Develop Bugs

Totally Depressed : My Xperia Play is Stuck at Sony Ericsson Text at Boot Screen !

Hello Everyone
I tried to find a solution without troubling anyone, so I searched a lot and a lot of threads all over the internent with no hope . I have tried as many possiblesolutions as I could find even those which are not meant for xperia play. I will explain everythingvery clearly for those who want to help or even try to ...
The Problem :
My Xperia Play suddenly doesn't get pass the Sony Ericsson text at the boot screen which appearsas soon as you turn on the device. It keeps hanging on that white text on that black background for hours until I pull out the battery . I then found out that if I connect my charger before turning on the device it will boot normally as usual . I also found out that as soon as I disconnect the charger cable , the phone will immediately turn off. Another important issue is that even when I mamange to boot the phone normally by the charger , the screen does not respond to my touch even in CWM touch recovery in Doomkernel . Despite that , I can operate the phone completely using the key pad . That means the phone is full functional except for the " boot " and " touch " problems.
What I have done so far :
- I flashed different stock firmware FTF several time via Flash Mode including .42 , .58 enhanced , and .62 using flashtool with flashing ending in success each and everytime .
- I flashed different kernels via Fastboot Mode including DoomlordKernel v14 (GB ) , DoomlordKernel v3 ( ICS ) , and Lupusv11 ( ICS)
- I have accessed CWM recovery serveral times and formated each and everything that could be formatted including data , system , cache ..etc
- I have also tried flashing different ROMs such as NXT 1.3 and Markpython XPlay ICS
- I have put phone in a rice bag in case it had moister or water damage !
- I have disassemble the phone completelypart by part and found nothing damaged so I cleaned it and ressambeled it again
- I have left the phone for days without turning it on . I also tried keeping the battery out for several hours.
- I have used a replacement new battery just in case it was my battery has a problem.
- I relocked my bootloader and repaired my phone via Sony Update Service and the repairing process endedin success.
The results so far :
Nothing changed at all . After doing all of the above and repeating it. I even did more things I can't remember now.Everything is still the same. The phone is stuck at SE text at boot screen and if connected to charger then turned on it will boot normally but the touch screen doesn't respond for some reason I can't figure out , although the digitizer is intact.
What I am doing now :
- I have no more trick to try and I am totally depressed about this ZOMBIE Xperia Play which is half working and half borken.
Thank you very much for your time and for trying to help
I am waiting for your suggestions ...

For your touch screen problem, I doubt that the digitizer is damaged. As for your booting issue, I'm not sure.

looks like the battery doesn't give enough power to the phone

jeff7424 said:
For your touch screen problem, I doubt that the digitizer is damaged. As for your booting issue, I'm not sure.
Click to expand...
Click to collapse
Maybe it is invisabely damaged . However, if I can't fix my boot issue , getting a replacement digitizer is just a waste of money.
nickholtus said:
looks like the battery doesn't give enough power to the phone
Click to expand...
Click to collapse
I tried using a new battery the other day at the phone's shop and the same thing happened . The phone just
doesn't continue to boot and get stuck at Sony Ericsson text.

nickholtus said:
looks like the battery doesn't give enough power to the phone
Click to expand...
Click to collapse
The power turns on and the screen turns on when the I power the device. The problem is booting into the system.
It get stuck at Sony Ericsson text . However, it's very mysterious why the phone turns off when the charger is disconnected , perhaps the real question is : how come the battery powers the device but can not boot it and keep it running ?

You didn't say what version is your xperia play is. Is it R800x, R800i, R800a, R800at? If you have the xperia play CDMA version you cant use GSM kernel or roms.

