FastBoot Problem - Xperia Arc Q&A, Help & Troubleshooting

Hello , I have arc s and i practically flashed all the custom rom successfully without fail . recently i had to re install my windows (7) and install flashtool again. Then the problem happened. I installed flashtool version 0.9.15.0 and also driver from its folder. When i flashed via flashmode using official ftf file ...its working fine . Also everytime i install something(Kernel) in fastboot , it flashes .Now i go to cwm and install custom rom(zip) with full wipe .what i get after is infinite bootloop. i never get pass the kernel image. not even bootanimation shows up.I tried everything and its frustrating that i can't install custom Rom now. Any help from pros would be really appreciated. Thanks

redprince said:
Hello , I have arc s and i practically flashed all the custom rom successfully without fail . recently i had to re install my windows (7) and install flashtool again. Then the problem happened. I installed flashtool version 0.9.15.0 and also driver from its folder. When i flashed via flashmode using official ftf file ...its working fine . Also everytime i install something(Kernel) in fastboot , it flashes .Now i go to cwm and install custom rom(zip) with full wipe .what i get after is infinite bootloop. i never get pass the kernel image. not even bootanimation shows up.I tried everything and its frustrating that i can't install custom Rom now. Any help from pros would be really appreciated. Thanks
Click to expand...
Click to collapse
Are you flashing the correct kernel? Or are you hotbooting the kernel by mistake?
Sent from my MT11i using Tapatalk 2

Thanks for reply , i was flashing correctly . so far i've tried Iridescent_Zed_III (ics-lupus) , Xperia UltraKat v2.0.1(KK-provided kernel) but no luck . But i tried TouchwizRom 1.4v with superfusion kernel. it worked great. i don't know whats the problem.

