[Q] Restore stock ROM - HTC One X

Hi everyone
I recently updated my HTC One X (locked to O2 UK) to CyanogenMod 10.2.1
I unlocked the bootloader from HTCDev, installed ClockworkMod Recovery v5.8.4.0 and rooted the phone.
I tried network unlocking the phone yesterday after receiving the unlock code from O2, however I found out after looking online that custom ROMS are missing the components to complete the unlock process.
I kept receiving a "Network unlock process unsuccessful" message on screen...
I need to restore a stock ROM running Sense apparently, my question is what's the correct process to go through?
I did a Nandroid backup yesterday of my current setup with CyanogenMod installed, tried installing a stock ROM I found but it didn't work.
Using ClockworkMod recovery the ROM installed fine however after rebooting the phone it was stuck at the HTC boot screen and wouldn't load the OS properly.
Can someone please point me in the direction of the O2 UK stock ROM and advise what the best procedure is?
Thank you in advance

http://forum.xda-developers.com/showthread.php?t=1975140
Only chance

Thank you for the very quick reply!!
I'm not sure which of those backups I need? Is this the one:
CID 02__001
Nandroid Backup 1.29.206.11 CID 02__001 thanks to hackarchive (O2)
Do I just need to extract it as the instructions say then do a restore? I suppose afterwards I will be able to restore my CyanogenMod backup and be up and running again?
Thanks

You need the rom that matches the outcome of :
Fastboot getvar version-main
And indeed as the thread says, unpack to the specific recovery folder, flash the boot.img, full wipe and then restore

Thanks for that
However there doesn't seem to be a ROM that matches my handset, I got the following result:
4.18.206.4
Thanks

Hi
Is anyone able to help?
I need a Nandroid backup from a UK O2 HTC One X with the software version of 4.18.206.4
Thanks in advance

Mr Hofs said:
You need the rom that matches the outcome of :
Fastboot getvar version-main
And indeed as the thread says, unpack to the specific recovery folder, flash the boot.img, full wipe and then restore
Click to expand...
Click to collapse
do you have a link for CID: O2_ _ 001 ?
I Need to do a simunlock...

