Phone wont boot, recovery mode wont work - G2 and Desire Z Q&A, Help & Troubleshooting

Phone wont boot, recovery mode wont work - G2 and Desire Z Q&A, Help & Troubleshooting

My HTC g2 wont boot it vibrates like 5 times then shuts off, then I do volume down and power and that works, i try to do the pc10img thing, that wont work, i go to recovery mode, and i get the same issue, it will vibrate 5 times. I cant get it to work!?? HELP PLEASE! :fingers-crossed:

Was your recovery working earlier? Or you were trying to flash a new recovery?
Try to flash the correct recovery meant for the device.
Can you boot your device....??
You havent given enough information.
Ok sorry got it. So you arent able to boot your device.!!
Have you tried downloading the correct PC10IMG.
Are you s-off, if not, then you wont be able to flash anything through PC10IMG.zip
If everything fails, then try to reflash your device with stock ruu for your region.
Thanks....
Sent from my HTC Desire Z using xda app-developers app

won't boot, recovery gives 5 vibrations
Hello,
I have almost exactly the same- hopefully this threat will allow us get back our both DZs.
Mine starting from yesterday won't boot- stops on the HTC screen.
I can get it connected to my PC using fastbood and it is also recognized in hboot modes (hboot usb plug). Recovery doesn't work for it- phone is rebooted after 7 vibrations.
I already tried to upload the hboot as described here http://forum.xda-developers.com/showthread.php?t=1728208 (using hboot file from PC10IMG.ZIP archive in there):
and the result is:
''
sending 'hboot' (1024 KB)...
OKAY [ 0.190s]
writing 'hboot'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.328s
''
On the hboot screen I can see:
Vision PVT Shop S-ON
HBOOT 0.85.13
It not rooted, not S-OFF, and no in debugging mode and with that not recognized (if I'm correct) by adb. So the only chance to upload something is through FASBTOOT.
Please advice. I really don't want to lose my DZ.

koljaiczek said:
It not rooted, not S-OFF, and no in debugging mode and with that not recognized (if I'm correct) by adb. So the only chance to upload something is through FASBTOOT.
Please advice. I really don't want to lose my DZ.
Click to expand...
Click to collapse
Flashing a RUU seems to be your only option...

Kéno40 said:
Flashing a RUU seems to be your only option...
Click to expand...
Click to collapse
OK. Thanks for the feedback.
I tried with PC10IMG.zip on the sd card (using two with the same radio from shipped-roms_dot_com, and having no luck next to this as described in 4.1 of this one http://forum.xda-developers.com/showthread.php?p=26541170 (really good one)- unfortunately with no luck too.
Here is the replay from cmd:
----
sending 'zip' (254790 KB)...
OKAY [ 43.540s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
FAILED (remote: not allowed)
finished. total time: 76.879s
-----
This is probably because of S-ON- according to troubleshooting section also from the link above which says:
FAILED (remote: not allowed)
You did not reboot to RUU mode before running the flash command.
You are trying to use a command that you cannot use on a Locked and/or S-ON device.
So, what else can i try? how to get S-OFF using fastboot?
-----------------------------------------------------------------------------------------------
Small update:
It looks that I've found what the problem is with the command below
\sdk\platform-tools>fastboot oem boot
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8D0878FC
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x25202
(bootloader) TAG:hero panel = 0xF
(bootloader) TAG:engineerid = 0x4
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is not super CID
(bootloader) CID is HTC__032
(bootloader) setting->cid::HTC__032
(bootloader) serial number: SH19SRT00129
(bootloader) commandline from head: no_console_suspend=1
(bootloader) command line length =504
(bootloader) active commandline: board_vision.disable_uart2=0 board_visio
(bootloader) n.usb_h2w_sw=0 board_vision.disable_sdcard=0 diag.enabled=0
(bootloader) board_vision.debug_uart=0 smisize=0 userdata_sel=0 androidbo
(bootloader) ot.emmc=true androidboot.baseband=26.10.04.03_M androidboot
(bootloader) .cid=HTC__032 androidboot.batt_poweron=good_battery androidb
(bootloader) oot.carrier=HTC-EastEurope androidboot.mid=PC1011000 android
(bootloader) boot.keycaps=qwerty androidboot.mode=normal androidboot.seri
(bootloader) alno=SH19SRT00129 androidboot.bootloader=0.85.0013 zygote_on
(bootloader) eshot=off kmemleak=off no_console_suspend=1
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) aARM_Partion[6].name=devlog
(bootloader) aARM_Partion[7].name=pdata
(bootloader) partition number=8
(bootloader) Valid partition num=8
(bootloader) jump_to_kernel: machine_id(2245), tags_addr(0x4000100), kern
(bootloader) el_addr(0x4008000)
(bootloader) -------------------hboot boot time:31538 msec
FAILED (status read failed (Too many links))
finished. total time: 9.369s
-------------------------------------------------------------------------------------
So how to upload the new hboot from fastboot with s-on?
Thanks a lot in advance

koljaiczek said:
OK. Thanks for the feedback.
I tried with PC10IMG.zip on the sd card (using two with the same radio from shipped-roms_dot_com, and having no luck next to this as described in 4.1 of this one http://forum.xda-developers.com/showthread.php?p=26541170 (really good one)- unfortunately with no luck too.
Here is the replay from cmd:
----
Thanks a lot in advance
Click to expand...
Click to collapse
I meant flashing a RUU.exe
But it won't work anyway...

Kéno40 said:
I meant flashing a RUU.exe
But it won't work anyway...
Click to expand...
Click to collapse
Ordered a new battery, hopefully this resolves the issue.

Related

[Q] Half way to brick...

Hi!
I need some help!
I want to sell my phone, so I want to go back to stock rom.
I downloaded wwe rom ruu installer and started the update process.
Something wrong is happened and my phone now is on half way the stock and rooted.
The bootloader and the fastboot is accesibble, but the phone is doesn't boot.
Recovery not accessible and the security is on. (S-ON)
I tried to repeat the ruu install, but it doesn't succesfull. Error 155 Unknown Error.
I tried to install many ruu versions, but nothing.
I copied out from the ruu installers the rom.zip and I put to sdcard renamed PB99IMG.zip.
The bootlader read the zip file and then checking but after go back to normal menu. No option for update.
I read lot of forums, but I can't find the solution. I don't have more ideas.
Somebody can help me?
Atesz