I dropped my phone (after replacing the housing) and had the same thing happen to me. Opened it up again and the digitizer cable was loose. Fixed it for me.
EDIT- My phone would turn on without the need of the cable, but i couldnt mount my sd card/enter mtp unless i connected the usb cable prior to turning it on (so my issue was slightly different).

chery2k said:
You didn't say what version is your xperia play is. Is it R800x, R800i, R800a, R800at? If you have the xperia play CDMA version you cant use GSM kernel or roms.
Click to expand...
Click to collapse
It's R800i , and it is used to work normally. I also tried stock kernel and nothing changes ... the problem persists.
Thanks for trying to helo.
Nabeel_Nabs said:
I dropped my phone (after replacing the housing) and had the same thing happen to me. Opened it up again and the digitizer cable was loose. Fixed it for me.
EDIT- My phone would turn on without the need of the cable, but i couldnt mount my sd card/enter mtp unless i connected the usb cable prior to turning it on (so my issue was slightly different).
Click to expand...
Click to collapse
I already opened up my device and disconnected the digitizer cable and reconnected it and the touch was
still not working but I'll try it again as soon as I fix my boot issue. The phone doesn't boot to the system
unless connected to the charger prior to turning it on.

my phone is only 6 months old ... It runs perfectly when connected to charger but as soon as I disconnect it the phone turns off ... using a new battery doesn't solve the problem ... what could it be that causing this ?!

Final Solution to your problem
You will have to use odin. Just connect it to a laptop/desktop and run Odin. It will fix your problem and if this doesnt work you will have to send it to a Sony centre in your neighborhood. But I am sure odin will fix it. I had a similar problem once. So try odin.
Click thanks if you appreciate this
Download link to odin http://www.android.gs/download-odin-3-07/

Xperia Gamer said:
You will have to use odin. Just connect it to a laptop/desktop and run Odin. It will fix your problem and if this doesnt work you will have to send it to a Sony centre in your neighborhood. But I am sure odin will fix it. I had a similar problem once. So try odin.
Click thanks if you appreciate this
Download link to odin http://www.android.gs/download-odin-3-07/
Click to expand...
Click to collapse
I never used this program before . I thought it was flashtool equivalent for samsung phones. I guess I was wrong. I really appreciate your help . Could you please explain more about the process. Give me steps to follow... Thank you very much I really appreciate your great help.

I'm pretty sure Odin is only for Samsung phones as the phone has to be in "download mode" for anything to work and well Sony devices don't have a download mode
sent from my Sony Ericsson Xperia Play™ Running Slimbean 3.0 using Tapatalk 2™

crazymonkey05 said:
I'm pretty sure Odin is only for Samsung phones as the phone has to be in "download mode" for anything to work and well Sony devices don't have a download mode
sent from my Sony Ericsson Xperia Play™ Running Slimbean 3.0 using Tapatalk 2™
Click to expand...
Click to collapse
Odin is only for Samsung phones, and I'm having an issue quite similar with my Play R800at. I just got it from a friend. It boots, continues up to ATT screen, then resets. I can't figure out how to boot into recovery, I can't find flashtool, I'm completely lost. I should have stuck with my S3.

powerfries said:
Odin is only for Samsung phones, and I'm having an issue quite similar with my Play R800at. I just got it from a friend. It boots, continues up to ATT screen, then resets. I can't figure out how to boot into recovery, I can't find flashtool, I'm completely lost. I should have stuck with my S3.
Click to expand...
Click to collapse
Well Sony xperia devices don't have a stock recovery...so it should go into fast boot if you take the battery out and hold search on the phone,plug the USB into the PC and the phone led should turn blue and bam your in fast boot
sent from my Sony Ericsson Xperia Play™ Running Slimbean 3.0 using Tapatalk 2™

I did fix the boot loop issue. If you download the Sony pc companion, hold the back button and plug the usb in at the same time, it will download a repaired version of the latest firmware and fix the boot loop.
Sent from my R800at using xda app-developers app

Just wondering but did anyone solve the initial issue as the same thing has happened to my xperia r800i

1. Flash ftf with flashtool
2. Flash gb/ics/jb kernel
3. Flash gb/ics/jb rom via the kernel recovery
It should do it but kernel has to match the ROM.
Example: if i want to flash jb rom then I have to flash jb kernel.
Sent from my R800i using xda app-developers app

The flashtool gets stuck on 2 percent how do I fix it?

