When I tried to install the Justin's T-Mobile ROM to LS980 with ZVA version through TWRP, I got a boot loop (TWRP recovery image was installed via Flasify). Restored the factory ROM and tried to flash again, but I got the same boot loop. Is it due to the fact that the phone is on ZVA?
I read in the forum that I can use FreeGee to flash TWRP for LS980 ZVA, but it seems it does not help as well.
Do I need to go back to earlier version (ZV8 or ZV9?) to flash the T-Mobile ROM or is there a way to flash the ROM without going back?
Thanks for help in advance!
here is what i did
cherishzm said:
When I tried to install the Justin's T-Mobile ROM to LS980 with ZVA version through TWRP, I got a boot loop (TWRP recovery image was installed via Flasify). Restored the factory ROM and tried to flash again, but I got the same boot loop. Is it due to the fact that the phone is on ZVA?
I read in the forum that I can use FreeGee to flash TWRP for LS980 ZVA, but it seems it does not help as well.
Do I need to go back to earlier version (ZV8 or ZV9?) to flash the T-Mobile ROM or is there a way to flash the ROM without going back?
Thanks for help in advance!
Click to expand...
Click to collapse
I flashed the zv 7aboot file installled lokied twrp then from twrp did full wipe installed rom then flashed ls 980zv8 radio
do not reboot after flashing rom flash the radio then boot up you should be good. i got this info from the the tmobile cm11 working on sprint thread
it worked for me. I would check out that thread if i were you. hope it helps!
stillblaze01 said:
I flashed the zv 7aboot file installled lokied twrp then from twrp did full wipe installed rom then flashed ls 980zv8 radio
do not reboot after flashing rom flash the radio then boot up you should be good. i got this info from the the tmobile cm11 working on sprint thread
it worked for me. I would check out that thread if i were you. hope it helps!
Click to expand...
Click to collapse
Thanks for the reply. Do you know where I can find files to flash radio? I'll read the cm11 thread and see if I can find more info on that.
EDIT:Flashed ZV8 Radio after flashing the T-Mobile ROM it appears booting but I'm getting following error messages:
Unfortunately, the process com.android.phone has stopped
Unfortunately, VoIP call has stopped.
These messages keep popping up after pressing OK so I cannot get to the main screen.
What do I need to do now?
Well, I tried to flash the T-Mobile ROM again and it works fine now (without flashing the ZV8 again after flashing the ROM)!
cherishzm said:
Well, I tried to flash the T-Mobile ROM again and it works fine now (without flashing the ZV8 again after flashing the ROM)!
Click to expand...
Click to collapse
once you flash a radio like you stated. flashed the ZV8 after the rom you dont ever need to do that unless you recover from a TOT. file or switch your radio at some point. once you flash it your good man
and just in-case you didn't know your posting questions in the development area i see you did it twice so i figured you might think your in Q&A
are you using a t-mobile or att based sim card?
Shouldn't this post be in General or Q&A???
Are you good?
if you need any files or help let me know id be happy to help
Which rom is Justin's rom?? I have been searching and I cannot find something named justin's rom.
Can someone kindly point me to a link of the rom.
Thank you for your time.
jub2k3 said:
Which rom is Justin's rom?? I have been searching and I cannot find something named justin's rom.
Can someone kindly point me to a link of the rom.
Thank you for your time.
Click to expand...
Click to collapse
https://docs.google.com/file/d/0B6HYWZRx8JLsZm9rVU5sWjZSTjA/edit?usp=docslist_api
I like my phones like I like my women.... flexible
Got the link thanks. Now im trying to find a clean efs because my backup with freegee doesnt install and the one ioroot was supposed to create does not exist.
Sent from my GT-N5110 using Tapatalk
Google Play Store - No Connection Issue
Hello everyone,
I have flashed Justin's T-Mobile ROM onto my LS980 (Sprint G2) successfully after flashing ZV8 radio.
However, Google Play Store started giving me an error message - 'No Connection'.
I tried to follow the fix in the following thread but when I opened the hosts file there was already " 127.0.0.1 localhost" at the first line. I deleted the hosts file entirely and restarted the phone but it did not work either.
http://forum.xda-developers.com/showthread.php?t=2273994
Does anyone know what I need to do to get Play Store working again? When I factory reset it, it will start working but after few downloads, it stops working and displays the same 'No Connection' error message.