Atesz79 said:
Hi!
I need some help!
I want to sell my phone, so I want to go back to stock rom.
I downloaded wwe rom ruu installer and started the update process.
Something wrong is happened and my phone now is on half way the stock and rooted.
The bootloader and the fastboot is accesibble, but the phone is doesn't boot.
Recovery not accessible and the security is on. (S-ON)
I tried to repeat the ruu install, but it doesn't succesfull. Error 155 Unknown Error.
I tried to install many ruu versions, but nothing.
I copied out from the ruu installers the rom.zip and I put to sdcard renamed PB99IMG.zip.
The bootlader read the zip file and then checking but after go back to normal menu. No option for update.
I read lot of forums, but I can't find the solution. I don't have more ideas.
Somebody can help me?
Atesz
Click to expand...
Click to collapse
If you have a goldcard then flash the latest RUU, if you haven't follow this process to create the goldcard:
boot into fastboot, then type:
Code:
fastboot oem gencheckpt
this will reboot the phone into recovery,
then type:
Code:
adb shell cat /sys/class/mmc_host/mmc1/mmc1*/cid
This will give you a CID, which you need to copy down meticulously.
Then once you have the number, follow this guide. (you will obviously have to skip the bit of the guide where he is getting the CID - because you already have it)
NOTE: Because the flashing process didn't complete, there is a chance that the phone will not boot into recovery as it may be damaged, and it will not be possible to create a goldcard.
If it does work however, once you've got the goldcard flash the latest WWE RUU

Thank you for your answer!
This is the output of the fastboot oem gencheckpt:
C:\Program Files (x86)\Android\android-sdk\tools>fastboot.exe oem gencheckpt
< waiting for device >
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8E07E8CC
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x21F04
(bootloader) TAG:hero panel = 0x0
(bootloader) TAG:engineerid = 0x0
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is not super CID
(bootloader) CID is HTC__032
(bootloader) setting->cid::HTC__032
(bootloader) serial number: HT05XPL05483
(bootloader) command line length =409
(bootloader) active commandline: board_bravo.disable_uart3=0 board_bravo.
(bootloader) usb_h2w_sw=1 board_bravo.disable_sdcard=1 diag.enabled=0 boa
(bootloader) rd_bravo.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
(bootloader) mmc=false androidboot.baseband=4.08.00.09 androidboot.cid=H
(bootloader) TC__032 androidboot.carrier=HTC-EastEurope androidboot.mid=P
(bootloader) B9920000 androidboot.keycaps=qwerty androidboot.mode=recover
(bootloader) y androidboot.serialno=HT05XPL05483 androidboot.bootloader=0
(bootloader) .83.0001
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) partition number=6
(bootloader) Valid partition num=6
(bootloader) mpu_nand_acpu_rw 23A 1000
(bootloader) jump_to_kernel: machine_id(2457), tags_addr(0x20000100), ker
(bootloader) nel_addr(0x20008000)
(bootloader) -------------------hboot boot time:4197 msec
FAILED (status read failed (Too many links))
finished. total time: 5.070s
After that the phone is trying the recovery boot, but no picture on the phone just something muddy thing. I see something green color, maybe this the old clockworkmod recovery.
I have warranty for the phone, but the alpharev starting picture is still on the phone

Atesz79 said:
Thank you for your answer!
This is the output of the fastboot oem gencheckpt:
C:\Program Files (x86)\Android\android-sdk\tools>fastboot.exe oem gencheckpt
< waiting for device >
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8E07E8CC
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x21F04
(bootloader) TAG:hero panel = 0x0
(bootloader) TAG:engineerid = 0x0
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is not super CID
(bootloader) CID is HTC__032
(bootloader) setting->cid::HTC__032
(bootloader) serial number: HT05XPL05483
(bootloader) command line length =409
(bootloader) active commandline: board_bravo.disable_uart3=0 board_bravo.
(bootloader) usb_h2w_sw=1 board_bravo.disable_sdcard=1 diag.enabled=0 boa
(bootloader) rd_bravo.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
(bootloader) mmc=false androidboot.baseband=4.08.00.09 androidboot.cid=H
(bootloader) TC__032 androidboot.carrier=HTC-EastEurope androidboot.mid=P
(bootloader) B9920000 androidboot.keycaps=qwerty androidboot.mode=recover
(bootloader) y androidboot.serialno=HT05XPL05483 androidboot.bootloader=0
(bootloader) .83.0001
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) partition number=6
(bootloader) Valid partition num=6
(bootloader) mpu_nand_acpu_rw 23A 1000
(bootloader) jump_to_kernel: machine_id(2457), tags_addr(0x20000100), ker
(bootloader) nel_addr(0x20008000)
(bootloader) -------------------hboot boot time:4197 msec
FAILED (status read failed (Too many links))
finished. total time: 5.070s
After that the phone is trying the recovery boot, but no picture on the phone just something muddy thing. I see something green color, maybe this the old clockworkmod recovery.
I have warranty for the phone, but the alphacrew starting picture is still on the phone
Click to expand...
Click to collapse
did you try the next command after the oem gencheckpt? (have to wait a few seconds for phone to boot into recovery +/- 10 secs.. wait about 20 just to be sure)
doesn't matter if you don't see anything... as long as adb works

c:\Program Files (x86)\Android\android-sdk\platform-tools>adb shell cat /sys/cla
ss/mmc_host/mmc1/mmc1*/cid
error: device not found

oh dear :/ well that was my idea.. sorry dunno what else I could say.. you just need to find the right RUU.. if your phone is branded try the latest RUU for your phone from http://shipped-roms.com/index.php?category=android

The phone is not branded, so I don't understand why I can't install the latest stock rom. I tried all of the downloadable ruu roms.
I think, I'm done with phone rooting
Thank you for your help!

Atesz79 said:
The phone is not branded, so I don't understand why I can't install the latest stock rom. I tried all of the downloadable ruu roms.
I think, I'm done with phone rooting
Thank you for your help!
Click to expand...
Click to collapse
sure it's unbranded? if you're in Europe try the HTC_Europe RUU

Sure, HTC_032 WWE East Europe from Official HTC Store.
I tried this roms
RUU_Bravo_Froyo_HTC_WWE_2.09.405.8_Radio_32.43.00.32U_5.09.00.20_release_140022_signed.exe
RUU_Bravo_Froyo_HTC_WWE_2.10.405.2_R_Radio_32.44.00.32U_5.09.05.30_2_release_142828_signed.exe
RUU_Bravo_Froyo_HTC_WWE_2.29.405.2_Radio_32.49.00.32U_5.11.05.27_release_151783_signed.exe
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe
RUU_Bravo_HTC_Europe_1.15.405.1_Radio_32.30.00.28U_4.05.00.11_release_121684.exe
RUU_Bravo_HTC_Europe_1.15.405.3_Radio_32.30.00.28U_4.05.00.11_release_121865.exe
RUU_Bravo_HTC_WWE_1.15.405.4_Radio_32.30.00.28U_4.05.00.11_release_122704.exe
RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4.06.00.02_2_release_126984_signed.exe
RUU_Bravo_HTC_WWE_1.21.405.2_T2_Radio_32.41.00.32U_4.08.00.09_release_137222_signed.exe

