Develop Bugs

[Q] boot loop on reboot

Hey guys,
Got a very weird problem here. I have previously flashed a CM10 nightly to my One X (international) and everything has been fine for around 3 weeks. Decided i wanted to try our the ViperX ROM. Previously upon flashing this ROM it just bootlooped but after another try with a slightly different method, i managed to get it to boot and all was merry. After titanium restore i rebooted, and this once again put me into a bootloop. Cannot get the ROM to boot. Why is this!!! Switched back to CM10. :good:

You need to do
fastboot flash boot boot.img
You may have done
fastboot boot boot.img

BenPope said:
You need to do
fastboot flash boot boot.img
You may have done
fastboot boot boot.img
Click to expand...
Click to collapse
Still doesnt boot man, im sure i flashed the boot image properly. This is the rundown of my flash process:
1: install from sd
2: in recovery, factory reset, wipe cache, wipe dalvic cache
3: Boot into fastboot and flash the boot.img
4: Reboot.
So it booted but into viper X, but after restoring with Titanium i was unable to get it to boot again.
I also tried "fastboot erase cache" to no avail

In fastboot type fastboot erase cache

Jamekerr said:
So it booted but into viper X, but after restoring with Titanium i was unable to get it to boot again.
Click to expand...
Click to collapse
Did you restore system apps or data?
Where does it stop booting, what is on the screen?

With tb, make sure you restore user apps only, none of the system apps.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app

eyosen said:
With tb, make sure you restore user apps only, none of the system apps.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Click to expand...
Click to collapse
Sorry forgot to mention I also used the "fast book erase cache" command.
As for titanium I restored all user apps and data and now that you mention it that could be the problem. I'll have another crack tomorrow and let you know.
Main reason I want to switch is I need much better battery life than CM10 but only temporarily. Can anyone recommend viperx as being a significant improvement?

BenPope said:
Did you restore system apps or data?
Where does it stop booting, what is on the screen?
Click to expand...
Click to collapse
It comes up with "HTC" vibrates then the viper crawls across the screen and it stops at the "htcONE" logo.

Restored apps and app data and guess what. Still doesn't boot. WHY! Going to just try apps, no data at ALL. Will report back.

I dunno why it won't start, double check you have the right boot.img (download it again and flash it again), in recovery erase cache and dalvik cache.

same issue
Hi i am also getting the same problem, i used the viper rom and others but it goes past the HTC logo looks as though it works but the lock ring is froze up and then it reboots itself over and over doing the same thing each time. Ive tried One_X_All-In-One_Kit_v1.2 and the manual CMD fastboot tutorial i dont know what to do to fix this, can anyone help me please?
EDIT* I seem to have it working now (fingers crossed), i used 'Nocturnal_Special_Edition_4.0_Odex' so thx to their good work that i now have a working rom for my phone phew
EDIT 20 MIN LAter* OK looks like i did something i shouldnt, it seemed to work, i made a change in the settings and then it rebooted and continued to reboot over and over so i tried installing a rom again and now it just stays at the htc quietly brilliant screen, what have i done this phone is now not so brilliant as its looking more and more that ive goosed it Any help apreciated.

boot.img

Help please
Hello,
I have 1x (CID 203) unlocked and rooted with cwm recovery. I had Cyanogenmod 10 nighly on it, well in hope of no bugs like in CM10 I flashed this http://forum.xda-developers.com/showthread.php?t=1763240 to it. Well it seemed to work a moment but then the device started rebooting randomly. I couldn't boot to recovery (strange?), the recovery screen flashed less than a second and the phone started to boot normally again. After a few tries (and reflashing recovery) I luckily got into the recovery. Tried to restore a nandroid backup which I made earlier yesterday. CWM said that the restore was successful but the device didnt boot anymore. Only shows htc logo and cyanogenmod loading screen. But nothing happens. Well, then I flashed Android Revolution HD 10.3. (with wiping the system data and so on) but it wont load any longer than the htc one logo screen. Rom installed fine and I flashed the boot.img.
Now I'm able to get into recovery and fastboot and charge my phone but how could I safely and surely return my phone to stock or make the ARHD work without completely bricking it? I'm thinking that relocking my device is not very safe if the RUU fails to install. What do you think? Can the firmware updates cause this problem to happen? Can I flash ARHD 9.7.2 to my device? Too bad I can't ask these questions in the ARHD thread....
In bootloader my phone says
Code:
hboot-0.94.0000
radio 1.1204.104.14
Any advice is highly appreciated, I'm not ready to bury my phone yet
Edit. ARHD 9.7.2 flashed correctly. Any ideas why the ARHD 10.3 keeps bootlooping? Yes, I have flashed the correct boot.imgs.