By the way, I have force closed 'automatic update' app disabled notification. Is it possibly why?
Any help will be appreciated!!
stillblaze01 said:
if you need any files or help let me know id be happy to help
Click to expand...
Click to collapse
Im having issues. The link for the Justin rom is no longer available. i lost my recovery and can only go into download mode. i have no idea how to flash recovery through adb. Do need to install the T Mobile drivers? I have the sprint drivers already installed. The phone doesnt stay on long enough for me to use the simple tool either.
DL mode
bhzmafia said:
Im having issues. The link for the Justin rom is no longer available. i lost my recovery and can only go into download mode. i have no idea how to flash recovery through adb. Do need to install the T Mobile drivers? I have the sprint drivers already installed. The phone doesnt stay on long enough for me to use the simple tool either.
Click to expand...
Click to collapse
In down load mode I would flash tot file then root and install rom if you still need a rom I have a stock tmobile rom not sure if its Justins and I should have a Cm11 running around let me know
Related
hey everyone , excuse my english iam still beginner.
i have i747 ATT and i was running on 4.2.1 , but i decide to get updated with 4.3 , i did download it and flash it but after doing all that the phone stops at setup screen showing nothing except apps has stop working example. unfortunately Samsung cloud data relay has stopped
please help and what i should do , thanks to you all
salahddine said:
hey everyone , excuse my english iam still beginner.
i have i747 ATT and i was running on 4.2.1 , but i decide to get updated with 4.3 , i did download it and flash it but after doing all that the phone stops at setup screen showing nothing except apps has stop working example. unfortunately Samsung cloud data relay has stopped
please help and what i should do , thanks to you all
Click to expand...
Click to collapse
Did you mean 4.1.2 or were you running a custom ROM as there is no official 4.2.1 for the i747? How did you download and flash the 4.3 ROM?
Can you try booting into recovery and doing a hard wipe/reset from there? If this doesn't solve it, then you may need to restore the system image via custom recovery.
Larry2999 said:
Did you mean 4.1.2 or were you running a custom ROM as there is no official 4.2.1 for the i747? How did you download and flash the 4.3 ROM?
Can you try booting into recovery and doing a hard wipe/reset from there? If this doesn't solve it, then you may need to restore the system image via custom recovery.
Click to expand...
Click to collapse
yes sorry i mean . 4.1.2 , i can boot to recovery mode and download mode too , i did wipe cash i did wipe data too but nothing works ,
Stock OTA Update 4.3 I747UCUEMJB 623.1MB , i did download that rom , if you need to know anything else please ask i really need your help
salahddine said:
yes sorry i mean . 4.1.2 , i can boot to recovery mode and download mode too , i did wipe cash i did wipe data too but nothing works ,
Stock OTA Update 4.3 I747UCUEMJB 623.1MB , i did download that rom , if you need to know anything else please ask i really need your help
Click to expand...
Click to collapse
You updated to 4.3 by going over the air or via Odin?
audit13 said:
You updated to 4.3 by going over the air or via Odin?
Click to expand...
Click to collapse
The 623mb file sounds like the stock image for (official) OTA updates. Most likely it was downloaded and flashed as a zip via recovery. I'm not quite sure it works that way.
Salahddine, since you can get into download and recovery modes, your best option now may be to do a complete stock restore via custom recovery. See the thread below for instructions. You may need to first flash custom recovery although I'd guess you probably have custom recovery installed already.
http://forum.xda-developers.com/showthread.php?t=2658486
Download the relevant file posted in the link to your phone's internal SD card or to an external micro SDHC card and place in your phone. Boot into recovery mode and flash the zip. Hopefully, this should fix it.
Larry2999 said:
The 623mb file sounds like the stock image for (official) OTA updates. Most likely it was downloaded and flashed as a zip via recovery. I'm not quite sure it works that way.
Salahddine, since you can get into download and recovery modes, your best option now may be to do a complete stock restore via custom recovery. See the thread below for instructions. You may need to first flash custom recovery although I'd guess you probably have custom recovery installed already.
http://forum.xda-developers.com/showthread.php?t=2658486
Download the relevant file posted in the link to your phone's internal SD card or to an external micro SDHC card and place in your phone. Boot into recovery mode and flash the zip. Hopefully, this should fix it.