Related

[Q] Restoring nandroid backup

Hi all,
I was on stock 1.26 then unlocked rooted and installed CWM.
I made a backup with cwm, and then installed CM9. I'm going to return my One X and want to restore the backup. My question now is, do I need and boot.img first before I can restore my backup? During the backup process CWM said 'backing up boot image..' So will it restore it as well?
Thanks in advance....
Klyupp said:
Hi all,
I was on stock 1.26 then unlocked rooted and installed CWM.
I made a backup with cwm, and then installed CM9. I'm going to return my One X and want to restore the backup. My question now is, do I need and boot.img first before I can restore my backup? During the backup process CWM said 'backing up boot image..' So will it restore it as well?
Thanks in advance....
Click to expand...
Click to collapse
No just restore your backup, flash stock recovery and then re-lock bootloader.
Help (if anyone can)
Hi, noob here (registration wise) been lurking for a year of so now.
First up I want to say I am not totally new to everything, I have rooted, flashed all sorts of roms etc on other models but my issue is with returning to stock on an HTC One X. I am hoping either someone can help me or at least tell me no one can at the moment.
I have done a number of searches and tried various things none of which have worked I am currently romless (no os installed when checked last on twrp) however since then I have also tried flashing a rom.zip so no longer have twrp at the moment but hopefully can still install it as I can get into fastboot.
My device is on Voda UK so currently it doesnt have an ruu that I can find the only thing I found was this a 3.14.161.27 rom zip which I tried flashing but while it flashed it just stays on the htc screen (it seems quite small and didnt have a system image in so wasnt sure if it was even complete)
My question is can I do anything with a nandroid backup if I can find one to get a uk stock even if its not Vodafone (or does it have to be Voda) if so can anyone point me to a dl? if not can anyone suggest anything to try or am I going to have to try and flash a custom rom again and not be on stock until a ruu is made if one is.
Thanks in advance for any guidance
edit : read the wrong post.....why do people bump posts from freakin MAY 2012 !!!
Edit : read your post ! Give me your main version number
Fastboot getvar version-main
In the mean time flash this recovery
http://db.tt/Krlm4dPs
Rename it to recovery.zip and flash it
Mr Hofs said:
edit : read the wrong post.....why do people bump posts from freakin MAY 2012 !!!
Edit : read your post ! Give me your main version number
Fastboot getvar version-main
In the mean time flash this recovery
Rename it to recovery.zip and flash it
Click to expand...
Click to collapse
Hi,
Version-main is 3.14.161.27 (that zip i tried earlier was meant to be the latest files) cid is vodap001
Oke so the zip is a nandroid backup ? Of so, you need to unpack it !
Check here
http://forum.xda-developers.com/showthread.php?t=1975140
It has your nandroid backup, in the OP you also get a description where to put it on the sdcard !
With the recovery i sent you, you can mount the sdcard as a mass storage device and copy it over
Mr Hofs said:
Oke so the zip is a nandroid backup ? Of so, you need to unpack it !
Check here
http://forum.xda-developers.com/showthread.php?t=1975140
It has your nandroid backup, in the OP you also get a description where to put it on the sdcard !
With the recovery i sent you, you can mount the sdcard as a mass storage device and copy it over
Click to expand...
Click to collapse
so does it not matter that the version number of a nandroid backup is lower than my version main? (sorry for the question this nandroid backups are the one part of this side of thing I am not familiar with)
No that's not the issue, but the thread has your exact main version nandroid !
Mr Hofs said:
No that's not the issue, but the thread has your exact main version nandroid !
Click to expand...
Click to collapse
ok thanks I just looked at the initial post and saw vodap001 was lower than my version (hence why my question) but then searched the thread and saw the vodap102 can be used on mine and that is the same version.
Yes it should be compatible......but you can also restore a lower matching version and restore the stock recovery afterwards and update to JB again !
If you want to be 100% sure it works , go for option 2 .... Restore the lower one and update again
Mr Hofs said:
Yes it should be compatible......but you can also restore a lower matching version and restore the stock recovery afterwards and update to JB again !
If you want to be 100% sure it works , go for option 2 .... Restore the lower one and update again
Click to expand...
Click to collapse
ok thanks

Orange branded JB update released!

