Hi all. I'm not a novice when it comes to rooting and flashing but I'm stuck on this one. A friend of mine tried to install CM11 on this phone, the LS980 and somehow really jacked it up. It's stuck in a bootloop, but I can get into download mode and stock recovery. All data has been wiped. I have tried using the LGFlash tool to install the stock tot and dll but it fails. It fails because the the tool says the file is the wrong model for the phone. Here's the thing, its not. But somehow the phone now thinks its a D802 instead of an LS980. (This happened during the CM11 attempt somehow) The flash tool fails every time. I even tried the D802 files and it started to flash but failed about a 1/4 of the way through. That confirms that the phone definitely thinks its a D802, weird. When I hook it up to the LG Support tool, it tells me the phone is a testmodel!
Needless to day I've tried everything I know how. ADB sideloads, different recoveries, and I've researched for hours on end. I have hope that there's still a solution. I would be golden if I could get a recovery on it, either TWRP or CWM. Any help is appreciated.
have the same problem. simply cant recover the recovery.
My recovery for e988 g pro in lg g2. I try everything for fix the recovery but cant help it. Is there any way to re build recovery?
Hey Guys,
First post and i already got a problem because i messed up very much
I used to have Cyanogenmod 11 on my Optimus G, but i got several crashes and i wasnt completely fine with it so i wanted to try something new. So i updated my bootloader from CWM to TWRP and wanted to flash Artmod 5.2 Rom. I was a bit fast with my wiping, so i accidentally wiped the whole phone, so that everything was gone: Cyanogenmod, new Artmod rom i wanted to flash just everything.
I read a bit and thought it shouldnt be a problem then to just sideload the new rom, which i tried to do. I used adb sideload to put Artmod on the phone, everything was fine, flashing went through but i got stuck at the LG boot logo at the start of the phone. I waited like 30 minutes and nothing did change, so i thought something was not right.
I then just wanted to go back to cyanogenmod, tried to flash that through the adb sideload procedure but i got an error which said "error executing updater binary in zip 'tmp/sideload.zip'".
I was kinda thinking something really messed up so i tried to revert the phone to stock rom with the correct KDZ file i searched with the tool linked in the FAQ, everything downloaded but when i tried to flash the KDZ it gave me an error like this:
"12:03:59 Launching SW update
12:03:59 Unpacking KDZ
12:05:10 KDZ file extracted
12:05:11 Extract file error
12:05:13
===FINISH===="
So i searched the forums again and noticed that it should be a problem with the KDZ updater tool because the KDZ file was too big to get flashed properly. I wanted to try the LG Flash Tool 2014 then which is provided here in the forums and should work, it extracted the KDZ file, then opened the LG Mobile Support Tool to flash the file on the phone but there i start to get errors again, it either said that i am already on the correct up to date software version or that i need to disconnect the USB cable, remove the battery, insert it again, restart and try again.
I used several tools for that, i even tried it with an offline method that i found in a german forum, but every method got me the same errors, so i couldn't even go back to stock anymore.
I once tried to flash Cyanogenmod then again when i realized that the error message also told me "This Rom is for a "E975", this is a "GEE"" which i did not completely understand because it should be the total same? I edited the Updater-Script in the Zip file of the rom then and removed the part where it checks for that (1st line actually), then the rom did flash properly, phone started to boot (Cyanogenmod Boot Logo was shown) but when the boot was over i got the message:
"Type Password to Decrypt Storage" with a keyboard to enter the password. (I did never set up any password for that).
Now i am completely confused what i can do the recover my phone, either to stock or just to another rom, every method i tried did not work and i dont have any other ideas.
I can go into Fastboot, Recovery and Downloadmode, but when i tried to wipe again in Recovery it says that it cant mount my data mount point (probably because the storage is encrypted).
Somebody told me to do a hard reset with the keys "Volume down and power" which i tired several times, but everything i get is just the Google boot logo and then happens nothing or i get the Google logo, then the LG logo but after that i get stuck again, I cant seem to go into the "Hard Reset" menu which i should get into with that keys.
Anybody can help me what I could try or got a solution for this? I would be very thankful. I don't wanna loose my phone
Astarooth said:
First post and i already got a problem because i messed up very much
Click to expand...
Click to collapse
Don't worry, that's pretty standard scenario for the first post...
I wanted to try the LG Flash Tool 2014 then which is provided here in the forums and should work, it extracted the KDZ file, then opened the LG Mobile Support Tool to flash the file on the phone but there i start to get errors again, it either said that i am already on the correct up to date software version or that i need to disconnect the USB cable, remove the battery, insert it again, restart and try again.
Click to expand...
