Develop Bugs

[Q] Bricked Kindle Fire?? HELP!

Okay so basically I decided to root my Kindle Fire. I have rooted my android phone and my iPod before so I wasn't too worried about it, but it's gone horribly wrong and I need major help.
So here's what happened:
I got my root from rootkindlefire.com and followed the necessary steps (i'm running on 6.3.1)
It got halfway through and froze and I stupidly unplugged my kindle
Then it was stuck on this screen with a yellow triangle with a flame in it and at the bottom is said press power button for recovery, but when I pressed it nothing happened
So I went messing around online, in my drivers, etc. I ended up deleting my kindle drivers (like the original ones) and now my kindle is freaking out.
I watched this other tutorial on rootkindlefire.com and tried to follow the steps on how to unbrick it but when I managed to get into the recovery (i can't remember what it's called? blue screen with options like install, mount, reboot, etc.) and put the zip drive he said to, in there... i couldn't see it.
I then downloaded KFU and managed to get my kindle to reboot, but it is now stuck on the "Kindle Fire" screen. I can turn it off, get into recovery, etc. I cannot get it to move past the start up screen however.
I do not believe I am in fastboot, but one of the sites I was on could have misled me. Anyway... HELP! please... I'm sad:/

You should be able to find all you need to get it going here http://forum.xda-developers.com/showthread.php?t=1923010

Thepooch said:
You should be able to find all you need to get it going here http://forum.xda-developers.com/showthread.php?t=1923010
Click to expand...
Click to collapse
I followed all the steps and everything worked just like it said....but when my kindle rebooted, it is still stuck at the kindle fire screen but now there's animation...which it did not have before.
Any suggestions?

If your getting animation and it doesn`t go any further this usually indicates a broken system which TWRP are you using ? If you are using 2.3.1.1 there`s a problem with how it formats best you revert to an older version 2.2.2.1 or older then it should work for you. Full wipe except your external storage/sdcard, refalsh rom and gapps. The proper methods for wiping are also provided in the link I gave you.

Very good point though make sure your using the newest version of KFU 9.6 the older version uses burrito root which no longer works on the Kindle Fire. Really though alll you need is a bootloader and recovery rooting is obsolete.

lexibrowni said:
Okay so basically I decided to root my Kindle Fire....
I got my root from rootkindlefire.com and followed the necessary steps (i'm running on 6.3.1)
I watched this other tutorial on rootkindlefire.com and tried to follow the steps on how to unbrick it but when I managed to get into the recovery (i can't remember what it's called? blue screen with options like install, mount, reboot, etc.) and put the zip drive he said to, in there... i couldn't see it.
I do not believe I am in fastboot, but one of the sites I was on could have misled me. Anyway... HELP! please... I'm sad:/
Click to expand...
Click to collapse
First off, definitely listen to Thepooch and Josepho1997. Next, do you just want a rooted KF running the basic 6.3.1 firmware, or will you be switching to ICS or JB?
Next, is the blue screen you mentioned the TWRP screen? (TeamWin screen with 8 different choices)? If you are, then go to (I think) the bottom right and select mount, then mount system or USB or whatever it says. After that you can add files for a custom ROM or whatever you want through your computer. I forgot to mention that you need to of your KF into your computer.
Sent from my Amazon Kindle Fire using Tapatalk 2

lexibrowni said:
Okay so basically I decided to root my Kindle Fire. I have rooted my android phone and my iPod before so I wasn't too worried about it, but it's gone horribly wrong and I need major help.
So here's what happened:
I got my root from rootkindlefire.com and followed the necessary steps (i'm running on 6.3.1)
It got halfway through and froze and I stupidly unplugged my kindle
Then it was stuck on this screen with a yellow triangle with a flame in it and at the bottom is said press power button for recovery, but when I pressed it nothing happened
So I went messing around online, in my drivers, etc. I ended up deleting my kindle drivers (like the original ones) and now my kindle is freaking out.
I watched this other tutorial on rootkindlefire.com and tried to follow the steps on how to unbrick it but when I managed to get into the recovery (i can't remember what it's called? blue screen with options like install, mount, reboot, etc.) and put the zip drive he said to, in there... i couldn't see it.
I then downloaded KFU and managed to get my kindle to reboot, but it is now stuck on the "Kindle Fire" screen. I can turn it off, get into recovery, etc. I cannot get it to move past the start up screen however.
I do not believe I am in fastboot, but one of the sites I was on could have misled me. Anyway... HELP! please... I'm sad:/
Click to expand...
Click to collapse
Hi I am exactly where you were at (Deleted drivers=Freaking Out at yellow triangle). What do i do from here!? Please Help Me!!???

