Hello,
I am currently using a galaxy S3 i747m which is rooted and unlocked running 4.1.1. I believe I used this guide (http://forum.xda-developers.com/showthread.php?t=1739426) in order to do the root.
I want to update my phone to 4.3 while retaining the root (or rerooting afterwards). I've done plenty of research and haven't found a solid guide to help me. Most seem to assume I would be on 4.1.2 or already on a stock 4.3. I don't have a solid amount of confidence with these tasks so I'm too scared to just try and flash a 4.3 ROM without a confirmation that it will work. Kies tells me in can update the phone but I am also worried about that.
What is the best course of action for me? I wouldn't be writing here unless I had already done my research and was still unsure.
Also a side question, I'm not sure how the phone was unlocked (software or code), if it was unlocked via software, will I lose this by updating to 4.3?
Thanks for the help!
The easiest way to upgrade would be to use Odin to flash a pre-rooted ROM. However, you will lose your data and apps.
audit13 said:
The easiest way to upgrade would be to use Odin to flash a pre-rooted ROM. However, you will lose your data and apps.
Click to expand...
Click to collapse
Thank you for the response! Do you know where I can get a good pre-rooted ROM? Would the 4.3 one in my previous link work? Would the Kies backup be sufficient in restoring my data? Or would I need to use something like Titanium Backup?
Thanks again for all the help!
Upgrading will not re-lock the phone.
You can use one of the pre-rooted 4.3 ROMs you linked. Personally, I stayed away from 4.3 as it will introduce Knox which may cause problems in the future.
I haven't used Kies for anything so I'm not sure how good it will work. Also, it's possible your apps may not work when restored under 4.3.
audit13 said:
Upgrading will not re-lock the phone.
You can use one of the pre-rooted 4.3 ROMs you linked. Personally, I stayed away from 4.3 as it will introduce Knox which may cause problems in the future.
I haven't used Kies for anything so I'm not sure how good it will work. Also, it's possible your apps may not work when restored under 4.3.
Click to expand...
Click to collapse
Thanks again for all the help. I went ahead with the update and it actually went better than expected. All my data was preserved including apps, media, settings etc. Its just now at 4.3 and rooted!
Cheers!
Related
Hello. I have seen a several different ways to go about un-rooting and ways to get the OTA. My question is, what is the best way to un-root and get 2.3.6? I am already rooted using bombaradier 3.5. I don't mean to make another thread about this again, but I am getting confused with all of the different postings and ways to go about this process. If someone could provide links to the most updated way to un-root and get 2.3.6, It would be a great birthday present for me. lol.
PS. I did get the OTA, but I froze it using Titanium. If that matters...
Thanks a Lot
Cleanest way is just to back up your apps with titanium backup, flash the stock rom, update, re-root, reinstall titanium and apps.
Or, just flash a new rom with update pre-installed and de-bloated.
allted said:
Cleanest way is just to back up your apps with titanium backup, flash the stock rom, update, re-root, reinstall titanium and apps.
Or, just flash a new rom with update pre-installed and de-bloated.
Click to expand...
Click to collapse
I know of several users (including me) who just updated using Kies (and then rooted again via Odin). This is a no-wipe solution that requires re-root but old apps and data are preserved
My is rooted when i received the OTA update for 2.3.6. I did not unroot and let the update do their thing. After few minutes my SGS2 is 2.3.6 with working wifi calling. Note: Once you update you need to use the sim that came with the phone in order for wifi to work. Hope this helps.
dave2metz said:
Hello. I have seen a several different ways to go about un-rooting and ways to get the OTA. My question is, what is the best way to un-root and get 2.3.6? I am already rooted using bombaradier 3.5. I don't mean to make another thread about this again, but I am getting confused with all of the different postings and ways to go about this process. If someone could provide links to the most updated way to un-root and get 2.3.6, It would be a great birthday present for me. lol.
PS. I did get the OTA, but I froze it using Titanium. If that matters...
Thanks a Lot
Click to expand...
Click to collapse
dave2metz said:
Hello. I have seen a several different ways to go about un-rooting and ways to get the OTA. My question is, what is the best way to un-root and get 2.3.6? I am already rooted using bombaradier 3.5. I don't mean to make another thread about this again, but I am getting confused with all of the different postings and ways to go about this process. If someone could provide links to the most updated way to un-root and get 2.3.6, It would be a great birthday present for me. lol.
PS. I did get the OTA, but I froze it using Titanium. If that matters...
