Develop Bugs

New Zopo Zp700

New Zopo zp700​
This is new thread of Zopo Zp 700 Quad core !
In this new section of ZOPO 700 we will discuss:
Android system
Firmware upgrade
Custom firmware.
Everybody are Welcome!​
MANY THANKS TO OUR MODERATORS TO OPEN AGAIN THIS THREAD !
More attention to the Xda-developers Rules:
http://forum.xda-developers.com/announcement.php?f=256
Many thanks to "SUPER ADMIN" MR. MIKE​

Details section​
ZOPO ZP700 has 4.7 inch 960*540 pixel QHD screen, with MTK MT6582 quad-core processor, 1.3Ghz 1GB RAM, 4GB ROM, and 5MP rear camera, installed Android 4.2 OS.
ZOPO ZP700 4.7-inch QHD Screen Quad Core MTK MT6582 3G Android Phone
- 4.7 inch multi-touch screen
- MTK MT6582 Quad-Core ARMv7 Processor, 1.3GHz
- GPU: ARM mali400-MP2 500Mhz
- Android 4.2 os Jelly Bean
- Dual SIM card dual standby, WCDMA/GSM+GMS network
- Support 3G WCDMA (HSDPA) network
- 8.0MP back, 5.0MP front camera, with LED flashlight
Specifications:
BRAND and MODEL
Brand: ZOPO
Model: ZP700
Carrier: Unlocked
Sim card: Dual sim dual standby
Multi-Language: Afrikaans, Amharic, Bahasa Indonesia, Bhasa Melayu, Catala, Cestina, Dansk, Deutsch, English, Spanish, Filipino, French, Hrvatski, IsiZuzu, Italia, kiswahili, Latviesu, Lietuviu, Magyar, Nederlands, Norsk Bokmal, Polski, Portuguese, Romana, Rumantsch, Slovencina, Slovenscina, Suomi, Svenska, Swahili, Tagalog, Tieng Viet, Turkish, Zulu, Greek, Bulgarian, Russian, Serbian, Ukrainian, Hebrew, Urdu, Arabic, Persian, Hindi, Bengali, Thailand, Korean,Japanese
OS and CPU
Operating System: Google Android 4.2 Jelly Bean OS
CPU: MTK MT6582 1.3GHz, Cortex-A7 quad-core process
GPU:ARM mali400-MP2 500Mhz
NETWORKING
Dual sim dual standby, WCDMA/GSM+GSM
2G: GSM 850/900/1800/1900 MHz
3G: WCDMA 2100 MHz
Data Technology: GPRS, Edge, HSPDA, HSDPA
http://maps.mobileworldlive.com
CAMERA and VIDEO
Rear camera: 8MP, AF, LED Flash
Front-facing cam: 5MP
Video capture: 720P(1280*720, 30FPS)
Video Play：720P(1280*720, 30FPS)

ENTERNAINMENT
Video play formats: MP4/3GP/MOV/MPEG/MKV/FLV, ...
Audio play formats: MP3/AMR/AAC/ASF/Ape/Flac ,...
Ring Tone: MP3/AAC/ASF,...
icture formats: JPEG/PNG/GIF/BMP,...
CONNECITIVITY and COMMUNICATION
USB support: Micro USB v2.0 
WiFi:Wi-Fi IEEE 802.11 b/g/n
Synchronization via Exchange ActiveSync
WebKit web browser with zoom
Bluetooth technology: Bluetooth v4.0
VPN
GPS satellites: GPS,A-GPS
Sensor: Gravity Sensor, Compass, proximity sensor
DISPLAY
Screen Size: 4.7-inch
Color Support: 16 Million Colors
Screen Technology: IPS TFT Multi-touch capacitive Screen
Display resolution: QHD 960*540 pixels
RE-LOADED APPLICATIONS
Google Maps
Google Talk
Google Mail
Google CalendarGoogle Play Store
Documents to go
MEMORY
Internal phone storage: 4GBMB EMMC
RAM: 1GB
Memory card support : MicroSD Card up to 64gb
BATTERY
Battery li-Polymer, 1750mAh
Standby time: 100-150 hours
SIZE
Dimensions: 135.5×68.0×9.5mm
Weight:180±2g（include battery）
Color: Black, White, Blue, Pink, Yellow

Video and Photos section​
In all those vides show the procedure,the several type and details of the phones !
Not be considered spam or advertising.​

Software section:
New Firmware 01/04/2014 ( zp700 20140104-161011 ) :
http://aw53p6cmcg.l29.yunpan.cn/lk/QzgGSSnELHA8q
Firmware 12.12.2013 ( zp700 20131212-161011 ) ( pre-installed SuperUser not working at 100 %):
http://awrv65udef.l29.yunpan.cn/lk/QDAUa3v3yu2P7
or quick link :
http://d-h.st/SoI
Modded Recovery cwm 5504 :
http://d-h.st/wbT
superuser :
download from Market
Root :
http://www.mediafire.com/download/v3e3mtgxp1khlar/VRoot_1.6.0.3690_Setup.exe
Mtkdroidtools :
http://www.4shared.com/rar/SIZQYYL3/MtkDroidTools_v242.html
Flashtools v 3.1316.0.150 :
http://www.4shared.com/zip/RHJJa1Qx/sp_flash_tool_exe_v313160150.html
Primary partition 2.5 gb (Max impossible zp700 )
http://d-h.st/zrb
Thread partitions
http://forum.xda-developers.com/showthread.php?t=2455850&nocache=1
Let me know if the links work forever!
Firmware Setup :
Procedure :
1) Installing the New Firmware 04/01/2014
To download the new firmware and it will not have 'more' superuser preinstalled that did not work perfectly.
Do unzip the compressed file and insert into the firmware folder:
a) recovery amended
b) Ebr1 and 2 to increase the primary partition up to 2.5 GB
Phone off without usb cable and possibly removed the battery and put back for a perfect reset .....
and hold mode 'of off without usb cable connected!
Run Flashtool ..... select the file, and then scatter firmware upgrade ...... NOW ONLY CONNECT USB CABLE not before!
Wait for the end of the installation procedure of the firmware and eventually restart the phone!
This' whole simplified procedure for installing the original firmware.

