[Q] Charging problem, tried the following... - T-Mobile Samsung Galaxy S II SGH-T989

Ok so a little of background story, if you don't care about it just skip to the next paragraph. I bought my T989 over the internet, it was working perfectly. I wanted to make the most of it, rooted it and tried Swapper 2, which hard bricked my phone. I'm not new to rooting, I've rooted some phones now, but I had never tried swapper, I liked the idea of unoccuping some RAM memory. Apparently I did something to my boot sequence thing and my phone was dead. I still had waranty on the phone (one week left when that happened so it is suspicious to anyone) so I called. After one hour of arguing over the phone and trying to convince them it wasn't my fault, which of course I knew it was, they decided to send me a new one... ahem "new" one.
Ok so here's where the priblem start. My "new" phone was working alright untill it stopped charging, didn't work AT ALL. I took a peek and one of the pins on my phone was bent, it was upwarda and as I tried to get it back to its place it fell off. I took my phone to get the MicroUSB replaced andsure enough they did.
My phone was charging again correctly. It was doing great untill it stated to charge slower and slower. It got to the point where it just shows as charging, but doesn't charge at all.
I've tried everything, I bought a new original Samsung battery, still same issue. I downloaded an app to tell me the amps the cellphone was pulling and it shows 350-450 when I have read it needs minimum 600. I have tried custom roms, kernels and nope, still pulling 400, tried LG chargers, Motorola chargers, a SAMSUNG S3 charger and still no luck. The thing they all have in common is that they're USB chargers so I read if the cellphone detects it as such it would give me a hard time.I've tried making a fast charge USB cable with a video on Youtube but it still only charges 400 mAmps. I've installed custom kernels with the "USB fast charge" and STILL no luck.
The ONLY thing I haven't tried is using and ORIGINAL, Samsung wall charger but at this point, I think it won't fix my problem because of the fact that I remember it worked well in the beggining. I am currently charging both batteries with a Universal Battery charger, but I've read that they wear out batteries throughout time.
So, is there another thing I haven't tried... or is my cellphone doomed now? I believe that it's the phone, as in the mother board if I can call it that, or does anybody have another theory?
Thanks for your time, would love to see anyone suggest

ShaDisNX255 said:
Ok so a little of background story, if you don't care about it just skip to the next paragraph. I bought my T989 over the internet, it was working perfectly. I wanted to make the most of it, rooted it and tried Swapper 2, which hard bricked my phone. I'm not new to rooting, I've rooted some phones now, but I had never tried swapper, I liked the idea of unoccuping some RAM memory. Apparently I did something to my boot sequence thing and my phone was dead. I still had waranty on the phone (one week left when that happened so it is suspicious to anyone) so I called. After one hour of arguing over the phone and trying to convince them it wasn't my fault, which of course I knew it was, they decided to send me a new one... ahem "new" one.
Ok so here's where the priblem start. My "new" phone was working alright untill it stopped charging, didn't work AT ALL. I took a peek and one of the pins on my phone was bent, it was upwarda and as I tried to get it back to its place it fell off. I took my phone to get the MicroUSB replaced andsure enough they did.
My phone was charging again correctly. It was doing great untill it stated to charge slower and slower. It got to the point where it just shows as charging, but doesn't charge at all.
I've tried everything, I bought a new original Samsung battery, still same issue. I downloaded an app to tell me the amps the cellphone was pulling and it shows 350-450 when I have read it needs minimum 600. I have tried custom roms, kernels and nope, still pulling 400, tried LG chargers, Motorola chargers, a SAMSUNG S3 charger and still no luck. The thing they all have in common is that they're USB chargers so I read if the cellphone detects it as such it would give me a hard time.I've tried making a fast charge USB cable with a video on Youtube but it still only charges 400 mAmps. I've installed custom kernels with the "USB fast charge" and STILL no luck.
The ONLY thing I haven't tried is using and ORIGINAL, Samsung wall charger but at this point, I think it won't fix my problem because of the fact that I remember it worked well in the beggining. I am currently charging both batteries with a Universal Battery charger, but I've read that they wear out batteries throughout time.
So, is there another thing I haven't tried... or is my cellphone doomed now? I believe that it's the phone, as in the mother board if I can call it that, or does anybody have another theory?
Thanks for your time, would love to see anyone suggest
Click to expand...
Click to collapse
I know this isn't an answer but a general comment. This is a good reason why I will NEVER buy electronics that are used or from a retailer that isn't a big name. I don't care what the seller says there is just really no way to know exactly what you are getting. If you had bought this phone from Amazon (direct) you could have already got another one by now with no arguments. I'd be looking for another phone and call it a loss.

ArtfulDodger said:
I know this isn't an answer but a general comment. This is a good reason why I will NEVER buy electronics that are used or from a retailer that isn't a big name. I don't care what the seller says there is just really no way to know exactly what you are getting. If you had bought this phone from Amazon (direct) you could have already got another one by now with no arguments. I'd be looking for another phone and call it a loss.
Click to expand...
Click to collapse
Thanks dude, I know it really matters on where you buy it, but the price was just so handsome to me. I guess that's what I get and as things like this happen you learn more and more on what you buy and what you decide to do with them. I guess I already consider it as a loss but I'm aware that it's not unusable yet. I guess I will continue to charge both my batteries with the charger, but I was just curious to know what really happened to the phone to avoid things like this in the future

ShaDisNX255 said:
Thanks dude, I know it really matters on where you buy it, but the price was just so handsome to me. I guess that's what I get and as things like this happen you learn more and more on what you buy and what you decide to do with them. I guess I already consider it as a loss but I'm aware that it's not unusable yet. I guess I will continue to charge both my batteries with the charger, but I was just curious to know what really happened to the phone to avoid things like this in the future
Click to expand...
Click to collapse
What apps do you all have installed on your phone and running while you are charging it? Try making a full backup then do a clean install of your ROM (backup just in case this doesn't fix it). After doing this do NOT install any apps, just test charging. If charging works, it is some app on your phone. I know those "battery saving" apps can eat up a lot of battery if configured wrong. And if you have a lot of background apps running, they can eat your battery without you knowing and reduce charging time.
Go into settings->device and check what is eating up your battery there before charging and during charging.
If you don't want to re-install your ROM, try charging your phone with the screen off (no screensaver (daydream) or nothing, just screen off, charging) and in airplane mode. I recommend doing a clean install to see if it is some apps (you can use TB to back everything up, then do the clean install and test from there).

