OTA update? - Galaxy S 4 Mini Q&A, Help & Troubleshooting

My phone I9192 has just come up with an update which is about 214MB. Will this have KNOX in it and if I download it do I have to install it?

Rew64 said:
My phone I9192 has just come up with an update which is about 214MB. Will this have KNOX in it and if I download it do I have to install it?
Click to expand...
Click to collapse
What version u have now on phone ?

silviumik said:
what version u have now on phone ?
Click to expand...
Click to collapse
i9192xxuamf7 jdq39

Rew64 said:
i9192xxuamf7 jdq39
Click to expand...
Click to collapse
And what CSC code ?
But most likely u will get Knox if u update OTA Almost all countries got Knox bootloader firmwares by now
U can avoid it by flashing an modified firmware and removing Knox bootloader a small guide here http://forum.xda-developers.com/showthread.php?t=2549357

CSC is AFR
Thanks I've not installed it.

Related

[Q] Cant turn wifi on after flash firmware

So, i had root on my phone and i wanted to unroot my phone for i dont know why... After i found firmware for my phone (I am from Serbia, mobile network VIP) for Telenor network, evrything is ok (little long boot, but nvm) except my wifi, i cant turn it on... Any help?
Tnx.
vujkeraf said:
So, i had root on my phone and i wanted to unroot my phone for i dont know why... After i found firmware for my phone (I am from Serbia, mobile network VIP) for Telenor network, evrything is ok (little long boot, but nvm) except my wifi, i cant turn it on... Any help?
Tnx.
Click to expand...
Click to collapse
Modem did not upgrade
This has been discussed over and over again
Flash same firmware 2 3 times until Baseband will change then your Wifi will work
SilviuMik said:
Modem did not upgrade
This has been discussed over and over again
Flash same firmware 2 3 times until Baseband will change then your Wifi will work
Click to expand...
Click to collapse
I will try that now, but should my baseband version and build number be the same or that nvm?
Tnx.
vujkeraf said:
I will try that now, but should my baseband version and build number be the same or that nvm?
Tnx.
Click to expand...
Click to collapse
It should be the same yes
SilviuMik said:
It should be the same yes
Click to expand...
Click to collapse
I downloaded firmware form other network carrier, is that a problem?
vujkeraf said:
I downloaded firmware form other network carrier, is that a problem?
Click to expand...
Click to collapse
Usually no
Now depends what firmware u have now on your phone, if u already have knox, or what firmware did u download
SilviuMik said:
Usually no
Now depends what firmware u have now on your phone, if u already have knox, or what firmware did u download
Click to expand...
Click to collapse
Downloaded latest I dont think so that firmware have knox Sorry for being such anoying Can i try to flash modem with the same baseband version if this dont work out? I just wanted to unroot my phone, nothing else...
vujkeraf said:
Downloaded latest I dont think so that firmware have knox Sorry for being such anoying Can i try to flash modem with the same baseband version if this dont work out? I just wanted to unroot my phone, nothing else...
Click to expand...
Click to collapse
If u find only modem yes Or if u extract it and tar + md5 it and flash
U are not annoying but very vague ...
"Latest" means lot of stuff ...
U could say at least i have now this : xxxxxxx and i want to flash this version xxxxxxx
Find all the info what u have now with *#1234#
SilviuMik said:
If u find only modem yes Or if u extract it and tar + md5 it and flash
U are not annoying but very vague ...
"Latest" means lot of stuff ...
U could say at least i have now this : xxxxxxx and i want to flash this version xxxxxxx
Find all the info what u have now with *#1234#
Click to expand...
Click to collapse
Ap: ML4
CP: NA2
CSC: NA1
What is that?! I am not good with this...
Model: GT-I9195
Model name: Galaxy S4 mini LTE
Country: Serbia (Telenor)
PDA: I9195XXUBML4
Thats what i downloaded and flashed
vujkeraf said:
Ap: ML4
CP: NA2
CSC: NA1
What is that?! I am not good with this...
Model: GT-I9195
Model name: Galaxy S4 mini LTE
Country: Serbia (Telenor)
PDA: I9195XXUBML4
Thats what i downloaded and flashed
Click to expand...
Click to collapse
U have Knox active
Flash it again your baseband is still NA2 not ML4
SilviuMik said:
U have Knox active
Flash it again your baseband is still NA2 not ML4
Click to expand...
Click to collapse
Oh, ok, thanks. So, should i flash firmware or just modem? What do you recommend?
Modem i found here http://forum.xda-developers.com/showthread.php?t=2545784
Sorry again... :S
vujkeraf said:
Oh, ok, thanks. So, should i flash firmware or just modem? What do you recommend? Sorry again... :S
Click to expand...
Click to collapse
Full rom, easyer
SilviuMik said:
Full rom, easyer
Click to expand...
Click to collapse
Ok, i will try again and again. Do i have to unchek something like F Reset time or something? Hope its gonna work...
vujkeraf said:
Ok, i will try again and again. Do i have to unchek something like F Reset time or something? Hope its gonna work...
Click to expand...
Click to collapse
Usually 2 times same rom is enough
Don`t need to check/uncheck anything
SilviuMik said:
Usually 2 times same rom is enough
Don`t need to check/uncheck anything
Click to expand...
Click to collapse
Ok, thank you alot. Be online, will inform you what is happening
vujkeraf said:
Ok, thank you alot. Be online, will inform you what is happening
Click to expand...
Click to collapse
I am flashig it for the 3rd time now, hope it will go ok now... If not, any other help?!
SilviuMik said:
Usually 2 times same rom is enough
Don`t need to check/uncheck anything
Click to expand...
Click to collapse
Flashed 3 times and nothig Any other help?
vujkeraf said:
Flashed 3 times and nothig Any other help?
Click to expand...
Click to collapse
Odd !
Then try only modem then ....
SilviuMik said:
Odd !
Then try only modem then ....
Click to expand...
Click to collapse
Ok, i will, which one? ML4 or NA2?
vujkeraf said:
Ok, i will, which one? ML4 or NA2?
Click to expand...
Click to collapse
ML4

