I was using my phone flashed with Mokee Nightly rom and everything was working great until the screen stopped working for no obvious reason. It happened yesterday, I tried to use the phone and the Home button didn't open the screen anymore. Then, I tried to reboot the phone but all I could see was the blue led flashing as if the phone was booting but there was nothing on the screen. When I got back home, I tried to repair the problem and I was able to enter download mode, so I used that opportunity to reinstall the factory firmware with Odin. I was able to get it working but I'm just wondering what was the cause of this? I know I'm a serial flasher so maybe something got ****ed up while flashing it and it caused it to bug later?
Nico3d3 said:
I was using my phone flashed with Mokee Nightly rom and everything was working great until the screen stopped working for no obvious reason. It happened yesterday, I tried to use the phone and the Home button didn't open the screen anymore. Then, I tried to reboot the phone but all I could see was the blue led flashing as if the phone was booting but there was nothing on the screen. When I got back home, I tried to repair the problem and I was able to enter download mode, so I used that opportunity to reinstall the factory firmware with Odin. I was able to get it working but I'm just wondering what was the cause of this? I know I'm a serial flasher so maybe something got ****ed up while flashing it and it caused it to bug later?
Click to expand...
Click to collapse
With custom ROMs, especially nightlies, errors like this are not to be unexpected. Recall it is still undergoing development and may not be bug-free. If you must stick with this ROM, I'd suggest you wait for the stable now that you know what may happen.
Related
So just to state the lead up to the unbootable phone.
Condensed version:
Flashed to Bio360 (ONLY working rom that was running for me thus far)
After a week of use, phone would boot for 5 seconds until screen turned pixelated
reflashed but did nothing
flashed to ICS using download mode again and worked but with limited function as when I first flashed ICS before Bio360
flashed using CWM6 back to Bio360 but still same problem
now will not boot into CWM6 and gets the pixelated screen either way
WILL go into download mode so I tried a few more ROMs to hopefully write over whatever issue there is with the software but nothing
reflashed using ODIN the CWM to 5 and 6 but same problem (will not load to CWM at all now
tried a few more times in the precise order as the first time I ever got the phone working with Bio360 (STILL a messaged up screen)
More detailed account of things:
I originally tried updating to the ICS upgrade a few weeks ago but got stuck on the boot screen and other issues. I finally flashed the CWM6 and updated the rom via that to the Bio360 rom. I finally had a working phone again after countless hours of trying to get it working. I locked my screen after timeout to a pin number but actually found it was a pain in the behind so tried to switch back. However I used the 'settings' feature which was present on the home screen after boot that comes with the Bio360. Then I deleted the icon an could no longer find the one that I was originally using, but found the other newer icon in the applications. So I took the lock feature off. Though it did nothing and the phone still required the pin. I tried changing it etc etc etc and nothing worked.
So, I flashed the Bio360 rom again and tried to start fresh, only to find that most of the settings that I originally were using before the re-flash were still present. This lead me to believe the settings are not completely wiped and flashing through CWM6 does not do a pristine clean update. Then I read that I should have to clear any and all settings by factory reset, clear cache, partition or whatever other clear functions I found within CWM6. So I did that and everything was back in good order again.
That is until I woke up 3 days ago and found my phone 'bricked'. Not literally as I am told it is almost impossible to brick one of these. Upon rebooting the phone I found that it was booting to the Samsung logo and after about 5 seconds, the screen becomes pixelated with red and green colours, sometimes lines all over. The longer I leave it, the more the screen becomes a wash out.
So I tried flashing the rom again using CWM6 hoping this would fix, but the same thing occured. So I tried to use CWM5 hoping that would fix it but still the same. I tried flashing back to gingerbread, then ICS, then Bio360 as I originally did to get the phone working with Bio360 but the only thing that I can do now is boot into download mode. Anything else causes the screen to become pixelated and wil not boot past the messed up screen no matter how long I leave it.
I searched for other threads but only found threads based on a single large pixel or a physically damaged screen. However, the screen is still functional as when I boot to download mode or just before the screen becomes pixelated, everything looks great. Plus there was one time when I flashed to ICS I got into the blank screen with limited functional capacity as when I first flashed ICS and the pixelated screen disappeared. So this leads me to believe this is a software issue.
I believe that there is an issue with files being left behind that are corrupted or something similar but I cannot even boot to CWM in order to clear everything possible.
ANY IDEAS? I have explored every option that my limited understanding of software could.
picture of what it looks like
This is a crappy picture from my old phone of something like what it looks like.
https://plus.google.com/photos/111944628817208100010/albums/5793637254528885841
This is a capture after it was turned off even and I plugged it into my computer, displaying the battery charging animation, though turned pixelated after a few seconds.