bmg002 said:
What apps do you all have installed on your phone and running while you are charging it? Try making a full backup then do a clean install of your ROM (backup just in case this doesn't fix it). After doing this do NOT install any apps, just test charging. If charging works, it is some app on your phone. I know those "battery saving" apps can eat up a lot of battery if configured wrong. And if you have a lot of background apps running, they can eat your battery without you knowing and reduce charging time.
Go into settings->device and check what is eating up your battery there before charging and during charging.
If you don't want to re-install your ROM, try charging your phone with the screen off (no screensaver (daydream) or nothing, just screen off, charging) and in airplane mode. I recommend doing a clean install to see if it is some apps (you can use TB to back everything up, then do the clean install and test from there).
Click to expand...
Click to collapse
The ROM I currently have has a great battery saving mode, I also have "Advanced Task Killer" to kill any apps. It's the same issue. I want to buy a new charger but I still think that won't fix my problem. I've also charged in Airplane mode and no luck

ShaDisNX255 said:
The ROM I currently have has a great battery saving mode, I also have "Advanced Task Killer" to kill any apps. It's the same issue. I want to buy a new charger but I still think that won't fix my problem. I've also charged in Airplane mode and no luck
Click to expand...
Click to collapse
i would plug it to someone elses charger or buy one, had a ton of them fail-hope that helps
---------- Post added at 11:58 AM ---------- Previous post was at 11:49 AM ----------
Sorry didn't read good, you've already tried other chargers, ignore my ignorance
Sent from my SGH-T989 using xda app-developers app

ShaDisNX255 said:
The ROM I currently have has a great battery saving mode, I also have "Advanced Task Killer" to kill any apps. It's the same issue. I want to buy a new charger but I still think that won't fix my problem. I've also charged in Airplane mode and no luck
Click to expand...
Click to collapse
Can you go into settings->Battery and post a screenshot of it? I'm curious as to what is eating up most of your battery.
After, I would still try doing a nandroid and flash your rom cleanly and install 0 apps and try charging on this clean install. I know my friend ended up getting some battery optimization app installed (which she claims she never installed, but it is on her phone) and her charging times were horrid. It also made the phone quite laggy. I imagine if you got 2 or so of these types of apps on your phone, it could eat your battery instead of charging it.
Also, when you charge it, it is a strict charging cable not a MHL adapter right? I know when I have my MHL cable hooked up to my phone it claims it is charging, but it actually drains the battery slowly. (MHL is micro USB -> HDMI).
Since you have tried multiple chargers and cables, I would be looking at the phone as being the problem. Also, look at the contacts on the bottom of the phone and look for any bent pins. I wouldn't try to fix that yourself, but if they are bent, I'd take it in for repair. those pins are very fragile once bent and can break off if not handled very carefully after they are bent.
If you can get into adb from your phone to PC, then the pins on your phone should be good and the USB cable should be good. Does it charge if you put it in fast charge and plug it into your PC?

bmg002 said:
Can you go into settings->Battery and post a screenshot of it? I'm curious as to what is eating up most of your battery.
After, I would still try doing a nandroid and flash your rom cleanly and install 0 apps and try charging on this clean install. I know my friend ended up getting some battery optimization app installed (which she claims she never installed, but it is on her phone) and her charging times were horrid. It also made the phone quite laggy. I imagine if you got 2 or so of these types of apps on your phone, it could eat your battery instead of charging it.
Also, when you charge it, it is a strict charging cable not a MHL adapter right? I know when I have my MHL cable hooked up to my phone it claims it is charging, but it actually drains the battery slowly. (MHL is micro USB -> HDMI).
Since you have tried multiple chargers and cables, I would be looking at the phone as being the problem. Also, look at the contacts on the bottom of the phone and look for any bent pins. I wouldn't try to fix that yourself, but if they are bent, I'd take it in for repair. those pins are very fragile once bent and can break off if not handled very carefully after they are bent.
If you can get into adb from your phone to PC, then the pins on your phone should be good and the USB cable should be good. Does it charge if you put it in fast charge and plug it into your PC?
Click to expand...
Click to collapse
The pins are alright. As I stated, I recently changed the MicroUSB port, well I paid somebody to do it and it was working fine at first but then stopped charging, well, not stopped charging actually. At first it started to charge slower and slower untill it got to the point that it just says it's charging but it doesn't charge. It COULD be to the fact that I flashed new ROMs, downloaded games and all but I doubt it since now I have a brand new ROM with no games (or not that many) and you can see from the screenshots I uploaded that nothing's eating my battery
Well except for my screen, I had it at 80% brightness lol. Usually I set the brightness at the lowest (no Auto brightness to save battery) and my wall paper is color black since I heard Samsung phones do save up battery with black since it doesn't light the LEDs or something like that.
And yes, it's strictly USB cable. When I activate "Fast charge" and if I connect the phone to the computer it just shows the notification "USB connected" for a second and then disapears.

ShaDisNX255 said:
The pins are alright. As I stated, I recently changed the MicroUSB port, well I paid somebody to do it and it was working fine at first but then stopped charging, well, not stopped charging actually. At first it started to charge slower and slower untill it got to the point that it just says it's charging but it doesn't charge. It COULD be to the fact that I flashed new ROMs, downloaded games and all but I doubt it since now I have a brand new ROM with no games (or not that many) and you can see from the screenshots I uploaded that nothing's eating my battery
Well except for my screen, I had it at 80% brightness lol. Usually I set the brightness at the lowest (no Auto brightness to save battery) and my wall paper is color black since I heard Samsung phones do save up battery with black since it doesn't light the LEDs or something like that.
And yes, it's strictly USB cable. When I activate "Fast charge" and if I connect the phone to the computer it just shows the notification "USB connected" for a second and then disapears.
Click to expand...
Click to collapse
the screenshots attached were helpful. I don't see anything in that list that looks like a huge battery sucker and since you say your rom is fairly fresh and clean, it likely isn't the apps. Are you sure the guy who swapped the microUSB port did it correctly? Improperly soldered pins (especially those tiny ones on a microUSB port) can be tricky to solder correctly if you don't have the correct tips. It could also be that something else got damaged while putting that on (if the capacitors were not properly discharged before replacing the microUSB port, they could have gotten damaged).
I think that your assessment that it is one of the boards (likely the charging circuit) got damaged. I'd go back to the guy who replaced the port and get him to check the charging board (specifically the capacitors) to see if there is any signs of damage or wear. Capacitors can get damaged really easily if the heat on the iron was set too high. I know I've damaged capacitors while soldering things before. Or it could be that the port didn't get a solid solder connection or ended up briding some pins. If fast charge is on, your PC shouldn't see a USB device being plugged in. If you have a multimeter, you could check the resistance on the 4 USB pins and see if any of the pins are bridged.

