Hello everyone! Thanks to @educk and @h0rn3t for their awesome dualboot project for ancora, and @theloneseeker for his amazing tutorials, I've managed to make ION kernels compatible for dualboot in secondary ROMs, in other words, you're primary ROM can be ION or non-ION, but the secondary ROM had to be non-ION build to work, but now, I've managed to make ION builds dualboot compatible. Therefore, CyanogenMod 10.1 beta 3, CyanogenMod 10.2 alpha 5, CyanogenMod 11 20140323 build (the final 20140413 seems to be unstable for some) and Dark CyanogenMod beta 3 can be installed as secondary ROMs. The procedure on how to dualboot is mentioned in this thread http://forum.xda-developers.com/showthread.php?t=2469803, but I will still provide you with a similar guide in order to avoid errors.
**Installation Guide**:
1- Download the Dualboot1.8.apk from the mentioned thread above in the downloads section.
2- Install busybox and the Dualboot1.8.apk and grant the app root access.
3- Tap on Partitions and set the partition table according to your preference (I have a 4Gb external SD card so there are no exact values for everyone). This step takes most time so be patient.
4- Once done, tap on Tools and then Prepare flashable zip, and direct it to the ROM.zip you want to have as your secondary ROM (ION builds are now working)
5- Choose to wipe data and cache, then choose to Flash now. In recovery, tap on flash untrusted zip and after flashing is done, reboot.
6- Using a file explorer, you will see on your internal SD card that a Dualboot folder exists, and according to your secondary ROM, create a 4.2.2 (for CM 10.1) or 4.4.2 (for CM 11) and place the corresponding boot2.img that I provided. So, you should have something like Dualboot/4.4.2/boot2.img for example.
7- Go back to the Dualboot app and tap on Switch
Viola! Now, you will have ION build secondary ROM! You can have two 4.4.2 ROMs as well, or any other combination
NOTE: The kernels I made are 100% tested by me and are working with no issues whatsoever.
Credits:
-CyanogenMod Team
-Mr. Arne (arco68) for all his work.
-Mr. Radu (arsradu) for his kernel collection and bringing CM 10.2 for our device.
-Osama (Madridii) for his kernels and all his wonderful work and D CM 11 :highfive:
-Daniel (theloneseeker) for his amazing tutorials
-educk and h0rn3t for bringing dualboot feature to the i8150! :victory:
-Roderick (Tazerick) for motivating me
-lafactorial for his powerful Khan Kernel!!
-hurtsky for the rock solid HurtSky kernel!
-sir mordred for bringing TRIM to the ol' i8150 (perfectly working with dualboot)
P.S. If any user wants to have his custom kernel work with dualboot, please give the name of the kernel, the kernel version, the linux version and a link to download the kernel, and post what ROM the kernel works with (e.g. xxx kernel version x.xx.xx working with CyanogenMod X.X) and I will do my best in making the kernel work with dualboot.
I AM responsible for any damage that may happen to your device. I do not own any of the kernels or ROMs or apps that have been used to make this project possible. If any user encounters an issue, kindly report the issue and post exactly what your steps are. The guide posted here is the same as educk mentioned but maybe more simplified. I do not deserve any credit, I only made the kernels dualboot compatible but I didn't build these kernels. The kernels posted are the default kernels of the ROMs (simply extracted the boot.img only). Good luck to everyone
Download links:
- https://drive.google.com/file/d/0BxQMaqAowdtsYkl4WnItQ3dfbDA/edit?usp=sharing
- https://drive.google.com/file/d/0BxQMaqAowdtsRDFmTjRBaGdJU1U/edit?usp=sharing
- https://drive.google.com/file/d/0BxQMaqAowdtsRW1HNlQzQjJ1QkU/edit?usp=sharing
- https://drive.google.com/file/d/0BxQMaqAowdtsWk5EVVF5VlM1ZUU/edit?usp=sharing
If any link doesn't work, I will add mirrors
XDA:DevDB Information
Ancora DualBoot, Kernel for the Samsung Galaxy W I8150
Contributors
Paul_Kolanjian, arco68, educk, h0rn3t, arsradu, Madridii, theloneseeker, lafactorial, hurtsky
Kernel Special Features: Dualboot + All awesome kernel features made by the respective developers
Version Information
Status: Testing
Created 2014-04-23
Last Updated 2014-08-21
More kernels support
Added CyanogenMod 10.2 and 11 ION kernels linux 3.4.86 dualboot from Mr. Radu's kernel collection
Added KhaN Kernel 3.4.87 [362 MB] dualboot. Big thanks to the one and only lafactorial!!
Added HurtSky Kernel v1.3. A warm thank you for the senior member hurtsky for his kernel
Added CyanogenMod 10.1 Beta 4 Linux kernel 3.4.89.
Added CyanogenMod 10.2 Linux kernel 3.4.89.
Added CyanogenMod 11 Linux kernel 3.4.91 which is for latest CyanogenMod 11 built by Mr. Arne on 21st of May.
Added HurtSky kernel v1.5 Linux kernel 3.4.90 and HurtSKy kernel v1.5.1 Linux kernel 3.4.91.
Added CyanogenMod 11 kernel based on 25th of May build by Mr. Arne.
Added KhaN Kernel Linux 3.4.91 [360 MB] with TRIM support. Thank you sir mordred for all your wonderful effort and lafactorial for updating your kernel with a blazing update!
Added CyanogenMod 11 Linux kernel 3.4.100 from the 1st of August build of Mr. Arne
Added Hurtsky Kernel v2.6 Linux 3.4.101
Added K^Kernel v1.5 Linux Kernel 3.4.101 416 MB thanks to the best of the best XDA Recognized Developer Christopher83
Download links:
- CM 10.2 Linux 3.4.86 https://drive.google.com/file/d/0BxQMaqAowdtsWmRnc1NrVzEwRlU/edit?usp=sharing
- CM 11 Linux 3.4.86 https://drive.google.com/file/d/0BxQMaqAowdtsY0l0TG1TX3UyQk0/edit?usp=sharing
- CM 11 KhaN Kernel Linux 3.4.87 https://drive.google.com/file/d/0BxQMaqAowdtsYkszS2xuTnR4Rzg/edit?usp=sharing
- HurtSky Kernel Linux 3.4.83 https://drive.google.com/file/d/0BxQMaqAowdtsYXExamtWbEdXRVE/edit?usp=sharing
- CM 10.1 Beta 4 https://drive.google.com/file/d/0BxQMaqAowdtsUDl5RktlODdOcU0/edit?usp=sharing
- CM 10.2 Alpha 7 https://drive.google.com/file/d/0BxQMaqAowdtsNkxqR0dQTWd2MGM/edit?usp=sharing
- CM 11 21st of May https://drive.google.com/file/d/0BxQMaqAowdtsY0x2UXF2cUhkY28/edit?usp=sharing
- Hurtsky kernel v1.5.1 https://drive.google.com/file/d/0BxQMaqAowdtscUIxRkdxX2FPQ3M/edit?usp=sharing
- Hurtsky kernel v1.5 https://drive.google.com/file/d/0BxQMaqAowdtsUXA1dVJ4d2Jfc3M/edit?usp=sharing
- CM 11 25th of May https://drive.google.com/file/d/0BxQMaqAowdtsRC1mNVNTaDI0QkU/edit?usp=sharing
- CM 11 TRIM Kernel (based on KhaN Kernel) https://drive.google.com/file/d/0BxQMaqAowdtsVWtvTUpySTV4bDQ/edit?usp=sharing
- CM 11 1st of August https://drive.google.com/file/d/0BxQMaqAowdtsZ09XMEtxYmZYV28/edit?usp=sharing
- Hurtsky kernel v2.6 https://drive.google.com/file/d/0BxQMaqAowdtsdmxJcFRNZXdKQVE/edit?usp=sharing
- K^Kernel v1.5 416 MB https://drive.google.com/file/d/0BxQMaqAowdtsWW42ZVpKaUtOM0U/edit?usp=sharing
***UPDATE***: Thanks to @theloneseeker for pointing it out, the new kernels are compiled with the extra lib files included inside. Install them using the same procedure above, happy dualbooting!!
yaay I'm in credits Great job man!
Paul_Kolanjian said:
Added CyanogenMod 10.2 and 11 ION kernels linux 3.4.86 dualboot from Mr. Radu's kernel collection
Added KhaN Kernel 3.4.87 [362 MB] dualboot. Big thanks to the one and only lafactorial!!
