to expand...
Click to collapse
Beats Notification Disabler ver. 5.0
DOWNLOAD
Click to expand...
Click to collapse
Credits:
shnizlon for his JB ROMs.
Sources "Power Saver" ver 9.1 - for devs only
DOWNLOAD
Click to expand...
Click to collapse

lyapota said:
Power Saver
Short info
Known problems
Credits:
shnizlon for his JB ROMs.
Click to expand...
Click to collapse
Thanks for this mate!
Sent from my RENOVATED One X..

Thanks a lot man, greatly appreciated!

Work fine, tks
Enviado desde mi HTC One X usando Tapatalk 2

Excellent work as always. Most people probably hadn't been aware but with this persistent notification showing all the time we were not getting the full 'rich ntifications' showing (emails with extended content, reply and forward buttons, rich SMS notifications, etc). With the notification disabled you now see all notifications as they should be seen in JB. Bit of a fail from HTC really! Thanks again.

Thank you very much lyapota! Awesome mod, works great!

Nice mod. Works fine on ARHD 13.
OT. How did I chnge operator to life
Sent from HOX with ARHD 13

Dunc001 said:
Excellent work as always. Most people probably hadn't been aware but with this persistent notification showing all the time we were not getting the full 'rich ntifications' showing (emails with extended content, reply and forward buttons, rich SMS notifications, etc). With the notification disabled you now see all notifications as they should be seen in JB. Bit of a fail from HTC really! Thanks again.
Click to expand...
Click to collapse
What are "rich SMS notifications" exactly? Email notifications changed after applying the mod, but SMS notifications stayed the same. Thanks.

Dunc001 said:
Excellent work as always. Most people probably hadn't been aware but with this persistent notification showing all the time we were not getting the full 'rich ntifications' showing (emails with extended content, reply and forward buttons, rich SMS notifications, etc). With the notification disabled you now see all notifications as they should be seen in JB. Bit of a fail from HTC really! Thanks again.
Click to expand...
Click to collapse
lol, it was a surprise for me too. Just wanted to remove the useless notification.

Use 2 fingers to pinch out (zoom out) side ways on a notification to get the enhanced notification, if the app supports it. For example in a missed call notification, you get the call back option. Zoom in to get the notification back to normal.

omar302 said:
Use 2 fingers to pinch out (zoom out) side ways on a notification to get the enhanced notification, if the app supports it. For example in a missed call notification, you get the call back option. Zoom in to get the notification back to normal.
Click to expand...
Click to collapse
Pretty sure it's taking two fingers, and then sliding down from a notification to see more details and sliding up to revert the notification to normal.

can you change battery level from less than 16 to less than 15 % ? so it is consistent with original HTC behavior (battery at 15 does not trigger power saver yet, 14 percent does it)

OniV2 said:
Pretty sure it's taking two fingers, and then sliding down from a notification to see more details and sliding up to revert the notification to normal.
Click to expand...
Click to collapse
That's what it should be in AOSP JB. HTC like to change things.
Sent from my HTC One X using Tapatalk 2

Daekin said:
can you change battery level from less than 16 to less than 15 % ? so it is consistent with original HTC behavior (battery at 15 does not trigger power saver yet, 14 percent does it)
Click to expand...
Click to collapse
Yep, my mistake in description. I mean less then 15% (if-lt 0xf) as original HTC behavior. OP corrected.

I know this is probably placebo, but has anyone else experienced significantly better battery life after switching off power saver and not having it running in the notification area?

EDIT: Correction posted HERE

Thanks for this wonderfull mod :good:
If anyone wants it i have created a blue version, and as long as lyapota is okay with it i can share it
@lyapota if you don`t want me to share it let me know and i will remove the file

patensas said:
Thanks for this wonderfull mod :good:
If anyone wants it i have created a blue version, and as long as lyapota is okay with it i can share it
@lyapota if you don`t want me to share it let me know and i will remove the file
Click to expand...
Click to collapse
No problem, share it.

need a bit work thoo... when its (hidden) the x clear button still shows when your termitad the power app the x button dissapears...this patch works like if you delete the app completely i cant explain it right..
if is possible i wanna hide the notification completely! but the x clear button not shows..maybe i ask much so nevermind im gonna love this notify in the end...

Does this mod work with 3.14.401.6?

