Hi
I have been testing a new kernel I built. It is based on the CM kernel, and I have tweaked it with some of the voltage mods and OC settings from the wind kernel. For good measure I added a couple of governors in as well. Oh and i updated the kernel to 3.0.91
Changes
lulzactive governor and smartass2 added: there is a playstore app for tuning the lulzactive http://tegrak2x.blogspot.ca/2011/11/lulzactive-governor-v2.html
Update to linux 3.0.91
OC and voltage tweaks from wind kernel
Personal experience
lulzactive governer seems to work great for me.
My phone maxed out at 1782 MHZ, this has been very stable for me (at 1836MHZ my phone had random reboots).
Antutu benchmark 10,131 (With straight CM benchmarks was 9.376)
Installation: reboot into recovery install zip. To revert flash ROM.
NOTE THIS WILL ONLY WORK WITH A CM-11 ROM. Pac rom needs a different boot image built.
Also note this is only built for a p930, I do not have the other models to test this rom against
USE AT YOUR OWN RISK
I take no responsibilities for any damages
Download: http://www.androidfilehost.com/?fid=23329332407580098
Nz
P.s.
I have seen a BSOD, (it is rare) upon investigation the only weird thing I found was that "ps" listed a dozen processes but does not return. Every other command seemed to work fine. I have not found anyone that can explain what that means or how to troubleshoot this further.
Source : https://github.com/notzippy/lge-kernel-iproj/tree/nz-11.0
Nz
request
if u can please enable a GPU overclock, im gamer and youtuber if doesnt have GPU overclock i cant play games without lags and do screencasts, a overclock to 320 or 350 mhz it perfect! gpu overclock doesnt need only for my but for any gamer that play MC4, nova 3 and onther high games...
Thank you for your efforts!
I think what is missing from the current CM11 builds is a newer kernel...
I know it is much work, but do you have any plans to update to ION or even a 3.4 version?
_crAss_ said:
Thank you for your efforts!
I think what is missing from the current CM11 builds is a newer kernel...
I know it is much work, but do you have any plans to update to ION or even a 3.4 version?
Click to expand...
Click to collapse
What does this mean?
As I understand all of our kernels have been based on a gingerbread kernel!? Could someone inform us on what this really means?
P.s. Thanks for the kernel btw! Can't wait to try it. I tried CM11 before and was getting tons of BSOD/reboots, which may have been due to incorrect voltages. I've been stable for days on CM10.1.3 after I applied the correct stock voltages. Wind kernel seems to set a strange voltage curve.
pmaioli said:
if u can please enable a GPU overclock, im gamer and youtuber if doesnt have GPU overclock i cant play games without lags and do screencasts, a overclock to 320 or 350 mhz it perfect! gpu overclock doesnt need only for my but for any gamer that play MC4, nova 3 and onther high games...
Click to expand...
Click to collapse
I can look at applying the badass oc that hono did, it appears to have a gpu oc setting.
https://github.com/HONO/CM10_Kernel/commit/359e59877b3bf3227cdd5cd853ba994c984e4e6c
Flyview said:
What does this mean?
As I understand all of our kernels have been based on a gingerbread kernel!? Could someone inform us on what this really means?
P.s. Thanks for the kernel btw! Can't wait to try it. I tried CM11 before and was getting tons of BSOD/reboots, which may have been due to incorrect voltages. I've been stable for days on CM10.1.3 after I applied the correct stock voltages. Wind kernel seems to set a strange voltage curve.
Click to expand...
Click to collapse
All CM releases are based on the opensource code released by LG for the p930. The kernel has been patched in various ways to make it compatible with kitkat. The android open source kernel project does makes it difficult to update the actual kernel so it remains at release 3.0.31.
_crAss_ said:
Thank you for your efforts!
I think what is missing from the current CM11 builds is a newer kernel...
I know it is much work, but do you have any plans to update to ION or even a 3.4 version?
Click to expand...
Click to collapse
Looking at upgrading 3.4 kernel from miroslav sphinx kernel https://github.com/JellyBeanNitro/kernel-iproj-3.4/ to make it compatible. Cannot use the patch sets from iproj since they are for a 3.0.31 kernel so I am using the patches from android_kernel_google_msm to update the 3.4 kernel to be compatible. Have it compiling but I am getting an error booting. MDP: unknown ioctl (cmd=c06c6d94) received!
notzippy said:
I can look at applying the badass oc that hono did, it appears to have a gpu oc setting.
https://github.com/HONO/CM10_Kernel/commit/359e59877b3bf3227cdd5cd853ba994c984e4e6c
Click to expand...
Click to collapse
ooh, very good, if u can this go save my life, 200, 228, 266, 300 and 320 mhz in GPU... very good!
Flyview said:
What does this mean?
As I understand all of our kernels have been based on a gingerbread kernel!? Could someone inform us on what this really means?
P.s. Thanks for the kernel btw! Can't wait to try it. I tried CM11 before and was getting tons of BSOD/reboots, which may have been due to incorrect voltages. I've been stable for days on CM10.1.3 after I applied the correct stock voltages. Wind kernel seems to set a strange voltage curve.
Click to expand...
Click to collapse
For more information about ION Memory manager check the link below:
http://android-revolution-hd.blogspot.gr/2013/08/the-android-ion-memory-manager.html
As far as I know the kernel we now have is not ION.
