Hello i have Kindle Fire Model 3HT7G, i try to install TWRP on OS 8.4.8 seems to work but after reboot system KIndle boot loop. What i can do to recover my Kindle?
Does the logo ever turn blue? If it doesn't do not worry as kindle 8.9" models don't work with fastboot cables. There is a different method form getting it into fastboot. Just tell me if the logo turns blue or not and I can instruct you from there.
Sent from my Amazon Tate using Tapatalk
stunts513 said:
Does the logo ever turn blue? If it doesn't do not worry as kindle 8.9" models don't work with fastboot cables. There is a different method form getting it into fastboot. Just tell me if the logo turns blue or not and I can instruct you from there.
Sent from my Amazon Tate using Tapatalk
Click to expand...
Click to collapse
Not only orange
Francey said:
Not only orange
Click to expand...
Click to collapse
Use this tool to restore your KFHD 8.9. http://forum.xda-developers.com/showthread.php?t=2011126 please do read the instructions first, two times and then proceed. You only need your stock USB cord.
Edit: Make sure to jump back to the OP for the tutorial.
Sent from my Nexus 7 Flo running CM 11 4.4.2 with ElementalX Kernel using XDA Premium 4 mobile app
If it doesn't turn blue you are going to have fun getting it into fastboot...
Sent from my LG-P769 using Tapatalk
stunts513 said:
If it doesn't turn blue you are going to have fun getting it into fastboot...
Sent from my LG-P769 using Tapatalk
Click to expand...
Click to collapse
I test the software but seems to not work, i don't have original cable. I try to enable kindle fastboot but nothing
This is going to be a pain to type on my phone... plug the device in while off, keep the device manager open when doing this, it should briefly show up as a jem device, when it does right click it and hit update driver, point it to where you will have downloaded and extracted the driver in my signature. Once you install the drivers, shut it off and unplug it, you will need to open a command prompt that's cd'd into a directory like kffa where you can run a fastboot command. Then run
Code:
fastboot -i 0x1949 getvar product
it should say waiting for device, once it does plug your kindle in, it should go into fastboot mode and you can restore with kffa.
Sent from my LG-P769 using Tapatalk
stunts513 said:
This is going to be a pain to type on my phone... plug the device in while off, keep the device manager open when doing this, it should briefly show up as a jem device, when it does right click it and hit update driver, point it to where you will have downloaded and extracted the driver in my signature. Once you install the drivers, shut it off and unplug it, you will need to open a command prompt that's cd'd into a directory like kffa where you can run a fastboot command. Then run
Code:
fastboot -i 0x1949 getvar product
it should say waiting for device, once it does plug your kindle in, it should go into fastboot mode and you can restore with kffa.
Sent from my LG-P769 using Tapatalk
Click to expand...
Click to collapse
Thanks works Now if i want to have original Amazon OS with Root, TWRP and Play Store what i can do?
Think there's an old Amazon os flashable zip in the dev section. Might be pre-rooted. You can always root it with binary's root if not and install the playstore with kffa or something. I personally prefer running a custom rom over stock any day. Much better interface on cm based rooms compared to amazon's os. Only downside is lack of prime video.
Sent from my LG-P769 using Tapatalk
All I did was rooted and then used fireflash...
Sent from my Amazon Jem using Tapatalk
Use kffa to install the Google store or kindlefree. Just curious, what were you planning to do by installing twrp and keeping stock amazon os? You just want a method to easily recover from a brick or were you thinking of flashing a ROM at some point?
Sent from my Amazon Tate using Tapatalk
stunts513 said:
This is going to be a pain to type on my phone... plug the device in while off, keep the device manager open when doing this, it should briefly show up as a jem device, when it does right click it and hit update driver, point it to where you will have downloaded and extracted the driver in my signature. Once you install the drivers, shut it off and unplug it, you will need to open a command prompt that's cd'd into a directory like kffa where you can run a fastboot command. Then run
Code:
fastboot -i 0x1949 getvar product
it should say waiting for device, once it does plug your kindle in, it should go into fastboot mode and you can restore with kffa.
Sent from my LG-P769 using Tapatalk
Click to expand...
Click to collapse
Hello,
I have the exact same problem as the original poster with my Kindle Fire HD 8.9". I tried downloading the drivers in your description. I connect the kindle and try to update the drivers for Jem-PVT-Prod-04. I direct my computer to install the drivers that I extracted, however it returns an error saying that "the hash for the file is not present in the specified catalog file. The file is likely corrupt or the victim of tampering." I'm not sure what I'm doing wrong, this is my first time trying to root android. Thanks so much for the help!
You need to disable driver signature enforcement. Look it up on Google, I don't know the procedure offhand because I don't use windows 8.
Sent from my Amazon Tate using Tapatalk
Hello. I know this thread is old but I just stumbled across it and want to restore my mom's Kindle HD 8.9. I was able to install the drivers for Jem-PVT-Prod-04 when it showed really quick on the device manager. When I try the CMD "fastboot -i 0x1949 getvar product" from the command prompt it takes me to the desktop folder where the Zip file is located and I had already unzipped the KFHD_SRTv2.1- 8.1.4.
I tried running the SR Tool and my Kindle was off. I had selected Enable Fastboot. When it prompted me to turn on I did and it prompted DAEMON. So nothing was going on So I decided to start from the beginning.
When I plug in the Kindle Windows 10 prompts like it recognizes the device but the JEM PVT is no longer popping up in the Device Manager under OTHER Devices like the first time. I checked the Registry to remove any trace of the JEM and it isn't even in there. I tried to remove other devices.
Sorry for the long story. Can I just use the SR Tool to wipe out the Data and Cache once I redo everything from my second PC and install the Kindle OS from Amazon's website to restore the Device from the loop? It is not blue. Is there another link with step by step instructions or a You Tube Video for noob like me? I used to be good at this but my skills have really regressed.