BenPope said:
I dunno why it won't start, double check you have the right boot.img (download it again and flash it again), in recovery erase cache and dalvik cache.
Click to expand...
Click to collapse
If I restore apps only it does boot however any sort of data and it refuses to. Very annoying as I am not able to retain texts accounts etc. I have a feeling it's because I originally backed up on a jellybean ROM and the data just doesn't want to work on ics

Squbbe said:
Hello,
I have 1x (CID 203) unlocked and rooted with cwm recovery. I had Cyanogenmod 10 nighly on it, well in hope of no bugs like in CM10 I flashed this http://forum.xda-developers.com/showthread.php?t=1763240 to it. Well it seemed to work a moment but then the device started rebooting randomly. I couldn't boot to recovery (strange?), the recovery screen flashed less than a second and the phone started to boot normally again. After a few tries (and reflashing recovery) I luckily got into the recovery. Tried to restore a nandroid backup which I made earlier yesterday. CWM said that the restore was successful but the device didnt boot anymore. Only shows htc logo and cyanogenmod loading screen. But nothing happens. Well, then I flashed Android Revolution HD 10.3. (with wiping the system data and so on) but it wont load any longer than the htc one logo screen. Rom installed fine and I flashed the boot.img.
Now I'm able to get into recovery and fastboot and charge my phone but how could I safely and surely return my phone to stock or make the ARHD work without completely bricking it? I'm thinking that relocking my device is not very safe if the RUU fails to install. What do you think? Can the firmware updates cause this problem to happen? Can I flash ARHD 9.7.2 to my device? Too bad I can't ask these questions in the ARHD thread....
In bootloader my phone says
Code:
hboot-0.94.0000
radio 1.1204.104.14
Any advice is highly appreciated, I'm not ready to bury my phone yet
Edit. ARHD 9.7.2 flashed correctly. Any ideas why the ARHD 10.3 keeps bootlooping? Yes, I have flashed the correct boot.imgs.
Click to expand...
Click to collapse
Try the fast boot erase cache command and see if that solves the boot issue. If not make sure in recovery your have cleared cache partition performed a factory reset and also cleared the dalvik cache. Again if none of these work try re flashing the boot.img or perhaps try another rom that is known to be stable.

HTC One X stuck on home screen

Hello!
After some fiddling around I have finally succeeded into installing the MIUI custom rom. (had a heck of a work around to perform because I forgot to put the custom ROM on my SD card first.)
Right now, I've got Clockwork Recovery 5.8.4.0 installed with the latest miui. Fastboot is also installed and working, and my phone is unlocked. The correct boot.img has also been installed.
It even boots. BUT. After it has showed the MIUI logo and goes to my home screen, it starts loading for like 4-5 seconds where everything still works, and it then stops. Crash. The screen freezes and my phone reboots. It seemed like a SIM card problem to me, but even removing the SIM card and booting my phone wont solve this issue. Does anyone have any clue what I can do?
Summary of installed software:
Clockwork Recovery V5.8.4.0
HBOOT 1.12.0000
Latest MIUI for One X (downloaded this afternoon)
Latest ADB Development Kit. (Not used though)
Latest Flashboot.
Factory Reset performed (Whole phone is empty except for above mentioned programs.
Thanks in Advance!
P

Erase Cache
While in Fastboot Mode .Perform This command
Fastboot erase cache
Should do the job for u!
I would suggest flash the boot.img again and then erase cache again.Will work

Tried it, but..
I'm afraid it didn't do the trick.
Even flashing another custom ROM (Android Revolution HD16) with it's corresponding boot.img didn't do the job. The crashing times have also changed now. It sometimes works for like 5-6 seconds into booting the homescreen, and sometimes it doesn't even reach it.

Piedro92 said:
I'm afraid it didn't do the trick.
Even flashing another custom ROM (Android Revolution HD16) with it's corresponding boot.img didn't do the job. The crashing times have also changed now. It sometimes works for like 5-6 seconds into booting the homescreen, and sometimes it doesn't even reach it.
Click to expand...
Click to collapse
Clockwork Recovery V5.8.4.0
HBOOT 1.12.0000
^^ for ARHD 16 u need hboot 1.33 , 1.36 depending on your CID
for miui did you do full wipe?

Piedro92 said:
I'm afraid it didn't do the trick.
Even flashing another custom ROM (Android Revolution HD16) with it's corresponding boot.img didn't do the job. The crashing times have also changed now. It sometimes works for like 5-6 seconds into booting the homescreen, and sometimes it doesn't even reach it.
Click to expand...
Click to collapse
Did you wipe cache and dalvik cache? I think ARHD does that anyway, but might be worth doing the superwipe.
Oh, and if you're restoring system data or system apps with Titanium backup, stop it.

