[Q] Error status 7 (CM 11) - HTC Wildfire S

Hello!
I recently rooted my WFS and installed CM 10.1.
Today, I downloaded CM11, tried to install it, but installation aborts with error status 7.
I bough my WFS in Croatia, already successfully installed few roms so I am a little bit confused. Am I missing something here?

Mavrinac said:
Hello!
I recently rooted my WFS and installed CM 10.1.
Today, I downloaded CM11, tried to install it, but installation aborts with error status 7.
I bough my WFS in Croatia, already successfully installed few roms so I am a little bit confused. Am I missing something here?
Click to expand...
Click to collapse
Might be because of the recovery.....you will have to flash a newer recovery(TWRP 2.7.0.0 or CWM 6.0.4.8) to flash kitkat based roms

csoulr666 said:
Might be because of the recovery.....you will have to flash a newer recovery(TWRP 2.7.0.0 or CWM 6.0.4.8) to flash kitkat based roms
Click to expand...
Click to collapse
Okay, my friend installed recovery for me, could you please write brief step by step dummy guide for me?
I mean, I'm not a noob, I just never did this on my own so if you could provide me with all the links it would be very cool of you. Thanks!

Mavrinac said:
Okay, my friend installed recovery for me, could you please write brief step by step dummy guide for me?
I mean, I'm not a noob, I just never did this on my own so if you could provide me with all the links it would be very cool of you. Thanks!
Click to expand...
Click to collapse
ako sam dobro skužil iz hrvatske si pa budem na hrv napisal...uđeš u recovery,napraviš factory reset,instaliraš rom,instaliraš patch za kameru....restartaš i pričekaš da se sve učita,onda ugasi mob i ponovo uđi u recovery,ako imaš sd-ext odeš u mount/storage i formatiraj sd-ext,instaliraj gapps za cm11 i instaliraj int2ext scriptu(ovo samo ako koristiš sd-ext)
EDIT:
ako neznaš kak instalirat recovery,najlakše ti je da skineš http://forum.xda-developers.com/showthread.php?t=2740145 i staviš ga na sdcarticu, i ako imaš instaliran terminal emulator samo koristi ovo:
http://forum.xda-developers.com/showpost.php?p=52458050&postcount=136

Kenny_cro said:
ako sam dobro skužil iz hrvatske si pa budem na hrv napisal...uđeš u recovery,napraviš factory reset,instaliraš rom,instaliraš patch za kameru....restartaš i pričekaš da se sve učita,onda ugasi mob i ponovo uđi u recovery,ako imaš sd-ext odeš u mount/storage i formatiraj sd-ext,instaliraj gapps za cm11 i instaliraj int2ext scriptu(ovo samo ako koristiš sd-ext)
EDIT:
ako neznaš kak instalirat recovery,najlakše ti je da skineš http://forum.xda-developers.com/showthread.php?t=2740145 i staviš ga na sdcarticu, i ako imaš instaliran terminal emulator samo koristi ovo:
http://forum.xda-developers.com/showpost.php?p=52458050&postcount=136
Click to expand...
Click to collapse
probat cu, hvala!

Mavrinac said:
Okay, my friend installed recovery for me, could you please write brief step by step dummy guide for me?
I mean, I'm not a noob, I just never did this on my own so if you could provide me with all the links it would be very cool of you. Thanks!
Click to expand...
Click to collapse
1. The recovery threads are on the first page of the development section. Download any one you want( between TWRP 2.7.0.0 and CWM 6.0.4.8). It will be an img file.
2. Put it on your sdcard(not inside any folder)
3. Download Terminal Emulator from the Play Store.
4. Open it and type "su", grant it superuser access
5. Now type the following command
Code:
flash_image recovery /sdcard/nameofrecovery,img
"nameofrecovery" refers to the exact name the img file has

csoulr666 said:
1. The recovery threads are on the first page of the development section. Download any one you want( between TWRP 2.7.0.0 and CWM 6.0.4.8). It will be an img file.
2. Put it on your sdcard(not inside any folder)
3. Download Terminal Emulator from the Play Store.
4. Open it and type "su", grant it superuser access
5. Now type the following command
Code:
flash_image recovery /sdcard/nameofrecovery,img
"nameofrecovery" refers to the exact name the img file has
Click to expand...
Click to collapse
Big thanks to kenny_cro and see soul are triple six!
I'm happy to see confused people like me can rely on people like you! Big thanks!