http://forum.xda-developers.com/showthread.php?t=1923010

Help
I have done everything that has been listed here. My kindle is stuck on the kindle fire screen, I can not boot into recovery and I do believe the TWRP that was previously on it, has been removed as well as the OS...My son was messing with it and all I could get out of him was he was on a blue screen and swiped to reboot and he thought it said no OS installed. So, I have the done the Alternate method for rooting, however, when run the kfu, it says its online but boot status is unknown. I can not get it to say any different. What am I doing wrong?

[Q] Kindle Fire - ABD, Bricked, Stuck at Boot

Hello bricked my Kindle about 5 months ago, and I tried everything I could to unbrick it. I recently started to attempt to unbrick it again and ran into the same problems.
OS - Windows 7 x64
KF - Kindle Fire (I got this around December 2011) (Firmware unknown)
Problem - Kindle Fire is stuck on the screen which says "kindle fire." Nothing else happens.
How did you cause this problem? - I was trying to install Cyanogen Mod, and my friend said he knew how to do it. Obviously he didn't.
Was the recovery installed prior to installing the mod? - No.
Have you installed SDK? - Yes.
Does ADB detect device? - No, I've been searching this forum time and time again for new instructions or new ways to do it. Reading other threads, it seems to be a driver problem. Yes, I've uninstalled it, and reinstalled it. I'm installed the driver the old way (Going to extras/google/usb_driver) then I tried the KFU's exe then I tried Amazon's way. Currently, the device (in Device Manager) is named Android ADB Interface. However, if I disconnect the device and reconnect it, it will give me "Unknown Device" and "Windows has stopped this device because it has reported problems. (Code 43)".
EDIT:I just noticed this is probably in the wrong section. Sorry! If it is, could a MOD move it please?
Additional Information - The Kindle Fire was rooted by me, and I did get ADB working before. Unfortunately, right now I cannot get it working. I believe if I can start ADB, that the KFU should do the trick. Also, if anyone has additional time and is feeling generous, I am more than happy to do Teamviewer to try and solve this problem.
I will continue trying to tackle this on my own. Thank you for your time.
~Cesgore.
My resources.
http://forum.xda-developers.com/showthread.php?t=1887026
https://developer.amazon.com/sdk/fire/connect-adb.html
https://developer.amazon.com/sdk/fire/setup.html
https://developer.amazon.com/sdk/fire/connect-adb.html
http://forum.xda-developers.com/showthread.php?t=1414566
http://forum.xda-developers.com/showthread.php?t=2005989

What CM build were you trying to attempt? what version of KFU did you try? I assume you have TWRP or CWM installed? and finally, is the Kindle Fire logo the regular one or is it blue?
Hopefully the answers that you give me will help, and I hope that I can help you too.

I think I got the same problem, and I'm a big noob.
Kindle Fire is stuck at the blue "Kindle Fire" screen, when I go on either recovery or normal boot it just hangs on "booting".
I did not install TWRP so I'm screwed. Tried adb reboot and some fastboot commands in order to change booting stuff so I can fix it up.
I was trying to install ICS through this guide: techhive.com/article/258452/how_to_install_ice_cream_sandwich_on_your_kindle_fire.html?page=2 (I'm not spamming :[ )
I did thesse steps:
fastboot -i 0x1949 flash recovery C:\kfu\software\openrecovery-twrp-blaze-2.1.1.img
3. Change the boot mode to Recovery:
fastboot -i 0x1949 oem idme bootmode 5001
4. Reboot into TWRP:
fastboot -i 0x1949 reboot
Click to expand...
Click to collapse
Right after I tried to reboot into TWRP it just got stuck into "Booting".
I have no idea what to do now :/
EDIT:
SO for some strange reason, it booted back to the default KF OS.
I unplugged my KF and turned it off, booted my Ubuntu partition, plugged the kindle back in and turned it on... it booted normally.
I'm gonna try and redo all the process, maybe SouKit can help you with this: http://forum.xda-developers.com/showthread.php?t=1850038
Not quite sure if it'll help in your case, but I've seen threads with people solving similar problems with it.