Download links:
- https://drive.google.com/file/d/0BxQMaqAowdtsOEJoeVgzMmQ1c1U/edit?usp=sharing
- https://drive.google.com/file/d/0BxQMaqAowdtsTUxhYWZPU1pUM2c/edit?usp=sharing
- https://drive.google.com/file/d/0BxQMaqAowdtsVERPVkxjNFVXaVk/edit?usp=sharing
The new kernels require lib files in addition to the boot2.img, so I included the files with them. All you have to do is put all the files together in the sub-folder of your kernel for example Dualboot/4.3.1/**put boot2.img and all other .ko files here**
Click to expand...
Click to collapse
Awesome thread and great work buddy..
nice work
thanks for this awesome work you saved me a lot of work, time & trouble
by the way I'm creating a dualboot super thread with all info about dual booting
a tutorial created by me and links to all threads about it
the ion problem was a major bummer but now we are good to go
Thanks man! :good: a question: can i use a ICS ROM as primary ROM, like it was with the dualboot by educk?
Edit: and the dualboot can affect performances/battery life?
Inviato dal mio GT-I8150 utilizzando Tapatalk
Very Important Note for 4.4.2 dualbooters
micnicmic said:
Thanks man! :good: a question: can i use a ICS ROM as primary ROM, like it was with the dualboot by educk?
Edit: and the dualboot can affect performances/battery life?
Inviato dal mio GT-I8150 utilizzando Tapatalk
Click to expand...
Click to collapse
Sure you can my friend, the primary ROM can be any Android ROM even Gingerbread, but the secondary ROM must be Jellybean and upward (tried making Gingerbread kernel dualboot compatible but it soft-bricked my phone). I repeat, this is the same procedure as educk and h0rn3t posted and all I did is add kernels to make ION kernels compatible to feed my dualboot hunger and the others as well
As for the performance and battery life, dualboot has nothing to do with it, instead, the ROM and kernel you use (on the primary and secondary partitions) are what determines the performance, e.g. if you use CM9 with hurtsky kernel on primary ROM and CM11 with stock kernel on secondary ROM, it's the same as saying you are 100% using CM9 on primary and similarly for CM11 and dualboot has no effect whatsoever on your combination, in other simplified words, dualboot for ancora by educk and h0rn3t is amazing (better than the one I have on i9100) since it creates two phones in one, so performance is based on what you are using.
***IMPORTANT NOTE*** After some testing, I realized that two custom kernels on primary and secondary Kitkat ROMs breaks the secondary ROM's WiFi and GPS, so if you are using CM11 with Khan Kernel on primary, and any other 4.4.2 ROM with hurtsky or khan kernel as well on secondary ROM for example, you will not be able to use WiFi and GPS whereas primary ROM remains unaffected, and the battery life and performance on secondary ROM are unaffected and the same as using it as primary ROM. The same happens if you use the same custom kernel on primary and secondary ROMs. So if anyone dualboots two 4.4.2 ROMs like me, use custom kernel on primary ROM and stock ROM kernel of the ROM you're using (download links are in first post). This has been tested on Android Kitkat so I don't know the consequences of two custom kernels on Jellybean. Just wanted to add this as a "Heads-up" so no one spams the threads of CM11 or any other thread accidentally. Good luck to all fellow dualbooters!!!
Will you make new cm11 kernel ready for dual boot?
Inviato dal mio GT-I8150 utilizzando Tapatalk
micnicmic said:
Will you make new cm11 kernel ready for dual boot?
Inviato dal mio GT-I8150 utilizzando Tapatalk
Click to expand...
Click to collapse
Of course I will my dear brother , all you have to do is ask and I'll supply you with a big number of kernels! I honestly stopped updating the thread since I believe that adding kernels just it would not interest users, but it's about time I release updated kernels. Feel free to post any kernel you want for any ROM, and I'll add it for you and everyone once it's done. By the time you read this post, I'll be adding new kernels in the second post, and I come with excellent news about the KitKat dualboot issue mentioned up there in the sixth post.
In order to fix the issue that persists upon dualbooting two KitKat 4.4.2 ROMs (in which using a custom kernel instead of the original ROM's kernel on the secondary ROM is breaking the secondary ROM's WiFi and GPS), the solution is quite simple. As I previously said, the primary ROM, no matter what kernel you use, is not affected. So, here it goes. Let's assume you want to install the latest CyanogenMod 11 build by Mr. Arne which was built on the 21st of May, and you decided to install the ROM on the secondary partition, but you want to install the latest HurtSky kernel with the build, yet, you know that custom kernels are breaking some essential components on the secondary ROM (In fact, this happens with any ROM other than KitKat if you use a custom kernel, and the fix works for any Android version). All you have to do is download the latest HurtSky kernel .zip file, extract the "system" file included with the kernel (there is META-INF folder, system folder, and boot.img, but we only need the system folder). Open the CyanogenMod-11.zip you want to install using WinRAR or WinZip or 7zip (basically any archiver should work), you will also see the same folders, but you need to navigate to /system/lib/modules and you will see some .so files (about 6), so delete them all. Replace these files with the .so files we extracted from the HurtSky kernel we downloaded (remember the extracted "system" folder from HurtSky's kernel) and once all the files are in place, your CM 11 ROM is ready for dualboot BUT ONLY to be used with the HurtSky custom kernel. IF you want to use another kernel, or maybe the default one, do the same steps as above and WiFi won't be affected anymore. Here is a listed summary:
1- Download the ROM.zip you want, open it and navigate to system/lib/modules.
2- Delete all the .so files found in the /system/lib/modules folder (only the files that look the same in the kernel's /system's folder)
3- Download any custom kernel you like to use in the secondary ROM, open it, and extract the "system" folder.
4- Add the .so files in the extracted 'system" folder from the kernel to your ROM.zip in /system/lib/modules.
5- You now have a dualboot-ready ROM to be used with the specific custom kernel you chose. (always make a NAndorid Backup just in case)
If anyone faces any issue or wants to have a new kernel, I am more than happy to help, give solutions, and add up some more kernels. As I said, I will be always testing dualboot to find any issues and reproduce them in order to be fixed. I always dualboot two 4.4.2 ROMs (currently on Paranoid Android by my brother Osama, and the latest CyanogenMod 11 build by Mr. Arne). Have any request? Need some help? Don't be shy to ask! Good luck to everyone!
:good: really thanks for all your work, I really appreciate this dual boot feature
Inviato dal mio GT-I8150 utilizzando Tapatalk
Hey! Will you make the new kernels ready for dualbooting? Thanks in advance!
Related
Derteufel did an amazing thing when he released his dualboot kernel for the SGS. However, you couldn't flash a ROM without some work.
My objective is to stop that. So i have made a list (with links) of roms modded to ready for dualboot. My deadline is to have roms uploaded and/or updated by every Sunday.
Let's start ;
Androslim v2.1:
Cyanogenmod 10.1 nightly 20130119:
CyanAOSP 0.5.2:
Hellybean 20120118:
Slim i9000-4.2.1.RC.1-OFFICIAL:
YOU STILL HAVE TO FLASH THE DUALBOOT KERNEL FOR THE FIRST TIME!!!
Packages (Gapps etc) are not included. Please get them from their respective ROM threads.
Thanks:
MASSIVE thanks to Derteufel1980 (make sure to say thanks to him)
All developers who's roms are posted here
Stratosk (who's kernel is in most of the roms)
Kasper_h (kernel developer)
Please press thanks if you download from any of these links and press thanks to the ROM developers.
Notes:
Guys, there's no point to this thread anymore because derteufel changed the way the kernel works so theres no need for modification. All my hard work down the drain
I am not responsible if anything happens to your phone or life!!!
Thanks for making a modded version of CyanAOSP, saved me from uploading the one I made.
Also , it is Androslim 2.1 and not Andromirror 2.1.
Andromirror is a ROM hosting site not a ROM itself
ts1506 said:
Thanks for making a modded version of CyanAOSP, saved me from uploading the one I made.
Also , it is Androslim 2.1 and not Andromirror 2.1.
Andromirror is a ROM hosting site not a ROM itself
Click to expand...
Click to collapse
Lol thanks for the correction.
No need
Bejda said:
Well I had a Mackay rom already uploaded four days ago but since then there have been newer versions..2.3.8 it is:
http://db.tt/lix0KWTR
Click to expand...
