Related
okay i have a huge question about this... PLease Share YOUR Thoughts and experiences TOoOO!
we are using custom kernels right? but sometimes the developer/creator of the kernel doesnt mention on what recommended usage of the main profile and profile..
so i decided to put some description about this governs that i have gathered around in XDA FORUM so we can share our knowledge on this GOverns.
okay first.. i found this..
smartass governor - is based on the concept of the interactive governor.
I have always agreed that in theory the way interactive works - by taking over the idle loop - is very attractive. I have never managed to tweak it so it would behave decently in real life. Smartass is a complete rewrite of the code plus more. I think its a success. Performance is on par with the "old" minmax and I think smartass is a bit more responsive. Battery life is hard to quantify precisely but it does spend much more time at the lower frequencies.
Smartass will also cap the max frequency when sleeping to 352Mhz (or if your min frequency is higher than 352 - why?! - it will cap it to your min frequency). Lets take for example the 528/176 kernel, it will sleep at 352/176. No need for sleep profiles any more.
ondemand
Available in most kernels, and the default governor in most kernels. When the CPU load reaches a certain point (see "up threshold" in Advanced Settings), ondemand will rapidly scale the CPU up to meet demand, then gradually scale the CPU down when it isn't needed. - SetCPU website
conservative
Available in some kernels. It is similar to the ondemand governor, but will scale the CPU up more gradually to better fit demand. Conservative provides a less responsive experience than ondemand, but can save battery. - SetCPU website
performance
Available in most kernels. It will keep the CPU running at the "max" set value at all times. This is a bit more efficient than simply setting "max" and "min" to the same value and using ondemand because the system will not waste resources scanning for the CPU load. This governor is recommended for stable benchmarking. - SetCPU website
powersave
Available in some kernels. It will keep the CPU running at the "min" set value at all times. - SetCPU website
userspace
A method for controlling the CPU speed that isn't currently used by SetCPU. For best results, do not use the userspace governor. - SetCPU website
interactive
Advantages:
+ significantly more responsive to ramp cpu up when required (UI interaction)
+ more consistent ramping, existing governors do their cpu load sampling in a workqueue context, the 'interactive' governor does this in a timer context, which gives more consistent cpu load sampling.
+ higher priority for cpu frequency increase, rt_workqueue is used for scaling up, giving the remaining tasks the cpu performance benefit, unlike existing governors which schedule rampup work to occur after your performance starved tasks have completed.
SOURCES:
http://forum.xda-developers.com/showthread.php?t=969477
https://github.com/CyanogenMod/cm-kernel/commit/255f13bf41f368aa51638a854ed69cfc60f39120
Nice thread. I am new to this stuff (I learned just yesterday what governors are) and all this will be very usefull for people like me. Thanx.
In the SetCPU app, if you press About and then click the link you can get all this info there too
So Guys,
Im using Buzz 1.3.5 kernel at 1.2 Ghz (1.6 Ghz max), with ARHD rom.
What the best processor type to battery life \ performance ?
Any kind of values to screen of and temp > 50º or 40º ?
Thank you , lets share our configurations and post results !
so how do we get smartass? Im currently trying out interactive.
So guys, no one can put here some configurations?
Like, screen off values, > 50º temp, and others ?
Come on, share pls..
RM KERNEL
Just a statement regarding kernel source: The Kernel Source is of course covered under GPL version 2. Free software does NOT mean no work or time was spent working on it. I have donated a large sum of my free time to hack this kernel. If you use my modified kernel source in parts or in its entirety, I kindly ask you mention its origins and to send me a github pull request or PM whenever you find bugs or think you can help improve my kernel hack further. This way the entire community will truly benefit from the spirit of open source. Thank you
Rm -Kernel For Optimus me (pecan)
What is a Kernel?
The Kernel is the Foundation in which everything else builds upon in any software system.
NOTICE: This Kernel Only COMPATIBLE with Mine and Pax0r CM7.2 AND there Based Roms cooked roms.
Don't try to flash on stock roms or older cm7 or omgb/omfgb or cm9 roms becuase is not COMPATIBLE now with this roms
Please DO NOT use any task killers, they DO NOT improve performance nor battery life. They INTERFERE with your phone's stability (more crashes) and App compatibilities (Forced Close).
IMPORTANT NOTES
Click to expand...
Click to collapse
No Guarantees! If it kills your grandmother or your device ,I'm not responsible if
you brick your device by heavy OC, flashing, voiding your warranty,or any other pain or suffering you may feel as result of using this kernel!!! ...
Using using very high frequencies (OVER 806Mhz) is dangerous for your phone.
if you oc your phone OVER 806MHZ on my kernel then no support provided
(If you download, please hit Thanks below my post! Thank you!)
NOTE: after wipe battery,system recreate the battery stats, forcing the battery to lose its capacity, i advice you recalibrate the battery after doing that.
KNOW BUGS
Click to expand...
Click to collapse
Not All CHIPS ARE CREATED EQUAL
Download:
No Guarantees! If it kills your grandmother or your device, I am NOT responsible! If you understand this:
(If you download, please hit Thanks below my post! Thank you!)
*RC12* [STABLE] Click me
Old Downloads: Click Me
INSTALL
Click to expand...
Click to collapse
How to Flash/Install the Kernel
Root Your LG Optimus Me , Then Install Custom Recovery
Download Newer Version Of Rm 32 Kernel From Topic
Copy Zip File to Sd Card
Reboot Your Phone To Recovery Mode
Wipe Cache,Wipe Dalvik Cache And Battery
Now Install Kernel And Enjoy:laugh:
Note: After FLASHING, the first reboot may take longer than usual, please be patient... After the first reboot, it may lag during initial load (let everything finish loading). Once everything is loaded and phone is ready for use, reboot the phone a 2nd time and the lag will be gone and everything should be silky smooth...
SOURCE
Click to expand...
Click to collapse
I respect the GPL (the license covering the Linux kernel), so all the up-to-date source code for this kernel is avaiable on my github:https://github.com/kerneldevs/RM-32-kernel-pecan
My kernel is, in turn, based on the publicly-avaiable froyo kernel source from LG. You're free to fork, modify, and re-release the code as your own, but you must provide the source code for your resulting work. Doing so ensures you honor the terms of the license, but you're also giving back to the community. Basically, don't be a ****.
THANKS TO
Click to expand...
Click to collapse
drapalyuk- initial setup of pecan kernel source and for biggest work for this device
pax0r- 2nd setup of pecan kernel source and also for biggest work for this device
codeaurora forum - source and patches
Mik9-SOME PATCHES THAT I USED IN MY KERNEL
Fserve-for sharing his kernel source from his source i got some idea for this kernel
Andy572-used some patches
Tasssadar-for his kernel source based on mik9 kernel
Roqu3-for his kernel source for p350, i got a 1 fix from his source
Cyanogenmod - for sharing their kernel source code, used some 1 patches from cm kernel source.
burstlam- got i nice idea about kgsl from his zte blade source
SUPPORT
Click to expand...
Click to collapse
IF YOU LIKE MY WORK YOU CAN USE DONATE BUTTON TO SUPPORT MY WORK OR YOU CAN PRESS THANKS BUTTON TO SHOW YOUR SUPPORT .
SOME INFO OF SOME KERNEL THINGS
Click to expand...