Related

[Q] Black Notes tearing problem

hi im currently using the black notes hybrid rom... i experience thr is tearing when moving between screen... so anyone know how to outcome this problem??? is there any apps that could solve this...pls i need step to step instructions on this prob...thanksss
shan1188 said:
hi im currently using the black notes hybrid rom... i experience thr is tearing when moving between screen... so anyone know how to outcome this problem??? is there any apps that could solve this...pls i need step to step instructions on this prob...thanksss
Click to expand...
Click to collapse
Install the latest COW kernel, it will solve the problem
Regards
rio sorry im still noob ...can u provide the instruction on hw to install the files ...thanks
Rio Saputro said:
Install the latest COW kernel, it will solve the problem
Regards
Click to expand...
Click to collapse
can u pls gv me the instructions on hw to install this...sorry im still noob...do i hv to flash this using CWM or anything else.thanks
Edited...my bad !
Sent From My Ancora ICS CM9
andynroid said:
Flash both in CWM without format or wipe..
Sent From My Ancora ICS CM9
Click to expand...
Click to collapse
do i need to zip both and then go into CWM and restore or how ...
You need :
ADB/Terminal
Root Explorer
Put the boot.img on your SDcard then put this into command
Code:
su
dd if=/sdcard/boot.img of=/dev/block/mmcblk0p8
Then put dhd ko on system/etc/wifi with root explorer
Reboot
hey rio is the valuepack I8150XXLM6 compatible with blacknotes essential ?
chocolemon said:
hey rio is the valuepack I8150XXLM6 compatible with blacknotes essential ?
Click to expand...
Click to collapse
Not yet...
May i make one ?
Or you mean only kernel, it compatible
Rio Saputro said:
You need :
ADB/Terminal
Root Explorer
Put the boot.img on your SDcard then put this into command
Code:
su
dd if=/sdcard/boot.img of=/dev/block/mmcblk0p8
Then put dhd ko on system/etc/wifi with root explorer
Reboot
Click to expand...
Click to collapse
thanks fr the info...nw its smooth n rio the rom is awesome...juz one request if can could make an update fr the value pack so the rom will be perfect...thanks
Sent from my GT-I8150 using XDA
shan1188 said:
thanks fr the info...nw its smooth n rio the rom is awesome...juz one request if can could make an update fr the value pack so the rom will be perfect...thanks
Sent from my GT-I8150 using XDA
Click to expand...
Click to collapse
Latter, after my friend is back
I'm on SG2 & Motorola Defi Dev for now
help x.x
Rio Saputro said:
You need :
ADB/Terminal
Root Explorer
Put the boot.img on your SDcard then put this into command
Code:
su
dd if=/sdcard/boot.img of=/dev/block/mmcblk0p8
Then put dhd ko on system/etc/wifi with root explorer
Reboot
Click to expand...
Click to collapse
hi rio, is there another way to do this? like flash a zip or something? im having trouble with adb..sorry im new to this. i just rooted my phone a few days ago..flashed 2 roms and so far i like yours the best!