For some other devices, developers were able to make new kernels based on this new memory manager. From what I understand - and I am no expert - this solves lots of issues with newer drivers etc. In the other device I had, all the camera issues were gone after the kernel was updated to support ION. Then it was much easier to upgrade it to 3.4.
With such a kernel I guess it will be much easier to have future versions of android for our devices, since generic drivers can be used for all the components of our phone and of course run kitkat flawlessly.
---------- Post added at 03:00 PM ---------- Previous post was at 02:45 PM ----------
I have installed your kernel and so far so good.
Since you mention overclocking in your first post, could you post a table with frequencies and relative voltage that your device at least seems to be coping fine?
How would you characterize lulzactive governor's battery performance?
_crAss_ said:
For more information about ION Memory manager check the link below:
http://android-revolution-hd.blogspot.gr/2013/08/the-android-ion-memory-manager.html
As far as I know the kernel we now have is not ION.
For some other devices, developers were able to make new kernels based on this new memory manager. From what I understand - and I am no expert - this solves lots of issues with newer drivers etc. In the other device I had, all the camera issues were gone after the kernel was updated to support ION. Then it was much easier to upgrade it to 3.4.
With such a kernel I guess it will be much easier to have future versions of android for our devices, since generic drivers can be used for all the components of our phone and of course run kitkat flawlessly.
---------- Post added at 03:00 PM ---------- Previous post was at 02:45 PM ----------
I have installed your kernel and so far so good.
Since you mention overclocking in your first post, could you post a table with frequencies and relative voltage that your device at least seems to be coping fine?
How would you characterize lulzactive governor's battery performance?
Click to expand...
Click to collapse
Oh wow, yea that sounds like it would fix a lot of our problems.
Sent from my LG-P930 using Tapatalk
_crAss_ said:
For more information about ION Memory manager check the link below:
http://android-revolution-hd.blogspot.gr/2013/08/the-android-ion-memory-manager.html
As far as I know the kernel we now have is not ION.
For some other devices, developers were able to make new kernels based on this new memory manager. From what I understand - and I am no expert - this solves lots of issues with newer drivers etc. In the other device I had, all the camera issues were gone after the kernel was updated to support ION. Then it was much easier to upgrade it to 3.4.
With such a kernel I guess it will be much easier to have future versions of android for our devices, since generic drivers can be used for all the components of our phone and of course run kitkat flawlessly.
---------- Post added at 03:00 PM ---------- Previous post was at 02:45 PM ----------
I have installed your kernel and so far so good.
Since you mention overclocking in your first post, could you post a table with frequencies and relative voltage that your device at least seems to be coping fine?
How would you characterize lulzactive governor's battery performance?
Click to expand...
Click to collapse
With lulzactive governor I am getting around 20-24 hour rom usage provided no BSOD. I will work on a voltage chart. I built a kernel with HONO's voltage and OC tweaks. I also added the 3 governors he had in his as well. Personally I really like the current ROM and my phone wont go above the 1786, but maybe someone elses phone can reach the 1924 ..
However if miroslav_mm posts his 3.4 kernel source I will likely be distracted by for a while -
Nz
I am stable at 1836...I have run multiple times AnTuTu and 3Dmark and it hasn't frozen a single time.
I really hope though that you get distracted with miroslav_mm's kernel. Maybe you could work together and find a workaround for the camera...
Can you build this kernel for SU640, please?
Thank you
So do I flash CM 11 then this. I'm using philz touch.
xxAirwickxx said:
So do I flash CM 11 then this. I'm using philz touch.
Click to expand...
Click to collapse
Yes, flash cm11 first
I tried through philztouch n didn't accept. It aborted. I'm currently running newest nightly for CM 11 04/25. Haven't tried it yet on this. Get the error 7 when trying to flash
just want to know if there is any update...
I am using CM11 Aug 10 built + Gapps 20140606 built, after flashing this kernel, some apps installed would be disappeared (e.g. Plus, Hangout, Book, Titanium Backup, Firefox, ...)... For Plus, Hangout, Book, these should be in gapps already, dunno where have they gone.
For the others, I could simply reinstall the apps.
Is it compatibility problem of the kernel?
Am I need factory reset after flashing the kernel?
pekkle_hksar said:
just want to know if there is any update...
I am using CM11 Aug 10 built + Gapps 20140606 built, after flashing this kernel, some apps installed would be disappeared (e.g. Plus, Hangout, Book, Titanium Backup, Firefox, ...)... For Plus, Hangout, Book, these should be in gapps already, dunno where have they gone.
For the others, I could simply reinstall the apps.
Is it compatibility problem of the kernel?
Am I need factory reset after flashing the kernel?
Click to expand...
Click to collapse
Been working with 3.4 kernel of miroslav lately, nothing new ...
Nz
Related
First is an O/C kernel that I built from the HTC source. This kernel is stable and with the right profiles setup in setCPU has given me very good battery life. I'm giving coolbho3000 credit here as his post in the G2 forums is what helped me to do this. I am also acknowledging gr8gorilla who helped me several times through this process. Second is a kernel built from the latest CM kernel zource from zinx. It has proven to be very stable (after tweaking the voltages).
Now for the boring part ... If you choose to flash this you do it at your own risk. I am in no way, shape, or form responsible if you flash this and your phone turns into a paperweight. Once again, flash this at your own risk.