Click to collapse
CleanCache(via ZCache backend)
ZCACHE is a compressed cache similar to ZRAM but the similarity ends there. ZCache is meant to provide as many "cleancache" pages (non-dirty or untouched "virgin" memory) to apps that request for new memory. CleanCache is very easy to allocate and no additional penalty are required to hand them out, so having more CleanCache pages will improve performance. Under heavy memory pressure, often times the kernel will NOT have enough CleanCache pages, so the kernel has to do EXTRA work to reclaim dirty cache pages and clean them for the new apps that's requesting for them. The described process creates a performance hit for the kernel and the app, so the idea is to use compression to create more CleanCache pages available for use. Of course there's a penalty to pay for using compression, but the trade-off between compression penalty and the penalty for reclaiming dirty cache pages and allocating them after cleaning is smaller for compression, so in the end, CleanCache should add more performance.
USER experience BENCHMARK ARE MOVED TO THIS LINK
MORE
Click to expand...
Click to collapse
WANT FAST NEWS ABOUT MY WORK? THEN JOIN MY FACEBOOK GROUP : https://www.facebook.com/groups/OADPROM/
If you want to donate some bucks for the work that i'm doing for LG Optimus Me, go to the my username and hit the 'donate to me' button. Otherwise I would be grateful if you can click the "Thanks" button on the bottom right of this post.
THANKS TO ALL
CHANGELOG
CHANGELOG
OLD CHANGELOG OF RM VERSIONS ARE MOVED CLICK HERE TO SEE OLD CHANGELOG
09-07-2012 RC7 http://www.mediafire.com/?sxh8wt2u1b9493t
serial: msm_serial_hs_lite: Use pm_runtime to indicate device state
mm: Make memory hotplug aware of memmap holes
mfd: Use min_uV for voltage setting
msm: timer: read clocksource from global clock variable.
msm_bus: APIs for MSM bus scaling.
arm: add ARM-specific memory low-power support
msm: rmnet: Add tailroom for sk buffer to be transmitted
msm: Add Timpani Sound Device Profile
14-07-2012 RC8 http://www.mediafire.com/?ld6lrnbxrghdewb
msm: camera: Support for Dynamic Camera Logging
add backlight driver in st1.5
msm: mfd: Use debugfs interface to allow timpani codec register access
spi_qsd: Modify timeout mechanism to check SPI state valid bit.
Define and process new type of memory tag (ATAG_MEM_RESERVED)
msm: Add XO aggregation and voting API stubs
Add tpmd_dev from the tpm-emulator source to the kernel
arm: common: CP register access tool for Read/Write to CP registers
serial: msm_serial_hs: Use runtime PM for HSUART power state transitions
21-07-2012 RC10 http://www.mediafire.com/?97g5pqr71xuuj9h
rcu: "Tiny RCU", The Bloatwatch Edition
fs: simple fsync race fix
Increase readahead value
acpuclock tweaks
axi oc back
add the Stochastic Fair Blue (SFB) network scheduler - from zachariasmaladroit
sched: Fix over-scheduling bug [author andy572]
block: introduce the BFQ I/O scheduler
block: Fix atomic functions in bfq & update bfq to v2
msm_kgsl: Fix corner cases while adding ringbuffer commands
msm_kgsl: Take the driver lock after waiting for wakeup to complete
msm_kgsl: enable writecombine
msm: 7x27: Update the SDC2 GPIO disable configs
msm: 7x27: mmc: Add platform data for dummy CMD52
usb: msm_gadget: Check both USB state and VBUS during initialization
and some more small changes, check github repo for that
25-07-2012 RC11 http://www.mediafire.com/?3l6fi81l4no860t
mmc: msm_sdcc: Enhance the current mechanism of simulating PIO interrupt
msm: socinfo: move sysdev creation outside init
fs: mark_inode_dirty barrier fix
vmalloc: remove redundant unlikely()
mm: remove likely() from mapping_unevictable()
mm: remove likely() from grab_cache_page_write_begin()
writeback: avoid unnecessary determine_dirtyable_memory call
brk: fix min_brk lower bound computation for COMPAT_BRK
mm/dmapool.c: take lock only once in dma_pool_free()
mm/dmapool.c: use TASK_UNINTERRUPTIBLE in dma_pool_alloc()
fs/select.c: fix information leak to userspace
PM: Lock PM device list mutex in show_dev_hash()
PM: Prototype the pm_generic_ operations
mmc: Attribute the IO wait time properly in mmc_wait_for_req().
Wifi fix
Last version of RM Kernel
09-08-2012 RC12 http://www.mediafire.com/?j6e21kzhdhw3x3v
revert axi oc back
revert update acpuclock
netlink: Make nlmsg_find_attr take a const nlmsghdr*.
netfilter/nf_conntrack_netlink: fix ctnetlink_parse_tuple()
net/ethernet/eth: remove deprecated: print_mac() [Marin Mitov]
ipv4/netfilter/nf_nat_standalone: workaround to make -Wswitch happy
ipv6/xfrm6_tunnel: missing middle operand
fs/ext4/move_extent: fix uninitialized start_ext.ee_block [tytso]
cpufreq: fix memory leak in cpufreq_add_dev [Xiaotian Feng]
cgroup: introduce cancel_attach() [Daisuke Nishimura]
block: rescan partitions on invalidated devices on -ENOMEDIA too
block: add proper state guards to __elv_next_request
mtd: mtdconcat: fix NAND OOB write
HERE THE INFO OF ANDROID GOV
ALL CREDITS GO TO Deedii
Android CPU governors explained
1: OnDemand
2: OndemandX
3: Performance
4: Powersave
5: Conservative
6: Userspace
7: Min Max
8: Interactive
9: InteractiveX
10: Smartass
11: SmartassV2
12: Scary
13: Lagfree
14: Smoothass
15: Brazilianwax
16: SavagedZen
17: Lazy
18: Lionheart
19: LionheartX
20: Intellidemand
21: Hotplug
1: OnDemand Governor:
This governor has a hair trigger for boosting clockspeed to the maximum speed set by the user. If the CPU load placed by the user abates, the OnDemand governor will slowly step back down through the kernel's frequency steppings until it settles at the lowest possible frequency, or the user executes another task to demand a ramp.
OnDemand has excellent interface fluidity because of its high-frequency bias, but it can also have a relatively negative effect on battery life versus other governors. OnDemand is commonly chosen by smartphone manufacturers because it is well-tested, reliable, and virtually guarantees the smoothest possible performance for the phone. This is so because users are vastly more likely to ***** about performance than they are the few hours of extra battery life another governor could have granted them.
This final fact is important to know before you read about the Interactive governor: OnDemand scales its clockspeed in a work queue context. In other words, once the task that triggered the clockspeed ramp is finished, OnDemand will attempt to move the clockspeed back to minimum. If the user executes another task that triggers OnDemand's ramp, the clockspeed will bounce from minimum to maximum. This can happen especially frequently if the user is multi-tasking. This, too, has negative implications for battery life.2: OndemandX:
Basically an ondemand with suspend/wake profiles. This governor is supposed to be a battery friendly ondemand. When screen is off, max frequency is capped at 500 mhz. Even though ondemand is the default governor in many kernel and is considered safe/stable, the support for ondemand/ondemandX depends on CPU capability to do fast frequency switching which are very low latency frequency transitions. I have read somewhere that the performance of ondemand/ondemandx were significantly varying for different i/o schedulers. This is not true for most of the other governors. I personally feel ondemand/ondemandx goes best with SIO I/O scheduler.