Atesz79 said:
Sure, HTC_032 WWE East Europe from Official HTC Store.
I tried this roms
RUU_Bravo_Froyo_HTC_WWE_2.09.405.8_Radio_32.43.00.32U_5.09.00.20_release_140022_signed.exe
RUU_Bravo_Froyo_HTC_WWE_2.10.405.2_R_Radio_32.44.00.32U_5.09.05.30_2_release_142828_signed.exe
RUU_Bravo_Froyo_HTC_WWE_2.29.405.2_Radio_32.49.00.32U_5.11.05.27_release_151783_signed.exe
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe
RUU_Bravo_HTC_Europe_1.15.405.1_Radio_32.30.00.28U_4.05.00.11_release_121684.exe
RUU_Bravo_HTC_Europe_1.15.405.3_Radio_32.30.00.28U_4.05.00.11_release_121865.exe
RUU_Bravo_HTC_WWE_1.15.405.4_Radio_32.30.00.28U_4.05.00.11_release_122704.exe
RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4.06.00.02_2_release_126984_signed.exe
RUU_Bravo_HTC_WWE_1.21.405.2_T2_Radio_32.41.00.32U_4.08.00.09_release_137222_signed.exe
Click to expand...
Click to collapse
OH... okay.... lol eerrmmmm maybe we could try and push the RUU manually...
Extract the rom.zip from the latest WWE RUU
Once you have copied it to your desktop shutdown the RUU
in c:\ click create new folder and name it RUU
put the rom.zip in the RUU folder
plug your phone in and open command prompt and type
Code:
fastboot oem gencheckpt
wait until phone boots recovery
Code:
adb shell reboot oem-78
fastboot erase cache
fastboot flashzip C:\RUU\rom.zip
fastboot reboot
strong chance it won't work with s-on

adb shell: error: device not found
If i boot to fastboot and then fastboot flashzip: signature verify fail
There is a way to go back to s-off?

Atesz79 said:
adb shell: error: device not found
If i boot to fastboot and then fastboot flashzip: signature verify fail
There is a way to go back to s-off?
Click to expand...
Click to collapse
not entirely sure it's possible to S-OFF from bootloader, AFAIK you need to be booted into a ROM.. ahh this is a pain in the butt

Yes this is...
If you have any more idea don't hesitate write to me...
Thanks bortak!

not possible to S-OFF if you're not booted into a ROM
[22:27] <bortak> is it possible to S-OFF through fastboot, without being booted up into a ROM?
[22:29] <@hyuh> bortak: no it is not possible.
[22:29] <bortak> thanks, that's what I thought
Click to expand...
Click to collapse

Ok, I understand.
Can I delete the apharev logo if I'm not booted into a ROM? (Why so serious-Joker)

Atesz79 said:
Ok, I understand.
Can I delete the apharev logo if I'm not booted into a ROM? (Why so serious-Joker)
Click to expand...
Click to collapse
You can with RUU (but y'know...) or with fastboot (but y'know...) so I don't thnk you can at this stage

Ok, thank you!

stack on fastboot oem rebootRUU

hey guys so am here trying to flash the RUU with the zip file at the instructions firmware.zip
as instructed :
1.i relocked the bootloader
2.downloaded the file firmware.zip from the link which contains the hboot 1.31
3. typed fastboot oem rebootRUU and my htc went in a black screen with the htc icon
4. typed the command fastboot flash zip firmware.zip but am having a problem.
i know it says u might get an error and keep trying but i ve done lots of times and still nothing getting the same errors in the same order
first is
1. C:\Users\FinalAsch\Downloads\OneXRoot>fastboot flash zip firmware.zip
sending 'zip' (13013 KB)...
OKAY [ 1.690s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
FAILED (remote: 99 unknown fail)
finished. total time: 2.311s
2. C:\Users\FinalAsch\Downloads\OneXRoot>fastboot flash zip firmware.zip
sending 'zip' (13013 KB)...
FAILED (remote: (00030003))
finished. total time: 0.001s
3.C:\Users\FinalAsch\Downloads\OneXRoot>fastboot flash zip firmware.zip
sending 'zip' (13013 KB)...
and there it stops loading forever...
i ve done it at least 10 times and same thing if anyone knows or encountered same prob plz help :3

Solidarious said:
hey guys so am here trying to flash the RUU with the zip file at the instructions firmware.zip
as instructed :
1.i relocked the bootloader
2.downloaded the file firmware.zip from the link which contains the hboot 1.31
3. typed fastboot oem rebootRUU and my htc went in a black screen with the htc icon
4. typed the command fastboot flash zip firmware.zip but am having a problem.
i know it says u might get an error and keep trying but i ve done lots of times and still nothing getting the same errors in the same order
first is
1. C:\Users\FinalAsch\Downloads\OneXRoot>fastboot flash zip firmware.zip
sending 'zip' (13013 KB)...
OKAY [ 1.690s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
FAILED (remote: 99 unknown fail)
finished. total time: 2.311s
2. C:\Users\FinalAsch\Downloads\OneXRoot>fastboot flash zip firmware.zip
sending 'zip' (13013 KB)...
FAILED (remote: (00030003))
finished. total time: 0.001s
3.C:\Users\FinalAsch\Downloads\OneXRoot>fastboot flash zip firmware.zip
sending 'zip' (13013 KB)...
and there it stops loading forever...
i ve done it at least 10 times and same thing if anyone knows or encountered same prob plz help :3
Click to expand...
Click to collapse
reboot the phone in bootloader and then re-type
Code:
fastboot oem rebootRUU
and run this again
Code:
fastboot flash zip firmware.zip

matt95 said:
reboot the phone in bootloader and then re-type
Code:
fastboot oem rebootRUU
and run this again
Code:
fastboot flash zip firmware.zip
Click to expand...
Click to collapse
Hi.
I am stuck at the same point and your tip didn't help. Any more suggestions?
Thank you!
---------- Post added at 07:17 PM ---------- Previous post was at 06:29 PM ----------
I figured out.
Bootloader needs to be locked.
fastboot oem lock solved my problem.

btoledob said:
Hi.
I am stuck at the same point and your tip didn't help. Any more suggestions?
Thank you!
---------- Post added at 07:17 PM ---------- Previous post was at 06:29 PM ----------
I figured out.
Bootloader needs to be locked.
fastboot oem lock solved my problem.
Click to expand...
Click to collapse
there was written that

Hey so I am also stuck at the "fastboot oem rebootRUU" section (S-OFF comprehensive method for Droid Incredible 2), my phone boots up to the black screen with the silver "HTC" and then just sits there... is that what it is supposed to do, or should something else happen? If that is what it is supposed to do; as soon as this HTC screen pops up I'm clear to run the flash command... or... ?
Thanks!!