bmg002 said:
the screenshots attached were helpful. I don't see anything in that list that looks like a huge battery sucker and since you say your rom is fairly fresh and clean, it likely isn't the apps. Are you sure the guy who swapped the microUSB port did it correctly? Improperly soldered pins (especially those tiny ones on a microUSB port) can be tricky to solder correctly if you don't have the correct tips. It could also be that something else got damaged while putting that on (if the capacitors were not properly discharged before replacing the microUSB port, they could have gotten damaged).
I think that your assessment that it is one of the boards (likely the charging circuit) got damaged. I'd go back to the guy who replaced the port and get him to check the charging board (specifically the capacitors) to see if there is any signs of damage or wear. Capacitors can get damaged really easily if the heat on the iron was set too high. I know I've damaged capacitors while soldering things before. Or it could be that the port didn't get a solid solder connection or ended up briding some pins. If fast charge is on, your PC shouldn't see a USB device being plugged in. If you have a multimeter, you could check the resistance on the 4 USB pins and see if any of the pins are bridged.
Click to expand...
Click to collapse
Well I took it to the guy from before and he couldn't find a problem with the phone's soldering, but even he wasn't sure what the problem was as if it's not his specialty. I do not have a multimeter :/
I was thinking taking it somewhere else and have them change my microUSB port to see if that other person might now a bit more. I'm sorry but I'm more of a software type of person, I clearly have no clue what the problem might be
THANK YOU for really helping me and taking your time to analyze my question, I really appreciate it thanks man
So if what you say is true, do you think it can still be fixed?

ShaDisNX255 said:
Well I took it to the guy from before and he couldn't find a problem with the phone's soldering, but even he wasn't sure what the problem was as if it's not his specialty. I do not have a multimeter :/
I was thinking taking it somewhere else and have them change my microUSB port to see if that other person might now a bit more. I'm sorry but I'm more of a software type of person, I clearly have no clue what the problem might be
THANK YOU for really helping me and taking your time to analyze my question, I really appreciate it thanks man
So if what you say is true, do you think it can still be fixed?
Click to expand...
Click to collapse
It definitly can still be fixed, it'll just be tricky. If they are surface mount capacitors, which they likely are, it is hard to tell when they go.
Sent from my SM-T310 using xda app-developers app

bmg002 said:
It definitly can still be fixed, it'll just be tricky. If they are surface mount capacitors, which they likely are, it is hard to tell when they go.
Sent from my SM-T310 using xda app-developers app
Click to expand...
Click to collapse
So what I should tell them to do is to change the capacitors? I can leave the same miniUSB port right?

​
ShaDisNX255 said:
So what I should tell them to do is to change the capacitors? I can leave the same miniUSB port right?
Click to expand...
Click to collapse
I would tell them the symptoms and let them tell you what they think should be fixed. In my mind it is likely the capacitors on the charging board that need replacing, but without having the hardware physically in front of me and hooked up to a multimeter, I cannot say for certain. It could be a faulty microUSB port or a bad pin (bridged or microfractured), could be damaged PCB trace, could be gremlins
I would bring it in somewhere or give it to somebody and tell them that the phone doesn't seem to be taking a charge and ask them if they can look at it. If it is still in warranty, send it to Samsung to get fixed. If it is outside of warranty, take it to somebody who knows their stuff (likely a professional repair shop OR somebody who does cell phone or PCB repair for a living... hobbyists may be able to fix it, but to me this sounds like something that somebody with training should likely look at).
Since you have tested different AC adapters (including known-good ones) and different cables (including known good ones) and charged the battery outside of the phone, that narrows the problem down to being something with the phone. You narrowed down it is likely not software related, so that leaves hardware. I know from experience soldering very small components can cause bridges quite easily; even when done by the pros. Some bridges don't matter, but it is better to avoid solder bridges whenever possible. I know I had to replace my nintendo DS slot-1 due to a busted pin and soldering that thing with a large iron was a pain in the behind. Got it all fixed, but it was not an easy task.

bmg002 said:
​
I would tell them the symptoms and let them tell you what they think should be fixed. In my mind it is likely the capacitors on the charging board that need replacing, but without having the hardware physically in front of me and hooked up to a multimeter, I cannot say for certain. It could be a faulty microUSB port or a bad pin (bridged or microfractured), could be damaged PCB trace, could be gremlins
I would bring it in somewhere or give it to somebody and tell them that the phone doesn't seem to be taking a charge and ask them if they can look at it. If it is still in warranty, send it to Samsung to get fixed. If it is outside of warranty, take it to somebody who knows their stuff (likely a professional repair shop OR somebody who does cell phone or PCB repair for a living... hobbyists may be able to fix it, but to me this sounds like something that somebody with training should likely look at).
Since you have tested different AC adapters (including known-good ones) and different cables (including known good ones) and charged the battery outside of the phone, that narrows the problem down to being something with the phone. You narrowed down it is likely not software related, so that leaves hardware. I know from experience soldering very small components can cause bridges quite easily; even when done by the pros. Some bridges don't matter, but it is better to avoid solder bridges whenever possible. I know I had to replace my nintendo DS slot-1 due to a busted pin and soldering that thing with a large iron was a pain in the behind. Got it all fixed, but it was not an easy task.
Click to expand...
Click to collapse
This gives me new hope, I really don't mind charging my phone this way, but I'd rather have a complete phone with the ability to charge from a wall outlet
Thanks so much, I hope I can count on you if I run to anything else. And hey, you learn something new every day, ALL of this has been really helpful

ShaDisNX255 said:
This gives me new hope, I really don't mind charging my phone this way, but I'd rather have a complete phone with the ability to charge from a wall outlet
Thanks so much, I hope I can count on you if I run to anything else. And hey, you learn something new every day, ALL of this has been really helpful
Click to expand...
Click to collapse
Glad I can help. I used to work professionally soldering tiny components before moving into IT. Done some hardware mod to a few cameras, repaired a ps2 controller, have an old tube amp going fix soon too. I've seen a lot of weird things happen with bad solder joints or faulty capacitors.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

