Develop Bugs

[Q] How to unlock SGH-i747m

How do I unlock the phone? I currently have Cm11 on it.
I want to ditch rogers (terrible service) so what do I need to do to unlock it?
side note, when I got the phone it was via future-shop warranty and they gave me a fido version and put my rogers sim in it, did they unlock it then?

SpacePotato said:
How do I unlock the phone? I currently have Cm11 on it.
I want to ditch rogers (terrible service) so what do I need to do to unlock it?
side note, when I got the phone it was via future-shop warranty and they gave me a fido version and put my rogers sim in it, did they unlock it then?
Click to expand...
Click to collapse
Since Fido is really owned by Rogers, your Rogers SIM may work in the phone if it was originally locked to Fido. To check whether it's unlocked or not, try putting in a non-compatible SIM (like Bell or Telus) and see whether it prompts you for an unlock code. If it does, you would need to purchase a code online or request one from the carrier. If it wasn't on Android 4.3 prior to the CM11 installation, you may be able to install stock Android 4.1.1 and free unlock. Either way, whether you are free unlocking or using an unlock code, you have to be on a stock ROM for it work. You can check your phone's settings and see what baseband and bootloader versions you have. This will tell us know whether you should flash stock 4.1.1 or 4.3

Larry2999 said:
Since Fido is really owned by Rogers, your Rogers SIM may work in the phone if it was originally locked to Fido. To check whether it's unlocked or not, try putting in a non-compatible SIM (like Bell or Telus) and see whether it prompts you for an unlock code. If it does, you would need to purchase a code online or request one from the carrier. If it wasn't on Android 4.3 prior to the CM11 installation, you may be able to install stock Android 4.1.1 and free unlock. Either way, whether you are free unlocking or using an unlock code, you have to be on a stock ROM for it work. You can check your phone's settings and see what baseband and bootloader versions you have. This will tell us know whether you should flash stock 4.1.1 or 4.3
Click to expand...
Click to collapse
Baseband is I747MVLUEMK5 bootloader I have no idea, I just used odin to flash CWM.
I'm open to flashing 4.1 to get a free unlock then going back to CM11

SpacePotato said:
Baseband is I747MVLUEMK5 bootloader I have no idea, I just used odin to flash CWM.
I'm open to flashing 4.1 to get a free unlock then going back to CM11
Click to expand...
Click to collapse
I747MVLUEMK5 is ver. 4.3 and you almost certainly have the 4.3 bootloader as well. With this, unfortunately, you can't downgrade to 4.1.1 where the free unlock option is available as any attempt to do this could brick your phone. You would need to request an unlock code from the carrier, if eligible, or purchase one online. There have been reports also that the unlock codes don't work when you are on a custom ROM so if you buy one online and it doesn't work, you will have to flash stock 4.3.

Larry2999 said:
I747MVLUEMK5 is ver. 4.3 and you almost certainly have the 4.3 bootloader as well. With this, unfortunately, you can't downgrade to 4.1.1 where the free unlock option is available as any attempt to do this could brick your phone. You would need to request an unlock code from the carrier, if eligible, or purchase one online. There have been reports also that the unlock codes don't work when you are on a custom ROM so if you buy one online and it doesn't work, you will have to flash stock 4.3.
Click to expand...
Click to collapse
ok, which carrier would I have to talk to, it was a fido phone as mentioned previously. Also is their a possibility I could downgrade to 4.1, or is it a guaranteed brick?

SpacePotato said:
ok, which carrier would I have to talk to, it was a fido phone as mentioned previously. Also is their a possibility I could downgrade to 4.1, or is it a guaranteed brick?
Click to expand...
Click to collapse
You would need to contact Fido since it was originally on their network. I'm afraid nobody has yet posted a method to allow you successfully downgrade to 4.1.1 and still preserve the free unlock functionality. You could follow some instructions posted in this forum to downgrade to 4.1.1. However, this wouldn't allow you downgrade the bootloader/modem which is required for the unlock.

Larry2999 said:
You would need to contact Fido since it was originally on their network. I'm afraid nobody has yet posted a method to allow you successfully downgrade to 4.1.1 and still preserve the free unlock functionality. You could follow some instructions posted in this forum to downgrade to 4.1.1. However, this wouldn't allow you downgrade the bootloader/modem which is required for the unlock.
Click to expand...
Click to collapse
ok thanks.