3: Performance Governor:
This locks the phone's CPU at maximum frequency. While this may sound like an ugly idea, there is growing evidence to suggest that running a phone at its maximum frequency at all times will allow a faster race-to-idle. Race-to-idle is the process by which a phone completes a given task, such as syncing email, and returns the CPU to the extremely efficient low-power state. This still requires extensive testing, and a kernel that properly implements a given CPU's C-states (low power states).4: Powersave Governor:
The opposite of the Performance governor, the Powersave governor locks the CPU frequency at the lowest frequency set by the user.
5:Conservative Governor:
This biases the phone to prefer the lowest possible clockspeed as often as possible. In other words, a larger and more persistent load must be placed on the CPU before the conservative governor will be prompted to raise the CPU clockspeed. Depending on how the developer has implemented this governor, and the minimum clockspeed chosen by the user, the conservative governor can introduce choppy performance. On the other hand, it can be good for battery life.
The Conservative Governor is also frequently described as a "slow OnDemand," if that helps to give you a more complete picture of its functionality.6: Userspace Governor:
This governor, exceptionally rare for the world of mobile devices, allows any program executed by the user to set the CPU's operating frequency. This governor is more common amongst servers or desktop PCs where an application (like a power profile app) needs privileges to set the CPU clockspeed.
7: Min Max
well this governor makes use of only min & maximum frequency based on workload... no intermediate frequencies are used.8: Interactive Governor:
Much like the OnDemand governor, the Interactive governor dynamically scales CPU clockspeed in response to the workload placed on the CPU by the user. This is where the similarities end. Interactive is significantly more responsive than OnDemand, because it's faster at scaling to maximum frequency.
Unlike OnDemand, which you'll recall scales clockspeed in the context of a work queue, Interactive scales the clockspeed over the course of a timer set arbitrarily by the kernel developer. In other words, if an application demands a ramp to maximum clockspeed (by placing 100% load on the CPU), a user can execute another task before the governor starts reducing CPU frequency. This can eliminate the frequency bouncing discussed in the OnDemand section. Because of this timer, Interactive is also better prepared to utilize intermediate clockspeeds that fall between the minimum and maximum CPU frequencies. This is another pro-battery life benefit of Interactive.
However, because Interactive is permitted to spend more time at maximum frequency than OnDemand (for device performance reasons), the battery-saving benefits discussed above are effectively negated. Long story short, Interactive offers better performance than OnDemand (some say the best performance of any governor) and negligibly different battery life.
Interactive also makes the assumption that a user turning the screen on will shortly be followed by the user interacting with some application on their device. Because of this, screen on triggers a ramp to maximum clockspeed, followed by the timer behavior described above.9: InteractiveX Governor:
Created by kernel developer "Imoseyon," the InteractiveX governor is based heavily on the Interactive governor, enhanced with tuned timer parameters to better balance battery vs. performance. The InteractiveX governor's defining feature, however, is that it locks the CPU frequency to the user's lowest defined speed when the screen is off.10: Smartass
Is based on the concept of the interactive governor.
I have always agreed that in theory the way interactive works – by taking over the idle loop – is very attractive. I have never managed to tweak it so it would behave decently in real life. Smartass is a complete rewrite of the code plus more. I think its a success. Performance is on par with the “old” minmax and I think smartass is a bit more responsive. Battery life is hard to quantify precisely but it does spend much more time at the lower frequencies.
Smartass will also cap the max frequency when sleeping to 352Mhz (or if your min frequency is higher than 352 – why?! – it will cap it to your min frequency). Lets take for example the 528/176 kernel, it will sleep at 352/176. No need for sleep profiles any more!"11: SmartassV2:
Version 2 of the original smartass governor from Erasmux. Another favorite for many a people. The governor aim for an "ideal frequency", and ramp up more aggressively towards this freq and less aggressive after. It uses different ideal frequencies for screen on and screen off, namely awake_ideal_freq and sleep_ideal_freq. This governor scales down CPU very fast (to hit sleep_ideal_freq soon) while screen is off and scales up rapidly to awake_ideal_freq (500 mhz for GS2 by default) when screen is on. There's no upper limit for frequency while screen is off (unlike Smartass). So the entire frequency range is available for the governor to use during screen-on and screen-off state. The motto of this governor is a balance between performance and battery.12: Scary
A new governor wrote based on conservative with some smartass features, it scales accordingly to conservatives laws. So it will start from the bottom, take a load sample, if it's above the upthreshold, ramp up only one speed at a time, and ramp down one at a time. It will automatically cap the off screen speeds to 245Mhz, and if your min freq is higher than 245mhz, it will reset the min to 120mhz while screen is off and restore it upon screen awakening, and still scale accordingly to conservatives laws. So it spends most of its time at lower frequencies. The goal of this is to get the best battery life with decent performance. It will give the same performance as conservative right now, it will get tweaked over time.13: Lagfree:
Lagfree is similar to ondemand. Main difference is it's optimization to become more battery friendly. Frequency is gracefully decreased and increased, unlike ondemand which jumps to 100% too often. Lagfree does not skip any frequency step while scaling up or down. Remember that if there's a requirement for sudden burst of power, lagfree can not satisfy that since it has to raise cpu through each higher frequency step from current. Some users report that video playback using lagfree stutters a little.14: Smoothass:
The same as the Smartass “governor” But MUCH more aggressive & across the board this one has a better battery life that is about a third better than stock KERNEL15: Brazilianwax:
Similar to smartassV2. More aggressive ramping, so more performance, less battery16: SavagedZen:
Another smartassV2 based governor. Achieves good balance between performance & battery as compared to brazilianwax.17: Lazy:
This governor from Ezekeel is basically an ondemand with an additional parameter min_time_state to specify the minimum time CPU stays on a frequency before scaling up/down. The Idea here is to eliminate any instabilities caused by fast frequency switching by ondemand. Lazy governor polls more often than ondemand, but changes frequency only after completing min_time_state on a step overriding sampling interval. Lazy also has a screenoff_maxfreq parameter which when enabled will cause the governor to always select the maximum frequency while the screen is off.18: Lionheart:
Lionheart is a conservative-based governor which is based on samsung's update3 source.
The tunables (such as the thresholds and sampling rate) were changed so the governor behaves more like the performance one, at the cost of battery as the scaling is very aggressive.19: LionheartX
LionheartX is based on Lionheart but has a few changes on the tunables and features a suspend profile based on Smartass governor.20: Intellidemand:
Intellidemand aka Intelligent Ondemand from Faux is yet another governor that's based on ondemand. Unlike what some users believe, this governor is not the replacement for OC Daemon (Having different governors for sleep and awake). The original intellidemand behaves differently according to GPU usage. When GPU is really busy (gaming, maps, benchmarking, etc) intellidemand behaves like ondemand. When GPU is 'idling' (or moderately busy), intellidemand limits max frequency to a step depending on frequencies available in your device/kernel for saving battery. This is called browsing mode. We can see some 'traces' of interactive governor here. Frequency scale-up decision is made based on idling time of CPU. Lower idling time (<20%) causes CPU to scale-up from current frequency. Frequency scale-down happens at steps=5% of max frequency. (This parameter is tunable only in conservative, among the popular governors)
To sum up, this is an intelligent ondemand that enters browsing mode to limit max frequency when GPU is idling, and (exits browsing mode) behaves like ondemand when GPU is busy; to deliver performance for gaming and such. Intellidemand does not jump to highest frequency when screen is off.