[ROM,CWM,TOOLS] Symphony (W25,W50,W60,T7) And Walton (Primo,Primo_F1,Primo_G1)

[NOTE : If 4shared sharing link is not working then try this link d-h.st/users/droidbit]
Personal Collection and work on Android Devices which includes.....
Collection of Drivers,Custom kernel,Recovery,Rom,Flash Tools etc
Devices
#Symphony W25
#Symphony W50
#Symphony W60
#Symphony W90
#Symphony T7(TAB)
#Walton Primo
#Walton Primo F1
#Walton Primo G1
#More Coming Soon..... ^_^
All in One In My 4Shared Folder....... Enjoy........
http://www.4shared.com/account/dir/2W01dryp#dir=628601261
All of the content regarding Symphony Android has been moved to a new separate thread due to maintenance issue
New thread [ROOT,CWM,TOOLS] Symphony Android Shop ( W25,W50,W60,T7 )
All of the content regarding Walton Android has been moved to a new separate thread due to maintenance issue
New thread [ROOT,CWM,TOOLS] Walton Android Shop ( Primo,Primo_F1,Primo_G1 )
&&&&&&&&&&&&&&&&&&&&&&&&&&&& Special Thx to * for Devices &&&&&&&&&&&&&&&&&&&&&&&&&&&&&
Shagor : Walton Primo , Symphony w25 , Symphony w60 , Walton Primo R1 , Micromax Canvas 2 (A110)
Kaushik : Walton Primo , Walton Primo F1
Adib/Neil : Symphony w20 , Walton Primo
Ibrar : Symphony w50 , Walton Primo G1 , Symphony T7(tab)
Roni vai : Symphony W90
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Click to expand...
Click to collapse
other cloude storage
can u please upload those files to other cloud storage like mediafire.com, please
link not valid. plz provide different link
ahmed.zunaid said:
link not valid. plz provide different link
Click to expand...
Click to collapse
links updated ... @ ahmed.zunaid
Link error bro, please upload a a valid link.
Shuvopaul said:
Link error bro, please upload a a valid link.
Click to expand...
Click to collapse
links updated
thebdcoder said:
links updated
Click to expand...
Click to collapse
Walton Primo G1 Custom Kernel er Features ki ki add korsen? plz explain! i would lyk 2 try it!
@thebdcoder can you please provide me a CWM mod for Walton Primo G2? can't find one....Hope you don't ignore my request.
Thanks
vbtechx said:
@thebdcoder can you please provide me a CWM mod for Walton Primo G2? can't find one....Hope you don't ignore my request.
Thanks
Click to expand...
Click to collapse
To compile any CWM or Custom Recovery stock recovery is a must...
I dont have any G2 near me so If you can pull stock recovery from your primo g2 then i
can make one for you..
Here how you can pull stock recovery from your Primo G2
Note : this Method will only work on Qualcomm snapdragon Devices like Primo G2. .. Dont Apply this
method if you dont have any Qualcomm Snapdragon devices..
Click to expand...
Click to collapse
Your Primo G2 have to be rooted first ..
To root your Primo G2 Download This and then root your devices...
Then download this ( Adb tools )
Extract the adb folder out of ZIP . Go to adb folder and press ctrl+shift on your keyboard and then right click on your mouse
then selsect Open command window here ..
Now type :
adb shell
su
dd if=/dev/block/mmcblk0p16 of=/sdcard/recovery.img
Akta file recovery.img name sdcard e joma hobe.... ota upload kore amake link ta dite hobe.
Ami tokhon ota theke tomader jonno CWM baniea dibo...
thebdcoder said:
To compile any CWM or Custom Recovery stock recovery is a must...
I dont have any G2 near me so If you can pull stock recovery from your primo g2 then i
can make one for you..
Here how you can pull stock recovery from your Primo G2
Your Primo G2 have to be rooted first ..
To root your Primo G2 Download This and then root your devices...
Then download this ( Adb drivers )
Extract the adb folder out of ZIP . Go to adb folder and press ctrl+shift on your keyboard and then right click on your mouse
then selsect Open command window here ..
Now type :
adb shell
su
dd if=/dev/block/mmcblk0p16 of=/sdcard/recovery.img
Akta file recovery.img name sdcard e joma hobe.... ota upload kore amake link ta dite hobe.
Ami tokhon ota theke tomader jonno CWM baniea dibo...
Click to expand...
Click to collapse
Some custom ROMs for W60?
How can i root Symphony W70? AS W70 is based on MT6577 processor so i tried to follow this link - http://gleescape.com/?p=1466. But when i went to step 3 it said that my device is offline. Can you please help me? I cannot install Endomondo on this!!
I had already pulled stock recovery before
Check your PM's can't post link here due to Posting limitations(10 posts for outside links)