Click to expand...
Click to collapse
audit13 said:
You updated to 4.3 by going over the air or via Odin?
Click to expand...
Click to collapse
thank you all for your support and caring , i did downgrade it to 4.0.4 , then i did face some problems like messaging stopped working and other things , then i did install RCWM 6.0.4.3 via odin , then i did install custom rom , then i did install d2att_I747UCUEMJ2_root_noknox and now everything works fine . i thank you all again for your caring
and about your question iam from morocco i cant get ON THE AIR , i did try it many times but didnt work so i did download that stock ROM 623 mb and i did flash from sd card
salahddine said:
thank you all for your support and caring , i did downgrade it to 4.0.4 , then i did face some problems like messaging stopped working and other things , then i did install RCWM 6.0.4.3 via odin , then i did install custom rom , then i did install d2att_I747UCUEMJ2_root_noknox and now everything works fine . i thank you all again for your caring
and about your question iam from morocco i cant get ON THE AIR , i did try it many times but didnt work so i did download that stock ROM 623 mb and i did flash from sd card
Click to expand...
Click to collapse
Sorry, my initial assessment was wrong. The 623MB zip you flashed was not the OTA file but the stock ROM which should have been flashed along with the modem and kernel zips at the same time. The reason for the initial failure was likely because you did not flash the kernel (and modem) zips. Glad to know it's working fine now.
Hey all, I need some help. I bricked my phone, and I can only get into download mode and recovery. Flashing through odin fails each time, and so does flashing through recovery. Gives me a status 7 error. Ive made sure I'm downloading all the proper files, but Im stumped here. My phone also isnt recognized in Kies. Ive uninstalled and reinstalled the drivers multiple times now. Im too nervous to go to an AT&T store because theyll see I voided my warranty from the recovery (using philz recovery).
Anyone got any clue on what Im doing wrong? Any help would be much appreciated.
Syst3m Deadlock said:
Hey all, I need some help. I bricked my phone, and I can only get into download mode and recovery. Flashing through odin fails each time, and so does flashing through recovery. Gives me a status 7 error. Ive made sure I'm downloading all the proper files, but Im stumped here. My phone also isnt recognized in Kies. Ive uninstalled and reinstalled the drivers multiple times now. Im too nervous to go to an AT&T store because theyll see I voided my warranty from the recovery (using philz recovery).
Anyone got any clue on what Im doing wrong? Any help would be much appreciated.
Click to expand...
Click to collapse
EDIT: In your sig, it says you have an S2? this is the S3 section.
What happened exactly to soft-brick?
The software you're flashing with Odin might not be good, try another one. Also, since you can get in recovery, you can try clean flashing the ROM you had running previous to the brick.
BWolf56 said:
EDIT: In your sig, it says you have an S2? this is the S3 section.
What happened exactly to soft-brick?
The software you're flashing with Odin might not be good, try another one. Also, since you can get in recovery, you can try clean flashing the ROM you had running previous to the brick.
Click to expand...
Click to collapse
I have an S3 now, just havent updated my sig.
And I was trying to root. I was on the latest stock 4.4.2 and flashed the wrong file by mistake. Forgot what it was. So now I cant flash any files in recovery or odin. It just fails each and every time. I know all these files cant be bad
So root wasnt successful and now I cant even revert back to stock
Kies interferes with odin. Uninstall it from your computer and try odin again.
DocHoliday77 said:
Kies interferes with odin. Uninstall it from your computer and try odin again.
Click to expand...
Click to collapse
Still didnt work. Odin let me install a recovery file, but it just wont let me install files to restore back to stock. Same with recovery, I'm still getting the status 7 error. It doesnt make any sense. Ive downloaded and redownloaded from different places, so I highly doubt that all these files are bad
Are you running the latest Philz? Sometimes, the status 7 error occurs with an outdated recovery. Have you tried flashing a custom ROM with TWRP?
audit13 said:
Are you running the latest Philz? Sometimes, the status 7 error occurs with an outdated recovery. Have you tried flashing a custom ROM with TWRP?
