JB ROMs from KK - Huawei Ascend P6, Mate

I have a really strange issue, I'm on KK with TWRP 2.7.0.0 installed. All KK based ROMs are working perfectly without any problems. But when I try to install TWRP for JB (Issue was also there when I was on B125 with this unlock code) or a JB based Custom ROM my phone vibrates all the time and I'm unable to do anything with it. My thoughts of this is that my phone is still kinda locked on JB but unlocked on KK, so for a completly working JB ROM I would have to downgrade to B118 or B120 right? But now I found a Custom ROM based on JB that works on my device its MIUI V5 by @greatslon ! And I'm wondering why this is working but all others don't, maybe anyone can help me a little bit :laugh:

Related

Camera Error

I recently flashed cm10.2.1 with twrp 2.6.3.4 and gapps-jb-20130813. When launching my camera I get this error(Camera Error, Can't connect to camera. Can anyone shed some light on how I can fix this issue?
Are you on jb firmware? Have you ever updated to kk firmware in the past? The firmware should match the rom. So if its a kk rom you need kk firmware, if its a jb rom you need jb firmware. Only thing i can think of, unless its just a known issue with the rom.
?
cmlusco said:
Are you on jb firmware? Have you ever updated to kk firmware in the past? The firmware should match the rom. So if its a kk rom you need kk firmware, if its a jb rom you need jb firmware. Only thing i can think of, unless its just a known issue with the rom.
Click to expand...
Click to collapse
Which kk gapps should I install and do i need to start over with a factor reset or will the previous version that i installed be obsolete after I install the correct version?

what again should I do?

I've been having this problems before and that is that no kitkat ROM's camera works in my t999 phone, I was in 4.1.1 bootloader before but upgraded to 4.3 bootloader using Mr Robinson's prerooted firmware but still when I installed any kitkat custom ROM, I still get the cannot connect to camera error. the camera works fine in the stock prerooted firmware. plz I really want to use these kitkat ROMs and also want to camera to be functional. any permanent solution will be appreciated.
i guese I can't go on with kitkat roms
dikachik1 said:
I've been having this problems before and that is that no kitkat ROM's camera works in my t999 phone, I was in 4.1.1 bootloader before but upgraded to 4.3 bootloader using Mr Robinson's prerooted firmware but still when I installed any kitkat custom ROM, I still get the cannot connect to camera error. the camera works fine in the stock prerooted firmware. plz I really want to use these kitkat ROMs and also want to camera to be functional. any permanent solution will be appreciated.
Click to expand...
Click to collapse
I guess am only left with the options of using only stock based t999 ROMs. I'll have to say bye bye to aoksp and cm ROMs.
Check the cm threads and ask there when you get up to 10 posts. A lot of people who might be familiar with it probably dont bother looking at anything but their roms thread.