67SS said:
Hey so I am also stuck at the "fastboot oem rebootRUU" section (S-OFF comprehensive method for Droid Incredible 2), my phone boots up to the black screen with the silver "HTC" and then just sits there... is that what it is supposed to do, or should something else happen? If that is what it is supposed to do; as soon as this HTC screen pops up I'm clear to run the flash command... or... ?
Thanks!!
Click to expand...
Click to collapse
it is supposed to do so, follow the commands above and flash the firmware then reboot the phone

Yes its supposed to stay on the black screen. You just run the fastboot command stated previously to flash the firmware.
If it fails. Any command after it will usually also fail (bootloader sucks)
Reboot and try again
Sent from my HTC One X using xda app-developers app

bagofcrap24 said:
Yes its supposed to stay on the black screen. You just run the fastboot command stated previously to flash the firmware.
If it fails. Any command after it will usually also fail (bootloader sucks)
Reboot and try again
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Okay cool, good to know. Thanks guys!

please help i type fastboot oem rebootRUU and not my phone is stuck on a black htc screen and not listed under adb devices
**EDIT**
ok i found a way to fix it, just had to type fastboot oem boot and it rebooted my phone needless to say im not messing with this again

stucked on fastboot oem rebootRUU too
I am stuck at fastboot oem rebootRUU - it just blocks in white screen and do not accept any fastboot commands.
Here is what my fast oem boot says:
(bootloader) Boot/Recovery signature checking...
(bootloader) Boot/Recovery signature checking...
(bootloader) setup_tag addr=0x80400100 cmdline add=0xC02F55A4
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:skuid 0x2ED00
(bootloader) TAG:hero panel = 0x2940043
(bootloader) TAG:engineerid = 0x0
(bootloader) TAG: PS ID = 0x0
(bootloader) TAG: Gyro ID = 0x0
(bootloader) Device CID is not super CID
(bootloader) CID is HTC__102
(bootloader) setting->cid::HTC__102
(bootloader) serial number: SH245W402589
(bootloader) command line length =731
(bootloader) active commandline: reset_status=0 board_ville.disable_uart3
(bootloader) =0 diag.enabled=0 board_ville.debug_uart=0 userdata_sel=0 an
(bootloader) droidboot.emmc=true androidboot.pagesize=2048 skuid=0 ddt=20
(bootloader) ats=0 androidboot.lb=0 uif=#000 td.sf=1 td.td=1 td.ofs=328
(bootloader) td.prd=1 td.dly=0 td.tmo=300 hlog.ofs=628 un.ofs=694 imc_on
(bootloader) line_log=0 androidboot.efuse_info=NFSH androidboot.baseband
(bootloader) =1.11.50.05.28 androidboot.cid=HTC__102 androidboot.devicere
(bootloader) v=3 androidboot.batt_poweron=good_battery androidboot.carrie
(bootloader) r=HTC-GER androidboo
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=local
(bootloader) aARM_Partion[5].name=cache
(bootloader) aARM_Partion[6].name=userdata
(bootloader) aARM_Partion[7].name=devlog
(bootloader) aARM_Partion[8].name=pdata
(bootloader) aARM_Partion[9].name=fat
(bootloader) aARM_Partion[A].name=extra
(bootloader) aARM_Partion.name=reserve
(bootloader) aARM_Partion[C].name=radio
(bootloader) aARM_Partion[D].name=adsp
(bootloader) aARM_Partion[E].name=dsps
(bootloader) aARM_Partion[F].name=wcnss
(bootloader) aARM_Partion[10].name=radio_config
(bootloader) aARM_Partion[11].name=modem_st1
(bootloader) aARM_Partion[12].name=modem_st2
(bootloader) aARM_Partion[13].name=reserve
(bootloader) partition number=20
(bootloader) Valid partition num=20
(bootloader) setting_get_bootmode() = 2
(bootloader) ram size = 0
(bootloader) TZ_HTC_SVC_SET_DDR_MPU ret = 0
(bootloader) smem 90005000 (phy 90005000): TZ_HTC_SVC_UPDATE_SMEM ret = 0
(bootloader) TZ_HTC_SVC_LOG_OPERATOR ret = 0
(bootloader) TZ_HTC_SVC_ENC ret = 0
(bootloader) TZ_HTC_SVC_DISABLE ret = 474079232 (0x1C41E000)
(bootloader) Start Verify: 3
(bootloader) jump_to_kernel: machine_id(3751), tags_addr(0x80400100), ker
(bootloader) nel_addr(0x80408000)
(bootloader) -------------------hboot boot time:33989 msec
FAILED (status read failed (Too many links))
finished. total time: 6.601s
and it BLOCKS here in white screen HTC and does not accept fastboot commands! looks like bootloader can not load some file to continue ?!
Please HELP!
Gungrave223 said:
please help i type fastboot oem rebootRUU and not my phone is stuck on a black htc screen and not listed under adb devices
**EDIT**
ok i found a way to fix it, just had to type fastboot oem boot and it rebooted my phone needless to say im not messing with this again
Click to expand...
Click to collapse

tod_htc said:
I am stuck at fastboot oem rebootRUU - it just blocks in white screen and do not accept any fastboot commands.
Here is what my fast oem boot says:
(bootloader) Boot/Recovery signature checking...
(bootloader) Boot/Recovery signature checking...
(bootloader) setup_tag addr=0x80400100 cmdline add=0xC02F55A4
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:skuid 0x2ED00
(bootloader) TAG:hero panel = 0x2940043
(bootloader) TAG:engineerid = 0x0
(bootloader) TAG: PS ID = 0x0
(bootloader) TAG: Gyro ID = 0x0
(bootloader) Device CID is not super CID
(bootloader) CID is HTC__102
(bootloader) setting->cid::HTC__102
(bootloader) serial number: SH245W402589
(bootloader) command line length =731
(bootloader) active commandline: reset_status=0 board_ville.disable_uart3
(bootloader) =0 diag.enabled=0 board_ville.debug_uart=0 userdata_sel=0 an
(bootloader) droidboot.emmc=true androidboot.pagesize=2048 skuid=0 ddt=20
(bootloader) ats=0 androidboot.lb=0 uif=#000 td.sf=1 td.td=1 td.ofs=328
(bootloader) td.prd=1 td.dly=0 td.tmo=300 hlog.ofs=628 un.ofs=694 imc_on
(bootloader) line_log=0 androidboot.efuse_info=NFSH androidboot.baseband
(bootloader) =1.11.50.05.28 androidboot.cid=HTC__102 androidboot.devicere
(bootloader) v=3 androidboot.batt_poweron=good_battery androidboot.carrie
(bootloader) r=HTC-GER androidboo
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=local
(bootloader) aARM_Partion[5].name=cache
(bootloader) aARM_Partion[6].name=userdata
(bootloader) aARM_Partion[7].name=devlog
(bootloader) aARM_Partion[8].name=pdata
(bootloader) aARM_Partion[9].name=fat
(bootloader) aARM_Partion[A].name=extra
(bootloader) aARM_Partion.name=reserve
(bootloader) aARM_Partion[C].name=radio
(bootloader) aARM_Partion[D].name=adsp
(bootloader) aARM_Partion[E].name=dsps
(bootloader) aARM_Partion[F].name=wcnss
(bootloader) aARM_Partion[10].name=radio_config
(bootloader) aARM_Partion[11].name=modem_st1
(bootloader) aARM_Partion[12].name=modem_st2
(bootloader) aARM_Partion[13].name=reserve
(bootloader) partition number=20
(bootloader) Valid partition num=20
(bootloader) setting_get_bootmode() = 2
(bootloader) ram size = 0
(bootloader) TZ_HTC_SVC_SET_DDR_MPU ret = 0
(bootloader) smem 90005000 (phy 90005000): TZ_HTC_SVC_UPDATE_SMEM ret = 0
(bootloader) TZ_HTC_SVC_LOG_OPERATOR ret = 0
(bootloader) TZ_HTC_SVC_ENC ret = 0
(bootloader) TZ_HTC_SVC_DISABLE ret = 474079232 (0x1C41E000)
(bootloader) Start Verify: 3
(bootloader) jump_to_kernel: machine_id(3751), tags_addr(0x80400100), ker
(bootloader) nel_addr(0x80408000)
(bootloader) -------------------hboot boot time:33989 msec
FAILED (status read failed (Too many links))
finished. total time: 6.601s
and it BLOCKS here in white screen HTC and does not accept fastboot commands! looks like bootloader can not load some file to continue ?!
Please HELP!
Click to expand...
Click to collapse
Can you go in bootloader turn off the phone press volume down +power button then connect the phone to a computer. And I think you are in the wrong forum because I am sure your phone is not ONE X because I dont remember ONE X to have radio like this androidboot.baseband=1.11.50.05.28