Click to expand...
Click to collapse
I'm running 6.0.5 - no I haven't tried TWRP
What rom were you running before? What do you want to be running now?
And what is your current firmware/bootloader version? Not sure about philz recovery, but status 7 errors usually occur when you dont have the required firmware build.
Also, at least for the T999, cm roms updater-scripts are outdated. So if we have the newest available, it still gives the status 7 errors because the new builds haven't been added. Just thought I'd mention this in case you're updated to the new kk firmware and are trying to flash a cm rom.
DocHoliday77 said:
What rom were you running before? What do you want to be running now?
And what is your current firmware/bootloader version? Not sure about philz recovery, but status 7 errors usually occur when you dont have the required firmware build.
Also, at least for the T999, cm roms updater-scripts are outdated. So if we have the newest available, it still gives the status 7 errors because the new builds haven't been added. Just thought I'd mention this in case you're updated to the new kk firmware and are trying to flash a cm rom.
Click to expand...
Click to collapse
I was running official 4.4 unrooted. I'm trying to install Likewise S5.
Install terminal emulator from the play store and enter this:
getprop ro.bootloader
If it returns I747UCUEMJB you should be ok to flash likewise and something else is preventing it. If its anyway but that, you probably need to update your base firmware/bootloaders first.
If you're still unable to boot anything, the build should be shown on the Download Mode screen. You can probably reflash your previous rom and boot to that for right now though.
I was able to get a custom ROM installed, but now I have no reception. Im guessing the bootloader needs to be updated. So I tried updating it via odin. That failed. I also tried flashing it in recovery and still got a status 7 error. Im at my whits end here
You probably need to flash your modem. Run the Terminal Emulator command I posted before, and if it returns I747UCUEMJB, flash the MJB modem. If it returns anything else, flash the modem that matches, but let us know first just to be on the safe side.
DocHoliday77 said:
You probably need to flash your modem. Run the Terminal Emulator command I posted before, and if it returns I747UCUEMJB, flash the MJB modem. If it returns anything else, flash the modem that matches, but let us know first just to be on the safe side.
Click to expand...
Click to collapse
Terminal Emulator tells me my bootloader is 1747UCUFNE4
Syst3m Deadlock said:
Terminal Emulator tells me my bootloader is 1747UCUFNE4
Click to expand...
Click to collapse
So yeah, you need the 1747UCUFNE4 baseband. Look in Settings/About Phone to know which one you have before going and flashing it.
BWolf56 said:
So yeah, you need the 1747UCUFNE4 baseband. Look in Settings/About Phone to know which one you have before going and flashing it.
Click to expand...
Click to collapse
I cant seem to find the 1747UCUFNE4 baseband,
Syst3m Deadlock said:
I cant seem to find the 1747UCUFNE4 baseband,
Click to expand...
Click to collapse
Did you check which one you have atm?
And here, from Doc http://forum.xda-developers.com/showpost.php?p=53626873&postcount=4
BWolf56 said:
Did you check which one you have atm?
And here, from Doc http://forum.xda-developers.com/showpost.php?p=53626873&postcount=4
Click to expand...
Click to collapse
Thanks a bunch, it worked!!!
So I've been at this for a while now. I've had no issue flashing to LiquidSmooth's Liquid-JB-v2.7-UNOFFICIAL-d710 Android 4.2.2, but I can't for the life of me get this thing to install a version of 4.3.x or 4.4.x.
Right now, I've rolled back to: Rwilco12's SPH-D710_GB27_1014481_Rooted_Nodata.exe Android 4.1.2.
I have CM 11, but when I try to install it using recovery mode, it errors out and aborts the install. All the instructions I find, keep telling me to install CM's 10.2 and then update the bootloader, but I can't find links to the old versions to any of these.
Is there anything in 4.3.x or 4.4.x that has a 1 click Odin install? Or can someone walk me through taking this thing from GB27 to something new? I believe it is rooted per Rwilco's image name.
chosos said:
So I've been at this for a while now. I've had no issue flashing to LiquidSmooth's Liquid-JB-v2.7-UNOFFICIAL-d710 Android 4.2.2, but I can't for the life of me get this thing to install a version of 4.3.x or 4.4.x.