Just popped up on my One X in the UK. Installing now. Looks the same as the other updates (360-odd MB.) At last! Version is 3.16.61.6
Edit - Now installed & feels great. Things I've noticed Orange have done:
- Browser icon changed to previous Orange icon (grrr!)
- Apps now include "Best Deals" (no idea - will disable), HTC Media Link HD (sure it wasn't there before)
Kernel is 3.1.10-g0867ccf
Yes, just got this myself too. There is also a "Lookout Security" app and a "Power Saver" feature. Will try that instead of Juice Defender for a while and see what happens.
OMG i just can't believe it, they said on FB "early new year", and now that suprise
now i have to back to stock and install it
Good news - glad to hear. Thanks.
I can't go back to stock 1.29.061.11 and i don't know why :/ Please share the RUU or ZIP file (is there a way to flash this OTA zip file via stock/custom recovery?).
SeBoLeX said:
I can't go back to stock 1.29.061.11 and i don't know why :/ Please share the RUU or ZIP file (is there a way to flash this OTA zip file via stock/custom recovery?).
Click to expand...
Click to collapse
Have you got the 1.29.061.11 ruu? If so all you have to do is relock your bootloader and then run it. If it won't run while your booted for some reason do it while your in fastboot.
http://www.htcruu.com/?dir=Endeavor
Sent from my HTC One X using Tapatalk 2
Yes, I have this RUU RUU_ENDEAVOR_U_ICS_40_Orange_UK_1.29.061.11_Radio_1.1204.105.14_release_260736_signed. Now i have custom ROM (ARHD 9.7.2) relocked device, stock recovery, hboot 1.12.0000. When I use command "getvar version-main" showes me 2.17.61.3 When I try to install RUU there is an erreo "Error 140: Bootloader version error".
Hi all,
I have a branded Orange HTC One X ORANG001.
I can't find any updates when I check for them and I'm stock, any ideas?
Thanks
FruityTen said:
Hi all,
I have a branded Orange HTC One X ORANG001.
I can't find any updates when I check for them and I'm stock, any ideas?
Thanks
Click to expand...
Click to collapse
I'm at work right now but when I get home I'm planning to flash the RUU and see if I can update to Jelly Bean. will let you know if I have any updates available later.
ghandi500 said:
I'm at work right now but when I get home I'm planning to flash the RUU and see if I can update to Jelly Bean. will let you know if I have any updates available later.
Click to expand...
Click to collapse
Thank you very much kind sir, I was going to try the same so please keep me posted on which RUU you try.
Excited for JB!
SeBoLeX said:
Yes, I have this RUU RUU_ENDEAVOR_U_ICS_40_Orange_UK_1.29.061.11_Radio_1.1204.105.14_release_260736_signed. Now i have custom ROM (ARHD 9.7.2) relocked device, stock recovery, hboot 1.12.0000. When I use command "getvar version-main" showes me 2.17.61.3 When I try to install RUU there is an erreo "Error 140: Bootloader version error".
Click to expand...
Click to collapse
I think u need the 2.17 ruu not the 1.29
I can't find 2.17.61.3 ruu anywhere, but i've got this Nandroid Backup 2.17.61.3 CID ORANG001 from http://forum.xda-developers.com/showthread.php?t=1975140 Can I use it to back to stock?
SeBoLeX said:
I can't find 2.17.61.3 ruu anywhere, but i've got this Nandroid Backup 2.17.61.3 CID ORANG001 from http://forum.xda-developers.com/showthread.php?t=1975140 Can I use it to back to stock?
Click to expand...
Click to collapse
i'm not sure, i'd also like to know... guess we'll have to wait for the clever people to come online... hehe
If that's the case why have t-mobile not released then? Orange is part of EE. bored of the whole process
Sent from my HTC One X using xda app-developers app
Success, Im on stock again
SeBoLeX said:
Success, Im on stock again
Click to expand...
Click to collapse
How did you do it? Did you use Nandroid or RUU?
Has the OTA popped up?
Thanks
Nandroid Backup 2.17.61.3 CID ORANG001 from http://forum.xda-developers.com/showthread.php?t=1975140 then follow instruction and thats it at the end flash stock recovery, relock bootloader. after that small update appear 1,25 MB, restart and now im downloading 300+ MB update 4.1.1
Just ask if you have some questions.
Tell me where and I will upload file OTA_ENDEAVOR_U_JB_45_S_Orange_UK_3.16.61.6-2.17.61.3_release_301586ebnqevgbwdfkb4ee (364 MB)
SeBoLeX said:
Nandroid Backup 2.17.61.3 CID ORANG001 from http://forum.xda-developers.com/showthread.php?t=1975140 then follow instruction and thats it at the end flash stock recovery, relock bootloader. after that small update appear 1,25 MB, restart and now im downloading 300+ MB update 4.1.1
Just ask if you have some questions.
Tell me where and I will upload the film OTA_ENDEAVOR_U_JB_45_S_Orange_UK_3.16.61.6-2.17.61.3_release_301586ebnqevgbwdfkb4ee (364 MB)
Click to expand...
Click to collapse
From reading the instructions I need to flash Clock WorkMod, then do the Nandroid stuff is that right?
I've already got a relocked bootloader as I did have ARHD.
Could you give me some idiot proof instructions? The ones in that post don't seem to be overly friendly to people who aren't familiar with this. Many thanks
Don't worry it was my first time too
I believe you know how to use te commend line and fastboot commends
1. Unlock your bootloader
2. Flash CWM recovery
3. Download the Nandroid Backup 2.17.61.3 CID ORANG001 from http://forum.xda-developers.com/showthread.php?t=1975140
4. Create folder in sdcard of your HOX (your sdcard\clockworkmod\backup\ put here unpacked nandroid "2012-12-22.14.26.42"
5. Copy boot.img from nandroid folder to fastboot folder in your PC
6. Flash the boot.img
7. Go to CWM and "Backup&Restore" -> "Restore", confirm you want restore it and thats it
8. Now you have only to flash stock recovery and relock bootloader
I hope you can understand my instruction, my english isn't perfect
Thank you for this, I'm gunna give it a go when I get home

