Related
Hi,
I was trying to root my phone with the guide that is on this forum, but then when i restarted my phone, it was stuck on the white "HTC" boot screen. Then i tried to do a "Factory Reset" in hboot and rebooted, and still stuck on the boot screen. I tried to put a PD98IMG.zip as it was prompted in hboot as "no image or wrong file", so i loaded PD98IMG.zip onto my SD card, and still not working. any suggestions ?
my phone is S-ON.
I guess your phone is branded ? If that's the case, you need to follow the tutorial for a goldcard.
Also, if your rom is 1.7x or 1.8x, you can't root it. You have to follow the downgrade tutorial 1st
Mine took 30 mins to boot once. You could try the ruu look in dev section, you just flash it from Windows, then start again. Was your she branded?
Sent from my Desire HD using XDA App
Howling Wolf said:
I guess your phone is branded ? If that's the case, you need to follow the tutorial for a goldcard.
Also, if your rom is 1.7x or 1.8x, you can't root it. You have to follow the downgrade tutorial 1st
Click to expand...
Click to collapse
<-- This
I was in the same situation, downgraded ROM and clockwork mod and did a restore and it works fine now
@Howling Wolf - I cannot get the CID for the SD card, because
in the 'adb shell' command, my command prompt says "error: device not found". But i want to know, can i still get the CID through another HTC desire phone ? and can i still update a stock rom with S-ON ? and how do i know if my phone is branded ?
I got my phone from Taiwan, a friend brought it over for me, and when i last checked it was on software version 1.37.921.1 .
@turbo_d - ill try that thnx
did you try installing the htc sync software then do adb devices
ye i did, i installed HTC sync to get the HTC drivers, but from what i noticed is that your phone needs to be "running" instead of being stuck on the white HTC boot screen or even the hboot doesnt pick up the device aswell >.<
Totoro_tw said:
ye i did, i installed HTC sync to get the HTC drivers, but from what i noticed is that your phone needs to be "running" instead of being stuck on the white HTC boot screen or even the hboot doesnt pick up the device aswell >.<
Click to expand...
Click to collapse
Try going into bootloader, and then run adb from pc..
@SAPPH1RE - i tried that but thanks for the help !
ok i acquired my CID through linux, but now its telling me
main version is older !
update fail.
any suggiestions ? my current software version of the phone is 1.37, which stock RUU should i be using ?
If you are on 1.37 you should be fine to continue with getting s-off and such. You don't need to upgrade or downgrade your ROM until you achieve s-off. And then you should upgrade to a custom ROM such as LeeDroid.
Sent from my Desire HD using XDA App
did you get it working ?
I fixed mine a few weeks back by doing a full wipe and then loading a fresh ROM
Thing is, i cant get my phone to start up, so i need to flash a stock rom, so that i can get my phone started and then do S-OFF. But it keeps telling me "Main Version is older!"
ive tried 2 roms already, 1.32 and 1.72 RUU. What could be the problem ?
thnx problem solved, the gold card wasnt done properly, so i re did everything.
thnx for the help guys !
paulcoop007 said:
I fixed mine a few weeks back by doing a full wipe and then loading a fresh ROM
Click to expand...
Click to collapse
@paulcoop007 i have same problem with you, same version with your phone and S-ON. and my phone at black screen with htc. how can i fix it. can you explain how did you fix your phone?
I rooted my phone 6 months ago and 1 month ago it started restarting out of a sudden. Another problem was that it did not turn on the first time, so i had to get the battery out and try again to turn on the phone. When i saw that i decided to upgrade with the official Gingerbread Rom for the Desire. Now the problems started getting more and more serious. My phone remains stuck in the htc logo screen...it does not go into recovery and when i tried installing the initial ruu, to try to take it back to warranty it said that the bootloader version is not good. Any ideas how to solve this problem? I would really appreciate some help...
Maybe providing some info, like bootloader information, phone information....
Current Hboot is 1.02.0001, radio 5.17.05.23 and i wish to install RUU_Bravo_Froy2_UK_2.14.207.1_Radio_32.44.00.32U_5.09.05.30_2_release_144166_signed. I have tried to install the ROM by puting the rom file from the ruu on the memory card and renaming it as PB99IMG.zip. Once i turn on the phone in hboot, it loads the image and after 3 minutes is says "Main Version is older! Update Fail!". I have also tried to install the ruu by connecting it to the computer and booting the phone in fastboot. It said the current image version is 3.14.405.1 and the version I will install will be 2.14.207.1. After about 5 minutes in the install process it gets stuck in "Updating Signature" and after that the process stops and the following message is shown:
"ERROR[140]:BOOTLOADER VERSION ERROR
The ROM Update Utility cannot update your Android phone.