Thank you
Frank
Related
Hi folks. I've been studying the forums for a few days now and can't resolve my issue. Hoping you will tolerate a noob dilemna.
I have a KF 8.9 HD running CM 10.1 and play store with no issues. Runs flawlessly. In my attempt to try out the CM 10.2 I wiped out the internal memory, cache etc.
I'm using Windows 8.1 to communicate with the KF.
I can only see the Kindle and use the ADB commands if I boot into TWRP. It reports the number and recovery when I run ADB devices in an admin command window. I'm unable to use the ADB commands when the KF is running the 10.1 OS desktop. Windows device manager reports it as MTB USB Device instead of the ADB Composite Device I get when it's running in TWRP. No matter how much tinkering and uninstalling KF drivers, I can't get it to see the KF.
I've also downloaded KF FirstAide.I get all of the menu options but it hangs whenever I try any options. For example, it hangs after reporting daemon started successfully when I try to use the safe diagnostics. I can't get it to communicate with the KF.
I'm in need of restoring this KF 8.9 HD to Amazon stock OS. I've ordered a new one and will be passing this one on to someone that's looking for the Amazon stock system. Otherwise I'd leave it as it since CM 10.1 is running.
Really appreciate the help you can give me.
You have to enable adb in cm 10.1, click on the build number about 10 times under "about tablet" in settings, that should enable the developer menu in settings so you can enable adb.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
You have to enable adb in cm 10.1, click on the build number about 10 times under "about tablet" in settings, that should enable the developer menu in settings so you can enable adb.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Thanks Stunts. That should get me closer to figuring this out. The {} Developer Options are now visible on the KF. Root access is set to Apps and ADB. Uninstalled KF Win 8.1 device drivers again and rebooted both KF and computer. Still doesn't see it in Win 8.1 when I use ADB Devices (doesn't report any devices).
The Windows driver is still reporting MTB USB Device. When I try to update the driver using androide_usb.inf windows reports there is no compatible software driver in that folder.
I'll keep messing with the Developer Options on the KF. Any other suggestions?
Stupid question but did you check the box to enable adb? I didn't see that said you did only something else so I thought I'd ask. Also the MTP device is desperate so you shouldn't have to update it with the adb drivers, it should be a desperate device usually under its own android debugging category if I remember right.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
Stupid question but did you check the box to enable adb? I didn't see that said you did only something else so I thought I'd ask. Also the MTP device is desperate so you shouldn't have to update it with the adb drivers, it should be a desperate device usually under its own android debugging category if I remember right.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
I gave up on getting it to work in Windows 8.1. There must be something about the way it handles the drivers that prevents the device being seen when CM10.1 is running. Very frustrating. I must have tried 100 different variations but I can only get it to see the KF in Portable Device Player, not the Android Composite Device it sees when I'm running in TWRP mode.
I ended up using my daughter's netbook which is running Windows 7. Installed Java Developers Tools, KF First Aide. I can now see finally both the device as the portable media player and the Android Composite Device. Yeah!
One last problem to overcome. I want to wipe the KF clean and install the stock Amazon system. KFAide now communicates with the device in CM10.1. I was able to do a backup but it still hangs when I try to restore the stock system.
Is there a place a can get the stock image files for KF 8.9 HD? 8.1.3 or 8.1.4 should be fine (I don't remember which I was running before installing CM10.1). Ideally I want to transfer the stock images to the SDCard directory and then use TWRP to reinstall. Sound reasonable?
If you want full unrooted stock just download the latest update from Amazon's website for your device, put it on the kindle's sdcard and change the extension to .zip, and wipe the system, and do a factory reset then flash the amazon update, it should remove twrp and 2nd boot loader as well
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
If you want full unrooted stock just download the latest update from Amazon's website for your device, put it on the kindle's sdcard and change the extension to .zip, and wipe the system, and do a factory reset then flash the amazon update, it should remove twrp and 2nd boot loader as well
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Thanks again Stunt. Want to make sure I do this correctly.
Do I just check off wipe system in twrp or other items like internal memory etc. I'm thinking just system.
Is the factory reset from within twrp?
Finally, do i flash while in fastboot mode?
Sorry for all the questions. Appreciate the help
When you hit wipe I believe there is a factory reset button, and after that you would do another wipe and check system, then install the amazon update zip file from within twrp, not fastboot.
Sent from my Amazon Kindle Fire HD using Tapatalk
Ruacasa said:
Thanks again Stunt. Want to make sure I do this correctly.
Do I just check off wipe system in twrp or other items like internal memory etc. I'm thinking just system.
Is the factory reset from within twrp?
Finally, do i flash while in fastboot mode?
Sorry for all the questions. Appreciate the help
Click to expand...
Click to collapse
How to Disable Driver Signature Enforcement to allow installation of Windows 7 Printer Drivers on Windows 8 http://www.fotoclubinc.com/blog/how...on-of-windows-7-printer-drivers-on-windows-8/
Crap! Now it hangs on the Kindlefire screen (orange color not the blue rooted color).
I can use KDFirstAide to get it back in fastboot mode. I tried the various options to restore su, erase cache and user data etc, but nothing. It continues to hang at the KindleFire screen
Any suggestion? Are there any Fastboot commands I can use to restore and use twrp again?
You need to run "fastboot -i 0x1949 getvar product" with the kindle unplugged and off then plug it in when it says waiting for device, that should put it into fastboot so kffa can restore the system.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
You need to run "fastboot -i 0x1949 getvar product" with the kindle unplugged and off then plug it in when it says waiting for device, that should put it into fastboot so kffa can restore the system.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Tired it and ran KFF. KFF prompts me that the Kindle Must be Powered on to the Desktop to do a restore of the system. Can't get to the desktop at this point. If I select no at the desktop prompt it starts the deamon and hangs at that point. Probably because it's trying to use ADB which is not active in Fastboot mode.