[Q] WIFI problem !! :( E980 at&t

Facing wifi problem on every custom rom I installed on my LG optimus G pro..
Working perfect on stock based roms.. Anybody know whats the issue ? Using cwm 6..0.4.7 and new phillz touch recovery to install roms but facing same problem.. When phone take first boot after installation the wifi is working but after some hours or next reboot the wifi will no more working.. Found something in build.prop
ro.wifi,channels= "blank"
I put some values of channel in it but it wont work
Plz help me..
Sorry for bad english
zohaibkhan143 said:
Facing wifi problem on every custom rom I installed on my LG optimus G pro..
Working perfect on stock based roms.. Anybody know whats the issue ? Using cwm 6..0.4.7 and new phillz touch recovery to install roms but facing same problem.. When phone take first boot after installation the wifi is working but after some hours or next reboot the wifi will no more working.. Found something in build.prop
ro.wifi,channels= "blank"
I put some values of channel in it but it wont work
Plz help me..
Sorry for bad english
Click to expand...
Click to collapse
It's not unusual for that entry in the build.prop to be blank, and shouldn't cause issues. I think the default there should be '11 11', though having it blank should be fine (pretty certain).
> Working perfect on stock based rom
Which roms are you flashing that are giving you problems? Many of the e980 roms are bugged out in various ways, maybe it's just a quirk of the one(s) you flashed? I had a similar problem recently, wifi just would *not* stay enabled, would not behave. I don't remember which rom it was though; I flash too much.
You've flashed the Kitkat 20g modem, yes? If all else flails, you could always flash back to Kitkat stock and start over, that's guaranteed to tell you whether its a hardware or software problem (if it persists after that: hardward, got to be).
help
culot said:
It's not unusual for that entry in the build.prop to be blank, and shouldn't cause issues. I think the default there should be '11 11', though having it blank should be fine (pretty certain).
> Working perfect on stock based rom
Which roms are you flashing that are giving you problems? Many of the e980 roms are bugged out in various ways, maybe it's just a quirk of the one(s) you flashed? I had a similar problem recently, wifi just would *not* stay enabled, would not behave. I don't remember which rom it was though; I flash too much.
You've flashed the Kitkat 20g modem, yes? If all else flails, you could always flash back to Kitkat stock and start over, that's guaranteed to tell you whether its a hardware or software problem (if it persists after that: hardward, got to be).
Click to expand...
Click to collapse
thanks for reply
I installed cm11 cm12 blisspop v1.0 1.1 .12 1.3 all these roms got same problem that is wifi
I m on JB 4.1.2 stock e98010p a&t
there is no wifi bugs in these custon roms.. only me facing this issue in every custom rom... Can u give me the kitkat firmware link e98020g ? I m gonna flash that rom then I will root my device on KK then I will try to flash custom roms and tell you about results.. thanks
plz provide link..
sorry for bad english
zohaibkhan143 said:
thanks for reply
I installed cm11 cm12 blisspop v1.0 1.1 .12 1.3 all these roms got same problem that is wifi
I m on JB 4.1.2 stock e98010p a&t
there is no wifi bugs in these custon roms.. only me facing this issue in every custom rom... Can u give me the kitkat firmware link e98020g ? I m gonna flash that rom then I will root my device on KK then I will try to flash custom roms and tell you about results.. thanks
plz provide link..
sorry for bad english
Click to expand...
Click to collapse
Booyah: E980 20g Kitkat TOT.
Also, with Lollipop roms, I don't think any of them are totally stable or functionally 100% yet, so that's not a place to go if you want stuff to work. There's plenty of nice Kitkat roms like PAC-rom or Carbon-Rom is you want stability and want for your phone to work fully (but thats no fun! ).
help
culot said:
Booyah: E980 20g Kitkat TOT.
Also, with Lollipop roms, I don't think any of them are totally stable or functionally 100% yet, so that's not a place to go if you want stuff to work. There's plenty of nice Kitkat roms like PAC-rom or Carbon-Rom is you want stability and want for your phone to work fully (but thats no fun! ).
Click to expand...
Click to collapse
Ok bro thanks for helping me
zohaibkhan143 said:
Ok bro thanks for helping me
Click to expand...
Click to collapse
bro I installed stock Kk and root my device but I unable to install cusom recovery using freegee app.. Any other way to install custom recovery ?
culot said:
Booyah: E980 20g Kitkat TOT.
Also, with Lollipop roms, I don't think any of them are totally stable or functionally 100% yet, so that's not a place to go if you want stuff to work. There's plenty of nice Kitkat roms like PAC-rom or Carbon-Rom is you want stability and want for your phone to work fully (but thats no fun! ).
Click to expand...
Click to collapse
bro I installed stock Kk and root my device but I unable to install cusom recovery using freegee app.. Any other way to install custom recovery ?
zohaibkhan143 said:
bro I installed stock Kk and root my device but I unable to install cusom recovery using freegee app.. Any other way to install custom recovery ?
Click to expand...
Click to collapse
Yoink.
^-- Freegee never lets me in unless I flash the Sphinx GPro Recovery CWM recovery first. Once that is done, it's all good.
culot said:
Yoink.
^-- Freegee never lets me in unless I flash the Sphinx GPro Recovery CWM recovery first. Once that is done, it's all good.
Click to expand...
Click to collapse
Thanks I will try it soon..!
culot said:
Yoink.
^-- Freegee never lets me in unless I flash the Sphinx GPro Recovery CWM recovery first. Once that is done, it's all good.
Click to expand...
Click to collapse
Installed sucesfully but one problem in this cwm..external_sd mounting failed cwm ver 6.0.4.4
help plz
zohaibkhan143 said:
Installed sucesfully but one problem in this cwm..external_sd mounting failed cwm ver 6.0.4.4
help plz
Click to expand...
Click to collapse
Oh, no, you misunderstood: you don't use the CWM, you only install it and then quickly install *over* it with one of Freegee's recoveries. Never use the Sphinx CWM, as you'll get errors when you go to flash roms. You only insatll the Sphinx CWM so that Freegee will recognize your device and function, it's only a stepping stone to Freegee, not a recovery you should use on its own.
And, in light of recent developments on the TWRP 2.8 front, I'd say give that a try instead. It mounts your external SD just fine. THe only things I've flashed with it are BlissPop builds and Gapps, but all without an issue yet. Go for the one with the Play theme and enjoy its gorgeous colors.
Thanks buddy.. Freegee recognized my device and installed cwm succesfully
Sent from my LG-E980 using XDA Free mobile app
help
after kitkat update now I m installed those custom roms again but still there is a same wifi problem sick off totally !