[Q] SD Card not recognized

I know that there are lots of posts about this issue, but i think i ran down of options, so had to open up another one...
I had the touch on my desire broken maybe a year ago. I was using it like that for a year, until few weeks ago when i decided i should finally replace it. Have to notice here that the phone was working without any issue for all that time, even with broken touch. When I got the phone back with new touch from the repair shop, some issues came up...the wireless was not turning on (it was showing Error message), also the sd card was not recognized. So i returned it for another check, they fixed the wireless but the sd card problem is still there. The folks from the repair shop told me that they checked and from hardware point there was nothing wrong, so I should check for any software issue.
My device:
BRAVO PVT3 SHIP S-OFF
HBOOT-0.93.0001
TOUCH PANEL-SYNT0101
RADIO-5.17.05.23
Running on CM7.2.0.1-bravo
1. I tried another card, not working also.
2. Did factory reset, nothing changed.
3. Re-formatted the card as fat32 primary on my pc (where is readable without any problem), again nothing.
4. Tried the commands fastboot oem enableqxdm 0 and fastboot oem eraseconfig, the output tells everything ok but sd still not working.
Code:
C:\android-sdk-windows\platform-tools>fastboot oem enableqxdm 0
...
OKAY [ 0.092s]
finished. total time: 0.094s
C:\android-sdk-windows\platform-tools>fastboot oem eraseconfig
...
(bootloader) Erase config: complete
OKAY [ 0.092s]
finished. total time: 0.097s
5.Tried fastboot oem reboot, it says something like FAILED and then reboots...the output is as followed:
Code:
C:\android-sdk-windows\platform-tools>fastboot oem boot
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8E07F9F0
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x26A0D
(bootloader) TAG:hero panel = 0x3
(bootloader) TAG:engineerid = 0x0
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is not super CID
(bootloader) CID is HTC__032
(bootloader) setting->cid::HTC__032
(bootloader) serial number: HT09HPL04877
(bootloader) commandline from head: no_console_suspend=1 msmsdcc_sdioirq=
(bootloader) 1 wire.search_count=5
(bootloader) command line length =466
(bootloader) active commandline: board_bravo.disable_uart3=0 board_bravo.
(bootloader) usb_h2w_sw=0 board_bravo.disable_sdcard=0 diag.enabled=0 boa
(bootloader) rd_bravo.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
(bootloader) mmc=false androidboot.baseband=5.17.05.23 androidboot.cid=H
(bootloader) TC__032 androidboot.carrier=HTC-EastEurope androidboot.mid=P
(bootloader) B9920000 androidboot.keycaps=qwerty androidboot.mode=normal
(bootloader) androidboot.serialno=HT09HPL04877 androidboot.bootloader=0.9
(bootloader) 3.0001 no_console_suspend=1 msmsdcc_sdioirq=1 wire.search_co
(bootloader) unt=5
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) partition number=6
(bootloader) Valid partition num=6
(bootloader) jump_to_kernel: machine_id(2457), tags_addr(0x20000100), ker
(bootloader) nel_addr(0x20008000)
(bootloader) -------------------hboot boot time:629851 msec
FAILED (status read failed (Too many links))
finished. total time: 11.766s
6. I switched from CWM to AmonRa recovery, samo result.
7.I even tried by switching between unrevoked drivers and the official desire drivers, tried everything stated above, same result.
So did I miss anything? Which drivers should i use? After the two fastboot commands, should I reboot regular or reboot bootloader? Any advice is welcomed. Tx

Maybe you are usb bricked.
If you have 4ext recovery try usb brick fix from menu , if not install 4ext from fastboot and try then

Seems a strange coincidence that Wi-Fi and storage worked perfectly before the shop had it, afterwards they fixed the Wi-Fi (which they must have broken) but were unable to fix the storage which they're blaming on anything but themselves. Either take it back and fire some f'ks into them, or strip it down and reconnect everything yourself
Sent from my HTC Desire using Tapatalk 2

Frozen after a storm. No way to access recovery

Hello, I'm a poor noob and I'm in trouble with my Htc Desire
I have CM7 on it (s-off, of course)
After being surprised by a storm while I was on my scooter, the device got wet and turned off. I've waited a long time and when I've tried to turn it on, it got stuck on "Are you serious?" screen.
I can access fastboot mode, but vol buttons are unresponsive.
Neither I can access recovery mode.
So I've tried to flash everything with adb/fastboot via prompt screen.
No way to flash any recovery on it, when I use fastboot boot recovery.img, it remains frozen on Are you serious sceen.
Every time I try to flash a Rom I got errors messages.
For example, with CM10 I got this in response
sending 'zip' (169346 KB)... OKAY [ 25.989s]
writing 'zip'... FAILED (remote: not allowed)
while with fallout 5 rom or Viper
sending 'zip' (443849 KB)... FAILED (remote: data length is too large)
What am I missing?
These are infos on hboot screen
SPL/hboot version: 6.93.1002.
Radio version: 5.14.05.17.
Main software version: 2.29.405.5.
cid: htc__405.
cpld: none.
product: bravo.
mid: pb9920000.
security: off.
build-mode: ship.
Please, save my dear cell!