HBOOT!
I am afraid ur not on the right CID version for installing JB roms.
Please update ur Hboot

@ali3nfr3ak: Yes, I did a full wipe before MIUI. After every flash I do a Dalvik Cache Wipe, Factory Reset Wipe and Cache Wipe. Even the fastboot receive a cache wipe after every flash.
How do I update my HBOOT? The rest seemed pretty straight forward, but there are tons of versions out there, and I do not know which one I should be taking. And what is CID? I've also been having troubles porting a Super Wipe toward my mobile phone. Can a Super Wipe be performed within fastboot/recovery?
Haha and no, I'm not using Titanium Backup

Right, I've succesfully restored my phone to it's old state. Flashing MIUI again provided the same error. Could it be that my hBoot is out of date here? My One X still has the 4.0.4 android version, whilst MIUI is based on 4.1, right?

Change the rom, miui isn't good.

[Q] Samsung Galaxy s3 i747 stuck in Cyanogenmod boot screen

Hello:
So I rooted my phone today and I downloaded the app, "ROM Manager," and downloaded a ROM from it, which I read that I'm not supposed to do, afterwards. Now, whenever I turn my phone on, it only shows the Cyanogenmod boot animation. I read in another thread that I should clear the cache, which I did, but it did not help. Should I try and flash it to the stock? Please help! I am inexperienced with this and I don't know what to do. Thanks in advance!

dallinrigby said:
Hello:
So I rooted my phone today and I downloaded the app, "ROM Manager," and downloaded a ROM from it, which I read that I'm not supposed to do, afterwards. Now, whenever I turn my phone on, it only shows the Cyanogenmod boot animation. I read in another thread that I should clear the cache, which I did, but it did not help. Should I try and flash it to the stock? Please help! I am inexperienced with this and I don't know what to do. Thanks in advance!
Click to expand...
Click to collapse
Alright. First off: what OS were you running before you went to cyanogenmod? was it 4.0.4? 4.1.x? 4.2.x? or 4.3.x?
Second, give us more information about the phone.
Third, you might have to go into recovery mode, wipe your phone (theres two options in the main menu, and one in the advanced called wipe dalvik). Then youll have to reinstall Cyanogenmod.

ChinDaChin said:
Alright. First off: what OS were you running before you went to cyanogenmod? was it 4.0.4? 4.1.x? 4.2.x? or 4.3.x?
Second, give us more information about the phone.
Third, you might have to go into recovery mode, wipe your phone (theres two options in the main menu, and one in the advanced called wipe dalvik). Then youll have to reinstall Cyanogenmod.
Click to expand...
Click to collapse
Your phone will get stuck if you did not clear the dalvik as well as the cache. I would recommend first clearing cache again and also dalvik before rebooting back into the operating system or doing something else which may not be necessary.

shortydoggg said:
Your phone will get stuck if you did not clear the dalvik as well as the cache. I would recommend first clearing cache again and also dalvik before rebooting back into the operating system or doing something else which may not be necessary.
Click to expand...
Click to collapse
I have already tried to clear the cache and the dalvik and then did a reboot but it didn't change anything.

shortydoggg said:
Your phone will get stuck if you did not clear the dalvik as well as the cache. I would recommend first clearing cache again and also dalvik before rebooting back into the operating system or doing something else which may not be necessary.
Click to expand...
Click to collapse
ChinDaChin said:
Alright. First off: what OS were you running before you went to cyanogenmod? was it 4.0.4? 4.1.x? 4.2.x? or 4.3.x?
Second, give us more information about the phone.
Third, you might have to go into recovery mode, wipe your phone (theres two options in the main menu, and one in the advanced called wipe dalvik). Then youll have to reinstall Cyanogenmod.
Click to expand...
Click to collapse
I was running the stock jellybean before I installed cryogenmod...my phone is a galaxy s3 it47 (AT&T) network unlocked phone. Also, at the bottom in recovery mode it says
ClockworkMod Recovery v6. 0. 4. 5
I'm not sure whether or not this is important but it is the only thing that I can think of to tell you about my phone.
I don't care whether we keep my data, I just want it to be able to turn on! Can I just restore it using Odin somehow? I tried the wipe user memory option in recovery mode and that didn't help...