21: Hotplug Governor:
The Hotplug governor performs very similarly to the OnDemand governor, with the added benefit of being more precise about how it steps down through the kernel's frequency table as the governor measures the user's CPU load. However, the Hotplug governor's defining feature is its ability to turn unused CPU cores off during periods of low CPU utilization. This is known as "hotplugging."
Obviously, this governor is only available on multi-core devices.
=============================================
ALL CREDITS GO TO THE USERS OF XDA WHO CREATED DIFF THREADS ABOUT I/O, THIS I/O INFO FROM ALL THREADS
ALL INFO ABOUT I/O
Click to expand...
Click to collapse
I/O:- short form of Input & OutputI/O Scheduler:- Input/output (I/O) scheduling is a term used to describe the method computer operating systems decide the order that block I/O operations will be submitted to storage volumes. I/O Scheduling is sometimes called 'disk scheduling'.
I/O schedulers can have many purposes depending on the goal of the I/O scheduler, some common goals are:
- To minimize time wasted by hard disk seeks.
- To prioritize a certain processes' I/O requests.
- To give a share of the disk bandwidth to each running process.
- To guarantee that certain requests will be issued before a particular deadline.Info on I/O Scheduler
SIO:- cheduler is based on the deadline scheduler but it's more like a mix between no-op and deadline.In other words, SIO is like a lighter version of deadline but it doesn't do any kind of sorting, so it's aimed mainly for random-access devices (like SSD hard disks) where request sorting is no needed (as any sector can be accesed in a constant time, regardless of its physical location).NOOP:- The NOOP scheduler inserts all incoming I/O requests into a simple, unordered FIFO queue and implements request merging.
The scheduler assumes I/O performance optimization will be handled at some other layer of the I/O hierarchy; e.g., at the block device; by an intelligent HBA such as a Serial Attached SCSI (SAS) RAID controller or by an externally attached controller such as a storage subsystem accessed through a switched Storage Area Network.ANTICIPATORY:- Anticipatory scheduling is an algorithm for scheduling hard disk input/output.
It seeks to increase the efficiency of disk utilization by "anticipating" synchronous read operations.
ADAPTIVE ANTICIPATORY SCHEDULER:- For the anticipatory scheduler, we scale up the anticipation timeout (antic expire) using the latency scaling factor over time. When the virtual disk latencies are low a small scaling of the timeout is sucient to prevent deceptive idleness, whereas when the latencies are high a larger scaling of the timeout value may be required to achieve the same. Note that such dynamic setting of the timeout value ensures that we attain a good trade-o between throughput (lost due to idling) and deceptive idleness mitigation. Setting a high value for the scaling factor (increasing idling time) only happens when the disk service latencies themselves are higher. This may not necessarily cause a signicant loss in throughput, because submitting a request from another process instead of idling is not going to improve throughput if the virtual disk itself does not get any faster than it is at the current period. A higher anticipation timeout might also be capable of absorbing process scheduling eects inside the VM. The results for the adaptive anticipatory scheduler are shown in Figure 2. The read time with our modied implementation (third bar in the dierent scheduler combi- nations) shows that it is possible to mitigate the eects of deceptive idleness by adapting the timeout. An interesting related observation is that the level to which the improve- ment is possible varies for dierent Domain-0 schedulers; noop - 39%, anticipatory - 67% and cfq - 36%. This again points to the fact that the I/O scheduler used in Domain-0 is important for the VM's ability in enforcing I/O scheduling guarantees. Dierent Domain-0 I/O schedulers likely have a dierent service latency footprint inside the VMs, contributing to dierent levels of improvement.CFQ:-CFQ, also known as "Completely Fair Queuing", is an I/O scheduler for the
Linux kernel which was written in 2003 by Jens Axboe.
CFQ works by placing synchronous requests submitted by processes into a number of per-process queues and then allocating timeslices for each of the queues to access the disk. The length of the time slice and the number of requests a queue is allowed to submit depends on the IO priority of the given process. Asynchronous requests for all processes are batched together in fewer queues, one per priority.DEADLINE:- The goal of the Deadline scheduler is to attempt to guarantee a start service time for a request. It does that by imposing a deadline on all I/O operations to prevent starvation of requests. It also maintains two deadline queues, in addition to the sorted queues (both read and write). Deadline queues are basically sorted by their deadline (the expiration time), while the sorted queues are sorted by the sector number.
Before serving the next request, the Deadline scheduler decides which queue to use. Read queues are given a higher priority, because processes usually block on read operations. Next, the Deadline scheduler checks if the first request in the deadline queue has expired. Otherwise, the scheduler serves a batch of requests from the sorted queue. In both cases, the scheduler also serves a batch of requests following the chosen request in the sorted queue.V(R):- The next request is decided based on its distance from the last request, with a multiplicative penalty of `rev_penalty' applied for reversing the head direction. A rev_penalty of 1 means SSTF behaviour. As this variable is increased, the algorithm approaches pure SCAN. Setting rev_penalty to 0 forces SCAN.
SIMPLE:- Does not do any kind of sorting, as it is aimed foraleatory access devices, but it does some basic merging. We try to keep minimum overhead to achieve low latency.BFQ:- BFQ is a proportional share disk scheduling algorithm based on the slice-by-slice service scheme of CFQ. But BFQ assigns budgets, measured in number of sectors, to tasks instead of time slices. The disk is not granted to the active task for a given time slice, but until it has exahusted its assigned budget. This change from the time to the service domain allows BFQ to distribute the disk bandwidth among tasks as desired, without any distortion due to ZBR, workload fluctuations or other factors. BFQ uses an ad hoc internal scheduler, called B-WF2Q+, to schedule tasks according to their budgets. Thanks to this accurate scheduler, BFQ can afford to assign high budgets to disk-bound non-seeky tasks (to boost the throughput), and yet guarantee low latencies to interactive and soft real-time applications.
cips gokhle said:
Welcome to my RM kernel thread
About
THIS KERNEL IS BASED ON PECAN KERNEL .
RM KERNEL IS a very optimized kernel for 2.3 ROMS (in 2.2 you will face problem). i made this kernel to push performance as hard as it can.
Features & Changelog
Installation
Reboot intro recovery
Flash the latest kernel
Reboot
Enjoy
NOTE: THIS KERNEL IS ONLY FOR MY CM NIGHTLY AND PAX0R CM7.2 ROMS. DON'T FLASH ON VIVEK CM7.2,OMFGB,OMGB AND CM7.1 AND 2.2 ROMS. (FOR CM7.1,OMFGB,OMGB AND VIVEK CM7.2 I'M MAKING ANOTHER VERSION)
Downloads
V1000: http://www.mediafire.com/?aw3t3jrz99151zy
Click to expand...
Click to collapse
Goodjob bro
I will try
cooler1182 said:
Goodjob bro
I will try
Click to expand...
Click to collapse
i'm waiting for your review
I not absolutely well understand what changes installation of this kernel will make.
zizka said:
I not absolutely well understand what changes installation of this kernel will make.
Click to expand...
Click to collapse
this kernel will improve your touch screen and improve your phone performance
but about touch screen it's best work with my nightly
I made backup of data and established your kernel. Phone surprisingly quickly is loaded. Programs on a memory card need time that they could be used. Touch works also well as before. Changes didn't see. There can be I blind put on Nightly9
zizka said:
I made backup of data and established your kernel. Phone surprisingly quickly is loaded. Programs on a memory card need time that they could be used. Touch works also well as before. Changes didn't see. There can be I blind put on Nightly9
Click to expand...