Related

[Q] Kernels and charging

I've been messing around with roms for a while now, and I've finally chosen one that I really like, but the other day I decided to start playing with kernels, and I flashed netarchy-toastmod-4.3.2-cfs-sbc-havs-more-universal-signed. Once I flashed it, my phone would no longer charge at all. When I plug it in, the orange charging indicator would come on for just a second, and then turn off as if I unplugged it.
I had this happen once before, when I installed the fullHDMI app, I read that if I installed a custom kernel I would get better performance, and the same thing happened.
Luckily I am OCD about most things I do, and I ALWAYS Nandroid, so I was easily able to revert back to my former rom and kernel with no problems.
And the last time, my phone would charge fine if it was off, so worst case scenario, until I did a restore, I could get by just turning my phone off and charging til it was ready. But this time, my phone wouldn't do either! When its on, again, light comes on for a second, then turns off. And when its off, I don't even get that much!
I have never had an official htc charger (bought my phone on Craigslist and the guy "forgot it"), but I used to use my old Samsung Reclaim charger with no problems. Therefore, I can't remember whether or not the charger I'm currently using (stupid Rocketfish micro usb charger from best buy) ever charged my phone when its off.
Which brings me to my question, really. How do kernels affect charging on the Evo? I've read elsewhere about people having issues after flashing a new kernel. And really, does it matter if you're using an aftermarket charger or the OEM htc charger?
I would love to be able to play with new kernels and see what's best for my battery life, but every time (btw, if its relevant, the 2 times I've tried flashing a kernel without a full Rom I've had charging issues) I've tried I run into trouble, and I am terrified that I'll flash and forget, and won't have enough battery life to restore to my old kernel!
Edit: Also, whenever I forget my charger at home, I can usually find one laying around at work, and the one I usually use, some AT&T micro usb charger, has never worked unless my phones off, even with the built in kernels. It works perfect, on or off, with my buddys stock, non-rooted Evo. I haven't tried it lately, so I'm not sure if it'll even charge while off. I just feel like my charging issues are kernel related, and I wouldn't think the kernel would affect anything while the phone is turned off? Do different kernels work only with certain chargers? And do some chargers only work when enabled by certain kernels? I find it hard to believe that there's anything physically wrong with my phone when I can always restore and get it working again, but at the same time, its weird to me that some work while my phones off, and others do not.
Update: Just tried the Rocketfish charger while off. Phone does not respond to it whatsoever.. I need my Reclaim charger back! But again, this raises the question, do some chargers only work when enabled by certain kernels? Why would this charger not work when the phone is off, when no software is running, but work fine when its on and certain kernels are running??
Nothing??
Does anybody know anything about this?
that's weird man. if your phone isn't charging even when the phone is off, then it's not kernel related, it would be hardware related (possibly your charger port on the bottom of the phone) i read somewhere that the charger port has been reported to break off easily. have you connected it to a computer to see if the computer recognizes it?
edit: i noticed you were using an SBC kernel. I'm not gonna get into the whole debate about if sbc fries batteries and stuff, but have you tried swapping out your battery for another one? maybe the battery is fried?
gotshores said:
that's weird man. if your phone isn't charging even when the phone is off, then it's not kernel related, it would be hardware related (possibly your charger port on the bottom of the phone) i read somewhere that the charger port has been reported to break off easily. have you connected it to a computer to see if the computer recognizes it?
edit: i noticed you were using an SBC kernel. I'm not gonna get into the whole debate about if sbc fries batteries and stuff, but have you tried swapping out your battery for another one? maybe the battery is fried?
Click to expand...
Click to collapse
I think its your charger too. I've had other phone (hybrids..yuck) that were very charger sensitive so it would not surprise me at all. THIS is the same charger that came with the phones so it will work or if your an ebayer like myself than go THIS route since its cheaper. And I've used SBS kernels since they first arrived on the seen and still to this day have had no problem, but everyone is different.
I also have had a phone with a broken usb port. It wont let you charge unless the port is wiggled just right and as soon as the phone is moved itd stop charging. Your issue definitely sounds like a charger problem to me.
Also, next time try to sum everything up in a paragraph or so. Many people will turn down a question when they have to read an essays worth of info.
Yeah sorry, I know I wrote a novel. I was kinda drunk and wanted to get the facts out there. I know my problem is not hardware related though. Charges perfect, no wiggling required, while my phone is on. Won't charge whatsoever, no matter how much I wiggle, with the phone off. It's just weird to me..
And the second the kernel loads after the boot animation (screen dims and 4 softkeys light up) my phone starts charging. Can a kernel make a charger that's not compatible compatible?
I believe the kernels are based off of HTC Stock Kernels, they are just tweaked to achieve greater performance. I've never seen any evidence of Dev's adding/removing charger compatibility so Id say its safe to say no.
mhoffman54 said:
... I was kinda drunk...
Click to expand...
Click to collapse
Nuff said! Been there. lol
mhoffman54 said:
Yeah sorry, I know I wrote a novel. I was kinda drunk and wanted to get the facts out there. I know my problem is not hardware related though. Charges perfect, no wiggling required, while my phone is on. Won't charge whatsoever, no matter how much I wiggle, with the phone off. It's just weird to me..
Click to expand...
Click to collapse
mhoffman54 said:
And the second the kernel loads after the boot animation (screen dims and 4 softkeys light up) my phone starts charging. Can a kernel make a charger that's not compatible compatible?
Click to expand...
Click to collapse
I've never experienced anything like that before. Very strange. I wouldn't think that a kernel would prevent the phone from charging while the phone is powered off. I also wouldn't think that a kernel could make an 'incompatible' charger 'compatible'. If the charger is Micro USB, it *should* be compatible. I always use the charger that came with my phone, but I have used other ones in a few different instances, and have never had a charging issue whatsoever. Some chargers have different ratings, such as 1Amp charge output, or .5A charge output. Generally USB and car chargers charge at .5A, while wall chargers charge at 1A. The Evo should charge with either one, as long as the cable is Micro USB. I just don't see how a charger could even be 'incompatible', unless the charger itself was no good. My guesses are, either a bad battery, or a bad connection where the battery makes contact. Or, a hardware issue. There is a known problem for some Evo's, where the solder joints that connect the USB charge port to the motherboard fail. Poor solder joints. That could be your problem. I just don't buy that it's software related, because the phone should charge when it's powered down, regardless of the software. However, it is strange that this happened right after changing kernels, and nandroid restoring to your previous setup alleviated the problem...that is strange. I guess the easiest and least invasive thing to try would be flashing a few different kernels, and see how different kernels affect the problem. If the problem persists no matter what kernel / rom combo you're on, then it's not software related. If the problem goes away when you change kernels, then maybe somehow it is software/kernel related. It's just very odd.