I was successful in using KFF to do a backup restore, but it is still hanging on the KindleFire screen.
The only thing I can do right now is get to Fastboot mode using the KFRecovery utility and Enabling Fastboot to get to Fastboot mode.
Something didn't restore right then, have you tried kindle fire system restore tool? http://forum.xda-developers.com/showthread.php?t=2011126
Is fastboot mode working as far as you know from running the command I mentioned? It should report something back with jem in it .
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
Something didn't restore right then, have you tried kindle fire system restore tool? http://forum.xda-developers.com/showthread.php?t=2011126
Is fastboot mode working as far as you know from running the command I mentioned? It should report something back with jem in it .
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Fastboot is still working. I did run that command you posted: fastboot -i 0x1949 getvar product. It reported Prod: Jem-PVT-Prod-04.
I have tried the Recovery tool you linked to but it hangs when I try to restore the system (using any of the options)
Update: I was able to get KFFirstAide to complete it's recover using 8.1.2 option. I got a full red screen then it booted to the Fastboot Mode Screen. I feel I'm getting closer. I held the power button for 20 seconds, then release for 5 and power up again. It's still going into Fastboot Mode. Any advice?
Try restoring the system one more time, if that doesn't work you might have to reflash the boot loader. You can try "fastboot -i 0x1949 reboot" or "fastboot -i 0x1949 OEM idme bootmode 1" possibly followed by the first command. I have my doubts that command will work though and I'm not positive if system is 1 or not because the numbers used to be different on the original all and I'm not too familiar with the numbers on the hd models, but I think its 1.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
Try restoring the system one more time, if that doesn't work you might have to reflash the boot loader. You can try "fastboot -i 0x1949 reboot" or "fastboot -i 0x1949 OEM idme bootmode 1" possibly followed by the first command. I have my doubts that command will work though and I'm not positive if system is 1 or not because the numbers used to be different on the original all and I'm not too familiar with the numbers on the hd models, but I think its 1.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Thanks for sticking with me Stunts. I tried reinstalling it already. Tried both variations of the fastboot commands you listed. Is it possible the second one is missing an argument? When I enter it by itself it comes back as listing all of the fastboot options (I usually get that when I type something wrong).
So it sounds like I just need to get out of the Fastboot Mode. It always shows a full red screen before entering Fastboot Mode
Odd, I suggest reflashing the boot loader then, download the boot loader for your device here: http://forum.xda-developers.com/showthread.php?t=2128175
Its the 8.1.4 boot loader listed, make sure you check that the md5sum matches what's on that page or you could hard brick it.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
Odd, I suggest reflashing the boot loader then, download the boot loader for your device here: http://forum.xda-developers.com/showthread.php?t=2128175
Its the 8.1.4 boot loader listed, make sure you check that the md5sum matches what's on that page or you could hard brick it.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Downloaded and installed new bootloader. No errors but no improvement. Cycles KindleFire (orange) then Full Red Screen Then Fastboot Mode.
I also reinstall using KF First Aide- Completely Restore The KFHD 8.9 8.2.1 option again.
Ruacasa said:
Fastboot is still working. I did run that command you posted: fastboot -i 0x1949 getvar product. It reported Prod: Jem-PVT-Prod-04.
I have tried the Recovery tool you linked to but it hangs when I try to restore the system (using any of the options)
Update: I was able to get KFFirstAide to complete it's recover using 8.1.2 option. I got a full red screen then it booted to the Fastboot Mode Screen. I feel I'm getting closer. I held the power button for 20 seconds, then release for 5 and power up again. It's still going into Fastboot Mode. Any advice?
Click to expand...
Click to collapse
A red screen is not good. Try Kindle Fire HD System Restore Tool http://forum.xda-developers.com/showthread.php?t=2011126
Sent from my Amazon Kindle Fire HD running CM 11 KitKat 4.4 using xda app-developers
LinearEquation said:
A red screen is not good. Try Kindle Fire HD System Restore Tool http://forum.xda-developers.com/showthread.php?t=2011126
Sent from my Amazon Kindle Fire HD running CM 11 KitKat 4.4 using xda app-developers
Click to expand...
Click to collapse
Appreciate the help. I tried that recovery tool a few times. Just curious, which option should be selected in that tool? I think I tried them all already, but which one should be used to completely restore? Option 1 enables fastboot (got plenty of that...lol). Option 2 restores SU. Option 3 restores SU and other stuff i don't recognize. Option 4 had google stuff I don't recognize. But I did try all of them.
Okay starting off with this is the tutorial I was using: rootkindlefire . com/kindle-fire-root/how-to-root-convert-kindle-fire-hd-8-9-into-pure-android-tablet and I like a lot of people in the linked youtube comments (which I stupidly didn't read before trying, yes I am aware that was stupid) am stalled after step 20. But my kindle fire HD doesn't seem to have TWRP because it turned on and the kindle fire logo is still orange. It didn't go to blue like most of the other peoples did.
Can someone please help me to either undo my mess or help me get past this block? I wasn't able to find any help in the comments or a related thread on here.
I think it's stuck in fastboot but I can't get it to go into recovery so I'm not sure.
