Develop Bugs

Help unbricking my phone please

Hello,
I recently received the OTA update and accepted, however it messed up some apps and I went to flash a stock LJC firmware via ODIN. The issue I have is ODIN keeps failing at the sboot.bin portion. I was previously rooted using mrRobinsons root method (flashing a rooted .tar file). I can't enter recovery mode because the phone gives me the error message "firmware upgrade encountered an issue. please select recovery in Kies and try again." I'm not at all familiar with Kies and any help would be incredibly appreciated.

If you can get into download mode and use odin, then can you download twrp 2.4.1.0 tar and use it with the PDA button in odin? Un-check auto reboot in odin, then when flash ends and sitting there a few seconds, pull the battery, hold voldown home and power, and put the battery back in while holding all 3. (Yeah I know it requires a 3rd hand haha).
It should boot into new twrp.
The download for twrp is google twrp2, then select sprint gn2, then on the download page find openrecovery*2.4.1.0*.tar
If you can do that then you should be able to flash a kernel and rom and firmware from there by just putting them on the sd card. I would use the ma7 one and not try to go back to ljc at least until you get working again and get more comfortable with flashing and recovering from bad flashes like this. I would try the ma7 rom and all-in-one firmware zips not the ma7 update.zip in your case. The update.zip requires a stock recovery to run and possibly a stock everything else too.
Sent from my SPH-L900 using xda premium
---------- Post added at 12:18 PM ---------- Previous post was at 12:08 PM ----------
Remember don't wipe data. Flashing the twrp recovery, rom, kernel and firmware should be fine.
If you want to try something even safer just on the off chance your rom is ok just not bootable, you can try flashing just twrp and kernel snd see if it boots. If not then go back into twrp and flash the rom. The data may or may not be compatible with ma7 but nothing we can do about that. If the apps all crash then you could try flashing a ljc based rom and see if the data works on that. All else fails you may have to wipe data from twrp.
In all cases always wipe cache and dalvik from twrp each time you flash anything else.
Sent from my SPH-L900 using xda premium

Thanks for info but I can't seem to find a .md5 type file when I download the zipfile for twrp recovery. I try extracting and it's just an image file. Should I just select that as the PDA file to flash via odin? And I tried using Kies in the interim but my phone was stuck on the "connecting" animation when I plug my phone in.

Might be making progress... I'm working on an emergency recovery via Kies and it's about half way through. I really hope this at least lets me boot up the phone beyond just ODIN mode. Thanks for the help again KeyofR I'm going to keep searching for a md5 file of twrp recovery in the mean time.
EDIT: I think Kies is failing at the same part as ODIN when I tried to manually flash a LJC stock recovery (the sboot.bin portion). If anyone has a link to a md5 file of twrp recovery that would be awesome, I can't seem to find that type only "image" files.
EDIT #2: Bless you lol I just ran the actual .zip file in odin and it worked. I'm hoping I can just flash a stock rom I'll live with a complete wipe, I have everything important backed up. Thank you very much again!

What I said was grab the tar file not zip or md5. And don't unpack it. Just save it. In odin next to PDA browse an select that tar file. That will flash twrp to the recovery partition. You may need to do the crazy battery pull three finger salute battery insert thing to boot into twrp the first time. I don't know why that is, it just is sometimes. If you don't it tries to boot the regular os and if that succeds it somehow puts a stock recovery back and you have to flash twrp on again. Once you've booted into twrp one time, no more problem, just a one time thing.
Sent from my SPH-L900 using xda premium

Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator

How is this against the rules? I'm lost. Oh well
Sent from my Amazing Galaxy Note 2!

yankees45us said:
How is this against the rules? I'm lost. Oh well
Sent from my Amazing Galaxy Note 2!
Click to expand...
Click to collapse
It was posted in the development section.... Questions or ask for help go in q&a ... that's why its not a ROM or kernel ....
Sent from my SPH-L900 using Xparent BlueTapatalk 2