Please get the correct ROM Update Utility and try again."
I am currently quite desperate..
Your HBOOT is newer than the one you want to flash.
You nned to downgrade it, which means you have to S-Off your device with revolutionary.io AFAIK.
Then flash one of the HBOOTs from alpharev.nl (downgrader) - then you can flash the RUU.
davebugyi said:
Your HBOOT is newer than the one you want to flash.
You nned to downgrade it, which means you have to S-Off your device with revolutionary.io AFAIK.
Then flash one of the HBOOTs from alpharev.nl (downgrader) - then you can flash the RUU.
Click to expand...
Click to collapse
Can you please give me a more detailed instruction of how to do that? Where can i get revolutionary.io AFAIK from and how do i use it? Thanks in advance
Revolutionary (aka alpharev), from here
http://revolutionary.io/
Not sure where you would get an AFAIK, but As Far As I Know, it doesn't actually exist
777ace said:
Revolutionary (aka alpharev), from here
Not sure where you would get an AFAIK, but As Far As I Know, it doesn't actually exist
Click to expand...
Click to collapse
Can you please tell me how to s-off the phone if the phone cannot start?i tried in fastboot but the software on the computer didn't detect the phone...
You need to be running fastboot in the CMD.exe...
You need to follow the guide for ADB first, then you can use fastboot to flash a new image!
danycosarca said:
Can you please tell me how to s-off the phone if the phone cannot start?i tried in fastboot but the software on the computer didn't detect the phone...
Click to expand...
Click to collapse
Enable USB debugging and connect your phone to PC. Then start revolutionary.
Terepin said:
Enable USB debugging and connect your phone to PC. Then start revolutionary.
Click to expand...
Click to collapse
How can I enable USB debugging if my phone gets stuck at the HTC logo? sorry for being such a pain guys but i am not very experienced in this stuff..
Did you manage to solve it ? I have the same problem , stuck with the boot loop issue after flashing Official RUU 2.3 upgrade. Only have access to fastboot, can't use adb to downgrade.
ridhavm said:
Did you manage to solve it ? I have the same problem , stuck with the boot loop issue after flashing Official RUU 2.3 upgrade. Only have access to fastboot, can't use adb to downgrade.
Click to expand...
Click to collapse
do u previously had any aplharev hboot? like cm7/oxygen hboots?
andQlimax said:
do u previously had any aplharev hboot? like cm7/oxygen hboots?
Click to expand...
Click to collapse
Yes, I had s-off with alpharev. The problem started with boot loop on alpharev screen. I flashed amoled RUU by mistake and had slcd brick.
Now I have installed the correct RUU but still either get stuck on boot loop or on HTC screen. Wonder if the system partitions are screwed up or if they can be restored without adb or s-off.
i did not manage to do anything. all i want to do is to put back the initial ruu so i can take the phone back to warranty. But i don't know how to downgrade hboot.
can anyone please tell me how can i downgrade my hboot? The biggest problem is that i cannot enable usb debugging because my phone is stuck with the bootloop.
danycosarca said:
How can I enable USB debugging if my phone gets stuck at the HTC logo? sorry for being such a pain guys but i am not very experienced in this stuff..
Click to expand...
Click to collapse
Boot into Fastboot and then run RUU. Setup should see it.
I managed to reinstall the official Android 2.3 RUU but the problem is that i want to install the RUU_Bravo_Froy2_UK_2.14.207.1_Radio_32.44.00.32U_5.09.05.30_2_release_144166_signed RUU. From what i have been told, i firstly have to downgrade hboot. Can anyone give me some detailed steps of how to do this?
If I were you, I'd S-OFF with revolutionary, flash recovery and flash a ROM.. when you're S-OFF, there is a way to downgrade... I just haven't got time to search now sorry
That's from my understanding that you re-did the 2.3 RUU and your phone now works.. right?
Unfortunately the phone doesn't start now either
but did it work before? have you tried leaving it for about half an hour and tried turning it on again? (I've seen faults like that). If not try the RUU again, then S-OFF - which makes life SOOOOOOO much easier
Hi Folks,
Having some serious issues with my HTC One X
Upon recieving the device I left it on stock for a couple days and then flashed to ARHD 5.2 by unlocking the bootloader via HTCDev and flashed the rom, allwas awesome.. I have now since seen that yellow tea marks are appearing on one side of the screen, so I would like to return the handset to a stock state so that I may return under warranty.
