Develop Bugs

[ROM][11/11/10][G2/DZ] NO SENSE 1.22.531.8 HTC Vision Stock with Online Kitchen (r1)

I'm pleased to present my repack of the stock ROM for the HTC Vision! READ THIS WHOLE POST BEFORE YOU START! No, really, it contains everything you need to know.
Remember that if you use this ROM, you do so entirely at your own risk!!
About MoDaCo stock ROM repacks
Unlike a MCR (MoDaCo Custom ROM) release, a stock ROM repack is as close to the stock ROM as possible. Only root / Superuser and an insecure boot image is added. The benefits of the repack are providing a rollback option in update zip format as well as providing an online kitchen to remove parts that are not required.
A MCR release of this ROM is also available!
Requirements
In order to use this ROM on your device, you must have a custom recovery image installed (Clockwork Mod).
THIS ROM SHOULD RUN ON BOTH THE G2 AND THE DESIRE Z!
Features
Repack of the 1.22.531.8 (OTA) ROM
Pre-rooted with su and Superuser Permissions by ChainsDD
Insecure boot image (ro.secure=0)
Changelog
Please see the post below this one for the changes in each release.
Installation
To install this ROM:
Download the zip file of your choice from the links below (or the online kitchen) and copy to your SD card
Restart your device in recovery mode
PERFORM A NANDROID BACKUP FROM THE MENU
Select the option to apply an update zip, and select the zip file you copied to your memory card
Upgrading
No wipe is explicitly required in order to use this ROM (unless you are coming from a 'Sense' ROM), however if you do encounter issues of any kind, it is recommended that you wipe your device and reproduce the issue before raising it here.
Downloads
This ROM is now available in the online kitchen - see the post below for details! In addition to the kitchen, a prebaked download is available.
DOWNLOAD
Thanks
It's impossible to mention everyone who contributes to the Android community by name, but to everyone out there who does great work and shares it with us all - you have my gratitude and respect.
And finally...
Details on how to donate should you wish to do so are in download topic at MoDaCo.
Enjoy!
P

Changelog
11/Nov r1
Initial Release

Let me know how you get on people!
MCR'd version and Sense stock / MCR for both G2/Z to follow (soon)!
P

OMG
jaws drop
paul you da man

Hah, you ain't seen nothing yet... wait till you see what i'm dropping tomorrow!
P

Need a drink now, long day.
P

yes . Happy day.
Thanks.

Well done Paul, thank you!

So we need clockwork on the Z to make this work? hpw do i install clockwork on Z, only says G2?

got it flashed but keep getting "The process Android.process.media has stopped unexpectedly. please try again any ideas?

Media error hasnt come up in a while but ive been on wifi the whole time and i cant get 3G to pop up at all meaning i have no mobile data and APN's are correct
im in australia on OPTUS

shaunm1989 said:
So we need clockwork on the Z to make this work? hpw do i install clockwork on Z, only says G2?
Click to expand...
Click to collapse
check the EZ-DZ thread:
http://forum.xda-developers.com/showthread.php?t=835777
updated with easy S-OFF and clockwork tips

Radio
Hi.
Rom is fantastic, but where is Radio app ?
THX

How do we install the overclock kernel after flashing this rom?

foxfire235 said:
How do we install the overclock kernel after flashing this rom?
Click to expand...
Click to collapse
To do it with the vision_oc u need to use the file from the G2 Forums

You can actually use bacon bits with this rom. I over clocked to 1.5ghz with this rom and bacon bits, was fast as all hell, but I missed sense too much
JD
Sent from my HTC Desire Z Beast

Sweet. I just flashed bacon bits and it works great!

[ignore]Oops, posted on wrong post![/ignore]

Will this rom work on a North American Desire Z (850/1900/2100 WCDMA)?

Yes, it's working fine on my unlocked Bell D-Z.

[Q] Firt ROM flash - Help!

Hi there guys want to flash this ROM
http://forum.xda-developers.com/showthread.php?t=1625816
However im very much a newbie at this (This will be my first flash) and the instruction posted in that thread make no sense to me..
Could someone please give a more thorough guide?
PS: I am rooted.