[Q] Updating HBOOT

Sorry for bothering you guys again ^^
Finally I found some informations about updating HBOOT one my HOX, but I don't want to ruin it, so i wanted to ask you if I understood everything^^
My acutal HBOOT is 1.12, my main-version (dunno what exactly it is called) is 2.17.771.3 and my CID is H3G__106 (Hutchison 3, Austria).
Currently I am on ICJ 1.72.
I've found the following threads:
H3G BRANDED JB | Manual Update, Nand, OTA File, Firmware.zip [4/2]
[TUT] How to upgrade HOX with a RUU(hboot.img, etc..) after installed a custom rom
[COLLECTION]Stock Nandroid Backups for Different CIDs
Unfortunately I'm not sure which firmware.zip, etc. I have to use to update my HBOOT on 1.39(?, I think it's the actual version) to use ICJ 2.1.
I would be pleased if you can help me and tell me what to do and which firmware.zip, etc. I should use.
cheers,
z3xi0n
z3xi0n said:
Sorry for bothering you guys again ^^
Finally I found some informations about updating HBOOT one my HOX, but I don't want to ruin it, so i wanted to ask you if I understood everything^^
My acutal HBOOT is 1.12, my main-version (dunno what exactly it is called) is 2.17.771.3 and my CID is H3G__106 (Hutchison 3, Austria).
Currently I am on ICJ 1.72.
I've found the following threads:
H3G BRANDED JB | Manual Update, Nand, OTA File, Firmware.zip [4/2]
[TUT] How to upgrade HOX with a RUU(hboot.img, etc..) after installed a custom rom
[COLLECTION]Stock Nandroid Backups for Different CIDs
Unfortunately I'm not sure which firmware.zip, etc. I have to use to update my HBOOT on 1.39(?, I think it's the actual version) to use ICJ 2.1.
I would be pleased if you can help me and tell me what to do and which firmware.zip, etc. I should use.
cheers,
z3xi0n
Click to expand...
Click to collapse
Well i would go with the nandroid backup (the one with from the last link) get your nandroid backup from there matching your MAIN number .... 2.17.771
You unzip the nandroid backup to the phone (read the OP to where exactly) then you flash the boot.img from that nandroid (located in the folder) and perform a full wipe in the custom recovery and restore the nandroid, boot it once to check the phone runs as new...all Oke, flash back the stock 2.17 recovery and reboot the phone and check for software updates.
And as for the firmware flash, the thread could not have typed it out better.....you need the part that says NAND H3G__106......
All the commands are in there and the links too
Mr Hofs said:
Well i would go with the nandroid backup (the one with from the last link) get your nandroid backup from there matching your MAIN number .... 2.17.771
You unzip the nandroid backup to the phone (read the OP to where exactly) then you flash the boot.img from that nandroid (located in the folder) and perform a full wipe in the custom recovery and restore the nandroid, boot it once to check the phone runs as new...all Oke, flash back the stock 2.17 recovery and reboot the phone and check for software updates.
And as for the firmware flash, the thread could not have typed it out better.....you need the part that says NAND H3G__106......
All the commands are in there and the links too
Click to expand...
Click to collapse
Well, thanks! I'll try it in the evening.
A last question: After doing the nandroid backup and firmware flash my HBOOT will be 1.39, am I correct?
Yes you are going to hboot 1.39.
But keep one thing in mind, only do one of the options. If you go for the nandroid backup you do not have to do the firmware flash......when you restore the nandroid backup completely including the boot.img and stock recovery you check in settings - about - softwareupdates for the official OTA and install that. The OTA will flash the hboot automatically and will update the software to JB :thumbup:
Mr Hofs said:
Yes you are going to hboot 1.39.
But keep one thing in mind, only do one of the options. If you go for the nandroid backup you do not have to do the firmware flash......when you restore the nandroid backup completely including the boot.img and stock recovery you check in settings - about - softwareupdates for the official OTA and install that. The OTA will flash the hboot automatically and will update the software to JB :thumbup:
Click to expand...
Click to collapse
Well, it came to my mind that I only have the phone with the Hutchison 3 branding, but it is unlocked and I have another provider. Does this conflict with the option to do the nandroid backup and checking for software updates?
And if not, I think I have to unlock the phone again and do that stuff to flash a custom rom?
Ai i can't answer your first question, never encountered that before .... as for the second question, with a nandroid backup you do not have to relock the bootloader. So after the updating process you flash back the custom recovery and flash a new JB rom.
Mr Hofs said:
Ai i can't answer your first question, never encountered that before .... as for the second question, with a nandroid backup you do not have to relock the bootloader. So after the updating process you flash back the custom recovery and flash a new JB rom.
