[Q] Any official JB ROM here? - Galaxy Ace II Q&A, Help & Troubleshooting

I want to flash CM 10.2 again on my Ace II because I'm having some issues with the mobile network since I flashed it from my original Gingerbread. Now I know I need an official Jelly Bean, but they didn't release an update in my country (Bosnia & Herzegovina) so what do I do now? Does that mean that I can't flash CM 10.2 at all without having some problems or is there a solution for me? Will it work if I flash an unofficial JB custom ROM? If yes can someone link me to such a ROM?
Thank you in advance

You can install all JB stock roms for europe and than flash CM

So let's say I take a JB firmware for Germany and flash it on my Bosnian device it will work for flashing CM...maybe I should mention that I have a carrier lock, could that be a problem? Thank u for ur reply
Sent from my GT-I8160 using XDA Free mobile app

It should work. I flashed a lot of stock ROMs from a lot of countries, and every one of them worked flawlessly. The carrier lock shouldn't cause any problems, although you might want to backup all of your data, just in case.

datelevatorguy said:
It should work. I flashed a lot of stock ROMs from a lot of countries, and every one of them worked flawlessly. The carrier lock shouldn't cause any problems, although you might want to backup all of your data, just in case.
Click to expand...
Click to collapse
I can't believe it worked. I've been waiting for months for the OTA update, but I guess flashing was the only solution...now I have an official Jelly Bean and tomorrow CM 10.2 hopefully without any problems. Thanks a lot guys