Click to collapse
I'm uploading 2.4.2
You would do better to replace the boot.img in the ROM zips with the devil dual boot one , then we wont have to reflash kernel.
BTW , you are doing one hell of a job.
Hit a snag roms will be up by Friday.
FAIL!!!
BEST ROMS
ORDERED ACCORDING TO THE SOURCE ROM/FW:
MIUI V5 4.9.26 by Helinchun
Pros:
The most updated rom
Clear and beautiful graphic
B710 Kernel
Cons:
High battery consumption
Bluetooth doesn't work
Needs testers
LINK THREAD
ENG - DIRECT DOWNLOAD
ITA - DIRECT DOWNLOAD
MOKEE OS 44.4 by xyyx 01/10/14
Pros:
All seems to work
F2FS System
A lot of customizations
UV Present
Cons:
Camera random crashes
Nothing relevantLINK THREAD
DOWNLOAD ROM
PATCH FOR EXT_SD AS PRIMARY
CM 11 M10 by Niisp 20/09/14
Pros:
xyyx Kernel
Gps and bluetooth are working
New kernel, new governors
Radio FM (see here)
SD is primary by default (you can always get the int-sd version in the downloads)
Cons:
Nothing relevantLINK THREAD
DOWNLOAD ROM (EXT AS PRIMARY)
DOWNLOAD ROM (INT AS PRIMARY)
GAPPS (select the 4.4 package you like more)
CM 11 by Spanorg 15/07/14
Pros:
Shev_T Kernel (B710 based)
Haptic feedback works (can be activated or disactivated)
Bluetooth works
GPU drivers updated
Cons:
Nothing relevant
LINK THREAD
DIRECT DOWNLOAD
DISABLE VIBRATION
SD CARD FIX (Use in case of problems with sd card)
GAPPS
LIQUID SMOOTH 3.1 by Spanorg 31/08/14
Pros:
Newest work by the famous Spanorg
It's really smooth
F2FS Support
A lot of new features from Mokee and CM11: xposed is almost useless
Bluetooth works
Cons:
Some SystemUI rebootsLINK THREAD
DOWNLOAD ROM
F2FS Recovery
DOWNLOAD GAPPS
LIQUID SMOOTH by xyyx 01/10/14
Pros:
Real fluid
Good battery optimization
A lot of new features from Mokee and CM11
Bluetooth works
Really modded: you can do almost everything you want
Cons:
Nothing relevant
LINK THREAD
DIRECT DOWNLOAD
PATCH FOR EXT_SD AS PRIMARY
OMNIROM 4.4.2 by Spanorg 26/04/14
Pros:
Haptic feedback works (by default it is activated)
Bluetooth works
Cons:
Nothing relevant LINK THREAD
DOWNLOAD ROM + SUPERSU
EXT_SD PRIMARY / INT_SD PRIMARY
SD CARD FIX (Use in case of problems with sd card) + GPS FIX + SCREEN_RECORD FIX
GAPPS
CM 10.2 by Spanorg 11/05/14
Pros:
Real fluid
Good battery optimization
Bluetooth works
B707 Kernel
13500 on AnTuTu
Cons:
Nothing relevant
LINK THREAD
DIRECT DOWNLOAD
GAPPS BY SPANORG
GAPPS BY TESTUSER0072
AP V8 by McDonald
Pros:
McD is a serious italian developer
Radio FM integrated
B709 based
Init.d support & some other tweaks
Cons:
Nothing relevant
LINK THREAD
DIRECT DOWNLOAD
MEMORY SWAP (it mixes the 2 memories)
MEMORY SWAP REVERSE
CARBON ROM by Niisp 18/07/14
Pros:
Compiled with Linaro
Bluetooth works
Cons:
Nothing relevantLINK THREAD
DOWNLOAD ROM (EXT_SD AS PRIMARY)
DOWNLOAD ROM (INT_SD AS PRIMARY)
GAPPS
MOKEE OS 42.2 by Niisp 03/12/13
Pros:
Real fluid and stable
B708 Kernel
Niisp started again developing this ROM, after a period of inactivity
Cons:
Bluetooth partially works (see this review for more details about this issue: http://forum.xda-developers.com/showpost.php?p=49224863&postcount=38)
http://4pda.ru/forum/index.php?s=&showtopic=396626&view=findpost&p=28832074 (link thread)
https://disk.yandex.com/public/?hash=arfD5PXihQt/BbiqWCcFHXoAymdkWIso66RR6gyW9YE= (with EXTSD as default)
https://disk.yandex.com/public/?hash=hH4/4ZPoyMK/F/s0qmQzC4duc4d4pIsha8lOiOrLiiw= (with INTSD as default)
CM 10.1 by Shev_T 10/02/14
Pros:
Real fluid (but *)
B709 Kernel
Compiled with Linaro -> MOOOOORE SPEED
Everything works
Cons:
*Might require some reboot
LINK THREAD
DIRECT DOWNLOAD
GAPPS (BY SHEV_T)
GAPPS (BY TESTUSER0072)
B704_ATX by Marismillas v1.2
Pros:
Real stable: in three months of use, the phone never got stucked
Based on a stock firmware
Gapps already included
Init.d support and a looooooooooot of tweaks (perfect for people like me who don't want to do anything else after flash xD)
Cons:
Not so many updates, don't know if project is definitely abandoned
In YouTube videos h/w acceleration doesn't work properly
Same thing for the other videos (but you can avoid this problem with some 3rd part apps)
http://forum.xda-developers.com/showthread.php?p=46683785#post46683785 (link thread)
http://www.4shared.com/zip/daUJt2oR/B704-marismillas12.html (direct download)
BEST STOCK FIRMWARES
ORDERED ACCORDING TO THE ANDROID VERSION:
B229 ICS - GLOBAL, NO EMUI
Pros:
The most stable firmware
Everything works
Battery consumption is real good
You can use an better uc kernel (http://www.android-hilfe.de/attachm...-image-ics-init-d-288-1600-mhz-hwuknernel.zip)
Cons:
Some apks won't work (or won't work well) because of its older Android version
You have to install it with stock recovery
https://mega.co.nz/#!Bh5BzZzK!dCEzsU_a3tO-UWdz_qsjaE-h7tZr0RIXib6f6v2g_3Y (direct download)
B130 ICS - GLOBAL, EMUI 1.0
Pros:
Everything works
More customable
You can use an better uc kernel (http://www.android-hilfe.de/attachm...-image-ics-init-d-288-1600-mhz-hwuknernel.zip)
Cons:
Battery consumption is not as good as in B229, but still acceptable
EMUI is not everyone's taste
You have to install it with stock recovery
http://zl.hwpan.com/u32513461/GROM/U9200-EM-UMTS-V100R00G403B130204D00SDV02/Upgrade.rar (direct download; sorry, no faster links)
B708 JB - CHINESE, EMUI 1.6
Pros:
The first STABLE Jelly Bean firmware
EMUI is at 1.6 version, so it is not so ugly as in the first release
You can flash an ATX version via CWM/TWRP already rooted and with gapps.
Cons:
[FOR STOCK ROM]
Gapps not included, since it is a chinese version.
You have to download a language pack enabler (http://www.android-hilfe.de/attachm...6231-firmware-b708-jb-china-all-lang-b708.zip)
[FOR ATX ROM]
No real bugs atm, still testing
https://mega.co.nz/#!Wo4i0ShQ!ahoQ53MWp2ntLyxRKAvlWXHtsexew7kcvldw2kwRDvM (direct download)
http://goo.im/gapps/gapps-jb-20121011-signed.zip (gapps)
http://goo.im/devs/ibotpeaches/miuiandroid/releases/gapps/miuiandroid_gapps-4.1.2-small_signed.zip (gapps mini)
http://www.htcmania.com/showthread.php?t=749828 (link ATX thread)
https://mega.co.nz/#!hJwDVLIB!WyvCmF3YuXSt5O62Ay9QMnrXAY8l6s_imlSrEmk8kjs (ATX version for who come from an EMUI stock firmware)
https://mega.co.nz/#!tQ4UyCzZ!B0uzeFuZEUB6a8TGb6-cyxHBMVNs0x_UM7yuxByQE9c (ATX version for who come from other ROMs)
B709 JB - CHINESE, EMUI 1.6
Pros:
The same of B708 with some little fixes more
New baseband
Cons:
[FOR STOCK ROM]
Gapps not included, since it is a chinese version.