Thanks a Lot
Click to expand...
Click to collapse
Ummm, if you are using a custom ROM , trying to get the OTA could be very dangerous ... Better bet is just find an updated custom ROM and flash it ...
If you are going to go to stock, make sure you use Odin and not a "stock" rom. I was on Bombardier 3.5 and flashed Zedomax's stock rom with CWM, except the Synergy kernel stuck which caused a few problems. Then, I just flashed the 2.3.6 tar.md5 with Odin. Now everything is fine and I'm looking for a new ROM to flash.
DinkinFlicka said:
If you are going to go to stock, make sure you use Odin and not a "stock" rom. I was on Bombardier 3.5 and flashed Zedomax's stock rom with CWM, except the Synergy kernel stuck which caused a few problems. Then, I just flashed the 2.3.6 tar.md5 with Odin. Now everything is fine and I'm looking for a new ROM to flash.
Click to expand...
Click to collapse
where can i get the 2.3.6... this happened to me also. and is there a video how to flash with odin..
need help asap
thanks
theres a you tube app thay someone made..its flashable too...im not cpu to send it..type unroot tmobile galaxy s2.....i hope it helps
Sent from my SGH-T989 using XDA App
I'm running a rooted stock I317M with nothing modified except for root. I used mrRobinson's thread h t t p :/ / forum.xda-developers.com/showthread.php?t=2004650 as a guide which worked perfectly to keep everything stock (and thus avoid tripping the flash counter) but gave me root. This morning the Canadian carriers began rolling out the 4.1.2 update OTA which failed a few times on my device so I used (GASP!) Kies to do the update. Not sure if it would have mattered OTA or Kies but I have now lost root. Has anyone managed to inject root into a stock image for the I317m yet? It looks like I could go with a custom AT&T I317 build or ADB in and manually install a custom recovery, root etc. but if possible I'm hoping to keep normal device status and not trip the flash counter.
Are you planning on turning your phone in for warranty anytime soon or do you just like the look of "Official" instead of "Modified" on your About Phone settings?
Exact same thing happened for mine, stock rooted Canadian OTA to 4.1.2 failed repeatedly, Had to use Kies as well and lost root. The main reason I wanted root was to switch off fast dormancy since my Canadian carrier doesn't support it and was killing battery. Good news is it stayed switched off.
[email protected] said:
Are you planning on turning your phone in for warranty anytime soon or do you just like the look of "Official" instead of "Modified" on your About Phone settings?
Click to expand...
Click to collapse
Not really. Originally it was just to make sure I'd get the update without issue when it was released. My understanding is that I can always reflash with the stock firmware I have from Sammobile and it will reset the flash counter + set the status back to normal if the need arose but also thought it easier to just unroot, reboot and uninstall SU if possible.
chris19000 said:
Not really. Originally it was just to make sure I'd get the update without issue when it was released. My understanding is that I can always reflash with the stock firmware I have from Sammobile and it will reset the flash counter + set the status back to normal if the need arose but also thought it easier to just unroot, reboot and uninstall SU if possible.
Click to expand...
Click to collapse
Cool.... Honestly, I never worry about tripping the counter unless I need to turn in for replacement/warranty repair. Apparently, this seems to work just fine: http://forum.xda-developers.com/showthread.php?t=2073141&highlight=lost+root
m4runner said:
Exact same thing happened for mine, stock rooted Canadian OTA to 4.1.2 failed repeatedly, Had to use Kies as well and lost root. The main reason I wanted root was to switch off fast dormancy since my Canadian carrier doesn't support it and was killing battery. Good news is it stayed switched off.
Click to expand...
Click to collapse
First time I've actually heard of fast dormancy. My battery life has actually been pretty good and that with fairly varied, heavy use. Have to look more into it. I rooted primarily for backing up (TB), remote file sharing and just plain messing around.
[email protected] said:
Cool.... Honestly, I never worry about tripping the counter unless I need to turn in for replacement/warranty repair. Apparently, this seems to work just fine: http://forum.xda-developers.com/showthread.php?t=2073141&highlight=lost+root
Click to expand...
Click to collapse
Thanks R1K, I looked at that earlier and still might try it after a little more in depth reading if nothing else presents itself. I use the camera fairly extensively and although it looks like the camera is only affected when patching the exploit I have to be a little cautious since I use it for work. Plus the easy unroot/stock return part :good:
m4runner said:
Exact same thing happened for mine, stock rooted Canadian OTA to 4.1.2 failed repeatedly, Had to use Kies as well and lost root. The main reason I wanted root was to switch off fast dormancy since my Canadian carrier doesn't support it and was killing battery. Good news is it stayed switched off.