Right now, I've rolled back to: Rwilco12's SPH-D710_GB27_1014481_Rooted_Nodata.exe Android 4.1.2.
I have CM 11, but when I try to install it using recovery mode, it errors out and aborts the install. All the instructions I find, keep telling me to install CM's 10.2 and then update the bootloader, but I can't find links to the old versions to any of these.
Is there anything in 4.3.x or 4.4.x that has a 1 click Odin install? Or can someone walk me through taking this thing from GB27 to something new? I believe it is rooted per Rwilco's image name.
Click to expand...
Click to collapse
Change the recovery that your using. What doesn't flash in ClockworkMod might flash perfectly in Philz Recovery or TWRP.
Sent from my 710C using XDA Free mobile app
I'm going to need more help with that aspect. I've tried that. I have TWRP in a zip file that I've tried to install. I downloaded TWRP Manager from the App store. I downloaded Rom manager. Nothing seems to be working. When I select reboot into recovery, it just goes to the stock android recovery and says it failed.
I am able to install E4GT-EL29-directbootCWM-v3.tar.md5
or StockCWM-EL26.tar.md5 using Odin, but no luck installing TWRP.
I'm sure I'm doing something wrong, but I have no idea what. This is likely a simple process, but I don't know which files or what order to do this in.
When I flash to E4GT-EL29-directbootCWM-v3.tar.md5 from Odin, it leaves me in recovery mode until I install LiquidSmooth 4.2.x.
chosos said:
I'm going to need more help with that aspect. I've tried that. I have TWRP in a zip file that I've tried to install. I downloaded TWRP Manager from the App store. I downloaded Rom manager. Nothing seems to be working. When I select reboot into recovery, it just goes to the stock android recovery and says it failed.
I am able to install E4GT-EL29-directbootCWM-v3.tar.md5
or StockCWM-EL26.tar.md5 using Odin, but no luck installing TWRP.
I'm sure I'm doing something wrong, but I have no idea what. This is likely a simple process, but I don't know which files or what order to do this in.
When I flash to E4GT-EL29-directbootCWM-v3.tar.md5 from Odin, it leaves me in recovery mode until I install LiquidSmooth 4.2.x.
Click to expand...
Click to collapse
There are already numerous threads here with the same question and answer [emoji6]
Surj138 said:
There are already numerous threads here with the same question and answer [emoji6]
Click to expand...
Click to collapse
Yeah? shoot me the link for one that is working. I was reading all night - most link to threads from 2013 with links that are all broken. You want to send me a working one - great
Most start from something newer, older, etc. Everything I found on GB27 didn't work. Right now, I'm on GB27, with an e3 recovery image from RWilco. I can use the guides to get me from there to Liquidsmooth 4.2.x, but any progress beyond that doesn't work, and I don't want to brick the phone.
chosos said:
Yeah? shoot me the link for one that is working. I was reading all night - most link to threads from 2013 with links that are all broken. You want to send me a working one - great
Most start from something newer, older, etc. Everything I found on GB27 didn't work. Right now, I'm on GB27, with an e3 recovery image from RWilco. I can use the guides to get me from there to Liquidsmooth 4.2.x, but any progress beyond that doesn't work, and I don't want to brick the phone.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=55623318
http://forum.xda-developers.com/showthread.php?p=50070702
http://forum.xda-developers.com/showthread.php?p=55542264
This should get you going, but let me know if you need any further assistance
Good luck! [emoji2]
Surj138 said:
http://forum.xda-developers.com/showthread.php?p=55623318
http://forum.xda-developers.com/showthread.php?p=50070702
http://forum.xda-developers.com/showthread.php?p=55542264
This should get you going, but let me know if you need any further assistance
Good luck! [emoji2]
Click to expand...
Click to collapse
Thanks, this got me through it. I ended up using philz_touch_6.15.9-d710.tar to install Cyanogen 11 and gapps for 4.4.2.
Should I be all done now, or would there be more things I'd have to install? I never did anything with the modem files. I also only plan on using this as a PDA so I'm not sure if that is needed.
chosos said:
Thanks, this got me through it. I ended up using philz_touch_6.15.9-d710.tar to install Cyanogen 11 and gapps for 4.4.2.