This thread did it for me http://forum.xda-developers.com/showthread.php?t=1750250

I used SoupKit to get the kindle into fastboot, then I installed TWRP through SoupKit.
After that I put in my ICS rom in Kindle's sdcard.
Booted up TWRP and installed ICS...
That's what I did, maybe it can help you out in case the other solutions don't work.

jma9454 said:
What CM build were you trying to attempt? what version of KFU did you try? I assume you have TWRP or CWM installed? and finally, is the Kindle Fire logo the regular one or is it blue?
Hopefully the answers that you give me will help, and I hope that I can help you too.
Click to expand...
Click to collapse
I apologize for the late reply.
What CM build were you trying to attempt?
CM 7
what version of KFU did you try?
KFU 0.9.6
I assume you have TWRP or CWM installed?
As for TWRP/CWM I sadly don't think that was installed.
is the Kindle Fire logo the regular one or is it blue?
Regular Logo
Thank you everyone else, I will follow your links and see if it helps.

Cesgore,
Try going into the KFU and installing TWRP with the kindle attached to the computer and see if it installs. It's okay if KFU doesn't see the device, just try it anyway. This worked for me and I was able to get into recovery. If not try installing FireFireFire the same way with KFU.
Also, is your Kindle showing up in device manager at all?

Ebicoustic said:
Cesgore,
Try going into the KFU and installing TWRP with the kindle attached to the computer and see if it installs. It's okay if KFU doesn't see the device, just try it anyway. This worked for me and I was able to get into recovery. If not try installing FireFireFire the same way with KFU.
Also, is your Kindle showing up in device manager at all?
Click to expand...
Click to collapse
Whoa. Whoa whoa whoa whoa whoa whoa whoa. By some miracle I just connected it and a the drivers decided to recognize it (Usually saids Unknown Device, and when trying to update it, it says it's on the latest version). Did KFU, said it didn't see the device. But TWRP installed and it just booted for the first time in MONTHS! I love you.
Thank you everyone else who help!

[Q] Kindle will only boot to TWRP

I'm rooting a kindle, and some weird things happened while I was rooting it, problems with rooting on Windows 8, But now that I have TWRP and FIREFIREFIRE installed, it won't let me boot to system. It flashes on and off of the shiny kindle Fire screen, then boots to TWRP. KFU says it is in Boot STatus 0x5003. Any help?

Ichigo said:
You're in the recovery boot mode. Change it to normal boot mode using kfu.
a.k.a. Josepho1997
Merry Christmas
Click to expand...
Click to collapse
Hello, sorry to bump an old thread, but when I tried to boot into normal boot mode, it tells me "The system cannot find the file specified." I have been stuck in this TWRP recovery mode for so long. Even when I get into Normal Boot mode, how do I get JellyBean installed so it loads that ROM? I have the Jellybean ROM files on the Kindle, which I can access via TWRP, but don't know how to install. HELP!!!

Well, right now I did a factory reset of the Kindle and I was able to get the KF back to it's defaults. I copied the Jellybean .zip file and gapps Jellybean .zip file to the root of the KF. I booted into Recovery Mode and I was finally able to see both .zip files when I clicked on Install. I thought I could do the Permanent Root now that I did the factory reset, but once I ran it under KFU, it would go through the process to install TWRP and then boot the KF into TWRP, but it doesn't look like it completed the root. How do I complete it?
In the meantime, I had went into Recovery Mode, went to Install and currently loading Jellybean onto the KF. I'm currently stuck at Verifiying partition sizes and it's been sitting there for a few minutes. How long does it take before it's updated to JB?

System Only boots to TWRP and KFU will not see kindle
I have a Kindle Fire 1... Not the HD when I got it in Dec of 2011 I got some help to get TWRP and CM7 Installed on it, and it worked great until a couple of days ago and now there is no help in the kindle fire room anymore so I was wondering if there is someone out there who would be willing to help me to get this to work again either through teamviewer or a Chat of some type, Gtalk, IRC anything at this point to get this to work again.
I have tried everything from a Hard reset, and KFU will not see it and I even tried a unbricking tool and that cannot find it either. Please help me out.
Thanks

CloudStrrife said:
I have a Kindle Fire 1... Not the HD when I got it in Dec of 2011 I got some help to get TWRP and CM7 Installed on it, and it worked great until a couple of days ago and now there is no help in the kindle fire room anymore so I was wondering if there is someone out there who would be willing to help me to get this to work again either through teamviewer or a Chat of some type, Gtalk, IRC anything at this point to get this to work again.
I have tried everything from a Hard reset, and KFU will not see it and I even tried a unbricking tool and that cannot find it either. Please help me out.
Thanks
Click to expand...
Click to collapse
What exactly is going on...spare no detail...
Sent from my Nexus 7 using Tapatalk 2