You have to download a language pack enabler (https://mega.co.nz/#!CgIBGJDS!SfrawzQszc74Z0TcNgORaDf95Udt-ch3us8F8x2PcDw)
[FOR ATX ROM]
Flashing it via custom recovery you won't upgrade the bb
No real bugs atm, still testing
https://mega.co.nz/#!DlohxJKZ!DDAQ529yE3oSL-ZA5FTxYAOuG_gOK_utTpahHJBDqTg (direct download)
http://goo.im/gapps/gapps-jb-20121011-signed.zip (gapps)
http://goo.im/devs/ibotpeaches/miuiandroid/releases/gapps/miuiandroid_gapps-4.1.2-small_signed.zip (gapps mini)
http://www.htcmania.com/showthread.php?t=766343 (link ATX thread)
https://mega.co.nz/#!UZwigRZa!FyRgLSz4_bBVrZsXhFc5Jz08aUFEX7wEfCyOpPoJ5Xw (ATX version for who come from an EMUI stock firmware)
https://mega.co.nz/#!gA4SkYLK!atEKrQHRhAVitk_dPQRLaXogtRkBX-w3O0mJl1oj-oM (ATX version for who come from other ROMs)
OTHER DOWNLOADS
USEFUL FOR EVERY ROM/FW YOU HAVE
EMUI CAM (definitely better)
All-In-One Tool
Gapps (there is a huge choice of modular, stock, micro, full,... for every android version)
SuperSU 1.80
U9200 Downloads by o-l-a-v
U9200 Downloads by Alobalobayeah (ITA) (Please read! It's not a copy of olav work, it's a mine personal, and different, work )
Bravia Engine*
* To make it work insert these strings in build.prop
ro.service.swiqi.supported = true
persist.service.swiqi.enable = 1
HAAAALP
SOME ADVICES FOR THE NEWBIEST
HOW TO FLASH A CUSTOM ROM
Do a backup of your apps (you can use Titanium Backup, Helium Backup, App2Zip,... obviously you need root; if you came from a stock firmware: either you root it, or you can use Huawei Backup, but don't forget to find also a way to backup this app or to download it in order to restore your apps after the flash)
Do a Nandroid Backup, ie a full backup with CWM/TWRP. To flash or emulate a custom recovery, if you don't know how to do it, you can use my tool (useful also for other stuff)
Wipe cache, dalvik and data (sometimes you need to wipe /system too)
Install zip from sdcard... (in twrp just "Install") > Select the rom
Reboot
PS: if you are UPGRADING to the newest version from the same rom (ex. MK 44.2 09/03 -> MK 44.2 02/04) you don't have to wipe neither data nor system, unless the same chef suggest to do it
HOW TO FLASH A STOCK ICS/JB FIRMWARE
Do a backup of your apps (you can use Titanium Backup, Helium Backup, App2Zip,... obviously you need root; if you came from a stock firmware: either you root it, or you can use Huawei Backup)
If you have flashed a custom recovery, go back to the stock recovery, or it won't work. If you don't know how to go back, you can use my tool (useful also for other stuff)
Download the intermediate pack
Create a folder in your sd and rename it "dload"
Copy the intermediate pack's update.app in dload
Create another folder in your sd and rename it "dloadold"
Download the stock firmware and place update.app in dloadold
Be sure that you have more than 85% of battery
Turn off the phone and reboot it pressing - and holding - vol+, vol- and power
The recovery will do the rest. At the end you will have the intermediate fw.
Now open the default file manager: delete dload and rename dloadold in dload.
Repeat the step 9.
PAY ATTENTION: If you download the JB Chinese version, remember that it's in chinese language! Anyway, you can flash with custom recovery a language enabler pack (download it here)
Code:
What's new:
[05/10/14]
[B]MAJOR UPDATE
Almost all roms updated
Fixed some dead links
Deleted abandoned roms[/B]
[05/07/14]
Updated MIUI V5 to version 4.7.4
Updated CM 11 to version 22/06/14
Updated LS 3.1 (by Spanorg) to version 04/07/14
Added LS 3.1 (by xyyx)
Added MK 44.4 by xyyx
Obscured link for MOKEE OS by Niisp, thread not found (don't know why)
[13/06/14]
Updated MIUI V5 to version 4.6.13
Updated CM11 by Niisp
Updated MK44.2 by Niisp
Updated LiquidSmooth 3.1 by Spanorg
[28/05/14]
Updated MIUI V5 to version 4.5.23
Updated MOKEE 44.2 to version 27/05 -> NEW KERNEL, NEW GOVERNORS, NEW SCHEDULERS
Updated CM 11 by NIisp to version 26/05 -> NEW KERNEL, NEW GOVERNORS, NEW SCHEDULERS
Updated CM 11 by Spanorg to version 16/05 -> Mooooore stability
Updated LIQUID SMOOTH by Spanorg to version 21/05
Updated AP to V8
[11/05/14]
Added LIQUID SMOOTH KK 3.0 by Spanorg
Added CARBON ROM by Niisp
Added RESURRECTION REMIX by Niisp
Updated MIUI V5 to 4.5.9 version
Updated MK 44.2 to 09/05 version
Updated CM 11 by Niisp to 10/05 version
Inserted BT FIX in CM11 by Spanorg
Inserted SCREEN_RECORD FIX in OMNIROM by Spanorg
[04/05/14]
Updated MIUI V5 to 4.4.25 version
Updated CM 11 by Niisp to 02/05 version
Updated OMNIROM by Spanorg to 26/04 version
[24/04/14]
Updated MK 44.2 to 22/04 version
Updated CM 11 by Niisp to 21/04 version
[18/04/14]
Updated MIUI to 4.4.18
Updated MK 44.2 to 13/04 version
Updated CM 11 by Niisp to 11/04 version
[09/04/14]
Updated MIUI V5 by Helinchun to 4.4.4 version
Updated CM 11 by Niisp to 05/04 version
Updated CM 11 by Spanorg to 02/04 version
Updated OMNIROM by Spanorg to 08/04 version
[02/04/14]
Updated MOKEE 44.2 to the 02/04/14 version, NOW BLUETOOTH WORKS :D
Added haaaalp section
[01/04/14]
Updated MIUI V5 to 4.3.28
[19/03/14]
Updated MOKEE 44.2, now radio fm works
Updated gapps by TestUser0072 for CM 10.1 and CM 10.2
[17/03/14]
Updated MIUI V5 to 4.3.15
Updated OMNIROM to 08/03/14
[08/03/14]
Updated MIUI V5 to 4.3.7
Updated MOKEE 44.2 -> A lot of news :D
Updated CM 11 by Niisp
[01/03/14]
A little restyling of the thread
Updated OmniROM to 27/02/14 version
Updated CM 11 by Spanorg to 01/03/14 version
Updated CM 11 by Niisp to 25/02/14 version
Updated MK 44.2 by Niisp to 01/03/14 version
Deleted CM 11 by ATX: there are better kk roms
[26/02/14]
Added OmniROM by Spanorg
Updated AP to version 7.7
[23/02/14]
Updated MIUI to version 4.2.21
Added two new roms: MK44.2 & CM11 by Niisp
[20/02/14]
Updated MIUI to version 4.2.14
Updated CM11 by Spanorg to 4.4.2 version
A little correction in B709 ROM -> "Cons: If you install the ATX version you won't upgrade the baseband"
[13/02/14]
Updated CM10.1 to version of 10/02/14 -> Now compiled with Linaro :D
Added a new CM11 ROM :D All seems to work
[09/02/14]
Updated MIUI to version 4.2.7
Updated CM10.1 to 05/02/14 version
Updated CM10.1 and CM10.2 with newer gapps by testuser0072
[29/01/14]
Added new rom!:D PACMAN by Niisp -> Needs testers
Added B709 & B709_ATX
Updated MIUI to version 4.1.25
Updated MOKEE OS thread's link
[22/01/14]
Now direct links are more... direct xD
Updated MIUI to the 4.1.17 version.
Updated gapps by TestUser0072 for CM 10.1 and 10.2
Updated AP to version 7.6, a lot of news :D
[13/01/14]
Updated MIUI to the 4.1.10 version.
Updated AP to version 7.5.4. Now all bugs are fixed!!! :D
Updated CM 10.2 and CM 10.1 Gapps by Testuser0072
Updated CM 10.2 title to the 18/12 build (I have totally forgotten, sorry; but download link was already updated).