Related

[Q] How to update from 4.1.2 custom rom to 4.2.2 or higher

Hi Everyone,
I do know how to flash a new rom however I had issues flashing from stock 4.1.2 to custom 4.2.2 before (device wouldn't pass the boot screen). So do I have to be on a specific 4.1.2 rom to upgrade or I need to upgrade to a stock 4.2.2 first and then upgrade to a custom one?
Please recommend a fast 4.2.2 custom rom. I would like to keep dual sim feature if possible although I know most roms only support single sim.
My current rom info:
4.1.2
Baseband: I9082XXAMC4
Thanks in advance.
adam2010 said:
Hi Everyone,
I do know how to flash a new rom however I had issues flashing from stock 4.1.2 to custom 4.2.2 before (device wouldn't pass the boot screen). So do I have to be on a specific 4.1.2 rom to upgrade or I need to upgrade to a stock 4.2.2 first and then upgrade to a custom one?
Please recommend a fast 4.2.2 custom rom. I would like to keep dual sim feature if possible although I know most roms only support single sim.
My current rom info:
4.1.2
Baseband: I9082XXAMC4
Thanks in advance.
Click to expand...
Click to collapse
simple one line if want dual sim,(stock based roms only)..u can install stock rom 4.2.2....or balliboxers GENNXT rom based on latest firmware...
NOTE: RAM USAGE OF STOCK AND STOCK BASED ROMS IS HIGH....SO LESSER MULTITASKS HANDLES!
if u can compromise with dual sim ..then u can install slimbean roms...(as u mentioned u want lightest and fastest)... but as they are small and fast, they dont have many extra feature lik halo..bt are lightweight..less ram usage...
bt i wonder why u want 4.2.2 rom when u can installl latest kitkat 4.4.2 (cm11,slimkat rom, carbon rom)..
they all are kitkat roms..........
with cm being a base rom for every rom and a light good rom...so is slimkat...and carbon with good future updates including halo features....
if u still wanna stick to 4.2.2 ....then u got slimbean rom...cm rom....(both dont have halo feature),.bt light...or u cn have PAC,resurrection remix rom(for halo multitasking)...
(gaming is better on kitkat roms)
its all ur choice....
if u want any qsns u can ..
hope i helped ..
raghavsharmaxda said:
simple one line if want dual sim,(stock based roms only)..u can install stock rom 4.2.2....or balliboxers GENNXT rom based on latest firmware...
NOTE: RAM USAGE OF STOCK AND STOCK BASED ROMS IS HIGH....SO LESSER MULTITASKS HANDLES!
if u can compromise with dual sim ..then u can install slimbean roms...(as u mentioned u want lightest and fastest)... but as they are small and fast, they dont have many extra feature lik halo..bt are lightweight..less ram usage...
bt i wonder why u want 4.2.2 rom when u can installl latest kitkat 4.4.2 (cm11,slimkat rom, carbon rom)..
they all are kitkat roms..........
with cm being a base rom for every rom and a light good rom...so is slimkat...and carbon with good future updates including halo features....
if u still wanna stick to 4.2.2 ....then u got slimbean rom...cm rom....(both dont have halo feature),.bt light...or u cn have PAC,resurrection remix rom(for halo multitasking)...
(gaming is better on kitkat roms)
its all ur choice....
if u want any qsns u can ..
hope i helped ..
Click to expand...
Click to collapse
First of all, thanks for your awesome reply
Basically I'm on stock rom without useless Samsung apps. Instructions for Pac/resurrection says I need to be on stock rom in order to upgrade to 4.2.2. So am I ok to flash their rom or first install a stock rom?
You mentioned kitkat roms are better and I agree, however based on instructions I need to be on 4.2.2 first before upgrading
Which recovery is the best for making nandroid backups? clockworkmod seems to have issues occasionally creating bad backups.
Kitkat roms seems to have app2sd enabled by default, right? and no issues with Xposed framework modules?
adam2010 said:
First of all, thanks for your awesome reply
Basically I'm on stock rom without useless Samsung apps. Instructions for Pac/resurrection says I need to be on stock rom in order to upgrade to 4.2.2. So am I ok to flash their rom or first install a stock rom?
You mentioned kitkat roms are better and I agree, however based on instructions I need to be on 4.2.2 first before upgrading
Which recovery is the best for making nandroid backups? clockworkmod seems to have issues occasionally creating bad backups.
Kitkat roms seems to have app2sd enabled by default, right? and no issues with Xposed framework modules?
Click to expand...
Click to collapse
xposed is working fine on dalvik runtime(as google introduced new runtime with 4.4 named ART ,WHICH CONSUMES LESS RAM, BUT IS UNSTABLE)...
when they say that u need to be on stock ROM 4.1.2 , they actually mean the 4.1.2 bootloader..so its okat if u are on GENNXT ROM...stock..abit modified stock 4.1.2...(they specifically mean that if u want 4.2.2 rom, be on 4.1.2 bootloader...and if u want kitkat rom..then be on 4.2.2 rom(any stock based 4.2.2 rom like gennxt or slight modifyd 4.2.2 will do , as all they need is 4.2.2 bootloader for kk roms to work)...if u want kitkat rom.....be on stock based rom..which are touchwiz based roms of 4.2.2)....
so flash 4.2.2 rom by odin..and den install kitkat...if u face any problem ....just pm me ...and ya..
always do wipe cache,dalvikcache and data(if told) , whenever u flash anything(before and after flashing)... u can ask any qsna u wanna ask..hope i helped.
raghavsharmaxda said:
xposed is working fine on dalvik runtime(as google introduced new runtime with 4.4 named ART ,WHICH CONSUMES LESS RAM, BUT IS UNSTABLE)...
when they say that u need to be on stock ROM 4.1.2 , they actually mean the 4.1.2 bootloader..so its okat if u are on GENNXT ROM...stock..abit modified stock 4.1.2...(they specifically mean that if u want 4.2.2 rom, be on 4.1.2 bootloader...and if u want kitkat rom..then be on 4.2.2 rom(any stock based 4.2.2 rom like gennxt or slight modifyd 4.2.2 will do , as all they need is 4.2.2 bootloader for kk roms to work)...if u want kitkat rom.....be on stock based rom..which are touchwiz based roms of 4.2.2)....
so flash 4.2.2 rom by odin..and den install kitkat...if u face any problem ....just pm me ...and ya..
always do wipe cache,dalvikcache and data(if told) , whenever u flash anything(before and after flashing)... u can ask any qsna u wanna ask..hope i helped.
Click to expand...
Click to collapse
one question from my side as well.
I am on stock rooted 4.1.2 rom and I want to upgrade to stock 4.2.2 rom. what would be the best method?
can I install 4.2.2 latest version by flashing via odin directly or do I need to unroot first?
or it will be automatically unrooted when I install 4.2.2(stock) latest over my 4.1.2(stock) by odin?
I hope you got my question.
Sent from my GT-I9082
Sent from my GT-I9082
IdenTT said:
one question from my side as well.
I am on stock rooted 4.1.2 rom and I want to upgrade to stock 4.2.2 rom. what would be the best method?
can I install 4.2.2 latest version by flashing via odin directly or do I need to unroot first?
or it will be automatically unrooted when I install 4.2.2(stock) latest over my 4.1.2(stock) by odin?
I hope you got my question.
Sent from my GT-I9082
Sent from my GT-I9082
Click to expand...