[APK][1.6.3] System Monitor Small App - Improvement + Bugfix

System Monitor Small App
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi All
After having Fast App Switcher Small App, I decided to build another useful Small App for us, it's called System Monitor Small App.
The Main purpose is to allow user to monitor their phone live while still playing game or doing some other thing (i.e. Monitoring the speed of the Download).
Features you'll get:
1. CPU Monitoring, CPU & GPU Speed Monitoring, Temperature Monitoring, RAM Monitoring, Storage Monitoring, and Network Speed Monitoring
2. Slim Design to keep Small App Minimalistic
3. Startup at Boot and Accidental Exit Prevention
4. Horizontal and Vertical Orientation Option
5. Adjustable Background Color of Each Monitoring Item
6. Additional Top and Bottom Status Info displayed on Minimized View
7. Adjustable Update Rate
8. Sortable Monitoring Item
9. Long Click to view Data Source of the Monitored Item
Screenshot:
Changelog
Head to Play Store if interested

Very nice...
I was first who downloaded it from play store and I gave you 5 star for this...
Great app...
Tnx mate...
Sent from my D6503 using Tapatalk

Changelog:
1.0.1 (3-7-14)
Initial Release
1.1.0 (4-7-14)
Added CPU Speed Information
Added Minimized View Top and Bottom Label for Quick Info even when minimized
1.2.1 (7-7-14)
Temperature Monitoring (Battery + CPU Temp)
Bigger Text on Minimized Mode
More Flexible State Monitoring to sip less battery
Other Minor Bugfix
1.3.0 (8-7-14)
Added Sorting Option so Items can be sorted manually by you!
Added Indonesian Language
Rotated Progress Bar on Horizontal Mode
Tweaked Refresh Method, More battery friendly.
1.3.1 (14-7-14):
Added Long Click Per Item to show Dialog containing Text Source (to help Developer)
Tweaked Update Algorithm so should be smoother.
Bugfix when changing setting
Concurrent Bugfix
1.3.2 (17-7-14):
Added Byte Unit to Network Monitor
1.3.5 (22-7-14):
Added Storage Monitoring + USB OTG detection so it will be added automatically.
1.3.5 (23/7/14):
Storage Stat Bugfix for Older device.
1.3.7 (24/7/14):
Added Compact Mode So the List doesn't take as much space as it was
1.3.8 (1/8/14):
Fixed Monitoring Item Sorting bug
Tweaked Compact Mode Text Size: Easier to read the Text while on Compact Mode
Added Network Maximum Graph Value & Temp Maximum Graph Value
Added READ_EXTERNAL_STORAGE permission to overcome pre-4.4 Android issue when reading storage size. No Data will be read.
1.4.0 (5/8/14):
Added GPU Monitoring Item: Thanks to DoomLord on XDA for his permission!
More Dynamic Refresh Method to conserve battery even further
Added Smooth Animation on Stat Percentage Change.
NOTE: Some Non-Snapdragon based device will not have the GPU speed monitor. The Stat will stay at 0.0 Mhz.
1.4.1 (22/8/14):
Adjusted default Animation Time
Fixed on Storage Stat Exception
Cleaned Code to achieve better memory consumption
1.4.2 (4/9/14):
Length/Height of App Window is stored individually depending of the orientation of the screen. No more resize after rotating the screen.
Option to enable App Launch from Android Launcher (again)
1.4.3 (17/9/14):
Minor Performance Improvement
Now App size can be stored correctly
Added new Background Style
1.4.4 (17/9/14):
Even Slimmer Compact Mode & Better Layout
Added Spanish Translation
1.5.0 (28/4/15):
Material Design Update on Setting Page
Fixed Issue with Net Speed displaying NaN speed
Added Italian Language
New Line Graph View option
No More Ads! Just donate if you like
1.6.0
Ready for Android M
Transparent Minimized View Background for Small App
Added Shortcut to make it easy for you to give review.
New Small App Icon to match Sony iconography
1.6.1:
SD810 devices can now monitor their CPU Temperature. Thanks to SirRobin78 for testing & Flar2 for guide (Dev of DevCheck app https://play.google.com/store/apps/details?id=flar2.devcheck&hl=en)
1.6.2:
Fix: GPU Speed for Latest Qualcomm Chip is readable
Fix: in Graph mode, the long click event is doable just like in Progress Bar mode
Tweak: Minor Setting UI tweak
New Chinese Translation (thanks CampingZ)
1.6.3:
Fix: Synchronization Issue Fixed when the UI is updated.

Wow!!
Another masterpiece...

1.1.0 is uploading in Play Store should be available in 1-2 hours ahead. Added Minimized View Automatic Label so you don't need to have it expanded all the time + CPU Speed capability.

hansip87 said:
Thank you Btw, if anybody knows how to measure CPU Speed without the need of root, I'd like to have some help. Have searched through stackoverflow but none that i found..
Click to expand...
Click to collapse
In my device, when it is minimise, its doesn't show the value like your screenshot.
And could you add battery and cpu temperature?
Thank for great app:good:

Oohhlala said:
In my device, when it is minimise, its doesn't show the value like your screenshot.
And could you add battery and cpu temperature?
Thank for great app:good:
Click to expand...
Click to collapse
Yes you can, go to setting -> background and icon -> then show info in minimized view.
Temperature one, i actually was going to publish 1.2.0 for that, unfortunately some ANR happened so i need to postpone til Monday. Stay tuned
Sent from my C6802 using XDA Free mobile app

1.2.1 is uploaded with updated UI and temperature monitoring should be updated soon on your handset

HTC ONE does not support. Which phones support the application?