Related

[Q] Xperia arc - stuck in Boot Loop issue - Please Help

Hey Guyz,
i unlocked by bootloader using fast boot method
then i rooted my phone using the same method and it was working fine.
Yesterday i installed CW rom and CWM autoinstaller , to reboot in recovery and installed a mod to bring reboot in Power Off menu options.. it intalled correctly.
But when i rebooted the phone, the sony ericcson logo appears again and again.. i.e it is stuck in boot loop.. m still able to enter in recovery but unable to boot my phone properly..
Please Help...
The First solution is to flash a stock firmware using flashtool.
But which Kernel and which Rom have you tried to flash?
Sent from my iPad using Tapatalk HD
k.. i'l try to flash 4.0.a.283 using fastboot..
BTW
I am noob.. Dont know anything about anything about kernel.. all i did was install Clock work rom.. When i opened it, it said, "you need to install CWM". So i installled CWM autoinstaller...
Now with everything installed, i booted into recovery and installed a mod ( which brings the option to reboot in Power Off menu). It installed correctly... Then i clicked on reboot system now.. That is when i realized that m stuck in boot loop..
hysenkoshy said:
k.. i'l try to flash 4.0.a.283 using fastboot..
BTW
I am noob.. Dont know anything about anything about kernel.. all i did was install Clock work rom.. When i opened it, it said, "you need to install CWM". So i installled CWM autoinstaller...
Now with everything installed, i booted into recovery and installed a mod ( which brings the option to reboot in Power Off menu). It installed correctly... Then i clicked on reboot system now.. That is when i realized that m stuck in boot loop..
Click to expand...
Click to collapse
You must first check the compatibilty of "reboot mod" with the firmware version you use.
Just check the firmware you have in your phone and make sure it matches with the firmware on which the mod is based.
@wayne
I have flashed my phone using fastboot method just like i did it when i was rooting my phone. And Thank GOD it is working fine now..
@KingWecked,
M still trying to figure out, where did i go wrong at the first place...
was it the CWM auto installer ??
or was it the Reboot mod ?? coz i downloaded the mod for xperia arc only..
Do we need to change that kernel thing after rooting ??
I don't know what the hell is a kernel; and after rooting i haven't done anything with my kernel. Should i ???
A kernel is the base of what Android runs
Sent from my iPad 2 using Tapatalk
hysenkoshy said:
M still trying to figure out, where did i go wrong at the first place...
was it the CWM auto installer ??
or was it the Reboot mod ?? coz i downloaded the mod for xperia arc only..
Do we need to change that kernel thing after rooting ??
I don't know what the hell is a kernel; and after rooting i haven't done anything with my kernel. Should i ???
Click to expand...
Click to collapse
Before you install any mod,you must first check the firmware version you are using.You can find it out from Settings-->About Phone-->Build Number.
It contains the firmware version on which your phone is running Ex:4.0.a.283
.283 is the old version firmware and most of the mods dont work on this firmware.You must flash the latest firmware .42 in order to support the majority of the mods and themes available in this forum
And a kernel is very complicated thing.you must not mess with it unless you know what you are doing.Manipulating your kernel might brick your phone permanently.And if you want to know much further about kernels then search the forum and you must find loads of threads explaining about kernels and stuff related with it
@ KingWickedd
are u sure .283 is an old firmware
Coz initially i had "unrooted .62"
For rooting purpose i downloaded this firmware..
So can U please tell me where can i get " rooted 0.42 firmware" where i can start installing all mods right away..
Note: Multiupload links are not working ... Any other links ????
hysenkoshy said:
@ KingWickedd
are u sure .283 is an old firmware
Coz initially i had "unrooted .62"
For rooting purpose i downloaded this firmware..
So can U please tell me where can i get " rooted 0.42 firmware" where i can start installing all mods right away..
Note: Multiupload links are not working ... Any other links ????
Click to expand...
Click to collapse
Yes I am sure its the old version where as .42/.62/.69 are the latest firmware versions.They have almost everything in common and they differ based on the regions they are released in.
For rooted .42 firmware..follow this link below..
http://forum.xda-developers.com/showthread.php?t=1330314
Boot looooop
I am facing the same problem but the solutions given in here doesn't seem to work..please help me.
I had .42 rooted on my XPERIA ARC, unlocked bootloader.
Installed Cyanogenmod Stable version and flashed its boot.img.
Wiped the cache n data.
Installed the zip file after going into recovery mode but phone is stuck in BOOTLOOP...
When i try re-flashing .42 generic firmware using flashtool, PC hangs and i need to restart
Please help me out guys...
You need to flash kernel toooo
From my sexy LT15i
amulbaby said:
I am facing the same problem but the solutions given in here doesn't seem to work..please help me.
I had .42 rooted on my XPERIA ARC, unlocked bootloader.
Installed Cyanogenmod Stable version and flashed its boot.img.
Wiped the cache n data.
Installed the zip file after going into recovery mode but phone is stuck in BOOTLOOP...
When i try re-flashing .42 generic firmware using flashtool, PC hangs and i need to restart
Please help me out guys...
Click to expand...
Click to collapse
Don't worry...first start PC in safe mode first and then connect mobile in faatboot mode and wait for minute.. driver will install automatically..then restart PC in normal..then flash kernal in fast boot mode with recovery inbuilt..then flash rom.. it work for me in past..
Sent from my Xperia Arc using xda premium
hEY GUYS,
Thanks a lot...
What i did was...Flashed the kernal again...
Wiped Dalvik Cache...Rebooted into recovery...
Wiped Data n Cache partition...rebooted
And then re-installed the zip from SD card...
But now i wanna have a help reg. restoring of nandroid backup....
I had taken a nandroid backup using CWM Auto-installer...
But now I wanna know how can i restore my apps that i had with Stock ROM...i tried a advanced backup on /data alone but then, its not booting up if i do so...
Please help..