Put the downloaded rom to your SD Card of your HTC One X
Boot to hboot (bootloader that is) - fastboot, then run this: Boot.img flasher for dummies
Boot to recovery after installing the kernel
Do a full wipe if you are coming from another rom
Install rom and follow Aroma instructions
pretty simple really whats confusing about there guide mate?

Thanks for the help bud! But whats the kernel? And does stock sense that i opened the phone with count as another ROM, and whats aroma? And how do you do a full wipe?
Much Thanks

JDBurnie said:
Thanks for the help bud! But whats the kernel? And does stock sense that i opened the phone with count as another ROM, and whats aroma? And how do you do a full wipe?
Much Thanks
Click to expand...
Click to collapse
hehe so many questions..i see if i can help
kernel is the boot.img that is in short what makes the phone tick aka performance
Explanation:
What Is A Kernel?
The central component of most operating systems. Its responsibilities include managing the system’s resources (the communication between hardware and software components) and can provide the lowest-level abstraction layer for resources (especially memory, processors, and I/O devices)
stock sense is just framework and launcher as well. what you are using now is your stock rom. aroma is just an installer program that helps you remove or install mods that rom developers have added to it..makes things easier and simpler for us the users. go here for better explanation
full wipe again it will give you the option in aroma to do that...make sure you backup the rom first before you flash the custom rom

[KERNEL TOOL] Multi Kernel installer - ARHD 7/9 - WINDOWS/LINUX/MAC - discontinued

I'm not updating the scripts anymore, only use it for private ease-of-use. Feel free to use the scripts, copy / modify, if you have any ideas or want to work with it. Thanks for the support, but there are more (better) tools available at the time now.
Cheers, Maseo!
==========================================
Hello Folks!
So you're running Android Revolution HD and you want to try a differtent kernel ey?
But you don't know how to flash a kernel, which modules you need or you're just plain lazy (like me ) and want to have it done for you.
I present to you, my Multi kernel installer!
*Works on Windows XP, Vista, and Seven, Linux (Ubuntu tested), Possibly Mac (need testers..)
Want to see a working demo?
Windows:
Linux/Mac:
How does it work?
It's a batch file that uses ADB and fastboot for pushing modules and kernels to your HOX. I've added an option to select different kernels and it will push the matching modules pack as well if neccessary.
The script pushes the modules to your phone, so you dont have to CWM flash them, and writes the kernel through fastboot for you! You only have to run the script!
How to use the file:
If you have dropbox, sync this folder, to your dropbox account. This way you'll be up to date when i add more kernels and/or options.
1.B If you don't have Dropbox, register for a free dropbox here. It's the easiest way to keep the files in sync for updates, plus you'll get free 500mb of extra storage.
1.C Or if you use Google Drive: click on this link
Make sure your phone is on, USB debugging is enabled, and you're on ARHD 7.x
ONLY FOR WINDOWS USERS: Run RUN_ME_WINDOWS.bat, Follow the steps. If done right ADB will push the modules (if necessary) to your phone, reboot, and install the selected kernel.
ONLY FOR LINUX/MAC USERS: Open the MAC folder and run linux_test.sh in terminal, Follow the steps. If done right ADB will push the modules (if necessary) to your phone, reboot, and install the selected kernel.
Done!
If you have any questions, just leave a comment in the thread and i'll try to get to you as quick as possible!
Any tips, remarks or feedback is highly appreciated.:good:
Happy flashing!
Special thanks to:
Mike1986 for making his amazing Rom!
GuyAdams for repacking all the kernels and moduls, tips and feedback.
Maseo

Which kernels are available?
ARHD7:
EternityProject_V0.92b
EternityProject_3.4v0.23
EternityProject_3.4v0.24
Faux 004b3 (with modified governer), and 004b34
Franco_R11
Franco_R12
Android Revolution HD Stock
ARHD9:
Faux 007 VF
Franco R16
NCX 080 OC
Eternity 3.4 0.38 OC
ARHD Stock​