My gut says hardware damage, like something inside the Tegra itself is fried, ESPECIALLY since it's happening sometimes while still in the bootloader (charging animation).
Try Kies emergency recovery. If it flashes successfully but still won't boot, or glitches out like this during the flash, you'll have to start the RMA process.
I am unsure if it would be a hardware issue though since the screen is fine during the 'download mode' and did boot into the stock recovery after a flash a while back, then flipped back to not getting past the Samsung logo and pixelating again.
Would I be able to load the download mode portion of the phone if it was a hardware issue?
I ask because my gut says the opposite.
flashing CWM 6 causes my phone to be unbootable and pixelated screen
So, I have tried to update the phone into whatever other ROM that I can possibly get working only to find out that after flashing a ROM that flashes the original recovery program included with Android, voilà! The phone works again and boots into the black screen with pull down menu. Back to square one for me.
Why would CWM6 be causing such a thing?
EaglesIII said:
So, I have tried to update the phone into whatever other ROM that I can possibly get working only to find out that after flashing a ROM that flashes the original recovery program included with Android, voilà! The phone works again and boots into the black screen with pull down menu. Back to square one for me.
Why would CWM6 be causing such a thing?
Click to expand...
Click to collapse
I'm on CWMR6 since the begining without any issue. Did you flash the touch or the non touch version ? Also whcih odin version are you using, maybe that makes a difference. The 1.82 and 1.85 are tested to be working fine with both cwmr 5 and 6. Also by reading your thread is seems you've never been able to flash through ICS one click, if possible try doing that.
ninthsense said:
I'm on CWMR6 since the begining without any issue. Did you flash the touch or the non touch version ? Also whcih odin version are you using, maybe that makes a difference. The 1.82 and 1.85 are tested to be working fine with both cwmr 5 and 6. Also by reading your thread is seems you've never been able to flash through ICS one click, if possible try doing that.
Click to expand...
Click to collapse
I have been using the cwm5/6 touch and non touch. I have tried flashing them both. I have been using the most suggested version of ODIN 1.85 to flash. I do not think that it would make a difference as to which ODIN version I use, but then again I am quite ignorant on software.
The first thing that I did was tried the flashing using the one click method. I could only get to a black screen with the pull down menu containing the turn wifi on/off etc. I read that the problem may be permissions but I have tried that using the CWM when it worked and I was still stuck at the black screen with pull down menu. Without CWM I have no way of doing anything really since everything is in zip form and without CWM you cant use the zips.
EaglesIII said:
I have been using the cwm5/6 touch and non touch. I have tried flashing them both. I have been using the most suggested version of ODIN 1.85 to flash. I do not think that it would make a difference as to which ODIN version I use, but then again I am quite ignorant on software.
The first thing that I did was tried the flashing using the one click method. I could only get to a black screen with the pull down menu containing the turn wifi on/off etc. I read that the problem may be permissions but I have tried that using the CWM when it worked and I was still stuck at the black screen with pull down menu. Without CWM I have no way of doing anything really since everything is in zip form and without CWM you cant use the zips.
Click to expand...
Click to collapse
Well then probably a logcat output to a developer would help understand the problem you're facing. Find some knowledgeable developer who can help you read the logcat and find the issue. Or post it here and maybe somebody would give you a clue.
EaglesIII said:
So just to state the lead up to the unbootable phone.
Condensed version:
Flashed to Bio360 (ONLY working rom that was running for me thus far)
After a week of use, phone would boot for 5 seconds until screen turned pixelated
reflashed but did nothing
flashed to ICS using download mode again and worked but with limited function as when I first flashed ICS before Bio360
flashed using CWM6 back to Bio360 but still same problem
now will not boot into CWM6 and gets the pixelated screen either way
WILL go into download mode so I tried a few more ROMs to hopefully write over whatever issue there is with the software but nothing
reflashed using ODIN the CWM to 5 and 6 but same problem (will not load to CWM at all now
tried a few more times in the precise order as the first time I ever got the phone working with Bio360 (STILL a messaged up screen)
More detailed account of things:
I originally tried updating to the ICS upgrade a few weeks ago but got stuck on the boot screen and other issues. I finally flashed the CWM6 and updated the rom via that to the Bio360 rom. I finally had a working phone again after countless hours of trying to get it working. I locked my screen after timeout to a pin number but actually found it was a pain in the behind so tried to switch back. However I used the 'settings' feature which was present on the home screen after boot that comes with the Bio360. Then I deleted the icon an could no longer find the one that I was originally using, but found the other newer icon in the applications. So I took the lock feature off. Though it did nothing and the phone still required the pin. I tried changing it etc etc etc and nothing worked.