Also CWM install korar por ke jei konno custom rom use korte parbo and jellybean also?
P.S when you upload the CWM please onno hosting e upload korien. Thanks
.
insane_artist said:
How can i root Symphony W70? AS W70 is based on MT6577 processor so i tried to follow this link - But when i went to step 3 it said that my device is offline. Can you please help me? I cannot install Endomondo on this!!
Click to expand...
Click to collapse
theres a single click root procedure available in waltonforumDOTcom.
cant post the link so please google
CWM for F1?
thebdcoder said:
To compile any CWM or Custom Recovery stock recovery is a must...
I dont have any G2 near me so If you can pull stock recovery from your primo g2 then i
can make one for you..
....
...Akta file recovery.img name sdcard e joma hobe.... ota upload kore amake link ta dite hobe.
Ami tokhon ota theke tomader jonno CWM baniea dibo...
Click to expand...
Click to collapse
thebdcoder ভাই, i own a walton F1 and can i please request you to make CWM for our PRIMO F1? i have already uploaded recovery.img here and in 4shared hosting. please waste sometime and make a cwm for us. we F1 users will be very grateful
insane_artist said:
How can i root Symphony W70? AS W70 is based on MT6577 processor so i tried to follow this link - http://gleescape.com/?p=1466. But when i went to step 3 it said that my device is offline. Can you please help me? I cannot install Endomondo on this!!
Click to expand...
Click to collapse
well i saw w70 yesterday and it is ISC 4.04 whis is a gud news for the MTk user.....
So follow this.....
Here is the universal way to root any ISC (I have tested it on 9 devices and 3 tab)
Dl this ... http://www.4shared.com/rar/qonqu3Yc/root_g1.html
Download this file and then enter the folder root_g1
1. Connect your android to your PC (Windows) with USB Debugging Enabled.
2. Run runme.bat after that press 4 and then press enter.
3. Go to your android and unlock the screen if it is locked then you can see a page With
touch "Restore my data" and then wait .
4. Its finished and your android will reboot when process is completed.. You will see a
message showing "Android is Upgrading" only for once .
5. Install DroidVpn or RootExplorer or ChaniFire to test the Root
6. Enjoy the Root Previlages
i tried to make cwm recovery witj the online builder and got the recovery img but when i tried to flash it with mobileuncle, it booted to the stock walton recovery :s
would you please help me with the recovery
iamhsn said:
i tried to make cwm recovery witj the online builder and got the recovery img but when i tried to flash it with mobileuncle, it booted to the stock walton recovery :s
would you please help me with the recovery
Click to expand...
Click to collapse
here is the custom compiled CWM from me...
http://www.4shared.com/file/y2U1f44n/cwm_primo_f1.html
just jot it out of oven it still hot....
update using dont use mobile unlcle tools from market ..... they are very different than the one i have just provided ....
http://www.4shared.com/file/uu38csEU/mobileuncle_tools_for_g1.html
vbtechx said:
I had already pulled stock recovery before
Check your PM's can't post link here due to Posting limitations(10 posts for outside links)
Also CWM install korar por ke jei konno custom rom use korte parbo and jellybean also?
P.S when you upload the CWM please onno hosting e upload korien. Thanks
Click to expand...
Click to collapse
thank u for your stock... well i tried to build it with build.clockworkmod.com but it failed . it never happen before..
here is the console output
http://jenkins.cyanogenmod.com/job/recovery/22254/console
well then it will take long to make cwm for primo g2 untill anyone already ported it.....
thebdcoder said:
here is the custom compiled CWM from me...
http://www.4shared.com/file/y2U1f44n/cwm_primo_f1.html
just jot it out of oven it still hot....
update using dont use mobile unlcle tools from market ..... they are very different than the one i have just provided ....
http://www.4shared.com/file/uu38csEU/mobileuncle_tools_for_g1.html
Click to expand...
Click to collapse
thank you bro, it worked like a charm. please update your first post with this CWM for F1. a whole lot of people will love your work and this shall help with their creepy F1
you are the man!
thankd
Symphony w50 backup
Bro please upload Symphony w50 backup file . which is created by clockword mode recovery . Please

