[Q] Need Viper4Android - Galaxy S II Themes and Apps

i need viper4android for my galaxy s2, I am using MIUI v5 rom, when i install viper every time it says drivers are installed please reboot. when i reboot i find that no drivers installed. if i reopen viper it again says to install drivers....please help me asap what to do now...

vireshkumar26 said:
i need viper4android for my galaxy s2, I am using MIUI v5 rom, when i install viper every time it says drivers are installed please reboot. when i reboot i find that no drivers installed. if i reopen viper it again says to install drivers....please help me asap what to do now...
Click to expand...
Click to collapse
Ok

Related

Xposed Framework for One M8?

Anyone installed the Xposed Framework and got it working on an One M8 Rooted? Because tried to install it didn't work, the apk installs but when you try to do install/update it just reboots but the framework never installs???
Just install ARHD, it`s pretty much just an optimized stock rom, flash it, if you get a black screen at the end, hold vol up and power until reboot, initial boot may take 10mins, after that, install xposed through recovery method.
ryanjsoo said:
Just install ARHD, it`s pretty much just an optimized stock rom, flash it, if you get a black screen at the end, hold vol up and power until reboot, initial boot may take 10mins, after that, install xposed through recovery method.
Click to expand...
Click to collapse
Thanks I normally don't like using custom ROM's but as I like using xposed and if it's currently the only way to use it on the One m8 then maybe for the time being I will install ARHD, looking at the thread the feedback has been positive, again thanks for the heads up on flashing it.
I don't have an M8 but I'm lurking in the forums.
Try installing it with the recovery zip (available in 2.5).
I think S-On prevents /system from being written to
Sent from my C6903 using Tapatalk
With Xposed 2.5 you need to either
- Have a rom with system protection disabled
- Or choose to install via ZIP where it will copy an installer to your SDcard and you run it from recovery.
I am rooted on stock m8-
the easiest way to install xposed is by changing "install mode" under the framework tab to "Recvery (flash zip automatically". It'll do all the work for you, basically the way as described above.
You can also just flash a kernel with write protection turned off, and do it the old way.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
suprtrukr425 said:
You can also just flash a kernel with write protection turned off, and do it the old way.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
This is the simplest way to do it, imo.
Last night i installed toolbox 6, the updated version and for some reason, it corrupted my xposed framework. I got a message that said it wasn't installed. So i tried to install it via "classical mode" and my phone restarts without installing the framework. I was on ARHD 5.0 with elementalX 0.9 installed. I then tried:
1. Uninstall and reinstall xposed on classical method again, it rebooted and it didn't install
2. Changed method to recovery install and didn't install (Got message "cp:' can't open '/system/bin/app_process': Read-only file system"
E: Error in /cache/recovery/xposed-installer-Recovery.zip
3. Reinstalled ElementalX and tried again via classical and Recovery method and it didn't install
4. Dirty flash ROM and ElementalX and tried again via classical and Recovery method and it didn't install
What else can i tried instead of doing a full wipe install of the ROM??
BTW Xposed was installed and working fine until i installed the updated version of toolbox 6 , the alpha version was working great already
Xposed doesn't work with ART, make sure you are using dalvik
Hey Guys,
I have soff, unlocked but stock recovery... will the xposed installer be able to install it via the stock recovery? (automatically as you described before)?
thanks
No.
Does it give the ability to double tap and then the phone goes to sleep ?
Or you just use GPE.
I have the GPE RUU and Xposed works beautifully
SilentHunter316 said:
Does it give the ability to double tap and then the phone goes to sleep ?
Click to expand...
Click to collapse
Now yet. It does have gestures tho. I set mine to swipe down to go to sleep. Lots and lots of other goodies in ROM toolbox 6
I'm running stock s-off and root with xposed 2.6.1 and have not had any issues at all. Right now I'm only using sense 6 toolbox and greenify. I have only had two problems and don't believe them to be related. The first is the stock message app FC on voicemail and the second was a soft brick related to freezing Blink Feed.
I installed Xposed from my sdcard as well as sense 6. Didn't run into anything. Double check as above stated and make sure you are no using ART and also check about your unknown sources. I also have USB Debugging on as well not sure it that will matter or not but helps if you use TB or Rom Toolbox.
EDIT: You really need to look into a custom recovery, I use philz and love it. Having root and S-off but not using a custom recovery is kinda like owning a Ferrari but you can't drive a stick.
I have rooted One m8 with TWRP recovery, but it's still s-on, does xposed work also on s-on smartphone?
aluli95 said:
I have rooted One m8 with TWRP recovery, but it's still s-on, does xposed work also on s-on smartphone?
Click to expand...
Click to collapse
Of course it will work.It has nothing to do with s-on or s-off.Remember with s-on you can change kernel and recovery partitions but with s-off you can do more like changing radio etc
some on help me HTC one M8
do any one hv any solution for this problem....
i tried many times.... but not abel to solve the problem.....
plz some one guide me what shall i do to solve this problem....
i hv already installed the Xposed Framework Installer (Flashable Zip) file v2.4.1
also updated under xposed installer many time but still this error coming n not abel to use it fully...
advance thanks for any one who could help me...
i tries so many times but all time i got the same msg attached screenshot..plz plz help
htc one m8
ROM - Android Revolution HD 8.1
chetan hingrajiya said:
do any one hv any solution for this problem....
i tried many times.... but not abel to solve the problem.....
plz some one guide me what shall i do to solve this problem....
i hv already installed the Xposed Framework Installer (Flashable Zip) file v2.4.1
also updated under xposed installer many time but still this error coming n not abel to use it fully...
advance thanks for any one who could help me...
i tries so many times but all time i got the same msg attached screenshot..plz plz help
htc one m8
ROM - Android Revolution HD 8.1
Click to expand...
Click to collapse
change installation mode to recovery