So, I flashed the Bio360 rom again and tried to start fresh, only to find that most of the settings that I originally were using before the re-flash were still present. This lead me to believe the settings are not completely wiped and flashing through CWM6 does not do a pristine clean update. Then I read that I should have to clear any and all settings by factory reset, clear cache, partition or whatever other clear functions I found within CWM6. So I did that and everything was back in good order again.
That is until I woke up 3 days ago and found my phone 'bricked'. Not literally as I am told it is almost impossible to brick one of these. Upon rebooting the phone I found that it was booting to the Samsung logo and after about 5 seconds, the screen becomes pixelated with red and green colours, sometimes lines all over. The longer I leave it, the more the screen becomes a wash out.
So I tried flashing the rom again using CWM6 hoping this would fix, but the same thing occured. So I tried to use CWM5 hoping that would fix it but still the same. I tried flashing back to gingerbread, then ICS, then Bio360 as I originally did to get the phone working with Bio360 but the only thing that I can do now is boot into download mode. Anything else causes the screen to become pixelated and wil not boot past the messed up screen no matter how long I leave it.
I searched for other threads but only found threads based on a single large pixel or a physically damaged screen. However, the screen is still functional as when I boot to download mode or just before the screen becomes pixelated, everything looks great. Plus there was one time when I flashed to ICS I got into the blank screen with limited functional capacity as when I first flashed ICS and the pixelated screen disappeared. So this leads me to believe this is a software issue.
I believe that there is an issue with files being left behind that are corrupted or something similar but I cannot even boot to CWM in order to clear everything possible.
ANY IDEAS? I have explored every option that my limited understanding of software could.
Click to expand...
Click to collapse
I have the same problem, i bought mine in ebay, (i live outside USA so i cant get money back) my problem start when i try to install a apk, then, i try to restore with wipe in cwm (sometimes works, sometimes no) and eventually, only download mode work. I dont know what i do, but in one of my trys, ICS 4.04 works everything, but i was network lock,i try to downgrade to Gingerbread and the problem come back, i dont know what to do, i feel like i waste te money.
PD: I have the roger version
EDIT: I just flashed ICS from ATT And works, but i w ould like to root and i cant, every time that i flash CWM, the problem come back
EDIT 2: I use the one click to install ICS from att and works, its seem the problem is when i use a custom rom or the CWM, dont know why, its seems that is not hardware because ICS works perfect, but Every custom rom or CWM, cause the problem
Maybe is there a way torecreate all the internal partition, i dont know, or something like that, to make a clean install, I am starting to regret for buying this phone, maybe the problem is because is from rogers (a security rule maybe?)
Sorry for my english
EaglesIII : your phone has hardware malfunction.
It is basically trash.
*sorry*
Sent from my SGH-I927 using xda app-developers app
ericpeacock79 said:
EaglesIII : your phone has hardware malfunction.
It is basically trash.
*sorry*
Sent from my SGH-I927 using xda app-developers app
Click to expand...
Click to collapse
I dont Know, its happen similar to me, but if i use ICS from ATT, everything works right
---------- Post added at 03:05 AM ---------- Previous post was at 02:45 AM ----------
Ok, i learned something, when a flash the Gingerbread version, there is a error while booting (the first time that boot lik recovery) , the error is can't access to /system/csc/ATT/system/
When i use the ICS from ATT, that doesnt happen, maybe that is the problem? i dont know, maybe someone can tell us what are these files
There is a working solution, http://forum.xda-developers.com/showthread.php?t=1953672 thanks to Rawr0w0,its works when you flash in that order, my phone is rooted and full working in ICS, i hope that helps you
Hello,
I was recently attempting to flash the new Cyanogenmod 10 ROM to my phone and I've found myself in a bootloop (the logo just continuously circles). I actually know what error I made to cause this, but the problem is, I have no access to any recovery menus anymore. All I can access is download mode. I can still use Odin and connect to the phone, but other than that I'm at a loss for what to do. I have backups of everything, I just need to get the phone wiped and back to factory set and start over. Unfortunately, without a recovery menu I don't know what to do.
What should I do from here?
Solved it.
For anyone that has this issue in the future, I plugged into the computer and ran Odin and was able to have it install a stock ICS ROM and I just started over.
Good job with solving the issue on your own! :good:
Your issue and solution had been discussed on these forums already. As a tip for the next time you have an issue, make sure to use the search bar first. Cheers!