Where do I get twrp2 tar
Sent from my EVO using xda app-developers app

bigbird2 said:
Where do I get twrp2 tar
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
From the twrp website ... you shouldn't need it use goo manager to install it ...
When you open goo press menu and install open recovery script ...
Sent from my SPH-L900 using Xparent BlueTapatalk 2

Thanks!!!
I bricked my GN2 today for the first time....found your solution below within a few minutes of searching XDA and bam...Im back up.
Many thanks!
KEYofR said:
If you can get into download mode and use odin, then can you download twrp 2.4.1.0 tar and use it with the PDA button in odin? Un-check auto reboot in odin, then when flash ends and sitting there a few seconds, pull the battery, hold voldown home and power, and put the battery back in while holding all 3. (Yeah I know it requires a 3rd hand haha).
It should boot into new twrp.
The download for twrp is google twrp2, then select sprint gn2, then on the download page find openrecovery*2.4.1.0*.tar
If you can do that then you should be able to flash a kernel and rom and firmware from there by just putting them on the sd card. I would use the ma7 one and not try to go back to ljc at least until you get working again and get more comfortable with flashing and recovering from bad flashes like this. I would try the ma7 rom and all-in-one firmware zips not the ma7 update.zip in your case. The update.zip requires a stock recovery to run and possibly a stock everything else too.
Sent from my SPH-L900 using xda premium
---------- Post added at 12:18 PM ---------- Previous post was at 12:08 PM ----------
Remember don't wipe data. Flashing the twrp recovery, rom, kernel and firmware should be fine.
If you want to try something even safer just on the off chance your rom is ok just not bootable, you can try flashing just twrp and kernel snd see if it boots. If not then go back into twrp and flash the rom. The data may or may not be compatible with ma7 but nothing we can do about that. If the apps all crash then you could try flashing a ljc based rom and see if the data works on that. All else fails you may have to wipe data from twrp.
In all cases always wipe cache and dalvik from twrp each time you flash anything else.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse

Something weird

Hi guys i had the Note 5120 running 4.1.2 and all the while rooted with Framaroot 1.60 and had install multi window manager. I did not install custom recovery so i did not have any backups made as im just a simple user and will make use of the root for some enhancements. Today i installed font installer https://play.google.com/store/apps/details?id=com.jrummy.font.installer. After i chose my desire font, it request for a reboot and i did.
That is where the problem arised. My device is now stuck at the welcome screen with the word Samsung glowing and thats about it. I had done a hard reset but still the same. And i didnt manage to get any further info of my built and anything else *sigh*.
Anyone here be able to help me on this as that is all the rooting i have done on this phone. Never tried Odin or anything else. Hopefully some can help revive my 8 days old Note

Your device is in a bootloop. Reflash your stock ROM.

Lim Wee Huat said:
Your device is in a bootloop. Reflash your stock ROM.
Click to expand...
Click to collapse
Just as i found out about it. I am currently downloading the stock rom from sammobile. Just to be sure that i can place the stock rom in my ext sd card and use stock recovery to flash it after i rename it as update.zip?

you can just do a factory reset in stock recovery and your tablet will go back to factory fresh status..dont bother downloading or flashing anything, just factory reset and you are back to square one

In most cases, you need to extract the tar.md5 file from zip and flash using odin.
Sent from my GT-N5120 using xda app-developers app

wase4711 said:
you can just do a factory reset in stock recovery and your tablet will go back to factory fresh status..dont bother downloading or flashing anything, just factory reset and you are back to square one
Click to expand...
Click to collapse
it doesnt work for me. it will end up with the same again with the word SAMSUNG.

mayday2 said:
In most cases, you need to extract the tar.md5 file from zip and flash using odin.
Sent from my GT-N5120 using xda app-developers app
Click to expand...
Click to collapse
So i need to use odin to flash the stock rom that i have located for my device. Flashing from stock recovery wont work yah.
Edited: My device is now up and running. Flashed the right firmware via Odin. Thanks to you guys!