powhatan said:
Hello, I'm a poor noob and I'm in trouble with my Htc Desire S.
I have CM7 on it (s-off, of course)
After being surprised by a storm while I was on my scooter, the device got wet and turned off. I've waited a long time and when I've tried to turn it on, it got stuck on "Are you serious?" screen.
I can access fastboot mode, but vol buttons are unresponsive.
Neither I can access recovery mode.
So I've tried to flash everything with adb/fastboot via prompt screen.
No way to flash any recovery on it, when I use fastboot boot recovery.img, it remains frozen on Are you serious sceen.
Every time I try to flash a Rom I got errors messages.
For example, with CM10 I got this in response
sending 'zip' (169346 KB)... OKAY [ 25.989s]
writing 'zip'... FAILED (remote: not allowed)
while with fallout 5 rom or Viper
sending 'zip' (443849 KB)... FAILED (remote: data length is too large)
What am I missing?
These are infos on hboot screen
SPL/hboot version: 6.93.1002.
Radio version: 5.14.05.17.
Main software version: 2.29.405.5.
cid: htc__405.
cpld: none.
product: bravo.
mid: pb9920000.
security: off.
build-mode: ship.
Please, save my dear cell!
Click to expand...
Click to collapse
ok, I've managed it to flash cwm 2.5.0.7

powhatan said:
ok, I've managed it to flash cwm 2.5.0.7
Click to expand...
Click to collapse
This is Desire only (bravo). Post in Desire S section.
Sent from my HTC One using Tapatalk 4 Beta

dvsk69 said:
This is Desire only (bravo). Post in Desire S section.
Sent from my HTC One using Tapatalk 4 Beta
Click to expand...
Click to collapse
Sorry, ctrl-c ctrl-v error
My device is Desire, I'll edit first post.
I'm trying to flash a custom ROM, but i'm stucked on partitioning SD. I've used both g-parted and easeus PM, but after creating any kind of ext partition it returns to be unallocated. Maybe I have a damaged SD?
New sdcard. Partition ok, this time. Water isn't good for SDs...
Cooldroid installed, waiting for first boot. I think it will take up to 15 mins, isn't that?

Yes that's normal
Sent from my HTC One using Tapatalk 4 Beta

dvsk69 said:
Yes that's normal
Sent from my HTC One using Tapatalk 4 Beta
Click to expand...
Click to collapse
No sign of life. Still stuck on why so serious screen...
I'm starting to be concerned...

I come from cm7, do I have to change kernel?

Kernels are incorporated into ROM zip, no need to worry about that.
It might not boot if you have inappropriate hboot table for the ROM, since you're coming from cm7 you could have cm7r2 hboot, try ROM which will fit in that or change hboot to stock and try again, take care tho, changing hboot on unstable phone might be dangerous.
If you're on stock or decide not to change, then try different ROM and see what happens. You could also try to make a log through adb and see what's going on.
Hope that water didn't damage your hardware.

freebird24h said:
Kernels are incorporated into ROM zip, no need to worry about that.
It might not boot if you have inappropriate hboot table for the ROM, since you're coming from cm7 you could have cm7r2 hboot, try ROM which will fit in that or change hboot to stock and try again, take care tho, changing hboot on unstable phone might be dangerous.
If you're on stock or decide not to change, then try different ROM and see what happens. You could also try to make a log through adb and see what's going on.
Hope that water didn't damage your hardware.
Click to expand...
Click to collapse
Now I've a different problem.
Looking for a solution about my broken microsd I've done a ruu flashing. Now when i boot phone it remains stuck in 4 triangle htc black screen.
I've tried to reflash CM7 and now I can only boot with fastboot boot oem command. How can I get rid of this?

Try to look my theader: http://forum.xda-developers.com/showthread.php?t=2371018

sterver1 said:
Try to look my theader: http://forum.xda-developers.com/showthread.php?t=2371018
Click to expand...
Click to collapse
I don't see connection with my troubles... My phone is bootable, but only with this strange trick (fastboot boot oem)
Devices infos are now these:
SPL/hboot version: 6.93.9999.
Radio version: 4.06.00.02_2.
Main software version: 2.29.405.5.
cid: htc__405.
cpld: none.
product: bravo.
mid: pb9920000.
security: off.
build-mode: ship.
Wi.fi not working, still stuck at 4 triangles black screen and when I unplug it from usb a white screen shows upo with this basically the same things
Alpharev Unlock
Bravo PVT-1 SHIP S-OFF
H-BOOT 6.93.9999
MICROP 031D
TOUCH PANEL SYNT0101
RADIO 4.06.00.02_2
RUU
This is fastboot screen when I boot
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem boot
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8E07F9F0
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x21F04
(bootloader) TAG:hero panel = 0x0
(bootloader) TAG:engineerid = 0x0
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is super CID
(bootloader) CID is super CID
(bootloader) Backup CID is HTC__405
(bootloader) setting->cid::HTC__405
(bootloader) serial number: HT04KPL02768
(bootloader) commandline from head: no_console_suspend=1 msmsdcc_sdioirq=
(bootloader) 1 wire.search_count=5
(bootloader) command line length =461
(bootloader) active commandline: board_bravo.disable_uart3=0 board_bravo.
(bootloader) usb_h2w_sw=0 board_bravo.disable_sdcard=0 diag.enabled=0 boa
(bootloader) rd_bravo.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
(bootloader) mmc=false androidboot.baseband=4.06.00.02_2 androidboot.cid
(bootloader) =HTC__405 androidboot.carrier=HTC-ITA androidboot.mid=PB9920
(bootloader) 000 androidboot.keycaps=qwerty androidboot.mode=normal andro
(bootloader) idboot.serialno=HT04KPL02768 androidboot.bootloader=6.93.999
(bootloader) 9 no_console_suspend=1 msmsdcc_sdioirq=1 wire.search_count=5
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) partition number=6
(bootloader) Valid partition num=6
(bootloader) jump_to_kernel: machine_id(2457), tags_addr(0x20000100), ker
(bootloader) nel_addr(0x20008000)
(bootloader) -------------------hboot boot time:10402 msec
FAILED (status read failed (Too many links))
finished. total time: 11.700s

powhatan said:
I don't see connection with my troubles... My phone is bootable, but only with this strange trick (fastboot boot oem)
Devices infos are now these:
SPL/hboot version: 6.93.9999.
Radio version: 4.06.00.02_2.
Main software version: 2.29.405.5.
cid: htc__405.
cpld: none.
product: bravo.
mid: pb9920000.
security: off.
build-mode: ship.
Wi.fi not working, still stuck at 4 triangles black screen and when I unplug it from usb a white screen shows upo with this basically the same things
Alpharev Unlock
Bravo PVT-1 SHIP S-OFF
H-BOOT 6.93.9999
MICROP 031D
TOUCH PANEL SYNT0101
RADIO 4.06.00.02_2
RUU
This is fastboot screen when I boot
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem boot
...
(bootloader) setup_tag addr=0xA0000100 cmdline add=0x8E07F9F0
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:smi ok, size = 0
(bootloader) TAG:hwid 0x0
(bootloader) TAG:skuid 0x21F04
(bootloader) TAG:hero panel = 0x0
(bootloader) TAG:engineerid = 0x0
(bootloader) MCP dual-die
(bootloader) MCP dual-die
(bootloader) TAG:mono-die = 0x0
(bootloader) Device CID is super CID
(bootloader) CID is super CID
(bootloader) Backup CID is HTC__405
(bootloader) setting->cid::HTC__405
(bootloader) serial number: HT04KPL02768
(bootloader) commandline from head: no_console_suspend=1 msmsdcc_sdioirq=
(bootloader) 1 wire.search_count=5
(bootloader) command line length =461
(bootloader) active commandline: board_bravo.disable_uart3=0 board_bravo.
(bootloader) usb_h2w_sw=0 board_bravo.disable_sdcard=0 diag.enabled=0 boa
(bootloader) rd_bravo.debug_uart=0 smisize=0 userdata_sel=0 androidboot.e
(bootloader) mmc=false androidboot.baseband=4.06.00.02_2 androidboot.cid
(bootloader) =HTC__405 androidboot.carrier=HTC-ITA androidboot.mid=PB9920
(bootloader) 000 androidboot.keycaps=qwerty androidboot.mode=normal andro
(bootloader) idboot.serialno=HT04KPL02768 androidboot.bootloader=6.93.999
(bootloader) 9 no_console_suspend=1 msmsdcc_sdioirq=1 wire.search_count=5
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) partition number=6
(bootloader) Valid partition num=6
(bootloader) jump_to_kernel: machine_id(2457), tags_addr(0x20000100), ker
(bootloader) nel_addr(0x20008000)
(bootloader) -------------------hboot boot time:10402 msec
FAILED (status read failed (Too many links))
finished. total time: 11.700s
Click to expand...
Click to collapse
gmaps unresponsive and other gps application don't start correctly...
Seems like a radio problem...
Trying to flash radio to 5.17.05.23
Seems to flash via recovery mode, but when I print device info, still old radio version... I'll try fastboot command...