Thanks to: @testuser0072 for gapps; @o-l-a-v for some download links; @aaaa00 for his contributes here and on his page, @MatVekk, and @iker_92, for giving me a help with this thread; all the people who help me in this thread writing updates and tips in comments; all the developers of this fantastic phone
[ROM] AP_V5 by Mcdonald
Reformulated rom, purged of most of Huawei and with very little customization.
Base B315/534
The rom has stock toggles, brand new bootanimation, e-mail and generic Huawei.
Free ram always above the 400 mb,
very fast and slightly modified kernel.
Charging Animation works.
Rom_V3: http://dh.st/HmK
Add on: http://dh.st/I5U
Update_V5: http://dh.st/8PZ
Full wipe, flash V3, addons, and start the phone, configure and after flash v5_update.
Important as always you first set up the apn.
[ROM] AP v7 by Mcdonald
http://www.androidiani.com/forum/modding-huawei-ascend-p1/336483-rom-ap_7-5-a-13.html#post4780016
Finally, I was hoping there is a thread like this for Ascend p1 in xda. And now I found it :victory:
I have read in another forum that CM 10.1 by faust and maxrink are the most stable and all fully working.
I'm downloading CM 10.1 by faust right now.
By the way, here is another stable ROM and most fully working for daily use:
MOKEE OS:
ext SD as default:
https://disk.yandex.com/public/?hash=K/0EtgwZD9PK8zgfhrFF4ZHr%2BomImPAb3g9KnjcGf5c%3D&locale=ru
int SD as default:
https://disk.yandex.com/public/?hash=SBoS78Rfg7P/IN02xCcIznRvNQm8RuWPcy5In1ylKU4%3D&locale=ru
davidben73 said:
Finally, I was hoping there is a thread like this for Ascend p1 in xda. And now I found it :victory:
I have read in another forum that CM 10.1 by faust and maxrink are the most stable and all fully working.
I'm downloading CM 10.1 by faust right now.
By the way, here is another stable ROM and most fully working for daily use:
MOKEE OS:
ext SD as default:
https://disk.yandex.com/public/?hash=K/0EtgwZD9PK8zgfhrFF4ZHr+omImPAb3g9KnjcGf5c=&locale=ru
int SD as default:
https://disk.yandex.com/public/?hash=SBoS78Rfg7P/IN02xCcIznRvNQm8RuWPcy5In1ylKU4=&locale=ru
Click to expand...
Click to collapse
Very good!! can you link me the original thread where they talk about this ROM please? (It is from 4pda right?)
Inviato dal mio U9200 utilizzando Tapatalk
OP updated with new roms and a new clear graphic
Alobalobayeah said:
Very good!! can you link me the original thread where they talk about this ROM please? (It is from 4pda right?)
Inviato dal mio U9200 utilizzando Tapatalk
Click to expand...
Click to collapse
of course friend.
here's the original link http://4pda.ru/forum/index.php?showtopic=441214&st=1320#entry26163783
tribute to niisp (4pda)
which rom the most stable one? stock or custom doesnt matter
AP 7.5 > the addon pach (7.5.2) had been updated and is missing in the spoiler
Mokee Updated!:
MK42.2.RC5-EXT-viva-20131203-UNOFFICIAL
MK42.2.RC5-INT-viva-20131202-UNOFFICIAL
There is a MOKEE 4.3 [/B]too, works but same problems of CM1.2
PACman - PAranoid + Aokp + CM (working ones only, tested by me)
- FAUST93 for V22.1 (02may13) : http://goo.im/devs/faust93/pacman/viva_PAC_JB_4.2.2-v22.1.0_20130502-210004.zip
- MAXRINK for v23 (07sep13): pac_viva_4.2-_20130907-185950.zip (146.7 MB)
Beanstalk 1.300 by niiisp (http://4pda.ru/forum/index.php?showtopic=441214&st=800) untested by me
:good:
ps: alobalobayeah you can use INDENT | -> to create grey 'boxes'
aaaa00 said:
AP 7.5 > the addon pach (7.5.2) had been updated and is missing in the spoiler
Mokee Updated!:
MK42.2.RC5-EXT-viva-20131203-UNOFFICIAL
MK42.2.RC5-INT-viva-20131202-UNOFFICIAL
There is a MOKEE 4.3 [/B]too, works but same problems of CM1.2
PACman - PAranoid + Aokp + CM (working ones only, tested by me)
- FAUST93 for V22.1 (02may13) : http://goo.im/devs/faust93/pacman/viva_PAC_JB_4.2.2-v22.1.0_20130502-210004.zip
- MAXRINK for v23 (07sep13): pac_viva_4.2-_20130907-185950.zip (146.7 MB)
Beanstalk 1.300 by niiisp (http://4pda.ru/forum/index.php?showtopic=441214&st=800) untested by me
:good:
ps: alobalobayeah you can use INDENT | -> to create grey 'boxes'
Click to expand...
Click to collapse
Thanks ! Merci ! Danke ! Gracias !
Sent from my Nexus 7 using XDA Premium 4 mobile app
aaaa00 said:
AP 7.5 > the addon pach (7.5.2) had been updated and is missing in the spoiler
Mokee Updated!:
MK42.2.RC5-EXT-viva-20131203-UNOFFICIAL
MK42.2.RC5-INT-viva-20131202-UNOFFICIAL
There is a MOKEE 4.3 [/B]too, works but same problems of CM1.2
PACman - PAranoid + Aokp + CM (working ones only, tested by me)
- FAUST93 for V22.1 (02may13) : http://goo.im/devs/faust93/pacman/viva_PAC_JB_4.2.2-v22.1.0_20130502-210004.zip
- MAXRINK for v23 (07sep13): pac_viva_4.2-_20130907-185950.zip (146.7 MB)
Beanstalk 1.300 by niiisp (http://4pda.ru/forum/index.php?showtopic=441214&st=800) untested by me
:good:
ps: alobalobayeah you can use INDENT | -> to create grey 'boxes'
Click to expand...
Click to collapse
Updated!
PS: what do you mean with gray boxes (I'm saying: to do what? xD)
To highlight text, under the title for example.. I've just discovered this function.
PS: the AP v5?
there is also a Marismillas b534 with additional governor and features (if someone remove the emui gUi & apps.. it will be ok!)
aaaa00 said:
To highlight text, under the title for example.. I've just discovered this function.
PS: the AP v5?
there is also a Marismillas b534 with additional governor and features (if someone remove the emui gUi & apps.. it will be ok!)
Click to expand...
Click to collapse
Aaaaaah ok, if there will be an occasion to use it I'll do 4 ex I was thinking to add pros and cons of every ROM and l could put them in these grey boxes.. besides it, when I have more time I'll add marismillas one (are you sure it works well? I didn't tried it: if you know that it is a good ROM without important bugs I'll add it in the next edit Remember that thread's title is "All the GOOD-WORKING ROMs for p1")
Oh, why have I to put AP5? Isn't AP7.5 better? (I don't know, I'm asking )
Inviato dal mio U9200 utilizzando Tapatalk
OP updated, added new MIUI, the 3.12.6 and updated gapps of CM10.2
Will be great if you write after every ROM, the date when you updated it lastly.
This is just advice, because for example, everyone see when you change the first post, but no one knows wich ROM and link to it, you update
bmasgone said:
Will be great if you write after every ROM, the date when you updated it lastly.
This is just advice, because for example, everyone see when you change the first post, but no one knows wich ROM and link to it, you update
Click to expand...
Click to collapse
Thank you for your advice when I'll have more time so I'll insert a kinda changelog
Inviato dal mio U9200 utilizzando Tapatalk
I suggest you to flash the AP 7.5.3 !
the best choose for radio-FM lovers and Android Pure fun. It is very smooth and stable. I use it from 3 months and works very well (70+ user apps). Kernel b705 will be updated to 707 in January to solve HUAWEI video forwarding bug (and probably increase battery performance).
Emui was been suppressed, you find the Classic firmware-based Ui.
Battery life more improved, very very good work.
(Looking at next major update with b707)
AP v7 is the way.
Happy Christmas
aaaa00 said:
I suggest you to flash the AP 7.5.3 !
the best choose for radio-FM lovers and Android Pure fun. It is very smooth and stable. I use it from 3 months and works very well (70+ user apps). Kernel b705 will be updated to 707 in January to solve HUAWEI video forwarding bug (and probably increase battery performance).
Emui was been suppressed, you find the Classic firmware-based Ui.
Battery life more improved, very very good work.
(Looking at next major update with b707)
AP v7 is the way.
Happy Christmas
Click to expand...