[Q] Sprint Note 2 (SPH-L900) Bricked after attempted 4.3 Update

I've been having issue with my Sprint Note 2 for a while. I've also posted this to Reddit and other parts of the forum but so far have gotten no way to fix my issue. Here's the link to Reddit: http://www.reddit.com/r/techsupport...nt_note_2_sphl900_bricked_after_attempted_43/
Sorry, I didn't want to type that all up again and having to deal with formatting and such.
Basically, the gist of it, from what I can gather is that I have accidentally loaded the 4.3 bootloader with KNOX and it is currently preventing me from doing anything productive (flashing CWMR, rooting, installing stock, etc). I read here on the forum that there were ways to do so, especially this post: http://forum.xda-developers.com/showthread.php?p=46861777
I was wondering if there were steps for the Sprint Note 2 SPH-L900?
Any help in debricking my phone is appreciated.

Try these steps.
1. Boot phone into Odin/download mode
2. Flash twrp or cwmr via Odin.
3. When it reboots pull battery and then boot into recovery.
4. Flash this http://forum.xda-developers.com/showthread.php?p=36388145 it is mc2 bootloader, firmware, radio, etc...
5. Reboot phone. Things get weird for a few mins but it will boot.
You are now Knox free once again but you are also bone stock.
Sent from my SPH-L900 using XDA Premium 4 mobile app

jlmancuso said:
Try these steps.
1. Boot phone into Odin/download mode
2. Flash twrp or cwmr via Odin.
3. When it reboots pull battery and then boot into recovery.
4. Flash this http://forum.xda-developers.com/showthread.php?p=36388145 it is mc2 bootloader, firmware, radio, etc...
5. Reboot phone. Things get weird for a few mins but it will boot.
You are now Knox free once again but you are also bone stock.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've tried that multiple times. The problem here is that I can't load CWMR or TWRP. At first, I assume that I'd have to root so I downloaded the CF auto root file and flash it using ODIN. Then I tried installing CWMR (after converting to .tar using Caboomi's tool here on the forum). It would reboot and I tried holding down volume up + power + home button but nothing would happen. I try combinations of that and still nothing. I flashed the 4.3 sboot.bin to get it back to stock Samsung bootloader then retried with CWMR without rooting first this time and it still doesn't work. ODIN would tell me that it succeeds but I can't enter Recovery no mater the combination of keys that I press. I'm assuming this has to do with Knox in which case I'd just have to wait for the official 4.3 firmware on SamMobile to flash it since stock 4.1.2 won't work.

QuantumInteger said:
I've tried that multiple times. The problem here is that I can't load CWMR or TWRP. At first, I assume that I'd have to root so I downloaded the CF auto root file and flash it using ODIN. Then I tried installing CWMR (after converting to .tar using Caboomi's tool here on the forum). It would reboot and I tried holding down volume up + power + home button but nothing would happen. I try combinations of that and still nothing. I flashed the 4.3 sboot.bin to get it back to stock Samsung bootloader then retried with CWMR without rooting first this time and it still doesn't work. ODIN would tell me that it succeeds but I can't enter Recovery no mater the combination of keys that I press. I'm assuming this has to do with Knox in which case I'd just have to wait for the official 4.3 firmware on SamMobile to flash it since stock 4.1.2 won't work.
Click to expand...
Click to collapse
After flashing cwm do battery pull...Don't let it auto-reboot.
Also try different version of Odin maybe

louforgiveno said:
After flashing cwm do battery pull...Don't let it auto-reboot.
Also try different version of Odin maybe
Click to expand...
Click to collapse
I tried 3.07, 3.09, and even barebone 1.85 that came with CF auto root. It doesn't work. I can't load recovery just fine (according to ODIN) but I can't get into Recovery.

Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone

Keithgordon said:
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Click to expand...
Click to collapse
...My God..... What ever you did, it worked. Turns out, Caboomi's file didn't work too well. I couldn't get CWMR working at all even after converting to .tar. I used TWRP instead and it works. Problem was that it asked me for my password, which I don't know since I tried everything, so I had to resort to wiping everything. I installed the file jlmancuso suggested, loading it onto SD card then flashing using TWRP, and now my Samsung Note 2 is debricked.
Your file was a godsend. Thank you!

No recovery stuck on bootloop
im having the same issue could you post that dropbox link again

So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Keithgordon said:
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Click to expand...
Click to collapse

rckingws6 said:
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Click to expand...
Click to collapse
Yes, flash that file in Odin, it will downgrade you to MC2 with the MK4bootloader

Keithgordon said:
Yes, flash that file in Odin, it will downgrade you to MC2 with the MJA bootloader
Click to expand...
Click to collapse
MJA ? Isn't that an s4 bootloader?

louforgiveno said:
MJA ? Isn't that an s4 bootloader?
Click to expand...
Click to collapse
yep, sorry, I just woke up....I meant whatever version we are on with the note, what is it? MK4? I have both so I keep switching back and forth in the threads. Funny thing is, they are completely different, i will change that, thanks for pointing that out

my friend 's L900 bricked too ，but I cant download the file you provide , the error message is “Error (509) This account's public links are generating too much traffic and have been temporarily disabled”
may you provide another URL to download it or mail it to me ？ my email is [email protected] , thanks.
another question , how can i flash it into device with ODIN ？ from Pit ？ bootloader ？PDA ？PHONE ？ or others ？
Sent from my SPH-L900 using xda app-developers app
---------- Post added at 06:23 PM ---------- Previous post was at 06:14 PM ----------
Keithgordon said:
yep, sorry, I just woke up....I meant whatever version we are on with the note, what is it? MK4? I have both so I keep switching back and forth in the threads. Funny thing is, they are completely different, i will change that, thanks for pointing that out
Click to expand...
Click to collapse
my friend 's L900 bricked too ，but I cant download the file you provide , the error message is “Error (509) This account's public links are generating too much traffic and have been temporarily disabled”
may you provide another URL to download it or mail it to me ？ my email is [email protected] , thanks.
another question , how can i flash it into device with ODIN ？ from Pit ？ bootloader ？PDA ？PHONE ？ or others ？
Sent from my SPH-L900 using xda app-developers app

yea I still cant dowload it sorry for being a pest.
Keithgordon said:
Yes, flash that file in Odin, it will downgrade you to MC2 with the MK4bootloader
Click to expand...
Click to collapse

hello if you are online i need some help i dl the 4.3 note 2 update it has a different build than the one sprint has there are some features that are not on this build is there any way for me to get the ota from sprint
rckingws6 said:
yea I still cant dowload it sorry for being a pest.
Click to expand...
Click to collapse

rckingws6 said:
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Click to expand...
Click to collapse
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.

QuantumInteger said:
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
Click to expand...
Click to collapse
i need some help

yea i can get into twrp recovery now but my sdcard wont mount thats why im trying to use odin
QuantumInteger said:
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
Click to expand...
Click to collapse