Personally, I hate both ROM manager and clockworkmod.
It sounds like you just need to wipe data (or factory reset), cache and dalvik, and then reboot. If that doesn't work, then you might have flashed a version of cyanogenmod that may not be compatible with your bootloader, and may have to manually try another ROM.

shortydoggg said:
Personally, I hate both ROM manager and clockworkmod.
It sounds like you just need to wipe data (or factory reset), cache and dalvik, and then reboot. If that doesn't work, then you might have flashed a version of cyanogenmod that may not be compatible with your bootloader, and may have to manually try another ROM.
Click to expand...
Click to collapse
I tried to do a factory reset, it didn't help as far as I know. How do i manually try another rom?

dallinrigby said:
I tried to do a factory reset, it didn't help as far as I know. How do i manually try another rom?
Click to expand...
Click to collapse
Can you tell us what version of touchwiz you were running before you tried rooting it? It's important if it's past 4.3.x, or before 4.3.x. Do the following if you were running 4.3.x before you rooted.
Go to http://download.cyanogenmod.org/?device=d2att&type=
Choose the one named: cm-10.2.0-d2att.zip
Download it and save it to your SD Card.
Go here and download 10.2: http://wiki.cyanogenmod.org/w/Google_Apps and put it on your SD card with the above .zip.
Once thats done, power off your phone. Go into recovery mode (volume up + home + power).
Wipe Data/Factory Reset
Wipe Cache partition
Advanced -> wipe Dalvik Cache
Go back, and choose Install Zip
Choose zip from /storage/sdcard (find your cm10.2 zip, run it. then run the gapps)
After you "installed" both zips, go back to the main menu and reboot system now
This will be a clean install of 10.2.
FYI: Clockworkmod Recovery is v6.0.4.5, so you have the most up to date.

ChinDaChin said:
Can you tell us what version of touchwiz you were running before you tried rooting it? It's important if it's past 4.3.x, or before 4.3.x. Do the following if you were running 4.3.x before you rooted.
Choose the one named: cm-10.2.0-d2att.zip
Download it and save it to your SD Card.
Once thats done, power off your phone. Go into recovery mode (volume up + home + power).
Wipe Data/Factory Reset
Wipe Cache partition
Advanced -> wipe Dalvik Cache
Go back, and choose Install Zip
Choose zip from /storage/sdcard (find your cm10.2 zip, run it. then run the gapps)
After you "installed" both zips, go back to the main menu and reboot system now
This will be a clean install of 10.2.
FYI: Clockworkmod Recovery is v6.0.4.5, so you have the most up to date.
Click to expand...
Click to collapse
I don't know what version I had. Is there a way for me to tell? I just had whatever I bought it with, I never downloaded anything else.
It says on that second link to download Torrent or via It Vends, is this the right place, and if so what do I pick?
Thanks by the way, also is there a way I could do this with Odin?

dallinrigby said:
I don't know what version I had. Is there a way for me to tell? I just had whatever I bought it with, I never downloaded anything else.
Click to expand...
Click to collapse
I used Goo.im. It's a funky looking website, but it's legitimate. I didn't do this with Odin, I used Cyanogenmod Installer :silly:
If you follow what I posted before, it will update everything, and you will run cyanogenmod 10.2. (What I'm running on my s3). HOWEVER, it will update your phone to 4.3. This means you cannot downgrade it, or it will be bricked. By downgrade, I mean you will not be able to run anything before 4.3. (So you can ONLY install roms that are 4.3, or jellybean).
I'm pretty sure you already updated everything since its stuck in the boot loop.
Any chance you did a nandroid backup(before you did the root)? If not, you've got nothing to lose and might as well go through with CM 10.2 (in my honest opinion).

ChinDaChin said:
I used Goo.im. It's a funky looking website, but it's legitimate. I didn't do this with Odin, I used Cyanogenmod Installer :silly:
If you follow what I posted before, it will update everything, and you will run cyanogenmod 10.2. (What I'm running on my s3). HOWEVER, it will update your phone to 4.3. This means you cannot downgrade it, or it will be bricked. By downgrade, I mean you will not be able to run anything before 4.3. (So you can ONLY install roms that are 4.3, or jellybean).
I'm pretty sure you already updated everything since its stuck in the boot loop.
Any chance you did a nandroid backup(before you did the root)? If not, you've got nothing to lose and might as well go through with CM 10.2 (in my honest opinion).
Click to expand...
Click to collapse
Okay, so now it says Android system recovery <3e> at the top and at the bottom is this:
#MANUAL MODE#
--Applied Multi-CSC...
Applied the CSC-code : ATT
Successfully applied multi-CSC
Then when I pushed install from sdcard it said E:failed to verify whole file signature
Do i need to unzip it?

dallinrigby said:
Okay, so now it says Android system recovery <3e> at the top and at the bottom is this:
#MANUAL MODE#
--Applied Multi-CSC...
Applied the CSC-code : ATT
Successfully applied multi-CSC
Then when I pushed install from sdcard it said E:failed to verify whole file signature
Click to expand...
Click to collapse
Don't lose hope, but every site/page I check, it says the error is with you flashing through Rom Manager. It's okay though, there has to be a solution.
I'm going to continue looking for the solution. If you could try and remember what version of the OS you were running before you tried to root, it would help out SO MUCH!
LOL., I forgot to hit post on this.
And no, don't unzip it. The phone can read it fine.
Anyway, after some quick reading, a few people are saying its either your rom that is corrupted, or you don't have the proper recovery. It can't be the rom, because the rom was downloaded from the source. So chances are its your recovery. I'm not sure if you can download the CWM recovery, and flash it from recovery. (if that makes sense?)