Should I be all done now, or would there be more things I'd have to install? I never did anything with the modem files. I also only plan on using this as a PDA so I'm not sure if that is needed.
Click to expand...
Click to collapse
If you never flashed anything modem-wise, then you're still running the GB27 (JB) modem. You'll need a Gingerbread or ICS modem only if you want working 3g data/MMS messaging.
Otherwise, JB modems shouldn't cause any problems that I know of.
Hello all.
So, as a noob, I rooted my tab S successfully and was playing around with the TWRP recovery settings and accidentally deleted my OS. I was able to flash a stock version of Android but now it is stuck in a loop and I have no way of getting it past the loading screen. I am able to access the download mode but I can get no further than that. Is there anyway that you can help me with resetting my device? Could any of you also link me to a thread which can help me unroot my tab so that I can reroot it using CF auto root with TWRP recovery mode installed?
That would be greatly appreciated. Thanks.
My model number is: SM-T800NZWAXAR
Wipe Data then flash again, wait at least 10 mins for for first boot.
We flashed tamirda's phoenix rom. I can't even explain the whole process because my cousin helped us out with that, but thanks!!!
Zwhlol-Zniper said:
We flashed tamirda's phoenix rom. I can't even explain the whole process because my cousin helped us out with that, but thanks!!!
Click to expand...
Click to collapse
Flash the required custom ROM, or reflash the stock rom
tra_dax
tra_dax said:
Flash the required custom ROM, or reflash the stock rom
tra_dax
Click to expand...
Click to collapse
Now, I flashed the update but it removed my g-apps and my twrp. Is there a way that I can add those while still preserving the rom?
I will post of this issue in the official thread and see if I can get an answer there as well.
Thanks.
Zwhlol-Zniper said:
Now, I flashed the update but it removed my g-apps and my twrp. Is there a way that I can add those while still preserving the rom?
I will post of this issue in the official thread and see if I can get an answer there as well.
Thanks.
Click to expand...
Click to collapse
If u think I helped u then hit the thx button.???
tra_dax
I'm afraid I didn't get an answer from you. I asked for a link but I didn't get one. But you also suggested that I flashed the rom from or custom recovery. Correct me if there is anything wrong in the process that me and my cousin discovered. I probably forgot to mention that I had a T-800 but anyways.
From a prior, we did an ADB sideload of TWRPrecovery. It tooks my cousin a while to find the stuff, but he was able to reinstall the device drivers and sideload it into the system memory. From there, he uploaded the rom installer, which was done through aroma, at that point. Then. we installed, Gapps and customized it to include the services that I want. The rom worked perfectly.
But I messed up when I flashed the OTA through ODIN rather than through twrp. It deleted the custom recovery and a popup saying that gapps could not be located was annoyingly in the way.
So at this point. We were able to root the tablet. then flash the custom recovery. First we loaded the recovery, the actual rom. then gapps, and finally the OTA from the tablet memory. In hindsight, we decided to do this after trying to install straight gapps from the OTA and gapps kept giving an error code 70. After loading everything onto the rom, it worked.
Now I do have a question about xposed. Would I have to flash that in recovery if I wanted to take access of its features? Is there a link on how to use it? Or does that depend on xposed and how well my rom could support it?
Well I won't suggest u to flash xposed since it can give u bootloop problems and I m sure u won't wanna take a risk. But if u really want it then tell me.
And for installing the zip first u will need a deodexed rom installed on ur device
tra_dax
Yeah. I found out the hard way that my device can easily get boot looped with too many modules. I do have a back up ready and a method for wiping and resetting the device.
Zwhlol-Zniper said:
Yeah. I found out the hard way that my device can easily get boot looped with too many modules. I do have a back up ready and a method for wiping and resetting the device.
Click to expand...
Click to collapse
U will need a de-odexed ROM. If u don't get one, i'll find the way to make the firmware de-odexed. Here's the xposed apk and the zip file:
http://forum.xda-developers.com/attachment.php?attachmentid=3333763&d=1432712436
tra_dax
I'll send you a link to the code version that I used with the rom that I ask using.