[FIXED] Xperia Stuck at Logo and more

So, Hello. I will tell you the story:
After 2 days of searching on my own, instead of starting a topic, but just searching for a topic, i am starting a topic myself, because i dont know what to do know anymore.
Here is how it started:
I rooted my phone with Doomlord root, worked fine, Tried installing CWM recovery, Didnt work fine at first, but found an simple app which gave me CWM recovery version 5 ( Outdated, i know)
Then i was trying to flash Xperia Ultimate HD on it, so i did it, cleared everything and booted up, worked, but glitchy ( Buttons too high, didnt look like how it was promised on screens) I readed again, and found out that i just flashed the ROM Ultimate HD, and that you needed Ultimate HD 3.0 installed first, So i did what it said, and installed Xperia Ultimate HD 3.0 ( i suppose there is a modified kernel inside that ROM and thats why you need that first), wiped everything again, and installed The ROM i already installed before, again. And from this point on, it was stuck. I see the FREE XPERIA Logo, and then it goes black, i can get into Recovery ( with CWM Recovery) and i can get into Flashmode and Fastboot, although everytime i go into flashmode and try to flash back to stock with an stock ftf, it says Flash failed! Now turn on phone and enable USB debugging
Also EMMA doesn't work as it wont recognize my device, and Update service won't work either, because that doesnt recognize my device either.
Does someone has a fix for this? :-$ I hope so! Is there maybe a way to flash something with CWM?
Please let me know!
Thanx!
Tico
Hi ! First, is your bootloader unlocked ?
xdlol123321 said:
Hi ! First, is your bootloader unlocked ?
Click to expand...
Click to collapse
Yes. And Rooted
humm free xperia logo? have you flashed kernel yet?I am not sure UHD 3.0 used free xperia kernel(CM kernel). Search and flash ICS kernel http://forum.xda-developers.com/showthread.php?t=1867265 from fastboot and go to CWM recovery and install UHD 3 again.you might have flashed wrong kernel.
shoeseat said:
humm free xperia logo? have you flashed kernel yet?I am not sure UHD 3.0 used free xperia kernel(CM kernel). Search and flash ICS kernel http://forum.xda-developers.com/showthread.php?t=1867265 from fastboot and go to CWM recovery and install UHD 3 again.you might have flashed wrong kernel.
Click to expand...
Click to collapse
Thanks! I flashed Vengeance Kernel and it worked! Thanks for saving my phone, mate!
This topic can be locked
Cheers!
Tlcoman said:
Thanks! I flashed Vengeance Kernel and it worked! Thanks for saving my phone, mate!
This topic can be locked
Cheers!
Click to expand...
Click to collapse
No problem.Try to read descriptions of ROMs before flashing it,you need to flash compatible kernel(if you don't have already) before flashing ROMs. Happy flashing