Utility section​
SuperUser Installation
Attention to have the rights of Root " Complete 100% " of this terminal , carefully follow the guide .
I submit that all major programs such as :
and root framaroot , smartroot , Srsroot , or simple old procedure of installing supersu to recovery
DO NOT WORK , or better work but do not mount the file system read-write !
I found that the installation was done at 50% , the file system resulted only mode ' read only !
On the original firmware
On this model 'already ' installed an application (hidden) type SuperUser does not work perfectly
(The file system is not mounted mode ' read / write) .
It should then follow the guide to reinstall the NEW firmware without the super user of the Zopo
PROCEDURE
Among the many tests I've done the following program gave the best results but not ' been easy at all !
Only after installing the new firmware 1.4.2014 ( without superuser version of zopo )
1 ) Install the program on your pc VRoot :
2 ) Wait for it to update to version more ' recently and do root!
3) Connect your phone with the USB cable to the PC ... and wait for the answers on the monitor of the zp700
4) Make the root ... the phone will reboot ' .
5 ) Back in android .. you have to go on the market and unloading of SUPERSU
6) On launch Super autorizzatelo and if he wants to update via cwm binary On / TWRP .
7) Super rilanciatelo still up and you say ' that needs to be updated binary On autorizzatelo and say Cwm / TWRP
At this point your phone will reboot ' in cwm .. let him make up his return to Android !
8 ) Make sure that there is a shield appeared blue with a mechanical wheel in the middle !
The program has all in Chinese but it works perfectly!
( for the time being and ' the only one that allows you to have a superuser root and a fully functional )
ADVANCED MENU '
To take the advanced menu ' go to Settings ... About Phone ... click and go more' Buid number of times ,
If there is any problem please let me know .
post scriptum
Whenever you need to get into CWM recovery you can ' re-
The old procedure ( power button ) + ( volume +) ) now seems to reoperation on Zopo ZP700
Bye​

ghost45 said:
Software section​
Last firmware of the: 12-12-2013 :
http://awrv65udef.l29.yunpan.cn/lk/QDAUa3v3yu2P7
Click to expand...
Click to collapse
Could somebody please upload the firmware somewhere else, my download is supposed to take 20 hours
Thanks :good:

Does anybody know what these "hidden" settings are about?

ColonelZap said:
Does anybody know what these "hidden" settings are about?
Click to expand...
Click to collapse
i have the same question.my friend.

New Photos are uploaded!
bye:good:

Soon Very Soon NEW ROM v.1 By Ghost45
:laugh::laugh::laugh::good::good:

This hidden apps are described from my screenshots!
Sent from my GT-I9505 using xda app-developers app

Thanks v much for the tools/utilities for the zp700. Very useful, when I get the phone in a couple of weeks.
If possible, could you post the dimensions of zp700 battery, so I can look for a cheap 2nd battery.

Zopo zp700
Hello,
Sorry for my very bad English. I see here the Zopo zp700 have a 5 mpx and a 8 mpx camera but on many sites, the Zopo zp700 have a 5 mpx external camera and a 2 mpx front face camera. Two versions of this phone, that's the question.

Miui for zopo
I have MIUI v5 For ZOPO ZP700, anyone interested ? nobody have ^^ cool fact is.. i dont have this phone but i have rom

Well, post the link to download it...
Thanks
TeusFrom said:
I have MIUI v5 For ZOPO ZP700, anyone interested ? nobody have ^^ cool fact is.. i dont have this phone but i have rom
Click to expand...
Click to collapse

u`re welcome, but i dont have any changelog... for test, we wait for feedback, maybe later i could be add 3-4 others rom with touchwiz 5.0 and others UI..:
https://mega.co.nz/#!6F5CDYRT!YSu38k4LuEM-W19yWgQcHkpCK-FazdKEGGEXvm5bX4U

berlin51 said:
Thanks v much for the tools/utilities for the zp700. Very useful, when I get the phone in a couple of weeks.
If possible, could you post the dimensions of zp700 battery, so I can look for a cheap 2nd battery.
Click to expand...
Click to collapse
Yep, I need to know if the battery is like another one. I wish one of 2500 mha or more, someone know where can I find one?

I got the zp700 phone today.....seems to be very good, as outlined & expected by the specs, & it picked up the apps OK from my other Zopo, from a Titanium Backup on the SD card.
Battery is holding up well, although I cannot tell until I use the fone as I normally do, in a day or two.
I will get the calipers from my workshop on Sunday & get exact millimeter dimensions; in the mean time, the best measurements with a ruler are: width 56mm, height 65mm & 4mm thickness. So very thin; I guess a hi-capacity battery will be thicker than 4mm.
Battery size checked with calipers, & its: 56 * 66 * 4

ricadoflob said:
Yep, I need to know if the battery is like another one. I wish one of 2500 mha or more, someone know where can I find one?
Click to expand...
Click to collapse
you can search the battery from ebay or amazon. almost all the batteries are made in china.
Sent from my Windows 8 device using Board Express

how i can install miui rom please
thkx

Zopo ZP980 Plus Octa Core

This is new Thread of Zopo ZP980 Plus Octa Core​
MANY THANKS TO OUR MODERATOR TO GIVE US TO DISCUSS ON THIS PHONE !
More attention to the Xda-developers Rules:
http://forum.xda-developers.com/announcement.php?f=256
Many thanks to "SUPER ADMIN" MR. MIKE​

Details Section​
BRAND and MODEL
Brand: ZOPO
Model: ZP980+
Carrier: Unlocked
Certificate：CE, RoHS
Sim card: Dual sim dual standby
OS and CPU
Operating System: Google Android 4.2 Jelly Bean OS,
CPU: MTK MT6592 1.7GHz, Cortex-A7 Octa core process
GPU:Mali-450 MP4
NETWORKING
Dual sim dual standby, WCDMAGSM+GSM Sim1 Mini Card,Sim2 Normal Size View picture
2G: GSM 850/900/1800/1900 MHz
3G: WCDMA 850/2100 MHz
Network speeds: HSDPA 42.2Mbps，HSUPA 11.5Mbps
Data Technology: GPRS、EDGE、HSPA、HSPA+
Check here your sim provider http://maps.mobileworldlive.com
CAMERA and VIDEO
Rear camera: 14MP, AF, LED Flash
Front-facing cam: 5.0MP
Video capture: 1080P(1920*1080, 30FPS)
Video Play：MPEG-4 [email protected]，Or @15fps,16Mbps
ENTERNAINMENT
Video play formats: MP4/3GP/MOV/MPEG/MKV/FLV, ...
Audio play formats: MP3/AMR/AAC/ASF/Ape/Flac ,...
Ring Tone: MP3/AAC/ASF,...
Picture formats: JPEG/PNG/GIF/BMP,...
CONNECITIVITY and COMMUNICATION
USB support: Micro USB v2.0 
WiFi:Wi-Fi IEEE 802.11 b/g/n
WiFi Hotspot functionality, Tethering & portable hotspot - Synchronization via Exchange ActiveSync
Bluetooth technology: Bluetooth v4.0
VPN
GPS satellites: GPS,A-GPS -Sensor: Gravity Sensor, Compass, proximity sensor