Click to expand...
Click to collapse
Well, okay. So I will just test it, and if I don't get any updates I can switch back to my old version of ICJ am I right?
Yes ofcourse .... do a nandroid of the rom you are running now and after that you restore the stock nandroid backup.
Don't forget to flash the boot.img again when you return to the old one
Well,
I tried the nandroid backup from this thread but I only get some md5 checksum errors...
Then I tried it twice with the backup from here but here I get sometimes a black screen (display is ON) after the htc logo and sometimes it goes past the black screen and comes to the screen where you see "HTC ONE BEATS AUDIO" and there it gets stuck.
I also did a full wipe every time before doing the backup and I also flashed the boot.img from the backup
Any ideas? :/
cheers,
z3xi0n ;D
I got simillar effect while trying to restore backup from that thread
And im actually in a boot loop for allmost two weeks, so i'll stick around for some usefull ideas
When you read the OP of the first thread there is a workaround for the MD5 error
Mr Hofs said:
When you read the OP of the first thread there is a workaround for the MD5 error
Click to expand...
Click to collapse
Uh, my bad I'll try it again in the evening ^^ Thanks for helping a poor noob
status update ^^
Used the backup from here, searched for OTA update (got one), tried to install it. Phone switched into recovery and I got some errors. Looked it up in google, found this site and removed this part
Code:
assert(check_cid(getprop("ro.cid"), "00000000" , "11111111" , "22222222" , "33333333" , "44444444"
, "55555555" , "66666666" , "77777777" , "88888888" , "99999999" , "HTC_……);
After this I was able to install the update (in recovery, using "install zip from sdcard"). After the update the phone reboots and gets stuck on the HTC logo. Hboot is still on 1.12. Now I used my old backup cause I need the phone tomorrow again. Any ideas how to get the update fully working? :/
cheers ^^
Then i guess the update fails because you need a backup matching your cid too !
Because the nandroid backup was for another cid (O2 and orange backups where compatible with different cids)
You can try to only perform the firmware flash to update the hboot and then flash a JB custom rom after that.
Mh, okay. Then I'll try it with a firmware update. But I am a little bit confused because when I deleted the part with assert(check_cid(...)) etc. I saw my CID, H3G__106, in this part.
z3xi0n said:
Mh, okay. Then I'll try it with a firmware update. But I am a little bit confused because when I deleted the part with assert(check_cid(...)) etc. I saw my CID, H3G__106, in this part.
Click to expand...
Click to collapse
Hmm okey, well i can't shine a light on that im afraid, but if the nandroid fails (who said that the nandroid is 100% stock anyway, we believe the uploader on that ) your best chance is with the direct firmware flash
Am I right that I have to do it with this manual? And do I have to install at first this stock backup or can I flash the firmware directly on my acutal ROM?
1) go into fastboot and enter "fastboot oem lock" - the device will reboot
2) go into fastboot again and enter "fastboot oem rebootRUU" - there will be a black screen with a silverish HTC logo
3) enter "fastboot flash zip firmware.zip" (you need the firmware.zip from page 1 for this)
3a) enter the same again, the green bar under the logo should go to 100% (either after the first or second time)
4) enter "fastboot reboot-bootloader" to go back to your fastboot
5) unlock your device again with the unlock code ("fastboot flash unlocktoken Unlock_code.bin")
6) Restore your old boot.img (fastboot flash boot name_of_boot_file.img) and recovery (fastboot flash recovery name_of_recovery_file.img), make sure you copied them from the nandroid backup folder we created earlier into the folder that contains the fastboot.exe you're using.
(7) Reboot and you should now have Hboot 1.39 with your old boot and recovery.
(8) If it won't work we still have the backup ready to restore the old system, Hboot isn't changeable right now on S-ON devices outside of the RUU routine - so even if you restore your nandroid you should still have Hboot 1.39 now)
Click to expand...
Click to collapse
Yes thats correct. No neef to flash the stock recovery. Directly the firmware is enough. But reflash the rom with boot.img right after that....
---------- Post added at 12:07 PM ---------- Previous post was at 11:17 AM ----------
Any succes ?
Well, now I did the firmware flash, put ICJ 2.1 on the phone and it works, but the phone doesn't get my sim card. Any ideas? ^^
Uhm well......does that rom needs a modified boot.img for the higher hboots maybe ? Just like the CM10. I would try it first with a full sense JB rom to make sure that everything works as it should, or try CM10.1 ?
Did you checked that the hboot is actually upgraded ?
Or could this have something to do that you unlocked it from the carrier ?