Stuck at CM9.1 animation after flashing Xperia S

Hi !
I have a locked A.55 Xperia S from Dubai and were trying to install CM9.1 (stable) but now, its stuck at the Cyanogenmod animation. I waited for like 10 minutes but it just won't go from there. Re-flashing the kernal and wiping and then re-installing CM9.1 didn't work.
What I did:
1. Installed the drivers from Google dev website with fastmode driver from Sony dev site.
Selected the ADB mode driver (not the bootloader driver) for the S1boot device in Device Manager.
2. Rooted using Easy Root 1.2 (chinese version)
(success, I could see superuser process in the apps)
3. Unlocked bootloader using the fastmode as mentioned in Sony's website.
4. Downloaded the CM9.1 nozomi from CM website and Gapps from another website and copied to the root of the internal memory (Xperia doesn't have memory card ?)
5. Installed CWM recovery (6.0.3 ?) using Recover X
6. Flashed CM kernal from the CM9.1 nozomi zip (boot.img) using flashtool 0.9.11
7. Backed up the existing data using CWM.
8. Flashed CM9.1 nozomi using CWM and then Gapps. Factory reset and Cache clear.
9. Stuck at FreeXperia logo
10. Gone to CWM and restored the backup but it gave an error with "can't format with mkextf4 /dev/block/mmcblk3322 (or something like that)
11. Stuck at XPERIA logo (animation)
12. Installed the CM9.1 and Gapps and then factory reset, cache reset and Dalvik cache clear (when I press on "clear Dalvik Cache", I don't see any message in the log btw)
13. Stuck at CM9.1 Robot animation (the matrix ?)
Please help guys...its my only phone and I'm a busy guy regarding phone calls and emails
Thanks for reading
Does flashing a different kernal a good idea ?
Where did you download your cm? FXP or CM official website? You can fix it by flashing stock firmware using flashtool.
AndroidNoob69 said:
Where did you download your cm? FXP or CM official website? You can fix it by flashing stock firmware using flashtool.
Click to expand...
Click to collapse
Yeah, CM official website !
So, should I just download the stock firmware.zip and flash it with recovery or I have to download the .ftf file ?
I flashed the Pure ICS kernal but its stuck at the "Pure ICS kernal" logo.
What should I do now ?
Download the stock firmware ftf and flash it ?
From where I can get the kernal for the stock firmware?
Thanks bro for the reply !
x.marX said:
Yeah, CM official website !
So, should I just download the stock firmware.zip and flash it with recovery or I have to download the .ftf file ?
I flashed the Pure ICS kernal but its stuck at the "Pure ICS kernal" logo.
What should I do now ?
Download the stock firmware ftf and flash it ?
From where I can get the kernal for the stock firmware?
Thanks bro for the reply !
Click to expand...
Click to collapse
The stock ftf includes kernel so don't worry. Flash the stock ftf and report the results.
AndroidNoob69 said:
The stock ftf includes kernel so don't worry. Flash the stock ftf and report the results.
Click to expand...
Click to collapse
Copy that !
But, what to do after that ?
I mean, I wanted to run the CM 9.1 for increased battery backup...what do I do now ?
x.marX said:
But, what to do after that ?
I mean, I wanted to run the CM 9.1 for increased battery backup...what do I do now ?
Click to expand...
Click to collapse
Flash, root, redownload the rom and stock cm kernel, and try again.
AndroidNoob69 said:
Flash, root, redownload the rom and stock cm kernel, and try again.
Click to expand...
Click to collapse
I have checked the md5 sum...which matches with that in the CM website.
Is there any other ROM with good battery backup ?
Man ! I hate this
I have installed the drivers from the driver folder in the flashtool but when I connect my mobile in flashmode (green led), the add hardware wizard pops up and within 2 seconds, the phone boots up freezing the system.
The flashtool displays an error saying "install drivers".
I have installed all drivers using flashtool's driver installer but why does it still say its not installed ?
Are you using windows 8?
You have a locked bootloader?... CM9 won't work on a locked bootloader
Sent from my LT26i using xda app-developers app
amey_gangal said:
You have a locked bootloader?... CM9 won't work on a locked bootloader
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
Its unlocked
AndroidNoob69 said:
Are you using windows 8?
Click to expand...
Click to collapse
No, windows XP
AndroidNoob69 said:
Its unlocked
Click to expand...
Click to collapse
Yup !
BTW, I tried another system with more updated Windows where I could install the driver using hardware wizard successfully but the flashtool gives an another error now and the phone boots up.
Didn't note the error down...gonna do it again to see what it says !
EDIT:
Can I use fastboot mode instead of flash mode in the flashtool ?
Now, it doesn't even recognize the phone....I mean, even if I connect it in flash mode (green led), the flashtool doesn't start the flashing
EDIT:
Is there any way I could access its memory ?
I'm thinking about downloading a stock ROM and kernal and flash it using CWM.
A miracle has happened!!
I could flash the firmware successfully., thanks JZ
Now I'm wondering whether I should go ahead and flash the cm9.1 again!!