There, now that that is out of the way we can get on to the good stuff.
Make sure you choose the right kernel. The stock kernel will break your CM install if you flash it.
Kernels for Stock and Stock based roms
Kernel 2.6.32.21grankin010OC0v0.05
http://t1mgmaps.com/file.php?id=24
Md5Sum: 72c3430177eeefc6ff4b2c658efa0949
Features:
adb root enabled by default
system set r/w at boot (no need to remount)
voltages tweaked
cacheflush hack from zodttd integrated
noatime for better FS performance
Kernel 2.6.32.21grankin01-OC-v0.04
http://t1mgmaps.com/file.php?id=20
Md5Sum: a8668bdb2c1c7ca6ef0d9fbdafbe6969
Features(+v0.03):
Same features as v03 but with different voltages
Kernel 2.6.32.21grankin-OC-v0.03
http://t1mgmaps.com/file.php?id=19
Md5Sum: a82111399a9a4d570def14dce563a073
Features(+v0.01):
Voltages tweaked - Hopefully this one is more stable for you guys.
Kernel 2.6.32.21grankin01-OC-v0.02
http://www.mediafire.com/?o216o3b6jea13f9
Md5Sum: 2fdcde29532339743f0c41daae32db7f
Features(+v0.01):
O/C'd to 1.8Ghz with several intermediate clock speeds
Voltages for 1.7Ghz have been turned up a little bit to address stability concerns
Kernel 2.6.32.21grankin01-OC-v0.01
http://www.mediafire.com/?bqbdgb38m15n789
Md5Sum: af73907d0f9d8fbc1b5dcc41ea6b9552
Features:
Ext4 support (if you want to play with it)
O/C'd to 1.7Ghz with several intermediate clock speeds
ADB has root privileges automatically
System is set R/W on boot (no need to mount anymore)
HTC Perflock is disabled (pre-requisite for over-clocking)
CPU Governors:
Performance
Conservative
OnDemand
UserSpace
PowerSave
Kernels for CyanogenMod and MIUI
Do not use these with CM7-GB. They will not boot properly.
Kernel_grankin01-CM-OC-v0.10
http://t1mgmaps.com/file.php?id=26
Md5Sum: 6c4f5b18ca5509cc83cf5eac0667b3e0
Features:
Same as v09 but video works
Kernel_grankin01-CM-OC-v0.09
http://t1mgmaps.com/file.php?id=25
Md5Sum: 63bcc734bf33cb30eb0dd335f807bf10
Features(+v0.08):
Wifi is fixed in this release
Kernel 2.6.32.27grankin01-CM-OC-v0.08
http://www.mediafire.com/?4hs3ix1b8rdmz36
Md5Sum: 7822eb4dcf547d712c455c72c83d4118
Features:
Noatime for better FS performance
Cacheflush hack by zodttd is integrated
Voltages have been tweaked (again )
Inludes all the standard features also
Kernel 2.6.32.27grankin01-CM-OC-v0.07
http://t1mgmaps.com/file.php?id=18
Md5Sum: 9273d9405e6bdb76f754c96916e36262
Features(+0.06):
System Permanent R/W Fix (edited code in v06 and left that out ... oops)
Video is fixed
Voltages changed (hopefully for better battery life)
Kernel 2.6.32.27grankin01-CM-OC-v0.06
http://t1mgmaps.com/file.php?id=17
Md5Sum: 55f04250126b6763db2f180b2829e4ac
Features(+0.05):
Newest Bluetooth fixes
Newest Video fixes - broken/missing code
System Permanent R/W - Broken (edited code and left that out ... oops)
Kernel 2.6.32.27grankin01-CM-OC-v0.05
http://t1mgmaps.com/file.php?id=16
Md5Sum: 026e5717311fa42da073ac8a9fc442d5
Features(+0.03):
Bluetooth fix
Charge issue fix
Kernel 2.6.32.27grankin01-CM-OC-v0.03
http://www.mediafire.com/?3g6yv8g9ypsu953
Md5Sum: 0424f5565387f86818c1e67ff636443e
Features(+v0.02):
New version of kernel includes fix for video
Kernel 2.6.32.27grankin01-CM-OC-v0.02
http://www.mediafire.com/?jsux5wtj7mgcvzo
Md5Sum: 8c243df7f53143a6a3be5292073f052b
Features:
Ext4 support (if you want to play with it)
O/C'd to 1.8Ghz with several intermediate clock speeds
ADB has root privileges automatically
System is set R/W on boot (no need to mount anymore)FIXED
HTC Perflock is disabled (pre-requisite for over-clocking)
CPU Governors:
Performance
Conservative
OnDemand
UserSpace
PowerSave
Interactive
CM7-Gingerbread Kernels
Do not use these with CM6-Froyo! They have different ramdisks and wifi options built in.
These kernels have no issue with video. If you are having trouble with youtube and such update your GB rom to one of the newest. There was a memory leak in the source for the rom itself that zinx has fixed. Thirty to Forty-Five minutes of straight youtube action and I had no problem at all.