Here is what I did:
Relocked the boot loader
Flashed stock recovery
This resulted in a security error and the phone refused to boot into anything but the boot loader...
almost identical to this thread:
http://forum.xda-developers.com/showthread.php?t=1649737
I have now solved this boot issue by reflashing the latest custom recovery, and the phone now boots into a nandroid backup that I have restored of the stock ROM.
I have tried to use several RUU's and they all halt after the reboot into bootloader phase (where it erases user data, writes the rom and then does something with signatures)...and the handset itself just stays on a black screen with a HTC logo and there are no progress bars or indication of things happening.. until the RUU errors with 155 (unknown error)
After looking at several threads I have become stuck and would really appreciate some advice
Here are the current details of my phone:
Sim free UK handset
HBOOT-0.94.0000
Radio-1.1204.104.14
CID - I have tried to gather this via fastboot, but it comes up as NONE
(also tried getprop ro.cid via the adb shell but this just errors)
Not sure if it makes any difference but I have also tried the HTC One X AIO Kit.. but any commands it sends error with indications that It cannot locate a device
Please please help
Gomezie said:
Hi Folks,
Having some serious issues with my HTC One X
Upon recieving the device I left it on stock for a couple days and then flashed to ARHD 5.2 by unlocking the bootloader via HTCDev and flashed the rom, allwas awesome.. I have now since seen that yellow tea marks are appearing on one side of the screen, so I would like to return the handset to a stock state so that I may return under warranty.
Here is what I did:
Relocked the boot loader
Flashed stock recovery
This resulted in a security error and the phone refused to boot into anything but the boot loader...
almost identical to this thread:
http://forum.xda-developers.com/showthread.php?t=1649737
I have now solved this boot issue by reflashing the latest custom recovery, and the phone now boots into a nandroid backup that I have restored of the stock ROM.
I have tried to use several RUU's and they all halt after the reboot into bootloader phase (where it erases user data, writes the rom and then does something with signatures)...and the handset itself just stays on a black screen with a HTC logo and there are no progress bars or indication of things happening.. until the RUU errors with 155 (unknown error)
After looking at several threads I have become stuck and would really appreciate some advice
Here are the current details of my phone:
Sim free UK handset
HBOOT-0.94.0000
Radio-1.1204.104.14
CID - I have tried to gather this via fastboot, but it comes up as NONE
(also tried getprop ro.cid via the adb shell but this just errors)
Not sure if it makes any difference but I have also tried the HTC One X AIO Kit.. but any commands it sends error with indications that It cannot locate a device
Please please help
Click to expand...
Click to collapse
Please specify which RUU's you have tried
Hey thanks for your prompt reply, It is greatly appreciated.
Here are the RUU's i have tried:
RUU_ENDEAVOR_U_ICS_40_HTC_Europe_1.28.401.9_Radio_1.1204.103.14_release_256469_signed
RUU_ENDEAVOR_U_ICS_40_HTC_Europe_1.29.401.7_Radio_1.1204.104.14_release_259281_signed
RUU_ENDEAVOR_U_ICS_40_Vodafone_UK_1.26.161.2_Radio_1.1204.90.13_release_251227_signed
Thanks
Where did you get the unit from originally? Was it branded?
This is why you should get the RUU BEFORE flahsing a new ROM
EddyOS said:
Where did you get the unit from originally? Was it branded?
This is why you should get the RUU BEFORE flahsing a new ROM
Click to expand...
Click to collapse
It was purchased from phones4u online.. the phone came unbranded, and is on a vodafone contract.
I am sorry about the RUU.. I wasnt aware it was something you had to acquire first..
You don't HAVE to get it first, it just means you don't have to panic about which one to use!!!
If it's unbranded then 1.29.401.7 or 1.29.401.11 will do the job (I'd go for .11)
Relock the bootloader and run the RUU when in fastboot and you should be good to go!
EddyOS said:
You don't HAVE to get it first, it just means you don't have to panic about which one to use!!!
If it's unbranded then 1.29.401.7 or 1.29.401.11 will do the job (I'd go for .11)
Relock the bootloader and run the RUU when in fastboot and you should be good to go!
Click to expand...