Odp: Totally Depressed : My Xperia Play is Stuck at Sony Ericsson Text at Boot Screen
Try to flash it again.
Sent from my R800i using xda app-developers app

Update to latest flashtool then flash it.

[Q] R800i completely bricked?

Hello dear readers and great XDA members,
Last summer I unlocked the bootloader of my Xperia Play R800i with the testpoint method. Everything worked fine: I installed CWM and loaded a FreeXperia version of CyanogenMod 9.1.
A couple of days ago, I wanted to finally update my ROM to a newer version since there had been so many releases since last summer. I loaded the new ROM and everything worked fine. However, some of the problems I hoped would've been solved by the update, weren't solved at all, especially the video capturing and panorama pictures. So I decided it maybe would be better to flash a new kernel.
I searched for a kernel, but couldn't find anything I liked. Then, I can't remember where, someone posted the "boot.img" files included in the FreeXperia CM9 ROM zip packages were kernel releases. So I decided to use flashtool and flash the boot.img as a new kernel.
This obviously didn't work and I tried some others. By the way: I couldn't boot into ClockWorkMod anymore since I tried to flash a new kernel. Only fastboot and flashmode would work.
I couldn't remember which kernel I used last summer, so I wandered the internet and eventually found that an X10 kernel was included in Flashtool. I though I remembered something about X10 from last summer, so I decided to stupidly flash that kernel to my Xperia Play.
After this flash completed, my phone doesn't respond to anything anymore. Following a list of things I tried (everytime after I tried something, I removed the USB cable and the battery to make sure the Xperia Play was turned off):
- When I press and hold the power button, nothing happens, not even the small vibrate always felt when the phone starts.
- Getting into fastboot mode doesn't work anymore (I tried with holding the search button and connecting USB, as well as some other buttons, nothing worked.)
- Getting into flashmode doesn't work either.
- No matter what I do, the phone won't give me a sign it's still alive. (no LED, no vibrate, no screen, nothing.)
- I tried the Sony Update Service, but that obviously doesn't recognize the phone
- Flashtool doesn't recognize the phone either.
- ADB doesn't recognize the phone of course.
- s1tool (the tool I used for the TestPoint bootloader unlock) recognizes I plug something in, but then gives an error it can't get access to it.
- I charged the battery overnight and tried all of the above again... still nothing works...
- When I plug in the phone to the PC, my PC recognizes something plugged in, but with the name QHSUSB_DLOAD in Device Manager.
(by the way: I am using Windows 8 Pro x64)
Is this phone completely dead or is there any way it can be saved? I was planning on keeping this phone at least until the end of 2013 or begin of 2014 before upgrading... An immediate upgrade is not in my budget and for now I have returned to my Nokia 5530 on Symbian, but that's nothing compared to Android :'(
Thank you very much in advance... I really hope someone can save my poor phone. I know I have been stupid, but I think I somehow panicked when I couldn't get the phone back into CWM and stupidly flashed the X10... Stupid stupid me.

Well I always update to the latest working kernel when I flash a new rom. The one working currently for me is fxp152 kernel.
Have you tried with battery, holding the search button, plug it in, then hold the Power button while still holding search.
Contact Alejandrissimo, he can probably help you.
Sent from R800at

eksasol said:
Well I always update to the latest working kernel when I flash a new rom. The one working currently for me is fxp152 kernel.
Have you tried with battery, holding the search button, plug it in, then hold the Power button while still holding search.
Contact Alejandrissimo, he can probably help you.
Sent from R800at
Click to expand...
Click to collapse
Thank you for the response! Where do you find these kernels? Are those boot.img files included with fxp zip files the kernel images?
I hadn't tried to hold the power button after holding search button + plugging it in, but it doesn't work either
I will probably contact Alejandrissimo in a couple of days if I can't solve it myself or if nobody else can help me solve it...
Thank you!