Sent from my SM-N910V using Tapatalk
tra_dax said:
U will need a de-odexed ROM. If u don't get one, i'll find the way to make the firmware de-odexed. Here's the xposed apk and the zip file:
http://forum.xda-developers.com/attachment.php?attachmentid=3333763&d=1432712436
tra_dax
Click to expand...
Click to collapse
Practically every custom rom in the dev section is deodexed.
ashyx said:
Practically every custom rom in the dev section is deodexed.
Click to expand...
Click to collapse
Yeah u right. A custom too is a deodexed ROM.
tra_dax
This is @tamirda's rom. http://forum.xda-developers.com/showthread.php?t=3222264
And here is the link to the xposed framework. http://forum.xda-developers.com/showthread.php?t=3113463
Zwhlol-Zniper said:
This is @tamirda's rom. http://forum.xda-developers.com/showthread.php?t=3222264
And here is the link to the xposed framework. http://forum.xda-developers.com/showthread.php?t=3113463
Click to expand...
Click to collapse
OK, the ROM is the right one, get the v3 xposed by arter97.
tra_dax
tra_dax said:
OK, the ROM is the right one, get the v3 xposed by arter97.
tra_dax
Click to expand...
Click to collapse
V3? V75 is the latest version.
According to one user, they tried to flash the latest version's framework only to have it stuck in a boot loop. I tried a 71 exynos file because another user recommended it as the most stable framework for the poster with that issue.
Sent from my SM-N910V using Tapatalk
Zwhlol-Zniper said:
According to one user, they tried to flash the latest version's framework only to have it stuck in a boot loop. I tried a 71 exynos file because another user recommended it as the most stable framework for the poster with that issue.
Sent from my SM-N910V using Tapatalk
Click to expand...
Click to collapse
Well then now do u think I helped u? If yes then hit the thx button. I won't force u to do that but it will help me to help more person.
tra_dax
I how do I do it in tapatalk?
Sent from my SM-N910V using Tapatalk
Zwhlol-Zniper said:
According to one user, they tried to flash the latest version's framework only to have it stuck in a boot loop. I tried a 71 exynos file because another user recommended it as the most stable framework for the poster with that issue.
Sent from my SM-N910V using Tapatalk
Click to expand...
Click to collapse
Then they flashed the wrong one. The latest version is working just fine.
I loaded CM-13.0 nightly and have Been updating as the updates come but when I go to make a call it takes forever to go through and start ringing and sometimes it r just hangs up. The data keeps going from LTE to nothing and no SIM . I can't get mms either. Can someone tell me what to do.thanks.
Sent from my SGH-T999 using Tapatalk
HUCCG said:
I loaded CM-13.0 nightly and have Been updating as the updates come but when I go to make a call it takes forever to go through and start ringing and sometimes it r just hangs up. The data keeps going from LTE to nothing and no SIM . I can't get mms either. Can someone tell me what to do.thanks.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Same thing is happening to me. I've tried using OctOs M and now I am on PacRom 6.0.1 and I am having the same "No sim card" error. I can text and call, but no Data whatsoever.
Have you tried changing your APN settings for your network on your phone?
wmzed said:
Same thing is happening to me. I've tried using OctOs M and now I am on PacRom 6.0.1 and I am having the same "No sim card" error. I can text and call, but no Data whatsoever.
Have you tried changing your APN settings for your network on your phone?
Click to expand...
Click to collapse
are you on the latest baseband for your phone?
ratchetrizzo said:
are you on the latest baseband for your phone?
Click to expand...
Click to collapse
My stock OS Is 4.1.2 and is running Baseband UVAMB7. Do I need to go for the higher updates for the LTE to work?
wmzed said:
My stock OS Is 4.1.2 and is running Baseband UVAMB7. Do I need to go for the higher updates for the LTE to work?
Click to expand...
Click to collapse
I think you need to be on UVUBOH1.
https://forum.xda-developers.com/showthread.php?t=1949687 has the list of FW and it looks like you are using a super super old baseband.
ratchetrizzo said:
I think you need to be on UVUBOH1.
https://forum.xda-developers.com/showthread.php?t=1949687 has the list of FW and it looks like you are using a super super old baseband.
Click to expand...