Whoahh... I always wanted this small app.. Grt work mate..
Sent from my C6603 using XDA Premium 4 mobile app

Nice and great job:fingers-crossed:

I can not download from GooglePlay
Please upload apk.
Thank you very much.

+1 for battery charge/discharge status!

Please upload "System Monitor Small App".

... and you have made the news ... Congrats!!

serajr said:
... and you have made the news ... Congrats!!
Click to expand...
Click to collapse
Thank you all Btw, 1.3.0 has been uploaded For those who cannot get one, please check the OP.

Excellent job!!! I always wanted to check some system resources while running some apps, and this small app is exactly what I needed for that. Working great on the Z Ultra, firmware 14.4.A.0.108. Thanks!!

1.3.2 is up minor changes to the network monitor.. Should be arriving soon from Play Store
Sent from my C6802 using XDA Free mobile app

1.3.5 is up, Storage Stat has been added so you can monitor the free space of your SD or even USB OTG.
Sent from my C6802 using XDA Free mobile app

Amazing job really ! I love it.
Making a widget out of it would also be great !!
D5503 UB jfxperias' Kitslim_AMG

Le Tv 1s [Stock ROM] X507 Indian

5.5.012S [Stock ROM] X507 Indian
Release Date：2016-03-28
Package：S1_x500-OS-OP-DHXOSOP5501203231S-5.5.012S (.zip)
Size: 1.1GB
http://g3.letv.cn/194/1/65/letv-hdtv/0/upload/tmp/20160323110607321/S1_x500-OS-OP-DHXOSOP5501203231S-5.5.012S.zip?b=123456&platid=5&splatid=500
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
eUI 5.5.012S Change Log
India Ecosystem
Added: Levidi application
Added: LeView application
Added: LeSo service
Camera
Optimized the setting of display modes
Optimized the image effect for a more natural color temperature
Optimized the setting of the maximum zoom ratio parameter
Optimized the QR code recognition for a higher recognition rate
Optimized the overall photography performance, fixed known bugs and added the facial beautification function
Settings
Optimization – Battery – Added the smart power-saving function for apps to manage the running of background apps effectively
Optimization – Battery – Added various battery assistant functions
Fingerprint
Fixed the issue with a minimum probability where fingerprinting didn't work after restart
System
Optimization – Added the auto-launch management for apps to prevent unwanted apps from launching automatically
Optimization – Reduced power consumption without compromising user experience by optimizing screen brightness and display effect
Optimization – Improved the stability and performance of pushing messages under different network conditions
Desktop
Added the function of automatically arranging icons by pressing and holding an empty area on the desktop
SMS
Added the "Pin to top" function in editing mode after pressing and holding the screen
Added the function of setting the "Do Not Disturb" service for SMS messages against specific numbers
Optimized the visual design of the message creation and the message session pages
Fixed the issue where deleted contacts still displayed when viewing messages
Fixed the issue where the system stopped running when adding images to new messages
Fixed the issue where tapping advanced settings in the message settings caused the system to stop running
Contacts & Dialing & Phone call
Added the new dialing interface that supports switching to the 26-key quick search
Added the function of displaying "Recently added" contact tags during search
Added the function of automatically adding contacts' birthdays to calendar events
Added the function of ignoring incoming calls
Added the function of displaying incoming calls by number in Notification center
Multitask
Added the screen pinning function. After enabling this function in the settings,
you can pin any task in the multitask by pressing and holding the task to improve its security under specific scenarios
Optimization – Optimized the instant clearing button for multitask to decrease the rate of disoperations
Network settings
Added the function of Wi-Fi tethering by scanning the QR code
Themes
Added the function of downloading online themes
Calendar
Added the function of quickly adding a summary for meeting events and sending the summary by email
Added the support for displaying week numbers in the monthly view (you need to enable it in the settings)
Added the support for making quick calls to friends and sending timed SMS messages on the birthday page
Music
Added the brand new operation interface
Added the night mode for the playback interface
Added the function of switching songs by sliding album images on the playback interface
Added the function of playing/pausing songs by tapping album images on the playback interface
Compass
Added the Compass app
My Le
Optimized the "My Le" interface with a brand-new revision
Clock
Optimized the clock ringing interface with a new revision
Notes
Supported adding images during note creating and editing
Added the function of moving notes in batch
INFO:
http://forum.le.com/in/index.php?threads/le1s-offline-update-guideline.1968/