same boat
ThirtyOne34 said:
Thank you for the response! Where do you find these kernels? Are those boot.img files included with fxp zip files the kernel images?
I hadn't tried to hold the power button after holding search button + plugging it in, but it doesn't work either
I will probably contact Alejandrissimo in a couple of days if I can't solve it myself or if nobody else can help me solve it...
Thank you!
Click to expand...
Click to collapse
Hi, i have the exact same problem. Is there anything that can be done ... phone is totally dead, and everything is the exact same as you mentioned..
thanks
Tommy

try this it works
tommyforest123 said:
Hi, i have the exact same problem. Is there anything that can be done ... phone is totally dead, and everything is the exact same as you mentioned..
thanks
Tommy
Click to expand...
Click to collapse
Pull the battery out put it in close the cover plug usb then hold power button and flashtool from androxide should detect it.

Qshusb error
Hi,
Can anyone help. Basically my phone is hard bricked. No logo, no flashmode or fastboot recovery. Totally dead. When i connect to pc - I get QSHUSB DLOAD error, the pc wont recognise my phone. I have tried flashtools but, I cant enter into flashmode ( holding down back while connecting usb...I know how to fix it if i can get my phone back into a softbrick.( getting the sony logo - being able to enter flashmode )..anybody have any ideas please. I have searched online for days with no answer. Xperia play 1 week old running 2.3.4. - i tried to install ics 4.0.4 gamer rom but pressed the flash x10 rom in flashtools by mistake ...

Rmontoya83 said:
Pull the battery out put it in close the cover plug usb then hold power button and flashtool from androxide should detect it.
Click to expand...
Click to collapse
You clearly have no idea what you are talking about. i have read you say this over and over again and yet it doesn't work. you need to press back not power.

tommyforest123 said:
Hi, i have the exact same problem. Is there anything that can be done ... phone is totally dead, and everything is the exact same as you mentioned..
thanks
Tommy
Click to expand...
Click to collapse
tommyforest123 said:
Hi,
Can anyone help. Basically my phone is hard bricked. No logo, no flashmode or fastboot recovery. Totally dead. When i connect to pc - I get QSHUSB DLOAD error, the pc wont recognise my phone. I have tried flashtools but, I cant enter into flashmode ( holding down back while connecting usb...I know how to fix it if i can get my phone back into a softbrick.( getting the sony logo - being able to enter flashmode )..anybody have any ideas please. I have searched online for days with no answer. Xperia play 1 week old running 2.3.4. - i tried to install ics 4.0.4 gamer rom but pressed the flash x10 rom in flashtools by mistake ...
Click to expand...
Click to collapse
Hi Tommy,
I am very sorry for my late response. I haven't fixed my phone yet, but I fear only a hardware flash would work... I think I am going to try to get my phone back to the store where I bought it and I hope they'll fix it. If they don't, I will try to find someone who can hardware flash or ask Allejandrissimo (an Xperia bricked devices expert, it seems...)
I hope you will get your phone to work again! (And please let me know how you did it if you succeed). I will keep you updated if there is any progress. I am very busy at the moment though, so I don't know when I can get my phone back to the store. In the meantime, I have also bought a used Galaxy Nexus...
Greetings,
Sven
EDIT: I think I also accidentally flashed the X10 rom or kernel in the flashtool...

Could be easily fixed by flashtool, tried the same (flashing x10) and phone looked dead. The I toke the battery out and placed it back. Then I could enter flashmode and flash a stock ftf.
Sent from my LT22i using xda app-developers app

nickholtus said:
Could be easily fixed by flashtool, tried the same (flashing x10) and phone looked dead. The I toke the battery out and placed it back. Then I could enter flashmode and flash a stock ftf.
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
Well, the problem is we can't enter flashmode or fastboot... Really no life to it...
But thanks for the input!

hi guys, ive rooted n unlock boot loader for my friend xperia PLAY with android 2.3.3 stok, after 2days he update his phone to 2.3.4..... now his phone did not reboot.. i can not set the phone to fastboot, only flashboot... then i try to falsh ftf.. when i try to reboot, only vibrate but no screen boot n green LED on the start button...can anybody help??.. sorry for my english..