ChinDaChin said:
Don't lose hope, but every site/page I check, it says the error is with you flashing through Rom Manager. It's okay though, there has to be a solution.
I'm going to continue looking for the solution. If you could try and remember what version of the OS you were running before you tried to root, it would help out SO MUCH!
LOL., I forgot to hit post on this.
And no, don't unzip it. The phone can read it fine.
Anyway, after some quick reading, a few people are saying its either your rom that is corrupted, or you don't have the proper recovery. It can't be the rom, because the rom was downloaded from the source. So chances are its your recovery. I'm not sure if you can download the CWM recovery, and flash it from recovery. (if that makes sense?)
Click to expand...
Click to collapse
I don't really understand this stuff very much, and also I am pretty sure my android version before was 4.1.2, that's jelly bean right? is that what you meant?

If it's CWM that is the problem, you can download TWRP and flash it via Odin if you can get into download mode. Then, you can use TWRP to flash a custom ROM.

audit13 said:
If it's CWM that is the problem, you can download TWRP and flash it via Odin if you can get into download mode. Then, you can use TWRP to flash a custom ROM.
Click to expand...
Click to collapse
Where do i get TWRP? It doesn't say that I have Clockwork anymore, since I factory reset it

dallinrigby said:
I don't really understand this stuff very much, and also I am pretty sure my android version before was 4.1.2, that's jelly bean right? is that what you meant?
Click to expand...
Click to collapse
Sorry.
I'm kind of conflicted on what's going on with your phone. It is partially a problem with going through Rom Manager to flash cyanogenmod.
audit13 said:
If it's CWM that is the problem, you can download TWRP and flash it via Odin if you can get into download mode. Then, you can use TWRP to flash a custom ROM.
Click to expand...
Click to collapse
I guess you can try TWRP. I haven't used TWRP so I can't comment on it. I'll try finding an explanatory video that is simple to follow. (Don't throw out Cm10.2, or the gapps. You will need those to get Cyanogenmod on your phone!)

[Q] which TWRP?

Hi everyone. Just guy my note tablet. Rooted with towlie.
Build number kot49h.p607tuvuane2
Finding a bit of confusion on which TWRP I should install. I did one with Odin, and it didn't take.
Can someone point me to right file and/or directions if i need to downgrade first?
I want to start playing and customizing, but cannot back up or reflash.

redheadplantguy said:
Hi everyone. Just guy my note tablet. Rooted with towlie.
Build number kot49h.p607tuvuane2
Finding a bit of confusion on which TWRP I should install. I did one with Odin, and it didn't take.
Can someone point me to right file and/or directions if i need to downgrade first?
I want to start playing and customizing, but cannot back up or reflash.
Click to expand...
Click to collapse
most stable version would be 2.6.3.3

buhohitr said:
most stable version would be 2.6.3.3
Click to expand...
Click to collapse
Have heard a few things about needing an Odin firmware downgrade. Is that necessary with my firmware? And should I use Odin, or ADB?
Really appreciate the info. I want to tinker, but without working recovery, I'm a bit Leary.

redheadplantguy said:
Have heard a few things about needing an Odin firmware downgrade. Is that necessary with my firmware? And should I use Odin, or ADB?
Really appreciate the info. I want to tinker, but without working recovery, I'm a bit Leary.
Click to expand...
Click to collapse
the version I stated is most stable, other twrp version may cause cache corruption and other issues.

buhohitr said:
the version I stated is most stable, other twrp version may cause cache corruption and other issues.
Click to expand...
Click to collapse
the closest release i could find was twrp 2331.
i flashed with odin. but when i tried to reboot to recovery, i got a scrambled, pixelated screen which after a few seconds rebooted system.

redheadplantguy said:
the closest release i could find was twrp 2331.
i flashed with odin. but when i tried to reboot to recovery, i got a scrambled, pixelated screen which after a few seconds rebooted system.
Click to expand...
Click to collapse
Get it here http://www.techerrata.com/browse/twrp2/lt03wifiue
You need to wipe cache, davik cache and data, then flash the rom.

buhohitr said:
Get it here http://www.techerrata.com/browse/twrp2/lt03wifiue
You need to wipe cache, davik cache and data, then flash the rom.
Click to expand...
Click to collapse
I found that version on the link, but i thought that was for the Exynos chipset.
I have the Qualcomm LTE version. Will it still work?