[SOLVED] Downgrade S4 mini (GT-I9195) v4.4.2 --> v4.2.2?

Kind XDA users,
As the topic implies, I'd like to downgrade this unrooted phone.
Could anyone direct me to a to a link with the proper firmware / procedure?
Will I be able to downgrade without tripping Knox?
Phone info:
Samsung Galaxy S4 Mini GT-I9195 (8GB)
Android version: 4.4.2
Baseband version: I9195XXUNCJ6
Buildnumber: KOT49H.I9195XXUCNJ6
Kernel version: 3.4.0-3093013
Perhaps I should also note why I'd like to downgrade:
For some reason the phone gives bad signal on GSM network.
It seems it is connected normally, though sometimes people reach te voicemail without any reason.
Also outgoing calls seem to fail at that time, reboot solves this temporary.
The option "GSM only" is not available under network settings.
I put the SIM-Card in another S4 Mini on v4.2.2 the option "GSM only" is available.
(I did not select it though as the plan has data, it was just the only difference I could find other than android version.)
Tested for approx 2 week and it runs fine, problems are yet to be discovered.
Edit: feel free to move this topic, did not notice I was in the general section.
Kind regards, Stefan.
Hi Stefan!
The only one option is flash ZTO-UBUBNE2 firmware(Brazil), It don't have much bloat, 90% have option to uninstall...
Good luck, MixoMaxoViper.
Thanks for the reply, could you link me to the file?
Can it be flashed with kies or only with odin?
Also will this trip Knox?
Kind regards, Stefan.
@up
http://samsung-updates.com/
Then search for I9195--->ZTU UBUBNE2
MixoMaxoViper said:
@up
http://samsung-updates.com/
Then search for I9195--->ZTU UBUBNE2
Click to expand...
Click to collapse
And for i9190?
Will this trip Knox and how is it flashed then?
Kind regards, Stefan.
Thaevil0ne said:
Will this trip Knox and how is it flashed then?
Kind regards, Stefan.
Click to expand...
Click to collapse
That rom is official samsung rom. So it will not trip knox. Extract the downloaded zip file and u get a "tar.md5" file along with a 'dll' file.
Open odin and click on PDA or AP button and choose the extracted tar.md5 file. Then flash it.
Krik88 said:
And for i9190?
Click to expand...
Click to collapse
This ZTO-UBUBNE2 rom is meant for GT-I9195. You must find a jellybean firmware with same bootloader as kitkat firmwares.
Then you can downgrade. I have i9195, so i do not know about any jellybean firmwares for I9190 that have knox 2.0 bootloader.
Thaevil0ne said:
Will this trip Knox and how is it flashed then?
Kind regards, Stefan.
Click to expand...
Click to collapse
No, KNOX will be still 0x0
Good luck!
MixoMaxoViper said:
@up
http://samsung-updates.com/
Then search for I9195--->ZTU UBUBNE2
Click to expand...
Click to collapse
Hi all,
Thanks a lot for pointing me in the right direction.
Firmware has been flashed without any problems.
Kind regards, Stefan.
sasank360 said:
That rom is official samsung rom. So it will not trip knox. Extract the downloaded zip file and u get a "tar.md5" file along with a 'dll' file.
Open odin and click on PDA or AP button and choose the extracted tar.md5 file. Then flash it.
Click to expand...
Click to collapse
Hi, my phone brand vodafone italy and I have upgrade to 4.4.2.
After flashing brasil firmware 4.2.2 it's possible flashing firmware 4.2.2 vodafone italy?
thank you
danio.78 said:
Hi, my phone brand vodafone italy and I have upgrade to 4.4.2.
After flashing brasil firmware 4.2.2 it's possible flashing firmware 4.2.2 vodafone italy?
thank you
Click to expand...
Click to collapse
Not unless you can put the bootloader from Brazilian rom to your Italian ROM but I think that would be break the knox and probably wouldn't even work anyway.
how we can know that ,which jellybean rom have the same bootloader as kitkat?(so we can downgrade)
i want it for i9190 and i9192
00ehsan00 said:
how we can know that ,which jellybean rom have the same bootloader as kitkat?(so we can downgrade)
i want it for i9190 and i9192
Click to expand...
Click to collapse
Don't think such a rom exists for those models just i9195. That's with the new boot loader. I may be wrong though...
Thaevil0ne said:
Will this trip Knox and how is it flashed then?
Kind regards, Stefan.
Click to expand...
Click to collapse
no this has the same bootloader from kitkat you will be able to flash this without problems!
---------- Post added at 02:58 PM ---------- Previous post was at 02:55 PM ----------
danio.78 said:
Hi, my phone brand vodafone italy and I have upgrade to 4.4.2.
After flashing brasil firmware 4.2.2 it's possible flashing firmware 4.2.2 vodafone italy?
thank you
Click to expand...
Click to collapse
no ONLY the ZTO 4.2.2 hast the v2 bootloader. other 4.2.2 will fail install and maybe trigger knox
bad news for us sniff sniff
---------- Post added at 03:46 PM ---------- Previous post was at 02:58 PM ----------
u can use this:
https://forum.xda-developers.com/showthread.php?t=2706880
this is touchwiz rom with cm like customization read it. only s4 mini lte (GT-I9195,serranoltexx)
sasank360 said:
That rom is official samsung rom. So it will not trip knox. Extract the downloaded zip file and u get a "tar.md5" file along with a 'dll' file.
Open odin and click on PDA or AP button and choose the extracted tar.md5 file. Then flash it.
This ZTO-UBUBNE2 rom is meant for GT-I9195. You must find a jellybean firmware with same bootloader as kitkat firmwares.
Then you can downgrade. I have i9195, so i do not know about any jellybean firmwares for I9190 that have knox 2.0 bootloader.
Click to expand...
Click to collapse
sir file not found what im going to use ? my phone is from finland can i use diffrent rom except for NEE(finland) region
I can't downgrade mine (GT-i9190), knox doesn't allow it

Marshmallow to Nougat!

I've a Galaxy A7 2017, and I have the warranty. So if i do an upgrade to 7.0 and then (if i've a problem) will I be able to downgrade to 6.0 in case I've to take my phone to the warranty?
Thanks
Aguss98 said:
I've a Galaxy A7 2017, and I have the warranty. So if i do an upgrade to 7.0 and then (if i've a problem) will I be able to downgrade to 6.0 in case I've to take my phone to the warranty?
Thanks
Click to expand...
Click to collapse
Yes.
You don't have to if you make the official upgrade...
edisso10018 said:
You don't have to if you make the official upgrade...
Click to expand...
Click to collapse
Yes i know. But the problem is that my carrier doesn't have the update yet!
i just suggest to wait for N of your country
Loulou-13 said:
i just suggest to wait for N of your country
Click to expand...
Click to collapse
Thanks! :good:
The problem is that i'll have to wait at least 5 months ?
Aguss98 said:
I've a Galaxy A7 2017, and I have the warranty. So if i do an upgrade to 7.0 and then (if i've a problem) will I be able to downgrade to 6.0 in case I've to take my phone to the warranty?
Thanks
Click to expand...
Click to collapse
Warranty will be fine. But just keep in mind that some firmwares flashed by odin will update the bootloader and you can.t go back to 6.0.1
MaDaLiNoSt said:
Warranty will be fine. But just keep in mind that some firmwares flashed by odin will update the bootloader and you can.t go back to 6.0.1
Click to expand...
Click to collapse
?? What do you mean?
Aguss98 said:
??
Click to expand...
Click to collapse
Once you flash a firmware with ,, .... U2....,, then the bootloader is updated, and you can.t go back to U1
MaDaLiNoSt said:
Once you flash a firmware with ,, .... U2....,, then the bootloader is updated, and you can.t go back to U1
Click to expand...
Click to collapse
Ooh ok!....I had another phone that has 6.0 and I can downgrade to 5.0 anytime I want. For that reason I asked ? thanks