Looking for RUU cid HTC_622

Screwed up rooting my phone and I've been trying to get it back to stock but I haven't been able to find the right RUU. I've gone through http://androidfiles.org/ruu/?dir=Endeavor and tons of other forums but I haven't had any luck. Here's the info for my phone:
cid: HTC_622
HBOOT 1.36
Radio: 5.1204.162.29
Any help would be greatly appreciated
We need the main version
Fastboot getvar version-main
version-main: 3.14.708.28
Mr Hofs said:
We need the main version
Fastboot getvar version-main
Click to expand...
Click to collapse
Yeah that one is still missing in action ! You can go here
http://forum.xda-developers.com/showthread.php?t=1975140
And download the matching nandroid backup. Flash the boot.img from it, make a full wipe in the recovery and restore the nandroid :thumbup:
thanks for all your help but I'm unable to transfer stuff to my phone. It won't boot into mass storage mode even from recovery
EDIT: HBOOT link isn't working
Mr Hofs said:
Yeah that one is still missing in action ! You can go here
http://forum.xda-developers.com/showthread.php?t=1975140
And download the matching nandroid backup. Flash the boot.img from it, make a full wipe in the recovery and restore the nandroid :thumbup:
Click to expand...
Click to collapse
just checked my link works fine....why doesn't mass storage work, do you get an error ?
flash this one if you havent got this version
https://www.dropbox.com/s/guvfqd7tp8acxg6/recovery 5.8.4.0.img
then navigate to mounts & storage - mounst as usb device (last option in the list)
sorry for the big time noob question but where do you find the boot.img how do you flash the boot.img
Mr Hofs said:
just checked my link works fine....why doesn't mass storage work, do you get an error ?
flash this one if you havent got this version
https://www.dropbox.com/s/guvfqd7tp8acxg6/recovery 5.8.4.0.img
then navigate to mounts & storage - mounst as usb device (last option in the list)
Click to expand...
Click to collapse
so mass storage works ?
you have to unpack the nandroid backup to the right folder on the sdcard (its in the OP of the link i sent you) then unfold the folders and check in the files of the nandroid backup. the boot.img is in there
Yeah i just put on TWRP instead of CWM. What are the commands to flash boot.img?
Well it depends on the nandroid backup if you need twrp or cwm !
Of the nandroid backup contains a boot.img file you need cwm, if it has a boot.emmc.won file you need twrp recovery !
Fasboot flash boot boot.img
or
Fastboot flash boot boot.emmc.win
Thanks for all of your help I ended up just throwing on Android Revolution HD and sticking with TWRP recovery. I guess CWM doesn't like my phone for some reason.
Ow oke ! :thumbup:
CASE CLOSED !
HTC One cant access the phone after flashing custom rom
I tried to flash the Android Revolution HD 71.1 Rom on my HTC One M7 ul. after completing installation my phone was not starting up. It stuck on the HTC logo and kept rebooting automatically. I also tried to install the Google edition but same result it keeps rebooting.
My phone Details:
HTC One M7 UL
HBOOT- 1.56.0000
RADIO- 4A.23.3263.28
Main OD Version was: 4.20.708.10 (Before flashing custom rom, NOW NO version number)
CID Number: HTC_622
I cant turn on the phone so that i can try other custom rom. Its Rooted, Unlocked and I have CWM installed. Now all i can do is go to fastboot option.
What should I do to fix this problem... Desperately waiting for reply.
ashik_nil said:
I tried to flash the Android Revolution HD 71.1 Rom on my HTC One M7 ul. after completing installation my phone was not starting up. It stuck on the HTC logo and kept rebooting automatically. I also tried to install the Google edition but same result it keeps rebooting.
My phone Details:
HTC One M7 UL
HBOOT- 1.56.0000
RADIO- 4A.23.3263.28
Main OD Version was: 4.20.708.10 (Before flashing custom rom, NOW NO version number)
CID Number: HTC_622
I cant turn on the phone so that i can try other custom rom. Its Rooted, Unlocked and I have CWM installed. Now all i can do is go to fastboot option.
What should I do to fix this problem... Desperately waiting for reply.
Click to expand...
Click to collapse
Download a proper rom. You have the HTC ONE and NOT the ONE X ! .....you are in the wrong forum
Sent from my HTC One_M8 using XDA Premium 4 mobile app
https://mega.nz/#!d9klVJCb!wLoTUI0dXWbxEff_kmVau19PGg0q8NwgnYvAyhqCI3A
RUU_ENDEAVOR_U_ICS_40_S_hTC_Asia_HK_yuhong_2.17.708.7_Radio_2.1204.135K.20_relea
please first of all check if its for this cid cause i think even if my HOX+ enrc2b its an international HOX+ the X.XX.708.X is for endeavour not for enrc2b, anyone?