DISPLAY
Screen Size: 5-inch
Contrast: 1000:1
Color Support: 16 Million Colors
Screen Technology: LTPS，2.47mm Narrow Frame
Screen material: TFT
Display resolution: FHD Super Retina Display 1920*1080 pixels, 441PPI, OGS
PRE-LOADED APPLICATIONS
Google Maps
Google Talk
Google Mail
Google Calendar
Google Play Store
Facebook
Twitter
Skype
Deleted all Chinese APP English Version
MEMORY
Internal phone storage: 16B ROM
RAM: 1GB
Memory card support : MicroSD Card up to 64gb
BATTERY
Battery:Li-Polymer, 2000mAh
Standby time: 130-200 hours
SIZE
Dimensions: 143.3 x 70 x 8.5mm
Weight: Phone:150g(with 1 Battery)

Software Section​
Drivers for windows :​
https://www.dropbox.com/s/125r5twipmdt1wn/MT6589 drivers.zip
http://www.4shared.com/zip/Y_F6KBCe/...sb_driver.html
http://www.4shared.com/rar/5wokI0ev/...NDROID__B.html
http://www.4shared.com/zip/dSb69w17/Copy_of_Driver.html
http://www.4shared.com/rar/qM8hDW5u/zopo_usb_drivers.html
http://ge.tt/2yL21VT/v/2
New firmware new version of Jellybean for zp980+ for flashtool
with new compatibility with octa core for Facebook and others new apps on the market:
ZP980+_20140618-154923
http://www.4shared.com/rar/jxW50tr0ce/ZP980_20140618-154923.html
New Firmware Kitkat O.S. ZP980+ 20141018-172927 :​
http://www.4shared.com/rar/9FBMcxnKba/ZP980_20141018-172927.html
New Firmware 06-01-2014 (zp980+ 20140106-):​
http://www.4shared.com/rar/o7F5TeGkba/ZP980_zopomobileshop_140106.html
boot patched
http://www.4shared.com/file/YoFgDaugce/boot_img_ZP980patched_140125-1.html
Recovery Modded :​cwm 5504 small font
http://www.4shared.com/file/vZdJiolHce/ZP980_cwm5504.html
twrp 2500 touch
http://www.4shared.com/file/w2w1F9-wce/recoverytwrp2500.html
cwm 6030 (Perfect and raccomanded)
http://www.4shared.com/file/Wl5Zur7tba/recovery_6030_zp980.html
Root​
http://www.4shared.com/file/DA8MSemkba/VRoot_1603690_Setup.html
supersu vers 1.91
http://www.4shared.com/zip/Soks3l28ba/UPDATE-SuperSU-v191.html
Mtkdroidtools:​242
http://www.4shared.com/rar/SIZQYYL3/MtkDroidTools_v242.html
253
http://www.4shared.com/file/CYuy3V38ba/MtkDroidTools_v253.html
Flashtools v 3.1316.0.212 (raccomanded version for octa core from Zopo staff):
http://www.4shared.com/zip/Ag4aK-rOce/SP_Flash_Tool_exe_v313440212.html
Flashtools v 5.xxxxxxx ( first new version):
http://www.4shared.com/zip/nZZOwTyuce/SP_Flash_Tool.html
Primary Partition 4 -> 7 gb
Raccomanded 7gb
http://forum.xda-developers.com/showthread.php?p=49808465
Ask to me if the link don't run!

Video Section​
Utility Section​
Cover Change:
To recognize the flip cover opening and closing I would recommend smart cover lite ...this app:
It has so many settings ..... I set the time of closing of the flip cover to 6 seconds after it closed but your own if you want to decide others details!
(vover to recognize the need to insert a small felt pad on the top right of the cover (to use the sensor).

Software Installation Section:​
Software Installation Section:
Drivers Installation:
Procedure:
To install the USB drivers VCOM the phone must be turned off and connected to the PC with or without a battery depending on the type of device,
get a screen like this in the device manager of the computer
Once you have installed the terminal will be shown in this way (the COM port may be different)
For those who have problems with the installation of these drivers and have had in the past a terminal mtk
they may have a driver conflict, or even if you just do the casino and installed it different,
to solve, you can try to use the program
USBDeview:
http://www.nirsoft.net/utils/trans/usbdeview_italian.zip
select all items in that report as VCOM USB Preloader in the Mediatek figure right click Unistall and restart the PC.
Firmware setup:
PROCEDURE
1) Installation of new Firmware of the 06-01-2014
To download the new firmware.
Do unzip the compressed file and insert into the firmware folder:
a) recovery amended
b) Ebr1 and 2 to increase the primary partition to 10gb
suggested 7gb
http://forum.xda-developers.com/showthread.php?t=2455850
Phone off without usb cable and possibly removed the battery and put back for a perfect reset .....
and hold mode 'of off without usb cable connected!
Run Flashtool version octa-core ..... select the file, and then scatter firmware upgrade ...... NOW ONLY CONNECT USB CABLE not before!
Wait for the end of the installation procedure of the firmware and eventually restart the phone!
This is whole simplified procedure for installing the original firmware
Section Root​
1°) PROCEDURE with (SuperSu)
( Prerequisite )
Install the new firmware in advance of 01/06/2014 if you have not already ' patched or fleshate boot with the boot patched .
( prerequisite to understand if you have a clean system 'that has to go out the base language and that ' English )
If you do not have English as the base language head to recovery ( recommended cwm 6030 )
before you do a full firmware flesh total wipe and wipe cache davil )
Having had access to the Android system :
1 ) enable the menu ' settings:
a) menu ' security enable unknown sources ;
b ) menu ' enable developer ,
USB debugging ;
mock locations .
Connect the USB cable and copied to the external memory (Micro SD)
in root ( no folders ) of the same file updatesupersu versXX.zip .
Restart mode ' recovery using:
1 ) the program mtkdroid tools on the front page ,
2 ) the unique method still works but more ' long . :
Turn off the phone and connect the USB cable to recharge the battery,
wait until the little red light charging lights (important)
now you can with the simultaneous pressure of the fingers on the keys:
Power + volume + lever
and wait without removing pressing keys ... that the phone reboots mode ' recovery.
At this point select install zip file and select super user and run it .
Restarting will have root on the phone!
( If you restart there is no ' app Super Upon repeat paying attention to the language of the firmware and that ' an important signal that it makes you realize that the system is ' clean and that there were traces of other changes in your phone)
2°) PROCEDURE with (Vroot)
Among the many tests I've done the following program gave the best results.
Install the new firmware in advance of 06/01/2014 if you have not already 'patched or flesh boot with the boot patched.
1) Install the program on your pc VRoot:
2) Wait for it to update to version more 'recently and do root!
3) Connect your phone with the USB cable to the PC ... and wait for the answers on the monitor of the zp980 +
4) Make the root ... the phone will reboot '.
5) Back in android .... check if everything is' in place
6) Check that there is a shield appeared blue with a mechanical wheel in the middle!
The program has all in Chinese but it works perfectly!
(for the moment Vroot and 'the only one that allows you to have a superuser root and a fully functional)!

does this mean you're waiting for the phone to arrive?