For those of you who have bricked Note 2s (SPH-L900), I'm going to drop a DropBox link here to a folder of ALL of the files that I used to unbrick my phone. I experimented with multiple methods (and several sleepless nights). Some of them will be useful to you, not all. I have the Android SDK and Caboomi's converter for .img to .tar. It doesn't work too well for CWMR just FYI. ODIN-OC will attempt to load stock MC2 onto your phone but it won't work if it's bricked. Arc Converter is a program I used to try convert the MK4 .zip file to .tar to try and flash an update using ODIN. It didn't work. The steps that I took to unbrick my phone will be posted after the link.
https://www.dropbox.com/sh/c2bfpfdf0qbs6bu/ZiNC-BF5kf
Be patient. Some of the files are still updating.
Steps:
1) Put your phone into Download mode by holding volume down + power + home button at bootup
2) Use ODIN (3.07 or 3.09) to load the 4.3_Unbrick.tar file. This will take a bit of time so be patient. Once the phone boots up again, you'll get past the boot screen that says "Samsung Galaxy Note II" and you'll get the Samsung logo with the spinning icon but it will loop. This is normal.
3) Next, power off (yank the battery and cable, leave battery out but plug the cable back in) and reboot into download.
4) Flash the TWRP .tar file (don't try converting the CWMR to .tar, it won't work) then reboot.
5) Hold volume up + power + home button (be patient here)
6) You should see the Team Win logo. You're now in recovery. The TWRP may ask you for the password. It is NOT the passcode to your lockscreen or your Google password. I have no idea what it is. At this point, you'd have to wipe your phone (internal only) if you want to flash the stock recovery.
7) Load the MC2 stock recovery file with counter reset onto a microSD card and mount it onto the phone (play around with TWRP, if it doesn't see the SD card the first time, restart or play with the mount function). Just be careful not to wipe your microSD card.
8) Flash the stock recovery (give it time) and it'll restart. You should be back at 4.1.2.
EXTRA STEPS
If you're still interested in 4.3, load the MK4 update onto the microSD card as well. BEFORE you go through the activation process for the 4.1.2 firmware at boot, boot into recovery. Flash the 4.3 update using stock recovery. This should put you onto 4.3 after the phone reboots. You should now have stock 4.3 (no root).

Sorry for all the download errors, I am uploading to my websight right now and as soon as it uploads, I will post the URL, it should download much faster too. I didnt realize so many people needed it

[Q] stock/no root phone won't boot, only DL mode works

Hello,
My unrooted At&T galaxy s3 will not go past the Samsung Galaxy SIII splash screen. When I enter recovery it just gives me a dead android guy.
I had this problem before and to fix it, I used odin to flash the stock 4.0.4, then I flashed 4.1.1 (I think these are the correct versions, I followed instructions here), then my phone wouldn't OTA update to touchwiz 4.3 so I flashed it using recovery mode using instructions and files I found here. The phone worked fine for a few weeks after that, but then started to reboot randomly and delete apps. Eventually it just stopped working all together which is where I am now.
I tried to install TWRP using odin which odin says worked but when I try to go to recovery mode I still just see the dead android guy. The phone did not have USB debugging mode turned on so I am not sure if I could install a custom recovery at all.
I tried the CF-auto root that I found here which got partway through and then failed.
Do you guys have any suggestions? Is there a stock touchwiz 4.3 rom that I could flash using odin??
Thank you very much, please let me know if you require any more information, I really want to get my phone working again.

korarchaeota said:
Hello,
My unrooted At&T galaxy s3 will not go past the Samsung Galaxy SIII splash screen. When I enter recovery it just gives me a dead android guy.
I had this problem before and to fix it, I used odin to flash the stock 4.0.4, then I flashed 4.1.1 (I think these are the correct versions, I followed instructions here), then my phone wouldn't OTA update to touchwiz 4.3 so I flashed it using recovery mode using instructions and files I found here. The phone worked fine for a few weeks after that, but then started to reboot randomly and delete apps. Eventually it just stopped working all together which is where I am now.
I tried to install TWRP using odin which odin says worked but when I try to go to recovery mode I still just see the dead android guy. The phone did not have USB debugging mode turned on so I am not sure if I could install a custom recovery at all.
I tried the CF-auto root that I found here which got partway through and then failed.
Do you guys have any suggestions? Is there a stock touchwiz 4.3 rom that I could flash using odin??
Thank you very much, please let me know if you require any more information, I really want to get my phone working again.
Click to expand...
Click to collapse
It almost sounds like you're dealing with a situation I'm having on my galaxy tab. It has the internal SD chip going bad. I had to use a rom specially made to boot from a partitioned external sd card. Sorry, I can't help more, but the symptoms seem similar.
Sent from my SCH-I800 using Tapatalk