[Q] Sony xperia Lt18i Bootloop big problem

Hey guys so I'm in boot loop. Yes I know there are many guides all over saying how to fix it but I have tried many of them and they didnt work.
What happens is I start the phone, it shows the boot image and then restarts after a time.
I can boot into the Recovery mode by spamming the back button when the Logo comes. And can install zip files from the SD card.
I also have tried flashtool to restore it to stock but when i try flashing it detects my device "Device connected in flash mode" but when i try toflash it, it gives an error "Error flashing. Aborted".
I tried many many room whit kernels but stuck on bootloop every time, no way. I have never seen this problem before. Maybe bricked bootloader ?
I tried to relock the bootloader but doesnt help either.
Any help?
Ok, since you can boot into recovery can you flash you ROM.zip and try to boot into ROM? I also need some details:
- ROM you were using
- Kernel you were using
- How you got bootloop
Flashtool should work, try to recover using flashtool.
僕のLT18iから送られてきた
popthosegaskets said:
Ok, since you can boot into recovery can you flash you ROM.zip and try to boot into ROM? I also need some details:
- ROM you were using
- Kernel you were using
- How you got bootloop
Flashtool should work, try to recover using flashtool.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Before this happened i was using Ultimate HD 4.0 and Vengeance kernel ayame. The telephone was crashed and i didnt any backup. I tried to upgrade it to android 4.2 or 4.1 and the probleme begin I relocked the bootloader but doesnt help. I flashed it but doesnt accept any firmware, show Error flash bla bla bla Flash aborted. tried almost roms and kernels but doesnt help. I can install rooms and flash kernels, and boot up to recovery but after that is just stuck on boot animation or bootloop.:crying::crying::crying:
During the upgrade to JB, did you flash the kernel that came with it?
I assume you wanted to update to CM10/10.1? Vengeance Kernel is not compatible with JB. You need to flash UHD4 back to /system partition if you want to stick with UHD or flash the boot.img that came with the JB ROM.zip.
Do a clean install. Your phone should be working again if you do the steps correctly.
If you still have problems, you can reply to this thread or send me a PM if you wish to be more private about it.
Regards, 日焼けさん.
僕のLT18iから送られてきた
popthosega-skets said:
During the upgrade to JB, did you flash e ä'ökernel that came with it?
I assume you wanted to update to CM10/10.1? Vengeance Kernel is not compatible with JB. You need to flash UHD4 back to /system partition if you want to stick with UHD or flash the boot.img that came with the JB ROM.zip.
Do a clean install. Your phone should be working again if you do the steps correctly.
If you still have problems, you can reply to this thread or send me a PM if you wish to be more private about it.
Regards, 日焼けさん.9
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Thank you very much but i need steps . Plzz
Best regards
popthosegaskets said:
During the upgrade to JB, did you flash the kernel that came with it?
I assume you wanted to update to CM10/10.1? Vengeance Kernel is not compatible with JB. You need to flash UHD4 back to /system partition if you want to stick with UHD or flash the boot.img that came with the JB ROM.zip.
Do a clean install. Your phone should be working again if you do the steps correctly.
If you still have problems, you can reply to this thread or send me a PM if you wish to be more private about it.
Regards, 日焼けさん.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Sorry but i want tell you that the last i tried is this but doesnt help, stuck on boot animation. I gone be crazy.
OBS !!!!!! When i install rom and not working whit me i look on SD on pc if the installation files are there but nothing just the rom zip. I changed the SD but the same happened
Having issues realted to this one. Here's my device info. Hope it helps.
Device:
-> never been modded.
-> all stock rom.
-> stuck on a bootloop due to bluetooth.
It doesn't even have a recovery mod. So I'm pretty much stuck.
Can you help me out? And another thing, sorry for bringing this
old topic back. Haha.