I don't understand why they don't add a few more HSPA bands to these phones...
I mean, every phone I see is either 850/2100 or 900/2100, or AT BEST AND VERY SELDOM 850/900/2100.
Having a quad-core ZP980 2/32GB (it has 850/2100 HSPA), I regret the lack of 900 MHz 3G and won't consider this octa-core one for this reason.

Hey guys - what ROM do you use for the phone?
I currently operate with MIUI v5 4.3.1 (ported from 998) and despite a few bugs works fine - not so happy about battery life still but a brand new device so it will need to settle a bit I guess.
zp980+ 2gb/16rom

wbgenetic said:
Hey guys - what ROM do you use for the phone?
I currently operate with MIUI v5 4.3.1 (ported from 998) and despite a few bugs works fine - not so happy about battery life still but a brand new device so it will need to settle a bit I guess.
zp980+ 2gb/16rom
Click to expand...
Click to collapse
I would love to get a Miui port for my ZP980+ octa core device.
i tried a port from needrom but whatsapp wasn't working.
but i did see a working version of MIUI on the ZP998 device!
Who can port that to the ZP980+ ? please?
Regards,
An desperate ex-MIUI user Addict

Recovery TWRP 2.7.0.0 for ZOPO ZP980+ by SevenMaxs
I put TWRP 2.7 for this phone site needrom.com/mobile/recovery-twrp-2-7-0-0-for-zopo-zp980/

New firmware new version of Jellybean for zp980+ for flashtool
with new compatibility with octa core for Facebook and others new apps on the market:
ZP980+_20140618-154923
http://www.4shared.com/rar/jxW50tr0ce/ZP980_20140618-154923.html

rom miui
hola, gracias por vuestro trabajo, no hay ninguna rom miui, 100% funcional, salen todos los dias para todos los zopo pero para este modelo octacore, 2 gb de ram no, alguna idea?
saludos.

NEW OPERATIVE SYSTEM "KITKAT" IS ARRIVEd ALSO FOR ZP980+
The new Operative System KITKAT is relased for zp980+ !!!!!
​
FINALLY KITKAT ON ZP 980+ IS ARRIVED
ZP980+_20141018-172927.rar
LINK:
http://www.4shared.com/rar/9FBMcxnKba/ZP980_20141018-172927.html

Hello,
the new KitKat for ZP980+ works fine... but... theres no root
anone here who find a way to root that rom?
i tryed vroot, framaroot ant towelroot... nothing works
thnx

HMME said:
Hello,
the new KitKat for ZP980+ works fine... but... theres no root
anone here who find a way to root that rom?
i tryed vroot, framaroot ant towelroot... nothing works
thnx
Click to expand...
Click to collapse
try this one, is rooted and works fine.
http://www.zopomobile.es/soporte/forum/viewtopic.php?f=30&t=517

Thnx,
but i found my own way to root the original rom.
my english is to bad to write it down :cyclops:.
Micha

In the official forum... Zopoxxxxxxxxp. Com there are my last Rom version n2 based kitkat O. S. With root and many of my tricks!
Sent from my GT-I9505 using XDA Free mobile app

[Root / Recovery / ROM] ZTE N909 / N909D

I own a ZTE N909D. Because there is not much data available in the English forums I want to gather everything I found out in this one thread.
Basic specs
Screen size: 4.5"
Screen resolution: 854 x 480 pixel
Processor: Qualcomm MSM8625Q (Arm v7)
Original Android version: 4.1.2
N909: single SIM / N909D: dual SIM
Root
In the past I used vRoot, which nowadays is called iRoot - I did not find any correlation to the i-products so far There is also an apk-file available, thus, you do not need a PC for rooting. What I did not like is the Chinese superuser-app. That one can be replaced with whatever you like (don't forget to uninstall the Chinese afterwards).
Searching through the (Chinese) forums I came across a few recoveries, which are working on my D-version, although they were created for the single SIM variant:
Recoveries
CWM v6.5.0.1:
Language: Chinese
Original compilation by ???: I am sorry, I lost the original link. I only have the IMG-file (download link below).
TWRP v2.5.0.0:
Language: Chinese / English
Original compilation by Yang: http://www.gaojiquan.com/thread-9330-1-1.html. A German guy has it available for direct download: TWRP 2.5.0.0 for ZTE N909
I translated it back to English (download link below)
TWRP v2.8.4.0:
Language: Chinese / English
Original compilation by 99646P: http://tieba.baidu.com/p/3559914472. It is a dual language version, where you can change to English within the recovery. My problem was that it started straight in Chinese, which made it difficult for me to find the setting for the language switch. Direct link to the download site: http://pan.baidu.com/s/1hqGfoVy
I modified it to English / English for English start-up (download link below)
TWRP v3.0.0.0:
Language: Multilingual
Original compilation by 99646P: http://tieba.baidu.com/p/4349805138. It is a multi language version, where you can change to English or some other languages within the recovery. My problem was that it started straight in Chinese, which made it difficult for me to find the setting for the language switch - no issue after that was done. Direct link to the download site: http://pan.baidu.com/s/1hrhkLOK
Kernels
Original kernel from ZTE: http://support.zte.com.cn/support/news/NewsDetail.aspx?newsId=1005182
Original ZTE kernel patched up to version 3.4.113: https://github.com/xdatravelbug/android_kernel_zte_n909d
For the dual SIM variant I did not find any updated ROM newer than Android 4.1.2 until now. The single SIM version has several custom ROMs available.
ROMs
to be added
Thanks to
Yang from GaoJiQuan
99646P from Baidu

I bricked ZTE N909. Can you help me to unbrick it? It can boot to stock recovery, but every time update fail and factory reset stuck at logo after restart? Do you know how to boot in fastboot or something else? Can you please upload stock restore files to try with it?

fler_tb said:
I bricked ZTE N909. Can you help me to unbrick it? It can boot to stock recovery, but every time update fail and factory reset stuck at logo after restart? Do you know how to boot in fastboot or something else? Can you please upload stock restore files to try with it?
Click to expand...
Click to collapse
Not exactly sure what is failing during the update. But you can try the following:
* Install a custom recovery
* Download either the original update package from ZTE N909 Taiwan ROM or a custom ROM version
* Install that ROM
As you can boot into stock recovery, you can also try to clean/erase all partitions in there or you do it via TWRP. The usual way going to fastboot (with the phone switched off) is by pressing and holding power + volume up (or down). In fastboot mode connect your phone to USB and open a command prompt. If you only want to test the custom recovery use "fastboot boot <image.img>". If you want to directly flash the custom recovery use "fastboot flash recovery <image.img>"
Let me know if this information does not help.