Click to collapse
hi
if u flash the 4.2.2 via odin the root will go and u will be on stock 4.2.2
to my knowledge u dont need to un root just flash via odin and u should be good to go any one do correct me if im wrong this is based on what i read on samsung roms im on stock 4.2.2 which came with my phone i got a week back:laugh:
haree said:
hi
if u flash the 4.2.2 via odin the root will go and u will be on stock 4.2.2
to my knowledge u dont need to un root just flash via odin and u should be good to go any one do correct me if im wrong this is based on what i read on samsung roms im on stock 4.2.2 which came with my phone i got a week back:laugh:
Click to expand...
Click to collapse
currently I am on 4.1.2 stock. can I upgrade to the latest version of 4.2.2 available on [email protected] vai odin? you seems doubtful too. I am waiting for more replies..
Sent from my GT-I9082
IdenTT said:
currently I am on 4.1.2 stock. can I upgrade to the latest version of 4.2.2 available on [email protected] vai odin? you seems doubtful too. I am waiting for more replies..
Sent from my GT-I9082
Click to expand...
Click to collapse
hi
dear in just being cautious thats all i had a samsung phone long time back and i have used odin to flash back stock rom and had no problems asuming things are the same i have given u info based on my exp right now i have a new grand and i have not rooted added CWM and i dont have exp with the grand
based on my previous exp if u know how to use the odin properly it should not be a problem
IdenTT said:
currently I am on 4.1.2 stock. can I upgrade to the latest version of 4.2.2 available on [email protected] vai odin? you seems doubtful too. I am waiting for more replies..
Sent from my GT-I9082
Click to expand...
Click to collapse
yea..u just directly flash rom via odin....using odin and flashing a firmware official removes root and any other custom recoveries......so ur phone will be unrooted...and u have to root again if u wanna do something lets say TWEAKS
Hope i helped!
there is a thread specifically by chotu222 on how to root /install firmwares.....u can go in dat section and search a bit too!
raghavsharmaxda said:
yea..u just directly flash rom via odin....using odin and flashing a firmware official removes root and any other custom recoveries......so ur phone will be unrooted...and u have to root again if u wanna do something lets say TWEAKS
Hope i helped!
there is a thread specifically by chotu222 on how to root /install firmwares.....u can go in dat section and search a bit too!
Click to expand...
Click to collapse
I finally got the chance to upgrade to stock 4.2.2 via odin and gaining root again. However I was unable to install kitkat. Even though I wiped cache and did factory reset, boot didn't pass the samsung logo. I still have 2 sim support, is it worthed to install kitkat? According to your previous instructions, I needed to be on 4.2.2 base in order to upgrade to kitkat. What would you suggest in my case
Thanks
adam2010 said:
I finally got the chance to upgrade to stock 4.2.2 via odin and gaining root again. However I was unable to install kitkat. Even though I wiped cache and did factory reset, boot didn't pass the samsung logo. I still have 2 sim support, is it worthed to install kitkat? According to your previous instructions, I needed to be on 4.2.2 base in order to upgrade to kitkat. What would you suggest in my case
Thanks
Click to expand...
Click to collapse
Bro u need to be on cwm with selinux suport..just refer to the OPs of CM 11 rom.......another thing did u format system before flashing kitkat roms...instructions are very clearly written in the respective OPs bro.......u shud be able to flash these without any issues...........
adam2010 said:
I finally got the chance to upgrade to stock 4.2.2 via odin and gaining root again. However I was unable to install kitkat. Even though I wiped cache and did factory reset, boot didn't pass the samsung logo. I still have 2 sim support, is it worthed to install kitkat? According to your previous instructions, I needed to be on 4.2.2 base in order to upgrade to kitkat. What would you suggest in my case
Thanks
Click to expand...
Click to collapse
I am a heavy gamer and performancive device addict..
Kitkat dont have any fancy samsung stuffs bro..bt its all system files are of kitkat so the gaming performance is alot increased.. All game bugs are almost fix which were in 4.2.2......there is work around for every thing..
I mean..think about it..
I never use smart stay...
I nor did use much of live wallpapers as they were battery consuming..the lock screen was fancy but still lets face truth that its just meant for security/unlocking screen ...u will have to compromise with single sim and non fancy apps ..
But it does worth a try..i mean why not ... Give it a shot and i am sure u will find something unique about it...
It got its own features..so ya...its ur wish..there are also downsides of it .....u can check respective threads and know more..
Hope i helped
Sent from my GT-I9082 using Tapatalk
raghavsharmaxda said:
I am a heavy gamer and performancive device addict..
Kitkat dont have any fancy samsung stuffs bro..bt its all system files are of kitkat so the gaming performance is alot increased.. All game bugs are almost fix which were in 4.2.2......there is work around for every thing..
I mean..think about it..
I never use smart stay...
I nor did use much of live wallpapers as they were battery consuming..the lock screen was fancy but still lets face truth that its just meant for security/unlocking screen ...u will have to compromise with single sim and non fancy apps ..
But it does worth a try..i mean why not ... Give it a shot and i am sure u will find something unique about it...
It got its own features..so ya...its ur wish..there are also downsides of it .....u can check respective threads and know more..
Hope i helped
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
Ok bro, I installed selinux cmw recovery... downloaded CM11... I noticed CM is about 200mb comparing to 1 GB stock 4.2.2. Does that mean I will get more free space on internal sdcard? (out of 4GB I mean)...as others suggested, I need to do full wipe/reset factory and manually format system? and if update wasnt successful I can go back to stock via Odin right?
adam2010 said:
Ok bro, I installed selinux cmw recovery... downloaded CM11... I noticed CM is about 200mb comparing to 1 GB stock 4.2.2. Does that mean I will get more free space on internal sdcard? (out of 4GB I mean)...as others suggested, I need to do full wipe/reset factory and manually format system? and if update wasnt successful I can go back to stock via Odin right?
Click to expand...
Click to collapse
You will get a little more space than stock ROMs. And you can go back to stock via ODIN
Sent from my GT-I9082 using Tapatalk Pro
Ateekujjawal said:
You will get a little more space than stock ROMs. And you can go back to stock via ODIN
Sent from my GT-I9082 using Tapatalk Pro
Click to expand...
Click to collapse
Ok I just flashed CM successfully thanks everyone.
adam2010 said:
Ok I just flashed CM successfully thanks everyone.
Click to expand...
Click to collapse
Thanks...........
for saying Thanks, dude