Kernel_2.6.32.27grankin01-CM-GB-OC-v0.09
http://t1mgmaps.com/file.php?id=29
Md5Sum: 7565340ac31ff7560d45ab42e043acc0
Features(+v0.08):
Changed voltages a tad
I get great battery life with light to moderate usage on this kernel
Kernel 2.6.32.27grankin01-CM-OC-v0.08-GB
http://t1mgmaps.com/file.php?id=22
Md5Sum: b7b5fde8db99a01d827c3b7fc81a387e
Features:
Noatime for better FS performance
Cacheflush hack by zodttd is integrated
Ext4 support (if you want to play with it)
O/C'd to 1.8Ghz with several intermediate clock speeds
ADB has root privileges automatically
System is set R/W on boot (no need to mount anymore)
HTC Perflock is disabled (pre-requisite for over-clocking)
CPU Governors:
Performance
Conservative
OnDemand
UserSpace
PowerSave
Interactive
I have packaged this into an update.zip format that you can flash through your custom recovery. Simply choose to install a zip from the sdcard and pick the update package to install it. It will install the wifi driver at the same time so you don't need to worry about that. Everything works with this kernel so far for me if you have any problems please post them and I'll see what I can do to fix them.
Remember that you hardware is not the same as your neighbor's so while he may be able to max the settings out and run stable your device may need to be set to a lower clock speed to run stable.
Source code for both kernels has been added to github. If you want to play around with them download source from here: https://github.com/grankin01
Happy Modding/Devving!
wow, thank you sir
I was just about to start testing kernels with Zinx's CM6 anyway. Looks like yours is first.
hmmm... could not run update.zip through clockworkmod. I was looking to extract the files and push them manually, however, I don't see a zImage file to push.
No luck with the miui rom. Cant get past the splash screen.
Sent from my HTC Glacier using XDA App
monnietron said:
No luck with the miui rom. Cant get past the splash screen.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Yeah, its based off of CM. I'm working on one built fromthe CM source right now.
Christopher3712 said:
I was just about to start testing kernels with Zinx's CM6 anyway. Looks like yours is first.
hmmm... could not run update.zip through clockworkmod. I was looking to extract the files and push them manually, however, I don't see a zImage file to push.
Click to expand...
Click to collapse
There isn't a zimage. I wrapped it all up in its own boot.img and then packaged it in the update.zip with the wifi module.
Does this break the nightly CM ROM? I know gorilla's kernel does.
I appreciate your work!
TmobileDash12 said:
Does this break the nightly CM ROM? I know gorilla's kernel does.
I appreciate your work!
Click to expand...
Click to collapse
Yes, it breaks it horribly. I'm working on it now.
grankin01 said:
Here is an O/C kernel that I built from the HTC source. This kernel is stable and with the right profiles setup in setCPU has given me very good battery life. I'm giving coolbho3000 credit here as his post in the G2 forums is what helped me to do this. I am also acknowledging gr8gorilla who helped me several times through this process.
Click to expand...
Click to collapse
Thanks for this grankin01. Great work to you and the others involved.
So no miui or cm6 on this kernel correct I just dont wanna break anything.
Sent from my icey cold glacier 4g freezing every phone in its path.
jriv said:
So no miui or cm6 on this kernel correct I just dont wanna break anything.
Sent from my icey cold glacier 4g freezing every phone in its path.
Click to expand...
Click to collapse
Not yet. It will work with the rom that you have installed right now though.
hey guys. im a noob to android. every other phone i have had has been winmo. i wanted to try this oc kernel because it seems easier to install than the gorilla one. however i ran into a problem when installing. i have a stock rom 2.2.1, perm rooted s=off, using clockwork recovery. i backed up my rom and flashed via rom manager. it then began to send me into a boot loop never getting past the first screen. just kept turning off and rebooting. soooooo i rebooted directly into clockwork and tried to do it from there and the same thing happened. so i restored my recovery and now everything is back to normal. can anyone point me in the right direction? i did notice that in clockwork it gave me two options to flash the kernel or to flash an update from the sd card. should i have flashed the update zip instead of the kernel or flash both.. sorry im a partial noob. i know how to use adb a lil and the emulator, this is the first thing i flashed on my phone and nearly had a heart attack from thinking i was bricked! any help is appreciated
Do you already have setCPU installed? Not everyone's phone will be able to reach the maximum speed without bootlooping or locking up. Just the nature of the beast. Try setting your speed down in setCPU (if you already have it installed) and turn set at boot off and then flashing and rebooting. Then you can test the speeds one by one to know what is working for you.
Edit: New kernel for CM and MIUI is nearly ready. 1.8Ghz with over 3200 on quadrant!!!
grankin01 said:
Not yet. It will work with the rom that you have installed right now though.
Click to expand...
Click to collapse
Oh I'm running miui now just haven't changed my sig lol
Sent from my icey cold glacier 4g freezing every phone in its path.
Can't wait for your kernel for CM! I wanna see my phone unleash its true power! Lol thanks dude.
Sent from my HTC Glacier using XDA App
grankin01 said:
Do you already have setCPU installed? Not everyone's phone will be able to reach the maximum speed without bootlooping or locking up. Just the nature of the beast. Try setting your speed down in setCPU (if you already have it installed) and turn set at boot off and then flashing and rebooting. Then you can test the speeds one by one to know what is working for you.
Edit: New kernel for CM and MIUI is nearly ready. 1.8Ghz with over 3200 on quadrant!!!
Click to expand...
Click to collapse
thanks.... stupid me... duuhhh.... i have setcpu installed already and it is set at "set on boot".... thanks for the help man... will give it a go and let you know how that works out!