It's not in fastboot, its just hung on the boot loader. If you have never installed the fastboot driver before I reccomend fixing this partially from Linux, your device will be detected briefly when its first turned on as a fastboot device, but it's a pain to try to install the drivers in that brief moment on windows. It is way easier to get it into fastboot from and Ubuntu live CD by installing fastboot from the software center on a Ubuntu 13.10 live CD, and then running this with the kindle unplugged and off:
Code:
fastboot -i 0x1949 getvar product
Then after it says waiting for device, plug the kindle on and wait for the device to say fastboot, from there you can boot back into windows and use kindle fire first aid to restore.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
It's not in fastboot, its just hung on the boot loader. If you have never installed the fastboot driver before I reccomend fixing this partially from Linux, your device will be detected briefly when its first turned on as a fastboot device, but it's a pain to try to install the drivers in that brief moment on windows. It is way easier to get it into fastboot from and Ubuntu live CD by installing fastboot from the software center on a Ubuntu 13.10 live CD, and then running this with the kindle unplugged and off:
Code:
fastboot -i 0x1949 getvar product
Then after it says waiting for device, plug the kindle on and wait for the device to say fastboot, from there you can boot back into windows and use kindle fire first aid to restore.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
I'm glad to know I didn't break it haha. Thanks for the advice.
stunts513 said:
It's not in fastboot, its just hung on the boot loader. If you have never installed the fastboot driver before I reccomend fixing this partially from Linux, your device will be detected briefly when its first turned on as a fastboot device, but it's a pain to try to install the drivers in that brief moment on windows. It is way easier to get it into fastboot from and Ubuntu live CD by installing fastboot from the software center on a Ubuntu 13.10 live CD, and then running this with the kindle unplugged and off:
Code:
fastboot -i 0x1949 getvar product
Then after it says waiting for device, plug the kindle on and wait for the device to say fastboot, from there you can boot back into windows and use kindle fire first aid to restore.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Hello,
I have found myself stuck in the same situation. I have the fastboot drivers installed and I can get into fastboot using your command. My question is about the version I have and the available restore versions.
I have the 8.4.6 software version. and I see in first aide that the newest for the HD 8.9 is 8.2.4.
I got stuck after a root attempt, the exploit worked but the files didn't install properly it seems. when I rebooted I just get stuck at the Kindle Fire screen no animation?
Any idea if it is safe to restore 8.2.4 on a 8.4.6 device? In uncertain if downgraded are safe.
Downgrades are perfectly safe, go for it.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Cool thanks man, just wanted to know if there were any big don'ts before I try the downgrade.
I'll give it a go tonight after dinner.
Stupid me used the old KFFA from the rooting thread to try and root (may or may not have been the issue). I have the latest now all ready to go for the restore attempt.
Sent from my HTCONE using Tapatalk
I have a kindle fire HD 8.9, where a system framework file was edited and turns out to be bad.
When i try to boot it fails and defaults to recovery where i have two options, to reboot, or wipe data (which i have done extensively). I want to flash a full brand new system image to get the kindle like new, (note: It was on system 8.4.6 i believe) so that i can go the road of android. If possible, please leave a way to revert to an old system version.
Also, this cannot be recognized in fastboot because it boots straight to the recovery when given the fastboot command to boot to fastboot.
Much thanks.
@Hashcode (I figure youd be able to help the most)
michaelg117 said:
I have a kindle fire HD 8.9, where a system framework file was edited and turns out to be bad.
When i try to boot it fails and defaults to recovery where i have two options, to reboot, or wipe data (which i have done extensively). I want to flash a full brand new system image to get the kindle like new, (note: It was on system 8.4.6 i believe) so that i can go the road of android. If possible, please leave a way to revert to an old system version.
Also, this cannot be recognized in fastboot because it boots straight to the recovery when given the fastboot command to boot to fastboot.
Much thanks.
@Hashcode (I figure youd be able to help the most)
Click to expand...
Click to collapse
the fastboot 0x1949 getvar product doesnt seem to work now, it just shows the charging sign
michaelg117 said:
the fastboot 0x1949 getvar product doesnt seem to work now, it just shows the charging sign
Click to expand...
Click to collapse
turn off the kindle, type the fastboot command, when it says "waiting", then plugin the kindle
This is always a pain, if you have never installed the fastboot driver you will have to install the driver when it briefly appears before that command will work, that's why this process is so much easier on Ubuntu 13.10. If you boot a live CD there's no drivers to install, you just need to run a few commands, 2 for the package manager then the fastboot command itself.
Sent from my Amazon Kindle Fire HD using Tapatalk
stunts513 said:
This is always a pain, if you have never installed the fastboot driver you will have to install the driver when it briefly appears before that command will work, that's why this process is so much easier on Ubuntu 13.10. If you boot a live CD there's no drivers to install, you just need to run a few commands, 2 for the package manager then the fastboot command itself.
Sent from my Amazon Kindle Fire HD using Tapatalk
Click to expand...
Click to collapse
I was able to do this with modded drivers when it popped up in device manager, after removing driver verification(stupid windows 8...) , then use one of the various tools to get into fastboot because for some reason the normal command wouldn't do the job, then i used yet another tool to revert to 8.1.4, and i am now happily running ParanoidAndroid
EDIT: Thanks for the drivers by the way!
I got the Kindle Fire 2 a few years ago as my first Android device. I stupidly used N2AOS (now PerfectlyAndroid.com) to install Cyanogenmod 10 (I think it was 10). After a while I got fed up with the bad battery life, so I tried to use their restore tool to go back to the Amazon ROM, but it failed somehow. Since then, the device will boot up to a Kindle Fire logo then a Fastboot screen with a red and green light blinking.
I've since become a lot more knowledgeable about how custom ROMs work, but I still can't find a way to fix this thing. ADB and Fastboot don't recognize it, even with the Amazon and generic drivers installed. There's only one button, so there's no real way to get into Fastboot that I can see. Recently, I decided to try and fix it again, and I picked up a Fastboot cable, but the device is still not recognized by Windows or Linux so it doesn't matter. Any ideas on how I can get a working recovery and Android installation on this thing?
Are you using the command "fastboot -i 0x1949 <insert command here> "? Since the Kindle Fire tablets aren't manufactured by Google, you have to put a custom USB id so it will be recognized by ADB/Fastboot.
Sent from my iPhone 4 using Tapatalk
[QRCODE][/QRCODE]
phiftyopz said:
Are you using the command "fastboot -i 0x1949 <insert command here> "? Since the Kindle Fire tablets aren't manufactured by Google, you have to put a custom USB id so it will be recognized by ADB/Fastboot.