Request cm11 rom or newer cm rom
Hi!please update the cm rom for n909 please please!Thank you so much.

ThinkeurDroid said:
Hi!please update the cm rom for n909 please please!Thank you so much.
Click to expand...
Click to collapse
I am working on it trying with Marshmallow for now, because to my knowledge that it the latest supported version for our old Qualcomm device. Pls be patient as I am not that experienced with compiling and just try it for fun

Quick update after a long time: I patched the original kernel v3.4.0 to v3.4.113. Trials are still ongoing if something screwed up doing that. Especial the bluetooth files caused some issues during the patches because ZTE uses different variable-names than Linux.

Rooting and installing Lineage OS on AGM X1

Update: The instructions below are for the AGM X1 eu version, for the AGM X1 International version follow this thread, it's a work in progress and not available yet.
As you might be aware the AGM X1 is a fantastic rugged android, aside from the great hardware, the source code of the phone is available to devs. The combination of excellent ruggedness, hardware and open source makes the AGM X1 "the best choice in phones" at the moment for me period.
Unfortunately the information on how to root and install the available Lineage OS port is not very clear
I spent a few hours trying to find the best place to start and it's quite difficult to find
https://w3bsit3-dns.com/forum/index.php?showtopic=814951
This page contains a post below the main top section of the page.
https://w3bsit3-dns.com/forum/index.php?showtopic=814951
Here's the start of the important stuff with some additional information that I added
"The jist of the thread
TWRP 3.1.0 for AGM X1
---------------------
AGM-X1-flash-TWRP-root.zip ( 21,66 ?? )
https://w3bsit3-dns.com/forum/dl/post/10034644/AGM-X1-flash-TWRP-root.zip
OR
Download TWRP + ROOT from Google
https://drive.google.com/open?id=0B871Z4mt2B7Qb0RLMVlSemR4Szg
sha256sum
AGM-X1-flash-TWRP-root.zip b34b19f6666f0456f68e3a452c97aacf2fd3f1b06819ef7a633d95259d22a25f
SR3-SuperSU-v2.79-SR3-20170114223742.zip e147970ca377a184a177092f4c4a8022420cc30785fdaf95e16703da8312426d
Now here comes the difficult part, trying to decipher the following text
Text from thread (bad english)
Installation takes place in a similar way as inthis post, Except that you need to choose the same name! The fifth! The item and the installation of the root rights occurs automatically when you exit TWRP.
Can anyone help me with this, I cannot decipher the above paragraph. Also note that this forum is broken and not working correctly as a site (many issues including: no registration available and also the important link in the paragraph above does not work)https://forum-lw-1.xda-cdn.com/images/smilies/rolleyes.gif
P.s not interested in king root method (too many mentions of malware), will use twrp.
Update: (thanks to Skill3r)
clearer guide - also note that this zip contains twrp 3.0 instead of 3.1 due to backups not working with 3.1 (important)
https://forum.xda-developers.com/an...m-snapdragon-617-4gb-64-t3533020/post71877054
The steps :
First You need to download this package and extract it : http://www53.zippyshare.com/v/3sgYq5cu/file.html
sha256sum
AGM-X1-flash-TWRP - Skill3r MOD.rar a0e755dc513b716e5a5369481f0761a4c6a9ec60401bd9c0c060579da87f3668
Contents with sha256 hash
adb.exe f05ff055b2ce9213d0b349da7ef713664d66a13134be76820cd072cd1e44211a same as twrp 3.1 version
AdbWinApi.dll 14a51482aa003db79a400f4b15c158397fe6d57ee6606b3d633fa431a7bfdf4b same as twrp 3.1 version
AdbWinUsbApi.dll 041c6859bb4fc78d3a903dd901298cd1ecfb75b6be0646b74954cd722280a407 same as twrp 3.1 version
fastboot.exe 632f4f2039b76082f2c090f6aec43893e93e8b32d0aae6b7cfa03f9b71d5d897 same as twrp 3.1 version
One-key-flash-twrp.bat f3e5a611166e970cb41a0040979da305b9d91abc44537cab9af94110381fbf54 different from 3.1 version
recovery_AMG-X1_es_by_MDSdev.img 3eb8df185afaacaae4a754ba3c18e5e86ea140f0b115ab73d28fe2ba64088fae different from 3.1 version
SR3-SuperSU-v2.79-SR3-20170114223742.zip e147970ca377a184a177092f4c4a8022420cc30785fdaf95e16703da8312426d same as twrp 3.1 version
1) Enable the developper settings
Go to Settings>About phone and hit "kernel version" 7 times to unlock
2) Enable the OEM bootloader unlock
Find in settings>dev options
3) Enable the USB debugging
Also in settings>dev options
4) Plug an usb cable and when the windows ask for the RSA identity of the computer, allow it and check to always allow the computer.
5) Shutdown your phone
6) Press VOL down + power and after long press the power button
7) Now in recovery mode, go to reboot to bootloader, a green message is shown with fastboot.
8) Now launch the One-key-flash-twrp.bat in package and plug your phone
9) Press any key and follow the instructions in the script.
10) TWRP should launch, you need to swipe to allow modifications in system
11) Press a key in the script, TWRP should reload, TWRP is now installed in the phone, you need to allow modifications in system again.
12) To root the phone, you just need to exit TWRP, he gonna ask to root the phone, you just need to swipe to root the phone.
Now you have TWRP installed and the phone is rooted.
If something goes wrong and bootloop the phone, please just follow the AGM instructions with the original package and the procedure to reflash the rom (on the external SD card and with VOL UP + VOL Down + Power)