Stuck booting into TWRP
Hello Forum Lords, I hope that I found the proper thread for my problem.
I was simply trying to install Cyanogemod 9 on my wifes replacement KF1 after the first KF1 suffered some sore of hardware malfunction and would no longer take a charge. Somehow, somewhere I went horribly wrong this time around. I got stuck at the KF1 logo and eventually I got it to boot, but only to recovery.
My predicament is this: My KF1 is stuck booting into TWRP. Device manager on Win Vista recognizes the KF1 as Android Composite ADB Interface. When I try to use the KFU to boot the device into Normal Mode it says "cannot find the drive specified".
At the KFU starting menu, it says ADB Status: Online, Boot Status: 0x5003.
My ultimate goal is to get this thing running Cyanogenmod again. I am painfully noob at all of this. Please speak as you would to an escaped chimp who will not let go of the keyboard and mouse.
Thank you, anybody

[Q] need help with boot loop

Please forgive my noob-ness. I've done some research but i can't figure out whats up with this device.
I have a Kindle Fire first gen that is stuck in a boot loop. I get the boot logo with "Kindle Fire" and a flicker effect but that is it. This is NOT my device i'm trying to fix it for a non-technical family member. I know they didn't try to root it or any of that. It just stopped working for them one day.
after installing / removing / reinstalling the drivers a million times i finally got the kindle fire utility to see the device as online. its seems like no matter what i do the device goes back to the boot loop and KFU gives me "waiting for device'. anyone have any ideas? do i need the factor cable to get this working again??

according to FAQ 16 Frequently Asked Questions - Amazon Kindle Fire
If the Kindle Fire logo you're talking about flashes and goes dim after being brightly lit for a few seconds, then your device is trying to boot normally to a malfunctioning operating system, likely caused by not wiping the data partition (factory reset) before flashing a ROM. If that's the case, you will likely need a factory cable to get into fastboot mode so you can access or (if needed) install custom recovery, then reinstall a ROM properly.
Click to expand...
Click to collapse
yes you need a fastboot cable
or
there is a [UTILITY] Kindle Fire Unbrick Utility V1.1! that you can try

kfs325 said:
Please forgive my noob-ness. I've done some research but i can't figure out whats up with this device.
I have a Kindle Fire first gen that is stuck in a boot loop. I get the boot logo with "Kindle Fire" and a flicker effect but that is it. This is NOT my device i'm trying to fix it for a non-technical family member. I know they didn't try to root it or any of that. It just stopped working for them one day.
after installing / removing / reinstalling the drivers a million times i finally got the kindle fire utility to see the device as online. its seems like no matter what i do the device goes back to the boot loop and KFU gives me "waiting for device'. anyone have any ideas? do i need the factor cable to get this working again??
Click to expand...
Click to collapse
Not sure of the state of your Kindle Fire G1 (It's not rooted? Are you sure?), but this sounds similar to what I ran into trying to install CM11.
What version of TWRP do you have installed? If it's 2.2.2.1 and you're trying to install a ROM with KitKat (CM11) you can run into this. I did. When I installed TWRP 2.7.0.1 I could install CM11 just fine without the boot loop.
To install TWRP 2.7.0.1 I found that you could only do so by:
When you turn Kindle Fire on, hold down the power button to cycle through the options when you see the Kindle Fire logo. You want to land on the Recovery option.
Mount storage from TWRP 2.2.2.1 on a PC and copy CM10.x.x and related GApps to SDCARD
Factory reset then reinstall CM10.x.x (with Gapps for that version)
Install Flashify from the PlayStore
Download the latest TWRP for otter/Kindle Fire G1 (2.7.0.1)
Install it with Flashify
Download CM11 and related ZIPs (GApps kk, Change to Nexus 7, etc) to Downloads directory
Restart into TWRP recovery (should be 2.7.0.1 now), and factory reset/reinstall CM11 and related ZIPs from Downloads directory
Should be fine now.
I found that I could only do it this way because for some reason Kindle Fire Utility Kit and ADB couldn't work with my Kindle anymore with TWRP 2.2.2.1 (don't ask, I don't know why). This way works. Just make sure you have a copy of a version of a ROM and GApps on SDCARD at all times since mounting storage might not work anymore in TWRP (again, I'm not sure why). I tried it again and again, but I couldn't get it to work and it might be the same for you. Keep in mind this is for CM11. If you're using stock, then follow sd_shadow's advice.