Q) Xperia S l26i rooted,unlocked bootloader. Now stuck in bootloop. Please HELP

Hi Everyone,
I wanted to install custom recovery in my Sony Xperia S L26ii , So rooted it a week ago. It is rooted for sure., I installed titanium backup and backed up everything. Yesterday I did unlock my bootloader so that I can install a custom recovery and custom rom. I followed the procedure of official way of unlocking bootloader by getting the key and unlocked it using fastboot command.
Till This everything works fine.I could boot into my device.
I flashed Twrp recovery adb fastboot. After this I wanted to backup my Stock rom. While I try to perform backup i got an error "unable to mount data" and it was unsucessfull.
I tried to reboot the system and shocked that it is stuck in boot loop now. I am seeing the word "Sony " and again it is rebooting,
I tried whatever I can by browsing internet. It seems I cannot use pc companion since I unlocked bootloader and installed custom recovery.
i tried to download tft file from somewhere and tried to flash through flashtools and got an error "ERROR - Processing of loader.sin finished with errors."
Dont know what to do. Any help would be highly appreciated. All I could access is TWRP recovery . currently I powered off the phone.
Please help me in the right direction.
Regards,
Suresh
ssuresh005 said:
Hi Everyone,
I wanted to install custom recovery in my Sony Xperia S L26ii , So rooted it a week ago. It is rooted for sure., I installed titanium backup and backed up everything. Yesterday I did unlock my bootloader so that I can install a custom recovery and custom rom. I followed the procedure of official way of unlocking bootloader by getting the key and unlocked it using fastboot command.
Till This everything works fine.I could boot into my device.
I flashed Twrp recovery adb fastboot. After this I wanted to backup my Stock rom. While I try to perform backup i got an error "unable to mount data" and it was unsucessfull.
I tried to reboot the system and shocked that it is stuck in boot loop now. I am seeing the word "Sony " and again it is rebooting,
I tried whatever I can by browsing internet. It seems I cannot use pc companion since I unlocked bootloader and installed custom recovery.
i tried to download tft file from somewhere and tried to flash through flashtools and got an error "ERROR - Processing of loader.sin finished with errors."
Dont know what to do. Any help would be highly appreciated. All I could access is TWRP recovery . currently I powered off the phone.
Please help me in the right direction.
Regards,
Suresh
Click to expand...
Click to collapse
It is the "ftf" file, not "tft". Try Flashing the stock ftf file immediately again after You get the error, it will work. You get the error first time.
Mirhawk said:
It is the "ftf" file, not "tft". Try Flashing the stock ftf file immediately again after You get the error, it will work. You get the error first time.
Click to expand...
Click to collapse
Thank you bro for replying and correcting me. Yes ftf file. I am downloading stock ftf from XDA forum (thanks for the member) and Will try to flash it (by pressing volume down and connecting usb cable to it) and will let you know.
Im just wondering , yesterday when I saw the phone in bootloop , I paniked and try to perform factory reset couple of times . Though it did not help in anyway. Will it disable usb debugging? If so is there any way we can reenable it from recovery or any other way?
-Suresh
ssuresh005 said:
Thank you bro for replying and correcting me. Yes ftf file. I am downloading stock ftf from XDA forum (thanks for the member) and Will try to flash it (by pressing volume down and connecting usb cable to it) and will let you know.
Im just wondering , yesterday when I saw the phone in bootloop , I paniked and try to perform factory reset couple of times . Though it did not help in anyway. Will it disable usb debugging? If so is there any way we can reenable it from recovery or any other way?
-Suresh
Click to expand...
Click to collapse
Nah it won't affect You while flashing the ftf file. You can always flash the ftf file using flashtool by fastboot, no matter what.
Mirhawk said:
Nah it won't affect You while flashing the ftf file. You can always flash the ftf file using flashtool by fastboot, no matter what.