redheadplantguy said:
I found that version on the link, but i thought that was for the Exynos chipset.
I have the Qualcomm LTE version. Will it still work?
Click to expand...
Click to collapse
For Qualcomm LTE the version is 2.6.3.1
https://goo.im/devs/OpenRecovery/lt03ltexx/openrecovery-twrp-2.6.3.1-lt03ltexx.zip/

Hi,
This post saved me, I installed TWRP 2.8 and my system froze, I couldn't get past the Samsung 10.1 screen.
But found this post and flashed 2.6.3.3 via Odin and it all went smoothly.
PS Goo.img.com dosen't have the files anymore

buhohitr said:
For Qualcomm LTE the version is 2.6.3.1
https://goo.im/devs/OpenRecovery/lt03ltexx/openrecovery-twrp-2.6.3.1-lt03ltexx.zip/
Click to expand...
Click to collapse
I currently have no recovery. I tried flashing 2.8 originally.
How would i clear cache, data, and all before trying to flash 2631?

redheadplantguy said:
I currently have no recovery. I tried flashing 2.8 originally.
How would i clear cache, data, and all before trying to flash 2631?
Click to expand...
Click to collapse
No, you flash TWRP 2631, then boot into the twrp then select advance then put a check for cache, davik cache and data, then swipe. Once done just flash your rom. I would copy the rom to the download folder on the internal storage (/sdcard/download/) before flash your new twrp.

Is 2.6.3.3 more reliable / stable in terms of making / restoring nandroids? I just got my new Note last week (p607t) and flashed xKat with TWRP at one point, restoring apps from (some with data to avoid re-entering account info or redoing complex settings...) I have had one problem however, when I was almost done restoring, I noticed that I was getting fc's, particularly with games that required an internet connection. I wiped dalvik and cache in TWRP, then hit fix permissions, which I think screwed everything up (maybe due to the bootloader / firmware base mismatch). Anyway, my most recent nandroid was with the fresh xKat install, but fixing permissions caused this weird "hot"-bootloop where it skipped the boot animation but start loading immediately after rebooting, but then freezing before all boot tasks had completed (ex. some optimizations on boot with Android Tuner Pro, FolderMount mounting folders, loading xposed modules...)
Not wanting to re-restore, I first just tried dirty-flashing the ROM again (only wiped dalvik and cache, but did something I hadn't tried before: in the wipe menu I hit "repair partition" for system and data, pre-flash). Luckily it worked and set everything straight... but just want to make sure, 2.6.3.3 is still recommended as the most stable version (in my experience, fixing permissions in recovery can be very hit or miss on any version)?
2 questions before I roll back my recovery, I think these "killer features" (totally serious, #2 has been huge since I got a couple of the newish flash drives with micro usb on one side and regular usb on the other) of TWRP were implemented in 2.6.3.3, but just want to make sure: can you 1) compress nandroids and 2) mount a USB OTG drive and flash from or backup to it? Thanks all, really loving my new Note (massive upgrade from my Note 8!)

buhohitr said:
No, you flash TWRP 2631, then boot into the twrp then select advance then put a check for cache, davik cache and data, then swipe. Once done just flash your rom. I would copy the rom to the download folder on the internal storage (/sdcard/download/) before flash your new twrp.
Click to expand...
Click to collapse
I HAVE flashed 2631 for the qualcomm lte.
I've done or several times since you told me that's the best version.
IT WILL NOT BOOT INTO TWRP. it's a scrambled screen. That's all. No touch options. No check boxes. After a minute, tablet reboots itself. I am on stock firmware still. Rooted.
Maybe I should just try CWM. never had this much problems with twrp on any other device.

redheadplantguy said:
I HAVE flashed 2631 for the qualcomm lte.
I've done or several times since you told me that's the best version.
IT WILL NOT BOOT INTO TWRP. it's a scrambled screen. That's all. No touch options. No check boxes. After a minute, tablet reboots itself. I am on stock firmware still. Rooted.
Maybe I should just try CWM. never had this much problems with twrp on any other device.
Click to expand...
Click to collapse
How about wipe cache/davikcache/data with your stock recovery (just reflash your stock recovery). After that let it boot up, then power down and flash twrp. Once done, don't boot up, boot back to twrp . Let me know how it goes.