charging/usb port problem - can't un-root

I've seen this problem mentioned before, but no good fixes.
My phone won't charge while on, but will when off. Charging has always been a little buggy, but now seems stuck this way.
The problem seems to keep my phone from connecting to the computer - neither the mac android download program will recognize the phone, nor will it charge off the computer, nor will the wugfresh tool see it when plugged into my PC.
I rooted/unlocked using the wugfresh tool (kept the stock ROM) and figure I need to warranty replace the phone - but because the computer won't recognize it, I don't know how to un-root/re-lock it.
Question - 1. anybody know how to fix my usb charging/recognition problem? 2. assuming not, is there a way to un-root/re-lock the phone without needing to plug the phone into a computer?
Thanks very much!
Does it charge with the phone on from AC? And when it's plugged up to your mac, does it have the thing in the notification bar saying its connected?
It's possible you have a bad cable, just to eliminate the easy fix first. It should charge fine with any mini USB charger.
If you can get it to charge from AC, I'd try a different computer if possible or if not maybe a re-install of the drivers.
Next, as maybe a last ditch effort, it's possible the ROM got corrupted, though I'm not sure how likely that would be. I'm sure you can get the stock ROM to flash in Clockworkmod but the only way to re-lock the bootloader that I know of requires a PC.
Maybe someone else can chime in weather or not Samsung actually cares if you're unlocked when it comes to a warranty for a hardware problem. Also, what carrier do you have? They may just give you a new phone themselves and again, maybe someone can tell you if they actually look at whether you've modded your phone.
Thanks for the reply.
Yes, when it's hooked up to an AC adapter and the phone is ON, I get no charging. When the phone is on and hooked up to a computer (both PC and mac), I get no charging. No upper right hand corner battery indicator change.
In fact, when the phone is off and hooked up to AC power, it seems to be hit-and-miss as to whether or not it actually charges.
Plugged into a computer, I get nothing - it doesn't register a device is attached at all.
I think that's a great question - if you return an un-locked phone, do they definitely get mad at you? I wonder if that's been asked in the forums before...maybe I'll make a different thread?
Also, from clockworkmod, how can I flash the original rom, as you suggested?
I've already factory re-set the phone and even flashed a different ROM just to see what would happen - and it didn't fix the charging issue.
Try this https://play.google.com/store/apps/details?id=eu.chainfire.mobileodin.pro
Sent from my Galaxy Nexus using xda premium
I literally had this exact issue over the weekend where it would charge when powered off but then the USB would completely die when the phone was turned on. All after using my incar charger. It seems the port inside the phone got bent so that the board inside was almost touching the bottom of the phone. If held flat on your palm...
I fixed it by bending the board back up with a knife so its dead in the middle of the port. No problems charging now.
this exact problem has been an issue for me as well, contacted Samsung and told them i bought it second hand and they issued a rma and sent me a ups label t send it in. This is my first phone that broke before I even had a chance to root it. I was pissed at Htc so decided to try something new. Going back to my T-Bolt for a while now.
My phone charges sometimes, others it doesnt. Sometimes the "Nintendo blow" works, other times it requires force. Eventually I can always get it to charge, but it can take a half hour of playing with it. I have multiple cables, original Samsung batteries, and lots of experience inside phones, and have never had an issue that I couldnt FULLY determine was hardware or software. Samsung claims they have never seen this issue. lol. Obviously they dont visit the forums
cymru said:
I literally had this exact issue over the weekend where it would charge when powered off but then the USB would completely die when the phone was turned on. All after using my incar charger. It seems the port inside the phone got bent so that the board inside was almost touching the bottom of the phone. If held flat on your palm...
I fixed it by bending the board back up with a knife so its dead in the middle of the port. No problems charging now.
Click to expand...
Click to collapse
great idea - i was using my car charger this weekend. i'll give it a shot.
update - i bent the little board up off the bottom, and now i can't fit the charger in it. uhoh.
This is becoming a bigger and bigger issue. Please star and/or comment on this issue: http://code.google.com/p/android/issues/detail?id=23789
I sent my galaxy to Samsung 2 weeks ago, it is due to arrive back today. They paid postage each way and the invoice says they replaced a component (no detail) and updated software and prl. I was already on the current release so not sure what to expect. But it is good to know they are taking care of us.

Galaxy Nexus battery/charging problem?