Edit: turning off set on boot in setcpu didnt work. still boot looped. i will try uninstalling setcpu, then flashing, then reinstalling. i dont get it though because my highest on setcpu is the stock 1024.... hmm maybe its the profiles i have set up... either way, gonna give it another go in a few. im gonna get this working today if its the last thing i do. so thankful for backups to restore lol
grankin01 said:
Do you already have setCPU installed? Not everyone's phone will be able to reach the maximum speed without bootlooping or locking up. Just the nature of the beast. Try setting your speed down in setCPU (if you already have it installed) and turn set at boot off and then flashing and rebooting. Then you can test the speeds one by one to know what is working for you.
Edit: New kernel for CM and MIUI is nearly ready. 1.8Ghz with over 3200 on quadrant!!!
Click to expand...
Click to collapse
That's...retarded. I can't wait to see how that handles. lol! Are you incorporating U/V's on the lower frequencies as well?
UV / OC?
Is this a UV / OC kernel? Thanks for the help.
Christopher3712 said:
That's...retarded. I can't wait to see how that handles. lol! Are you incorporating U/V's on the lower frequencies as well?
Click to expand...
Click to collapse
Yes, and O/V's in the higher frequecies for stability. This one was picky.
InvisibleHero said:
Is this a UV / OC kernel? Thanks for the help.
Click to expand...
Click to collapse
Only in the lower frequencies. The higher frequencies weren't stable running lower voltages.
Thanks OP. When you say the lower ranges, at which MHz did you not UV? Just curious. I am thinking of not OC'ing more than 1.4MHz and didnt know if I would get the UV benefit.
*EDIT* Meant GHz
Presenting, my HD2 NAND Android kernel!
Summary
To provide, stable, fast and up to date kernels for our HD2s running either DFT or CWM nand android
Features
- 1190, 1190 Undervolt auto scaling versions available. listed is kernel MAX speed, it will scale to anything less depending on demand and ROM installed. Default max seepd is 998 without the use of an overclocking app
- Faster IO tweak taken from hastarins kernel tree
- Latest YAFFS driver
- Always built from latest source tree
- Very responsive kernel configuration
- Battery efficient
- Supports EXT 2 / 3 / 4, depending our your chosen ROM
- RMNET / PPP both supported, depending on your chosen ROM
- Bluetooth, WiFi, LED notifications all working correctly
- Smartass (default), Interactive and all standard CPU governors supported
- CIFS supported
- MAX defualt speed is 998, use setCPU or similar to overclock if you so wish
- cLK supported
- Automatic Extended Battery Support
Choosing your kernel
1190Mhz
This should work perfectly on nearly every HD2. It offers good speed at a slight cost to battery life. It will, depending on how your chosen ROM implements it, scale anywhere between 245-1190 Mhz depending on load
1190Mhz Undervolt
Same performance as 1190Mhz above, but with lower CPU voltage settings. It will work perfectly on most phones, but not all. If you experience FCs or random reboots then chose one of the aforementioned versions. This kernel offers significant battery life improvements if it works for you.
About the source and GPL compliance
The kernel is built direct from main GIT. You can access the commit logs and sources here on gitorious
The changes and modifications as mentioned in the changelog, and my build .config are all in my separate patch file, which you can download here
Download
All the kernels are supplied on one zip package. Contained within the package are the 2 kernel zImages and the associated modules. Chefs and advanced users will know what to do with these.
Download v11 (files only) --> http://htcfanboys.com/CleanEx/Kernel/DISTRIBUTION KERNELv11.zip
Download CWM ZIPs FOR NON TYPHOON ROMS (*series A*)
http://forum.xda-developers.com/showpost.php?p=11968195&postcount=408
Download CWM ZIPs FOR TYPHOON ROMS / ROMS SHIPPED WITH TYTUNG v6 (*series B*)
these include the wpa_supplicant fix for Wifi / bootlooping
http://forum.xda-developers.com/showpost.php?p=11974837&postcount=471
(the RAM named ones are for typhoon ram build)
Flash under cwm.
Wipe Cache and Dalvik Cache.
~~~~IMPORTANT~~~~
If you are not sure you need the WiFi patch, flash the *series A* kernel. If you find your phone bootlooping / wifi crashing, flash the *series B* kernels
As a backup, the wifi patch remains attached to this post
Changelogs
v11
- Pulled new updates from GIT
- Automatic Extended Battery support
- cLK patches and support built in
- some cleanups
- config changes, more responsive (quadrant wont improve thats IO bound)
v10
- Bug fixes, WiFi should work for everyone without the patch
- Imported the i2c, gsensor, GPU decoupling driver patches to new build tree
- Removed all debugging from kernel (99.9% people dont need it)
- Some build config changes, little more responsive
v9
- Fixed WiFi driver for non GB builds
- Fixed default CPU speed @ 998 max
- Fixed crashes / bootloops / random reboots
v8
- Switch to main branch, import speed mods from previous version
- Fix WiFi for GB / non-GB builds
- config changes for better response times
v7
- Switched to tytungs branch
- Swapped tytungs GB only WiFi driver for main one from primary GIT
- Added CIFS support
- Removed 998 / 1536 speeds
- 1190 Normal is not undervolted and will work for everyone
- 1190 uv is undervolted and might not work for everyone
- Reverted to SLAB, should fix bootlooping
- Other minor config changes
v6
-First public release
Disclaimer
I am not responsible for any damage, loss of data or earnings resulting from the use of my kernels. Users who wish to use an overclock kernel do so on the understanding that running any device outside its normal operating parameters may have damaging consequences
Credits:
Cotulla, Bepe, Hastarin, Tytung, Rafpigna, Markinus and all other kernel source contributors as mentioned on the GIT Commit logs.