Updates:
[23-06-2012] Released the first working multi-batch file with some kernels
[23-06-2012] Added Franco's R11, EternityProjects3.4 V0.22, Faux's 003b9
[24-06-2012] Repacked RAR-File, Removed bugged Faux 003b9, replaced with 003b10.
[24-06-2012] Added a RUN_ME_WINDOWS-NT-ONLY bat file, 'choice' isn't a command on windows 2K and XP. Replaced code.
[25-06-2012] Removed RUN_ME.bat and replaced with general working RUN_ME_WINDOWS.bat, removed Faux 003b7 (old), added Eternity V0.23 and Default ARHD stock kernel.
[25-06-2012] Added demo video.
[02-07-2012] Added Linux Demo video, Franco R12, Faux 4b1
[03-07-2012] Finished Linux-script!!!
[04-07-2012] Added Faux 4b3
[06-07-2012] Added Faux 4b4 and Eternity V0.24 - Debug mode for windows added

reserved three

its arhd i think!

kryptoner said:
its arhd i think!
Click to expand...
Click to collapse
Sharp eye.. Im still a bit drunk from last night i guess. Edited the title! :silly:

at 1.b, it says error creating link...
batch file dies after choosing 2 (eternity 3.x kernel)
'choice' is not recognize as a command
Press any key to continue...

cYbOrG5 said:
at 1.b, it says error creating link...
batch file dies after choosing 2 (eternity 3.x kernel)
'choice' is not recognize as a command
Press any key to continue...
Click to expand...
Click to collapse
I'll get right on it. Seems the Rar-file is borked. Should be fixed now.
Which windows version are you running on? It works fine on vista and 7, but could fail on 2K and XP due to 'choice' being left out.
Try running: RUN_ME_WINDOWS-NT-ONLY.bat
- Removed Faux's 003B9 because of the bug in the Kernel replaced it with 003b10

Great work mate, I'll update the kernels thread OP with details.

GuyAdams said:
Great work mate, I'll update the kernels thread OP with details.
Click to expand...
Click to collapse
Great to see you've seen it! I'll update the script tomorrow morning with Eternity_V0.23.
I'll see what else I can do to improve or expand the script. Any ideas?
Sent from my HTC One X using XDA

- Removed RUN_ME.bat and replaced with general working RUN_ME_WINDOWS.bat.
- removed Faux 003b7 (old), added Eternity V0.23 and Default ARHD stock kernel.
- updated the rar file.
- added demo-video.

after kernel flash, why not reboot to recovery and cwm flash modules if required...so that the user will not manually flash it..just a thought

cYbOrG5 said:
after kernel flash, why not reboot to recovery and cwm flash modules if required...so that the user will not manually flash it..just a thought
Click to expand...
Click to collapse
The script already flashes the modules through ADB when you're running it, and flash the kernel after. No need to manually flash the modules

grrrr..... just ignore

thunder07 said:
grrrr..... just ignore
Click to expand...
Click to collapse
I assume you've got it worked out ...

Hi, I'm always on the HOX forum everyday, I read all the threads but I have a noob question..!!!
Whats is Kernel? and What it does and the difference between stock Kernel and Faux or Franco R11, etc...
Cheers and sorry for the noob question..!!

limx said:
Hi, I'm always on the HOX forum everyday, I read all the threads but I have a noob question..!!!
Whats is Kernel? and What it does and the difference between stock Kernel and Faux or Franco R11, etc...
Cheers and sorry for the noob question..!!
Click to expand...
Click to collapse
See it like this: your phone is a car. Your ROM and default kernel present the engine.
A different kernels updates and tweak the engine. Giving it more features, possibly better (battery) performance, a smoother experience. Etc.
The good thing is you can always go back to the default kernel by re-flashing your ROM or selecting the default stock Kernel from my installer.
Sent from my HTC One X using XDA

My humble requests:
- Google Drive instead/too
- MAC support
Thank you for your effort ! Really a time saver
---------- Post added at 10:01 AM ---------- Previous post was at 09:51 AM ----------
And now I'll try it
Just a question:
On ARHD 7.1 the Franco_R11 (which I see is 7.0.0) will be fine ?
In case of issues, I just flash over it the stock 7.x , right ?
Thanks

chareos12 said:
My humble requests:
- Google Drive instead/too
- MAC support
Thank you for your effort ! Really a time saver
---------- Post added at 10:01 AM ---------- Previous post was at 09:51 AM ----------
And now I'll try it
Just a question:
On ARHD 7.1 the Franco_R11 (which I see is 7.0.0) will be fine ?
In case of issues, I just flash over it the stock 7.x , right ?
Thanks
Click to expand...
Click to collapse
I'll see if i can add a google-drive upload too (i don't use it personally..), ill try to figure out how to run in on a mac.
Regarding the kernel, yes. The kernels are made for 7.x, so that works fine.:good:

trying to download the rar-file,
Error Creating Link
There was an error creating your link. Please try again.
Of course, trying again brings no joy.