Thank you for your reply. Where did you obtain a rom that could boot from the external sd card?
wrenhal said:
It almost sounds like you're dealing with a situation I'm having on my galaxy tab. It has the internal SD chip going bad. I had to use a rom specially made to boot from a partitioned external sd card. Sorry, I can't help more, but the symptoms seem similar.
Sent from my SCH-I800 using Tapatalk
Click to expand...
Click to collapse

Try flashing the TWRP again with Odin, but make sure the auto reboot option on the left is unchecked in Odin. After flashing, unplug the phone and then hold volume up + menu + power buttons at the same time until it reboots.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app

shortydoggg said:
Try flashing the TWRP again with Odin, but make sure the auto reboot option on the left is unchecked in Odin. After flashing, unplug the phone and then hold volume up + menu + power buttons at the same time until it reboots.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I just tried it with only F. Reset Time checked, it installs it and says a green Pass!. I then unplugged it, tried to hold volume up + menu + power buttons for a while but nothing happened. I pulled the battery and then did volume up + menu + power buttons and went straight back to dead android guy. Any ideas?

Only other thing right now is to make sure you have the latest odin, which is 3.09
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app

shortydoggg said:
Only other thing right now is to make sure you have the latest odin, which is 3.09
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Trying everything with the new version of Odin results in all the same results.
Does anyone know if there is a tar (Odin flashable) version of update43.zip found in this thread?
http://forum.xda-developers.com/showthread.php?t=2387423
Thanks!

korarchaeota said:
Trying everything with the new version of Odin results in all the same results.
Does anyone know if there is a tar (Odin flashable) version of update43.zip found in this thread?
http://forum.xda-developers.com/showthread.php?t=2387423
Thanks!
Click to expand...
Click to collapse
No there's no Odin flash-able there.
Sorry, we don't seem to have any answers for your problem. It seems like it may be more of a hardware issue than software.

Did you phone boot after flashing stock 4.04?

audit13 said:
Did you phone boot after flashing stock 4.04?
Click to expand...
Click to collapse
Yes it did, the first time that this started happening. But I was unable to do that again, I thought since I flashed all the way to 4.3 and I read that once you go to 4.3 you can't go back. Is that correct?
Thank you for your help. I was hoping to try an odin flashable touchwiz 4.3 but I can't seem to find one.

So you had 4.04 on your phone and you used OTA updates to get to 4.3? If this is correct, then you can't flash a stock AT&T 4.3 ROM because it has never been made available to the public; therefore, the only 4.3 ROMs that may work are based on the leaked AT&T 4.3 ROM or compiled from an OTA update.
Once of these ROMs may get your phone going again: http://forum.xda-developers.com/showthread.php?t=2498233

audit13 said:
So you had 4.04 on your phone and you used OTA updates to get to 4.3? If this is correct, then you can't flash a stock AT&T 4.3 ROM because it has never been made available to the public; therefore, the only 4.3 ROMs that may work are based on the leaked AT&T 4.3 ROM or compiled from an OTA update.
Once of these ROMs may get your phone going again: http://forum.xda-developers.com/showthread.php?t=2498233
Click to expand...
Click to collapse
Thank you for your suggestion, all the ones I tried there need recovery to flash...not odin. Is it possibly to make an odin file from a recovery flash file??
Thanks!

korarchaeota said:
Thank you for your suggestion, all the ones I tried there need recovery to flash...not odin. Is it possibly to make an odin file from a recovery flash file??
Thanks!
Click to expand...
Click to collapse
Did you try installing Philz Touch from Odin? As was suggested earlier, don't use auto reboot. Once Philz has been installed and you see Reset in the window, disconnect the USB cable, remove the battery, replace the battery, boot into recovery, wipe and flash a custom ROM. This may help you get your phone working for now.