[Q] urgent help needed for reverting the custom recovery to orignal samsung recovery

Hello Sir,
i have installed liquidsmooth lollipop 5.0 on Samsung sgh i747 but there are some problems in camera does not work so i want to change it but i don't want the custom rom.. I want the original one but unable to find it every link goes to some custom rom & i dont want them...i want the original one.........can i change the cynogenmod recovery to stock recovery.........
Reverting to stock recovery will not fix the camera problem.
What bootloader is on your phone? Don't flash anything until you confirm this because flashing the wrong ROM could brick your phone.
tupepratik9880 said:
Hello Sir,
i have installed liquidsmooth lollipop 5.0 on Samsung sgh i747 but there are some problems in camera does not work so i want to change it but i don't want the custom rom.. I want the original one but unable to find it every link goes to some custom rom & i dont want them...i want the original one.........can i change the cynogenmod recovery to stock recovery.........
Click to expand...
Click to collapse
You'll have to be a bit more precise, what device do you have exactly? What bootloaders? And what was your exact flashing process?
Like Audit mentioned, it's not a recovery problem. Most likely flashed something that wasn't for your device or your device wasn't updated for (like bootloaders) but could also just be a problem with the ROM or a dirty flash.
tupepratik9880 said:
Hello Sir,
i have installed liquidsmooth lollipop 5.0 on Samsung sgh i747 but there are some problems in camera does not work so i want to change it but i don't want the custom rom.. I want the original one but unable to find it every link goes to some custom rom & i dont want them...i want the original one.........can i change the cynogenmod recovery to stock recovery.........
Click to expand...
Click to collapse
Are you wanting a stock rom and stock recovery? Or, just the stock (original) recovery?
What you do depends on your answer to Audit13's question about your current bootloader and modem.
Lollipop ROMs as a group have had camera and video issues. Some third party camera apps have been working for two months. Following some CyanogenMod threads has had the stock camera intermittently working and then not working on subsequent updates for the past several weeks. Yesterday I read that the source of the problem was found in AOSP code. Supposedly camera issues will be fixed with the next update.

I want to update my rom. Using stock now. Which rom to install?