Click to collapse
Thanks mate.. just waiting on the download slots and Ill grab it
Get it here, MUCH quicker
http://www.geeks0.com/downloads/mob...04.105.14_release_260491_signed_c9d22.exe.zip
RUU is in the ZIP file. No idea why it's been changed to lower case but it's the one I used and I maxed out my 8Mbps connection getting it
EddyOS said:
Get it here, MUCH quicker
http://www.geeks0.com/downloads/mob...04.105.14_release_260491_signed_c9d22.exe.zip
RUU is in the ZIP file. No idea why it's been changed to lower case but it's the one I used and I maxed out my 8Mbps connection getting it
Click to expand...
Click to collapse
Spot on mate, I relocked the bootloader and the status reads "*** RELOCKED ***"
The RUU also ran perfectly, thanks for that
Would I just flash a stock recovery to restore the bootloader now? (so that it doesnt say RELOCKED)
I want to ensure that the phone is in the exact shape it needs to be before sending back.
Thanks again
It'll always say relocked - you can't do anything about that...
Ah thats a shame, should be a doorstep swap for a replacement handset anyways so thats probably no issue.
Thanks again mate, you have saved my bacon
-Run your RUU and wait for a complete load.
-go to windows>run and write: %temp%. Find a folder that contains a file called: rom.zip. Get the boot_signed.img and recovery_signed.img.
-flash boot_signed.img and recovery_signed.img.
-fastboot erase cache
-fastboot oem lock
-Do a factory reset with the new recovery.
-Now run your RUU and everything gonna be ok
Sent from my HTC One X using XDA
wolfraim said:
-Run your RUU and wait for a complete load.
-go to windows>run and write: %temp%. Find a folder that contains a file called: rom.zip. Get the boot_signed.img and recovery_signed.img.
-flash boot_signed.img and recovery_signed.img.
-fastboot erase cache
-fastboot oem lock
-Do a factory reset with the new recovery.
-Now run your RUU and everything gonna be ok
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
OP has already got it done, just asked if you could change the bootloader to say 'LOCKED' as it does out the box as opposed to 'RELOCKED'
RUU
So I have kind of a problem, I wanted to unlock my bootloader, only HTCDEV servers are a couples of days now overloaded.
So I can't get the unlock code bin.
I need to use my phone and it won't start normally because new firmare was flashed in RUU mode with JBWFTOOL.
So I want to flash a stock RUU. Only my main version is 3.14.401.41.
My phone was repaired by HTC and I got it back LOCKED and well.
Can I flash a other version RUU or do I have to wait for HTCDEV becoming normal again.
HOX E11 Europe.
H.BOOT 1.39
3.14.401.41
I am not doomed right?
Are you sure.....you don't have 3.14.401.31 as a software number ?
Try this one
http://androidfiles.org/ruu/securek...Radio_5.1204.162.29_release_302015_signed.exe
Put the phone in the bootloader/fastboot usb mode and right click the ruu.exe and select
Run as adminstrator
Mr Hofs said:
Are you sure.....you don't have 3.14.401.31 as a software number ?
Try this one
http://androidfiles.org/ruu/securek...Radio_5.1204.162.29_release_302015_signed.exe
Put the phone in the bootloader/fastboot usb mode and right click the ruu.exe and select
Run as adminstrator
Click to expand...
Click to collapse
Yeah I'm sure, it suprises my also I will try now!
EDIT: Oh no Im not wearing my eyecontacts XD It is 31! XD
jelmer-p said:
Yeah I'm sure, it suprises my also I will try now!
EDIT: Oh no Im not wearing my eyecontacts XD It is 31! XD
Click to expand...
Click to collapse
Yeah i knew that, im on the same cid
Mr Hofs said:
Yeah i knew that, im on the same cid
Click to expand...
Click to collapse
YEAH it worked thanks!
jelmer-p said:
YEAH it worked thanks!
Click to expand...
Click to collapse
Top ! Have fun :thumbup:
HELPPP!!! no OS and scary msg "this bulid is for development process only..."
Something went wrong which I am not gonna explain too much.
Now My phone doesn't have an OS.
I have RELOCKED Bootloader,
I have NO CWM installed. Cannot access with some line when booting "this bulid is for development process only..."
I don't have any rom in the SDCARD.
I can boot into boot loader, I can see fastboot USB.
is there anyway i can flash new rom?
currently im downloading second RUU cause the first one is wrong, but im afraid of the batt went out and wont ever start again...