Sent from my iPhone 4 using Tapatalk
Click to expand...
Click to collapse
Interesting, I hadn't tried that yet, but unsurprisingly it doesn't work. It just says waiting for device forever.
Bensonhurst said:
[QRCODE][/QRCODE]
Interesting, I hadn't tried that yet, but unsurprisingly it doesn't work. It just says waiting for device forever.
Click to expand...
Click to collapse
Which ADB drivers do you have installed? I have the official amazon ADB drivers which you can download through Android SDK. I have a kindle fire 2 and a kindle fire hd 8.9" and those are the only drivers that work with both devices. If you don't have those, I can tell you how to get them.
Sent from my iPhone 4 using Tapatalk
---------- Post added at 08:54 PM ---------- Previous post was at 08:04 PM ----------
phiftyopz said:
Which ADB drivers do you have installed? I have the official amazon ADB drivers which you can download through Android SDK. I have a kindle fire 2 and a kindle fire hd 8.9" and those are the only drivers that work with both devices. If you don't have those, I can tell you how to get them.
Sent from my iPhone 4 using Tapatalk
Click to expand...
Click to collapse
If you don't have the official drivers, here's how you get them:
Let's start by uninstalling the drivers you already have.
1. For Windows 7 or newer, open your start menu and type "device manager" and press enter. For Windows XP, open your start menu and open control panel and switch to classic view. Select device manager. If you have your Kindle connected, it should show up as "ADB Composite Interface" or something along those lines.
2. Right-click your Kindle and select "Uninstall". If it shows up as otter2, then you don't have the ADB drivers installed.
3. Disconnect your Kindle.
Now, let's install the official drivers.
1. Install Android SDK. Link: https://developer.android.com/sdk/index.html#Other (Download the zip)
2. Extract the zip to your desktop.
3. Open SDK Manager.exe and once it loads, select Tools and Manage Add-On Sites then select User Defined Sites.
4. Click New and put this in the box: https://s3.amazonaws.com/android-sdk-manager/resist/addon.xml
5. Scroll down and select Kindle Fire USB Driver
6. Click Install x Packages (x being the number of packages you have selected) and wait for it to finish downloading.
7. Close SDK Manager and go to the extras folder then amazon then kindle_fire_USB_driver and then run KindleDrivers.exe. Wait for it to finish.
8. Open device manager and right click your kindle and select Update drivers and browse my computer and pick from a list of drivers
9. Select ADB Composite Interface and click next. It will pop up with a warning saying Windows can't verify that its compatible with your device. Just click yes to install it.
10. You should be able to use fastboot or ADB now.
If something goes wrong, tell me what step you were on and what went wrong and I will try to fix it.
Sent from my Kindle Fire HD 8.9" using Tapatalk
phiftyopz said:
Which ADB drivers do you have installed? I have the official amazon ADB drivers which you can download through Android SDK. I have a kindle fire 2 and a kindle fire hd 8.9" and those are the only drivers that work with both devices. If you don't have those, I can tell you how to get them.
Sent from my iPhone 4 using Tapatalk
---------- Post added at 08:54 PM ---------- Previous post was at 08:04 PM ----------
If you don't have the official drivers, here's how you get them:
Let's start by uninstalling the drivers you already have.
1. For Windows 7 or newer, open your start menu and type "device manager" and press enter. For Windows XP, open your start menu and open control panel and switch to classic view. Select device manager. If you have your Kindle connected, it should show up as "ADB Composite Interface" or something along those lines.
2. Right-click your Kindle and select "Uninstall". If it shows up as otter2, then you don't have the ADB drivers installed.
3. Disconnect your Kindle.
Now, let's install the official drivers.
1. Install Android SDK. Link:
2. Extract the zip to your desktop.
3. Open SDK Manager.exe and once it loads, select Tools and Manage Add-On Sites then select User Defined Sites.
4. Click New and put this in the box:
5. Scroll down and select Kindle Fire USB Driver
6. Click Install x Packages (x being the number of packages you have selected) and wait for it to finish downloading.
7. Close SDK Manager and go to the extras folder then amazon then kindle_fire_USB_driver and then run KindleDrivers.exe. Wait for it to finish.
8. Open device manager and right click your kindle and select Update drivers and browse my computer and pick from a list of drivers
9. Select ADB Composite Interface and click next. It will pop up with a warning saying Windows can't verify that its compatible with your device. Just click yes to install it.
10. You should be able to use fastboot or ADB now.
If something goes wrong, tell me what step you were on and what went wrong and I will try to fix it.
Sent from my Kindle Fire HD 8.9" using Tapatalk
Click to expand...
Click to collapse
I'm already using the Amazon drivers from the SDK, and I've already tried the generic Android ADB drivers. Same result. Both with and without drivers installed, it shows up as Otter2-Prod4 in the device manager, under "other devices".
Bensonhurst said:
I'm already using the Amazon drivers from the SDK, and I've already tried the generic Android ADB drivers. Same result. Both with and without drivers installed, it shows up as Otter2-Prod4 in the device manager, under "other devices".
Click to expand...
Click to collapse
That means the drivers aren't installed correctly. Reinstall them.
Sent from my Kindle Fire HD 8.9" using Tapatalk
phiftyopz said:
That means the drivers aren't installed correctly. Reinstall them.
Sent from my Kindle Fire HD 8.9" using Tapatalk
Click to expand...
Click to collapse
I've done the steps again carefully, but ADB Composite Interface doesn't appear in the list of available driver types in Device Manager. There is an entry for Android USB Devices, but it only includes HTC Devices, presumably because I've used a One M8 with this computer in the past.