Xperia M Dual C2004/5 FW 15.2A.1.12 + Root

Finally i found this rootingtool:
MOD edit: links removed
it works.
I can´t really see what i am doing but i got root. After installing i changed to SuperSU.
It would be wonderful if somebody could translate and give some information about website and software.
Firmware is just uploading ... will post link later.
Thanks for the ROOT..
Here is the English version of this program..
http://forum.xda-developers.com/showthread.php?t=2442512
Here is The Firmware Link:
SONY Xperia M Dual (Version 4.1.2) C2005
http://www.xperiadownload.cz/phocadownload/userupload/download/2013/MDual/C2005_15.2.A.1.12_CE.rar
engineer_dhaval said:
Thanks for the ROOT..
Here is the English version of this program..
http://forum.xda-developers.com/showthread.php?t=2442512
Here is The Firmware Link:
SONY Xperia M Dual (Version 4.1.2) C2005
http://www.xperiadownload.cz/phocadownload/userupload/download/2013/MDual/C2005_15.2.A.1.12_CE.rar
Click to expand...
Click to collapse
plese provide steps for making sd card as internal memory i tried using link2sd(http://www.xperiablog.net/2011/12/12/link2sd-guide-never-worry-about-internal-memory-limits-again/) and phone got soft brick
sidrock622 said:
plese provide steps for making sd card as internal memory i tried using link2sd(http://www.xperiablog.net/2011/12/12/link2sd-guide-never-worry-about-internal-memory-limits-again/) and phone got soft brick
Click to expand...
Click to collapse
Bro If u want to play big games like gameloft just use FOLDER MOUNT app thats it..
U wont need to swap storage..
Just follow FOLDER MOUNT instructions..
http://forum.xda-developers.com/showthread.php?t=2192122
engineer_dhaval said:
Bro If u want to play big games like gameloft just use FOLDER MOUNT app thats it..
U wont need to swap storage..
Just follow FOLDER MOUNT instructions..
http://forum.xda-developers.com/showthread.php?t=2192122
Click to expand...
Click to collapse
i tried folder mount gl to sd
once i press mount the mobile starts rebooting
sidrock622 said:
i tried folder mount gl to sd
once i press mount the mobile starts rebooting
Click to expand...
Click to collapse
Sound like it needs root fixing, download and install busybox has to be installed in system/xbin folder there's a choice on install location then install using normal install, once done try the root fixer app I shared in the c1904/1905 root method to fix the root and see if you can edit the system files then let me know if it's successfull
Root fixer tool
http://db.tt/DC4eThdt
Sent from my C1905 using xda premium
dunc4n88 said:
Sound like it needs root fixing, download and install busybox has to be installed in system/xbin folder there's a choice on install location then install using normal install, once done try the root fixer app I shared in the c1904/1905 root method to fix the root and see if you can edit the system files then let me know if it's successfull
Root fixer tool
http://db.tt/DC4eThdt
Sent from my C1905 using xda premium
Click to expand...
Click to collapse
Ya i installed busy box
I tried this method http://forum.xda-developers.com/showthread.php?p=45232179 (thank god no soft brick) cannot swap
and https://www.facebook.com/login.php?...m/groups/155397614660923/doc/156908834509801/ (even fixing with reboot fix d device went bootloop and soft briocked)
after fixing rebootfix.rar i tried mounting via folder mount and gl to sd application both resulted same when clicked mount icon immediatly device reboots(no soft brick) :crying::crying::crying::crying::crying::crying:
sorry for bad english
---------- Post added at 03:07 AM ---------- Previous post was at 03:05 AM ----------
engineer_dhaval said:
Thanks for the ROOT..
Here is the English version of this program..
http://forum.xda-developers.com/showthread.php?t=2442512
Here is The Firmware Link:
SONY Xperia M Dual (Version 4.1.2) C2005
http://www.xperiadownload.cz/phocadownload/userupload/download/2013/MDual/C2005_15.2.A.1.12_CE.rar
Click to expand...
Click to collapse
c2005 (15.2.A.1.12) jelly bean version is 4.2.2 right??
sidrock622 said:
Ya i installed busy box
I tried this method http://forum.xda-developers.com/showthread.php?p=45232179 (thank god no soft brick) cannot swap