I feel for you
Can't advise much I'm afraid, but try this thread - should be something in there that will help.
http://forum.xda-developers.com/showthread.php?t=1609190
Oh, and whatever you are not going to explain too much, don't do it again
Yeah don't leave it on. The RUU will cancel out if you don't have at least 30% battery. The only way to recover is to either send the phone into HTC for repair or disassemble to charge the battery manually (if it drops below 30%)
but why you can't charge it sorry? (sorry i'm a king of noob here )
glukosio said:
but why you can't charge it sorry? (sorry i'm a king of noob here )
Click to expand...
Click to collapse
Oh that's true. If you can get into HBOOT then theoretically it'll charge when off. I was thinking it was totally fubarred.
Option 1:
Just unlock it again and it will boot into system.
Option 2:
If you want to have stock rom then leave it relocked
run RUU.....exe grab rom.zip
go in fastboot usb mode
run fastboot oem rebootRUU wait bit till it connects to your computer then run fastboot flash zip rom.zip.
headache.
just got it working from (http://forum.xda-developers.com/showthread.php?t=1609190) -thanks anyway gonzo99, i also found that link through googling and now im unlocked again. below is the line that helps me.
If you re-locked the bootloader
Unlock with the same Unlock_code.bin file provided by HTC and follow this link: http://www.htcdev.com/bootloader/unl...ctions/page-4/
one question, the internet here is very slow, how do i determine which RUU should i use?
It should be the one matching the version you had on your phone originally, e.g. if you had 1.26.401.1 out the box any RUU with x.xx.401.x is suitable
EddyOS said:
It should be the one matching the version you had on your phone originally, e.g. if you had 1.26.401.1 out the box any RUU with x.xx.401.x is suitable
Click to expand...
Click to collapse
Thanks for your fast response EddyOS, can i just run the RUU without the command line, i mean just go through the installation process?
RUUs are Windows EXE applications, just you just run them in Windows
You need a re-locked bootloader to use them, though, and you need to be connected to the PC in fastboot mode for them to work
EddyOS said:
RUUs are Windows EXE applications, just you just run them in Windows
You need a re-locked bootloader to use them, though, and you need to be connected to the PC in fastboot mode for them to work
Click to expand...
Click to collapse
great will give it a try, im waiting my phone charging now while waiting for the download to finished in about 12 minutes.
Many thanks weather it work or not.
Great my phone is now working again...
thanks a lot to all user and others mention in all of this thread...
two thumbs up
Hello,
My adb devices is not showing my device.
I'm pretty sure I forgot to activate developer mode and turn on USB debugging. I can not flash any room and I'm stuck in a boot loop or just using TWRP. I'm completely lost in a way to get beyond this. I've been searching XDA for 4.5 hours straight and it seems some people have 80% of my problem but not 100%. I decided initially to follow a Youtube video that didn't mention anything about USB debugging so I'm wondering if that's the main issue in all of this. I've tried going back to stock RUU, through Hasoon2000's allinone but I keep getting failures. Just at a loss and would appreciate any help. I'm trying to go to the Skydragon Rom, but I'm willing to go back to stock to work my way back up. I've initially rooted this type of phone before, but I didn't follow the same method as last time(which was Hasoon's) as I thought it would work the same, I used this Youtube video, youtube/watch?v=_yo4eoCfxmE. (sorry link is weird cause I can't post links yet, add a .com after youtube!) I do not have S-Off. I just wanna know what I can do to get back to Skydragon or at least back to stock before my girlfriend beats my ass for messing up her phone
Valkalkas said:
Hello,
My adb devices is not showing my device.
I'm pretty sure I forgot to activate developer mode and turn on USB debugging. I can not flash any room and I'm stuck in a boot loop or just using TWRP. I'm completely lost in a way to get beyond this. I've been searching XDA for 4.5 hours straight and it seems some people have 80% of my problem but not 100%. I decided initially to follow a Youtube video that didn't mention anything about USB debugging so I'm wondering if that's the main issue in all of this. I've tried going back to stock RUU, through Hasoon2000's allinone but I keep getting failures. Just at a loss and would appreciate any help. I'm trying to go to the Skydragon Rom, but I'm willing to go back to stock to work my way back up. I've initially rooted this type of phone before, but I didn't follow the same method as last time(which was Hasoon's) as I thought it would work the same, I used this Youtube video, youtube/watch?v=_yo4eoCfxmE. (sorry link is weird cause I can't post links yet, add a .com after youtube!) I do not have S-Off. I just wanna know what I can do to get back to Skydragon or at least back to stock before my girlfriend beats my ass for messing up her phone
Click to expand...
Click to collapse
haha... Love :victory:
Now back to issue.
