How to boot into recovery (only if custom one is installed) - G Pad 8.3 Q&A, Help & Troubleshooting

Hello guys,
I was trying to switch rom to my gpad but I rebooted without doing the factory resets so the new rom didn't boot up.
I've figured out how to reboot into recovery, there are 3 steps:
-with the device off press vol. down button and power until LG logo comes up,
-when you see the logo you need to leave the buttons and start pressing the volume up volume down and power button for 3 seconds
-then the device will boot into the reset mode, you have to press 3 times in a row the power button and then tadaaa custom recovery here for you.
Hope it can be useful
sorry for my bad english.
Giulio:good:

Related

double power DOPO-M975 tablet. stock on recovery. pls help!!

hi
i just received this tab with password only, so the customer want it to unblock the password
i try to find the hard reset combination using volume down (-) button and power it on.
but unfortunately nothing happen and the screen now is black and i can't return it into normal mode
i thought the unit is now in recovery mode..
now the question is how to escape into recovery mode
is this unit need to flash?
thank you....
How to get into the recovery menu for the Dopo M975.
To get to the into recovery menu for the m975:
1: Hold Volume Down & Power for 10 seconds ( screen will go black ).
2: Hold Volume Up, the recovery menu should pop up after 6 to 7 seconds.
From there you will see all your options ( wipe data/factory reset is your third option ) , use Volume Up/Down to move & Power to select.

F400S Dead end

Hi,
how are u all i hope you are fine.
to start with i have root the phone by the application stump , and flash a twrp by flashiy.
the phone report and the recovery was working fine i have done the advance wipe and repot the phone.
Now its jammed on the booting with lg logo , nothing is working no download mode and no recovery .
the phone even is it loading up to do it with fast boot. i have tried everything i press all the button a Korean screen will shows tried the options repot and stuck again.
nasser789 said:
Hi,
how are u all i hope you are fine.
to start with i have root the phone by the application stump , and flash a twrp by flashiy.
the phone report and the recovery was working fine i have done the advance wipe and repot the phone.
Now its jammed on the booting with lg logo , nothing is working no download mode and no recovery .
the phone even is it loading up to do it with fast boot. i have tried everything i press all the button a Korean screen will shows tried the options repot and stuck again.
Click to expand...
Click to collapse
Shut the phone down. then remove the battery and wait 20 seconds and reinsert it. Then try to get into recovery (look here for how to http://www.android.gs/enter-recovery-mode-lg-g3/) mode and see if the phone is recognised by the computer if you connect it. Then do a data factory reset in recovery.
Turn off your phone – you can press power button once for selecting “power off” or you can press and hold the power key for about 5 or 6 seconds.
Now, press and hold Power and Volume down buttons at the same time.
When the LG logo appears, release the keys.
Immediately press Power and Volume Down buttons again until the Hard Reset menu will be displayed.
Press Power button once and confirm the hard reset operation (this will not be necessarily if your LG G3 is running on a custom recovery image).
That’s it; now your LG G3 will boot into recovery mode.
gee2012 said:
Shut the phone down. then remove the battery and wait 20 seconds and reinsert it. Then try to get into recovery (look here for how to [ mode and see if the phone is recognised by the computer if you connect it. Then do a data factory reset in recovery.
Turn off your phone – you can press power button once for selecting “power off” or you can press and hold the power key for about 5 or 6 seconds.
Now, press and hold Power and Volume down buttons at the same time.
When the LG logo appears, release the keys.
Immediately press Power and Volume Down buttons again until the Hard Reset menu will be displayed.
Press Power button once and confirm the hard reset operation (this will not be necessarily if your LG G3 is running on a custom recovery image).
That’s it; now your LG G3 will boot into recovery mode.
Click to expand...
Click to collapse
thank you very much for your response.
i tried it same problem stuck in booting the phone lg logo. i tried to put in the download mode the phone stuck on lg logo.
the only response from the phone is when i press the whole buttons and it take me to a koren menu showing imei.

LG E980 - Optimus G Pro - How to enter TWRP Recovery with hardware buttons

Hello
I used QuickBoot to enter TWRP recovery and did a complete backup.
After this, I installed an Xposed SDK ZIP and now, my phone is stuck in my Blisspop custom ROM front page.
I have powered it off, then tried the following, BUT none of these worked.
1) Volume up button + Power On button - release Power button on LG logo - Volume up button pressed alone.
2) Volume up button + Power On button - pressed all the time
3) Volume up button + Power On + Home button - Pressed all the time
4) Volume down button + Power On button - pressed all the time. - THIS makes the screen go black after LG logo, so I am suspecting it doesn't boot into recovery? Then how did Quickboot help?
Can someone tell me exactly how to enter TWRP recovery again using hardware buttons? Please, this is urgent.
Fixed
Fixed using this procedure. Hope it helps someone else;
1) Press Volume Up button + Power On button for 7 seconds until you see the LG logo the first time.
2) Quickly release both buttons after you see the LG logo DISAPPEAR - i.e. black screen.
3) When the LG logo appears again, keep pressing the Volume Up button.
This is how you enter TWRP recovery.