ThirtyOne34 said:
Hello dear readers and great XDA members,
Last summer I unlocked the bootloader of my Xperia Play R800i with the testpoint method. Everything worked fine: I installed CWM and loaded a FreeXperia version of CyanogenMod 9.1.
A couple of days ago, I wanted to finally update my ROM to a newer version since there had been so many releases since last summer. I loaded the new ROM and everything worked fine. However, some of the problems I hoped would've been solved by the update, weren't solved at all, especially the video capturing and panorama pictures. So I decided it maybe would be better to flash a new kernel.
I searched for a kernel, but couldn't find anything I liked. Then, I can't remember where, someone posted the "boot.img" files included in the FreeXperia CM9 ROM zip packages were kernel releases. So I decided to use flashtool and flash the boot.img as a new kernel.
This obviously didn't work and I tried some others. By the way: I couldn't boot into ClockWorkMod anymore since I tried to flash a new kernel. Only fastboot and flashmode would work.
I couldn't remember which kernel I used last summer, so I wandered the internet and eventually found that an X10 kernel was included in Flashtool. I though I remembered something about X10 from last summer, so I decided to stupidly flash that kernel to my Xperia Play.
After this flash completed, my phone doesn't respond to anything anymore. Following a list of things I tried (everytime after I tried something, I removed the USB cable and the battery to make sure the Xperia Play was turned off):
- When I press and hold the power button, nothing happens, not even the small vibrate always felt when the phone starts.
- Getting into fastboot mode doesn't work anymore (I tried with holding the search button and connecting USB, as well as some other buttons, nothing worked.)
- Getting into flashmode doesn't work either.
- No matter what I do, the phone won't give me a sign it's still alive. (no LED, no vibrate, no screen, nothing.)
- I tried the Sony Update Service, but that obviously doesn't recognize the phone
- Flashtool doesn't recognize the phone either.
- ADB doesn't recognize the phone of course.
- s1tool (the tool I used for the TestPoint bootloader unlock) recognizes I plug something in, but then gives an error it can't get access to it.
- I charged the battery overnight and tried all of the above again... still nothing works...
- When I plug in the phone to the PC, my PC recognizes something plugged in, but with the name QHSUSB_DLOAD in Device Manager.
(by the way: I am using Windows 8 Pro x64)
Is this phone completely dead or is there any way it can be saved? I was planning on keeping this phone at least until the end of 2013 or begin of 2014 before upgrading... An immediate upgrade is not in my budget and for now I have returned to my Nokia 5530 on Symbian, but that's nothing compared to Android :'(
Thank you very much in advance... I really hope someone can save my poor phone. I know I have been stupid, but I think I somehow panicked when I couldn't get the phone back into CWM and stupidly flashed the X10... Stupid stupid me.
Click to expand...
Click to collapse
Maybe you still have a chance! Bcoz I think you have completely damaged ta files+ semcboot which can only be repaired by se toolbox 3 which requires credits(money)( I m assuming it'll detect phone bcoz s1 tool recognized it with error ) if you have it than you can repair it or you can contact alejandressimo on gtalk.
Sent from my R800i using xda premium

creative_md said:
Maybe you still have a chance! Bcoz I think you have completely damaged ta files+ semcboot which can only be repaired by se toolbox 3 which requires credits(money)( I m assuming it'll detect phone bcoz s1 tool recognized it with error ) if you have it than you can repair it or you can contact alejandressimo on gtalk.
Sent from my R800i using xda premium
Click to expand...
Click to collapse
Really?! I really hope it'll work. I have a Galaxy Nexus now, but I desperately need a Gingerbread for testing my apps again...
Thank you!