Bensonhurst said:
I've done the steps again carefully, but ADB Composite Interface doesn't appear in the list of available driver types in Device Manager. There is an entry for Android USB Devices, but it only includes HTC Devices, presumably because I've used a One M8 with this computer in the past.
Click to expand...
Click to collapse
Try to uninstall your HTC drivers temporarily, as those drivers may be conflicting with the Kindle drivers
Sent from my iPhone 4 using Tapatalk
phiftyopz said:
Try to uninstall your HTC drivers temporarily, as those drivers may be conflicting with the Kindle drivers
Sent from my iPhone 4 using Tapatalk
Click to expand...
Click to collapse
Any idea how I would do that? I don't have the HTC phone anymore and nothing HTC-related shows up under Programs and Features in Windows.
Bensonhurst said:
Any idea how I would do that? I don't have the HTC phone anymore and nothing HTC-related shows up under Programs and Features in Windows.
Click to expand...
Click to collapse
For why it would conflict with your Kindle drivers, some devices have similar device definitions, so your computer might be thinking that your Kindle is your old HTC device.
For you not having the HTC device anymore, I don't know how HTC drivers are installed, so I can't really tell you how to manually uninstall them. Try searching online how to uninstall them manually.
Sent from my Kindle Fire HD 8.9" using Tapatalk
phiftyopz said:
For why it would conflict with your Kindle drivers, some devices have similar device definitions, so your computer might be thinking that your Kindle is your old HTC device.
For you not having the HTC device anymore, I don't know how HTC drivers are installed, so I can't really tell you how to manually uninstall them. Try searching online how to uninstall them manually.
Sent from my Kindle Fire HD 8.9" using Tapatalk
Click to expand...
Click to collapse
It worked! Fastboot detects the device as 6F12000600000001!
Unfortunately the TWRP site seems to be down right now, so I can't act on it, but thank you so much for the help.
Bensonhurst said:
It worked! Fastboot detects the device as 6F12000600000001!
Unfortunately the TWRP site seems to be down right now, so I can't act on it, but thank you so much for the help.
Click to expand...
Click to collapse
No problem! Always glad to help!
Sent from my Kindle Fire HD 8.9" using Tapatalk
phiftyopz said:
No problem! Always glad to help!
Sent from my Kindle Fire HD 8.9" using Tapatalk
Click to expand...
Click to collapse
Well, TWRP.me is up again, but it seems like they don't actually have a build for otter2. I found a blog here: http://tipsstrips.blogspot.com/2015/02/install-twrp-on-amazon-kindle-fire-2nd.html
with an old download for a TWRP build for it as well as a bootloader and boot image, but when I flash them with fastboot as decribed, it says that the flash succeeded but the Kindle still only displays the Fastboot screen with the blinking light. Any ideas?
Have you tried using fastboot -i 0x1949 oem recovery?
Sent from my iPhone 4 using Tapatalk
phiftyopz said:
Have you tried using fastboot -i 0x1949 oem recovery?
Sent from my iPhone 4 using Tapatalk
Click to expand...
Click to collapse
Yes, it just reboots to the same Fastboot screen.
Bensonhurst said:
Yes, it just reboots to the same Fastboot screen.
Click to expand...
Click to collapse
There is the option to reset boot options from the second bootloader, but from what you're saying it's just booting straight to fastboot mode... Try and flash the stock partitions back on your Kindle and then see what happens.
Sent from my iPhone 4 using Tapatalk
phiftyopz said:
There is the option to reset boot options from the second bootloader, but from what you're saying it's just booting straight to fastboot mode... Try and flash the stock partitions back on your Kindle and then see what happens.
Sent from my iPhone 4 using Tapatalk
Click to expand...
Click to collapse
Any idea where I can find a stock image? I don't remember backing it up when I initially used N2AOS over 3 years ago.
Accually, try this: fastboot -i 0x1949 oem idme bootmode 1
Some people have said that this fixes the problem of booting to recovery/fastboot right away
Just as a disclaimer, that command I gave you is VERY powerful and might mess up your Kindle even more than it already is, so I'm not responsible if doing that command permanently bricks your Kindle, you are the one responsible since you were the one that decided to go through with issuing this command...
Let's cross our fingers and hope that this works!
Sent from my iPhone 4 using Tapatalk
phiftyopz said:
Accually, try this: fastboot -i 0x1949 oem idme bootmode 1
Some people have said that this fixes the problem of booting to recovery/fastboot right away
Just as a disclaimer, that command I gave you is VERY powerful and might mess up your Kindle even more than it already is, so I'm not responsible if doing that command permanently bricks your Kindle, you are the one responsible since you were the one that decided to go through with issuing this command...
Sent from my iPhone 4 using Tapatalk
Click to expand...
Click to collapse
I ran it because I'm not too concerned about losing this thing since it's been nonfunctional for a long time.
The command finished and nothing happened. I tried rebooting and running fastboot -i 0x1949 oem recovery and it still just boots to the Fastboot screen.
Bensonhurst said:
I ran it because I'm not too concerned about losing this thing since it's been nonfunctional for a long time.
The command finished and nothing happened. I tried rebooting and running fastboot -i 0x1949 oem recovery and it still just boots to the Fastboot screen.
Click to expand...
Click to collapse
Well... I don't really know where you can get backups of the stock partitions. If you had a Kindle Fire HD 8.9", that would be a different story, as I still have my backups of the stock partitions. Try to search around for tools to restore your Kindle, or even better, the stock partitions themselves.
Sent from my iPhone 4 using Tapatalk
So i been trying to find the answer to my issue everywhere. everything i try fails.
So basically my Kindle fire hd 8.9 is in a constant boot loop. it goes from orange w/animation, then blue w/animation... then after a period of time it says that it cant boot gives me option to factory restore (which does nothing).
when i have it hooked up to a computer, it connects for 1 second, then quickly disconnects. In device manager it comes up as "jem-pvt-prod-04" with the yellow "!". i even tried to use the amazon drivers from another post on xda, in that split second it would appear in device manager, i would update device and point it to the driver. then i will get an error saying it encountered an error installing Android ADB interface. problem encountered while trying to add driver.