TOP new features in eUI 5.5.012S Build
1.Customize your Menu, Home and Back Button for different useful shortcuts.
You can customize your soft touch buttons for different functions like Shortcut for Flash light, Screen off, Camera shortcut etc
a) Settings > Accessibility > Select Menu, Home or Back option
Now Select which feature you want to set for each Soft buttons.
2.Online Themes
This update brings nine different and beautiful themes.
a) Settings > Wallpapers and themes > Online themes
Now you can download your favourite themes.
3. Setup Do not Disturb feature.
a)Settings > Do Not Disturb> Turn ON
4. Setup QWERTY keyboard feature on Dialpad.
This feature allow you to Search your Contacts without entering into Contacts App.
a)Open Phone App > Press and Hold Star (*) Key
5. Know your WiFi password by QR Code.
a) Settings > WiFi > Select your Network
your unique QR code will popup
b) Scan it and know your or your buddy's password.
6. Pin your Screen.
Now you can pin (lock) your current screen so anyone can't access the your system other than current screen.
a) Settings > Password Security > Scroll down to bottom
b) Select Screen Pinning > Turn ON
7. Disable/Enable LeView.
LeView is a new feature which provide streaming contents in one screen.
a) Press and Hold Menu button
b) Swipe left to the LeView
c) Tap on the EYE icon
Apart from these features, the New Compass app,LeVidi streaming app has been added.
The Music app has been redesign, Remote control app now supports more brands,
Camera app has couple of new features and camera quality improves a lot.
Calendar app now shows your friends birthdays, Battery backup also improves...
original link:
http://forum.le.com/in/index.php?threads/top-new-features-in-eui-5-5-012s-build.8538/

nice keep up the good work will release my rom soon here on xda

will these features be out through OTA as well and after update device will be on this build?
If so, then no need to install it right?

kkrraazzyy
nice keep up the good work
Click to expand...
Click to collapse
Thank you
rajneeshk
will these features be out through OTA as well and after update device will be on this build?
Click to expand...
Click to collapse
Yes

rajneeshk said:
will these features be out through OTA as well and after update device will be on this build?
If so, then no need to install it right?
Click to expand...
Click to collapse
Yes OTA is out and its 216.9 MB only
a sharma
sharing is power

Is heating issue also resolved?

rajneeshk said:
Is heating issue also resolved?
Click to expand...
Click to collapse
brother upto some extent

TOP new features in eUI 5.5.012S Build
Update

laikexpert said:
TOP new features in eUI 5.5.012S Build
Update
Click to expand...
Click to collapse
Thanks all your hard work and efforts to maintain the forum. Do you have any update on Marshmallow timelines for Le 1S?

rajneeshk
Do you have any update on Marshmallow timelines for Le 1S?
Click to expand...
Click to collapse
August 2016

laikexpert said:
TOP new features in eUI 5.5.012S Build
Update
Click to expand...
Click to collapse
If I flash this through twrp will it be replaced with stock recovery?

Kanth's said:
If I flash this through twrp will it be replaced with stock recovery?
Click to expand...
Click to collapse
I do not understand!
What you want to flash?
-------------------------------------------------------------------------
If you think to flash [Stock ROM] X507 Indian on your phone
in this situation-Yes
twrp will be replaced with stock recovery

Kanth's said:
If I flash this through twrp will it be replaced with stock recovery?
Click to expand...
Click to collapse
Seems you are asking, if this will replace your custom recovery to Stock one.
No it would not replace your recovery to Stock, however if it prompts you to disable flashing of stock recovery
you need to select yes, so the Rom doesn't force replace your custom recovery.

Thnx

i am at 17s but accidently there is some problem inthis problem so i want stock rom 5.5
can i flash it. pleasae help me

Requesting Stock Backup taken from custom recovery
Please tell me a link or upload backup of Letv Le 1s model number X507 ASAP. I'm unable to install VCOM driver so please help me.

If any one have le 1s related problem and solution or any one want to try new rom or kernal asap then all of u are welcome in our group on telegram so plz join with us
Requriemt
1. Download telegram from play store
2. Just click below link
https://telegram.me/LeSuperGroup
Thanks all of u

How i install this rom in leeco le 1s x509

Can I install it through twrp recovery...?