[TIPS] 10 Tips Before Flashing Custom ROM

Hi, everybody!
Because i'm new junior member here, i want to share some tips. If you think this post helpful, just press thanks, ok! :fingers-crossed:
Here are 10 tips before flashing custom rom :
1) Read the rom information and compatibility before downloading, like the base firmware, if your firmware is lower than rom firmware, please upgrade.
2) Recovery can be used for flashing the rom, CWM/Stock. Don't use stock recovery if the rom support only CWM.
3) Kernel used in the rom like kuro kernel and repencis. Is the kernel supports a2sd or init.d and the performance and compatiblity.
4) Features in the rom, like rooted, deodexed, zipalign, a2sd, tweaks, bravia or beats audio engine, 4wayboot, EPM, and the STYLE of the rom.
5) Performance the rom like fast and stable. You can benchmark it with benchmarking tools like AnTuTu Benchmark and feel it yourself.
6) Custom tweaks supported by the rom. If the rom support this, you can manually tweaks the rom, but don't share it WITHOUT PERMISSION by the creator.
7) This is for your phone safety if any malfunction caused after flashed custom rom, BACKING UP your current rom with CWM feature, Nandroid. You can read from this. But, to recovery don't do recovery from CWM Nandroid, because the MD5 sum is'nt same with your new rom. Just follow the step on the link.
8) CWM Recovery must be have. This link to download cwm
9) Wiping data/reset, cache partition, and dalvik-cache is required. Before do this you must follow step 7, because it will remove your apps, and your system data
10) This will be very very very required, the rom ZIP file. Haha! ​
That's all i've been shared for you. But, where's my "THANKS" everybody? If you think this helpful for you, just press it! HAHAHA :laugh:

windBox said:
Hi, everybody!
Because i'm new junior member here, i want to share some tips. If you think this post helpful, just press thanks, ok! :fingers-crossed:
Here are 10 tips before flashing custom rom :
1) Read the rom information and compatibility before downloading, like the base firmware, if your firmware is lower than rom firmware, please upgrade.
2) Recovery can be used for flashing the rom, CWM/Stock. Don't use stock recovery if the rom support only CWM.
3) Kernel used in the rom like kuro kernel and repencis. Is the kernel supports a2sd or init.d and the performance and compatiblity.
4) Features in the rom, like rooted, deodexed, zipalign, a2sd, tweaks, bravia or beats audio engine, 4wayboot, EPM, and the STYLE of the rom.
5) Performance the rom like fast and stable. You can benchmark it with benchmarking tools like AnTuTu Benchmark and feel it yourself.
6) Custom tweaks supported by the rom. If the rom support this, you can manually tweaks the rom, but don't share it WITHOUT PERMISSION by the creator.
7) This is for your phone safety if any malfunction caused after flashed custom rom, BACKING UP your current rom with CWM feature, Nandroid. You can read from this. But, to recovery don't do recovery from CWM Nandroid, because the MD5 sum is'nt same with your new rom. Just follow the step on the link.
8) CWM Recovery must be have. This link to download cwm
9) Wiping data/reset, cache partition, and dalvik-cache is required. Before do this you must follow step 7, because it will remove your apps, and your system data
10) This will be very very very required, the rom ZIP file. Haha! ​
That's all i've been shared for you. But, where's my "THANKS" everybody? If you think this helpful for you, just press it! HAHAHA :laugh:
Click to expand...
Click to collapse
Ask mod to move this to proper section,bro.
sent while doin' some burnouts

to what section??

you mean i post this in the wrong section bro..??

windBox said:
you mean i post this in the wrong section bro..??
Click to expand...
Click to collapse
Yupz.. this is development section.. u can put this to general or q/a section

ok..i'm sorry..i have been tell the mr.moderator to move this thread..

Should be in general bro

Moved to General.