Larry2999 said:
I747MVLUEMK5 is ver. 4.3 and you almost certainly have the 4.3 bootloader as well. With this, unfortunately, you can't downgrade to 4.1.1 where the free unlock option is available as any attempt to do this could brick your phone. You would need to request an unlock code from the carrier, if eligible, or purchase one online. There have been reports also that the unlock codes don't work when you are on a custom ROM so if you buy one online and it doesn't work, you will have to flash stock 4.3.
Click to expand...
Click to collapse
I found a way to downgrade from 4.3 to 4.1.1 or 4.0.4 stock. (for Bell).
I bought and used Mobile Odin (available on the play store). Anyhow, it flashes the stock rom and not the old bootloaders. Once you're on 4.1.1 or 4.0.4 the problem is that *#197328640# no longer works. Basically when you type that ServiceMode comes up, but all the options are gone. I believe this is because they locked those features on the new bootloader (which is still on the phone after the Mobile Odin downgrade...)
Unlocking this phone has become a major pain in the ass.

htc_softbank said:
I found a way to downgrade from 4.3 to 4.1.1 or 4.0.4 stock. (for Bell).
I bought and used Mobile Odin (available on the play store). Anyhow, it flashes the stock rom and not the old bootloaders. Once you're on 4.1.1 or 4.0.4 the problem is that *#197328640# no longer works. Basically when you type that ServiceMode comes up, but all the options are gone. I believe this is because they locked those features on the new bootloader (which is still on the phone after the Mobile Odin downgrade...)
Unlocking this phone has become a major pain in the ass.
Click to expand...
Click to collapse
You are quite right. Sam and the networks are winning this time. You can indeed use Mobile Odin to downgrade the system (ROM). However, there hasn't been any reports of a successful downgrade of the bootloader. Therefore, even if you downgrade without bricking the phone, you can't free unlock. Tough but you will need a carrier unlock code.

[Q] Any way toSim Unlock Note 3 On 4.4.2 NB4??

n900t, already rooted.
I have tried regional unlock. NO Luck here.
I also tried flash back to MI7 modem( modem only). the phone shows unknown baseband and I try regional unlock again. Not luck.
Not I am back on NB4 modem.
Is there any way to sim unlock on android 4.4.2 NB4?
Thank you

laofan said:
n900t, already rooted.
I have tried regional unlock. NO Luck here.
I also tried flash back to MI7 modem( modem only). the phone shows unknown baseband and I try regional unlock again. Not luck.
Not I am back on NB4 modem.
Is there any way to sim unlock on android 4.4.2 NB4?
Thank you
Click to expand...
Click to collapse
Same here lock away did not help.

Region unlock does not work with kitkat, you'll need to use an online pay unlock service or if you meet requirements you can get it from t-mobile

louforgiveno said:
Region unlock does not work with kitkat, you'll need to use an online pay unlock service or if you meet requirements you can get it from t-mobile
Click to expand...
Click to collapse
Thanks, I found an unlock code on ebay for $30. seems like the only method to sim unlock kk note 3 for now

Has anyone tested going all the way back to JB via odin then using the chainfire method to sim unlock with success after taking the ota to KK?

[Q] How to determine which carrier I'm locked to when there are no bloatware apps?

I have a Canadian Bell S3 i747m which broke and I got some random guy to fix it for me. He frustratingly ended up installing a ROGERS circuit board(or so he says) without bothering to check the fact my phone was loaded with Bell bloatware or just asking me my carrier.
I now need to unlock the SIM in order to use it properly and I just want to be sure I have the correct information and I don't end up paying for an unlock code that will not work since I didn't provide the proper carrier.
My SIM card (not sure if that matters): BELL
My board/IMEI: ROGERS (Apparently)
I wanted to determine which carrier I was tied to but I see 0 bloatware in my phone which makes me think the guy is wrong/lying and it's not actually a Rogers board. Is there another way to determine which carrier my phone is tied to?

Cyclone112 said:
I have a Canadian Bell S3 i747m which broke and I got some random guy to fix it for me. He frustratingly ended up installing a ROGERS circuit board(or so he says) without bothering to check the fact my phone was loaded with Bell bloatware or just asking me my carrier.
I now need to unlock the SIM in order to use it properly and I just want to be sure I have the correct information and I don't end up paying for an unlock code that will not work since I didn't provide the proper carrier.
My SIM card (not sure if that matters): BELL
My board/IMEI: ROGERS (Apparently)
I wanted to determine which carrier I was tied to but I see 0 bloatware in my phone which makes me think the guy is wrong/lying and it's not actually a Rogers board. Is there another way to determine which carrier my phone is tied to?
Click to expand...
Click to collapse
The carrier doesn't matter. Once unlocked, it's unlocked for every carrier (unless it's unlocked by code).
You could go check the APN to see which carrier it's from.