If you're in the bootloader you don't need USB Debugging enabled, you can still use the fastboot command regardless of USB debugging mode. Check
Code:
fastboot devices
not
Code:
adb devices
.
Make sure all the drivers are still fine on the PC, reinstall if you must.
On a side note, try not to use all-in-one toolkits as you really don't get to learn from using something like that. If you did it manually you'd already have a pretty good understanding on which command gets used in which instance i.e bootloader vs in-system.
I actually didn't use a all-in-one this time around but as soon as I unlocked boot loader and rooted I had issues installing the custom rom. I've used both phil z and twrp but it still gets stuck when I install the sky dragon, or viper for that matter to test and make sure it wasn't just a bad download. Earlier when I did fast boot devices it did show something but now it's just a blank space. I'm in bed now I would double check again to make sure but like I said it's been a few hours and now it's 4:38 am and I'm tired. I'll double check in the morning but I appreciate your response and I'll double check. Drivers should be good from last time but I will double check and make sure. Again thanks for responding!
Alright, now after some rest I've checked the fastboot devices and it does show up.
Tried flashing to latest SkyDragon again and it just sits on the HTC screen before boot looping.
The device is S-On, unlocked and says tampered. I've tried flashing the boot.img in bootloader after flashing the rom but still no dice.
Valkalkas said:
Alright, now after some rest I've checked the fastboot devices and it does show up.
Tried flashing to latest SkyDragon again and it just sits on the HTC screen before boot looping.
The device is S-On, unlocked and says tampered. I've tried flashing the boot.img in bootloader after flashing the rom but still no dice.
Click to expand...
Click to collapse
Latest skydragon, ARHD, InsertCoin and many more are meant for hboot 3.18 and above. If you boot to bootloader and see your hboot is 3.16, these ROMs won't work properly for you.
So check your hboot no.
Next ... check your CID and MID
If possible the OS version no. on bootloader too
You may need to revert to your stock ROM ... then check any OTA for your device
ckpv5 said:
Latest skydragon, ARHD, InsertCoin and many more are meant for hboot 3.18 and above. If you boot to bootloader and see your hboot is 3.16, these ROMs won't work properly for you.
So check your hboot no.
Next ... check your CID and MID
If possible the OS version no. on bootloader too
You may need to revert to your stock ROM ... then check any OTA for your device
Click to expand...
Click to collapse
Alright yeah, my hboot is 3.16. Tried looking up ways to update the fastboot but all I've seen is requiring S-Off.
CID is CWS____001
MID is 0P6B12000
The OS is blank, just says OS- (blank space)
Gonna try flashing stock recovery again.
Valkalkas said:
Alright yeah, my hboot is 3.16. Tried looking up ways to update the fastboot but all I've seen is requiring S-Off.
CID is CWS____001
MID is 0P6B12000
The OS is blank, just says OS- (blank space)
Gonna try flashing stock recovery again.
Click to expand...
Click to collapse
Yours is At&T (if I'm not wrong as I'm not familiar with this Sprint, Verizon and AT&T)
And there are RUU for both 4.4.2 and 4.4.3 (hboot 3.16 and 3.18) ... it's best for you to head over AT&T forum for better guidance.
http://forum.xda-developers.com/showthread.php?t=2757462
http://forum.xda-developers.com/att-htc-one-m8/general/htc-one-m8-ruu-m8ul-4-4-3-t2860423
ckpv5 said:
Yours is At&T (if I'm not wrong as I'm not familiar with this Sprint, Verizon and AT&T)
And there are RUU for both 4.4.2 and 4.4.3 (hboot 3.16 and 3.18) ... it's best for you to head over AT&T forum for better guidance.
http://forum.xda-developers.com/showthread.php?t=2757462
http://forum.xda-developers.com/att-htc-one-m8/general/htc-one-m8-ruu-m8ul-4-4-3-t2860423
Click to expand...
Click to collapse
Alright, thank you for your help. I relocked and I tried the second link you posted, but the ruu messes up after I accept the EULA and just keeps popping up boxes. Downloading the RUU from the first link now and gonna try that. I just run the RUU in fastboot usb right?
Again thanks, I had no idea to check for hboot versions when rooting/flashing in the time I've rooted some devices so guess I'm learning something the hard way.
Edit: Same thing with the first link. I feel like I'm in the wrong place trying to run the RUU in fastboot usb?
Alright, tried running the RUU's again on the black screen with the silver HTC letters as suggested by someone else and the program still acts up after the EULA.
Alright, I was able to find a nandroid backup and restore it through there, so now I'm back in business. Thanks for the help!