Click to collapse
Sorry but I did actually flashed the CM10.2 today aaand, it feels good If I change idea, I'll probably install AP 7.5.3
Anyway, Merry Christmas to you too
agritux said:
which rom the most stable one? stock or custom doesnt matter
Click to expand...
Click to collapse
All these roms are really stable... Often it's a personal "taste".
According to me, I prefer B704_ATX, CM10.2 and AP7.5.3
I remember that bt not works properly in slimbean and CM10.2/CM11 based roms.. Are you sure that these are working fully ?
> Slimbean project has been abandoned < :'(
aaaa00 said:
I remember that bt not works properly in slimbean and CM10.2/CM11 based roms.. Are you sure that these are working fully ?
> Slimbean project has been abandoned < :'(
Click to expand...
Click to collapse
In the last version Spanorg fixed a lot of issues related to Bluetooth.. Regarding CM11, yes it is true that Bluetooth doesn't work, but for the rest it is really stable so why not insert it in this guide? And yes, Slimbean is stopped at the v7 but almost it is pretty fluid
Inviato dal mio U9200 utilizzando Tapatalk
I have been sharing my CM7/CM9/CM10/CM10.1/CM10.2-based builds for some time in several thread, which culminated in the MackayROM. I continue now with KK4.4 from where I was for JB4.3. MackayROM is based on CyanogenMod sources, with several performance enhancements.
About Cyanogen: CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Disclaimer: I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
If you run into errors, I may not be able to solve it!
If you know a solution to a problem, either upload it yourself to Gerrit Code Review or contact me through pm.
The ROM is based on Cyanogen sources with the following changes:
-Mackay Kernel:
-Set of cherries picked from gerrit (differing by the day)
-Some additional patches I did myself to the source code
Feature request are OK, but remember:
1. I try to stay close to stock
2. I will not include additional apps, unless they can be build from source
3. The time I spend on features depends on how much I like them myself
Although it is possible to enable ART, this is not advisable:
-Takes long to convert from Dalvik to ART on first boot
-Needs more RAM
-Can cause soft reboots
But off course, YMMV -> light users may have better luck
Changelog of 4.9.14 - 5-Nov-2014
-CM11.0 codebase of 3-Nov-2014
-TWRP updated to 2.8.1.0
Full changelog of 4.9.14 compared to stock CM11.0:
CM11.0 sources of 3-Nov-2014
Mackay kernel:
Separate kernel thread: http://forum.xda-developers.com/showthread.php?t=2532813
TWRP (2.8.1.0):
-Themed orange
-Run recovery-apps (zip files should be present in /system/mackay, launch them through advanced->run app)
Removed apps:
-VideoEditor & demo VideoFiles
vendor/cm:
-Adapt for custom MackayROM building (bootanimation, ROM&file name)
-Custom bootanimation (Thanks to Malcho)
vendor/samsung:
-Added scripts for Mackay Settings
hardware/samsung:
-F4k 720p patch for bigmem kernels
AriesParts (“Mackay Settings” in Settings menu):
Add mackay kernel settings options:
>WiFi PM mode selection
>BLX settings
>BLN activation
>Navbar selection
>Low RAM mode selection
For other projects (frameworks/base & Settings, check my github for the latest patches)
Coming from stock Samsung ROM/CM7:
-The safest way is to flash CM9 first and then flash Mackay ROM. Going directly from Samsung ROM/CM7 to Mackay ROM may lead to loosing IMEI.
Fresh install:
Can be flashed on top of any CyanogenMod build:
-Do a factory reset
-Flash ROM
-Flash gapps
-Reboot your phone
Update:
-Flash ROM
-Reboot your phone
(no wipes or other things needed, just flash & reboot)
-Custom kernels can be used only if specific for KK4.4
Credits:
-teamhacksung/pawitp for making CyanogenMod work on our ancient phone
-stratosk/DerTeufel/Mialwe for the inspiration I got from their kernels
-rootax for providing a high-speed server for high quality downloads
-Malcho for his kernel splash & bootanimation
Downloads:
Basketbuild
Google Apps
Nano Gapps
For those who want to theme it even further, Bejda made a Mackay splash screen!
http://forum.xda-developers.com/showthread.php?t=2214468
To download the same kernel, but then with voodoo colour, or with CWM:
Basketbuild
XDA:DevDB Information
[KK 4.4.4][ROM]Mackay ROM, ROM for the Samsung Galaxy S I9000
Contributors
kasper_h
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2013-11-16
Last Updated 2014-09-21
Reserved
10 seconds after posting this thread I notice something went wrong with the uploads. Please have a bit of patience, the links will be updated ASAP.
kasper_h said:
10 seconds after posting this thread I notice something went wrong with the uploads. Please have a bit of patience, the links will be updated ASAP.
Click to expand...
Click to collapse
Ok, Thansk for the rom. I will instal today. In it there is CWM or TWRP?
marcinowozniako said:
Ok, Thansk for the rom. I will instal today. In it there is CWM or TWRP?
Click to expand...
Click to collapse
Kernel is TWRP-only at the moment.
Download link on XDA fileserver has been restored. Download link on rootaxbox will take quite a bit more time, needs a full re-upload & uploadspeed is very slow ATM.
Oh.
When will Galaxy Vibrant get this, same device, but still, no 4.4 ROM
Good job
Galaxy3HELL said:
When will Galaxy Vibrant get this, same device, but still, no 4.4 ROM
Good job
Click to expand...
Click to collapse
I think this will come soon, but I won't work on that
kasper, you compiled cm11 by yourself or you got the sources from cm, because there is no cm11 build in get.cm site yet
limnaln said:
kasper, you compiled cm11 by yourself or you got the sources from cm, because there is no cm11 build in get.cm site yet
Click to expand...
Click to collapse
I always build these ROMs myself from CM sources + my own additions to CM sources, so no need for "official" CM11 builds to enable my own ROMs to be build.
kasper_h said:
I think this will come soon, but I won't work on that
Click to expand...
Click to collapse
Can I install your kernel on CM11?
marcinowozniako said:
Can I install your kernel on CM11?
Click to expand...
Click to collapse
I have no separetely flashable kernel yet...
this is awesome... was waiting for this.... one quick question though... can we use officail paranoid android gapps with this rom?
rajeshbabushrestha said:
this is awesome... was waiting for this.... one quick question though... can we use officail paranoid android gapps with this rom?
Click to expand...
Click to collapse
Yes, in principle every gapps KK4.4 package should work. However, I only tested the package which I linked in OP.
thank you for this:good:
kasper_h said:
Yes, in principle every gapps KK4.4 package should work. However, I only tested the package which I linked in OP.
Click to expand...
Click to collapse
Thanks for KK rom :good: :good:
OP's link to Gapps contains five different builds- some with ART compatibility. Is there a preferred one? ART works/tested, or better stick to delvik for a little while?
A few things I noticed:
- If I select Performance settings from Mackay app, Settings force closes.
- Orientation tile is buggy, sometimes it seems to work, sometimes not.
The ROM is very snappy, thank you very much for your work!
Kasper_h installed this rom and I have a bug. When I want to enable high-speed data connections settings crashes me the error: com.android.systemui and closing forces. Framework to overloads.
Thanks for the rom, There isnt any bug list?
Installed on CM11 and works fine.No forced closure and fast enough to be a test.
so no separate kernel 0.600
Hello Everyone!!
So here is a new ROM I compiled yesterday, it does have a lot of features and it is called SONIC OPEN KANG PROJECT
I didn't open a new thread for it because I'm not gonna be updating it unless many users encourage me to do so...
Anyway I thought I should share it with you guys, for who ever wanna test it
Here is this ROM's features:
http://sonic-developers.com/?page_id=160
Also here is a quick review for the ROM:
And for more info visit their website:
http://sonic-developers.com
Download Link:
I've started uploading my files to androidfilehost.com , hoping you like it more than Dev-host
SOKP-MS-04-KK444-KTU84Q-20140726-amami.zip
Here are my screenhots as well:
Hello Guys,
Since our lovely Z1C is relatively new, it doesn't have many CM based ROMs, so I thought why not porting some
from the closest phone to ours (which is obviously Xperia Z1).