BWolf56 said:
The carrier doesn't matter. Once unlocked, it's unlocked for every carrier (unless it's unlocked by code).
Click to expand...
Click to collapse
Oh really? I was looking at the gsmliberty site for unlocking and it asks for a carrier. I can't post the link since I'm a new account but here it is split:
gsmliberty(dot)net/shop/samsung-galaxy-s3-unlock-codes-p-3528.html
I then went into their Terms of Service and it specifies that if I provide an incorrect carrier and the unlock code doesn't work then I won't get a refund. Does this mean this site is BS and I should avoid it and find another?
EDIT: Oh I see you added info about checking the APN. Don't know what that is but I'll Google it. Assuming I find it should I still avoid gsmliberty or should I give them a shot?

BWolf56 said:
The carrier doesn't matter. Once unlocked, it's unlocked for every carrier (unless it's unlocked by code).
You could go check the APN to see which carrier it's from.
Click to expand...
Click to collapse
I went to Settings > Connections > More networks > Mobile Networks and it tells me this: Insert SIM card to access network services
EDIT: Ok I finally found the AP and CSC by dialing *#1234# and then comparing it to sammobiles firmware to find out which carrier it is tied to. Still worried about the fact I get the SIM error above but hopefully that will go away when I attempt to unlock it

Cyclone112 said:
I went to Settings > Connections > More networks > Mobile Networks and it tells me this: Insert SIM card to access network services
EDIT: Maybe I'm looking at the wrong spot. Here is my phone's about in case that helps:
View attachment 2807396
Click to expand...
Click to collapse
Umm I though you'd have access to it w/o a sim card.
I'm not sure how else you could determine which carrier the motherboard is locked to.

BWolf56 said:
Umm I though you'd have access to it w/o a sim card.
I'm not sure how else you could determine which carrier the motherboard is locked to.
Click to expand...
Click to collapse
I just ended up editing my last post a minute before you posted this. I did determine the carrier and it is in fact Rogers. I was planning on just getting an unlock code through a website. You mentioned that means it will only be unlocked for them which I'm fine with but I'm just concerned about the fact I have a Bell SIM. Will that cause any problems with the unlock process or future dealings with BELL?
Actually I have a better question. Can I just put Bell's firmware on my phone instead of Rogers using Odin and then get an unlock for Bell and theoretically I'll be back to where I was?

What bootloader is on the phone? If you have the 4.3 bootloader, you'll have to buy an unlock code. If you have the 4.1.1 bootloader and you are running a stock ROM (doesn't matter about the carrier), you can use the free method to unlock it. If you have the 4.1.2 bootloader, downgrade to the Rogers 4.1.1 ROM and unlock it using the free method.

audit13 said:
What bootloader is on the phone? If you have the 4.3 bootloader, you'll have to buy an unlock code. If you have the 4.1.1 bootloader and you are running a stock ROM (doesn't matter about the carrier), you can use the free method to unlock it. If you have the 4.1.2 bootloader, downgrade to the Rogers 4.1.1 ROM and unlock it using the free method.
Click to expand...
Click to collapse
I'm running 4.3 so I know I need an unlock code unfortunately. I have a Bell SIM card but have Rogers firmware. The site I was looking to buy an unlock code from asks for my carrier so I presume I need to use Rogers. Will that be fine or am I able to just throw Bell firmware on my phone and buy an unlock code specifying Bell as my carrier?

I am not sure of you can load the stock Bell firmware and change the phone so it is locked to Bell. If this were the case, owners could switch carriers by flashing different firmware.

Cyclone112 said:
I just ended up editing my last post a minute before you posted this. I did determine the carrier and it is in fact Rogers. I was planning on just getting an unlock code through a website. You mentioned that means it will only be unlocked for them which I'm fine with but I'm just concerned about the fact I have a Bell SIM. Will that cause any problems with the unlock process or future dealings with BELL?
Actually I have a better question. Can I just put Bell's firmware on my phone instead of Rogers using Odin and then get an unlock for Bell and theoretically I'll be back to where I was?
Click to expand...
Click to collapse
Unlocking is permanent and unlocks to every carrier. Knowing which one you're locked to only matters to get a unlock code, after that, it's free for all.

BWolf56 said:
Unlocking is permanent and unlocks to every carrier. Knowing which one you're locked to only matters to get a unlock code, after that, it's free for all.
Click to expand...
Click to collapse
Gotcha, so there's no point in flashing Bell firmware at all. I just need the correct one for getting an unlock code in the first place. Thanks for helping a noob out.