Okay, I don't know what the deal is but I've now screwed my second device lol
I have a T-Mobile H811 on 10H, my second to be exact, and after I follow instructions for low level root and flashing a recovery, everything works fine! For as long as I stay on that rooted stock image...
The moment I flash anything other than the rooted stock image my device looses sound, becomes extremely slow and unresponsive, with the SystemUI crashing constantly and restarting. Shows lock screen, doesn't respond to touch, and if it does it's only for a brief moment before it freezes and then shows "Optimizing Android", rinse, repeat.
This persists through returning to stock with a kdz. Once it begins, it doesn't stop, which is why I had to return my first device...... and it looks like I'll be returning this one as well :crying:
I am no stranger to the game, I was not on 10N, I made sure to use the right COM port (the diag one), I make sure to only flash things for the H811, so what in the world is happening to my device when I flash other roms? My first device I flashed BlissPop nightlies and thought that might have been the reason, this time I just flashed a modified stock image. I for the life of me cannot figure out what I'm doing wrong or how to undo the damage once it's been done.
I still have access to download mode and TWRP
I am desperate for help... I cannot seem to find anyone else who's had this issue. Missing those Nexus 5 days D:
Thanks in advanced
EDIT: I flashed back to stock and took the 10N update (it was like pulling teeth) and everything seems to be working again... but I'd really still like some insight as to what I did wrong lest I do it again.
And now I flashed Bliss and everything is working just fine... strange
Hi.
I have a problem with my D855. My phone is rooted and runs the fulmics ROM. Everything was working fine, , on Fulmics 5.3, except than one day, I was using my phone normally and then it crashed. I saw the phone rebooting, but for some reason it got stuck. The phone tried to boot unsuccessfully until the "firmware update" went through, after what it reboots again (unsuccessfully) and so on.
At that time, I was able to access twrp, do some backup, and flash properly with a downgraded version of fulmics (from 5.3 to 4.1).
It was able to boot again and use my phone like before. Yet, after one month of usage, the same problem happened on version 4.1. The phone crashed and now cannot boot.
Any idea of where it is coming from? Should I go back to stock? Should I contact customer service?
What did you do before the phone crashes ?
I think you probably should flash the stock ROM and wait for an other crash... or not.
Jb-kun said:
What did you do before the phone crashes ?
I think you probably should flash the stock ROM and wait for an other crash... or not.
Click to expand...
Click to collapse
I haven't done anything special. I think that the first time I was playing on candy crush. The second time I was just looking at pictures in my gallery.
I was using the ROM without any tweaks or extra modules such as Xposed. Just regular use.
Update on my situation: I switched back to stock ROM and it seems to work OK for now (it has been 4 days). So I will wait and see if new problems happen. By the way, it was extremely difficult for me to get back to Stock directly from fulmics ROM. I tried several methods that I have found on xda based on LGUP or LG Flash tool without success. For some reason I was not able to connect the phone to my PC in download mode.
The only way that I found was to use a nandroid backup that I did just after rooting the phone and that was based on stock ROM.
shewshain said:
I haven't done anything special. I think that the first time I was playing on candy crush. The second time I was just looking at pictures in my gallery.
I was using the ROM without any tweaks or extra modules such as Xposed. Just regular use.
Update on my situation: I switched back to stock ROM and it seems to work OK for now (it has been 4 days). So I will wait and see if new problems happen. By the way, it was extremely difficult for me to get back to Stock directly from fulmics ROM. I tried several methods that I have found on xda based on LGUP or LG Flash tool without success. For some reason I was not able to connect the phone to my PC in download mode.
The only way that I found was to use a nandroid backup that I did just after rooting the phone and that was based on stock ROM.
Click to expand...
Click to collapse
You can also use the Stock rom flashable from twrp. So you can wipe the system partition and get a "better situation" than a nandroid backup that should be with an old version.
Or use this that has also root and other improvements.
shewshain said:
Hi.
I have a problem with my D855. My phone is rooted and runs the fulmics ROM. Everything was working fine, , on Fulmics 5.3, except than one day, I was using my phone normally and then it crashed. I saw the phone rebooting, but for some reason it got stuck. The phone tried to boot unsuccessfully until the "firmware update" went through, after what it reboots again (unsuccessfully) and so on.
At that time, I was able to access twrp, do some backup, and flash properly with a downgraded version of fulmics (from 5.3 to 4.1).
It was able to boot again and use my phone like before. Yet, after one month of usage, the same problem happened on version 4.1. The phone crashed and now cannot boot.
Any idea of where it is coming from? Should I go back to stock? Should I contact customer service?
Click to expand...
Click to collapse
Same problem here. Normal usage suddenly started to reboot and now it's stuck in boot loop
Coming from Fulmics too - stopped working one fine day.
