Hi, i have just got a new xda orbit and noticed that when the backlight goes off after a set period (30 secs), it seems to be still lit but only very slighty, so at night you still see the today screen etc. But if i press the power button then the display goes off. Is this correct ?
The reason im asking as i have been using an xda mini s for over a year and when the backlight times out the display is not visible at all in the dark. You have to press the power button to see the screen again.
Hope this makes sense
Yes, that is fine. The dim backlight will go out in time too.
MaskedMarauder is 100% right. It will go out eventually.
Ok thanks guys for the quick reply, just obsevered it last night and noticed it was different.
Thanks again...
I've tried posting about this before, but it never gets answered - i've got a mda III, and that dims to brightness 1 (from within the registry), but will never go out - regardless of what rom i've tried.
I've also noticed that i can force set it to 0 in the registry, but thats the overall screen brightness. None of the other reg keys (putting bkl1:, etc in the various power keys) seem to work.
Any one got any ideas or utils to sort this? I'd try to code this as there are some code samples which allow you to force this, but i've not got VS
Like you i've tried all the registry edits i can think off to no avail. I too have a wizard and find this irritating - plus backllight stays on when media player on etc.. No difference with wm6 so i guess it maybe a hardware issue. I use a small app to turn off display when apps are running and i want the display off.
I use backlight time of 30 secs and power of 1 minute - so overall similar to my wizards backlight time of 1 minute.
why not..
why not just pres the I/O button on the side to turn off the backlight when u don't want it on? obviosuly a bit of a hassle, but if u get into the habit of doing it, no problems
Because that puts the device into standby and turns everything else off too (except the phone etc.) So if your listening to music your plunged into silence.
I had an XDA2i (Alpine) previous to my Orbit and I actually prefer the dimmed screen.
A brief press on the 1/0 power button WILL make the device go into standby.... BUT...
press and HOLD the power button for LONGER than 2-3 seconds and it toggles the backlight on and off, whilst STILL keeping the device on!
hope this helps
Joe
Whenever I press the top button on my Wildfire to turn the screen off it takes 2 seconds for the screen the turn black, and 3 seconds for the buttons to dim out.
Does anyone know how to disable this?
Same here, but a bit faster , screen goes off just , l8 buttons.
Good to hear I'm not alone ;S.
This is really annoying, I tried checking every animation option, but it just wont change.
I can see were you guys are coming from because its not instant..! But come on does it really affect anything? Lol
Sent from my HTC Wildfire using Tapatalk
As we all know(or should know if you read around the forums) that there is an issue with "sod". Now these sods are not the same as the sod i was familiar with before 4.2. Before 4.2, the device(s) were for all intensive purposes not alive. Sure you could connect to adb, but the device was "dead" until you pulled the battery and rebooted. But with these 4.2 "sods", the device is alive, with the exception of the screen not being able to turn on. Phone calls and messages still come in. notification sounds still play, and you can use the volume buttons to raise/lower the volume. But you still have to pull the battery and reboot for the screen to come back on. Running logcats via adb doesnt seem to show anything related. Well, ive found a way to reproduce these 4.2.X "sods" while the device is awake with the screen on. I can reproduce it at will, and have had other users confirm this. What i do is this.. I go into the main settings, display, then brightness. Turn off automatic brightness if its on. Now adjust the brightness, up, then down, then up(back and forth, but take your finger off the slider when you go up then down). now press ok to set the brightness. Go back into the brightness setting and repeat. Eventually(sometimes seconds, sometimes minutes) the screen goes completely black, like its off, but the device is completely awake. same as these 4.2 sods, phone calls and messages come in, notifications sound, etc. Only difference is the device screen is on when it goes black instead of it being off. The symptoms are the same. This behavior leads me to believe that it most likely isnt a kernel issue like many believe. I believe that its related to some coding that controls the screen. As we know, every rom/kernel has shown this behavior, even stock and unrooted(some more, some less). Personally, i had 3 of these sods last month(trinity kernel/rasbean rom), but i know that some users have them many times a day unfortunately. What could it mean that i can replicate this behavior on an awake device? Any more thoughts about this?
maybe someone using another kernel/rom can try to reproduce this?
I haven't tried your method yet. I'll and post my results here. I was able to replicate it using another program (check the links below)
But reading your post, I'm sure now that SOD has to do with autobrightness or brightness control (knowing that, maybe it is easy to solve?)
Check my posts:
http://forum.xda-developers.com/showthread.php?p=35205418#post35205418
http://forum.xda-developers.com/showthread.php?p=35496824#post35496824
Check my post here:
[URL="http://forum.xda-developers.com/showpost.php?p=35899150&postcount=26638"]http://forum.xda-developers.com/showpost.php?p=35899150&postcount=26638[/URL]
whre I answered to that phenomen. I was on RBJ + franco r348 that time
I can't reproduce (force) it now with RBJ + franco r360, I tried about 100 times.
Just wanted to post my results, maybe it's too early to tell as r360 is too young.