[Q] Problem with T889 and 4.4 Roms....

Hi XDA Members,
I have an average understanding of rooted android devices and roms. I currently have a Tmobile Galaxy Note II (T0ltetmo)(T889) that is rooted. It has TWRP on it. I am running currently pacman rom (pac_t0ltetmo-4.3-20140128.zip) which works fine.
Here is the problem.... I am trying to upgrade to a Pacman Rom that is based on Android 4.4 which I have found. I installed the Pacman rom 4.4 & GAPPS stock 4.4 which works flawlessly, the only problem is..... My Radio doesn't work! I have my GSM Sim in and nothing comes up! Heres the thing aswell... I installed other roms that are based on 4.4 and the radio's doesn't work on any of those ROMs either, as soon as restore my other backups that are 4.3 the radio works.
What could be the problem? Is there something I am forgetting to do that the developers didn't tell me? Do I need to install something else that wasn't specified?
Please help!
Flash the newest kernel and modem if you haven't already. I noticed much the same when just testing 4.4 from a 4.1 rom.
Sent from my SGH-T889 using Tapatalk
pyr02k1 said:
Flash the newest kernel and modem if you haven't already. I noticed much the same when just testing 4.4 from a 4.1 rom.
Sent from my SGH-T889 using Tapatalk
Click to expand...
Click to collapse
SOLVED! I flashed just the modem and everything was fine! Thank you.