Cool. I can try that when I get home. Do you have a link handy for the stock recovery?

redheadplantguy said:
Cool. I can try that when I get home. Do you have a link handy for the stock recovery?
Click to expand...
Click to collapse
Please try this twrp. Many ppl reported it's working for p607t.
http://forum.xda-developers.com/showpost.php?p=53138918&postcount=776
If not working then we will go for stock recovery.

buhohitr said:
Please try this twrp. Many ppl reported it's working for p607t.
http://forum.xda-developers.com/showpost.php?p=53138918&postcount=776
If not working then we will go for stock recovery.
Click to expand...
Click to collapse
THANK YOU SO MUCH! TWRP booted right up, and nandroid in progress. now I'll be able to try some custom ROM's and play in system.
:laugh:

[Q] Boot loop after flashing TWRP recovery !

Hello everyone, I have a problem with my xperia S, any help would be greatly appreciated! Let's start from the beginning, I'll try to be brief :
So, I flashed TWRP recovery using the app "RASHR" (I was using the Pure AOSP Lollipop rom when doing this, if it can help), which caused my phone to always boot the recovery and nothing else. I managed to flash the rom again (I made sure to wipe using "factory reset" and "dalvik cache" before installing), and it seemd to work perfectly, but then I rebooted the phone, and got stuck at the sony logo, no recovery available.
I flashed TWRP recovery (stock-6.1.A.0.452-twrp-2.4.0.0.elf) using flashtool, then tried to install another rom (Paranoid Android, found on this thread : http://forum.xda-developers.com/showthread.php?t=2573345). The first boot was successful, but as soon as I reboot the phone, I'm stuck in a bootloop again, with a little difference : when the sony logo appears, the led becomes pink for a few seconds. No access to recovery. Then the led lights off, the logo disappears, and the phone reboots. Again and again. I just reinstalled the same recovery and tried to wipe and fix permissions, but it does not solve the bootloop, and I don't know what to do...
Could it be possible that "rashr" did a bad install of TWRP and corrupted my recovery/bootloader partition or something ?
EDIT : I reinstalled Pure AOSP Lollipop, and now for some reason, no boot loop anymore... I don't understand why, but as long as it works... problem solved !

LegatoExia said:
Hello everyone, I have a problem with my xperia S, any help would be greatly appreciated! Let's start from the beginning, I'll try to be brief :
So, I flashed TWRP recovery using the app "RASHR" (I was using the Pure AOSP Lollipop rom when doing this, if it can help), which caused my phone to always boot the recovery and nothing else. I managed to flash the rom again (I made sure to wipe using "factory reset" and "dalvik cache" before installing), and it seemd to work perfectly, but then I rebooted the phone, and got stuck at the sony logo, no recovery available.
I flashed TWRP recovery (stock-6.1.A.0.452-twrp-2.4.0.0.elf) using flashtool, then tried to install another rom (Paranoid Android, found on this thread : http://forum.xda-developers.com/showthread.php?t=2573345). The first boot was successful, but as soon as I reboot the phone, I'm stuck in a bootloop again, with a little difference : when the sony logo appears, the led becomes pink for a few seconds. No access to recovery. Then the led lights off, the logo disappears, and the phone reboots. Again and again. I just reinstalled the same recovery and tried to wipe and fix permissions, but it does not solve the bootloop, and I don't know what to do...
Could it be possible that "rashr" did a bad install of TWRP and corrupted my recovery/bootloader partition or something ?
EDIT : I reinstalled Pure AOSP Lollipop, and now for some reason, no boot loop anymore... I don't understand why, but as long as it works... problem solved !
Click to expand...
Click to collapse
You flashed the TWRP in wrong way. You need to flash it by this method.

Mirhawk said:
You flashed the TWRP in wrong way. You need to flash it by this method.
Click to expand...
Click to collapse
Hello, and thanks for the answer ! After a few days using the Pure AOSP rom and rebooting several times without any problem, I just got a bootloop again yesterday, forcing me to reflash my rom to be able to use the phone again... will your method (including your tutorial in your signature, which I'm trying as I write this) solve the problem once and for all ? It's a real pain to redownload all my apps again and again and again because of those bootloops =(
Edit : finished following your tutorials, everything seems to work for the moment, hope it will stay stable this time... thanks for your help )

LegatoExia said:
Hello, and thanks for the answer ! After a few days using the Pure AOSP rom and rebooting several times without any problem, I just got a bootloop again yesterday, forcing me to reflash my rom to be able to use the phone again... will your method solve the problem once and for all ? It's a real pain to redownload all my apps again and again and again because of those bootloops =(
Click to expand...
Click to collapse
What did You do before the bootloop was caused? Did You try to flash the TWRP again?