I've made progress, but I'm stuck on finding a suitable driver for the adb interface on windows XP for the AGM X1.
For drivers I've tried
NOT WORKING! Google USB drivers
https://developer.android.com/studio/run/win-usb.html
sha256sum
latest_usb_driver_windows.zip 1ee1d023a99ffac962af4454eb9b9900f6858c687b4d5311e8fb361548d6c078
NOT WORKING!
https://forum.hovatek.com/thread-16965.html
which should bring you here
https://drive.google.com/file/d/0B4S-Z726VJ2SLW9zNXdqWDBQQkE/view
sha256sum
a3312727a77c3ab89e0d7463cd252cffec554a182f78195f6908f62132c5c174
The important file in the zip archive is
SHA-256 08e5e7e5f30801b363f08a6106425faa1c505bd048a18c846a5b3e5959a4998e
Called
Setup.exe
Qualcomm_USB_Driver_V1.0.exe
among others.......
MD5
906c4effd6a20be22ea026a43a3cb7b3
SHA-1
89df6ca0d893d9355741d8ca11cdebea1fbbb095
NOT WORKING!
Univeral drivers
https://github.com/koush/UniversalAdbDriver
https://adb.clockworkmod.com/
sha256sum
UniversalAdbDriverSetup.msi 4e77e303bba6cf84588bdb6da91f7a875d406f7930cbe9f4d2aae0b643c0c928
NOTE: Problem installing: universal adb driver, there was a problem with this windows installer
Does any one have any advise please. Obviously I've checked the Manufacturers site they have not provided a driver. The chipset is Qualcomm MSM8952.
Thanks in advance.

Hello, for the drivers, simply plug the phone on USB and select CD in options (where you can check 'simply reload' mtp etc ...)
On the computer you can install the drivers now

Hi Skill3r,
Recommended (MAYBE THE DRIVERS WORK ON OTHER VERSIONS OF WINDOWS, BUT LINUX IS SO MUCH EASIER/BETTER)
I gave up on Windows XP. Now I'm using Xubuntu 16.04 LTS and EVERYTHING IS CONNECTING TO THE COMPUTER with this guide (without going to qtadb installation)
http://bernaerts.dyndns.org/linux/74-ubuntu/354-ubuntu-xenial-android-adb-fastboot-qtadb
p.s the vendor ID is "Qualcomm, Inc": with the code: 05c6 (it's in that github download in the link above, no need to add it specially just follow the guide)
The phone is recognized no special drivers required IT ALL THERE ALREADY! I took the commands from the bat file, changed (take away .exe e.g fastboot.exe to fastboot)
So the problem I'm getting now just after loading twrp with this command
fastboot boot recovery_AGM-X1_es_by_MD5dev.img
And this problem is............
That the touchscreen is unresponsive and I'm unable to check the box and swipe to allow TWRP to modify the system.
I have the AGM X1 International edition.

For me also:
Wenn I´m in the TWRP menu, i´m nt able to click on a button or swipe the last button, because the Touchscreen doesn´t work.
How can I solve this problem, install twrp and root the phone? because i would install LINAGEOS...or what is the best Rom/Custom Rom for the agm x1?
Please help me.
thanks

Both twrp image files below (twrp 3 and 3.1) have the touchscreen problem
sha256
AGM-X1-TWRP-3.1.0.img 22b7d529511b0b191c09e850c14b0d4ed6e32cdddc6defd688bcd78d40be2528
recovery_AMG-X1_es_by_MDSdev.img 3eb8df185afaacaae4a754ba3c18e5e86ea140f0b115ab73d28fe2ba64088fae
motsch_, what version of AGM X1 do you have, international?
Have you found any references to this problem in the main discussion pages.
We need to look for any references to this problem, or special img's for this version of phone.
Here's the older xda thread on the agm x1
https://forum.xda-developers.com/ge...ualcomm-snapdragon-617-4gb-64-t3533005/page12

Hi,
how can I see which version does i have?
For the moment i havent found any solution for installing twrp.
I have rooted the phone with Kingroot.
Doesnt exist a solution for us?

We can go to "settings" > "about phone" > scroll to bottom and let me know the
hardware version
software version
kernel version
I know mine is X1 international not EU as I just bought it and the EU version is discontinued, it has the following
hardware version: V1.00
software version: L1253.6.03.01.BYD
kernel version: 3.10.73
Also is there any awesome developers out there that would be interested in making a TWRP version - forked from the original TWRP and put on github.
And maybe then make your own port of Lineage, again with all changes to original Lineage forked on github.
Open Source and transparency of course is the reason for this.
Any one else with a AGM X1, please chime in because if we can get just a few dollars together we can get this done very quickly.
I pledge $25 for round one

Here's a reference to the touchscreen issue
https://translate.google.com/transl.../index.php?showtopic=814951&st=460&edit-text=
08/01/17, 18:45
"Am11go,
I downloaded AGM X1 TWRP Supersu from the caps, it helped, booted TWRP, but the screen did not react at all, like all buttons except on / off, it extinguishes the screen and does not include anymore ... Apparently the hands are crooked, although with bv5000 It was. How to determine which TWRP, under which version?"

if you can find a solution, can you let me please know that?

Found on 4PDA :
Demanda Sam, dit - il. TWRP assemblé avec le noyau et DTB de L1253.6.02.01.BYD. Maintenant , l'écran tactile fonctionne très bien.
hxxps://4pda.ru/forum/dl/post/10490628/twrp_3.0_L1253.6.02.01.BYD.zip
hxxps://4pda.ru/forum/dl/post/10490629/twrp_3.1_L1253.6.02.01.BYD.zip