[Q] Unlock Samsung S3 SGH-i747M (possible???)

Hello everybody
I have a Samsung S3 SGH-i747M (from Canada) with 4.4.2 and version I747MVLUFNE6 which is locked. It asks for "SIM network unlock PIN".
Is there any way (I don't care for the warranty) to make it work with an other SIM? I am currently in Switzerland.
Thank you very much in advance!

No you'll have to either call the original carrier of the phone and request the code or pay for the unlock code.

pre4speed said:
No you'll have to either call the original carrier of the phone and request the code or pay for the unlock code.
Click to expand...
Click to collapse
Do you know a reliable site where I can ask for the code?

There's lots of them out there. Pretty sure eBay has some and you can judge by their feedback and ratings...can't think of any specific ones right now though.
Sent from my SAMSUNG-SGH-T999 using Tapatalk

pre4speed said:
No you'll have to either call the original carrier of the phone and request the code or pay for the unlock code.
Click to expand...
Click to collapse
The problem is that I don't know at which carrier belonged the phone and one page that I found,that doesn't require the carrier and I think read that is reliable (swiftunlock.com), does not include the i747m in the list.
Any ideas or any other sites?

Any that offer it for the I747M should work. Don't take my word for it though. Ask the vendor first.
Sent from my SAMSUNG-SGH-T999 using Tapatalk

All the sites that i found ask for the carrier which I don't know or to have the phone rooted and have a version lower than 4.1.1 which I don't .
Is there any way to find out at which carrier it belonged?
Or any other reliable solution?
Please... :crying:

Go yo swappa.com and check the imei. I think it shows the original carrier when it does the check.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

grgkots said:
Hello everybody
I have a Samsung S3 SGH-i747M (from Canada) with 4.4.2 and version I747MVLUFNE6 which is locked. It asks for "SIM network unlock PIN".
Is there any way (I don't care for the warranty) to make it work with an other SIM? I am currently in Switzerland.
Thank you very much in advance!
Click to expand...
Click to collapse
I just unlocked my SGH-I747M(canada Rogers/Fido) by down-grading to 4.11 and using the info from this thread "How to Unlock Your Samsung Galaxy S3 & Note 2 (No Rooting)"

found this in t-mobile thread. might be worth a check
err on the side of kindness

mrmike7 said:
I just unlocked my SGH-I747M(canada Rogers/Fido) by down-grading to 4.11 and using the info from this thread "How to Unlock Your Samsung Galaxy S3 & Note 2 (No Rooting)"
Click to expand...
Click to collapse
Free method will not work unless the bootloader is from 4.1.2 or lower.

audit13 said:
Free method will not work unless the bootloader is from 4.1.2 or lower.
Click to expand...
Click to collapse
That maybe true.....but I do know it doesn't work with ICS or JB 4.1.2 because [4] NW Lock NV Data INITIALLIZ does not show in menu.

mrmike7 said:
That maybe true.....but I do know it doesn't work with ICS or JB 4.1.2 because [4] NW Lock NV Data INITIALLIZ does not show in menu.
Click to expand...
Click to collapse
Once you are on the 4.3 ot 4.4.2 bootloader, you cannot downgrade the bootloader and the 4.1.1 modem will not work on the 4.3 or 4.4.2 bootloader.
You must be on at least the 4.1.1 dialler and modem.

mrmike7 said:
I just unlocked my SGH-I747M(canada Rogers/Fido) by down-grading to 4.11 and using the info from this thread "How to Unlock Your Samsung Galaxy S3 & Note 2 (No Rooting)"
Click to expand...
Click to collapse
Hey, I also have a I747 on Rogers on 4.4.2. Im looking to downgrade it to 4.1.1 like you did so I can sim unlock it. What process did you use to downgrade? Was it this: http://www.sammobile.com/firmwares/download/8565/I747MVLDLK4_I747MOYADLK4_RWC.zip/
THanks.
---------- Post added at 01:54 PM ---------- Previous post was at 01:53 PM ----------
audit13 said:
Once you are on the 4.3 ot 4.4.2 bootloader, you cannot downgrade the bootloader and the 4.1.1 modem will not work on the 4.3 or 4.4.2 bootloader.
You must be on at least the 4.1.1 dialler and modem.
Click to expand...
Click to collapse
damnit, just saw this. Is there any way to downgrade to unlock the SIM? What about if im on a different ROM?

There is no free way to sim unlock your phone once you have the 4.3 or 4.4.2 bootloader on your phone.