[EXPLANATION][CPU GOVERNOR] Poison CPU governor [VENOM-ONLY]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note :
This thread is not the kernel thread. This thread is about the Poison governor in my venom kernel​-- And btw happy diwali to my good friends and users
Intro :
--->Poison is a governor made by me specifically for this device (A7000-a or aio_row)
--->Poison is based on ThunderX governor
--->Poison has maximum optimisation for this device
--->Poison has amazing performance on this device
--->Poison provides amazing battery backup (based on ThunderX)
--->Poison has many additional features
Features :
--->Made for A7000 specifically in mind
--->Most optimised governor for A7000
--->Has custom tuneables for various operations
--->Has support for dynamic frequency scaling modes
--->Has support for dynamic frequency scaling mode engine
--->Has sysfs tuneables linked to it for easier accessibility
What is a "Tuneable"/"Tunable" ?
--->A tuneable/tunable is any variable/value which controls the behaviour of certain things. What a tuneable does is coded by the maker of the tuneable.
How to change a "Tuneable"/"Tunable" ?
--->It's really easy! Install a kernel-editing app like "Kernel adiutor" from play store and you will have all options in it...
How to change a "Tuneable"/"Tunable" in poison governor?
1) Read above question. Below instructions are for "kernel adiutor".
2) Open the app.
3) Go to "CPU" section (in the sidebar menu or whatever you call that thing).
4) Choose "Poison" governor from the list of CPU governors. Ignore if already set.
5) Tap on "CPU Governor tunables".
6) You will now have a list of available tuneables of my governor.
7) Edit them to your preference.
NOTE : DO NOT TOUCH THE BELOW LISTED TUNEABLES UNLESS YOU KNOW WHAT YOU'RE DOING !
Which "Tuneables"/"Tunables" should be left untouched in poison governor (if you are new) ?
1) debug_mask
2) down_rate_us
3) max_cpu_load
4) min_cpu_load
5) ramp_down_step
6) ramp_up_step
7) sample_rate_jiffies <-- This one even I don't dare editing
8) up_rate_us
Tuneables Added by me :
--->Tuneable for controlling haptic feedback on dt2w
--->Tuneable for controlling Wifi power management modes
--->Tuneable for controlling frequency mode
--->Tuneables for fine-tuning the frequency mode behaviour
--->Tuneable for enabling/disabling dt2w input from capacitive buttons at the bottom
--->Tuneable for enabling/disabling pocket mode (accidental wakeup prevention in pocket)
--->Tuneable for controlling which area of the screen triggers dt2w (x,y co-ordinates)
--->Tuneables for many more things also. A total of 21 custom tuneables! Below they are explained.
Tuneables (only necessary ones) working + explanation :
1) MODE :
Function : This tuneable is for dynamic frequency handling.
Values + what does what :
---Mode 1 (Optimized/Default mode)---
The default mode. Best for normal users who only browse and use social apps etc... It has good screen-on performance and usually stays around 1.1Ghz CPU freq. Will move higher depending on load.
---Mode 0 (low mode) (battery-friendly)---
Makes available to the governor only the values less than "mode_low_freq" (936MHz by default) to keep power consumption low while also allowing considerable background work to occur. When screen is off, it will stay at 468Mhz to save power if no wakelock is requested.
---Mode 2 (high mode) (performance-based)---
The opposite of mode 0. This mode makes Makes available to the governor only the values above "mode_high_freq" (1287MHz by default). Recommended for gamers and heavy multitaskers.
NOTE : Slightly more battery use.
---Mode 3 (min-max mode) ("extreme" behaviour)---
Remains only on 468Mhz and 1495Mhz values, or the min and max frequencies set by user.
---Mode 4 (mid mode) ("ready" behaviour)---
Fixes the CPU frequencies to the value of tuneable "mode_mid_freq" (1170MHz by default)
2) MODE_LOW_FREQ :
Function : This sets the limit to which frequencies can go in Mode 0 (battery-friendly)
3) MODE_HIGH_FREQ :
Function : This sets the limit to which frequencies can drop in Mode 2 (performance-based)
4) MODE_MID_FREQ :
Function : This sets the fixed frequency in Mode 4 (ready behaviour)
5) SLEEP_IDEAL_FREQ :
Function : This is the frequency which will be usually used when phone is in sleep mode.
6) SLEEP_WAKEUP_FREQ :
Function : This is the frequency which will be bounced when a wakelock/wake command is requested.