audit13 said:
Did you try installing Philz Touch from Odin? As was suggested earlier, don't use auto reboot. Once Philz has been installed and you see Reset in the window, disconnect the USB cable, remove the battery, replace the battery, boot into recovery, wipe and flash a custom ROM. This may help you get your phone working for now.
Click to expand...
Click to collapse
Thank you for your suggestion, but I still get the dead android guy after flashing and trying to go into recovery. Any other ideas??

korarchaeota said:
Thank you for your suggestion, but I still get the dead android guy after flashing and trying to go into recovery. Any other ideas??
Click to expand...
Click to collapse
Did you try philz or cwm? I am not sure why stock recovery is not being overwritten.

audit13 said:
Did you try philz or cwm? I am not sure why stock recovery is not being overwritten.
Click to expand...
Click to collapse
I tried twrp and philz, I haven't tried cwm yet, should I? Is it not working because I didn't enable USB debugging before it stopped working?
Thanks for your help!

korarchaeota said:
I tried twrp and philz, I haven't tried cwm yet, should I? Is it not working because I didn't enable USB debugging before it stopped working?
Thanks for your help!
Click to expand...
Click to collapse
Nope, USB debugging will not make a difference.
The latest Philz Touch is based on the latest CWM. After your flash Philz, are you letting the phone auto reboot on its own after flashing in Odin?
I know of no way to convert a custom ROM so it can be flashed in Odin.

no rom is booting please help

guys please help me tried dr ketan rom
and jellykat rom
both reach till boot screen and freeze.
i cant use odin because i need the data inside
any ideas please
OK this is not my phone so I didn't what firmware he was on
Now since no ROM is booting I flashed the new boot loader
And then as instructed i flashed stock recovery but still boot loader didnt complete install
And then flashed twrp again
And now I can't get to recovery
Edit 2 I got the boot loader from Dr.ketan ROM thread
Please anyone help I can't loose the data in the phone please help me

bump

alphatia said:
bump
Click to expand...
Click to collapse
Trying now

still doesnt work i disabled auto boot in odin and when the recovery flashed i tried entering recovery mode but the phone rebooted and got stuck at the samsung screen

alphatia said:
guys please help me tried dr ketan rom
and jellykat rom
both reach till boot screen and freeze.
i cant use odin because i need the data inside
any ideas please
OK this is not my phone so I didn't what firmware he was on
Now since no ROM is booting I flashed the new boot loader
And then as instructed i flashed stock recovery but still boot loader didnt complete install
And then flashed twrp again
And now I can't get to recovery
Edit 2 I got the boot loader from Dr.ketan ROM thread
Please anyone help I can't loose the data in the phone please help me
Click to expand...
Click to collapse
What is your recovery?
You can not come in?
If so, make a backup of what is without creating MD5 checksums then upload the rom again and restore only the data.
Regards

lud3ik said:
What is your recovery?
You can not come in?
If so, make a backup of what is without creating MD5 checksums then upload the rom again and restore only the data.
Regards
Click to expand...
Click to collapse
Here is my problem
My friend gave me his note 2 to fix WiFi it was already rooted
I downloaded slimkat and flashed it it worked good
And WiFi worked but he wanted a touchwiz look
So I downloaded jellykat ROM but didn't read the instructions and flashed with cwm
Got into bootloop then I flashed twrp recovery using Odin and reflashed the ROM but I got the fix root error and I swiped to fix
Then also bootloop ..I downloaded Dr.ketan stock ROM
And flashed philz recovery through twrp recovery and then flashed ROM also backed up efs
The phone also didn't boot stuck at bootscreen
Then I got frustrated and didn't know what to do I flashed the nd3 bl through Odin
And rebooted but nothing changed ..I read in Dr.ketan thread about flashing stock recovery and the bl
So I did all through odin and I rebooted but I had no recovery I tried flashing both twrp and cwm through Odin but also nothing
Now I have no recovery but I have download mode
I can Odin flash stock but I can't loose the data inside I really need the data

i think the problem is with the boot loader since i flashed nd3 bootloader and when device booted it didnt finish
so any ideas???