[Q] Am I bricked now? -no boot-no recoveryTWRP

I'll try to make this as short as possible. My CM10 Linaro had been crashing a lot lately when browsing pages and I decided to put a more current rom on the KF1 instead of troubleshooting and cleaning it up. I saw that there are now KitKat roms available so I tried to flash a CM11 SGT7 rom and after it would never get past the FFF symbol and just kept rebooting to that. After reading it looked like maybe my TWRP and FFF maybe were too old (TWRP 2.0) so I thought I would just put an older ICS or JB rom back on it and upgrade it later after a full charge. Probably would have been fine if that is what I had done.
Right before flashing an old image I saw a post about a new flashable TWRP, bootloader and recovery for OtterX that I could (I thought) flash using my existing TWRP then I would be able to use the KitKat image I already had on the Kindle.
All of this above may have been bad logic but here is where I am at,
I Installed the newer TWRP,Bootloader from the OtterX KitKat page and on reboot everything looked okay, I got the new bootloader and could double-tap to get into the menus to change file system etc, but when I select "recovery" from the menu it never loads into TWRP recovery. Just keeps booting over and over. I can'r seem to use anything from the KF Utility (reinstall older 2.0 TWRP)because the Kinldle doesn't stay USB connected long enough to run any ADB commands (When it does briefly connect it is seen as an ADB device, but then reboots\disconnects before I can do anything).
SO now, no bootable ROM, Otterx bootloader and apparently no way to get into TWRP or connect as ADB.
If anyone has any suggestions to help get my Dumba$$ out of this I will gladly donate to your cause.

KoBRaQ said:
I'll try to make this as short as possible. My CM10 Linaro had been crashing a lot lately when browsing pages and I decided to put a more current rom on the KF1 instead of troubleshooting and cleaning it up. I saw that there are now KitKat roms available so I tried to flash a CM11 SGT7 rom and after it would never get past the FFF symbol and just kept rebooting to that. After reading it looked like maybe my TWRP and FFF maybe were too old (TWRP 2.0) so I thought I would just put an older ICS or JB rom back on it and upgrade it later after a full charge. Probably would have been fine if that is what I had done.
Right before flashing an old image I saw a post about a new flashable TWRP, bootloader and recovery for OtterX that I could (I thought) flash using my existing TWRP then I would be able to use the KitKat image I already had on the Kindle.
All of this above may have been bad logic but here is where I am at,
I Installed the newer TWRP,Bootloader from the OtterX KitKat page and on reboot everything looked okay, I got the new bootloader and could double-tap to get into the menus to change file system etc, but when I select "recovery" from the menu it never loads into TWRP recovery. Just keeps booting over and over. I can'r seem to use anything from the KF Utility (reinstall older 2.0 TWRP)because the Kinldle doesn't stay USB connected long enough to run any ADB commands (When it does briefly connect it is seen as an ADB device, but then reboots\disconnects before I can do anything).
SO now, no bootable ROM, Otterx bootloader and apparently no way to get into TWRP or connect as ADB.
If anyone has any suggestions to help get my Dumba$$ out of this I will gladly donate to your cause.
Click to expand...
Click to collapse
Did a little more research.Guess I should try a fastboot cable maybe?

connected for a split sec is all KFU needs to send reboot to fastboot mode command.
Did you try rebooting kindle few time while running KFU?

I have the same problem. KF detects as TI Board. No boot or adb. Battery is charged. Also power led is not working. Any advices? Also i try to connect with fastboot cable. Nothing changed. Device manager just for second detects TI Board.

clifford25501 said:
I have the same problem. KF detects as TI Board. No boot or adb. Battery is charged. Also power led is not working. Any advices? Also i try to connect with fastboot cable. Nothing changed. Device manager just for second detects TI Board.
Click to expand...
Click to collapse
which windows version 7, 8...?

I try on win xp and win7. First it was detected as OMAP4320 but after driver installing its detects only as TI BOARD. This happaeds after installing otter x bootloader and tpwr 2.7.0.0. I live it for a night because i couldnt install driver for otterx fastboot. When i check device on the morning it was in this state and do not power on.