7) AWAKE_IDEAL_FREQ :
Function : This is the frequency which will be usually used when the phone is active
8) VIB :
Function : If dt2w is enabled, you will feel a vibration on dt2w. This tuneable changes the extent of that vibration.
Value : The value is in milliseconds, so 1000 means phone will vibration for 1 second on dt2w.
9) DT2W_ON_BUTTONS :
Function : If dt2w is enabled, this will enable/disable dt2w on the hardware capacitive keys.
Value : The value is a bool (only 0 and 1). 0 means dt2w from buttons is disabled. 1 means opposite.
10) WIFICUSTPOWERMODE :
Function : It controls that behaviour of wifi networks.
Value : It can take three values. "2" means full speed wifi, may use more battery. "1" means more battery, on cost of speed. "0" is a value even I don't understand. Default value is "2".
11) X_LEFT :
Function : Dt2w will only trigger from the part of touchscreen on right side of this co-ordinate.
Value : Default is 0, can be set upto 720, or X_RIGHT (whichever comes first)
12) X_RIGHT :
Function : Dt2w will only trigger from the part of touchscreen on left side of this co-ordinate.
Value : Default is 720, can be set upto 0, or X_LEFT (whichever comes first)
13) Y_UP :
Function : Dt2w will only trigger from the part of touchscreen below this co-ordinate.
Value : Default is 0, can be set upto 1280, or Y_DOWN (whichever comes first)
14) Y_DOWN :
Function : Dt2w will only trigger from the part of touchscreen above this co-ordinate.
Value : Default is 1280, can be set upto 0, or Y_UP (whichever comes first)
NOTE : Using the combined co-ordinates of X_LEFT, X_RIGHT, Y_UP, Y_DOWN (which makes a square), you can define the part of touchscreen which triggers dt2w. Also note that the default values (0,720,0,1280) make the whole touchscreen, so by default whole touchscreen can react to dt2w.
15) REVERT_DT2W_AREA_BOUNDED_BY_XY :
Function : This tuneable gives its function from it's name. This tuneable reverses the area for dt2w bounded by the co-ordinates.
Values : This is a bool (only 0 and 1). On "0" value, it means off. So dt2w will work only from the area bounded by x_left,x_right,y_up,y_down. On "1" value, this tuneable will activate and dt2w will work only from the area NOT bounded by x_left,x_right,y_up,y_down (on touchscreen only). This tuneable affects only touchscreen dt2w. Note that this value doesn't affect the "dt2w_on_buttons" tuneable. Default value is 0, means dt2w will only function in the area bounded by the co-ordinates.
16) POCKET_MOD_ENABLED :
Function : This tuneable enables/disables pocket mod (accidental proximity wakeup). This should be disabled in ROMs with proximity wakeup support like RR by @Rohan Taneja and all vibe roms. This should be kept enabled on all other ROMs.
Values : This is a bool (only 0 and 1). On "0" value, proximity sensor check is disabled from kernel. ROM proximity check will still work. On "1" value, proximity check is enabled and screen won't wake up if proximity sensor is covered. This might conflict with proximity checks of ROMs... (advanced : ...but the workqueue should handle everything, thus eliminating conflicts, but using double power for same thing on every wakeup call)
17) AC_CHARGE_LEVEL :
Function : Sets the maximum limit of current level while charging with ac.
Value : Can be from 1500000 to 2500000
18) USB_CHARGE_LEVEL :
Function : Sets the maximum limit of current level while charging with usb.
Value : Can be from 900000 to 1500000 (maybe. I don't remember)​
I hope this guide to use the POISON governor properly was of great help to you.
If you have any questions regarding ONLY poison (NOT venom) then post on this thread. Non-sense/Noob questions will be ignored.
If you like my work, please consider donating to me.
If you want to donate, please contact me via private message on xda, or mail me ([email protected]) and simply type "I want to donate to you" or something like this.
XDA:DevDB Information
Poison governor, Tool/Utility for the Lenovo A7000
Contributors
tanish2k09, Those who made linux, ThunderX CPU gov devs, those who made all the stuff my tuneables point to, Rohan Taneja for giving support, HDHR for starting me off in development
Source Code: https://github.com/tanish2k09/Venom-Poison_cpu_governor_aio_row/
Version Information
Status: Stable
Current Stable Version: 2.0.
Stable Release Date: 2017-10-19
Created 2017-10-19
Last Updated 2017-11-13