Fadzy, JoPlayer, Dave and Jan-Willem for their never ending support, friendship, help and good laughs.
First! This is in a kleandroid 2.55?
yes....and no
its just been recompiled, and i added pure 998mhz for people who have phones that cant take the faster speeds!
Awesome! This is the best kernel, have been using it for like three days and it gives me the best battery life and performance. I loved it. I'll pack this one into cwm zip when I get home and flash it.
Edit: how much does battery life actually improve with the uv one? Now I'm torn between the uv and oc to 1.5ghz. Battery or performance?
Sent from my HD2 running Android on NAND
Can anyone test this on sergio's coredroid 1.4 and post results? I would but dont have my computer for a couple days.
g.lewarne
Please add 998Mhz kernel to next update CleanDroid!
Derek0228 said:
Awesome! This is the best kernel, have been using it for like three days and it gives me the best battery life and performance. I loved it. I'll pack this one into cwm zip when I get home and flash it.
Edit: how much does battery life actually improve with the uv one? Now I'm torn between the uv and oc to 1.5ghz. Battery or performance?
Sent from my HD2 running Android on NAND
Click to expand...
Click to collapse
you might get maybe possible 15% more battery time out of the UV kernel. in ideal circumstances in a perfect world of course
CWM
How to use that? :-(
Any zip to use on cwr?
felipemadox said:
How to use that? :-(
Any zip to use on cwr?
Click to expand...
Click to collapse
Not yet, it is still underway.
I made some cwm zips, before going to sleep. I wasn't able to test them because it's late, but they should work. If g.lewarne wants to post them in the OP, i have no problem. Inside the zip, after you download, there are 4 more zips, one for 998, 1190, 1536(this one doesn't work for me) and 1190 UV. Just flash the one you like and enjoy!
http://www.multiupload.com/DPR3F7TW7J
http://www.mediafire.com/?sqg55hze9evgchb
If you find this useful donate me a click on my thanks button.
Thanks derek.
g.lewarne said:
Thanks derek.
Click to expand...
Click to collapse
Once tested, please update, i will test a rom on it.
raviluke said:
Once tested, please update, i will test a rom on it.
Click to expand...
Click to collapse
I can't test anything now as im off to bed . Its 2am and I did a 14 hour day. Yawn!
report
Derek0228 said:
I made some cwm zips, before going to sleep. I wasn't able to test them because it's late, but they should work. If g.lewarne wants to post them in the OP, i have no problem. Inside the zip, after you download, there are 4 more zips, one for 998, 1190, 1536 and 1190 UV. Just flash the one you like and enjoy!
Please give feedback, again I say, they should work but haven't tested them. I've made all his previous kernel versions cwm zip, and flashed them successfully.
http://www.multiupload.com/DPR3F7TW7J
http://www.mediafire.com/?sqg55hze9evgchb
Click to expand...
Click to collapse
Thank you!
1190Mhz Undervolt its working here.
1536 does not work for ne! Causes random reboot on boot. If you want to test it, do so, but i'm pretty sure it's a problem with the kernel, not with the zip, because the one g.lewarne uses on his rom had 1536 and caused random reboots too, cant be a coincidence . Also, youre welcome!
I flashed the 1190 to test, now off to flash the UV one!
Sent from my HD2 running Android on NAND
raviluke said:
Once tested, please update, i will test a rom on it.
Click to expand...
Click to collapse
It works, but not the 1536 one, or at least not for me.
Sent from my HD2 running Android on NAND
Might I just point out that in real world situations the 1190 kernels are just as fast. 1536 is really just a gimmick but some people want it so there you to. Myself, I run my own personal 1305
Sorry for spamming this thread, but I must ask, is uv dangerous? If so, what are some steps I have to follow to prevent my phone from getting fu'd? Like for example,i know that for the 1536, we shouldn't have it always o/c'd to the 1.5ghz.
Sent from my HD2 running Android on NAND
Derek0228 said:
Sorry for spamming this thread, but I must ask, is uv dangerous? If so, what are some steps I have to follow to prevent my phone from getting fu'd? Like for example,i know that for the 1536, we shouldn't have it always o/c'd to the 1.5ghz.
Sent from my HD2 running Android on NAND
Click to expand...
Click to collapse
Uv Isn't dangerous in the same way, the only problem is possible crash, cpu is safe
Derek0228 said:
I made some cwm zips, before going to sleep. I wasn't able to test them because it's late, but they should work. If g.lewarne wants to post them in the OP, i have no problem. Inside the zip, after you download, there are 4 more zips, one for 998, 1190, 1536(this one doesn't work for me) and 1190 UV. Just flash the one you like and enjoy!
http://www.multiupload.com/DPR3F7TW7J
http://www.mediafire.com/?sqg55hze9evgchb
If you find this useful donate me a click on my thanks button.
Click to expand...