[Q] SGH T999 and Roms.

I had recently obtained a s3 its a T-mobile, its running 4.1.2, with the T999UVDMD5 baseband. I rooted it, flashed xposed(haha the only thing XD). Well, reading about/friends have said there was trouble with the 4.3 update so I decided to stay on 4.1.2.
However, now I've decided to flash a custom rom, and I have noticed the different labels(D2lte, D2tmo, D2usa) and I had read from http://forum.xda-developers.com/showthread.php?t=1736477 "As of right now, the roms for your S3 are not meant to be used on other S3 variants" .
I have a few questions:
1.There was a baseband update, should I update it? If so, how exactly?
2.Would it be wise to flash a D2lte on This T-mobile device? I was looking at Resurrectionhttp://forum.xda-developers.com/showthread.php?t=2692481(originally waiting on cm11 but.. Yeah lol)
3.Looking at KitKat rooms, which ones could I flash?
4.Would it be safe, if I did flash a 4.4.2 to restore a nandroid backup of my fresh rooted stock 4.1.2.
5.Lastly, what kernel would you say use?(Sorry to ask, curiosity as to which i could flash)
I appreciate taking your time to answer my questions and have a good day!
1) custom recovery.. There are zips available to flash
2) d2lte covers all d2 devices so its safe
3)Any on the development threads
4) Yes
5) like on 3, you can flash any kernel in the development threads, experiment and see which one works the best for you!
Sent from my SGH-M919 using Tapatalk
Thank you! Time to get to work!
Ravenjolly said:
I had recently obtained a s3 its a T-mobile, its running 4.1.2, with the T999UVDMD5 baseband. I rooted it, flashed xposed(haha the only thing XD). Well, reading about/friends have said there was trouble with the 4.3 update so I decided to stay on 4.1.2.
However, now I've decided to flash a custom rom, and I have noticed the different labels(D2lte, D2tmo, D2usa) and I had read from http://forum.xda-developers.com/showthread.php?t=1736477 "As of right now, the roms for your S3 are not meant to be used on other S3 variants" .
I have a few questions:
1.There was a baseband update, should I update it? If so, how exactly?
2.Would it be wise to flash a D2lte on This T-mobile device? I was looking at Resurrectionhttp://forum.xda-developers.com/showthread.php?t=2692481(originally waiting on cm11 but.. Yeah lol)
3.Looking at KitKat rooms, which ones could I flash?
4.Would it be safe, if I did flash a 4.4.2 to restore a nandroid backup of my fresh rooted stock 4.1.2.
5.Lastly, what kernel would you say use?(Sorry to ask, curiosity as to which i could flash)
I appreciate taking your time to answer my questions and have a good day!
Click to expand...
Click to collapse
To answer your questions:
1. You do not need to update your firmware - I'm still on MD5. Modems, however, can be flashed separately from firmware.
2. You can flash d2lte ROMs on this phone as it's all one unified build for US SGS3 variants. (I.e. T-Mobile/AT&T/Sprint/Verizon SGS3 is now all built under d2lte).
3. As far as which KK ROM to flash...just try them all out and see which ones you like the best. Each ROM has different features - see which one is right for you.
4. If you don't update your firmware, then yes. (FYI, flashing a custom KK ROM does not update your firmware. However, if you flash one of the 4.3 root66 files that has firmware included, then it will update your firmware).
5. Again, try it out. It's hard to say which ROM/kernel combination will work best. I suggest you read the forums to see what people think of them.
Hope that helps.
Ravenjolly said:
Thank you! Time to get to work!
Click to expand...
Click to collapse
No problem, and i forgot to say but the only time you might need to update modem is if you flash a 4.3 touchwiz ROM, other than that its not really needed unless you want to experiment and see if one gives you better results
Sent from my SGH-M919 using Tapatalk
Oh, and one more thing: DO NOT flash a ROM that is for the international version of the SGS3 (i9300). It will, most definitely, brick your phone.
Don't know if you knew that or not...just wanted to make sure.