So I'll be presenting five ports for five ROMs as mentioned in the title, but I'm gonna start with a simple guide for how to port the ROM yourselves
All you have to do to port a CM11 based ROM from Z1 is:
Download the Z1 ROM and extract it wherever you want
Open META-INF\com\google\android\updater-script with any text editor and remove first five lines (assert)
Download This for old builds, and This for new builds, then unzip it
Copy and replace "boot.img" from the previous zip to your Z1 ROM
Copy and replace "modules" folder to system\lib\modules in your Z1 ROM
Open system/build.prop with any text editor and change this value:
Code:
# Graphics
ro.sf.lcd_density=480
to become:
Code:
# Graphics
ro.sf.lcd_density=320
that is it, although there are optional things you may do before compressing the ported ROM:
In system/build.prop search for honami and replace them with amami
And then search for C6903 and replace them with D5503
Also you may wonna add "Compact" here:
ro.product.model=Xperia Z1 Compact
Click to expand...
Click to collapse
You may also open META-INF\com\android\metadata and do the same replaces
Resign the ROM.zip after compressing it
Important Notes:
DO THIS ON YOUR OWN RISK
You must be running KK ROM before flashing these ROMs down below
This method won't work on Slimkat, although you can grab it from Here
All bugs in these ROMs are related to the original ROM not issues caused by posting
Fell free to report any bugs you face though, and I'll enlist them in known issues
PacMan ROM and MoKee ROM are officially supported, so there is no need to port them
Instructions for all ROMs down below:
Copy the zip to your device
Reboot into recovery
Backup of your system (optional)
Do a factory reset and format [/system]
Flash the Zip
XenonHD & BeanStalk
:::The XenonHD ROM:::
This was built in (2014-04-02) [Build 5]
It contains CM11 FXP312 Kernel
Zip is resigned
Screenshots:
Download link:
update-XenonHD-04-02-14-signed-amami.zip - 238.44 MB
New build's port can be found here: (Not tested by me)
http://forum.xda-developers.com/showthread.php?p=53365536
For more info and screenshots, visit the Original Thread
:::The BeanStalk ROM:::
This was built in (2014-03-11) [Build 3]
It contains It contains CM11 FXP312 Kernel
It has random reboot bug
Zip is resigned
Screenshots:
Download link:
BeanStalk-4.4.255-20140311-amami.zip - 251.39 MB
For more info and screenshots, visit the Original Thread
:::Gapps:::
GApps Standard 4.4.2 (10/5)
Removes AOSP Camera and AOSP Gallery and Replaces it with the Google variants
Removes AOSP Launcher2/Launcher 3 and CM Trebuchet and Replaces it with Google Now Launcher
Adds Google Search aka Google Now
All necessary syncing apks and libs
GApps Minimal 4.4.2 (10/5)
~20 MB
Playstore
Syncing apks and libs, etc.
Google Camera 4.4.2 (16/1)
Automatically removes AOSP Camera/Gallery and adds Google Camera/Gallery
FaceLock 4.4.2 (10/5)
Adds Face unlock
GenieWidget 4.4.2 (10/5)
Adds stock news and weather widget
AOSP Calendar Sync 4.4.2 (16/1)
Adds syncing ability for AOSP Calendar (not in Core or Standard packages)
AOSP Browser Sync 4.4.2 (16/1)
Adds syncing ability for AOSP Browser (not in Core or Standard packages)
This was copied and pasted from Original Thread (you can find more Gapps mirrors here)
Personally I prefer [and have tested] the minimal Gapps package, it is the best
Great work!
I wonder if you would do Slimrom also, it is a mainstream ROM with many innovations that other ROMs have copied.
[edit] Duh I just read your comment about slimkat. That'll learn me to read OPs properly...
wow, this looks good, i think ill try MoKee, just one question, is everything working ?
Just flash rom and some gapps ?
juried said:
Great work!
I wonder if you would do Slimrom also, it is a mainstream ROM with many innovations that other ROMs have copied.
[edit] Duh I just read your comment about slimkat. That'll learn me to read OPs properly...
Click to expand...
Click to collapse
actually, just today; @akshaybz has opened a thread for slimkat (not ported, compiled) here:
[ROM][4.4.2][KOT49H] SlimKat - Amami [Build 4][Alpha][UNOFFICIAL]
Enjoy
xhizors said:
wow, this looks good, i think ill try MoKee, just one question, is everything working ?
Just flash rom and some gapps ?
Click to expand...
Click to collapse
Well I didn't test everything, but the ROM was flawless, wifi is OK
Yes just flash rom and some gapps, try it and give a nice feedback
Might be a dumb question, but will updating them through the rom settings mess anything up?
RevokOne said:
Might be a dumb question, but will updating them through the rom settings mess anything up?
Click to expand...
Click to collapse
I don't expect updates to appear in the ROM's settings, but if they do,
yes updating that way should mess up a lot, it should make a bootloop.
anyway if you see an update for the ROM you're using, just tell me and I'll port the new release right away
omarainea said:
I don't expect updates to appear in the ROM's settings, but if they do,
yes updating that way should mess up a lot, it should make a bootloop.
anyway if you see an update for the ROM you're using, just tell me and I'll port the new release right away
Click to expand...
Click to collapse
I been building ROMs on linux trying and testing build from source..Im new to it and the device has been a long time HTC user. So guess all are from Z1 with afew changes you posted similar to the stock port way. I built a few roms so apart from the one I'm supporting. Carbon and PAC ROM has shown
Sent from my Xperia Z1 Compact using Tapatalk
Thread Updated
Ported MoKee 2014-03-31 Release
Ported Carbon 2014-04-01 (Build 2)
Also updated kernel in OP and in these two builds to 3.4.0 CM11 gb37510f From FXP313
I think I'll be updating the thread every week from now on, until these ROMs get a compiled version
Enjoy
How are the cameras qualities on these roms?
---
Sendt fra LG G Pad
slonn said:
How are the cameras qualities on these roms?
---
Sendt fra LG G Pad
Click to expand...
Click to collapse
Exactly like in CM11.0
omarainea said:
Exactly like in CM11.0
Click to expand...
Click to collapse
And how exactly is the quality in CM11, I can't seem to find a definitive answer in either CM thread?
Any updates on the roms btw?
Cheers! :good:
Thread Updated
e2zippo said:
And how exactly is the quality in CM11, I can't seem to find a definitive answer in either CM thread?
Click to expand...
Click to collapse
I don't know how to describe its quality, I think the best way to know is by trying
e2zippo said:
Any updates on the roms btw?
Click to expand...
Click to collapse
Yeah it's been a week, so here are the Updates of this week:
Updated Carbon ROM to build 4 (2014-04-09)
Updated MoKee ROM to build 2014-04-04 (its kernel was updated to FXP314)
Added XenonHD ROM latest release build 5 [2014-04-02] (download link in second post)
it is very customizable (can't describe it enough)
you can check more info about it in its main thread
about the kernel update, it seems like FXP team have messed up thier kernel a little
so when I tried it on Carbon and XenonHD I got some sort of bootloop,
but it worked fine on MoKee, so MoKee is the only ROM that has FXP314 kernel,
I don't recommended anyone to use it for porting so I didn't upload it
omarainea said:
about the kernel update, it seems like FXP team have messed up thier kernel a little
so when I tried it on Carbon and XenonHD I got some sort of bootloop,
but it worked fine on MoKee, so MoKee is the only ROM that has FXP314 kernel,
I don't recommended anyone to use it for porting so I didn't upload it
Click to expand...
Click to collapse
Actually the problem is not much with the latest kernel, but rather with the ROMs:
Recently there was a huge changeset merged in CM tree, among other things it took in kernel a lot of CAF code\blobs from 4.4 Sony sources, and Xperia CM ROM was rebased on this CAF kernel.
It means, that the ROMs based on CM must be rebuild using latest sources, otherwise they'll have a bootloop with the new CAF kernel =)
TheQwertiest said:
Actually the problem is not much with the latest kernel, but rather with the ROMs:
Recently there was a huge changeset merged in CM tree, among other things it took in kernel a lot of CAF code\blobs from 4.4 Sony sources, and Xperia CM ROM was rebased on this CAF kernel.
It means, that the ROMs based on CM must be rebuild using latest sources, otherwise they'll have a bootloop with the new CAF kernel =)
Click to expand...
Click to collapse
Huh, Thanks for the info bro,
seems like I should read more very now and then to know this kind of stuff.
Thread Updated
Added Paranoid Android ROM
This was built in (2014-04-15)
It contains CM11 20140410-Nightly kernel
Updated MoKee ROM
This was built in (2014-04-14)
The ROM was deodexed (original ROM was odexed)
It contains CM11 20140410-Nightly kernel
hi, should i have a unlock bootloader for test this roms? i can´t unlock it
canteo said:
hi, should i have a unlock bootloader for test this roms? i can´t unlock it
Click to expand...