Click to collapse
Installed the UV Kernel on Coredroid v1.4 TMOUS ver its getting stuck at GO GO GO
Hi everybody. First of all I'm not developer. I just compile the latest 3.0.50 Virtuous Kernel with smartassV2 and lazy governors for myself but I decide to share it. I was really surprised when I saw only vanilla governors without the new modern and fancy smartass, lagfree, interactivex etc. On my old G1 smartassV2 give really good improve.
If someone doesnt know what are the governors in kernel - please read here.
If somebody wants to test it I will appreciate a lot some feedback. If the result from test isn't so satisfying I will pimp a bit the governor for more battery friendly settings.
My final idea is to pull the kernel with more from the good governors lagree, interactiveX and maybe Intellidemand and then to make pull request. I'm open for feedback and suggestions before commiting the changes.
Install:
Download kernel_with_governors.zip for sense roms and place it on sdcard. Flash into recovery. It's all! Enjoy of your new governors.
Change the covernor:
I recommend for changing the governors using of No-frills CPU Control , AnTuTu CPU Master (both of apps allow scheduler changing) or SetCPU ( search in forum for free version or donate in the market )
Setup:
I feel best performance with smartassV2 governor and deadline scheduler!
My Sources
My GitHUB
update 01.10:
Kernel code name "Hushi" - this kernel deserve some name
Implement DMA Buf - the biggest change in this release. More about Buffer Management
A lot of patches - For more info checkout my github
update 15.08:
Switch to SLOB allocator instead of SLAB
Used latest CB toolchain
update 30.06:
Added force fast charge patch!
notes to get it working :
1 Install Fast Charge app /it is free/
2. The most important - toggle fast charge on and then plug the pc cable otherwise fast charging don't work! /don't be noob like me/
update 24.06:
Added Row Scheduler
Added FIFO Scheduler
update 08.03:
Updated cpu frequency
Added patch to allow lower wifi signals
update 13.01:
Added Lionheart governor
Added interactiveX governor
Added patch for enable swaptoken only when swap is full
Build with CB toolchain instead of linaro
update 12.01:
SmartassV2 governor is set to be default instead ondemand
Added lagfree governor
Enabled BFQ scheduler by request
Added Patch for release swapcache more aggressively
Reboot phone 5 sec after update the kernel
Thanks to:
Linus Torvalds
Virtous Team
yozgatg
-ck
Linaro Team
Sourcery CodeBench
ps I get the kernel sources from yozgatg's git if somebody know more recent repository please to tell me.
ps2 Please have in mind - the zip isn't signed.
hey thanks for the added governors, in the gen y visionx r3 thread qriozum posted a compiled kernel that was v3.0.56.1 post #1489 you could probably ask him where his git is. also if you could, it would be nice to see a kernel with 2 way call recording, as i have heard that its easy to implement in the kernel.. but thanks for this.
btw, just saw that in his sig he has 3.0.57, also check his post history.
also, if you could include the new bfq scheduler and allow the minimum clock speed to be set to 128mhz, that'd be great. thanks!
pyrorob said:
hey thanks for the added governors, in the gen y visionx r3 thread qriozum posted a compiled kernel that was v3.0.56.1 post #1489 you could probably ask him where his git is. also if you could, it would be nice to see a kernel with 2 way call recording, as i have heard that its easy to implement in the kernel.. but thanks for this.
btw, just saw that in his sig he has 3.0.57, also check his post history.
also, if you could include the new bfq scheduler and allow the minimum clock speed to be set to 128mhz, that'd be great. thanks!
Click to expand...
Click to collapse
Thanks for reply. I will ask qriozum for the newer sources For the scheduler I don’t think the bfq is good chose because noop and deadline are more battery frendly than it, or if you use swap cfq work better with swap defragmentation For minimum clock speed I must research more if this is possible Thanks again.
Thanks for making this
Is this kernel flashable on aokp vision milestone 6 (ICS 4.0.4) since it has 2.6.35.14 kernel?
Thanks
ilbeppez said:
Thanks for making this
Is this kernel flashable on aokp vision milestone 6 (ICS 4.0.4) since it has 2.6.35.14 kernel?
Thanks
Click to expand...
Click to collapse
I thins so. I use gen y visionx r3 (ICS 4.0.4). Try it but make backup before flash just in case
Thanks, have this kernel running with viperZ rom. It respons very wel, seems more stable. Will test for some days
ineedone said:
Thanks, have this kernel running with viperZ rom. It respons very wel, seems more stable. Will test for some days
Click to expand...
Click to collapse
Great, I don’t have really good experience with viperZ rom. For me was a bit slow and laggy I planning to improve few options tonight for more performance but first I will test them.
I don't know if Virtuous Kernel maybe it's only for Sense based roms and not AOSP like cyanogen / aokp..
someone already tried this on other aosp roms?
ilbeppez said:
I don't know if Virtuous Kernel maybe it's only for Sense based roms and not AOSP like cyanogen / aokp..
someone already tried this on other aosp roms?
Click to expand...
Click to collapse
I dont think so. But if you are disturbed about it the safest way is to do backup in the recovery and if something goes wrong just restore the backup I rarely test new roms but before flash every time I make fresh backup of my current rom if I dont like the new one restoring is easy
there are big differences between sense-kernel and aosp-kernel... shouldn't work without trouble!
alexinc said:
there are big differences between sense-kernel and aosp-kernel... shouldn't work without trouble!