Click to collapse
Flash Tool 2014 works great for me every time, so try it again. Make sure you disconnect from the Internet before running it (yank out your LAN cable, or disable your WiFi), so it doesn't attempt to connect to LG servers. And don't forget to put your KDZ file in the same directory with the tool. It should go through just fine. That's by far the easiest method to revert back to stock, to get you to a clean starting point.
"This Rom is for a "E975", this is a "GEE"" which i did not completely understand because it should be the total same?
Click to expand...
Click to collapse
Umm... No, they are not the same. E975 is "geehrc", and there is no such OEM ID as "gee". There are many different OG variants. For the cross-reference between the models and OEM IDs, you can look here. Generally, you should stick to the ROMs that are designed for your model, unless you know exactly what you are doing, when trying to flash a ROM from a different platform.
kt-Froggy said:
Don't worry, that's pretty standard scenario for the first post...
Flash Tool 2014 works great for me every time, so try it again. Make sure you disconnect from the Internet before running it (yank out your LAN cable, or disable your WiFi), so it doesn't attempt to connect to LG servers. And don't forget to put your KDZ file in the same directory with the tool. It should go through just fine. That's by far the easiest method to revert back to stock, to get you to a clean starting point.
Umm... No, they are not the same. E975 is "geehrc", and there is no such OEM ID as "gee". There are many different OG variants. For the cross-reference between the models and OEM IDs, you can look here. Generally, you should stick to the ROMs that are designed for your model, unless you know exactly what you are doing, when trying to flash a ROM from a different platform.
Click to expand...
Click to collapse
Well i tried Flash Tool 2014 again and seem to get the same error that wants me to disconnects as it stops at the same position like it always did, also doesn't matter if I am connected to the internet or not, everytime it doesn't run through. This time I couldn't even read the stuff that was written in the LG Mobile Support tool because it only shows "????".
Heres a Screenshot:
The settings i made should be the right ones I think, the phone does get recognized by the computer when i plug it in because of the sound that windows makes.
I clearly dont't know what I can try anymore...
And according to the roms: well i only used roms for the E975, which is exactly my phone model, thats why i was wondering about that error message i got
Artmod is for E975, the CM11 was for E975, i even tried Mokee rom but i always got same error messages...
Nobody got another idea? I really am confused because if i can enter downloadmode and recovery there should be a way to get my phone back working.
Anybody knows where i can get maybe some older KDZ Files to go to 4.1.2 Stock rom and try to flash these?
problem
Astarooth said:
Nobody got another idea? I really am confused because if i can enter downloadmode and recovery there should be a way to get my phone back working.
Anybody knows where i can get maybe some older KDZ Files to go to 4.1.2 Stock rom and try to flash these?
Click to expand...
Click to collapse
Contact me on [email protected] and ill help u over teamwiewer.
Astarooth said:
Well i tried Flash Tool 2014 again and seem to get the same error that wants me to disconnects as it stops at the same position like it always did, also doesn't matter if I am connected to the internet or not, everytime it doesn't run through. This time I couldn't even read the stuff that was written in the LG Mobile Support tool because it only shows "????".
Heres a Screenshot:
The settings i made should be the right ones I think, the phone does get recognized by the computer when i plug it in because of the sound that windows makes.
I clearly dont't know what I can try anymore...
Click to expand...
Click to collapse
I don't know why you are seeing "???", but here is a couple of things regarding the settings, based on your screenshot:
1. Type should be CDMA (yours is 3GQCT).
2. PhoneMode should be DIAG (yours is CS_EMERGENCY).
3. I would suggest using CSE Flash for a full format (you are using Normal Flash).
Remember, this is a hacked tool, so the settings might not make perfect sense, comparing to the original ones. Just try following the instructions in the OP of the Flash Tool 2014 thread. Like I said, works every time for me...
kt-Froggy said:
I don't know why you are seeing "???", but here is a couple of things regarding the settings, based on your screenshot:
1. Type should be CDMA (yours is 3GQCT).
2. PhoneMode should be DIAG (yours is CS_EMERGENCY).
3. I would suggest using CSE Flash for a full format (you are using Normal Flash).
Remember, this is a hacked tool, so the settings might not make perfect sense, comparing to the original ones. Just try following the instructions in the OP of the Flash Tool 2014 thread. Like I said, works every time for me...
Click to expand...
Click to collapse
I don't know why i see "???" also, but it didn't matter
I just tried the settings you told and used CSE Flash which worked out really well.
No i am back to 4.4.2 LG Stock rom. I think the root is gone now, but one thing i wanna ask is if my bootloader is still unlocked and custom recovery is still on it?
Anyway, thank you so so much! I appreciate your help! Thank you!
Astarooth said:
I don't know why i see "???" also, but it didn't matter
I just tried the settings you told and used CSE Flash which worked out really well.
No i am back to 4.4.2 LG Stock rom. I think the root is gone now, but one thing i wanna ask is if my bootloader is still unlocked and custom recovery is still on it?