Click to expand...
Click to collapse
One option which is what I did, was to download the 4.1.2 update from sammobile.
I then used mobile odin to flash it which has the ability to protect root.
So now I am stock rooted on latest firmware device status is normal
---------- Post added at 04:54 PM ---------- Previous post was at 04:42 PM ----------
[email protected] said:
Cool.... Honestly, I never worry about tripping the counter unless I need to turn in for replacement/warranty repair. Apparently, this seems to work just fine: http://forum.xda-developers.com/showthread.php?t=2073141&highlight=lost+root
Click to expand...
Click to collapse
Doubt this will work.
The whole way this gained root was via the exynos exploit.
This firmware I am pretty sure has patched it.
Exynos abuse says no but voodoo app says yes.
I can confirm the exploit is patched in this new firmware so I suspect this will close any holes used by exynos abuse app to root phone.
Canadoc said:
One option which is what I did, was to download the 4.1.2 update from sammobile.
I then used mobile odin to flash it which has the ability to protect root.
So now I am stock rooted on latest firmware device status is normal
---------- Post added at 04:54 PM ---------- Previous post was at 04:42 PM ----------
Doubt this will work.
The whole way this gained root was via the exynos exploit.
This firmware I am pretty sure has patched it.
Exynos abuse says no but voodoo app says yes.
I can confirm the exploit is patched in this new firmware so I suspect this will close any holes used by exynos abuse app to root phone.
Click to expand...
Click to collapse
Thank you Canadoc. Might be the best bet for me too. I did a TB backup just prior to the update so maybe I'll flash back to 4.1.1 with the root injected ROM in odin and then flash the 4.1.2 update from sammobile from mobile odin. Otherwise looks like it might be a custom i317 build for me. CWM sure sounds nice right now
For those trying to get multiveiw update and are rooted.... it is much much easier ti go get the firmware from sammobile.com then flash it with mobile odin with the ever root option.. all done :thumbup:
Sent from my SGH-I317 using xda premium
twanskys204 said:
For those trying to get multiveiw update and are rooted.... it is much much easier ti go get the firmware from sammobile.com then flash it with mobile odin with the ever root option.. all done :thumbup:
Sent from my SGH-I317 using xda premium
Click to expand...
Click to collapse
That's for sure. I'm going to go back to root injected stock 4.1.1 and start from scratch.
chris19000 said:
That's for sure. I'm going to go back to root injected stock 4.1.1 and start from scratch.
Click to expand...
Click to collapse
Worked as planned... more or less. Had to do a factory reset and flash twice to get 4.1.1 to boot but from there installed mobile odin, extracted and flashed from 4.1.2 (from sammobile and copied to external SD) and good to go. Now, if you want to go stock with root and for whatever reason don't want to/can't use mobile odin, head over to this thread http://forum.xda-developers.com/showthread.php?t=2004650&page=26 mrRobinson is working on injecting root into the stock builds.
Cheers.
Which is the better way ?
chris19000 said:
Worked as planned... more or less. Had to do a factory reset and flash twice to get 4.1.1 to boot but from there installed mobile odin, extracted and flashed from 4.1.2 (from sammobile and copied to external SD) and good to go. Now, if you want to go stock with root and for whatever reason don't want to/can't use mobile odin, head over to this thread http://forum.xda-developers.com/showthread.php?t=2004650&page=26 mrRobinson is working on injecting root into the stock builds.
Cheers.
Click to expand...
Click to collapse
I use the Mr. Robinsons thread to stock my device to 4.1.1 but when i did . it always stuck on the Samsung logo after rebooting.
so i have to put my phone in recovery mode and factory restore.
this wasy right now i have root on 4.1.1 .
but i wanna know the best way to update my phone to 4.1.2
becasue i know .. with OTA i will loose my root.
please help.
prashant19p said:
I use the Mr. Robinsons thread to stock my device to 4.1.1 but when i did . it always stuck on the Samsung logo after rebooting.
so i have to put my phone in recovery mode and factory restore.
this wasy right now i have root on 4.1.1 .
but i wanna know the best way to update my phone to 4.1.2
becasue i know .. with OTA i will loose my root.
please help.
Click to expand...