Click to collapse
hmm in fb group 1 tested this and it's work for him any way in nightly 10 have update version of this kernel 2.6.32.59
now, I can mount the SD-ext with link2sd. In Fruit Ninja you feel the difference, is faster and more responsive than ever
I dont see changes. Multitouch have bug axis inversion and performance no changes for me. Thxs!
THIS KERNEL IS NOW OBSOLETE, DON'T USE IT.
newest and stable kernel releases are now integrated into my version of CYANOGENMOD 7.2
cn u just upload to some other site?? mediafire isnt working! m not able to download
ethan1234 said:
cn u just upload to some other site?? mediafire isnt working! m not able to download
Click to expand...
Click to collapse
SEE THIS
http://forum.xda-developers.com/showpost.php?p=25967572&postcount=12
Guys project restarted take test guys
this kernel is better than .35?
agen47 said:
this kernel is better than .35?
Click to expand...
Click to collapse
yes it's better it have new things that 1st time for p350
i tried both versions of this kernel and both worked well cant really tell the performance difference in vsync off, maybe in some heavy games a few more fps. atm im using vsync on on kang2 running at 806mhz no kernel panic yet
agen47 said:
i tried both versions of this kernel and both worked well cant really tell the performance difference in vsync off, maybe in some heavy games a few more fps. atm im using vsync on on kang2 running at 806mhz no kernel panic yet
Click to expand...
Click to collapse
you will be only feel diff in games on vsync off
here's the basic description about vsync:
vsync off = great for benchmarks but crap in real life.
vsync on = crap for benchmarks great in real life.
Say your screen refreshes at 60Hz - Vsync on will attempt to display 30fps to avoid tearing. 30 goes into 60 twice evenly... get it?
Vsync off will display as many fps as possible. So rather than holding back and displaying 30fps it will allow 35fps. This will cause tearing because 35 does not go into 60 evenly.
It's the same affect you get when playing video games on a PC.
Found this in EVO 4G section, thought I would share.
CPU Governors explained
Thanks to deedii for posting this in another forum:
http://forum.xda-developers.com/show...65&postcount=2
Android CPU governors explained
What is a governor?
A governor is a driver for the regulation of CPUFreq - CPU frequency. As the name suggests, we, the Governor of the decision, when at full capacity, the MaxFreq - will be achieved or how fast the minFreq - - maximum frequency is reached minimum frequency or center frequency. He decides when, how and how long the CPU and still responds battery saving is still soft and still works.
There are many types of governors. Some are for single-core processors and some designed for dual-core processors. In stock kernel, there are five governors and quasar kernel, there are a lot more.
1: OnDemand
2: OndemandX
3: Performance
4: Powersave
5: Conservative
6: Userspace
7: Min Max
8: Interactive
9: InteractiveX
10: Smartass
11: SmartassV2
12: Scary
13: Lagfree
14: Smoothass
15: Brazilianwax
16: SavagedZen
17: Lazy
18: Lionheart
19: LionheartX
20: Intellidemand
21: Hotplug
22: Wheatley
23: Lulzactive
24: AbyssPlug
25. BadAss
26. Ktoonservative
27. AssWax
28. Sleepy
29. Hyper
1: OnDemand Governor:
This governor has a hair trigger for boosting clockspeed to the maximum speed set by the user. If the CPU load placed by the user abates, the OnDemand governor will slowly step back down through the kernel's frequency steppings until it settles at the lowest possible frequency, or the user executes another task to demand a ramp.
OnDemand has excellent interface fluidity because of its high-frequency bias, but it can also have a relatively negative effect on battery life versus other governors. OnDemand is commonly chosen by smartphone manufacturers because it is well-tested, reliable, and virtually guarantees the smoothest possible performance for the phone. This is so because users are vastly more likely to ***** about performance than they are the few hours of extra battery life another governor could have granted them.
This final fact is important to know before you read about the Interactive governor: OnDemand scales its clockspeed in a work queue context. In other words, once the task that triggered the clockspeed ramp is finished, OnDemand will attempt to move the clockspeed back to minimum. If the user executes another task that triggers OnDemand's ramp, the clockspeed will bounce from minimum to maximum. This can happen especially frequently if the user is multi-tasking. This, too, has negative implications for battery life.
2: OndemandX:
Basically an ondemand with suspend/wake profiles. This governor is supposed to be a battery friendly ondemand. When screen is off, max frequency is capped at 500 mhz. Even though ondemand is the default governor in many kernel and is considered safe/stable, the support for ondemand/ondemandX depends on CPU capability to do fast frequency switching which are very low latency frequency transitions. I have read somewhere that the performance of ondemand/ondemandx were significantly varying for different i/o schedulers. This is not true for most of the other governors. I personally feel ondemand/ondemandx goes best with SIO I/O scheduler.
3: Performance Governor:
This locks the phone's CPU at maximum frequency. While this may sound like an ugly idea, there is growing evidence to suggest that running a phone at its maximum frequency at all times will allow a faster race-to-idle. Race-to-idle is the process by which a phone completes a given task, such as syncing email, and returns the CPU to the extremely efficient low-power state. This still requires extensive testing, and a kernel that properly implements a given CPU's C-states (low power states).
4: Powersave Governor:
The opposite of the Performance governor, the Powersave governor locks the CPU frequency at the lowest frequency set by the user.
5:Conservative Governor:
This biases the phone to prefer the lowest possible clockspeed as often as possible. In other words, a larger and more persistent load must be placed on the CPU before the conservative governor will be prompted to raise the CPU clockspeed. Depending on how the developer has implemented this governor, and the minimum clockspeed chosen by the user, the conservative governor can introduce choppy performance. On the other hand, it can be good for battery life.
The Conservative Governor is also frequently described as a "slow OnDemand," if that helps to give you a more complete picture of its functionality.
6: Userspace Governor:
This governor, exceptionally rare for the world of mobile devices, allows any program executed by the user to set the CPU's operating frequency. This governor is more common amongst servers or desktop PCs where an application (like a power profile app) needs privileges to set the CPU clockspeed.
7: Min Max
well this governor makes use of only min & maximum frequency based on workload... no intermediate frequencies are used.
8: Interactive Governor:
Much like the OnDemand governor, the Interactive governor dynamically scales CPU clockspeed in response to the workload placed on the CPU by the user. This is where the similarities end. Interactive is significantly more responsive than OnDemand, because it's faster at scaling to maximum frequency.
Unlike OnDemand, which you'll recall scales clockspeed in the context of a work queue, Interactive scales the clockspeed over the course of a timer set arbitrarily by the kernel developer. In other words, if an application demands a ramp to maximum clockspeed (by placing 100% load on the CPU), a user can execute another task before the governor starts reducing CPU frequency. This can eliminate the frequency bouncing discussed in the OnDemand section. Because of this timer, Interactive is also better prepared to utilize intermediate clockspeeds that fall between the minimum and maximum CPU frequencies. This is another pro-battery life benefit of Interactive.
However, because Interactive is permitted to spend more time at maximum frequency than OnDemand (for device performance reasons), the battery-saving benefits discussed above are effectively negated. Long story short, Interactive offers better performance than OnDemand (some say the best performance of any governor) and negligibly different battery life.
Interactive also makes the assumption that a user turning the screen on will shortly be followed by the user interacting with some application on their device. Because of this, screen on triggers a ramp to maximum clockspeed, followed by the timer behavior described above.
9: InteractiveX Governor:
Created by kernel developer "Imoseyon," the InteractiveX governor is based heavily on the Interactive governor, enhanced with tuned timer parameters to better balance battery vs. performance. The InteractiveX governor's defining feature, however, is that it locks the CPU frequency to the user's lowest defined speed when the screen is off.