Does anyone have any tips for me. im kinda stuck here and desperate with a very expensive paperweight. very upsetting!
I never tried to root, or mod this kindle fire. this problem happened on its own. or possibly after an update of some sort.
thanks guys.
piffdaddy420 said:
So i been trying to find the answer to my issue everywhere. everything i try fails.
So basically my Kindle fire hd 8.9 is in a constant boot loop. it goes from orange w/animation, then blue w/animation... then after a period of time it says that it cant boot gives me option to factory restore (which does nothing).
when i have it hooked up to a computer, it connects for 1 second, then quickly disconnects. In device manager it comes up as "jem-pvt-prod-04" with the yellow "!". i even tried to use the amazon drivers from another post on xda, in that split second it would appear in device manager, i would update device and point it to the driver. then i will get an error saying it encountered an error installing Android ADB interface. problem encountered while trying to add driver.
Does anyone have any tips for me. im kinda stuck here and desperate with a very expensive paperweight. very upsetting!
I never tried to root, or mod this kindle fire. this problem happened on its own. or possibly after an update of some sort.
thanks guys.
Click to expand...
Click to collapse
You're not hopelessly bricked if your Kindle still boots to the orange logo.
Might I ask what Windows version you're using? Newer versions enforce driver signatures, and that enforcement will cause failed installations in Windows 8+ unless you disable the enforcement before installing the drivers. I would also suggest installing ADB and fastboot if you haven't already done so. (Use the 15 second ADB installer - it's on XDA, and it works wonders!)
Sent from my Amazon Jem using XDA Labs
monster1612 said:
You're not hopelessly bricked if your Kindle still boots to the orange logo.
Might I ask what Windows version you're using? Newer versions enforce driver signatures, and that enforcement will cause failed installations in Windows 8+ unless you disable the enforcement before installing the drivers. I would also suggest installing ADB and fastboot if you haven't already done so. (Use the 15 second ADB installer - it's on XDA, and it works wonders!)
Sent from my Amazon Jem using XDA Labs
Click to expand...
Click to collapse
Yes, actually i am using windows 10. My thinkpad has windows 7, so i will try to do this using windows 7. i will post back with results. its funny, out of everywhere i looked nobody mentioned windows 8+ having to disable enforcement. actually it will probably just be easier just to disable the enforcement. ill give it a try and report back.
still no luck. i was able to install the driver. but it still does the same thing. only connects for 1 second when i first turn it on. idk where to go from here? any suggestions?
piffdaddy420 said:
still no luck. i was able to install the driver. but it still does the same thing. only connects for 1 second when i first turn it on. idk where to go from here? any suggestions?
Click to expand...
Click to collapse
Completely turn off the kindle and unplug it from your PC if it's connected. Open Command Prompt and type fastboot -i 0x1949 getvar product. Plug in the kindle when you see <waiting for device> outputted. The kindle should now boot into fastboot mode, from which point you can reflash the bootloader, TWRP, and the freedom-boot image in Hashcode's thread.
Sent from my Amazon Jem using XDA Labs
monster1612 said:
Completely turn off the kindle and unplug it from your PC if it's connected. Open Command Prompt and type fastboot -i 0x1949 getvar product. Plug in the kindle when you see <waiting for device> outputted. The kindle should now boot into fastboot mode, from which point you can reflash the bootloader, TWRP, and the freedom-boot image in Hashcode's thread.
Sent from my Amazon Jem using XDA Labs
Click to expand...
Click to collapse
ok so im in fastboot mode now. i checked out that thread that you sent. but i have another problem, how am i supposed to get cm and gapps onto the kindle? is there a command i can use to put the files on the internal sd card? and i cant do the adb commands to push the stack, and do the other commands adb since i couldnt get it loaded to begin with, i am not able to enable developer mode. it would be nice if i could do those commands in fastboot mode. there has to be a way to do this....
maybe if someone can send me the stock partitions that they backed up stock boot partititons when they did it. maybe if i flashed them onto my kindle it will allow me to get it to atleast boot up so i can get into adb.
right now this is completely bricked.
can anyone help me? i just need the original boot loader, boot, recovery... basically whatever was backed up before you flashed it.
i aam looking for the original because i know mine was corrupt to begin with. my theory is if i load the original boot loaders and everything then maybe i can get into the kindle just so i can run the abd commands and then put cyanogenmod on it. unless someone has a suggestion on how i can get my device to be detected by adb ? the furthest i can get into is fastboot.
piffdaddy420 said:
can anyone help me? i just need the original boot loader, boot, recovery... basically whatever was backed up before you flashed it.
i aam looking for the original because i know mine was corrupt to begin with. my theory is if i load the original boot loaders and everything then maybe i can get into the kindle just so i can run the abd commands and then put cyanogenmod on it. unless someone has a suggestion on how i can get my device to be detected by adb ? the furthest i can get into is fastboot.
Click to expand...
Click to collapse
Once you're in fastboot, you should run these fastboot commands (most of which I ripped from Hashcode's thread) to flash the bootloader, etc.:
fastboot -i 0x1949 flash bootloader kfhd8-u-boot-prod-8.1.4.bin
fastboot -i 0x1949 flash boot kfhd8-freedom-boot-8.4.6.img
fastboot -i 0x1949 flash recovery kfhd8-twrp-2.8.7.0-recovery.img
fastboot -i 0x1949 oem recovery
after that, you should be in TWRP, from which point you can use ADB sideload (enable in TWRP through Advanced -> ADB sideload) to flash CM. After running ADB sideload, you need to re-enable it in TWRP for each subsequent zip you want to flash.