[Q] Stock on HTC ONE white screen after OTA update.

Hi guys.
Finally today I receive the OTA upgrade to JB. First an smal upgrade was succesfully downloaded and installed, and then the firmware to upgrade the phone to JB (I had 4.03 custom rom).
After the phone install the JB upgrade the phone stuck on the HTC ONE white screen
I had a backup on the SD that let me recover the phone, I try to install the upgrade again, with the same luck. I read a post that said that erasing the SD will resolve the issue, and I have no better idea than do it!!! (yeah... really!!)
I read several post all day on XDA, I try to flash again the boot and ROM with the upgrade that I save on my PC, and with a Backup via
fastboot. But nothing work (I dont know if I did it right). I cant see the SD on fastboot, already try a factory reset, when I go to the recovery option on fastboot the phone just rebooted with no options.
My CID is BSTAR301
***UNLOCKED***
ENDEAVORU PVT SHIP S-ON RH
HBOOT-1.39.0000
CPLD-None
MICROP-None
RADIO-5.1204.162.29
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure boot: enabled
MODEM PATH: OFF
Dec 17 2012, 13:59:37
Attached are the backup files that I have in my pc and the OTA upgrade files that my phone download.
Here there are many people who know a lot of this!!
Please help me to recover my phone!
u say you are on a custom rom, But you tried to update OTA?
Restore phone to complete stock ( even recovery) then you can update.
you could use an RUU or maybe a nandroid
{< r o N o $ said:
u say you are on a custom rom, But you tried to update OTA?
Restore phone to complete stock ( even recovery) then you can update.
you could use an RUU or maybe a nandroid
Click to expand...
Click to collapse
Sorry, I mean I had the ORIGINAL ROM (4.03), the only change that I made was root the phone.
My CID is BSTAR301, I only have the backup files that I copy to my pc and the OTA upgrade that the phone download. I attach the images of the files that I have.
Could you please tell me how to restore it to complete stock with the commands? which files should I use?
Thanks for you help.
guillerhcp said:
Sorry, I mean I had the ORIGINAL ROM (4.03), the only change that I made was root the phone.
My CID is BSTAR301, I only have the backup files that I copy to my pc and the OTA upgrade that the phone download. I attach the images of the files that I have.
Could you please tell me how to restore it to complete stock with the commands? which files should I use?
Thanks for you help.
Click to expand...
Click to collapse
I assume that you first installed CWM or TWRP recovery to root your HOX, and if you make backup of your recovery this is CWM or TWRP recovery.img, not stock recovery.img that is came with phone because you reflashed original one with TWRP or CWM and official ROM need official recovery.img. I hope that you make nandroid backup before root with TWRP or CWM because is it "must to do" in every installation guide. If so, when you wanted to update via OTA for official JB you needed to:
1. reverse to stock software (for you, you needed only to unroot or use nandroid backup if you have yours, if not try to find one in xda one x forum matching your current CID and main-version)
2. reverse to stock recovery.img that is matching your CID (exact matching) (you need to find it on xda one x forum section) - i see that you have firmware folder but dont know is it from your backup or from OTA, if it is from OTA than you can use recovery.img from that folder to flash stock recovery.img via fastboot commands (only recovery.img)