AGM X1
HARDWARE & VERSIONS
International version
screen: Edo rm67191 fhd Amoled non-oleofobic non-sunlight readable
HW: Qualcomm MSM8952 hs8952qc
Hw other: RAM 4 Gb LPDDR3 933 mhz
fingerprint reader – FPC1020
notification led – aw2013
camera – Omnivision OV13850 13MP ??
SW: Android 5.1.1 LMY47V
L1253.6.02.01.BYD
EU version
screen: Samsung s6e3fa3 fhd super amoled oleofobic?? non-sunlight readable??
HW: Qualcomm MSM8952 hs8952qc
SW: Android 5.1.1 LMY47V
L1253.6.02.01.EU
Gold version
screen: like international?
HW: same?
SW: like international?
reference discussions: https://4pda.ru/forum/index.php?showtopic=793964
https://forum.xda-developers.com/ge...gm-x1-qualcomm-snapdragon-617-4gb-64-t3533005
https://www.movilesdualsim.com/foros/agm-x1-sd617.1152/
about screen: https://www.devicespecifications.com/en/editor-review/993738/3
http://gearopen.com/phones/agm-x1-review-rugged-smartphone-not-drown-but-froze-53924/
KERNEL SOURCE
https://github.com/zhaochengw/android_kernel_agm_agma3eu
KERNEL CONFIGS EU vs INTERNATIONAL MAIN DIFFERENCE
EU
CONFIG_TOUCHSCREEN_GT1XX=y
CONFIG_TOUCHSCREEN_GT1X_GESTURE=y
CONFIG_TOUCHSCREEN_GT1X_FH=y
# CONFIG_TOUCHSCREEN_SYNAPTICS_DSX_V20 is not set
INTERNATIONAL
# CONFIG_TOUCHSCREEN_GT1XX is not set
CONFIG_TOUCHSCREEN_SYNAPTICS_DSX_V20=y
CONFIG_TOUCHSCREEN_SYNAPTICS_DSX_I2C_V20=y
CONFIG_TOUCHSCREEN_SYNAPTICS_DSX_RMI_DEV_V20=y
CONFIG_TOUCHSCREEN_SYNAPTICS_DSX_TEST_REPORTING_V20=y
CONFIG_TOUCHSCREEN_SYNAPTICS_DSX_FW_UPDATE_V20=y
# CONFIG_TOUCHSCREEN_SYNAPTICS_GLOVE is not set
I compared the kernel configs from latest international lollipop rom with the one from Flyme OS 5 (compatible with x1 EU). I have not a boot.img from latest EU firmware, but should not matter.
This should explain the black screen when trying to install EU rom on International X1.
I found these options are not enabled in standard kernels, they may be of interest:
CONFIG_MSM_VPU CONFIG_POWER_AVS_MSM CONFIG_USB_MSM_ACA
reference: how extract kernel configs with extract-ikconfig (from kernel_dir/scripts)
https://github.com/MotorolaMobilityLLC/kernel-msm/issues/73
ROMS
EU: stock,lineage 13, flymeOs 5-6 https://4pda.ru/forum/index.php?showtopic=814951
INTERNATIONAL: only stock (latest is L1253.6.03.02.BYD)
lineage 13 (removed) https://4pda.ru/forum/index.php?showtopic=814951&st=300#entry62399105
PORTING ROMS AND KERNELS
From EU to International:
take EU roms and replace boot.img with one from International roms? (kernel and dtb table??)
From other Phones:
- Similar MSM8952 Phones: https://www.gizmotimes.com/lists/phones-qualcomm-snapdragon-617-processor/19660
- Guides: https://forum.xda-developers.com/android/general/how-to-port-roms-easy-100-t2804390
https://forum.xda-developers.com/showthread.php?t=2707438
http://ohheyitslou.blogspot.it/2011/09/ohheyitslou-custom-android-kernel-guide.html
- Interesting Kernels: https://forum.xda-developers.com/moto-g4-plus/development/kernel-elementalx-g4-0-01-t3424836
On Snapdragon 617 at the moment should be possible Overclock, but I have found no Voltage control patches from other phones kernels.
TWRP
EU: https://4pda.ru/forum/index.php?showtopic=814951
INTERNATIONAL: https://4pda.ru/forum/index.php?showtopic=814951&st=300#entry62309514
TWRP 3.0 for android 5, TWRP 3.1.0 should be for android 6 and it may have problems with restoring
TWRP reference info https://www.movilesdualsim.com/tema/twrp-by-mdsdev-para-el-x1.168070/

Hi liamotoub,
Thanks for the information. So Lineage OS is not available on the international version of the AGM X1 yet. I see.
Also Thank you skill3r for the links, I see they are 404 now unfortunately.
liamotoub, you seem to know what you're doing? would you consider taking on this as a project.
It's certainly worth keeping an eye on 4PDA, pitty I cannot read russian. If any members of 4PDA in the loop regarding the AGM X1 international are reading this please chime in. Thank you all

Hello, unfortunately I'm not a programmer, I just do "trial and error".
404 is a 4pda.ru error for not registered users, follow this guide to register
hxxps://doorsgeek.blogspot.it/2015/08/4pdaru-loginregister-captcha-tutorial.html
To read just use google translate
hxxps://translate.google.com/translate?hl=it&sl=ru&tl=en&u=https%3A%2F%2F4pda.ru%2Fforum%2Findex.php%3Fshowtopic%3D793964%26st%3D1300&sandbox=1
PS. another phone with a lot of ROMs (android 5 6 7) and similar hardware of X1 (msm8952) is ZTE Nubia Z11 mini
hxxps://translate.google.com/translate?hl=it&sl=ru&tl=en&u=https%3A%2F%2F4pda.ru%2Fforum%2Findex.php%3Fshowtopic%3D803370&sandbox=1

and what can i do with the "twrp_3.0_L1253.6.02.01.BYD.img" from the download from 4pda?
I would install twrp on my x1

motsch_ said:
and what can i do with the "twrp_3.0_L1253.6.02.01.BYD.img" from the download from 4pda?
I would install twrp on my x1
Click to expand...
Click to collapse
With TWRP you can flash another image (lineage OS for example, when we find or make a suitable version for the international version AGM X1)
TWRP will also give you the option to get root permissions, so you can use certain apps that require it. It's like the difference between user and administrator account in windows. It's called rooting because Android is based on Linux, the root account is the account with "super user" privileges, your phone will be open to allow more areas of the system to be used/wrote to/read. It allows your phone it's full potential.
With TWRP we can also do backups and restores of the entire existing ROM and phone contents
So TWRP is the first step before we get the ROM (lineage OS) on the phone https://forum-lw-1.xda-cdn.com/images/smilies/cowboy.gif
Another option for rooting is available called King Root however this comes with a lot of MALWARE AND ADWARE and it is advised not to use it. Besides it doesn't have all the flashing, backup and restore tools anyway. It just gets you root.
That is why we really need to find a working copy of TWRP for the AGM X1

INSTRUCTION TO COMPILE KERNEL (with android ndk on linux 64bit)
git clone hxxps://github.com/zhaochengw/android_kernel_agm_agma3eu
cd android_kernel_agm_agma3eu
export ARCH=arm64
export SUBARCH=arm64
export CROSS_COMPILE=/opt/android-ndk/toolchains/arm-linux-androideabi-4.9/prebuilt/linux-x86_64/bin/aarch64-linux-android-
[adapt commandline to your installation or use the one in the kernel sources (toolchains/aarch64-linux-android-4.9/bin)]
make xconfig
[load your agm X1 config file, EU version is in arch/arm64/configs/agma3eu_defconfig,and make your changes]
make -jX
[where X is number of your cpu cores]
bootimg/dtbTool -o dt.img -s 2048 -p ./scripts/dtc/ ./arch/arm/boot/dts
bootimg/mkbootimg --ramdisk bootimg/ramdisk_agma3eu.img --ramdisk_offset 0x01000000 --base 0x80000000 --tags_offset 0x00000100 --pagesize 2048 --kernel arch/arm64/boot/Image.gz --cmdline "console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 earlyprintk" --dt dt.img --output boot.img
Image.gz ramdisk_agma3eu.img dt.img will be incapsulated in boot.img.
Test if kernel works:
#adb push boot.img boot
If not boot restore previous boot image.
notes:
1.if you load the international kernel config, and you got some errors related to VENDOR, enable
CONFIG_MACH_HIS_SMARTPHONE CONFIG_HIS_BOOT_INFO
and fill CONFIG_HIS_VENDOR_NAME: Android CONFIG_HIS_PRODUCT_NAME:agma3eu
2.if you got an error related to msm_dba_internal.h not found, edit
drivers/video/msm/msm_dba/msm_dba.c and replace #include <msm_dba_internal.h> with #include "msm_dba_internal.h"
PS. replacing my boot.img is not sufficient to make Lineage 13 and FlymeOS5 work, they go in bootloop.