[Q] Bootloader question :)

I recently updated my N7105 to the recent 4.4.2 Nordic ROM ( n7105xxufnd3 )that was floating round that tripped my Knox, which I dont care about.
When i got sick of the updates abysmal battery life i flashed the latest stable release of CM for the GNII LTE a 4.3 based ROM with out issues.
But I'd like to know if i can revert back to my original ROM i.e. WanamLite MC3 V1.3, a TW 4.1.2 based ROM, for its spen support, battery life, atpx and boeffla sound support (im a big music listener) w/ Wanam's Adam Kernel.
Can i do this with out running into any issues, despite the gap between a 4.4.2 boot-loader (as I've been told i cant roll-back from this version) to a TW 4.1.2 ROM?
Thanks in advance guys
greyhamism said:
Can i do this with out running into any issues?
Click to expand...
Click to collapse
Based from what I remember, devs say that when you are with KK BL (ND3), you cannot flash a stock rom lower than it and the lowest custom rom that you can flash is 4.3.
Is there anyway i can flash an older bootloader? and/or is there a similar ROM to Wanam's that uses 4.3 as its base?
As awesome as CM is, there are touchwiz features specific to the note series that are hard to implement on CM/ASOP based ROMS :/
greyhamism said:
Is there anyway i can flash an older bootloader? and/or is there a similar ROM to Wanam's that uses 4.3 as its base?
Click to expand...
Click to collapse
Do not try to install anything lower as it will break device. I'm sorry, I know nothing about wanam lite.
I have a unrooted note 2, manually installed 4.4.2 as 4.3 had major battery issues.
Things got worse for me in 4.4.2 nordic countries and I went and downloaded the offical roms from sammobile and am now back on 4.1.1 offical.
It can be done.
Sent from my SM-T310 using XDA Free mobile app
hotkolbas said:
It can be done.
Click to expand...
Click to collapse
Wow, I thought once you are in a higher bootloader, you cannot install a lower one. No problems at all?
I'm sorry if I gave out wrong info, that was how I knew it was.
I have no issues at all.
Apart from missing out on features from 4.1.2 and above everything works as if I didnt update the device at all.
I would not do a restore from higher up android versions but if you start feom scratch its all good.
And I can say my zero lemon battery is working at it should be, I now have days worth of battery life.
I'm getting invalid kernel/ ramdisk size error on bootloader screen. This is the first time I got this error while entering recovery screen. I'm don't know much about this. Please help.
I have rooted Moto X (2013) running LiquidSmooth v 3.2
Sent from my Moto X using XDA Free mobile app
Sorry champ but this threqd is for a galaxy note 2 specifically a gt7105 and has installed a samsung stock rom, I have done this and have gone back to 4.1.1 but seeing as you have a rooted romed moto x it is out of my league.
I dare say this process is incompatible with the moto x and seeing as you can get into recovery or cwm or what ever its called you can still flash a rom with the relavent bootloader that was previous to your dilemma
Sent from my SM-T310 using XDA Free mobile app