Sent from my Amazon Jem using XDA Labs
monster1612 said:
Once you're in fastboot, you should run these fastboot commands (most of which I ripped from Hashcode's thread) to flash the bootloader, etc.:
fastboot -i 0x1949 flash bootloader kfhd8-u-boot-prod-8.1.4.bin
fastboot -i 0x1949 flash boot kfhd8-freedom-boot-8.4.6.img
fastboot -i 0x1949 flash recovery kfhd8-twrp-2.8.7.0-recovery.img
fastboot -i 0x1949 oem recovery
after that, you should be in TWRP, from which point you can use ADB sideload (enable in TWRP through Advanced -> ADB sideload) to flash CM. After running ADB sideload, you need to re-enable it in TWRP for each subsequent zip you want to flash.
Sent from my Amazon Jem using XDA Labs
Click to expand...
Click to collapse
Yes, i did all of those steps, however i never did the final step the oem recovery one...
everytime i try it now the screen turns completely red and stays there.
piffdaddy420 said:
Yes, i did all of those steps, however i never did the final step the oem recovery one...
everytime i try it now the screen turns completely red and stays there.
Click to expand...
Click to collapse
That's going to be a problem... hold down the Kindle till it completely powers off. Then open command prompt, type fastboot -i 0x1949 getvar product , and plug in the Kindle when you see <waiting for device>. Does this get you into fastboot mode?
Sent from my Amazon Jem using XDA Labs
monster1612 said:
That's going to be a problem... hold down the Kindle till it completely powers off. Then open command prompt, type fastboot -i 0x1949 getvar product , and plug in the Kindle when you see <waiting for device>. Does this get you into fastboot mode?
Sent from my Amazon Jem using XDA Labs
Click to expand...
Click to collapse
yes it does
piffdaddy420 said:
yes it does
Click to expand...
Click to collapse
It sounds like you've got a newer bootloader that's been patched. Go ahead and download the files from Hashcode's thread, and type in all of the commands exactly as given in step 5. Those should fix the red screen issue and allow you to boot normally (or into TWRP, from which point you can ADB sideload CM).
Sent from my Amazon Jem using XDA Labs
monster1612 said:
It sounds like you've got a newer bootloader that's been patched. Go ahead and download the files from Hashcode's thread, and type in all of the commands exactly as given in step 5. Those should fix the red screen issue and allow you to boot normally (or into TWRP, from which point you can ADB sideload CM).
Sent from my Amazon Jem using XDA Labs
Click to expand...
Click to collapse
i followed that exact, i tried it a couple times before you even mentioned it. but i did it again, i redownloaded everything and did it again. just to be sure. but it still continues to do the same thing with the red screen. it goes from kindlefire for 2 seconds then red screen comes across it and stays red. idk what to do. i am so upset.
piffdaddy420 said:
i followed that exact, i tried it a couple times before you even mentioned it. but i did it again, i redownloaded everything and did it again. just to be sure. but it still continues to do the same thing with the red screen. it goes from kindlefire for 2 seconds then red screen comes across it and stays red. idk what to do. i am so upset.
Click to expand...
Click to collapse
Do you happen to have any stock OS backups? If you do, you should remain able to flash those over fastboot.
Sent from my Amazon Jem using XDA Labs
monster1612 said:
Do you happen to have any stock OS backups? If you do, you should remain able to flash those over fastboot.
Sent from my Amazon Jem using XDA Labs
Click to expand...
Click to collapse
no, i wish i did. the whole reason i started trying this was because the kindle was in a bootloop without even trying to flash it. it would go from kindlefire (orange) then blue, then it will ask me to do factory reset. and nomatter what i did i would keep going in the same bootloop.
so i turned to here for help, and following instructions now i am in this situation.
unfortunatley since i wasnt able to get into the kindle, i was never able to do any abd backups. so i just took my chances with it.
i was actually originally asking if anyone had the original files they can send me so i can try to flash those. atleast i can get it up and running because i really have a feeling this isnt working because i need to push the stack file over thru abd first.
piffdaddy420 said:
no, i wish i did. the whole reason i started trying this was because the kindle was in a bootloop without even trying to flash it. it would go from kindlefire (orange) then blue, then it will ask me to do factory reset. and nomatter what i did i would keep going in the same bootloop.
so i turned to here for help, and following instructions now i am in this situation.
unfortunatley since i wasnt able to get into the kindle, i was never able to do any abd backups. so i just took my chances with it.
i was actually originally asking if anyone had the original files they can send me so i can try to flash those. atleast i can get it up and running because i really have a feeling this isnt working because i need to push the stack file over thru abd first.
Click to expand...
Click to collapse
You should be able to separately flash the system.img, boot, and recovery from this tool via fastboot. It's stock OS 8.1.4, but it should work.
monster1612 said:
You should be able to separately flash the system.img, boot, and recovery from this tool via fastboot. It's stock OS 8.1.4, but it should work.
Click to expand...
Click to collapse
ok, it provided me with all the files except the bootloader. i did it step by step... but it only gave me original recovery, and original boot.img but it didnt give me the bootloader (and yes it is still turning red)
piffdaddy420 said:
ok, it provided me with all the files except the bootloader. i did it step by step... but it only gave me original recovery, and original boot.img but it didnt give me the bootloader (and yes it is still turning red)
Click to expand...
Click to collapse
anyone have any suggestions or can help me with my situation?? i am wondering if maybe someone could just send me the original backed up bootloader, boot, and recovery. i tried the original ones that were posted with that srt file. but it included everything but the bootloader. which is what i need. i know that in original thread they recommended to back up your original files (i was unable to do so because my kindle woulnt boot so i couldnt use adb to back up these files).
so if someone on here can send me the original files so i can try to get my kindle booted back up. that so far is my only theory because i tried everything else. i know people with advance knowledge would be able to help me in a heartbeat. any devs out there wanna help me out? i would greatly appreciate it!
anyone?