My phone has been going insane for the last two days. It will think that it is charging when it isn't plugged in. Sometimes it will cycle between not charging and charging at a rapid rate, causing the screen to turn on and stay on (the screen will normally turn on when plugged in). I've tried various resets, battery pulls, etc. This is not a rooted device. If I pull the battery and then reboot the phone, the battery will be 10-15% lower than when I pulled the battery only a minute earlier. Anyone experience this?
This has been happening to a lot of people. It is indeed a hardware problem. There is a way to fix it, what u need to do it reposition the USB female receiving jack ever so slightly.
1) turn the phone off and take the battery out
2) take a toothpick, knife , pin or whatever will fit into the micro USB slot of the galaxy nexus.
3) VERY VERY slowly make it so that the little shelf like connector is in the middle.
4) connect ur phone and it will work like new. This works for a lot of people. I did this a few hours ago and my phone now charges perfect
RECOMENDATION : when it starts to charge you should restore a stock image and lock the boot loader so that you can get a new phone replaced . This is a way to fix it but this hardware issue shouldve never happened in the first place and it should warrant a return. Let me know what happens!
Sent from my Galaxy Nexus using xda app-developers app
Okaay said:
This has been happening to a lot of people. It is indeed a hardware problem. There is a way to fix it, what u need to do it reposition the USB female receiving jack ever so slightly.
1) turn the phone off and take the battery out
2) take a toothpick, knife , pin or whatever will fit into the micro USB slot of the galaxy nexus.
3) VERY VERY slowly make it so that the little shelf like connector is in the middle.
4) connect ur phone and it will work like new. This works for a lot of people. I did this a few hours ago and my phone now charges perfect
RECOMENDATION : when it starts to charge you should restore a stock image and lock the boot loader so that you can get a new phone replaced . This is a way to fix it but this hardware issue shouldve never happened in the first place and it should warrant a return. Let me know what happens!
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Agreed.
However, I've detailed re-locking and returning to stock via my guide with a broken USB port if it ever gets to that point for you/anyone.
Okaay said:
I did this a few hours ago and my phone now charges perfect
Click to expand...
Click to collapse
I don't think "doing this a few hours ago" is really a long enough time to say it works perfectly. The same thing happened to my phone and I have seen several people claim this solution fixes the problem. I tried it and it fixed it for about two days but then it came back, and it won't go away now regardless of what I do with the charging port. I am starting to believe there is no solution but to buy a new phone
New glitch spotted when phone is of and in the charger it wil chrage for like 2 seconds and then the animation saays the phone is full!but 2seconda later its charging again so on and so on... sort of chargingloop..
But it never charges
Sent from my GT-P1000 using xda app-developers app
Sent from my GT-P1000 using xda app-developers app
Same issues here :/
Sent from my T-Mobile G2 using xda app-developers app
Same problem here..But I found out the solution after irritation of 3 weeks one day i dropped my nexus and after that instance it is working perfectly fine without any charging.
Its been 4 Weeks without any problem.
Please try at your risk.
i had the same exact issue try wiping dalvik ,battery stats and cache under recovery, fixed all issued...i think this was caused after using the fast ac charge on francos kernal.
i found a solution.
I had the same problem. at the the begining it didn´t charge. i made hard reset and nothing. i ordered a new battery and nothing. Then i see something different in tee microusb port when i compared it with an xperia x10 port. I realise that the tiny plate inside the port was bended. then with a needle i straighten it, and the charge bolt icon returns to life. But after that some times it comes up without charging conection. Then i found some blog post that said that the "Dock Connector Charging Port Flex Cable Ribbon For Samsung Galaxy Nexus i9250" was the problem. I found a guide to disassemble an change that micro usb port, it is really easy, i made in 30 minutes, even been the first time. I bought the replacement part in ebay (ebay.com/itm/-/130656140500?item=130656140500&viewitem=&ViewItem) but after that i found many web stores with it an cheaper prices.
I suggest to see
ifixit.com/Guide/Repairing-Samsung-Galaxy-Nexus-Verizon-LTE-Micro-USB-Charge-Port-Main-Mic/9641/1[/url]
enjoy
Replacing micro usb charge port does not work!
nelsmo said:
I had the same problem. at the the begining it didn´t charge. i made hard reset and nothing. i ordered a new battery and nothing. Then i see something different in tee microusb port when i compared it with an xperia x10 port. I realise that the tiny plate inside the port was bended. then with a needle i straighten it, and the charge bolt icon returns to life. But after that some times it comes up without charging conection. Then i found some blog post that said that the "Dock Connector Charging Port Flex Cable Ribbon For Samsung Galaxy Nexus i9250" was the problem. I found a guide to disassemble an change that micro usb port, it is really easy, i made in 30 minutes, even been the first time. I bought the replacement part in ebay (ebay.com/itm/-/130656140500?item=130656140500&viewitem=&ViewItem) but after that i found many web stores with it an cheaper prices.
I suggest to see
ifixit.com/Guide/Repairing-Samsung-Galaxy-Nexus-Verizon-LTE-Micro-USB-Charge-Port-Main-Mic/9641/1[/url]
enjoy
Click to expand...
Click to collapse
Sorry, I have been having the same issues with my gnex, after it hits full charge the charging indicator will flash on and off on my screen until I reach 90% on my battery then it will quit the rest of the day.. always does it after hitting full charge so please read what I've done and still have the same problem...... I have used multiple batteries, same problem, I've used different chargers, same problem, I even bought that part off ebay and replaced the charge port inside of the phone, same problem.. and I even tried all of this before receiving the jelly bean update, and even after the update I still have the same charging error issue... does anyone know of any other solutions? I've done them all I think.
I had a very similar issue (the phone would charge ONLY if turned off, computer would not recognize the USB device 90% of the time).
Turns off that fuzz and dandruff had accumulated at the bottom of the USB port (you couldn't see it) so i took a needle and carefully pried it out, it was a nice sized ball of stuff that was preventing the USB port from making clean contact with the cable.
Hope that helps
Amestris said:
Sorry, I have been having the same issues with my gnex, after it hits full charge the charging indicator will flash on and off on my screen until I reach 90% on my battery then it will quit the rest of the day.. always does it after hitting full charge so please read what I've done and still have the same problem...... I have used multiple batteries, same problem, I've used different chargers, same problem, I even bought that part off ebay and replaced the charge port inside of the phone, same problem.. and I even tried all of this before receiving the jelly bean update, and even after the update I still have the same charging error issue... does anyone know of any other solutions? I've done them all I think.
Click to expand...
Click to collapse
I am stuck in the same boat as you. I have tried almost everything but it seems that this issue keeps persisting. I don't have warranty so it isn't like I can give it in for replacement. I don't know what else is there to do
I'm going insane reading these.
Google is your best friend in the whole world. Your best friend. If you're out of warranty, the best you can do is use a pogo dock, or replace, like take apart your GalNex and replace the port with a part bought from eBay.
Or, if you look at some of the other 99 threads about this, some people fixed theirs by adjusting the port with a screwdriver or something like that. Can't say I recommend that though.
Sent from my Galaxy Nexus using xda app-developers app
---------- Post added at 10:08 AM ---------- Previous post was at 10:06 AM ----------
And Jesus Christ, someone sue Samsung already, if its really happening so much that there's at least one thread about every day, SUE THEM. They'll pay you off with Galaxy S III's so fast you'll think warranty replacement is slow...
Sent from my Galaxy Nexus using xda app-developers app
Already replaced the usb port and still didn't work if you'd read my whole post.. But idc. The gnex was a horrible phone. Got an S3 with a different company.. I love this phone. So idc anymore.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
No problem with USB port
Amestris said:
Already replaced the usb port and still didn't work if you'd read my whole post.. But idc. The gnex was a horrible phone. Got an S3 with a different company.. I love this phone. So idc anymore.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I don't think there is a problem with USB port. I can charge my phone via the USB connection from my laptop, but the same is not possible when I use he same charger with wall unit charging. Also If I reboot my phone then I can even charge it via the wall unit.
It seems something to do with some app or battery temp.....
koolgk said:
I don't think there is a problem with USB port. I can charge my phone via the USB connection from my laptop, but the same is not possible when I use he same charger with wall unit charging. Also If I reboot my phone then I can even charge it via the wall unit.
It seems something to do with some app or battery temp.....
Click to expand...
Click to collapse
mine is the same.
i had fix this problem but it's very annoying
ASSLAM O ALAIKUM
in advance sorry for my bad English but i'll try to guide you
i had same problem..
but when i see my phone is still connected while on fast boot mod then i think it is bad kernel or some software problem...
at the 1st time i connect my phone to pc in fastboot mod ( VOL up + VOL down + POWER ) system recognize it android 1.0 and then i leave my phone on fastboot mod for 2 or 3 hours then i restart my phone again and see that charging is 100% :good: :good:
i know this is not a good solution bit it helps
sorry for my bad english
I've tried and this solution works!
Okaay said:
This has been happening to a lot of people. It is indeed a hardware problem. There is a way to fix it, what u need to do it reposition the USB female receiving jack ever so slightly.
1) turn the phone off and take the battery out
2) take a toothpick, knife , pin or whatever will fit into the micro USB slot of the galaxy nexus.
3) VERY VERY slowly make it so that the little shelf like connector is in the middle.
4) connect ur phone and it will work like new. This works for a lot of people. I did this a few hours ago and my phone now charges perfect
RECOMENDATION : when it starts to charge you should restore a stock image and lock the boot loader so that you can get a new phone replaced . This is a way to fix it but this hardware issue shouldve never happened in the first place and it should warrant a return. Let me know what happens!
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Thank u so much for this! My battery is charging and i didn't have to go pay a dime to get it fixed! I GOT MY PHONE BACK!
I had the same problem, then this morning it wont turn on without being connected to a charger. Please help fix!
Cheers
elfarto said:
I had a very similar issue (the phone would charge ONLY if turned off, computer would not recognize the USB device 90% of the time).
Turns off that fuzz and dandruff had accumulated at the bottom of the USB port (you couldn't see it) so i took a needle and carefully pried it out, it was a nice sized ball of stuff that was preventing the USB port from making clean contact with the cable.
Hope that helps
Click to expand...
Click to collapse
Cheers mate! Was all set to get a replacement ribbon and maybe buy a temporary device... your simple tip had the phone charging again in seconds.
Bit embarrassed I didn't think of the obvious, worked in mobile 10+ years. Phone is 7 years old and still going strong... thanks again, made my day )

[Q] Phone says that it's always charging?