[Q] Best option for stability and speed, custom ROM or Rooted Stock

I've just bought a used Ace 2 which has come with:
GT I8160 (im in the UK)
android v 2.3.6
baseband - I8160XXLL2
2.6.35.7-1218501
build number gingerbread.XXLL2
The threads about flashing a custom ROM have 100+ pages and a lot of links are out of date. I wanted to try a custom ROM, eg CM 10.2 but I have a couple of questions.
I just want to be able to use modern apps, eg Tom Tom app. Google maps, Chrome, and I need to be able to use the phone in different countries, eg France, Portugal, Croatia. The current 2.3.6 is not compatible with some new apps so I need to upgrade.
Should I just update to the Jellybean Samsung provide via Kies?
Should I update to a custom ROM eg CM 10.2 ( i think this may be a stable release), if so will this be stable and have less bugs than the stock ROM?
Should I upgrade to samsung Jellybean and then root and remove bloatware?
I would like to try CM but I think it might not be as stable as the stock ROM, is that correct? Also there are questions as to the process and correct files I will need but I will ask that later if needed.
Thanks!
ringoid said:
I've just bought a used Ace 2 which has come with:
GT I8160 (im in the UK)
android v 2.3.6
baseband - I8160XXLL2
2.6.35.7-1218501
build number gingerbread.XXLL2
The threads about flashing a custom ROM have 100+ pages and a lot of links are out of date. I wanted to try a custom ROM, eg CM 10.2 but I have a couple of questions.
I just want to be able to use modern apps, eg Tom Tom app. Google maps, Chrome, and I need to be able to use the phone in different countries, eg France, Portugal, Croatia. The current 2.3.6 is not compatible with some new apps so I need to upgrade.
Should I just update to the Jellybean Samsung provide via Kies?
Should I update to a custom ROM eg CM 10.2 ( i think this may be a stable release), if so will this be stable and have less bugs than the stock ROM?
Should I upgrade to samsung Jellybean and then root and remove bloatware?
I would like to try CM but I think it might not be as stable as the stock ROM, is that correct? Also there are questions as to the process and correct files I will need but I will ask that later if needed.
Thanks!
Click to expand...
Click to collapse
I think you should try it yourself. For my needs, I can't live with stock anymore lol. With my needs, I multitask a lot, needs speed and stability and so far I'm quite satisfied with CM11 built by ace2nutzer with his kernel or ChronoMonochrome's kernel.
For another option, I also like liquid smooth, but I kinda missed some features from CM (kinda forget what was that).
By this time, we already have everything that we could use from stock with alternatives, and some better. But again, try it yourself to know which suits your needs.
Sent from my GT-I8160 using Tapatalk
Ok, cool. I guess I can revert back to stock if I dont like it.
So I guess I just use the ROM from this link with the latest build date?
http ://xda.mister-freeze.eu/XDA-files/ace2nutzer/Kernel/
which is ace2nutzer.kernel.4.4.x_20150620_codina.p.l.zip
Just built 2 days ago, 20th June 2015?
Also what gapps do I need?
Thanks!
ringoid said:
Ok, cool. I guess I can revert back to stock if I dont like it.
So I guess I just use the ROM from this link with the latest build date?
http ://xda.mister-freeze.eu/XDA-files/ace2nutzer/Kernel/
which is ace2nutzer.kernel.4.4.x_20150620_codina.p.l.zip
Just built 2 days ago, 20th June 2015?
Also what gapps do I need?
Thanks!
Click to expand...
Click to collapse
Nope. That's the kernel only. For the ROM, follow this link: http://xda.mister-freeze.eu/XDA-files/ace2nutzer/CM11/codina/cm-11-20150610-UNOFFICIAL-codina.zip
GApps: http://d-h.st/hrsq
After flashing the ROM, you could flash the kernel with the link you found.
That is really helpful, I would have never found the right files on my own
...
decided to start another thread about problems I'm having.
shaqman89 said:
Nope. That's the kernel only. For the ROM, follow this link: http://xda.mister-freeze.eu/XDA-files/ace2nutzer/CM11/codina/cm-11-20150610-UNOFFICIAL-codina.zip
GApps: http://d-h.st/hrsq
After flashing the ROM, you could flash the kernel with the link you found.
Click to expand...
Click to collapse
Hi, I want install Ace2Nutzer's "cm-11-20150714-UNOFFICIAL-codina.zip" rom and "ace2nutzer.kernel.4.4.x_20150725_codina.p.l.zip" kernel version. Will it happen stable? First, I flashing rom and after that, flash kernel with CWM, is it OK? Thanks for now...
thelegendy said:
Hi, I want install Ace2Nutzer's "cm-11-20150714-UNOFFICIAL-codina.zip" rom and "ace2nutzer.kernel.4.4.x_20150725_codina.p.l.zip" kernel version. Will it happen stable? First, I flashing rom and after that, flash kernel with CWM, is it OK? Thanks for now...
Click to expand...
Click to collapse
Try it. Then you'll know whether it is stable or not.
Anyway, so far no one has got serious issues.
Yes, ROM first, then kernel. That is assuming you are at least from stock Jb or any other custom kk or lp roms
Sent from my GT-I8160 using Tapatalk
Download CM11 by Chrono and ace2nutzer. Choose better one for Your phone, You know, ROMs works different on each phone.
Nabazgrał to Nexus⁴.
Thank you all, you are the best!
Have you managed to get WIFI working?

Categories

Resources