Finally some one who has fixed a bricked phone
nickholtus said:
Could be easily fixed by flashtool, tried the same (flashing x10) and phone looked dead. The I toke the battery out and placed it back. Then I could enter flashmode and flash a stock ftf.
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
When you phone was dead after you put the battery in did you hold the power button then it went in to fast boot instead of holding thback button CORRECT? ²
---------- Post added at 05:19 PM ---------- Previous post was at 05:08 PM ----------
ThirtyOne34;38604501 01 said:
Really?! I really hope it'll work. I have a Galaxy Nexus now, but I desperately need a Gingerbread for testing my apps again...
Thank you![/QUOTE
Message me in myinbox and I will give you # so I can walk you through it. I have bricked my phone many time and a lot of people will tell you I'm wrong. But I'm right all I ask is that you reply to this tread and post that I know how to fix bricked phones.
Click to expand...
Click to collapse

Hello I have the same your problem, are you by any chance managed to solve it? I have sent you to the sony center and have called irreparable ._. If it is true that Alejandro can fix it I wonder what may be the relevant industry professionals sony

Arbiterandrea said:
Hello I have the same your problem, are you by any chance managed to solve it? I have sent you to the sony center and have called irreparable ._. If it is true that Alejandro can fix it I wonder what may be the relevant industry professionals sony
Click to expand...
Click to collapse
Hello Arbiterandrea,
I am very sorry tot report that I wasn't able to fix my Xperia Play. I sent my phone back to the online store I bought it from and it arrived there 1 day before my guarantee expired. When I got my phone back, it was a brand new one with a different serial number, no screen protector, not a scratch. And it was for free thanks to my guarantee, even though I bricked it myself. (I just told them "it suddenly stopped working")
If you've got any guarantee left, you could try that, but if I understand correctly you already tried that... Then I think you should contact Allejandrissimo, I've heard many good things about him. I didn't contact him myself, though.
Good luck! And let me know if you have fixed it?
Greetings
ThirtyOne34

Used Xperia Play home button help

Hi
Just bought a used Xperia Play. Turns out the thing is already rooted and when they factor reset it, it developed the non-working home button bug. And advice for fixing this?
Thanks.

overhaze said:
Hi
Just bought a used Xperia Play. Turns out the thing is already rooted and when they factor reset it, it developed the non-working home button bug. And advice for fixing this?
Thanks.
Click to expand...
Click to collapse
try to flash it with stock firmware...

I've got bigger issues now. I used flash tool the flash the latest official uk firmware. Process went find but the phone will now not boot. No light no flashmode nothing. If I plug it into my computer it is detected as a usb device but driver install fails. Is the phone now completely dead?

Although i can not say that your phone is DEAD because your computer detects it. You can install the drivers directly from Flashtools. Navigate to the folder and execute the .exe to install the drivers and then try and start over. C:/Flashtool/drivers

[Q] Bootloop and not working Volume Rocker - Any Solution?

Hey Guys
I really could need a good Advise. In the past my USB-Port was broken, so i repaired it with a new one, anyway i wasnt careful enough - i pulled of the Volume-Rockers' Connector. There are no contacts left on the Mainboard, so i cant easily install some new Volume Rockers.
Well that wasnt a big Problem for me so far, i just used a Volume-Widget instead. But unfortunately my Device is now stucking within a Bootloop.
Due to the missing Volume-Rocker, i cant access Fastboot or Recovery. I tried to access the Device with the GNex-Toolkit but it wont let me install the Drivers, i guess the Driver crashes within the Bootloop. Letting the Device Boot while connected via USB, wont recognize it as ADB-Device.
I am owning a Galaxy S4 now, but i would like to repair the GNex, so that my Gilfriend might use it. Any chance to access Fastboot Mode or Recovery without the Volume Rockers on a Bootlooping Device?
I allready downloaded the OMAPFlash_tuna Package and managed it to install the OMAP 4440 Driver (it is giving me 2 Seconds to install them when i plug in the powered-off Device). After a few attempts the Omap-Flash Bat-File was running properly. But the Device is still stuck in its Bootloop. Any Advices would be really great.
Best regards