Click to collapse
Hi prashant there are a number of ways you can update OTA without losing root but of the easy ones I can only speak personally about one of them - Mobile Odin - which is what I used. It's a paid app but it gives you the option for EverRoot which maintains root across roms and automatically installs itself and SU in the new rom. Hate to ask, but are you sure you flashed the right rom? He has it listed as the new! Bell rom under January. If you flash that with his directions it should work - that being said though I did have to flash it twice myself to get it to work. One flash with odin, stuck on logo, back to regular recovery, wipe cache, download mode and reflash with odin, worked that time around. By that time I had mobile odin and flashed the regular update without root that way but mobile odin kept my root.
If you're looking to retain or regain root after ota, this is the easiest way imo. Just answered it in this thread.
http://forum.xda-developers.com/showthread.php?t=2156741
Froid said:
If you're looking to retain or regain root after ota, this is the easiest way imo. Just answered it in this thread.
http://forum.xda-developers.com/showthread.php?t=2156741
Click to expand...
Click to collapse
Thanks Froid. SuperSU seemed to work for some folks too if they dropped the dime for the PRO version. I did see some instances where neither worked too though, but not enough details to say why.
all you need to do is just reflash with odin rooted 4.1.1 stock rom then once that is done goto play store and get voodoo ota rootkeeper make backup then temp unroot then get the ota 4.1.2 update when finished goto to ota rootkeeper and restore root works just fine and u keep root.
Hello all, I'm new to this forum and I could really use some help with my phone. I have a rooted AT&T Samsung galaxy S3 running on 4.1.1 stock with cwm. I would like to update to the latest stock OS which is 4.3 but I'm not sure how to do it right. I would prefer to keep all my data but I don't mind losing root. how should I go about updating my device safely?
floatingtrees said:
Hello all, I'm new to this forum and I could really use some help with my phone. I have a rooted AT&T Samsung galaxy S3 running on 4.1.1 stock with cwm. I would like to update to the latest stock OS which is 4.3 but I'm not sure how to do it right. I would prefer to keep all my data but I don't mind losing root. how should I go about updating my device safely?
Click to expand...
Click to collapse
If you are rooted then you can flash any 4.3 ROM in the android development and they all have KNOX free bases. You will most likely need to update your baseband to MJB. Enjoy your KNOX free 4.3!!!
floatingtrees said:
Hello all, I'm new to this forum and I could really use some help with my phone. I have a rooted AT&T Samsung galaxy S3 running on 4.1.1 stock with cwm. I would like to update to the latest stock OS which is 4.3 but I'm not sure how to do it right. I would prefer to keep all my data but I don't mind losing root. how should I go about updating my device safely?
Click to expand...
Click to collapse
You should first check to see if you can get an OTA update. Some users have reported being able to update OTA to 4.3 even with root. Go to Settings => About Device and check for updates. If you can't get an OTA update, you may try manually updating via cwm via the method posted in the following thread: http://forum.xda-developers.com/showthread.php?t=2658486
Before updating to 4.3, however, I would suggest you ensure you are done with taking advantage of all the opportunities you have at 4.1.1 including free unlock as you would not be able to downgrade the 4.3 bootloader once you've upgraded. If you don't have Samsung Kies installed on your PC, you may install it to back up and restore your data. In other words, you cannot go back to an older version (easily) once you have upgraded.
New to this phone and I am running 4.1.2 there is a system update a 4.3 that's already downloaded and ready to install but I wanted to make sure the update didn't install any new locks on my phone before I accept. I plan on rooting soon.
Thanks
Rich
U get knox but there are ways to still root with knox so go ahead update
High Definition Note II
Uuum hold on. If you plan to root your phone there is no point in allowing the OTA which does install KNOX. Root now and save that extra trouble.
tx_dbs_tx said:
Uuum hold on. If you plan to root your phone there is no point in allowing the OTA which does install KNOX. Root now and save that extra trouble.
Click to expand...
Click to collapse
If the poster wants to install 4.3, then accept the update, root, then flash your 4.3 rom.. This way you won't have all those reboot, lock up issues, that people keep on having.. Plus most devs do not have knox filex in their roms.. And you won't have to flash the wifi fix..
I Would Accept It.
doubledragon5 said:
If the poster wants to install 4.3, then accept the update, root, then flash your 4.3 rom.. This way you won't have all those reboot, lock up issues, that people keep on having.. Plus most devs do not have knox filex in their roms.. And you won't have to flash the wifi fix..
Click to expand...