[Kernel][Kexec][aromaKLflasher] Kernel Lighter (KL) Beta 11[Change Kernel WITHOUT PC]

Please Don't Quote This Post,
It's Just way too big and would make any comment look stupid,
Thanks
Just When You Thought Your Favourite Dev Is Out Of Ideas... He Comes Up With This
ok so alot are complaining how we can't flash kernel away from the pc among other things (which ill get to later ), (mostly @One-X-master)
so i looked for a way to get around this and found Kexec as the answer.
Wiki said:
In computing, kexec (kernel execution) is a mechanism of the Linux kernel that allows "live" booting of a new kernel "over" the currently running kernel. kexec skips the bootloader stage (hardware initialization phase by the firmware or BIOS) and directly loads the new kernel into memory, where it starts executing immediately. This avoids the long times associated with a full reboot,and can help systems to meet high-availability requirements by minimizing downtime.
Click to expand...
Click to collapse
however, with that comes managing online hardware which is somewhat problematic,
thus that prompted few people to come up with an ingenious solution called Kexec-hardboot.
Kexec-hardboot:​This works by loading the kernel into memory and force restarting the phone with new kernel.​
All of that with some ramdisk tweak allowed me to set a kernel at boot and restart to it,
avoiding having to flash it in the 1st place
Updating the kernel is called flashing..
A Flash is also what precedes Thunder
its also refered to as Lightning, Thus I came up with the name Kernel Lighter
Lighter= To Set Things On Fire/To Ignite (The Kernel)
Thus this is a kernel igniter
I Know, i've got to much time on my hand.
If you have a smart name, please do suggest.​
Special Thanks:​ @Tasssadar: For His N7 Port, which made this port a breeze and for his help in debugging.
@Alex-V: Currently using his kernel as Base Kexec Kernel.
@Androguide.fr: For his recovery-less flash method.
@amarullz: For His AromaFM Source Code.
@LlabTooFeR: For His Stock Kernel.
@faux123: For His Kernel Source.
@mkasick: For The Original Port.​
Sources:​Alex-V 1.7 Kernel
Hardboot Patch
Faux Kitkat Kernel
AromaFM KL​
Download Link In Post Below
​

Always have a backup.
Attachement & How-TO
ALL THE STEPS MUST BE FOLLOWED.
Requirements
S-off/Unlocked Bootloader
Android App & Recovery App
Fastboot flash boot Zeus.img
For ZeusKL.v10.img (New Layout) You must first switch to the new layout
Flashing Kernels Though Recovery
Boot Into Recovery
Flash AromaFM-KL.zip
Select Kernel Zip To Flash
Choose Flash Location
Choose Boot.img
Yes/No To Flash Zip (useful for flashing modules)
Reboot
Flashing Kernels Though Android(deprecated)
Start KL Android App
Choose Kernel Zip*
Kernel & Ramdisk
Reboot To Recovery --> Flash Modules
Reboot
* For zips to be listed, they must be placed in /sdcard/modules/
* otherwise click browse and happy hunting​
Something Went Wrong:
Let say the phone wouldnt boot during kernel update after using the app,
the best solution would be to go back to stock kernel, look at the recovery flashable zips in Extras section,
If none seem to fit, try another custom kernel
if you still had no luck booting, you should try flashing that kernel through fastboot and see if it makes any difference.​
Warning!!
Note: All the zips provided are flashable through both The App & Recovery... but I recommend recovery
BUT DON'T FLASH THE KEXEC (KL.Zeus.img) KERNEL THROUGH THE APP or Recovery,
as it will continuously boot itself over and over and over again.​
Download Link In Post Below

Downloads
Kexec Kernel: KL.Zeus.img(CM12 Based)(V10)(Old Layout Only)
Kexec Kernel: KL.Zeus.img(CM12 Based)(v11)(New Layout Only)
Android App: KernelLighter.apk(No longer in active development, use the Recovery App instead)
Recovery App: AromaFM-KL Flasher(v4.1)(ZeusKL v9- only)
Recovery App: AromaFM-KL Flasher(4.6)(ZeusKL v10+ only)
Extras(deprecated)
Sense 5 Stock Kernel(Works on Sense 4+)(courtesy of LlabTooFeR) flash via recovery
ASOP/CM10.1(Android 4.1.2/4.2.2) flash via recovery
ASOP/CM10.2(Android 4.3) flash via recovery
Archieve
Multirom
ZeusKL

Thunder07 said:
& Another One.
Click to expand...
Click to collapse
Can't wait to try, sound incredible

Awesome! Looking forward to try it.
Sent from my Nexus 7 using Tapatalk 4

Someone tried it?
Never again without Sense 5! *~* <3

This i call development, thanks for that solution.