Click to collapse
Do I need to use ODIN for this? I tried installing UVUBOH1 with TWRP, but I get an error when I installing it:
"could not find 'META-INF/com/google/android/update-binary' in the zip file"
wmzed said:
Do I need to use ODIN for this? I tried installing UVUBOH1 with TWRP, but I get an error when I installing it:
"could not find 'META-INF/com/google/android/update-binary' in the zip file"
Click to expand...
Click to collapse
Yes, download https://www.androidfilehost.com/?fid=24052804347821137
NOTE, if you click on "UVUBOH1" and not the androidfilehost link in the FW thread, it links you to the wrong FW and you'll flash UVUBNC1! Make sure you click the androidfilehost link underneath UVUB0H1.
Then flash it with odin.
Afterwards let it reboot and upgrade, then odin TWRP back and either restore a nandroid or flash the rom of your choosing
Oh also, if you're still on 4.1 and on a touchwiz rom, you may want to factory unlock it before you upgrade.. Just because you can. Follow the unlock thread on here
ratchetrizzo said:
Yes, download https://www.androidfilehost.com/?fid=24052804347821137
NOTE, if you click on "UVUBOH1" and not the androidfilehost link in the FW thread, it links you to the wrong FW and you'll flash UVUBNC1! Make sure you click the androidfilehost link underneath UVUB0H1.
Then flash it with odin.
Afterwards let it reboot and upgrade, then odin TWRP back and either restore a nandroid or flash the rom of your choosing
Oh also, if you're still on 4.1 and on a touchwiz rom, you may want to factory unlock it before you upgrade.. Just because you can. Follow the unlock thread on here
Click to expand...
Click to collapse
Thank you so much! I will try this out soon and respond with the results! And I had already unlocked my device :. I had to root and use the RegionLock app to unlock it, as the *#197328640# menu option did not work for me.
wmzed said:
Thank you so much! I will try this out soon and respond with the results! And I had already unlocked my device :. I had to root and use the RegionLock app to unlock it, as the *#197328640# menu option did not work for me.
Click to expand...
Click to collapse
how did you make out?
ratchetrizzo said:
how did you make out?
Click to expand...
Click to collapse
Was quite a bit of trouble at first . I managed to download and flash the software. flashed TWRP via odin.
Then through TWRP, I rooted by using the Knox remover zip (as i was on official 4.3, my service signal did shoot up to normal again!). Installed SuperSU.
Now when I try to flash any ROM via TWRP it gives errors such as "Status 7", or error reading MD5 when I try to backup software.
wmzed said:
Was quite a bit of trouble at first . I managed to download and flash the software. flashed TWRP via odin.
Then through TWRP, I rooted by using the Knox remover zip (as i was on official 4.3, my service signal did shoot up to normal again!). Installed SuperSU.
Now when I try to flash any ROM via TWRP it gives errors such as "Status 7", or error reading MD5 when I try to backup software.
Click to expand...
Click to collapse
Make sure twrp is up to date for d2tmo, and make sure the rom you are flashing is 4.3 or later. I'm pretty sure that once you're on the latest 4.3 rom you can't flash anything lower
ratchetrizzo said:
Make sure twrp is up to date for d2tmo, and make sure the rom you are flashing is 4.3 or later. I'm pretty sure that once you're on the latest 4.3 rom you can't flash anything lower
Click to expand...
Click to collapse
Got the latest TWRP running, but still the same issue trying to flash OctOS M, PACROM 5.0.1, etc.
wmzed said:
Got the latest TWRP running, but still the same issue trying to flash OctOS M, PACROM 5.0.1, etc.
Click to expand...
Click to collapse
That's strange, I'm using 3.0.2.0 and the latest 999L baseband and I haven't had any issues with flashing.
I'm Using the MM pac rom but I've tried CM14.1 nightly builds with no problem
ratchetrizzo said:
That's strange, I'm using 3.0.2.0 and the latest 999L baseband and I haven't had any issues with flashing.
I'm Using the MM pac rom but I've tried CM14.1 nightly builds with no problem
Click to expand...
Click to collapse
I have finally managed to figure it out. You need to completely format the entire ROM currently installed from your phone. Once that is done, you can add any ROM to install properly. I'm running well on OctOS-N 3/17/2017 build.
Thanks all for your help.