I don't know how to go about this, because, to my knowledge, its not effecting the phone in any way. Maybe a little drain, but that could be 4.2's problem. But regardless, my phone is always "on charge" no matter where I am. On any ROM this happens, so I know its a physical thing. I've been told that you can use a knife to push the contact up a little, but that only works until I plug it back in the next day. So...... Any thoughts on how to fix this without replacing the charging port? (To my knowledge, that involves soldering very small parts.)
jcoinster said:
I don't know how to go about this, because, to my knowledge, its not effecting the phone in any way. Maybe a little drain, but that could be 4.2's problem. But regardless, my phone is always "on charge" no matter where I am. On any ROM this happens, so I know its a physical thing. I've been told that you can use a knife to push the contact up a little, but that only works until I plug it back in the next day. So...... Any thoughts on how to fix this without replacing the charging port? (To my knowledge, that involves soldering very small parts.)
Click to expand...
Click to collapse
Well if it worked by bending the contacts up but goes back when you plug it in. Have you tried a different cable? Also have you cleaned out your charging port?
(Phone side and cable side)
Sent from my SPH-D710 using xda premium
g_ding84 said:
Well if it worked by bending the contacts up but goes back when you plug it in. Have you tried a different cable? Also have you cleaned out your charging port?
(Phone side and cable side)
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I already tried clearing the ports and I tried other wires. Hell. I dont even charge my phone using a wire! I charge them using a battery charger.
Corrosion on charge port can cause this as did happen to mine
Sent from an Apple killing JellyBean
moparfreak426 said:
Corrosion on charge port can cause this as did happen to mine
Sent from an Apple killing JellyBean
Click to expand...
Click to collapse
Agreed. At this point you could be having issues where you can't see it, such as where the port is connected to the board.
Had to take port completely off before i noticed... Sprayed with acid (not recommended) and cleaned it, rinsed it, soldered back in place = good to go..... For now
Sent from an Apple killing JellyBean
jcoinster said:
I don't know how to go about this, because, to my knowledge, its not effecting the phone in any way. Maybe a little drain, but that could be 4.2's problem. But regardless, my phone is always "on charge" no matter where I am. On any ROM this happens, so I know its a physical thing. I've been told that you can use a knife to push the contact up a little, but that only works until I plug it back in the next day. So...... Any thoughts on how to fix this without replacing the charging port? (To my knowledge, that involves soldering very small parts.)
Click to expand...
Click to collapse
If you need to repair it go the this site. http://mobiletechvideos.mybigcommerce.com/samsung-epic-4g-touch-usb-port-repair/
You send it to them and they will fix it.
Turn around time is normally 5 to 7 days.
I mean. I guess i'll use it until it breaks. And even then, I use an external battery charger. So. Yeah....
Yeah i fixed mine.... I always end up fixing all my electronic problems... But i lost my charger so i still use a battery wall charger... Used my brothers charger to test my fix
Sent from an Apple killing JellyBean
Hi jeep, i have a similar problem but i'm not sure it's the same, i happened a few days ago when myi changed the battery and pugged in the charger, i noticed there was something strange, the phone's screen showed the battery was charging before i pugged in back (just when i placed the new battery). Now it behaves as it's always plugged in charging just when placing the battery in, the phones is turned off and the screen shows charging battery icon (i've tried 2 more batteries), and also there's no usb connection to the PC either.
It's a very bothering problem, the phons won't go into deep sleep, and the screen goes to the screensaver all the time (as it where pugged in charging)...
I always repair my own electronics, months ago i replaced the power button, do you think it could be a bootloader issue or just the micro-usb port?; when you fixed yours, do you think i should take it completely off and resolder?
Any advice will be really appreciated!!
Thanks
moparfreak426 said:
Yeah i fixed mine.... I always end up fixing all my electronic problems... But i lost my charger so i still use a battery wall charger... Used my brothers charger to test my fix
Sent from an Apple killing JellyBean
Click to expand...
Click to collapse
Hi, i have a similar problem but i'm not sure it's the same, i happened a few days ago when myi changed the battery and pugged in the charger, i noticed there was something strange, the phone's screen showed the battery was charging before i pugged in back (just when i placed the new battery). Now it behaves as it's always plugged in charging just when placing the battery in, the phones is turned off and the screen shows charging battery icon (i've tried 2 more batteries), and also there's no usb connection to the PC either.
It's a very bothering problem, the phons won't go into deep sleep, and the screen goes to the screensaver all the time (as it where pugged in charging)...
I always repair my own electronics, months ago i replaced the power button, do you think it could be a bootloader issue or just the micro-usb port?; when you fixed yours, do you think i should take it completely off and resolder?
Any advice will be really appreciated!!
Thanks