Click to collapse
unfortunately yes, if you want to flash a custom kernel, you have to have an unlocked bootloader (and that is required to flash custom ROM)
UPDATE: I really no longer have the time to update the custom kernels, I now work 16 hours days, 5-6 days weekly. With travelling time added, I barely have time to sleep.
Battery optimization is about choosing the right rom, tuning cpu governor interactive, disabling Google Play Services (use microG & tune GCM), forcing doze immediately, disabling ads, using black/white screen, app optimization (disable analytics, instant messaging), plus many other things.
Identify the rom, the base (aosp or lineage), can choose to use any of the kernels below if it is based on the same base. A backup of your original rom's kernel is in the rom.zip file, simply extract it and restore if encounter any problems.
I have created a guide here
(Please don't quote the original 1st post when replying, as everything is in progress, not written yet,
Please don't ask for ETAs, I'm only doing this in my limited spare time, thank you)
My kernels are NOT flash-and-forget, please READ through post #1, then CONFIGURE using Kernel Adiutor Mod (see post #2)
[Z00L][KERNEL]Enhancements For Increased Battery Backup v1 the original thread (now locked/closed)
DISCLAIMER
I bear no responsibility towards any malfunction of your device. Use my kernels at your own risk.
BACKUP YOUR PARTITIONS!!!
Before attempting to flash any kernel/rom, backup your critical partitions! It's meaningless to ask for help when disaster strikes. Follow the links below, root is required.
Partition Dump - Complete STEP 1
Partition Backup by wanam (save as both .img & tar.gz, plus the 1st 100MB - see 'spanner tool')
There's no need to backup the System or Data partition.
Credits & Thanks
abhishekr700 | source
Fabb2303 | source
LuK1337 | source
prakharluv | source
For Z00L & variants only, meaning these kernels are for Asus Zenfone 2 Laser models
- ZE550KL
- ZD550KL
- ZE600KL
Change Log (nothing new)
v05
added cpu hotplug: autosmp
v04
added USB Fast Charge, credits to @ENGstk
v03
removed CRC Check for 30% Performance Boost
v02
added SeLinux: Set to permissive
v01
added tcp-algorithm: westwood (default), bic, htcp, hstcp, hybla, vegas, scalable, lp, veno, yeah, illinois
added memory: samepage merging, frontswap, cleancache
added filesystem: ntfs
added config: kernel config.gz can be found at /proc
removed hotplug: msm performance
removed cpu: touch boost
v00
same as stock boot.img from rom
DOWNLOAD
Unzip, copy to phone, then flash kernel via TWRP (select BOOT partition), re-flash SuperSU if you use it, reboot directly.
(Note: if you need to revert to original kernel, either use :
v00 of my kernel - its the same as your stock rom boot.img,
or extract boot.img from the rom)
If you use Magisk, refer to this thread 1st post - Installation Instructions, section "If you're not rooted, or something went wrong and you need a clean start"
Marshmallow
Lineage OS 13, latest is v05 for ROM lineage-13.0-20170226-UNOFFICIAL-Z00L.zip
Kernel Source
Nougat
AOSP-based Slim7 Nougat, latest is v05 for ROM Slim-Z00L-7.1.1.build.0.13-UNOFFICIAL-20170227-1643.zip
Kernel Source
Note: Rom's dev recommend Slim7 as the best battery backup ROM (AOSP-based) under his care
AOSP-based Tesla Nougat, latest is v05 for ROM Tesla-Z00L-7.1.1.Beta.v3.6-UNOFFICIAL-20170224-0757.zip
Kernel Source
LineageOS-based AOKP Nougat, latest is v05 for ROM aokp_Z00L_nougat_unofficial_2017-02-07_1615.zip
Kernel Source
Note: Rom's dev recommend AOKP as the best battery backup ROM (LineageOS-based) under his care
LineageOS-based OctOS Nougat, latest is v05 for ROM OCT-N-WEEKLY-20170224-2334-Z00L.zip
Kernel Source
LineageOS-based Resurrection Remix Nougat, latest is v05 for ROM RR-N-v5.8.2-20170218-Z00L-OFFICIAL.zip (note: this rom is not the latest one from RR-N, I didn't manage to download it coz it was released yesterday (Feb 28th), maybe next update. Could probably use this kernel on the latest rom, if nothing major was released, check the rom dev changelog)
Kernel Source
After flashing kernel, configure using Kernel Adiutor
if you can't wait, maybe try your hand in compiling a kernel, full workflow HERE
reserved 3
reserved 4
Finally
Finally pokipokipxorn is back with his awesome kernels
Nice work bro :good: We all are waiting your kernels
I suggest you to create a poll on this thread, as we are doing all our work for our beloved users and let them decide for which rom they want your battery saver kernel
prakharluv said:
Finally pokipokipxorn is back with his awesome kernels
Nice work bro :good: We all are waiting your kernels
I suggest you to create a poll on this thread, as we are doing all our work for our beloved users and let them decide for which rom they want your battery saver kernel
Click to expand...
Click to collapse
Agreed with @prakharluv, he's right @pokipokipxorn add a poll here that will be more handy for us
I'm getting problems trying to upload to Google Drive, if any of u experience file corruption after downloading the kernels, please post.
Kernel are up for roms
- LineageOS 13 Marshmallow
- Slim7 Nougat
- OctOS Nougat
Polls will be up much later, gotta collect rom list, ty for the suggestion.
pokipokipxorn said:
Kernel are up for roms
- LineageOS 13 Marshmallow
- Slim7 Nougat
- OctOS Nougat
Click to expand...
Click to collapse
Do we have to wipe cache or just reboot directly after flash kernel img?
HanszRN said:
Do we have to wipe cache or just reboot directly after flash kernel img?
Click to expand...
Click to collapse
Just reboot directly, but if you use SuperSU, you have to flash it again
Did you make a backup of your critical partitions? follow 1st post.
pokipokipxorn said:
I'm getting problems trying to upload to Google Drive, if any of u experience file corruption after downloading the kernels, please post.
Click to expand...
Click to collapse
pokipokipxorn said:
Kernel are up for roms
- LineageOS 13 Marshmallow
- Slim7 Nougat
- OctOS Nougat
Click to expand...
Click to collapse
Flashed OctOS kernel on latest OctOS weekly build and its working fine Nice work bro :good:
pokipokipxorn said:
Just reboot directly, but if you use SuperSU, you have to flash it again
Did you make a backup of your critical partitions? follow 1st post.
Click to expand...
Click to collapse
hai,brother
please u can compile this kernel for device ZE500KL aka Z00ED too?
thanks
Kernel are up for roms
- Tesla Nougat
- Resurrection Remix Nougat
Adhe_88 said:
hai,brother
please u can compile this kernel for device ZE500KL aka Z00ED too?
thanks
Click to expand...
Click to collapse
Which ROM? Note that I don't own the device, and I need you to post a screenshot of the kernel version or commits if any. (Phone Settings > About Phone > Kernel Version). I won't be able to flash or test the kernel.
pokipokipxorn said:
Which ROM? Note that I don't own the device, and I need you to post a screenshot of the kernel version or commits if any. (Phone Settings > About Phone > Kernel Version). I won't be able to flash or test the kernel.
Click to expand...
Click to collapse
maybe u can compile AICP rom and this source kernel my device https://github.com/Rygebin/android_kernel_asus_msm8916
thanks ?i appreciate it ?
Adhe_88 said:
maybe u can compile AICP rom and this source kernel my device https://github.com/Rygebin/android_kernel_asus_msm8916
thanks i appreciate it
Click to expand...
Click to collapse
So it's AICP 7.1.1 for Z00ED? Kernel source should be this one, note the commit gba1e18b from your screenshot.
I will try, it's 2am now, I got to go. cyall tomorrow.
pokipokipxorn said:
So it's AICP 7.1.1 for Z00ED? Kernel source should be this one, note the commit gba1e18b from your screenshot.
I will try, it's 2am now, I got to go. cyall tomorrow.
Click to expand...
Click to collapse
yeah ??
thanks brother ?
There is two files. Which one have to flash?.
prakharluv said:
Flashed OctOS kernel on latest OctOS weekly build and its working fine Nice work bro :good:
Click to expand...
Click to collapse