and https://www.facebook.com/login.php?...m/groups/155397614660923/doc/156908834509801/ (even fixing with reboot fix d device went bootloop and soft briocked)
after fixing rebootfix.rar i tried mounting via folder mount and gl to sd application both resulted same when clicked mount icon immediatly device reboots(no soft brick) :crying::crying::crying::crying::crying::crying:
sorry for bad english
---------- Post added at 03:07 AM ---------- Previous post was at 03:05 AM ----------
c2005 (15.2.A.1.12) jelly bean version is 4.2.2 right??
Click to expand...
Click to collapse
See the source site:
http://www.elunchen.com/p/sony-firmware.html#.UlePjlflL3V
Where u can find all xperia firmware..
Firmware C2005 15.2.A.1.12
Link to the FW. It´s extracted from phone.
http://netload.in/dateiWmZJzxJnuw/XperiaMDual_15.2.A.1.12_CE.ftf.htm
ernvs said:
Finally i found this rootingtool:
it works.
I can´t really see what i am doing but i got root. After installing i changed to SuperSU.
It would be wonderful if somebody could translate and give some information about website and software.
Firmware is just uploading ... will post link later.
Click to expand...
Click to collapse
This is not working on my phone. I am on c2004 JB 4.2.2 build 15.2.A.1.12
this is my first post so no external links allow,
Vroot
sam4android said:
This is not working on my phone. I am on c2004 JB 4.2.2 build 15.2.A.1.12
this is my first post so no external links allow, i am talking about vroot
Click to expand...
Click to collapse
Wich version of vroot id you use? I used chinese 1.7.
sam4android said:
This is not working on my phone. I am on c2004 JB 4.2.2 build 15.2.A.1.12
this is my first post so no external links allow, i am talking about vroot
Click to expand...
Click to collapse
Vroot works but cannot change to supersu
sidrock622 said:
Vroot works but cannot change to supersu
Click to expand...
Click to collapse
Install supersu from market then find a root uninstaller app and uninstall the Chinese su app that's how I did it on the dual sin firmware
Sent from my C2005 using xda premium
After vroot I used SuperSu. Gaining root access for SuperSu and changed su bin from SuperSu menu. Then uninstalled vroot bin.
Sent from my GT-p6800
PAC-Man ROM 4.2 Milestone1
ernvs said:
After vroot I used SuperSu. Gaining root access for SuperSu and changed su bin from SuperSu menu. Then uninstalled vroot bin.
Sent from my GT-p6800
PAC-Man ROM 4.2 Milestone1
Click to expand...
Click to collapse
Lets forget about the root
waiting for swapping internal memory badly
still no solution
xperia c dual have app2sd support its jelly bean version is 4.2.2
can anyone port tat firmware to our device??
phone reboots when root app launched....
thanks for suggesting this one click app
rooted successfully my phone with this method {using vroot} but when i try to launch any root required app. such as {gl to sd} phone just reboots also tried root fix but nothing happened .... and as superuser installed was different i want to replace it with the one available in play store is there any method to do it. . .kindly help ... and offer your suggestions.....
thank you
using Xperia M dual c 2004 adroid v 4.2.2
firmware 15.2.A.1.12
xperiamdual said:
thanks for suggesting this one click app
rooted successfully my phone with this method {using vroot} but when i try to launch any root required app. such as {gl to sd} phone just reboots also tried root fix but nothing happened .... and as superuser installed was different i want to replace it with the one available in play store is there any method to do it. . .kindly help ... and offer your suggestions.....
thank you
using Xperia M dual c 2004 adroid v 4.2.2
firmware 15.2.A.1.12
Click to expand...
Click to collapse
Its the issue wait for some more days developers will provide solution
hai any upload 4.2.2 system ui.apk from xperia m or m dual
Thank you,
Aeron.
Aeron sagar said:
hai any upload 4.2.2 system ui.apk from xperia m or m dual
Thank you,
Aeron.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2477660
ernvs said:
Wich version of vroot id you use? I used chinese 1.7.
Click to expand...
Click to collapse
yeh dude ur rite.... it was version problem. i was using 1.6... rooted successfully with 1.7