Fast Charging No Longer Working

I wanted to share this in case anyone ever experiences the same problem. I had my Note 4 since it was released in October and didn't have any issues until roughly a week ago. All of a sudden, the phone would not fast charge. Whenever connected to the fast charging adapter, it would detect it and charge, but it would not give the fast charge notification and would charge extremely slowly (8 hours to get a full charge from near empty). In addition, my PCs would no longer be able to access it and the phone would not give the MTP option menu when connected. I tried multiple cables, outlets, fast chargers, and batteries in addition to toggling the fast charge setting, wiping the cache, and performing a factory reset - but nothing helped. I finally called verizon and they sent me a new note 4 and everything was working again.....
Three days passed and the same exact issue occurred again on the replacement phone. This makes me believe that the Samsung charger I have has somehow deteriorated and is now breaking the usb connectivity on the phone. I contacted samsung and am getting a replacement for the charger and will have to get ANOTHER replacement phone from verizon (after they finish processing my first replacement).
So if anyone has a similar issue, I would suggest getting a new charger in addition to the phone replacement so you don't have to go through the entire process again. I could be wrong that the charger caused this, but I can't think of anything else besides the recent lollipop upgrade - but everything was working for several days on lollipop for both phones.
If anyone has ideas on how to fix this, please let me know. I can't return the second phone until the first one is processed so no fast charging or PC connection until then. Thanks
Having exactly the same issues. Let me know if you work it out.
maliciousintent said:
Having exactly the same issues. Let me know if you work it out.
Click to expand...
Click to collapse
Same Issues and I have three fast chargers so it is not the charger it is the phone or the 5.0 update.
Mine was not really even charging unless I turned the phone off. I called Verizon and they are sending me a replacement phone overnight. It would not connect to the computer either. I hope this is not a result of fast charging, if so they are gonna get a lot of phone calls
I also have another fast charger which wasn't working... I was thinking that my main charger was breaking the phones USB connectivity and fast charging, but if others are having the same problem then I am wondering if it is something related to the lollipop update. I am replacing the main charger and should have another replacement note 4 come Friday. If it happens again, then I think it points to the lollipop update since both phones had this issues days after lollipop was installed.
I'll let you guys know the outcome
Had the same issue. Used a different wire. Solved the problem. Any Micro USB that can transfer data, can use fast charge. If it's a "power only" cable, or if the data pins/wires are messed up, no fast charge.
graydiggy said:
Had the same issue. Used a different wire. Solved the problem. Any Micro USB that can transfer data, can use fast charge. If it's a "power only" cable, or if the data pins/wires are messed up, no fast charge.
Click to expand...
Click to collapse
Well the problem was that all the cables were working and then stopped. When I got the replacement phone they worked and then a few days later the same thing happened again. So something was causing the connection to break completely. I am hoping that the cause was the charger which I am replacing.
Word of advice: if it stops charging normally In ANY way. THROW AWAY THE CHARGER. I made the same mistake and my Note 4 literally lit on fire melting the lower 1/2 inch of my phone and completely melting the charger. It was so hot by the time I was able to yank the cord out both the phone and charger were melted and destroyed and I ended up with three fingers with minor burns. I am lucky it did not happen when I was sleeping with my infant nearby. I now charge my phone only in the day and on a granite counter in case of fire again.
It stopped fast charging. Then I used the charger again and got a message saying "Transferring power to high powered device" then wham 2" flames
Verizon kept claiming it couldnt happen and thought I used a aftermarket charger until I brought the phone and charger to a corporate store and they prompytly replaced both the phone and charger under factory warranty.
I have three samsung original fast chargers and none of them worked plus the fact that the phone could not be connected to any computer I have makes me think it was the phone. I got the new phone today so I guess time will tell. I just can't see three chargers and cables going bad all at the same time. I also did not take the 5.0 update on the new phone.
my replacement phone stopped fast charging and computer will not recognize it now. I used a different cable that was plugged into the fast charge module from Samsung. I guess that is what caused it. They are sending another phone but for C sake if a cable is the reason this happens surely there should be a fix without replacing the phone time after time.
I finally received the new phone from Verizon and I replaced all the cables I was using to make sure this doesn't happen again. Hopefully the charger was the culprit and the problem is over and done with. Hope no one else encounters this as it really was a pain to deal with.
I got my third phone Monday and so far so good. I had a car charger from Verizon plugged into an extender that had 4 plugs in it. When I unplugged my GPS from it I noticed it was very hot. The Verizon Charger was also hot even though nothing was plugged into it. This may have been what caused my issue. It could have overheated. I replaced it with a different brand and tested to make sure it stayed cool when anything was plugged in and have used it all week without issues. The only other thing could have been the USB cable I used the evening before the second phone stopped fast charging so I do not use it either. So if you use a car charger extender check to see if it gets hot when anything is plugged in. BUT, it is scary knowing something like this can kill the USB on this phone.
I have an external Hard-drive that would constantly disconnect and reconnect with the slightest movement of the cord connected to the computer. It even caused my H/D to get corrupted twice requiring re-formatting. But all I had to do to fix it was to squeeze the big connector on the cord a little and tighten it up. Just a thought.
It's been a week since I received my third phone and everything is working perfectly. I can only assume the charger was breaking it and I'm glad the issue is behind me.
So for anyone experiencing this, I suggest contacting Samsung to replace the charger before going to your cell provider to replace the phone
I'm having the same exact problem. My 2nd replacement phone is now doing the same thing as the first one. I have too many scenarios now though and I'm confused as to which it is. I have two Adaptive chargers.. Batteries, phone, or chargers...
As soon as I replaced the charger, I didn't have this issue again. I suggest sending your chargers back to Samsung (or whatever other brand you have) because one of them is breaking the phones
Sent from my Nexus 6 using Tapatalk
I would place my bet on a bad cable. With the higher voltages that fast charge uses going through the danger of arching and sparking is increased especially if there's a poor connection would fry or weld melt metal inside the connector. This could damage the USB port in the phone and cause the phone's USB port to have a bad connection. This bad USB port in the phone could fry the other cables as well leaving you wondering why everything went bad all at once
My phone will fast charge on my two vehicle chargers (at 1.5 amps and 2.1 amps), but refuses to change any faster than 500 mA on two separate fast charger bricks. The same bricks work fine for fast charging other phones, so it's my phone, not the charging hardware. I'm using the same cable(s) for all instances, which leads me to believe that something is wrong with how the phone interprets the "smart charging" signal on the bricks, or that the phone is sending the wrong charging signal.
I can still connect to a computer just fine, so my issue may be different.
Does anyone else have the issue with bricks but not with chargers without "smart charging" capabilities?
I've had this problem on stock 5.1.1, Jasmine rom 6.0.1, and now CM13. I full wiped everything when reinstalling, so either it's hardware, or an issue propigated through many roms. I've tried a few different kernels too, just to see if that was the problem.
I'm changing the battery tomorrow to check that possibility. Maybe I'll bend the contact a slight bit and see what happens (phone catches on fire)...
Hi guys
I have the same problem as you ,so what I have to do to solve this issue without replace the phone,
I have rooted 5.1.1 stock rom, If i flash full stock rom 5.1.1 does this help or what?
zediiiii said:
My phone will fast charge on my two vehicle chargers (at 1.5 amps and 2.1 amps), but refuses to change any faster than 500 mA on two separate fast charger bricks. The same bricks work fine for fast charging other phones, so it's my phone, not the charging hardware. I'm using the same cable(s) for all instances, which leads me to believe that something is wrong with how the phone interprets the "smart charging" signal on the bricks, or that the phone is sending the wrong charging signal.
I can still connect to a computer just fine, so my issue may be different.
Does anyone else have the issue with bricks but not with chargers without "smart charging" capabilities?
I've had this problem on stock 5.1.1, Jasmine rom 6.0.1, and now CM13. I full wiped everything when reinstalling, so either it's hardware, or an issue propigated through many roms. I've tried a few different kernels too, just to see if that was the problem.
I'm changing the battery tomorrow to check that possibility. Maybe I'll bend the contact a slight bit and see what happens (phone catches on fire)...
Click to expand...
Click to collapse
Turns out one out of the three new cables I bought didn't work, and my OEM cable didn't work for fast charging. Swapping for a good cable fixed the issue.

Categories

Resources