10: Smartass
Is based on the concept of the interactive governor.
I have always agreed that in theory the way interactive works – by taking over the idle loop – is very attractive. I have never managed to tweak it so it would behave decently in real life. Smartass is a complete rewrite of the code plus more. I think its a success. Performance is on par with the “old” minmax and I think smartass is a bit more responsive. Battery life is hard to quantify precisely but it does spend much more time at the lower frequencies.
Smartass will also cap the max frequency when sleeping to 352Mhz (or if your min frequency is higher than 352 – why?! – it will cap it to your min frequency). Lets take for example the 528/176 kernel, it will sleep at 352/176. No need for sleep profiles any more!"
11: SmartassV2:
Version 2 of the original smartass governor from Erasmux. Another favorite for many a people. The governor aim for an "ideal frequency", and ramp up more aggressively towards this freq and less aggressive after. It uses different ideal frequencies for screen on and screen off, namely awake_ideal_freq and sleep_ideal_freq. This governor scales down CPU very fast (to hit sleep_ideal_freq soon) while screen is off and scales up rapidly to awake_ideal_freq (500 mhz for GS2 by default) when screen is on. There's no upper limit for frequency while screen is off (unlike Smartass). So the entire frequency range is available for the governor to use during screen-on and screen-off state. The motto of this governor is a balance between performance and battery.
12: Scary
A new governor wrote based on conservative with some smartass features, it scales accordingly to conservatives laws. So it will start from the bottom, take a load sample, if it's above the upthreshold, ramp up only one speed at a time, and ramp down one at a time. It will automatically cap the off screen speeds to 245Mhz, and if your min freq is higher than 245mhz, it will reset the min to 120mhz while screen is off and restore it upon screen awakening, and still scale accordingly to conservatives laws. So it spends most of its time at lower frequencies. The goal of this is to get the best battery life with decent performance. It will give the same performance as conservative right now, it will get tweaked over time.
13: Lagfree:
Lagfree is similar to ondemand. Main difference is it's optimization to become more battery friendly. Frequency is gracefully decreased and increased, unlike ondemand which jumps to 100% too often. Lagfree does not skip any frequency step while scaling up or down. Remember that if there's a requirement for sudden burst of power, lagfree can not satisfy that since it has to raise cpu through each higher frequency step from current. Some users report that video playback using lagfree stutters a little.
14: Smoothass:
The same as the Smartass “governor” But MUCH more aggressive & across the board this one has a better battery life that is about a third better than stock KERNEL
15: Brazilianwax:
Similar to smartassV2. More aggressive ramping, so more performance, less battery
16: SavagedZen:
Another smartassV2 based governor. Achieves good balance between performance & battery as compared to brazilianwax.
17: Lazy:
This governor from Ezekeel is basically an ondemand with an additional parameter min_time_state to specify the minimum time CPU stays on a frequency before scaling up/down. The Idea here is to eliminate any instabilities caused by fast frequency switching by ondemand. Lazy governor polls more often than ondemand, but changes frequency only after completing min_time_state on a step overriding sampling interval. Lazy also has a screenoff_maxfreq parameter which when enabled will cause the governor to always select the maximum frequency while the screen is off.
18: Lionheart:
Lionheart is a conservative-based governor which is based on samsung's update3 source.
The tunables (such as the thresholds and sampling rate) were changed so the governor behaves more like the performance one, at the cost of battery as the scaling is very aggressive.
19: LionheartX
LionheartX is based on Lionheart but has a few changes on the tunables and features a suspend profile based on Smartass governor.
20: Intellidemand:
Intellidemand aka Intelligent Ondemand from Faux is yet another governor that's based on ondemand. Unlike what some users believe, this governor is not the replacement for OC Daemon (Having different governors for sleep and awake). The original intellidemand behaves differently according to GPU usage. When GPU is really busy (gaming, maps, benchmarking, etc) intellidemand behaves like ondemand. When GPU is 'idling' (or moderately busy), intellidemand limits max frequency to a step depending on frequencies available in your device/kernel for saving battery. This is called browsing mode. We can see some 'traces' of interactive governor here. Frequency scale-up decision is made based on idling time of CPU. Lower idling time (<20%) causes CPU to scale-up from current frequency. Frequency scale-down happens at steps=5% of max frequency. (This parameter is tunable only in conservative, among the popular governors)
To sum up, this is an intelligent ondemand that enters browsing mode to limit max frequency when GPU is idling, and (exits browsing mode) behaves like ondemand when GPU is busy; to deliver performance for gaming and such. Intellidemand does not jump to highest frequency when screen is off.
21: Hotplug Governor:
The “hotplug” governor scales CPU frequency based on load, similar to “ondemand”. It scales up to the highest frequency when “up_threshold” is crossed and scales down one frequency at a time when “down_threshold” is crossed. Unlike those governors, target frequencies are determined by directly accessing the CPUfreq frequency table, instead of taking some percentage of maximum available frequency.
The key difference in the “hotplug” governor is that it will disable auxillary CPUs when the system is very idle, and enable them again once the system becomes busy. This is achieved by averaging load over multiple sampling periods; if CPUs were online or offlined based on a single sampling period then thrashing will occur.
Sysfs entries exist for “hotplug_in_sampling_periods” and for “hotplug_out_sampling_periods” which determine how many consecutive periods get averaged to determine if auxillery CPUs should be onlined or offlined. Defaults are 5 periods and 20 periods respectively. Otherwise the standard sysfs entries you might find for “ondemand” and “conservative” governors are there.
Obviously, this governor is only available on multi-core devices.
22: Wheatley
in short words this govenor is build on “ondemand” but increases the C4 state time of the CPU and doing so trying to save juice.
23: Basically interactive governor with added smartass bits and variable (as opposed to fixed amout) frequency scaling, based on currently occuring cpu loads. Has, like smartass, a sleep profile built-in. See link for details on exact scaling.
24: Abyssplug governor is a modified hotplug governor.
25. BadAss Governor:
Badass removes all of this "fast peaking" to the max frequency. On a typical system the cpu won't go above 918Mhz and therefore stay cool and will use less power. To trigger a frequency increase, the system must run a bit @ 918Mhz with high load, then the frequency is bumped to 1188Mhz. If that is still not enough the governor gives you full throttle. (this transition should not take longer than 1-2 seconds, depending on the load your system is experiencing)
Badass will also take the gpu load into consideration. If the gpu is moderately busy it will bypass the above check and clock the cpu with 1188Mhz. If the gpu is crushed under load, badass will lift the restrictions to the cpu.
26, Ktonnservative
Ondemand scales to the highest frequency as soon as a load occurs. Conservative scales upward based on the frequency step variable which means for the most part will scale through every frequency to achieve the target load thresholds. What this practically means is ondemand is prone to wasting power on unneeded clock cycles. Ondemand also features something called a down differential, this variable determines how long the governor will remain at the given frequency before scaling down. Conservative does not have this, but instead relies on having a down threshold which insures that as soon as the load drops below a given variable it scales down as fast as the sampling rate allows. The result to this is a governor which attempts to keep the load level tolerable and save you battery! Now ! Ktoonservative Is that but in addition contains a hotpluging variable which determines when the second core comes online. The governor shuts the core off when it returns to the second lowest frequency thus giving us a handle on the second performance factor in our CPUs behavior. While by default conservative is a poor performer it can be made to perform comparably to even performance governor. Here are some settings to discuss and start with. They are slightly less battery friendly under a load but very very well performing.