Now, continues to boot-loop at the initial LG screen. Trying to get into the recovery shows me the the 'Factory Reset' screen, but beyond that leads to boot-loops again. Even the Download mode loops!
I'm at my wits end without a solution in sight.
Blysterk said:
You can also use the Stock rom flashable from twrp. So you can wipe the system partition and get a "better situation" than a nandroid backup that should be with an old version.
Or use this that has also root and other improvements.
Click to expand...
Click to collapse
Thank you for this advice. I was able to update my stock ROM after the Nandroid backup through LGUP, but your method would have been faster.
But anyway, I am waiting to see if I am stuck with bootloops again, using non-root stock version, so I can send it to customer service if this happen again.
AhmadAlmousa said:
Same problem here. Normal usage suddenly started to reboot and now it's stuck in boot loop
Click to expand...
Click to collapse
abourdeau said:
I have the exact same problem, I even bought a second battery with no success.
Click to expand...
Click to collapse
Are you using Fulmics ROM as well? Can you have access to TWRP? I was able to connect to a PC in the recovery mode and to transfer files before flashing, in case you need some basic backup...
prakhargr8 said:
Coming from Fulmics too - stopped working one fine day.
Now, continues to boot-loop at the initial LG screen. Trying to get into the recovery shows me the the 'Factory Reset' screen, but beyond that leads to boot-loops again. Even the Download mode loops!
I'm at my wits end without a solution in sight.
Click to expand...
Click to collapse
Silly question, but are you sure that you selected "Yes" when the screen asks you about factory reset? you have to press "volume down" and the "power button", since the default answer is no.
shewshain said:
Silly question, but are you sure that you selected "Yes" when the screen asks you about factory reset? you have to press "volume down" and the "power button", since the default answer is no.
Click to expand...
Click to collapse
Yes, of course I was able to access TWRP successfully earlier.
Curiously enough, the phone boot-loops in regular startup, Download mode and trying to get to recovery. However, it doesn't restart itself and fall into a loop, while on the Factory Reset menu. Am I correct in assuming that the battery could not be the root cause of the overall problem? Because if it was, it would likely loop even on this Factory Reset menu as well as far as I understand.
Unfortunately, the phone restarts as soon as it lands in the Download mode so I cannot even restore to stock.
EDIT: Okay, weirdly enough it just booted and reached the homescreen before restarting again. What I did was let it charge to a 100% and tried booting while plugged in. Could it be the battery after all? Though this exact set of steps hasn't been helpful before.
Alright this is my first post here so I hope you'll bare with me. I'll give you the anecdotal account first and get any details that are needed when I get home from work, so here goes...
Friend of mine got a refurbished S3. Later we find she needs a newer firmware than the stock 4.3 to use pokemon go so I tell her I'll put cm13 on it and she'll be at 6.0 and it should run fine. In the process of trying to put cm13 on I find that the recovery error I'm getting is telling me that it's actually a sprint S3 even though the model number in the software and under the battery says sgh-t999. So I try the sprint cm13 file and it boots and seems to work fine. Weeks later we discover she hasn't been receiving calls. No notification, nothing. Everything else works, she has Internet, she can call out, she even gets voice-mail notifications if people leave them. This is no good, so I try to roll her back to stock (sgh-t999 stock) after trying some other simple fixes that didn't work. (just soft fixes not flashing anything weird) But next thing I know the phone is soft bricked and all the tuts I see just say to push this .tar or that .img and pass or fail the phone never boots and I haven't had any kind of recovery menu since the first flash. The counter is at 17 or some-****ing-thing. At this point I've tried both sprint and t-mobile roms just out of desperation but nothing has gotten me out of the softbrick. The download menu also identifies it as a sgh-t999.
I hope someone here can help. Best as I can remember that's everything besides any logs you guys want to see.
Download (i.e. Odin) mode is where the phone's "real" model # is located. Since it is a identified as an sgh-t999, you should be flashing TWRP and CM13 for the d2tmo: https://twrp.me/devices/samsunggalaxys3tmobile.html
Maybe try again with a fresh flash of TWRP and CM13?
Flashed TWRP and it passed on Odin but I can't get into the recovery using the usual method.
Reflash TWRP but uncheck everything in Odin except f reset time. After completing the TWRP flash, remove the USB cable from the phone, remove battery, replace battery, press home, volume up, and power to power up the phone. Once the phone starts to power up, release the power button but hold down home and volumue up.
No idea why it worked that time but I've got TWRP up again. Going to boot into CM13 if I can and see if it's receiving calls yet.
All working, thanks guy!