apsis said:
Hey Guys
I really could need a good Advise. In the past my USB-Port was broken, so i repaired it with a new one, anyway i wasnt careful enough - i pulled of the Volume-Rockers' Connector. There are no contacts left on the Mainboard, so i cant easily install some new Volume Rockers.
Well that wasnt a big Problem for me so far, i just used a Volume-Widget instead. But unfortunately my Device is now stucking within a Bootloop.
Due to the missing Volume-Rocker, i cant access Fastboot or Recovery. I tried to access the Device with the GNex-Toolkit but it wont let me install the Drivers, i guess the Driver crashes within the Bootloop. Letting the Device Boot while connected via USB, wont recognize it as ADB-Device.
I am owning a Galaxy S4 now, but i would like to repair the GNex, so that my Gilfriend might use it. Any chance to access Fastboot Mode or Recovery without the Volume Rockers on a Bootlooping Device?
I allready downloaded the OMAPFlash_tuna Package and managed it to install the OMAP 4440 Driver (it is giving me 2 Seconds to install them when i plug in the powered-off Device). After a few attempts the Omap-Flash Bat-File was running properly. But the Device is still stuck in its Bootloop. Any Advices would be really great.
Best regards
Click to expand...
Click to collapse
i dont see a way to boot into fastboot mode without volume keys or adb
i suggest to get a usb jig and flash stock via odin

samersh72 said:
i dont see a way to boot into fastboot mode without volume keys or adb
i suggest to get a usb jig and flash stock via odin
Click to expand...
Click to collapse
Thanks mate, i really appreciate your Help. I'm sorry that im just answering so late, but i was waiting for my USB jig to arrive. I didnt knew that there is this Option with the USB Jig, i just want to let you know that everything went well, and my Galaxy Nexus is finally back to life.
Thanks for your fast reponse :good

[Q] Stuck in bootloop, Volume button broken, ADB not working

So by the heading you guys must know I have messed up pretty badly.
Let me tell you first, I have done my research. Tried each and every thing possible (AFAIK) but it just wont boot into recovery.
FLASHBACK: ( I have Sff) (Volume button is broken).
1) Did a clean wipe ( Cache, Dalvik, System),
2) Installed Ignorance V4, ( I thought the kernel must be in the zip, so didnt flash the kernel)
3) Phone booted and stuck in splashscreen. ( Ignorance)
4) Connected it to Laptop via USB. Checked ADB. Device not found.
5) Switched off device, connected to laptop, checked ADB, Device not found.
6) Checked through device manager, and device manager recognizes the phone. All drivers are installed and updated. Windows Vista.
Now, what to do? Is there any way I can get into recovery or even Hboot so that I can flash kernel?.
Need help
Owner of a messed up V.
Vickrant.

myhtconeV said:
So by the heading you guys must know I have messed up pretty badly.
Let me tell you first, I have done my research. Tried each and every thing possible (AFAIK) but it just wont boot into recovery.
FLASHBACK: ( I have Sff) (Volume button is broken).
1) Did a clean wipe ( Cache, Dalvik, System),
2) Installed Ignorance V4, ( I thought the kernel must be in the zip, so didnt flash the kernel)
3) Phone booted and stuck in splashscreen. ( Ignorance)
4) Connected it to Laptop via USB. Checked ADB. Device not found.
5) Switched off device, connected to laptop, checked ADB, Device not found.
6) Checked through device manager, and device manager recognizes the phone. All drivers are installed and updated. Windows Vista.
Now, what to do? Is there any way I can get into recovery or even Hboot so that I can flash kernel?.
Need help
Owner of a messed up V.
Vickrant.
Click to expand...
Click to collapse
Which recovery u have ??
If you have Cwm...Let ua battery drain completely and then put in on charge, it will boot into cwm directly. That's the only option.
If you have TWRP, lol..I'd Suggest you torepair your Vol Buttons

red de0392 said:
Which recovery u have ??
If you have Cwm...Let ua battery drain completely and then put in on charge, it will boot into cwm directly. That's the only option.
If you have TWRP, lol..I'd Suggest you torepair your Vol Buttons
Click to expand...
Click to collapse
Thanks for replying ya
Unfortunately I have TWRP. So my one v is going for repairs :crying::crying:. Still not given up...trying it on my other lappy, lets see if adb picks it up there.

