boot animation trouble shooting - Upgrading, Modifying and Unlocking

I was using rom tool box to change the boot animation on my note 2 which was working great until I got fat fingers
playing around one day and I ended up installing the boot animation fixer, Now on start up I have a blank screen.
Does anyone have a clue what might of happen.? Beside the point 1 noob = many problems

So I discover the easies solution to this problem is just reflash your rom , Just dirty flash your current rom again and your boot animation will be back in working order.
And no you wont lose your data unless you do a factory reset.

Related

[Q] Boot Animation

I have been racking my brain and almost destroying my phone trying to change the boot animation. I have stock ROM nothing different with the factor setting with the exception I have rooted the phone. A number of ROM and animation i have tried have said they are not compatible but I go to YouTube and see videos of flashing being done so I know its out there. Any suggestion on how to fix this problem.
The last animation I was trying to flash was the Android peeing on the apple logo.... That's a must have

[Q] Soft brick, neverending booting / boot loop. Am i doing this right?

Hi Guys.
So i flashed a few roms lately. started with EmotionMiUi then CM10, Omega, Alliance and well a few more.
i did a full wipe and cleared all caches each times and only had a few minor problems with the different ROMS that i was able to fix.
So i now returned to MiUi and have had it running for about a week. Tried some DPi modding yesterday, and did notice that it took longer time to boot and boot into recovery. i flashed the Xpose DPi remover, and continued using my phone. i have rebooted about 3 times today. And the last reboot caused the phone to enter the eternal "Samsung Galaxy Note II - N7100" boot static "animation".
Now i have tried pulling the battery several times, tried booting into recovery and the only thing that will let me boot into anything is power + home + volume down.
i have obtained the official samsung firmware ROM for my phone.
is my way ahead to "just" flash it using Odin, and i will have my good times back ?
Maybe try to clear Data and Cache partitions first?
mat9v said:
Maybe try to clear Data and Cache partitions first?
Click to expand...
Click to collapse
Just to clear you're stuck at the start screen( the screen it shows Note 2 and model number)?
If so, then i have no clue
If your phone goes in a bootloop ( startscreen then samsung logo animation, blank screen, start screen, samsung logo animation...) I have faced this issue while flashing Stock ROMs and you can clear this by doing a factory reset though i have no clue whether this is the correct one for MIUI ROM.
prabukannappan said:
Just to clear you're stuck at the start screen( the screen it shows Note 2 and model number)?
If so, then i have no clue
If your phone goes in a bootloop ( startscreen then samsung logo animation, blank screen, start screen, samsung logo animation...) I have faced this issue while flashing Stock ROMs and you can clear this by doing a factory reset though i have no clue whether this is the correct one for MIUI ROM.
Click to expand...
Click to collapse
i was stuck at the very first startscreen that just stayed there. i had been messing around with some DPi and a lot of tweaks.
i used Odin from my PC to flash the official firmware, then i used Philz recovery to format and clean before flashing my MiUi V5 ROM.
ALL works great.

Stuck at Samsung splash screen.