Mirhawk said:
What did You do before the bootloop was caused? Did You try to flash the TWRP again?
Click to expand...
Click to collapse
No, I didn't, I was too afraid of creating another problem xD I just used the phone normally, installed apps from the play store, the last one being nova launcher (but I rebooted a few times after that without any issue)., things like that.
But after applying your tutorials to flash the Lollipop Pure AOSP rom, I think the problems were caused by :
1) a wrong recovery and/or flashing method : previously I used "stock-6.1.A.0.452-twrp-2.4.0.0.elf" which I flashed directly via flashtools with the phone in fastboot mode with the command "fastboot flash boot xxxxxx.elf". And although I didn't reinstall it after flashing the ROM, I suppose it left something in the recovery partition that caused the bootloop... ?
2) the fact that I didn't flash any "boot.img" at all before installing the ROM... inf fact, I didn't even knew it was necessary !
3) a bad ROM installation procedure : wipe, flash rom, gapps and SuperSU and THEN wiping cache and dalvik, restart
4) all of the above (!)
Anyways, after doing it "the right way", everything seems to work correctly for the moment. After installing the ROM, I followed your recovery tutorial using "openrecovery-twrp-2.8.5.0-LT26i.img", hope I did the right thing this time, hahah. Thank you again for your help !

LegatoExia said:
No, I didn't, I was too afraid of creating another problem xD I just used the phone normally, installed apps from the play store, the last one being nova launcher (but I rebooted a few times after that without any issue)., things like that.
But after applying your tutorials to flash the rom AND the recovery, I think the problems were caused by :
1) a wrong recovery and/or flashing method : previously I used "stock-6.1.A.0.452-twrp-2.4.0.0.elf" which I flashed directly via flashtools with the phone in fastboot mode with the command "fastboot flash boot xxxxxx.elf". And although I didn't reinstall it after flashing the ROM, I suppose it left something in the recovery partition that caused the bootloop... ?
2) the fact that I didn't flash any "boot.img" at all before installing the ROM... inf fact, I didn't even knew it was necessary !
3) a bad ROM installation procedure : wipe, flash rom, gapps and SuperSU and THEN wiping cache and dalvik, restart
4) all of the above (!)
Anyways, after doing it "the right way", everything seems to work correctly for the moment. Thank you again for your help !
Click to expand...
Click to collapse
Glad that it is worked for You. Yes, You did somethings wrong, which caused You bootloop, better explained as below:
1) The "stock-6.1.A.0.452-twrp-2.4.0.0.elf" is the stock kernel of ICS version of Xperia S. So if You flash it with a ROM, Your ROM won't boot.
See, each ROM consist of two main parts, one the kernel and other the is the remaining of ROM(apaps, data etc.) A ROM is compatible only with certain kernels, and if wrong kernel is used with a ROM, the ROM won't boot. This is what You were doing, using a stock kernel on non stock based ROM.
2) This essentially doesn't lead to boot loop. This step needs to be done sometimes if You occur a error while flashing ROM via TWRP sometimes.
3) Yes, this sometimes does cause issue, the procedure is always for a clean flash, -Wipe system, wipe data, wipe cache and wipe dalvik cache. Flash ROM and immediately wipe cache and dalvik cache.

Mirhawk said:
Glad that it is worked for You. Yes, You did somethings wrong, which caused You bootloop, better explained as below:
1) The "stock-6.1.A.0.452-twrp-2.4.0.0.elf" is the stock kernel of ICS version of Xperia S. So if You flash it with a ROM, Your ROM won't boot.
See, each ROM consist of two main parts, one the kernel and other the is the remaining of ROM(apaps, data etc.) A ROM is compatible only with certain kernels, and if wrong kernel is used with a ROM, the ROM won't boot. This is what You were doing, using a stock kernel on non stock based ROM.
2) This essentially doesn't lead to boot loop. This step needs to be done sometimes if You occur a error while flashing ROM via TWRP sometimes.
3) Yes, this sometimes does cause issue, the procedure is always for a clean flash, -Wipe system, wipe data, wipe cache and wipe dalvik cache. Flash ROM and immediately wipe cache and dalvik cache.
Click to expand...
Click to collapse
Okay, now I understand ! There are so many roms, kernels and things like that on the internet, it was quite confusing...
Thanks again good sir, your help was a precious time saver =D

LegatoExia said:
Okay, now I understand ! There are so many roms, kernels and things like that on the internet, it was quite confusing...
Thanks again good sir, your help was a precious time saver =D
Click to expand...
Click to collapse
can you please tell me how did you get out of the boot loop to begin with? i can't do anything...

Frostymoon said:
can you please tell me how did you get out of the boot loop to begin with? i can't do anything...
Click to expand...
Click to collapse
I guess You are on stock firmware and flashed the "stock-6.1.A.0.452-twrp-2.4.0.0.elf" or the twrp.img file via fastboot directly. Flash the DoomKernel from here via flashtool as kernel and it will work with stock and have recovery too. Use the blue coloured "Download Now" button and the extension of file is .elf.