Click to collapse
If I was in this position, I would accept the update as doubledragon5 said and move forward with root, etc. I have 4.1.2 right now and want the 4.3 update, but I'm rooted and trying to figure out how to unravel this to get to 4.3 myself.
flashred said:
If I was in this position, I would accept the update as doubledragon5 said and move forward with root, etc. I have 4.1.2 right now and want the 4.3 update, but I'm rooted and trying to figure out how to unravel this to get to 4.3 myself.
Click to expand...
Click to collapse
If your rooted, go back to bone stock MC2 like I have mentioned in a few other threads. accept the 4.3 udate from sprint, re-root using the tookit, then flash away...
doubledragon5 said:
If the poster wants to install 4.3, then accept the update, root, then flash your 4.3 rom.. This way you won't have all those reboot, lock up issues, that people keep on having.. Plus most devs do not have knox filex in their roms.. And you won't have to flash the wifi fix..
Click to expand...
Click to collapse
doubledragon5 said:
If your rooted, go back to bone stock MC2 like I have mentioned in a few other threads. accept the 4.3 udate from sprint, re-root using the tookit, then flash away...
Click to expand...
Click to collapse
Thank you! You're the first to shed some light on this for me. To get back to stock using the toolkit, would I need to first flash stock recovery, then Stock Firmware, then bone stock MC2? Afterwards boot in, accept the update, then re-root using the toolkit.
flashred said:
Thank you! You're the first to shed some light on this for me. To get back to stock using the toolkit, would I need to first flash stock recovery, then Stock Firmware, then bone stock MC2? Afterwards boot in, accept the update, then re-root using the toolkit.
Click to expand...
Click to collapse
I'm wondering the same thing. But if we root then accept the OTA won't that enable the knox counter? So that if we now, "flash away".... won't every flash be counted?
Shouldn't we root, then install the custom roms without the knox? Or do the custom roms also include the knox counter tripping mechanism?
I would like to know how this works also.
Thanks.
I just recently came from 4.1.2 rooted running a deoxided stock rom. I didn't do the OTA update to 4.3. I used the TeamRejects Deoxidexed rooted deknoxed stock rom, the updated MK4 modem, and the WiFi fix. It took about 15-20 minutes to get everything done. I needed to download Odin too for WiFi fix. I didn't run the WiFi fix till I knew there was an issue.
Not much of complaint, but I wish there was a kernel like Perseus for TouchWix based roms. The only one I found was Devil Kernel, but for whatever reason, wasn't stable with TeamReject's ROM. I didn't really care for his custom Kernel ajdustment manager and STweaks didn't work with it at all. Ideally, I prefer a stock rooted deknoxed deoxidized bare bones rom (just phone, contacts, google play) so I have a working phone and can access Google Play so I can install the apps I prefer. The closest I found was Classic Rom but it freezes on initial rom load; Plus, I'm not a fan of the colors and the few things he choose to include.
Stock 4.3 Deodexed, deknoxed, Rooted Rom Available?
lovekeiiy said:
I just recently came from 4.1.2 rooted running a deoxided stock rom. I didn't do the OTA update to 4.3. I used the TeamRejects Deoxidexed rooted deknoxed stock rom, the updated MK4 modem, and the WiFi fix. It took about 15-20 minutes to get everything done. I needed to download Odin too for WiFi fix. I didn't run the WiFi fix till I knew there was an issue.
Not much of complaint, but I wish there was a kernel like Perseus for TouchWix based roms. The only one I found was Devil Kernel, but for whatever reason, wasn't stable with TeamReject's ROM. I didn't really care for his custom Kernel ajdustment manager and STweaks didn't work with it at all. Ideally, I prefer a stock rooted deknoxed deoxidized bare bones rom (just phone, contacts, google play) so I have a working phone and can access Google Play so I can install the apps I prefer. The closest I found was Classic Rom but it freezes on initial rom load; Plus, I'm not a fan of the colors and the few things he choose to include.
Click to expand...
Click to collapse
So, you came exactly where I did except you with a different ROM. I would like to get from my 4.1.2 rooted up to 4.3 rooted stock,deodexed, deknoxed if at all possible.
flashred said:
Thank you! You're the first to shed some light on this for me. To get back to stock using the toolkit, would I need to first flash stock recovery, then Stock Firmware, then bone stock MC2? Afterwards boot in, accept the update, then re-root using the toolkit.
Click to expand...