what results?
http://forum.xda-developers.com/showthread.php?t=687464

trey32 said:
what results?
http://forum.xda-developers.com/showthread.php?t=687464
Click to expand...
Click to collapse
Latest radio link dead, trying from http://www.mofirouz.com/wordpress/2011/03/htc-desire-radios/
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash radio radio.img
sending 'radio' (26112 KB)...
OKAY [ 3.794s]
writing 'radio'...
OKAY [ 31.945s]
finished. total time: 35.746s
In boot phase it vibrated 4/5 times, now is in htc white screen (after fastboot oem boot, which is only way I can boot)

powhatan said:
Latest radio link dead, trying from http://www.mofirouz.com/wordpress/2011/03/htc-desire-radios/
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash radio radio.img
sending 'radio' (26112 KB)...
OKAY [ 3.794s]
writing 'radio'...
OKAY [ 31.945s]
finished. total time: 35.746s
In boot phase it vibrated 4/5 times, now is in htc white screen (after fastboot oem boot, which is only way I can boot)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=43014587&postcount=4919 try this

trey32 said:
http://forum.xda-developers.com/showpost.php?p=43014587&postcount=4919 try this
Click to expand...
Click to collapse
The question is, how long do I have to wait to complete the flashing process? I'm still with white htc logo screen and yet I don't want do a pull battery...

powhatan said:
The question is, how long do I have to wait to complete the flashing process? I'm still with white htc logo screen and yet I don't want do a pull battery...
Click to expand...
Click to collapse
Pull battery done. Radio upgraded
SPL/hboot version: 6.93.9999.
Radio version: 5.17.05.23.
Main software version: 2.29.405.5.
cid: htc__405.
cpld: none.
product: bravo.
mid: pb9920000.
security: off.
build-mode: ship.
-----------------------------------.
still no wi-fi... and GPS not responding

trey32 said:
http://forum.xda-developers.com/showpost.php?p=43014587&postcount=4919 try this
Click to expand...
Click to collapse
What exactly am I supposed to do with this link? Is it a stock rom?
Meanwhile gmaps is vanished and I can't install it, same thing for Ingress app.

powhatan said:
What exactly am I supposed to do with this link? Is it a stock rom?
Meanwhile gmaps is vanished and I can't install it, same thing for Ingress app.
Click to expand...
Click to collapse
Even better! Tried to ruu and now...
S-on, hboot 0.75 and ERROR 140!

powhatan said:
What exactly am I supposed to do with this link? Is it a stock rom?
Meanwhile gmaps is vanished and I can't install it, same thing for Ingress app.
Click to expand...
Click to collapse
yes, it will flash all stock so the phone should boot normal with all its functions....

S-Off on unlocked HTC One M8 without ROM installed

Hi, I have already unlocked my HTC and tested a few ROMs on it, GPE was the last one I had installed and during that install I also set S-ON somehow. Don't ask me how. Maybe I never had S-OFF, but I did install a GPE ROM from this forum on it somehow.
I honestly don't remember the details from then but now I need to restore it back to stock so I can give the phone away to someone who shouldn't have to worry about OTA upgrades not working.
I have TWRP 3.0.0-1 installed, Unlocked bootloader, S-On and no idea of how to proceed. I found links online talking about connecting wires to set S-OFF, is this really necessary? Can it not be done using fastboot and adb?
I tried the correct HTC__Y13 Nandroid backup from this thread here (http://forum.xda-developers.com/showthread.php?t=2701376) but I don't know how to restore it. fastboot flash zip file.zip does not work, in TWRP Install it says the file is corrupt even though md5sum is correct. TWRP Restore doesn't find the zip so I assume it's not for that system.
All these english terms, and guides from 5 years ago are confusing to me, can someone please help me restore my HTC One M8 to factory defaults?
4e03845aeab375746b4553e610047680 /run/media/stemid/EC06-256C/RUU-4.16.401.10-0P6BIMG.zip
https://paste.fedoraproject.org/367177/14634149/ fastboot getvars all output

You need to relock bootloader to install RUU - command fastboot oem lock
What you need : http://forum.xda-developers.com/showpost.php?p=64926362&postcount=4
and here is the latest Marshmallow stock ROM if you want it, or you can use that 4.16.401.10 RUU you already have ... same procedure :
http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6

swehack said:
I found links online talking about connecting wires to set S-OFF, is this really necessary? Can it not be done using fastboot and adb?
Click to expand...
Click to collapse
S-off isn't needed to return to stock, if that is what you are getting at.
But for the record, NO, s-off can not be done by fastboot/adb. You need a working OS to use the sunshine app ($25) which is the only way to s-off.
swehack said:
I tried the correct HTC__Y13 Nandroid backup from this thread here (http://forum.xda-developers.com/showthread.php?t=2701376) but I don't know how to restore it. fastboot flash zip file.zip does not work, in TWRP Install it says the file is corrupt even though md5sum is correct. TWRP Restore doesn't find the zip so I assume it's not for that system.
Click to expand...
Click to collapse
Its not a flashable zip, you have to unzip the contents, then place the extracted folder in the proper location.
It describes in Post #2 of the collection thread (in the Q&A, second Question), how to restore a backup. Although its a bit brief, and ckpv5's thread gives better step-by-step instructions: http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
But the RUU method given by ckpv5 in the last reply, is probably the easier path in your case.