27. AssWax
So far, all I have found about this Governor is that it belongs in the interactive family. I'll update this when I find more
28. Sleepy
The Sleepy (formerly known as Solo) is an attempt to strike a balance between performance and battery power to create. It is based on the getweakten Ondemand of Arighi and is optimized for the SGS2. It may include imoseyon's Ondemandx with some tweaks Down_sampling and other features that set by the user through the sysfs of "echo" call. Sleepy is the behavior of Ondemandx when he is in action, very similar.
29. Hyper
The Hyper (formerly known as kenobi) is an aggressive smart and smooth, optimized for SGS2 getweakt and, based on the Ondemand, which was getweakt of Arighi and was equipped with several features of Ondemandx suspend imoseyon. (Added by sysfs, the settings suspend_freq and suspend Imoseyon's code) is the behavior of the hyper Ondemand if he is in action, very similar. He also has the Arighi's fast_start deep_sleep and detection features. In addition, the maximum frequency is in suspend mode 500Mhz.
Credits goes to:
http://icrontic.com/discussion/95140...m-tuner-tegrak
http://forum.xda-developers.com/show....php?t=1369817
What is a scheduler?
In a multitasking operating system, there must be an instance, the processes that want to run, CPU time and allocates it "goes to sleep" after the allotted time (timeslice) again. This instance is called the scheduler, such as opening and closing applications. that is, how fast they are open and how long they are kept in RAM.
I / O scheduler can have many purposes like:
To minimize time searching on the hard disk
Set priorities for specific process requests
To regulate a particular portion of the bandwidth of the data carrier to each running process
To guarantee certain process requests within a certain time
Which scheduler are available?
CFQ
Deadline
VR
Simple
Noop
Anticipatory
BFQ
Sio
Anticipatory:
Two important things here are indicative of that event:
- Looking on the flash drive is very slow from Equip
- Write operations while at any time are processed, however, be read operations preferred, ie, this scheduler returns the read operations a higher priority than the write operations.
Benefits:
- Requests of read accesses are never treated secondarily, that has equally good reading performance on flash drives like the noop
Disadvantages:
- Requests from process operations are not always available
- Reduced write performance on high-performance hard drives
CFQ:
The CFQ - Completely Fair Queuing - similar to the Dead Line maintains a scalable continuous Prozess-I/O-Warteschlange, ie the available I / O bandwidth tried fairly and evenly to all I / O requests to distribute. He created a statistics between blocks and processes. With these statistics it can "guess" when the next block is requested by what process, ie each process queue contains requests of synchronous processes, which in turn is dependent upon the priority of the original process. There is a V2 and the CFQ has some fixes, such as were the I / O request, hunger, and some small search backward integrated to improve the responsiveness.
Benefits:
- Has the goal of a balanced I / O performance to deliver
- The easiest way to set
- Excellent on multiprocessor systems
- Best performance of the database after the deadline
Disadvantages:
- Some reported user that the media scanning would take this very very long time and this by the very fair and even distribution of bandwidth on the I / O operations during the boot process is conditioned with the media scanning is not necessarily the highest should have priority
- Jitter (worst case delay) can sometimes be very high because the number of competing with each other process tasks
Deadline:
This scheduler has the goal of reducing I / O wait time of a process of inquiry. This is done using the block numbers of the data on the drive. This also blocks an outlying block numbers are processed, each request receives a maximum delivery time. This is in addition to the Governor BFQ very popular and in many well known kernels, such as the Nexus S Netarchy. He was indeed better than the BFQ, but compared to the VR he will be weaker.
Benefits:
- Is nearly a real-time scheduler.
- Characterized by reducing the waiting time of each process from - best scheduler for database access and queries.
- Bandwidth requirements of a process, eg what percentage does a CPU is easy to calculate.
- As the Governor-noop ideal for flash drives
Disadvantages:
- If the system is overloaded, can go a lost set of processes, and is not as easy to predict
SIO:
It aims to achieve with minimal effort at a low latency I / O requests. Not a priority to put in queue, instead simply merge the requests. This scheduler is a mix between the noop and deadline. With him there is no conversion or sorting of requests.
Benefits:
- It is simple and stable. - Minimized Starvations (starvation) for inquiries
Disadvantages:
- Slow random write speeds on flash drives as opposed to other schedulers. - Sequential read speeds on flash drives, not as good
Noop:
The noop scheduler is the simplest of them. He is best suited for storage devices that are not subject to mechanical movements, such as our flash drives in our SGSII's to use to access the data. The advantage is that flash drives do not require rearrangement of the I / O requests, unlike normal hard drives. ie the data that come first are written first. He's basically not a real scheduler, as it leaves the scheduling of the hardware.
Benefits:
- Adds all incoming I / O requests in a first-come-who-first-served queue and implements requests with the fewest number of CPU cycles, so also battery friendly
- Is suitable for flash drives because there is no search errors
- Good data throughput on db systems
Disadvantages:
- Reducing the number of CPU cycles corresponds to a simultaneous decline in performance einhergehendem
VR:
Unlike other scheduling software, synchronous and asynchronous requests are not handled separately, but it will impose a fair and balanced within this deadline requests, that the next request to be served is a function of distance from the last request. The VR is a very good scheduler with elements of the deadline scheduler. He will probably be the best for MTD Android devices. He is the one who can make the most of the benchmark points, but he is also an unstable schedulers, because his performance falter. Sometimes they fluctuate below the average, sometimes it fluctuates above the average, but if above, then he is the best.
Benefits:
- Is the best scheduler for benchmarks
Disadvantages:
- Performance variability can lead to different results
- Very often unstable or unzverlässig
Simple:
As the name suggests, it is more of a simple or simple scheduler. Especially suitable for EMMC devices. He is reliable, maybe not as good as the VR, when this time has a good day, but he is despite all this very performance-based and does his best. At the moment it is the default scheduler in quasar kernel.
Advantages: - not known
Cons: - not known
BFQ:
Instead requests divided into time segments as the CFQ has, on the BFQ budget. The flash drive will be granted an active process until it has exhausted its budget (number of sectors on the flash drive). The awards BFQ high budget does not read tasks.
Benefits:
- Has a very good USB data transfer rate.
- Be the best scheduler for playback of HD video recording and video streaming (due to less jitter than CFQ Scheduler, and others)
- Regarded as a very precise working Scheduler
- Delivers 30% more throughput than CFQ
Disadvantages:
- Not the best scheduler for benchmarks - higher budgets that were allocated to a process that can affect the interactivity and bring with it increased latency.
How can I change the governor and scheduler?
There are two ways to change the governor and schedulers, as well as the settings for the Governorn. Either manually, in which you use a file manager like Root Explorer and then knows how to / sys / devices / system and then change the files to his wishes, provided you what you're doing, or via a graphical interface or by phone as SetCPU Voltage Control. These are the most prominent apps when it comes to adjusting the governor and / or scheduler.
- SetCPU are, besides the possibility of the clock speed of the CPU, setting profiles in certain situations, only to change the way the governor. The scheduler can not change it.
- Voltage control can alter both the governor and the scheduler, but has no way to adjust behavior profiles. While you can set various overclocking, Governor and scheduler profiles manually, but nothing more. Nevertheless, I prefer the VC, since it is simple and gives me the opportunity to change the scheduler.
Credit goes to Tinzdroid
Good find. I found that a few months ago when i had a few governor questions.