I've uploaded the TWRP versions for the AGM X1 "International version" from the 4PDA links above, to save somebody the trouble of signing up. Version 3.1 is what you want I think (but maybe the backups/restores don't work on v3.1 as skill3r has pointed out or maybe the international version is different?)
SHA-256
72422060a34a995a6f29da1c0a6d5737f7df3ad426d0a7105267730f22e74b9c
File name twrp_3.0_L1253.6.02.01.BYD.zip
Download: https://mega.nz/#!0yZCyIaA!lUnmyeQNinQlzIcwfWZ8F5l6Pz2jlumxzhVx57U6G-M
SHA-256
96c92a52805c0db4fc84c652199887e93a30dae3fe3ead36e14715f7fc736d22
File name twrp_3.1_L1253.6.02.01.BYD.zip
Download: https://mega.nz/#!FmxmFKgK!cCfNsGj3gRMVkl_EI6ROI2-5RbFQsuyElFxRIvN76ug
Also, liamotoub, send me your PayPal address and I'll send a few dollars your way, that information is great thus far

These 2 files should be TWRP 3.0.3 and 3.1.0 right?
I want to point out that also the latest 3.1.1 ( relased for the gold X1 by a Spanish forum, movilesdualsim) works on international X1 mega:#!vB9g3Aab!_gyrr6rP_rJDheGgIseI2u2TglNw1vmv7dDjUnDYJb4 with not encrypted phone.
To try it without touching the recovery partition use:
#adb reboot bootloader
#fastboot boot recovery_name.img
EDIT: it give some problems when flashing new INTernational ROMs, because they think the phone is GOLD and refuse to install due to their updater-script; should be sufficient to modify the build.prop of this recovery or a similar file, with international version "signature".
TWRP 3.0.3 3.1.1, those that I tried, fail to recognize encrypted fylesistems, so backups of this kind will not work.
Another minor bug is the wrong date (1970) in automatic naming of backups folder, but that's common on most phones.
I managed to make FlymeOs 5.1 boot on international X1, but I don't recomend it, it's full of bloatwares and wifi and other things looks to be not working
https://mega.nz/#!djJ3jbbT!Kr6qMyTcggsrYyPeDnySHpp7EOgUZnG-tvTqewdqkmk
Make full working nandroid backup before trying it.
To port lineage 13 I think marshmallow kernel sources are needed, with present sources only lollipop roms could be ported AFAIK, like CM 12.1.
Question to X1 users: on stock rooted rom, do root requesting apps (afwall, kernel audiutor etc) start at boot time? On mine no, I have to start them manually.
On stock rom beware of these preinstalled apps, may be adware:
com.gangyun.beautysnap
com.oupeng.max.hisense

Is there any specific advantage using the TWRP movilesdualsim 3.1.1 version rather than the 4PDA versions other than a slightly higher version.
If I encrypt my phone would there be any other issues other than not being able to do twrp backups and restores? It would still work?

[ROM] SUPERCINQUETREDUE - MS lumia 532 dual sim - fcu 10.0.15254.124

Buonasera and welcome to the last tribute for windows 10 mobile!!! :crying:
This rom is for everyone has its 532 dual sim stucked at 8.1 update.
Features:
- Fall creators update 10.0.15254.124
- CV IT
- Builded for Hynix emmc
- Root acces
- useless apps removed
- Some apps for tweaks
- Adblocker
- Continuum library enabled
- Offline charging enabled
- Little improvements like reg sim enabled ecc.
- Material design icons
Instructions:
- Start unlocking bootloader via wpi using RM1031_02074.00000.15234.28004_RETAIL_prod_signed_1026_025F43_000-IT.ffu
and MPRG8x12_fh.ede
- Download the lumia 950 (rm-1085) firmware for unlock the device (bootloader spec b) via lumiafirmware or wpi
-Flash supercinquetredue like a custom rom, no reset!!
Avete finito!!!
DOWNLOAD​
Goodbye windows 10 mobile!! let's fly like an angel :angel:
Thanks heathcliff
BONUS!!
[ROM] SUPERDENIM FOR NOKIA LUMIA 820

So...is a zip file

no!! i'ts a flashable file, came from a full backup, my friend

Nevermind. I opened with zip and inside are efiesp, mainos, data.
I still wait someone who do the same for lumia 530

if you have big balls, try with it!!! the chipset it's the same!! it's all about your choice

Already tried...no bootable option
And my chip is Samsung

it's normal don't have bootable option because is a backup and no oobe

My phone work with lumia 830 efiesp.bin.

why don't you try cook yourself your rom?

Coz my device is not capable to pass thru update or hardreset.

augustinionut said:
Coz my device is not capable to pass thru update or hardreset.
Click to expand...
Click to collapse
I don't understand, why?

Coz is halfbricked. I reflashed to wp8.1 with reset protection activated and ffu gdr2 variant don't exist.

augustinionut said:
Coz is halfbricked. I reflashed to wp8.1 with reset protection activated and ffu gdr2 variant don't exist.
Click to expand...
Click to collapse
To boot anything you just have to replace bootarm.efi in EFIESP with a GDR2+ one (GDR2+ includes windows 10 as well). The one in this custom rom efiesp is probably still 8.1. This will solve the boot device not found problem.

gus33000 said:
To boot anything you just have to replace bootarm.efi in EFIESP with a GDR2+ one (GDR2+ includes windows 10 as well). .
Click to expand...
Click to collapse
GDR2 of the same phone?
I replaced bootarm.efi with lumia640xl one, my 530 booted to sad face .

Direct download link?

is this necessery to use that ffu? i mean can't i use ffu of my own variant?

how to unlock bootloader for lumia 532 ds ... more detail please ... my lumia is alwa
canapo92 said:
no!! i'ts a flashable file, came from a full backup, my friend
Click to expand...
Click to collapse
how to unlock bootloader for lumia 532 ds ... more detail please ... my lumia is always restart and restart ... please help me ...