Click to collapse
Sorry for not getting back sooner. I have been busy with work, and family things.Use billards return to full stock with counter reset. It installs everything including recovery, boot loader,firemware etc... Then set up your phone, when prompt accept the ota update.. Once done retoot, and flash what ever 4.3 rom you want.. The knox counter will still be there, but if you need a trip back to Sprint, go back to Full MC2 stock, knox counter will no longer be there.. Most 4.3 room do not include the Knox files so no worries there.
flashred said:
So, you came exactly where I did except you with a different ROM. I would like to get from my 4.1.2 rooted up to 4.3 rooted stock,deodexed, deknoxed if at all possible.
Click to expand...
Click to collapse
Sounds like it. The odd part, I have been able to flash Reject's stock deoxidezed deknoxed rom with no problem. I tried to flash Classic 3, but it froze on Classic's initial loading page (the one after the Samsung boot loader). I had issues another rom, but turned out it was for the international model; I wasn't paying attention where I was in the forums.
If you do what I did, you'll need to flash modem update using Odin on the PC. So, you may need to download Odin.
---------- Post added at 05:04 AM ---------- Previous post was at 04:56 AM ----------
Depending on what you like to do, you may find 4.3 MK4 more limiting, espcially on the TouchWiz side. AOSP probably more mod friendly at this point. From what I've been able to find, there is only one custom kernal for 4.3 TouchWiz which is Devil's Kernal. It's solid, but my phone was unstable. Not sure if the phone since I may have taken out something it used when I was trying to debloat the phone. Didn't care for his Kernel Tweak manager. Neither the stock or devil's kernal supports Stweaks. Neither I could figure out how to change the boat loading animation.
I have nothing against AOSP projects. I like them. But as far as I know, none support the Spen, which I like to use with web browsers. Don't use the Samnsung Spen apps. Just wasn't that impressed with them, but I see how they can be useful. Although, SketchPro is really nice with it. I just find TouchWiz is more than sufficient for my needs and stock isn't as quirky.
My galaxy siii was rooted before kitkat was out, and I have been using it until now and have not yet update to KitKat yet because AT&T is not part of it any more.
How do I get KitKat on my phone? Do I have to unroot the phone and put it back into AT&T mode to download or what should I do?
this might help.
remember:READREADREAD
BACKUPBACKUPBACKUP
http://forum.xda-developers.com/showthread.php?t=1802160
good luck
err on the side of kindness
You will need to unroot your phone and have the stock recovery.
Thank you for both replies gentleman
audit13 said:
You will need to unroot your phone and have the stock recovery.
Click to expand...
Click to collapse
I might add to this...if you removed any stock carrier or vendor apps from 4.3 while being rooted...you'll have to restore them via a Titamium Backup or some other way or the OTA update will not install properly. (I realized that the OTA update from 4.3 to 4.4.2 will patch these apps to update them to 4.4.2 compatibility)
If you can't do that or if its unreasonable to do that based on the way the phone was modified while rooted...I suggest flashing the stock 4.3 rom via Odin and then take the OTA.
Id recommend flashing the 4.3 firmware via Odin to begin with. Its starting to seem like a lot of people who even just have to unroot are having problems with the ota. I think Odin flashing stock 4.3 will give the best chance of a successful update.
mwrobe1 said:
I might add to this...if you removed any stock carrier or vendor apps from 4.3 while being rooted...you'll have to restore them via a Titamium Backup or some other way or the OTA update will not install properly. (I realized that the OTA update from 4.3 to 4.4.2 will patch these apps to update them to 4.4.2 compatibility)
If you can't do that or if its unreasonable to do that based on the way the phone was modified while rooted...I suggest flashing the stock 4.3 rom via Odin and then take the OTA.
Click to expand...
Click to collapse
I am having this issue. I rooted on 4.3 and removed Google books and newsstand. I then uprooted and did a factory reset , so everything in download mode says "official" but the apps were still missing so I downloaded them from the play store. My question is will this let me get the OTA now or do I have to push the apps to the /system directory somehow? Also if I flash the 4.3 ODIN tar file, will it trip my warranty bit? It's at 0 right now and want to keep it that way until my warranty is up.
The firmware shouldn't trip the bit, but I can't promise that. Im sure its confirmed one way or the other in its thread though.
As for those apps, they'd have to be system apps, so just installing normally won't help. More importantly though, they would also need to be the same version that was originally built into the firmware. The apps you mentioned have seen many updates and using the current versions will not work.
I got the phone 2 weeks ago and it came with 4.3 installed on it. Would I be able to use the current version and just push them to /system/app with titanium backup? I am trying to get the OTA without tripping any warranty or security measures.