That's a lot of governors. Too many honestly. How's it go? "Too much of a good thing is bad" I'd say 29 +1 (pegasusq isn't listed) is just overkill given that a few are just custom rehashes of others that can be done via apps or scripts but I do understand the point. Seems we're getting to a point where we'll need to narrow it down to the gems though. For multi-core phones that list is small unless you do some editing and/or scripts as only a few (hotplug and pegasusq mostly, abyssplug too I think) are naturally multi-core aware. The rest will only use core0.
Good find though. Normally you only find ones with about 1/2 of them listed.
Sent from my SPH-D710 using xda app-developers app
How about a governor named "fantasy"? Have this on my tablet set as default one by manufacturer.
Aessaya said:
How about a governor named "fantasy"? Have this on my tablet set as default one by manufacturer.
Click to expand...
Click to collapse
Did a simple google search, found the following info at http://tabletrepublic.com/forum/novo-7-elf/cpu-running-1008mhz-696.html
Antutu cpu works better for me. and so far, i set my cpu speed at 912 max 60 min, fantasy governor. Because this tablet has high resolution and require cpu power, it is better not to set the cpu max speed too low.
And
http://www.slatedroid.com/topic/30592-apps-for-cpu-speed-mod-recommendation/
'fantasy' - This driver adds a dynamic cpu freq policy governor.
The governor does a periodic polling and changes frequency based on the CPU utilization.
The support for this governor depends on CPU capability to do fast frequency switching (i.e, very low latency frequency transitions).
lulzactiveq is my personal choice, but you need to tweak the values.
Thank you for the post!
Thank you for the write up, I've seen all of them, but didn't know until now how the user created ones worked over presets. This should be stickied for every device, applies to every android device I have.
Ok so I am experimenting with Set CPU app
Can you guys tell me what Profiles you run or prefer
Thanks
EwOkie said:
Ok so I am experimenting with Set CPU app
Can you guys tell me what Profiles you run or prefer
Thanks
Click to expand...
Click to collapse
I don't use SetCPU (way over complicated for no good reason) but Kernel Tweaker. With my experience on the F4k kernel:
JB - Interactive
KK - Smartass V2
IO Scheduler: normal phone use ROW. If you have some regular write operation, CFQ. I've tried SIO, ZEN and NOOP, overrated. While NOOP and ZEN feels really responsive (like mininium lag) but it unstable. As for SIO I don't see what people see in it. It not particularly faster, and nor battery friendly. At least that what I saw on my S3 with Pegasus governor. And I don't use benchmark, this is a pure observe from normal day-to-day use on open app, multi-tasking, browsing, etc. I've tried all mention governor for at least a week.
As for UV, I've done -1.5V (yes, not a typo) on my phone. Again, I don't bench or play games, just regular day-to-day email, browsing, photo, etc.
I'm on JB 4.2.2 Stock and using SmartAssV2 + ROW. Max freq. on 2.05Ghz. Working fine so far.
Check out this thread: http://forum.xda-developers.com/showthread.php?t=2686845 for undervolting results part (I'm guessing it's in your SET CPU too).
jorgeealdunate said:
I'm on JB 4.2.2 Stock and using SmartAssV2 + ROW. Max freq. on 2.05Ghz. Working fine so far.
Click to expand...
Click to collapse
wich kernel do you have bro?
blake2893 said:
wich kernel do you have bro?
Click to expand...
Click to collapse
I'm using f4ction kernel 1.3.0 with 90hardlimit_2.05Ghz.zip flashed after the kernel with TWRP.
Also, i like CPU Control, which is very easy to use.
I don't need set cpu anymore. I turn on air plane mode at night so battery life can be longer.
And checked on cpu's cores, system automaticly control frequences.
Using SetCPU the Charging with USB takes ages
Do I need to set a profile as I have tried other apps to change stuff but this seems to be the only option for me with a modified Stock Rom
Have used these settings so far with no lags or issues .. can someone pease clarify if this is ok...
SET SCREEN OFF
CPU - 810 - 384 Gov: Interactive / Priority 100
SCREEN ON
CPU - 1566 -384 Gov : OnDemand / Deadline / Priority 52
BATTERY <45
CPU - 1026 - 394 Gov: OnDemand / CFQ / Priority 50
SLEEP 00:45 - 08.25
CPU - 584 - 384 Gov: Powersave / CFQ / Priority 49
What about Battery or CPU Temp?
EwOkie said:
Using SetCPU the Charging with USB takes ages
Do I need to set a profile as I have tried other apps to change stuff but this seems to be the only option for me with a modified Stock Rom
Have used these settings so far with no lags or issues .. can someone pease clarify if this is ok...
SET SCREEN OFF
CPU - 810 - 384 Gov: Interactive / Priority 100
SCREEN ON
CPU - 1566 -384 Gov : OnDemand / Deadline / Priority 52
BATTERY <45
CPU - 1026 - 394 Gov: OnDemand / CFQ / Priority 50
SLEEP 00:45 - 08.25
CPU - 584 - 384 Gov: Powersave / CFQ / Priority 49
What about Battery or CPU Temp?
Click to expand...
Click to collapse
Powersave governor is a governor that locks on the lowest possible speed provide by the kernel. No point on setting a speed range since it doesn't dynamically switch between them.
Well as I mention above, I don't recommend using schedule beside ROW or CFQ. If anyone still thinks SIO, NOOP, Deadline is significantly faster/better than CFQ this is a very interesting test: http://www.phoronix.com/scan.php?page=article&item=linux_iosched_2012
I am currently on RR with the m8 kernel.
I am seeing a very bizarre behavioural pattern where powersaving governors and hotplugs such as alucard have ha huge battery consumption whereas interactive governors such as yankactive or intelliactive consume way less.
For example my current settings are smartmax_eps governor with msm_hotplug,
Code:
CPU Maximum Frequency 1267Mhz
CPU minumum Frequency 268Mhz
Sync threshold disabled
Input boost frequency disabled
For my hotplug I have the MSM Hotplug
Code:
all defaults
For GPU governor
Code:
Max Frequency 462Mhz
GPU governor powersave
I have also enabled vomer accurich in screen settings, but I don't think it should have any bearings on the battery life.
and it still consumes more than Intelliactive with the MSM Hotplug and 2 Boosted cores. and max boost frequency 2419MHz.
I don't even want to talk abour zzmoove that has an incredible power drain when I have enabled the zzmoove all hotplugs disabled and zzmoove native hotplug enabled (23%/h).
Am I doing something wrong or are some of my configurations wrong? I have tasker and wanted to have the best powersaving experience while on the go and then switch over to a good interactive governor when playing some games sometimes. I am missing the power saving profile with great battery life.
Does here someone have a better configuration profile or an idea of what the problem might be or the thing that I am missing?
Alucard, arteractive and SavagedZen use more 2.4GHz(max freq). I noticed that, and I don't know why mentioned governors do that.
That's on Team M8 kernel.
@Zile995
What is the reasoning behind using max freq so much? Isn't it so that 4 slow cores tend to be more energy effiecient than 2 fast ones?
What is the setup you are using if I may ask?
Nyquis said:
@Zile995
What is the reasoning behind using max freq so much? Isn't it so that 4 slow cores tend to be more energy effiecient than 2 fast ones?
What is the setup you are using if I may ask?
Click to expand...
Click to collapse
This http://forum.xda-developers.com/showthread.php?p=68121297
+ intelli_plug
They have bugs, I don't know why.