3. then you can do official JB update via OTA
And then if you have need to custom ROM you need flash again CWM or TWRP recovery.img
Also you can get full stock with RUU but RUU must fully match your CID and main version, but RUU isn't available for every phone version, and after RUU you can do officall OTA JB update (for RUU you need to lock bootloader)
Information that can help us is yours phone current main version (fastboot getvar version-main)
hpnxfox said:
I assume that you first installed CWM or TWRP recovery to root your HOX, and if you make backup of your recovery this is CWM or TWRP recovery.img, not stock recovery.img that is came with phone because you reflashed original one with TWRP or CWM and official ROM need official recovery.img. I hope that you make nandroid backup before root with TWRP or CWM because is it "must to do" in every installation guide. If so, when you wanted to update via OTA for official JB you needed to:
1. reverse to stock software (for you, you needed only to unroot or use nandroid backup if you have yours, if not try to find one in xda one x forum matching your current CID and main-version)
2. reverse to stock recovery.img that is matching your CID (exact matching) (you need to find it on xda one x forum section) - i see that you have firmware folder but dont know is it from your backup or from OTA, if it is from OTA than you can use recovery.img from that folder to flash stock recovery.img via fastboot commands (only recovery.img)
3. then you can do official JB update via OTA
And then if you have need to custom ROM you need flash again CWM or TWRP recovery.img
Also you can get full stock with RUU but RUU must fully match your CID and main version, but RUU isn't available for every phone version, and after RUU you can do officall OTA JB update (for RUU you need to lock bootloader)
Information that can help us is yours phone current main version (fastboot getvar version-main)
Click to expand...
Click to collapse
Thanks for your help! I got the an RUU, after that I sent my backup to SD and now I have 4.0.4.
Now my phone show me a message to install the OTA to 4.1.1, but when I select install the phone make a reboot and show me CWM recovery with the message:
Finding update package...
E:unknown volume for path [INTERNALSDCARDownload/OTA_ENDEAVOR_U_JB_S_BSTR_ESN_3.14.515.36-2.17.515.1....
E:Can't mount INTERNALSDCARD...
Installation aborted.
Why the phone can't mount the SD?
You need a stock recovery. Do :
Fastboot getvar version-main
And post the outcome !
Edit :
4.0.4 software....you need this recovery and then install the ota again
http://db.tt/U5CK4noo
Mr Hofs said:
You need a stock recovery. Do :
Fastboot getvar version-main
And post the outcome !
Edit :
4.0.4 software....you need this recovery and then install the ota again
This is the result:
C:\CustomRUU>Fastboot getvar version-main
version-main: 3.14.515.36
So... I just need to install the recovery that you send me, reboot and try to install the OTA?
Click to expand...
Click to collapse
Mr Hofs said:
You need a stock recovery. Do :
Fastboot getvar version-main
And post the outcome !
Edit :
4.0.4 software....you need this recovery and then install the ota again
Click to expand...
Click to collapse
THANKS HOFS!!!
After installing the stock recovery 2.17, JB was installed successfully.
You have no idea how much appreciate your help!
Thank you!!!!

Categories

Resources