[solved] Stuck on boot loader warning screen

Hy,
I'm stuck on boot loader unlock warning (from google) screen after a restart.
It's written "press power key ti pause boot".
I tried to press and wait few minutes, several tile and nothing happen.
How can I get the phone boot ?
Hold down power button + vol up + vol down. Then let go of power button only once the device boots up. This should take you into fastboot. Fix the device. Reboot to OS.
:good:
Thank's a lot.
I have tried several combinaison but not the 3 button at the same time.

How to reliably start TWRP

I have TWRP installed, and have managed to run it a few times. Now I cannot start TWRP at all.
From off, if I switch on, the following happens:
1) Screen with Samsung Galaxy A70 - Secured by Knox
2) 0.5 seconds later another screen, "this phone's bootloader is unlocked and it software integrity. .." and "press power key to continue..."
3) 5 seconds later, same screen as (1)
4) 3 seconds later, red letters "this phone is not running Samsung's official software"
5) 3 seconds later blank screen with "samsung" and then booting to android.
In my experience I have to flash twrp every time I want to use it( I don't know the reason but I couldn't fix it ) , for booting twrp on the other hand I turn off the phone first, then I press power button+volume down until the "this phones bootloader..." screen appears, here is the tricky part, you have to quickly let go of these two buttons, press power button, let go of the power button (after the warning disappeared) and then press volume down button (and hold it) until twrp logo appears, this happens really fast so you may need to do it a few times to get used to it.
mobin22 said:
In my experience I have to flash twrp every time I want to use it( I don't know the reason but I couldn't fix it )
Click to expand...
Click to collapse
Yes, same here, the only time I have managed to run TWRP on this phone, is right after a flash.
mobin22 said:
and then press power down button
Click to expand...
Click to collapse
Do you mean volume down?
Zilliman said:
Yes, same here, the only time I have managed to run TWRP on this phone, is right after a flash.
Do you mean volume down?
Click to expand...
Click to collapse
Power off the device, plug into a pc, wait for it to start charge, hold vol up and power till it turns on. Wala boots to twrp. If you have magisk installed,you can use the reboot option within magisk.
mobin22 said:
In my experience I have to flash twrp every time I want to use it( I don't know the reason but I couldn't fix it ) , for booting twrp on the other hand I turn off the phone first, then I press power button+volume down until the "this phones bootloader..." screen appears, here is the tricky part, you have to quickly let go of these two buttons, press power button, let go of the power button (after the warning disappeared) and then press volume down button (and hold it) until twrp logo appears, this happens really fast so you may need to do it a few times to get used to it.
Click to expand...
Click to collapse
Samsung changed how to enter recovery on Android 11. Power off device, plug into pc, wait for it to charge, then hold vol up and power till it turns on. Alternatively, if you have magisk installed, use the reboot options within magisk.
I did that. Thanks!
But it has gone to:
Android Recovery
Samsung /a70qxx/a70q
11/RP1A.200720.012./A705FNXXUB5DVB3
user/release-keys
Use volume up/down and power.
Reboot system now
Reboot to bootloader
Apply update from ADB
Apply update from SD card
Wipe date/factory reset
...
...
...
Where is TWRP? It seems it's gone.
Zilliman said:
I did that. Thanks!
But it has gone to:
Android Recovery
Samsung /a70qxx/a70q
11/RP1A.200720.012./A705FNXXUB5DVB3
user/release-keys
Use volume up/down and power.
Reboot system now
Reboot to bootloader
Apply update from ADB
Apply update from SD card
Wipe date/factory reset
...
...
...
Where is TWRP? It seems it's gone.
Click to expand...
Click to collapse
That's because you're not installing it properly go back to my guide and follow it exactly and stop listening to these other people. I've been modding this device since it first came out with Android 9, I know every inch of this device. You're getting confused by what other people are telling you
MarvinMod said:
5- Press and hold vol down and power till the screen turns blank then immediately press and hold vol up. The device will reboot then land you in the twrp splash screen
Click to expand...
Click to collapse
It fails here, on this step. After successful flash of recovery.tar, power + vol down to reboot, cable still connected, nothing you can do now can bring TWRP up. The phone boots into Android.
EDIT: I think I have now got it. I will update in a few mins.
Zilliman said:
It fails here, on this step. After successful flash of recovery.tar, power + vol down to reboot, cable still connected, nothing you can do now can bring TWRP up. The phone boots into Android.
EDIT: I think I have now got it. I will update in a few mins.
Click to expand...
Click to collapse
After successful flash of recovery.tar, power and vol down to reboot, as soon as the phone screen goes blank, immediately release all keys and press and hold vol up. Must be as soon as screen goes blank. The device will then reboot twice and land you in twrp splash screen. You must hit vol down and power after successful flash then when screen blanks, vol up. If you miss this step, twrp will not hold and revert back to stock recovery.
Here is the notes I made today:
****************************************************************
INSTALL + START TWRP
phone is off
press up + dn
insert cable
go into download (press up)
ODIN 3.14 + AP:tar(vbmeta.img+twrp.img), auto reboot off, press upload
when it succeeds, press dn + pwr until it reboots
then quickly up + pwr until it starts (no need to hold down)
this starts in TWRP
from powered off
press pwr button
goes into twrp or android(system) -- depending on what was used last time
if we used reboot->system last time it will now **Always** go into system!
to go back into twrp:
switch off
power cable until charge
pwr + up until it starts
****************************************************************
The above means that you CANNOT go back to TWRP unless you have a cable and a PC near by.

Categories

Resources