please i need help about g960 firmware

hello , i have s9 from att 960u g960usqs4csc8 i want flash it with the unlock firmware i want have normal phone with ota update please help
no answer
Download and flash this one
G960U1UES4CSD4
ZeroXO said:
Download and flash this one
G960U1UES4CSD4
Click to expand...
Click to collapse
eesh, why such an old one? also sammobile.com/firmwares is where most folks get their firmwares from
Sorry posted same bl version but in case he want to update
G960U1UES6CSH8
hamza_iraki said:
hello , i have s9 from att 960u g960usqs4csc8 i want flash it with the unlock firmware i want have normal phone with ota update please help
Click to expand...
Click to collapse
Use sammfirm to download firmware faster.. sammobile takes ages
kpwnApps said:
Use sammfirm to download firmware faster.. sammobile takes ages
Click to expand...
Click to collapse
also the Frija tool works wonders! it does the exact same thing as SamFirm, but its just prettied up a bit
https://forum.xda-developers.com/s10-plus/how-to/tool-frija-samsung-firmware-downloader-t3910594
ZeroXO said:
Sorry posted same bl version but in case he want to update
G960U1UES6CSH8
Click to expand...
Click to collapse
no need ot be sorry. youre all good man
please i cant locate the lates firmware for my device please send me the link
My dear Hamza, ZeroXO, kpwnApps & Youdoofus have offered links & advice on how to obtain your firmware.
Either go here: https://updato.com or use Frija https://forum.xda-developers.com/s10-plus/how-to/tool-frija-samsung-firmware-downloader-t3910594
Good luck

GALAXY S10+ SM-G975U/U1 Can't Flashing lower SW Firmware

hi.yestarday i brought brand new g975u with preinstalled android 9 with no ota's couse i am not from usa and csc is for usa, so i test flashed other carrier branded csc firmware verizon (G975UOYN5GUBH) android 11 with sw 5 i cannot downgrading os (lower sw number ) i think couse locked/new bootloader how can i flash lower sw firmware need to flash correct firmware: g975u1 (usa/xaa)
G975U1OYM4FUA4
Why in the world would you even flash branded software, what's the reason to do that? What you can do is flash unbranded software with CSC of your choice. You won't be able to downgrade, ever.
Vatt`ghern said:
Why in the world would you even flash branded software, what's the reason to do that? What you can do is flash unbranded software with CSC of your choice. You won't be able to downgrade, ever.
Click to expand...
Click to collapse
My samsung s10 plus was unlocked before on android 9 when I got it, but when i flashed it with andriod 11 SPR firmware it became network locked. How do i fix this"? Please
Tallytune said:
My samsung s10 plus was unlocked before on android 9 when I got it, but when i flashed it with andriod 11 SPR firmware it became network locked. How do i fix this"? Please
Click to expand...
Click to collapse
try flashing an open carrier build with odin.
cheez3 said:
try flashing an open carrier build with odin.
Click to expand...
Click to collapse
What do you mean open carrier?
Tallytune said:
What do you mean open carrier?
Click to expand...
Click to collapse
A build not associated with a carrier.
ldeveraux said:
A build not associated with a carrier.
Click to expand...
Click to collapse
OK you mean I should use a Smg975u1 build on my Smg975u?
Tallytune said:
OK you mean I should use a Smg975u1 build on my Smg975u?
Click to expand...
Click to collapse
I'm not sugguesting anything! I'm just translating what was written.
ldeveraux said:
I'm not sugguesting anything! I'm just translating what was written.
Click to expand...
Click to collapse
I am new to all this and I am really troubled by this...anyways thanks
Tallytune said:
I am new to all this and I am really troubled by this...anyways thanks
Click to expand...
Click to collapse
Were you able to fix this?

Categories

Resources