How to know on which bootloader ( bootloader 4.4.2 or 4.3) I am coz I was able to install a custom rom on my SGH-I747M The rom is dirty unicorn android 5.1.1 lolipop rom so Can I downgrade coz if I remember correctly I upgraded from stock 4.1.1 so can I downgrade to stock 4.1.1 by downloading and injecting it via odin is it possible or will it hard brick my phone and can you give me way to confirm what bootloader I have ???

Boot into download mode and look at the screen. If you see anything about knox, it likely the bootloader can't be downgraded to 4.1.1.

audit13 said:
There is no free way to sim unlock your phone once you have the 4.3 or 4.4.2 bootloader on your phone.
Click to expand...
Click to collapse
Can you guide me that how to know which bootloader do you have i.e. do I have a 4.3 or 4.4.2 bootloader how would I know that? and also I do have a custom dirtyunicorn rom with 5.1.1 so is it possible for me to flash the 4.1.1 stock SGH-I747M rom to it and then unlock it and then again add my current rom and use it???

Download and install the Samsung phone info app from the play store, run it, and look at the last three characters of the bootloader. If it is mk3 or higher, the bootloader can't be downgraded.

sim unlock for sgh-i747m 4.4.2 working need confirmation
audit13 said:
There is no free way to sim unlock your phone once you have the 4.3 or 4.4.2 bootloader on your phone.
Click to expand...
Click to collapse
Not quite sure where to put this but I have just successfully sim unlocked a samsung galaxy s3 sgh-i747m on 4.4.2 .This is only prelimary but upon unlocking and inserting a Public Mobile sim I was able to text on a Canadian Rogers S3. No further testing has been done. I first rooted the phone using Kingoroot and then downloaded the phoneinfo app from play store. I then used the app to get to service menu.At first service menu is blank but I used menu ,then key input Q, then back, then key input 0000,then back and then service menu appears. Now I am doing this from memory and no longer have the phone or another one at the moment to confirm this and will update this as soon as I can. But to the best of my knowledge I first went to UMTS(1) ,thenDEBUG(1), then Phone Control(?), then Network Lock.. Perso-SHA256 was on(1) I set it to off (0). I then backed out of the menu and shut down phone.I inserted PM SIM in phone and booted up .Phone didnt ask for unlock code and shortly I had texting service with Public Mobile. I dont have voice or data to check those but cant seewhy they wouldnt work. Anyway can someone confirm this working.My steps may not be exact but if it worked for me it should work for others.

Need help network unlocking, flashed to stock

I got a new phone, the LM-G820UM AT&T version. I followed this guide: https://forum.xda-developers.com/t/tutorial-crossflash-bypass-opid-mismatched-error.4345963/ to flash the stock firmware. With my SIM card in it says "network locked", it doesn't prompt for the unlock code. I have the unlock code and I've tried the various unlock commands (2945#*71001# and 2945#*20001#), but nothing comes up when I do these. Do I need to get it back to the AT&T firmware to be able to unlock it? If so, how can I do this?

gunnerone007 said:
I got a new phone, the LM-G820UM AT&T version. I followed this guide: https://forum.xda-developers.com/t/tutorial-crossflash-bypass-opid-mismatched-error.4345963/ to flash the stock firmware. With my SIM card in it says "network locked", it doesn't prompt for the unlock code. I have the unlock code and I've tried the various unlock commands (2945#*71001# and 2945#*20001#), but nothing comes up when I do these. Do I need to get it back to the AT&T firmware to be able to unlock it? If so, how can I do this?
Click to expand...
Click to collapse
wow, yeah, that's unfortunate. First, yes, it's the at&t firmware that the unlock code works with, not any other firmware.
second, at&t doesn't make their kdz available, so you have no easy way to get back to their firmware.
you might get lucky and find someone who has backed up all their partitions from at&t. Then u would flash ea one back via qfil.
Important lesson: don't buy a locked phone. if u get a locked phone, don't to anything to the firmware until u unlock the phone.
cheers

@AsItLies would this phone work in it's current state with AT&T?

gunnerone007 said:
@AsItLies would this phone work in it's current state with AT&T?
Click to expand...
Click to collapse
To the best of my knowledge, no. At&t is one of the carriers that has restrictions for their networks. Last I read (have never used them personally), they only allow phones that have their IMEI (they check that), and it's using their ROM, to access volte and vowifi.
so, would it work? yes and no. Volte and Vowifi may or may not be important to you.
Additionally, I'm absolutely no expert with at&t, so u might just try and find out, my info could be outdated.