Click to expand...
Click to collapse
Bro, You are great. That worked. It did revoked my root and locked bootloader though. But that is fine. I could do root and unlock the bootloader again..
A quick question. It all happened when I flashed TWRP recovery in this phone using this link (http://techglen.com/2014/02/12/install-twrp-custom-recovery-on-xperia-s-lt26i-nozomi/2/). I have already flashed TWRP in another HTC but it never caused this issue.
Is there any issue in installing TWRP in xperia sl ?
Should I use only CWM recovery?
If i can use Twrp , is there any good way/post or steps you recommend.?
Many Thanks again:good:
-Suresh
ssuresh005 said:
Bro, You are great. That worked. It did revoked my root and locked bootloader though. But that is fine. I could do root and unlock the bootloader again..
A quick question. It all happened when I flashed TWRP recovery in this phone using this link (http://techglen.com/2014/02/12/install-twrp-custom-recovery-on-xperia-s-lt26i-nozomi/2/). I have already flashed TWRP in another HTC but it never caused this issue.
Is there any issue in installing TWRP in xperia sl ?
Should I use only CWM recovery?
If i can use Twrp , is there any good way/post or steps you recommend.?
Many Thanks again:good:
-Suresh
Click to expand...
Click to collapse
Weird. It should not lock Your bootloader, since locking bootloader has different procedure. Anyways, TWRP works fine with Xperia SL. Even My phone is a SL and I always use twrp. Which version where You using of twrp? Use this version. And flash it using the command by connecting Your phone in fastboot mode:
Code:
fastboot flash boot openrecovery-twrp-2.8.0.1-LT26i.img
Mirhawk said:
Weird. It should not lock Your bootloader, since locking bootloader has different procedure. Anyways, TWRP works fine with Xperia SL. Even My phone is a SL and I always use twrp. Which version where You using of twrp? Use this version. And flash it using the command by connecting Your phone in fastboot mode:
Code:
fastboot flash boot openrecovery-twrp-2.8.0.1-LT26i.img
Click to expand...
Click to collapse
Bro. I flashed this recovery and now after reboot phone is going to recovery only. I manually tried to reboot it to bootloader and it is getting to TWRP recovery only. I tried to flash a Kitkat rom which was in my internal memory as zip file it failed with error " error executing updater binary in zip" did google search on it and got to know to overcome this error I had to be on TWRP 2.8.0.1 but we are already in that code, I dont know why I was still getting that error.
So I used the ftf file again to flash . I followed the forum "http://forum.xda-developers.com/showpost.php?p=28305266&postcount=3" to get the ftf file. I could see there are ftf for ginger bread and ICS , but I could only flash Ginger bread since I am getting error when I flash ICS ftf. not sure why.
Now having stock Ginger Bread rom rooted and bootloader unlocked.
I am happy that you brought me this far. It Would be great if you could guide me to proceed further to install any custom recovery and any custom rom of Jelly bean and higher. :good:
- Suresh
I also wanted to try something before you come online . so flashed the custom recovery which you have provided and flashed cyanogenmod 9 latest nightly and current status is
Rooted, bootloader unlocked, installed custom recovery(TWRP){with your wonderful assistance} , flashed cyanogenmod 9 nightly(ICS)
All I need now is a jelly bean rom or KITKAT rom (preferable )
ssuresh005 said:
All I need now is a jelly bean rom or KITKAT rom (preferable )
Click to expand...
Click to collapse
My Bad, that procedure installs a Kernel, and since it was not compatible with the ROM You were using, it only booted to the twrp. Copy the file to Your internal sdcard and use these following commands on Terminal Emulator app from playstore:
Code:
su
dd if=/sdcard/fotakernel.img of=/dev/block/mmcblk0p11
where fotakernel.img is the name of Your .img file.
It was weird that You go that error while flashing a Kitkat ROM. Which ROM were You trying to flash? If You wan to flash a Kitkat ROM, then follow the procedure here, no matter which Android version You are on, no need to do anything else.

Categories

Resources