myhtconeV said:
Thanks for replying ya
Unfortunately I have TWRP. So my one v is going for repairs :crying::crying:. Still not given up...trying it on my other lappy, lets see if adb picks it up there.
Click to expand...
Click to collapse
Don't Sweat too Much Mate. It Won't boot into recovery.
Well My Vol Buttons are Dying As well...Will flash CWM Now
We should Learn from other

red de0392 said:
Don't Sweat too Much Mate. It Won't boot into recovery.
Well My Vol Buttons are Dying As well...Will flash CWM Now
We should Learn from other
Click to expand...
Click to collapse
:good: what if i try that with mine?
Downloading HTC Sync Manager. Hope the updated drivers work. Called up my IT guy. He is giving me a quote on repairs tomorrow. Come to think of it, my one v was bound to end like this. Screen broken and shattered at 2 places, headphone jack socket gone, volume buttons gone.
Now upgrading to...........................wait for it............................ Nokia 1100.

myhtconeV said:
:good: what if i try that with mine?
Downloading HTC Sync Manager. Hope the updated drivers work. Called up my IT guy. He is giving me a quote on repairs tomorrow. Come to think of it, my one v was bound to end like this. Screen broken and shattered at 2 places, headphone jack socket gone, volume buttons gone.
Now upgrading to...........................wait for it............................ Nokia 1100.
Click to expand...
Click to collapse
Hahahah...That's a Beast

myhtconeV said:
So by the heading you guys must know I have messed up pretty badly.
Let me tell you first, I have done my research. Tried each and every thing possible (AFAIK) but it just wont boot into recovery.
FLASHBACK: ( I have Sff) (Volume button is broken).
1) Did a clean wipe ( Cache, Dalvik, System),
2) Installed Ignorance V4, ( I thought the kernel must be in the zip, so didnt flash the kernel)
3) Phone booted and stuck in splashscreen. ( Ignorance)
4) Connected it to Laptop via USB. Checked ADB. Device not found.
5) Switched off device, connected to laptop, checked ADB, Device not found.
6) Checked through device manager, and device manager recognizes the phone. All drivers are installed and updated. Windows Vista.
Now, what to do? Is there any way I can get into recovery or even Hboot so that I can flash kernel?.
Need help
Owner of a messed up V.
Vickrant.
Click to expand...
Click to collapse
Recently I have seen one interesting issue that might appear like solution to your problem. According to the description you may try turning off your phone and plugging in a charger. If you will have the same behaviour your phone should start into recovery mode. =)
Edited: Doh! TWRP...
You may try All-In-One-Kit as well. It has high level interface to run adb commands (including Boot into Recovery). Yeah yeah, I've seen your note that adb does not recognize your device, anyway...

Stupid answer from me....... Op are both your volume buttons broken?
Sent from my Nexus 7 using Tapatalk

heavy_metal_man said:
Stupid answer from me....... Op are both your volume buttons broken?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Yes.
I have given it for repairs.I have decided not to sell or dispose it.
Its only sometime before I buy a moto g or xperia device. Waiting for my new credit card :fingers-crossed:
which phone would you suggest?
Vickrant.

If you are good with 16gb storage better buy Moto G if not there are a few options like Xperia M , Canvas series and all..

Sorry to be so late to the party, but in case other people get this issue. ADB will often work just after the kernel finishes loading, before it gets shut off. So between the htc boot screen and when the boot anim starts you have a window to commit abd commands. I often use this to save time when flashing kernels etc, notably because my WIP roms rarely make it past bootanim!

red de0392 said:
Which recovery u have ??
If you have Cwm...Let ua battery drain completely and then put in on charge, it will boot into cwm directly. That's the only option.
If you have TWRP, lol..I'd Suggest you torepair your Vol Buttons
Click to expand...
Click to collapse
You sure about this?i am stuck there and i have cwm recovery installed,will it switch itself straight to recovery after the battery is dried up?i am using sony xperia c