viper won't install

Hello folks
I have a d850 at&t and cannot get viper audio to install. I have tried moving it to system and also tried using lucky patcher to no avail- every time I reboot and open the program it asks me to reinstall drivers. Is there a secret method I'm missing?
Did you install busybox? You need busybox
KingOfDope said:
Did you install busybox? You need busybox
Click to expand...
Click to collapse
Yes I have the stericsson bb
Okey delete/uninstall viper
reinstall busybox
reboot
Download this VIPER
install the 4.4.x version (FX) .apk file
Install drivers
reboot
succes?
:good:
KingOfDope said:
Okey delete/uninstall viper
reinstall busybox
reboot
Download this VIPER
install the 4.4.x version (FX) .apk file
Install drivers
reboot
succes?
:good:
Click to expand...
Click to collapse
Yes sir that's what I did before. Did it again just to be safe and the same result. It wants to reinstall the drivers again. Do I need to make it a system app then install?
jkieffer46 said:
Yes sir that's what I did before. Did it again just to be safe and the same result. It wants to reinstall the drivers again. Do I need to make it a system app then install?
Click to expand...
Click to collapse
huhmm really weird. I can't help you then
by the way viper4android doesn't need to be a system app

Viper4Android FX not working in Micromax canvas A1( Aq4501)

I recently installed CM12.1 after rooting my canvas a1. But when i am opening viper4Android after installing it from play store, it asks for driver installation and completes to ask for reboot. And after reboot this process is happening same continuosly. I have already installed BUSYBOX.
Please help.
Download selinux mode changer (google it) and change selinux to permissive
That will solve the problem
hp5942 said:
Download selinux mode changer (google it) and change selinux to permissive
That will solve the problem
Click to expand...
Click to collapse
i tried that already and it hadn't worked. after that my audioFX was closing forcely repeatedly.. i had to flash cm12.1 rom again.
madhurajkumar said:
i tried that already and it hadn't worked. after that my audioFX was closing forcely repeatedly.. i had to flash cm12.1 rom again.
Click to expand...
Click to collapse
V4A was working fine on my CM12.1. Try downloading from official website instead of Playstore
http://vipersaudio.com/blog/?page_id=48
Dont forget to press Thanks if that helped
hp5942 said:
V4A was working fine on my CM12.1. Try downloading from official website instead of Playstore
Dont forget to press Thanks if that helped
Click to expand...
Click to collapse
Tried again but it still asks to install driver after many reboots(reboots because it says that driver has installed.)
madhurajkumar said:
Tried again but it still asks to install driver after many reboots(reboots because it says that driver has installed.)
Click to expand...
Click to collapse
Try flashing this zip
http://forum.xda-developers.com/attachment.php?attachmentid=3431648&d=1438967541
Fixed
That worked really! Thanku very much

How do you install viper4android?

I had a S6, and with every custom rom, I just installed the apk, installed the driver, rebooted and there, it worked.
But with this phone every custom rom I try doesn't seem to install the driver, instead it asks to install the driver again.
I have changed the kernel SELinux setting and I get the same error? Has anyone got viper to work and on what rom??
Rekan_ said:
I had a S6, and with every custom rom, I just installed the apk, installed the driver, rebooted and there, it worked.
But with this phone every custom rom I try doesn't seem to install the driver, instead it asks to install the driver again.
I have changed the kernel SELinux setting and I get the same error? Has anyone got viper to work and on what rom??
Click to expand...
Click to collapse
I am stock, rooted on the latest Marshmallow build and have flashed the attached file through TWRP with great success. Drivers loaded just fine and audio quality is awesome.
Good luck!
I use Viper atmos sony and beats edition and it works well. I'm using Chroma and ElementalX.
You can try with the flashable zip here http://forum.xda-developers.com/nexus-6/themes-apps/viper4android-t2952137

Anyone get Viper4Android to Work on Q?

Before I go back to 9.0.0, i figured i would ask....
Anyone get Viper4Android to install properly on Q?
I tried the latest Viper Magisk Module v1.4.2 i think... Magisk completed the installation but after reboot, Viper is requiring Drivers to be installed. So i install the Drivers, which took longer then normal, reboot and BAM! Viper needs to install Drivers on your device.
So Q doesnt seem to wanna play well with the Viper drivers.
And i tried installing Busybox for ****s and giggles and install fails in Magisk....
Thanks in advance for any assistance and/or **** head comments,
T
HACK3DANDR0ID said:
Before I go back to 9.0.0, i figured i would ask....
Anyone get Viper4Android to install properly on Q?
I tried the latest Viper Magisk Module v1.4.2 i think... Magisk completed the installation but after reboot, Viper is requiring Drivers to be installed. So i install the Drivers, which took longer then normal, reboot and BAM! Viper needs to install Drivers on your device.
So Q doesnt seem to wanna play well with the Viper drivers.
And i tried installing Busybox for ****s and giggles and install fails in Magisk....
Thanks in advance for any assistance and/or **** head comments,
T
Click to expand...
Click to collapse
Try using this viper apk, it generates a magisk module when you reboot the phone. In the latest update post, OP says:
The compatibility mode switch has been added back. This seems to be mandatory for car mode and some android q builds.
Click to expand...
Click to collapse
Worth a try
TENN3R said:
Try using this viper apk, it generates a magisk module when you reboot the phone. In the latest update post, OP says:
Worth a try
Click to expand...
Click to collapse
Yea thanks for trying but no go. The apk did install the Magisk Module, Drivers took 2-3 times but finally took. Driver Status is all NOs and Unsupported Sometime soon i'm sure...

Categories

Resources