Why does this not happen on N4, N7 and N10
+ never had an SoD in this wee k (Running anarkia's stable berserk releases, only on 511 & 515 / Jellybro )
Ashtrix said:
Why does this not happen on N4, N7 and N10
+ never had an SoD in this wee k (Running anarkia's stable berserk releases, only on 511 & 515 / Jellybro )
Click to expand...
Click to collapse
Maybe because OMAP is abandoned at 3.0.
Ashtrix said:
Why does this not happen on N4, N7 and N10
+ never had an SoD in this wee k (Running anarkia's stable berserk releases, only on 511 & 515 / Jellybro )
Click to expand...
Click to collapse
it does. just not as often/widespread as with the gnex. ive seen enough reported with the n7 and n4(i havent read any reports with the n10 though).
simms22 said:
it does. just not as often/widespread as with the gnex. ive seen enough reported with the n7 and n4(i havent read any reports with the n10 though).
Click to expand...
Click to collapse
Sometimes I have my screen say go off but I will click the lock button The screen don't come on but it is still responding. Meaning I can still unlock the device as vibration tells me if I click the ring or not. So this is all down to the SOD? WoW. Learn something new everyday. I am on Xenon-HD 11-12-12 but also had it on stock too. With me though to fix this it just required to to press the power button a few time then the screen returned. Honestly I don't find it annoying at all UNLESS I need to say make a call to my local emergency services. (999 in UK). That is the only time. My nexus S does the same too with the screen but only after I had the NAND chip replaced by Samsung. Hope you guys can find something and my bit of info helps a little.
Regards
Jessie-James
Sent from my Galaxy Nexus using XDA Premium HD app
Jessie-James said:
Sometimes I have my screen say go off but I will click the lock button The screen don't come on but it is still responding. Meaning I can still unlock the device as vibration tells me if I click the ring or not. So this is all down to the SOD? WoW. Learn something new everyday. I am on Xenon-HD 11-12-12 but also had it on stock too. With me though to fix this it just required to to press the power button a few time then the screen returned. Honestly I don't find it annoying at all UNLESS I need to say make a call to my local emergency services. (999 in UK). That is the only time. My nexus S does the same too with the screen but only after I had the NAND chip replaced by Samsung. Hope you guys can find something and my bit of info helps a little.
Regards
Jessie-James
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
if your device wakes, even after a few presses, its not sod.
simms22 said:
it does. just not as often/widespread as with the gnex. ive seen enough reported with the n7 and n4(i havent read any reports with the n10 though).
Click to expand...
Click to collapse
we cannot pull out the battery and fix the SoD on those devices so how could we fix that on N4 & N7 ?
Ashtrix said:
we cannot pull out the battery and fix the SoD on those devices so how could we fix that on N4 & N7 ?
Click to expand...
Click to collapse
pressing and holding the power button for 10-20 seconds will force reboot those devices.
A battery pull isn't necessary; you can shut down the phone with a little practice (depending on your lockscreen).
1. Press the power button (or wait) to lock the phone
2. Press the power button again and unlock
3. [optional] Press the home button (center of screen near bottom edge)
4. Press and hold the power button until a short vibration is felt.
5. Touch the Power Off button (center of the screen just below a horizontal line from the midpoint of the volume rocker). This puts you in the Power Off confirmation dialog.
6. Touch the screen in the approximate location of the "OK" button. I start at the middle on the right side and work my way down. Soon I get the long vibration telling me the phone has powered off. This is the hardest to master since feedback isn't immediate; the long vibration happens several seconds after I successfully hit the OK button.
7. If nothing happens, press the power button to re-lock and start again.
8. Practice when the phone is functioning normally, and you'll be prepared for your next SOD.
My observations (bone stock GSM phone):
This happened once in a pitch-black room. The screen does not go perfectly dark, but it is extremely dim and uniformly grey. I could not make out any details, so the contrast is completely gone.
SOD happens all the time playing Ingress, or other apps where the screen is active for a long time. It seems to happen most often when the display partly dims before going to sleep. My phone is set to sleep at 30 seconds, and the "pre-dim" happens at about 25 seconds. That's usually where I get my SODs.
SOD happens to me less often with auto-brightness set to OFF. It's extremely rare in normal use (but happened just now as I replied to a text!)
MondoMor said:
A battery pull isn't necessary; you can shut down the phone with a little practice (depending on your lockscreen).
1. Press the power button (or wait) to lock the phone
2. Press the power button again and unlock
3. [optional] Press the home button (center of screen near bottom edge)
4. Press and hold the power button until a short vibration is felt.
5. Touch the Power Off button (center of the screen just below a horizontal line from the midpoint of the volume rocker). This puts you in the Power Off confirmation dialog.
6. Touch the screen in the approximate location of the "OK" button. I start at the middle on the right side and work my way down. Soon I get the long vibration telling me the phone has powered off. This is the hardest to master since feedback isn't immediate; the long vibration happens several seconds after I successfully hit the OK button.