Click to expand...
Click to collapse
Glad to hear you are back in business. After flashing KDZ, the root is definitely gone, your BL is locked, and the recovery is stock. You will need to do all the necessary steps again: root, unlock the BL and flash custom recovery.
Please don't refer me to any more threads or forums........
I'm sure this has been done and done and talked about but I've been reading the **** out of forums and comments for a few hours now and trying to unroot my Sprint LG G2.
I had it running stock like a champ. rooted it. worked great. then I was attempting to flash lollipop and it required a recovery update (No Problem) I downloaded the correct files and bam! it says your phone is not rooted this requires a root (or something like that) I was already rooted SuperSU installed and root checker said I was fine. so what the hell I swipe to root while inside recovery and it goes to some black screen with tiny text saying fastboot: processing commands and won't leave the screen. I tried booting into recovery and same thing happens. Tried to reboot normal and I'm stuck on the LG logo with my led flashing between blue and green slowly. I CAN boot into download mode and I'm following this
http://pastebin.com/WTm1xFXz
and this
http://forum.xda-developers.com/showthread.php?t=2687929
to unbrick but having this error "Failed PreviousLoad()
Did I not get the right .dll file? I doubt it cause I only saw one...or is it the wrong .tot file? there was 3 or so
http://downloads.codefi.re/autoprime/LG/LG_G2/LS980/Stock_Firmware
Please help!
When i'm in download mode the phone does say I am rooted. is there a way to just re-flash recovery and restore from my backups I did before all this? if I have to wipe this thing clean and start over I don't really mind I just need to get my phone back haha this is the first time this has ever happened to me and I consider myself tech savvy so idk what I did here (except re rooting in recovery like an idiot) thanks so much!
First question, is the download mode you see with a small status bar or the big one?
If you have the big one, download mode should work. The f flash software will verify the tot file. If that goes through you should be golden.
When it asked you in TWRP to root, that is a message telling you system or ROM file did not take.
If you want cm12, use zv8 tot. Root, auto-rec, update TWRP with blastgator bumped TWRP 2.5.1. Flash cm ROM or aosp, then gapps. And go
Hi, hoping someone out there can point me in the right direction!
I purchased a second hand G3 LS990 running ZV4. Since I do not like running an old OS I decided to flash it to ZV8 and had some issues with the modem so proceeded to use TWRP to install PrimeGSM which worked fine..
A day later I thought I'd attempt ZV8 again with a different modem, when starting the TOT flash method I found on this site I noticed that the phone was being detected as a D855 so tried various DLL files and kept running into the CrossDL issue so made the mistake of trying to flash to a D855 rom, three Roms later I had a brick!
The phone currently freezes at the LG Logo, although I am able to get to fastboot, TWRP via fastboot, and Adb via Cyanogenmod recovery.
Fastboot is unable to erase or format partitions, also cannot flash and fails with write failure.
Adb cannot push files and fails with error closed.
All attempts to use fastboot update "rom.zip" fail due to the hardware version so I tried to merge a d855 and ls990 CM build which fails with either a baseband or signature mismatch..
I have been reading up and trying all sorts at this point with no progress in the last day so thought I might try a post before telling the wife I need a new phone!
Any assistance would be greatly appreciated. Let me know if more information is needed.
PS. I know there allot of these threads out there but after digging through the first couple Google pages of each search I have not found one solution which works for my phone.
I managed to get the phone running again by following a guide I found in the forums
Havent read the guide but also happened to me to fix it i was lucky enough to have access to the os and to dl mode but not recovery and i too had different firmware on my phone so i changed the build prop to a ls990. Unaltered build prop, changed permissions accordingly and powered it off. Plugged up to lg flashtool and used the original ls990 dll with zva tot and bam got it flashed no problems.
Sent from my LG-Ls990 using XDA-Developers mobile app
What I've done:
1. Tried LGNPST method but phone never showed up in the software
2. Tried flashing with LG official tool. That always resulted phone disconnected.[I did put my phone into download mode]
3.Tried almost all KDZ_FW_UPDATE methods they always stopped either in not responding-> close program OR extraction error
4. Tried sideloading using adb but they also resulted in "bad file" even push didn't work saying no permission to write(I think)
for adb I tried converted .zip of kdz using some guide in xda.
My phone is totally clean now. I can boot to Recovery or Download Mode. There's no file that's flashable right now. I'm in Philz touch recovery
This actually happened while I was flashing to unlock bootloader and charge went low.
I desperately want it to function properly. Please anyone with any new or updated methods, help me.
When normally trying to boot up, Google logo comes and phone switches off.
I was in F180L converted to E975.
I've INDIAN(20a) version kdz also european(10h) and korean(30e).