Reserved
A new poll is now up on this thread!
Vote whether this guide was helpful to you or not!
Everything was typed by me, properly sized, colored and placed by me. It took me a lot of time.
What did I get for it? Nothing at all! Absolutely out of good will. Enjoy.
Don't forget to donate if you think my work is worth it!

Reserved

AWESOME EXPLANATION BRO...

Guys I just updated the tuneables list. Sorry it had some glitch where 11 was shown multiple times.
Now I think everything is perfect. Please vote in the poll from browser. Only 3 users have voted till now.

Really amazing bro

aswinp222 said:
Really amazing bro
Click to expand...
Click to collapse
Sir I will sent private message to you

aswinp222 said:
Really amazing bro
Click to expand...
Click to collapse
So you still have a7k? You use poison?
How about a vote in the poll?
And where's my thanks?

Really good explanation bro ! :good:

I'll update the thread with 4 more tuneables which are in my last build (27oct)

First post updated with 8 more tuneables!!!:highfive:
Latest high performance version of venom coming up on Nov 12th (Sunday). Yup! That's less than 20 hours!
Be patient and tomorrow, just download the venom kernel after release... Download as if it will be your last breath if you don't download it fast lol
Stay tuned!

Before I go for this year from xda, here's my last piece of contribution.
Poison CPU governor is now open source!
Means it can be added to even other kernels!
Here's the source code of my governor :
https://github.com/tanish2k09/Venom-Poison_cpu_governor_aio_row/

Ac_charge_level
Where do I set the charge level at?

just wanna know if i can turn off d2tw on screen and enable dt2w on the hardware capacitive keys only? plus i want to disable all the off screen swipe gestures.

AnOob_701 said:
just wanna know if i can turn off d2tw on screen and enable dt2w on the hardware capacitive keys only? plus i want to disable all the off screen swipe gestures.
Click to expand...
Click to collapse
Yes. And yes.
With venom, you are in power. You decide how you use your phone, and I make it possible. Try not to get lost in the options lol, I didn't even realize there are so many

I just finished editing kernel to my liking. It's absolute beauty everything is well thought out and easy to understand. Thanks for the outstanding kernel.
@tanish2k09 any way to charge fast, it seem really slow to me.

AnOob_701 said:
I just finished editing kernel to my liking. It's absolute beauty everything is well thought out and easy to understand. Thanks for the outstanding kernel.
@tanish2k09 any way to charge fast, it seem really slow to me.
Click to expand...
Click to collapse
Fast charging is enabled by default in latest venom, and it's the fastest you're gonna get in any custom kernel.
It might seem slow for a variety of reasons. First, the chipset is derped, and doesn't know what battery level is actually is. Second, the battery drain causes part of charging to be super fast but other part to be super slow.
Third, the kernel flash didn't quite like itself, so an easy fix would be to reflash the same zip again.

Quite understanding, thanks for the explanation @tanish2k09, I'm gonna keep it as it is, no biggie backup this kernel provide is I'm all about.

[ROM][MIUI9] MiuiPro ROM for Xiaomi Mi 5 (Gemini) stable and developer roms

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MiuiPro rom (based on Chinese rom)
Features of MiuiPro ROMs
Code:
[SIZE="2"]- assembled on the basis of Chinese firmware
- translation languages ​​- Russian, Belarusian, Ukrainian, English, Turkish, Chinese
- own firmware and patch repository
- cut out excess Chinese applications
- optimized system resources and power consumption
- the minimum required for Google services
- extended reboot menu
- M8 weather app with an extended widget and source package
- author's wallpaper, themes and styles of design
- root-rights in the drain, integration of SuperSu
- init.d support
- busybox
- tweaks build.prop
- Keyboard Sony Xperia as the main keyboard
- independent settings
- extended desktop settings (on / off shadows, captions, reflection icons, automatic closing of folders, gestures on the desktop with the ability to choose their own applications for them)
- a modified stock dialer and the application "Phone" (the ability to turn on the maximum screen backlight when you call and configure the action after the end of the call)
- setting the time before selecting a SIM card before making a call
- possibility to activate full-screen photo when calling
- Photo caller default settings - providing photo selection (in normal mode - without full screen)
- the ability to select the default photo when calling
- the ability to hide / show the search bar, "My profile" and "Groups" in contacts and ringing
- call recording quality settings
- flashlight blinking settings when making a call
- advanced settings for network type selection
- smart mobile network - SmartNET
- setting the network type when making a call
- Set the network type when you turn on Wi-Fi
- connection timers
- advanced battery indicator settings
- fixed the notification count on icons
- possibility of on / off. sound when you connect and disconnect the charger
- the ability to manually select the color of the LED from the palette
- various styles of the status bar
- separate ring volume and notifications in the pop-up window
- possibility of on / off. screen when connecting / disabling. charger
- the ability to set the color of the percent text (own, gradient, default)
- the ability to hide / show icons in the status bar
- the view of the switch panel when the curtain is opened (in the joint mode)
- the ability to hide / show the brightness panel in the curtain
- the ability to hide / show the search bar in the curtain
- the ability to hide / show the weather in the blind
- Ability to show LTE icon instead of 4G
- a pop-up message was disabled when selecting the "3G only"
- the ability to install your application to hold the function keys
- endless scrolling of desktops
- camera tweaks (shooting modes, 4K and shooting with the screen off, noise reduction, etc.)
- enable / disable vibration when unlocking with a fingerprint
- setting the number of switches in the curtain
- customize the animation of pop-up notifications
- Yandex search in the browser
- gestures anywhere on the screen with the ability to assign any actions to them
- animation and interpolation of lists (visual effects)
- sound delivery report sms
- screen off animation
- inclusion of rounded corners of the screen
- A-GPS settings
- switching tracks with volume buttons
- FaceID (only for devices with 64-bit processor architecture)
- Assigning your application to a combination of buttons
- weather widget in personal assistant
- and much more…[/SIZE]
MiuiPro ROMs is installed on unlocked (not locked) bootloader​
How to install:
1. If you go from the official ROM or you have a DATA partition encrypted, then we make the FORMAT section data
2. If you switch from the ROM of other localizers, then we make WIPE selected partitions (Delvik / ART Cache, Cache, System, Data) and reboot again in the recovery
3. If you update MiuiPro rom, then just select the archive for the rom and flashing it
Download: [url]https://miuipro.by/rommgr/device/463[/URL]
Additional applications: [url]https://miuipro.by/files/[/URL]
Official Website: [url]https://miuipro.by/[/URL]
Screenshots: [url]https://drive.google.com/drive/u/1/folders/1x_V3_R9FfhdH6dOd7ixw2taciInVJQHh[/URL]
If your language is not in the firmware, then we do not have an interpreter who can translate our settings into your language. if you are proficient in such skills and want to help, contact me in telegram id @АlexPashenko