Hi. I have note 2 n7100 with stock rom kitkat 4.4.2 and after we screen that an oficcial update from samsung doesn't Come. I want to update with another rom
I am a regular user. Don't want or need too much. Just updated rom. Prefer marshmelo that work working good with no problems and with easy install..
Which rom is compatible for me?
Blisspop Marshmallow! I am using it for some days now and its very stable and running on Android 6.0.1.
Its based on the CM rom. Do why not use the CM?
shalom_hadad said:
Hi. I have note 2 n7100 with stock rom kitkat 4.4.2 and after we screen that an oficcial update from samsung doesn't Come. I want to update with another rom
I am a regular user. Don't want or need too much. Just updated rom. Prefer marshmelo that work working good with no problems and with easy install..
Which rom is compatible for me?
Click to expand...
Click to collapse
Try Eclipse V5 if you want a TW rom. I am using it. I just flash it two weeks ago. I also on stock 4.4.2 before this. First time flashing. Never knowing soo much about rom and other stuff. Make sure you read a lot before flashing. Most of the instruction can get online. Although V6 is out, but i still stick with V5. Most V5 info can get from "[ROM][GT-N7100][TW 4.4.4] Eclipse By AC" under "Galaxy Note II Original Android Development". Happy flashing.
akuma238 said:
Try Eclipse V5 if you want a TW rom. I am using it. I just flash it two weeks ago. I also on stock 4.4.2 before this. First time flashing. Never knowing soo much about rom and other stuff. Make sure you read a lot before flashing. Most of the instruction can get online. Although V6 is out, but i still stick with V5. Most V5 info can get from "[ROM][GT-N7100][TW 4.4.4] Eclipse By AC" under "Galaxy Note II Original Android Development". Happy flashing.
Click to expand...
Click to collapse
But its still based on kitkat.. I want to update..
shalom_hadad said:
Hi. I have note 2 n7100 with stock rom kitkat 4.4.2 and after we screen that an oficcial update from samsung doesn't Come. I want to update with another rom
I am a regular user. Don't want or need too much. Just updated rom. Prefer marshmelo that work working good with no problems and with easy install..
Which rom is compatible for me?
Click to expand...
Click to collapse
i have been using android version 5.1.1 based on CM 12.1 by ivan meler and i have been using this phone with this rom for the past two months , it's development has been completed that means it is the most finished version with literally 0 bug or lags and i must say i didn't expected this kind of performance at all ... this made me revert back to my note from my iphone 6 (you can imagine the smoothness of this rom) i would not recommend you marshmallow based roms becasue about 20 days i tried one and it had issue so if you use this device as a daily driver i would say go for 5.1.1 roms instead and CM 13&MM is still in development phase that means developers are still making it worthy .
you can hit the thanks button if i helped if anyhow .. if you need any noob friendly guide on how to root and install custom roms you can always ask me .. and there are quite of few tutorials on xda a well as Youtube
shalom_hadad said:
Its based on the CM rom. Do why not use the CM?
Click to expand...
Click to collapse
Yes it's based on CM but I tested some Marshmallow Roms and this ROM is really good.
Try Ivan Meler's Cyanogenmod 13 Rom ( Android 6.0.1 Marshmallow).
It´s pretty stable and i had no problems until build 6.
Wirth build 7 there is a problem with bluetooth for some people.
CharlyNet said:
Try Ivan Meler's Cyanogenmod 13 Rom ( Android 6.0.1 Marshmallow).
It´s pretty stable and i had no problems until build 6.
Wirth build 7 there is a problem with bluetooth for some people.
Click to expand...
Click to collapse
When its came stable?.. In approx..
I am need something with out problems
And it's easy to install this rom on stock? Need odin?
shalom_hadad said:
When its came stable?.. In approx..
I am need something with out problems
And it's easy to install this rom on stock? Need odin?
Click to expand...
Click to collapse
All the custom ROMs (not Samsung official) must be installed with a custom recovery like TWRP or ClockworkMod. The custom recovery can be installed with Odin.
I have been like a month with CM13 and I had no problems, but if you want a stable ROM, install an older one like CM12.1 aka Lollipop.
CharlyNet said:
All the custom ROMs (not Samsung official) must be installed with a custom recovery like TWRP or ClockworkMod. The custom recovery can be installed with Odin.
I have been like a month with CM13 and I had no problems, but if you want a stable ROM, install an older one like CM12.1 aka Lollipop.
Click to expand...
Click to collapse
OK. And how it's update?
From 12 to 13 When will be stable. Need again flash and wipe or OTA update?
Try Dr. Ketan's kit Kat, N3, N4 and S5 features. Truly superb. Great battery life, Viper FX for sound. Stable. Tried many but always come back to this one.
Sent from my GT-N7100 using Tapatalk 4

Categories

Resources