[Coolpad Dazen 1] [Guide] How to remove root text from boot screen completely ?

PLEASE VISIT UPDATED THREAD
:HERE:​http://forum.xda-developers.com/gen...t-solution-t3316364/post65360320#post65360320
In this guide i will describe the procedure of complete removal of 'root' text from boot screen of Coolpad Dazen 1. This will allow you to claim the warranty.
Things you will need.
A PC or Laptop and your coolpad Dazen 1.
You need to have root access for this process. So root your device again if its not rooted. (use Kingroot or iroot)
Stock firmware .CPB file. downlod rar here an extract: downloads.msggsm.com/download.php?....4.120.00.T1.150511.8297L_I00.def.rar&start=1
Drivers.
Install the Coolpad Download Assistant Setup V1.89_141205 and know the process of flashing from here: http://bbs.coolpad.com/thread-4185136-1-1.html (use google chrome to translate)
NOTE: I WILL NOT BE HELD RESPONSIBLE FOR ANY SORT OF DAMAGE THAT MAY HAPPEN TO YOUR PHONE OR EVEN YOUR BRAIN THIS IS A TESTED PROCESS IT WORKED FOR ME AND IT SHOULD WORK FOR YOU AS WELL IF YOU FOLLOW THE STEPS CAREFULLY AND USE A LITTLE BRAIN. THIS IS FOR COOLPAD DAZEN 1 ONLY.
STEPS:
#1. Enable USB debugging.( you should know how to do this, if u don't know then u should not be following this guide :laugh::laugh:)
#2. Connect your phone to pc, open a command window in your adb folder.
#3. Type these commands. and allow super user permission from your phone when prompted.
Code:
adb shell
adb su
dd if=/dev/block/mmcblk0p22 of=/tmp/yl_params.orig bs=4096 count=256
dd if=/dev/zero of=/tmp/yl_params.orig bs=1 count=268 seek=9232 conv=notrunc
dd if=/tmp/yl_params.orig of=/dev/block/mmcblk0p22 bs=4096 count=256
#4. After successful execution of above commands unplug the cable from your phone, do not shut down, do not restart, directly remove the battery.
#5. Open coolpad download assistant, select the.cpb file, after checking the rom, pressing the volume up key plug usb cable back, messege will pop-up, and then press the volume up button to confirm, enter fastboot flash the official ROM.
After the completion, the phone automatically shuts down, charging interface will come up, Now manually reboot your phone. HURRAY!!! root word disappears.
CHEERS..:highfive::highfive:
LET ME KNOW IF THIS GUIDE NEEDS CORRECTIONS OR IMPROVMENTS.
PLEASE VISIT UPDATED THREAD
:HERE:​http://forum.xda-developers.com/gen...t-solution-t3316364/post65360320#post65360320
HIT THANKS BUTTON IF I HELPED YOU​
It will support ota or not
---------- Post added at 07:53 AM ---------- Previous post was at 07:44 AM ----------
I think BBS tool se better ygdp tool rahega stock rom indtallation ke liye
paramparmatma said:
It will support ota or not
---------- Post added at 07:53 AM ---------- Previous post was at 07:44 AM ----------
I think BBS tool se better ygdp tool rahega stock rom indtallation ke liye
Click to expand...
Click to collapse
You can try ygdp tool. By the way CDA is also a official tool from coolpad.
It will support OTA, u will have to manually install from recovery.
Recovery me chinese option rahte hai kuch pata hi nahi chalta waise ota ka link hai to provide kare
Upload karna padega.
And i m not 100% sure ye support krge ya nhi.. But you can always try..
Waise tum service centre jaane wale the na??
Nahi jaunga sale 1 se 2 mahina lagaenge ise bech dunga kisi ko utna sensor ke bare me bahut log nahi jante 4000 de raha hai ek banda
paramparmatma said:
Nahi jaunga sale 1 se 2 mahina lagaenge ise bech dunga kisi ko utna sensor ke bare me bahut log nahi jante 4000 de raha hai ek banda