7. If nothing happens, press the power button to re-lock and start again.
8. Practice when the phone is functioning normally, and you'll be prepared for your next SOD.
My observations (bone stock GSM phone):
This happened once in a pitch-black room. The screen does not go perfectly dark, but it is extremely dim and uniformly grey. I could not make out any details, so the contrast is completely gone.
SOD happens all the time playing Ingress, or other apps where the screen is active for a long time. It seems to happen most often when the display partly dims before going to sleep. My phone is set to sleep at 30 seconds, and the "pre-dim" happens at about 25 seconds. That's usually where I get my SODs.
SOD happens to me less often with auto-brightness set to OFF. It's extremely rare in normal use (but happened just now as I replied to a text!)
Click to expand...
Click to collapse
wouldnt it be easier to just pull the battery? thank you for your observations btw.
simms22, I actually think it is a kernel issue. I only experience SOD problems when i use a custom kernel. Also yesterday I flashed stock 4.2.1 and tried for 10 min to replicate SOD using your method - I could not. Today I tried again - nothing.
simms22 said:
wouldnt it be easier to just pull the battery? thank you for your observations btw.
Click to expand...
Click to collapse
My phone is in an Incipio case, and it's more of a pain to separate the case, especially if I'm in my car or out hiking or whatever. I've gotten pretty good at doing it blind. Also, years of running Windows have made me anal about doing orderly shutdowns. :laugh:
Forgot to add earlier: I was unable to replicate with the technique described in the OP. But as long as someone can get this to happen on demand, it ought to be solvable.
Edit: although I got the SOD in normal usage a few minutes after trying the technique in the OP. Maybe the display SODs on some specific number of brightness changes? That would explain it happening more often with autobrightness, also.
Ashtrix said:
we cannot pull out the battery and fix the SoD on those devices so how could we fix that on N4 & N7 ?
Click to expand...
Click to collapse
Just hold down the power button for several seconds. Continue to hold down the power button until the screen blinks off and the boot logo appears.
We are flooding here.. lets discusse this other place and leave the devs alone here
i dont know how replicate this 4.2 SOD, but there is a simple way to avoid it, put all animations inside developers option to 1.0
it doesnt happen anymore to me, stock rom and kernel (i have automatic brightess on if this can matter)
if i put all animations to off or to 0.5, when the screen time out and became black, sometimes it doesnt wake anymore..4.2 sod
andQlimax said:
i dont know how replicate this 4.2 SOD, but there is a simple way to avoid it, put all animations inside developers option to 1.0
it doesnt happen anymore to me, stock rom and kernel (i have automatic brightess on if this can matter)
if i put all animations to off or to 0.5, when the screen time out and became black, sometimes it doesnt wake anymore..4.2 sod
Click to expand...
Click to collapse
When I was running the first few nightlies of CM10.1 it still did the "sod" on me. By default the animation settings are at 1.0. Not sure if it's different on stock.
I've had several sod's daily for last few day's and today finally flashed RBJ from the beginning plus dax's modified kernel and now i'm in watching phase. So far so good.
I have time without any sod... Maybe because I'm trying not to use auto brightness or because of the lastest versions of Francos kernel... Stock ROM
Sent from my Galaxy Nexus using xda app-developers app
This issue started about 3 or 4 days ago for the record. I have been trying to find a solution online but I have yet to come across a real solution (other than sending it in to LG for 9 days (completely unacceptable)). It happens whenever I turn the screen off, either through the lock button or the double tap. The screen will power off correctly and then turn itself back on within the next second. If i leave the screen to timeout at 15 sec like I have it set to, the phone will dim and then the screen will close, only for the screen to immediately turn itself right back on. This is killing my battery life and making my phone constantly overheat.
If someone has found a solution please share it with me, I am reaching my wits end
cenailyass said:
This issue started about 3 or 4 days ago for the record. I have been trying to find a solution online but I have yet to come across a real solution (other than sending it in to LG for 9 days (completely unacceptable)). It happens whenever I turn the screen off, either through the lock button or the double tap. The screen will power off correctly and then turn itself back on within the next second. If i leave the screen to timeout at 15 sec like I have it set to, the phone will dim and then the screen will close, only for the screen to immediately turn itself right back on. This is killing my battery life and making my phone constantly overheat.
If someone has found a solution please share it with me, I am reaching my wits end
Click to expand...
Click to collapse
I got same problem. When I hit to lock/turn off screen, it goes On within a second. It is irritating and making me change smrtphne.
Been starting to experience poor response to my power button waking the phone and also on turning the screen off. I thought maybe it was sticking and had buildup around it. I removed the screen and tried my best to clean out around and behind the button. Did not notice any improvement. Often times it registers like a long hold and prompts the shut-down restart screen.
Are others experiencing or had similar response? Are these buttons replaceable?
Don't know about replaceability, but I rarely ever used my power button. You can work around it in daily use using the FP sensor for both screen on and screen off.
Sent from my Mi MIX 2S using Tapatalk