ckpv5 said:
You need to relock bootloader to install RUU - command fastboot oem lock
What you need : http://forum.xda-developers.com/showpost.php?p=64926362&postcount=4
and here is the latest Marshmallow stock ROM if you want it, or you can use that 4.16.401.10 RUU you already have ... same procedure :
http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
Click to expand...
Click to collapse
Ok so now I start with an HTC that is RELOCKED, with TWRP installed. I use TWRP to wipe dalvik, cache, data just in case. Software status is modified.
This is the output of fastboot oem lock.
Code:
(bootloader) [PGFS] partition_update_pgfs: pg1fs_security
(bootloader) TZ_HTC_SVC_ENC ret = 0
(bootloader) [PGFS] partition_update_pgfs: pg2fs_sec_recovery
(bootloader) Lock successfully...
(bootloader) deinit_lcd
(bootloader) mipi display off
(bootloader) mdp_clock_off
(bootloader) turn off fd8c2308 failed 1 times. Try again...
(bootloader) disable_mmss_clk done
(bootloader) pll1_disable done
(bootloader) TZ_HTC_SVC_DISABLE ret = -1610744452 (0x9FFDFD7C)
(bootloader) [CRITICAL] SPMI write command failure: cmd_id = 0, error
(bootloader) = 4
(bootloader) [CRITICAL] SPMI write command failure: cmd_id = 0, error
(bootloader) = 4
(bootloader) [ERR] Cannot halt SPMI arbiter!!
(bootloader) [INFO] Rebooting device
Disable hiding known file extensions in Explorer.exe.
Verify checksum of RUU.zip (469c3b8504ce2a2c8aae0fde17bfe028) and htc_fastboot.exe (7343c5bcec64373f83d69bd074954759) with fciv -md5.
Boot into fastboot.
Check fastboot devices.
Run fastboot oem rebootRUU so it reboots into the silver HTC logo screen
Run htc_fastboot.exe flash zip RUU.zip
Output from htc_fastboot.exe is at first.
Code:
sending 'zip'... (53965 KB) OKAY
sending time = 2.627 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) start image[hboot] flushing...
(bootloader) [RUU]WP,hboot,99
(bootloader) ...... Successful
(bootloader) current_image_number=2
(bootloader) current_image_number=5
(bootloader) current_image_number=7
FAILED (status malformed (0 bytes))
Execution time is 14(s)
I try again and get a longer run.
Code:
sending 'zip'... (53965 KB) OKAY
sending time = 2.625 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) [RUU]UZ,rpm,0
(bootloader) signature checking...
(bootloader) current_image_number=2
(bootloader) [RUU]UZ,adsp,10
(bootloader) [RUU]UZ,adsp,33
(bootloader) [RUU]UZ,adsp,54
(bootloader) [RUU]UZ,adsp,76
(bootloader) [RUU]UZ,adsp,98
(bootloader) [RUU]WP,adsp,0
(bootloader) ...... Successful
(bootloader) start image[pg2fs_spcustom] unzipping & flushing...
(bootloader) [RUU]UZ,pg2fs_spcustom,38
(bootloader) [RUU]UZ,pg2fs_spcustom,100
(bootloader) current_image_number=4
(bootloader) [RUU]UZ,wcnss,22
(bootloader) [RUU]UZ,wcnss,68
(bootloader) [RUU]UZ,wcnss,100
(bootloader) [RUU]WP,wcnss,100
(bootloader) current_image_number=5
(bootloader) [RUU]UZ,tp,100
(bootloader) current_image_number=6
(bootloader) [RUU]UZ,tp,100
(bootloader) current_image_number=7
(bootloader) [RUU]UZ,sensor_hub,100
(bootloader) [RUU]WP,sensor_hub,12
(bootloader) [RUU]WP,sensor_hub,68
(bootloader) [RUU]WP,sensor_hub,92
(bootloader) verified fail
(bootloader) current_image_number=10
(bootloader) ...... Successful
(bootloader) start image[sbl1] unzipping & flushing...
(bootloader) verified fail
(bootloader) current_image_number=12
(bootloader) current_image_number=13
(bootloader) current_image_number=14
(bootloader) ...... Successful
(bootloader) start image[rcdata] unzipping & flushing...
(bootloader) current_image_number=16
OKAY
sending 'zip'... (549729 KB) OKAY
sending time = 17.657 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) checking main version...
(bootloader) checking hboot version...
(bootloader) total_image_number=1
(bootloader) start image[system] unzipping & flushing...
(bootloader) [RUU]UZ,system,0
(bootloader) [RUU]UZ,system,8
(bootloader) [RUU]UZ,system,16
(bootloader) [RUU]UZ,system,24
(bootloader) [RUU]UZ,system,32
(bootloader) [RUU]UZ,system,40
(bootloader) [RUU]UZ,system,48
(bootloader) [RUU]UZ,system,56
(bootloader) [RUU]UZ,system,64
(bootloader) [RUU]UZ,system,72
(bootloader) [RUU]UZ,system,80
(bootloader) [RUU]UZ,system,88
(bootloader) [RUU]UZ,system,96
(bootloader) [RUU]UZ,system,100
(bootloader) [RUU]WP,system,0
(bootloader) [RUU]WP,system,8
(bootloader) [RUU]WP,system,16
(bootloader) [RUU]WP,system,24
(bootloader) [RUU]WP,system,32
(bootloader) [RUU]WP,system,40
(bootloader) [RUU]WP,system,48
(bootloader) [RUU]WP,system,56
(bootloader) [RUU]WP,system,64
(bootloader) [RUU]WP,system,72
(bootloader) [RUU]WP,system,80
(bootloader) [RUU]WP,system,88
(bootloader) [RUU]WP,system,96
(bootloader) [RUU]WP,system,100
(bootloader) ...... Successful
(bootloader) current_image_number=0
After that it just hangs and nothing happens, on the HTC screen I see the silver logo with a full green progress bar under it.
The first time I came here I tried to issue fastboot reboot in another terminal but that gave me the following text from htc_fastboot.
Code:
FAILED (status malformed (0 bytes))
Execution time is 261(s)
So this time I'm just waiting to see if anything else happens, only a few minutes so far.

It looks weird the size of RUU you flashed is 53965 KB
Are you sure you tried to install the correct one in your folder ?
Make sure you have one zip only. I've seen people trying to flash RUU but instead flashing unsigned firmware.
You also can try flashing with microSD method.

ckpv5 said:
It looks weird the size of RUU you flashed is 53965 KB
Are you sure you tried to install the correct one in your folder ?
Make sure you have one zip only. I've seen people trying to flash RUU but instead flashing unsigned firmware.
You also can try flashing with microSD method.
Click to expand...
Click to collapse
It eventually worked, the sizes were correct but htc_flashboot.exe went through several iterations of "sending 'zip'... (some size KB) OKAY" before it finally exited with this.
Code:
Flash Zip Complete
Execution time is 358(s)
I had a Fedora laptop with Windows in a VM before but I tried it at home with my desktop Windows system, natively, and then it worked much better. I think the USB connection between the VM and the host is unreliable.

Yeah.. I notice that too because today I did fastboot flash rom.zip
Great that you solved your problem

Develop Bugs

welcome