Click to expand...
Click to collapse
Yaar khali fokat mujhse mehnat karwa di jab service centre jaana hi nhi toh root text hata kar fayeda hi kya??
Waise baat v tumhari sahi hai saale service centre waale 1 - 2 mahina to lagaenge hi....
jackey31 said:
Yaar khali fokat mujhse mehnat karwa di jab service centre jaana hi nhi toh root text hata kar fayeda hi kya??
Waise baat v tumhari sahi hai saale service centre waale 1 - 2 mahina to lagaenge hi....
Click to expand...
Click to collapse
Iss se toh doosre ko faida toh hua na, and by the way ur process will remove custom recovery or not?
Oh.. yes...
Ha custom recovery hat jayegi kyu ki hum stock rom flash kr rahe hai na..
Fir se recovery install kr lena..
Update zip upload karo plz
It's asking about permission while downloading cpb file by ur given link
paramparmatma said:
Update zip upload karo plz
Click to expand...
Click to collapse
Sorry dude.. I have just checked and update is not working with this build. You've gotta flash my system.img first tgen you can update.
Prem2628 said:
It's asking about permission while downloading cpb file by ur given link
Click to expand...
Click to collapse
Hell.....I myself need permission now... I think the owner of the file [email protected] has removed access to anyone.. Now we need permission...
Someone will have to upload it.
jackey31 said:
Hell.....I myself need permission now... I think the owner of the file [email protected] has removed access to anyone.. Now we need permission...
Someone will have to upload it.
Click to expand...
Click to collapse
you dont have the copy?
Sent from my Coolpad 8297L-I00 using XDA Premium 4 mobile app
ArjunrambZ said:
you dont have the copy?
Sent from my Coolpad 8297L-I00 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I had copied it to my drive directly but its not there any more!!!!! I have it downloaded in my hdd, will try to compress and upload soon.
jackey31 said:
I had copied it to my drive directly but its not there any more!!!!! I have it downloaded in my hdd, will try to compress and upload soon.
Click to expand...
Click to collapse
hah ok
thank you
Sent from my Coolpad 8297L-I00 using XDA Premium 4 mobile app
jackey31 said:
I had copied it to my drive directly but its not there any more!!!!! I have it downloaded in my hdd, will try to compress and upload soon.
Click to expand...
Click to collapse
did u upload the cpp?
Sent from my Coolpad 8297L-I00 using XDA Premium 4 mobile app
I have found original coolpad dazen 1 stock firmware with all tutorials this us the link
http://msggsm.com/sankar/forums/coolpad.61/
brick hogaya plz help
i tryed it dude but the coolpad assitance setup say error in checking rom and i entered into fastboot mode in my dazen but after entering in fastboot it says secure phone and stucted in that plz help sirrr...
go here.. @vrishabhverma
http://forum.xda-developers.com/showthread.php?t=3316364

Without recovery

Hello,
I need yo know what to do in my tablet because once i install the room Cyanogenmod 14 i lose my recovery and my play store.
you may can try install the root apk and twrp apk. then root your tablet and install recovery. download gapps and flash them in recovery. i did this way the olny difference is that i had the play store.
you ll find the root apk link in a tread in this forum
Por favor publica solo en inglés. Gracias..
Please post only in English, Thank you.
Sorry, thank you very much

Categories

Resources