TouchscreenLover1 said:
Someone tried it?
Never again without Sense 5! *~* <3
Click to expand...
Click to collapse
i made a small typo in one of the files..
after flashing zip
do this
adb shell
mount /data -o rw
echo /data/boot/Kernels/Stock/boot.img-zImage>/data/boot/kernel
echo /data/boot/Kernels/Stock/boot.img-ramdisk.gz>/data/boot/ramdisk
Will Fix Zip soon
Edit: FIXED
Dexxmor said:
This i call development, thanks for that solution.
Click to expand...
Click to collapse

Anyone a Sense 5 Kernel.zip? Kexec boots a descriptet, will try this solution.

Dexxmor said:
Anyone a Sense 5 Kernel.zip? Kexec boots a descriptet, will try this solution.
Click to expand...
Click to collapse
this works on both sense 5 and 4+
i had this running for almost a week now on sense 4+
and just moved to sense 5 and thought it will be a good time to release this.
The Stock kernel comes from sense 5 ROM

I know, but back to 4.1.1 is not a solution for me (Sense 5 is the dealbreaker with AOSP ROMs )
Another Question, if i change to AOSP, it will work too? or must we flash (an not realeased) Kexec AOSP kernel? (i ask not for me, i ask for everyone on AOSP with ORD xD )

Dexxmor said:
I know, but back to 4.1.1 is not a solution for me (Sense 5 is the dealbreaker with AOSP ROMs )
Another Question, if i change to AOSP, it will work too? or must we flash (an not realeased) Kexec AOSP kernel? (i ask not for me, i ask for everyone on AOSP with ORD xD )
Click to expand...
Click to collapse
you dont have to go back to 4.1.1, this will work with sense 5 rom
if you want to use AOSP you must follow the custom kernel guide.

Ahh, (my english is bad..) i think we misunderstand each other, i asked for an Sense 5 kernel.zip to try your "Flash kernel in Recovery" Solution, it exists not so many Kernel.zip with the "Flash Kernel Script" to flash the kernel in recovery... I hope its clear what i mean

this wiil be work on maximus 21 ?

Yes

Dexxmor said:
Ahh, (my english is bad..) i think we misunderstand each other, i asked for an Sense 5 kernel.zip to try your "Flash kernel in Recovery" Solution, it exists not so many Kernel.zip with the "Flash Kernel Script" to flash the kernel in recovery... I hope its clear what i mean
Click to expand...
Click to collapse
im not 100% sure, but if you're looking for the zip, its in the 2nd post
the 1st time you must flash the kernel through fastboot AND zip through recovery,
later i will make an app that will work to replace kernels.
but even that all will require 1 flash through fastboot.
NOTE:
the zip contains to kernel, one that you flash in fastboot
one that will be copied to /data/boot/
the 1st is kexec which will boot the one in /data/boot/

Not clear enough xD, this (the kernel.zip) was not a request to you, it was an request to somebody to make me a flashable kernel zip, as an example repacked Alex-V kernel for Sense 5, to test this.
Its late here, so my explanation will suffer, sorry for that.

Dexxmor said:
Not clear enough xD, this (the kernel.zip) was not a request to you, it was an request to somebody to make me a flashable kernel zip, as an example repacked Alex-V kernel for Sense 5, to test this.
Its late here, so my explanation will suffer, sorry for that.
Click to expand...
Click to collapse
ok that was clear enough,
so far as far as i hear,
only trips kernel work with sense 5

Thanks, sorry for my poor english.
---------- Post added at 11:31 PM ---------- Previous post was at 11:18 PM ----------
EDIT: Now we can flash kernel without a PC, testet and it worked.

So, we can flash kernels through the rom itself by replacing boot.img in data/boot and reboot, can't we ?