Hi,
I recently tried installing the new 4.3 update onto my Samsung Galaxy S3 I747. Also, I never rooted my phone and my carrier is Telus if that matters.
When my phone finished updating, it lead to the lock screen. Just as I was about to enter my pin and unlock it, the phone restarts and gets stuck on the Samsung splash screen. I have tried entering into recovery mode and then wiping the cache and restarting it, but no luck.
I do not wish to restore my phone back to factory settings because I do not want to lose my music and apps. Is there a solution that can fix it without wiping the memory?
Thanks.
edit: i left it charging for a few minutes while it was stuck on the samsung splash screen, and then it went to the lockscreen and restarted it self
... i have to wait five minutes before i can save my edit
editedit: it just went to lockscreen for a second again
editeditedit: its going back to lockscreen quite often and restarting it self
aznpiggy said:
Hi,
I recently tried installing the new 4.3 update onto my Samsung Galaxy S3 I747. Also, I never rooted my phone and my carrier is Telus if that matters.
When my phone finished updating, it lead to the lock screen. Just as I was about to enter my pin and unlock it, the phone restarts and gets stuck on the Samsung splash screen. I have tried entering into recovery mode and then wiping the cache and restarting it, but no luck.
I do not wish to restore my phone back to factory settings because I do not want to lose my music and apps. Is there a solution that can fix it without wiping the memory?
Thanks.
edit: i left it charging for a few minutes while it was stuck on the samsung splash screen, and then it went to the lockscreen and restarted it self
... i have to wait five minutes before i can save my edit
editedit: it just went to lockscreen for a second again
editeditedit: its going back to lockscreen quite often and restarting it self
Click to expand...
Click to collapse
When you got it into recovery did you try to wipe data/factory reset??
But to be honest it sounds like your phone is soft bricked maybe. I'm experiencing the almost same problem with my AT&T sgh-i747. Mine is stuck at the Samsung Galaxy S III screen and doesn't go any further than that at all.
You will most likely have to do that same thing I am doing which is reflashing android 4.3 via odin. It may work for you, I'm pretty sure it'll work for mine. Head over here and read this thread and see if this can help if not let me know and we'll come up with somethin else to help you fix your phone. (If I'm correct following this thread and flashing via odin will not erase and of your data.)
Your only other real option is to install the 4.3 MJ2 leak via heimdall. http://forum.xda-developers.com/show....php?t=2496425
Heimdall will flash odin files. http://glassechidna.com.au/heimdall But odin will not flash heimdall files. It works much like odin flash in download mode so i'm told. I'm trying to figure it out now. I hope this helps.
I was never able to get the above Heimdall installed correctly on my pc. I am still stuck at the black and white galaxy s3 screen. I installed TWRP via odin to try my to run my nandroid i made earlier today and it says successful. But when I go to reboot It says No OS are you sure you want to reboot. I was already on 4.3.3 via the OTA update like you. And now i'm here turn phone on and it's going straight to download mode
Please HELP US BOTH Someone ANYONE

Duplicate Samsung Epic 4g logo on boot after re-flash

Hey there. Something strange has been going on ever since I re-flashed my phone. When I flash the kernel/rom other than the stock one I get a duplicate Samsung logo when the phone boots. (phone displays Samsung logo, goes black for a second then displays again before boot) I've been flashing and reflashing ever since I got the phone and now I'm getting this. I can get into recovery and download mode just fine and other than that there don't seem to be any other problems. This is just weird. I'm wondering if there's a way to fix this. Also, I'm wondering how such a thing can happen in the first place. I've re-flashed twice now and the result is still the same.
[EDIT]
From what I understand, the boot screen file is located in param.lfs. I've read before that you can add a screen but how in the world would a re-flash cause a duplicate screen to appear? I had a failed kernal flash happen where i couldn't access the recovery and had to start over from scratch but that's happened before.
[UPDATE]
Just tried to mod the boot logo and found out it's requesting "gaudi_bootimage.jpg" twice. I have no idea what this means. Gonna go back in and re-flash the old one back in.

T-Mobile Galaxy Note 2 T889 to Android 6.0.1 Resurrection Remix Boot Loop

i followed this guide
teamandroid.com/2016/03/08/update-tmobile-galaxy-note-2-t889-android-601-resurrection-remix-marshmallow-custom-rom/2/
and it worked perfectly until yesterday
the other day i looked at my phone and it formatted and restarted on its own. i didnt really lose much.
so i accepted it and reset up all my apps and such, and then when my phone died and i charged it
it got stuck in boot loop forever
i tried wiping both cache and reboot recovery it skips boot loop long enough to load up but as soon as i see my homescreen for a second it boot loops again.
so then i tried completely formatting the phone over which worked until this morning when i woke up my phone was dead. swapped batteries and turned it on. booom boot loop again.
is there any advice on what i should do?
im able to format it and get it working again if something needs installed etc
but i want to stop this from happening again
Q: is it possible that a certain app i downloaded is forcing the boot loop? i dont see why it would because ive had all the same apps for months and it just happened out of no where.
i appreciate any help, id just like to know why in the world its happening, and what the best course of action would be
im thinking maybe restore it back to factory firmware and unrooting and starting the process all over again
i seen something for 7.1 would that be better?

Categories

Resources