Thank you Sir, I like to try, downloading now

hans william said:
Thank you Sir, I like to try, downloading now
Click to expand...
Click to collapse
If you just download from the site, then the speed can be small. If you register, you will have access to the Google team disk, from there download much faster, but do as you please, all the best

alexpashenko said:
If you just download from the site, then the speed can be small. If you register, you will have access to the Google team disk, from there download much faster, but do as you please, all the best
Click to expand...
Click to collapse
Thank you for your advise Sir, I'll register for next download,

https://drive.google.com/file/d/1l6JXqHDZ38Hhj3P_VQoDtfWJtN-hOcJO/view
MagicMod

thank you sound recorder is recording the sound is too low

power_510 said:
thank you sound recorder is recording the sound is too low
Click to expand...
Click to collapse
And here the settings exhibited? https://drive.google.com/file/d/1gMxpnLMlI6f66JxmtVh3llBlEnL9qD9y/view?usp=sharing, https://drive.google.com/file/d/1lR_m07BD8lhHOAhohnxYblCGxdZ0hkQX/view?usp=sharing

is possible to show date in status bar near clock? only in this case i can try again stock miui
ps. automatic storage encryption is disabled in this rom right?

FcukBloat said:
is possible to show date in status bar near clock? only in this case i can try again stock miui
ps. automatic storage encryption is disabled in this rom right?
Click to expand...
Click to collapse
yes

alexpashenko said:
yes
Click to expand...
Click to collapse
thanks but yes for which question..? both?

FcukBloat said:
is possible to show date in status bar near clock? only in this case i can try again stock miui
ps. automatic storage encryption is disabled in this rom right?
Click to expand...
Click to collapse
FcukBloat said:
thanks but yes for which question..? both?
Click to expand...
Click to collapse
2

alexpashenko said:
2
Click to expand...
Click to collapse
tx. and may i ask.. no way for you to add option for date in status bar? is the most useful feature for me in custom roms ;(

FcukBloat said:
tx. and may i ask.. no way for you to add option for date in status bar? is the most useful feature for me in custom roms ;(
Click to expand...
Click to collapse
I will ask the team to work on this Also on our site you can leave a request regarding some recommendations or something you would like to see in our firmware

hanu_0771 said:
https://drive.google.com/file/d/1l6JXqHDZ38Hhj3P_VQoDtfWJtN-hOcJO/view
MagicMod
Click to expand...
Click to collapse
what is the different of magic mod version ?

alexpashenko said:
I will ask the team to work on this Also on our site you can leave a request regarding some recommendations or something you would like to see in our firmware
Click to expand...
Click to collapse
but site seems all in Russian language.. impossible for me to understand something there

FcukBloat said:
but site seems all in Russian language.. impossible for me to understand something there
Click to expand...
Click to collapse
In the subject of your device there is an interpreter, and site navigation is duplicated and in English too

gunnered14 said:
what is the different of magic mod version ?
Click to expand...
Click to collapse
MagicMod comes with Magisk preinstalled, and the Miuipro version with supersu.

Does it support for f2fs? out of the box?
Any kernel?

I installed it and after booting it shows something in russian language, i dont*understand jack sh*t, i press something in the middle it sends me to recovery

PetritH said:
I installed it and after booting it shows something in russian language, i dont*understand jack sh*t, i press something in the middle it sends me to recovery
Click to expand...
Click to collapse
maybe you were encrypted?