Why not any 4.4.2 stock firmware through Odin? Seems to be the easiest way to get the device started again.

Androidwizzard said:
Why not any 4.4.2 stock firmware through Odin? Seems to be the easiest way to get the device started again.
Click to expand...
Click to collapse
I need the data the pics an videos
But will this work
http://forum.xda-developers.com/showthread.php?t=2531989
Or this
http://forum.xda-developers.com/showthread.php?t=2230250
Note that I flashed nd3 and the Knox warranty void is 1

alphatia said:
I need the data the pics an videos
But will this work
http://forum.xda-developers.com/showthread.php?t=2531989
Or this
http://forum.xda-developers.com/showthread.php?t=2230250
Note that I flashed nd3 and the Knox warranty void is 1
Click to expand...
Click to collapse
Both won't work.
Download 4.4.2 stock firmware from sammobile and flash with Odin.
Data (if it is still there) won't be touched. Only system partition will be wiped.

Androidwizzard said:
Both won't work.
Download 4.4.2 stock firmware from sammobile and flash with Odin.
Data (if it is still there) won't be touched. Only system partition will be wiped.
Click to expand...
Click to collapse
Okay about the data I never wiped it but Odin might wipe it some say it will some say it won't
And why will these non wipe not work can u inform me please?

alphatia said:
Okay about the data I never wiped it but Odin might wipe it some say it will some say it won't
And why will these non wipe not work can u inform me please?
Click to expand...
Click to collapse
Look, flashing with Odin is like getting an update by Samsung. Users would turn crazy if such an update would wipe their data.
Firmware is always installed in system partition and never somewhere out.
Besides: Photos and vids are mostly saved on external SD. Where are yours?

Androidwizzard said:
Look, flashing with Odin is like getting an update by Samsung. Users would turn crazy if such an update would wipe their data.
Firmware is always installed in system partition and never somewhere out.
Besides: Photos and vids are mostly saved on external SD. Where are yours?
Click to expand...
Click to collapse
mine are saved on internal
so now only thing i can do is flash using odin?

alphatia said:
mine are saved on internal
so now only thing i can do is flash using odin?
Click to expand...
Click to collapse
No, it is not the only thing, but you have messed around such a long time and to finish the suffering I suggest to do.
It is up to you to trust or go on searching for alternatives.

Androidwizzard said:
No, it is not the only thing, but you have messed around such a long time and to finish the suffering I suggest to do.
It is up to you to trust or go on searching for alternatives.
Click to expand...
Click to collapse
Thanks a lot man iI really appreciate it but any other ideas would be much appreciated

alphatia said:
Thanks a lot man iI really appreciate it but any other ideas would be much appreciated
Click to expand...
Click to collapse
Well, two things you might do: Search for the truth about wipe data when using Odin or try to install any custom recovery to be able to flash a custom rom.

Androidwizzard said:
Well, two things you might do: Search for the truth about wipe data when using Odin or try to install any custom recovery to be able to flash a custom rom.
Click to expand...
Click to collapse
and am back cant get any recovery to work
and when searching for odin wipe most people say nothing got wiped

alphatia said:
and am back cant get any recovery to work
and when searching for odin wipe most people say nothing got wiped
Click to expand...
Click to collapse
I KNOW that nothing of your data will be wiped, I have done it three times since 4.4.2 came out on 25.4.2014
First ND3, then NE1 and lately NE2.
This is my last post here. Good luck!

Androidwizzard said:
I KNOW that nothing of your data will be wiped, I have done it three times since 4.4.2 came out on 25.4.2014
First ND3, then NE1 and lately NE2.
This is my last post here. Good luck!
Click to expand...
Click to collapse
ok man wish me luck thanks alot for alot of help

Any other suggestions before I flash 4.4.2 with Odin (currently 4.1.2) ?