Click to expand...
Click to collapse
Huh sad news in this case. Can you give me something to see more about those differences?
Neo2SHYAlien said:
planning to improve few options tonight for more performance but first I will test them.
Click to expand...
Click to collapse
Lookin forward to it. Can you tell me what tweaks you've used?
I've not yet supercharged it , do you think this is a good idea, give improvement? Will try anyway just want your opinion
ineedone said:
Lookin forward to it. Can you tell me what tweaks you've used?
I've not yet supercharged it , do you think this is a good idea, give improvement? Will try anyway just want your opinion
Click to expand...
Click to collapse
Fo sho big :good: for supercharging. I use it from very log time About the improvements are only kernel related - first i will remove some unnecessary options like himem support( it's needed for system with 4G and more ram ) and some formats this will decrease a bit size and boot time(aron few ms), also I will play with CONFIG_HZ value and enabling of sysvipc, cgroups and bfq scheduler too
Beastmode mod kernel
Here is the github for beastmode mod kernel :
https://github.com/thachtunganh/beastmode-1.5/
Try compiling it for vision.
Updates and so...
Updated version with lagfree governor, BFQ scheduler and patch for Patch for release swapcache more aggressively is available.
For next version i plan to add ck's Brain **** Scheduler (BFS), interactiveX governor and some ck's memory and swap management patches.
All feedbacks and suggestions are welcome!
ajhavery said:
Here is the github for beastmode mod kernel :
https://github.com/thachtunganh/beastmode-1.5/
Try compiling it for vision.
Click to expand...
Click to collapse
I will try but right now I don't have enough time for solving drivers issues ( actually I'm weak kernel dev ). Thanks for source.
There is also a thread for the Beast Mode Kernel in DHD section, seems to be very interesting. Might help as well.
http://forum.xda-developers.com/showthread.php?t=2049368
[KERNEL][GPL][3.0.y][Beast Mode MOD][v0.4][30/12/2012]
Sent from my HTC Desire Z using xda app-developers app
olobex said:
There is also a thread for the Beast Mode Kernel in DHD section, seems to be very interesting. Might help as well.
http://forum.xda-developers.com/showthread.php?t=2049368
[KERNEL][GPL][3.0.y][Beast Mode MOD][v0.4][30/12/2012]
Sent from my HTC Desire Z using xda app-developers app
Click to expand...
Click to collapse
Thanks. Yes in quick view I saw a lot interesting things, later will dig more deep in the thread.
I just flashed this kernel on my DZ with aokp,
booted and restarted like the description,
testing it right now
ok data / phone works,
wifi is not activable, not working at all
I'll remove the battery and reboot.
edit nothing to do, still not working,
the toggle in notification bar is grey out and i'm having now the text scrambled on all icons.
I'm restoring
I think it's because this kernel is for sense based roms.
Maybe you sould try to compile this from cyanogen : http://forum.xda-developers.com/showthread.php?t=1492461
source here : https://github.com/jerl92/htc7x30-3.0
thanks
Can this kernel work with virtuous sense 2.0 gb??
Sent from my HTC Vision using xda app-developers app
ilbeppez said:
I just flashed this kernel on my DZ with aokp,
booted and restarted like the description,
testing it right now
ok data / phone works,
wifi is not activable, not working at all
I'll remove the battery and reboot.
edit nothing to do, still not working,
the toggle in notification bar is grey out and i'm having now the text scrambled on all icons.
I'm restoring
I think it's because this kernel is for sense based roms.
Maybe you sould try to compile this from cyanogen : http://forum.xda-developers.com/showthread.php?t=1492461
source here : https://github.com/jerl92/htc7x30-3.0
thanks
Click to expand...
Click to collapse
Sad news but will be easy to add all modifications to jerl92's repo. Expect soon version and for aokp Can I ask you for your /proc/config.gz file?? I have need to see compilation options for this kernel maybe and the are different too.
Steven How said:
Can this kernel work with virtuous sense 2.0 gb??
Sent from my HTC Vision using xda app-developers app
Click to expand...
Click to collapse
I don't think so. This is kernel for ICS. If you want test with backup and feedback, but I expect issues with GB roms
Announcing the Quattrimus kernel for the P930 and SU640
This is a drop-in replacement for the standard kernel in Android 4.2 based ROMs.
It will work with CM 10.1, AOKP 4.2, and any other custom ROMs.
Features
* Compiled with Linaro 4.6 2012.03
* Overclock to 1674MHz
* Entropy depletion patch
Instructions
* Download the zip file to your sdcard
* Boot into recovery
* Flash the zip file
* Reboot
Download
P930: kernel-p930-1.1.zip md5=0a39d52b638781c5a129d845a4f81e8e
SU640: kernel-su640-1.1.zip md5=2fcb674df86ac71d48c62495f4cbffc9
Source
https://github.com/thebigq/lge-kernel-iproj
Changelog
Version 1.0
* Initial release
Version 1.1
* Compile with Linaro 4.6 to fix instability.
@devs: This kernel package only updates the kernel binary and modules using the same technique as AnyKernel. This is all done with the included updatebootimg binary, which is a modified version of the standard mkbootimg.
Usage should be obvious if you look at the edify script. It can update only the kernel, only the ramdisk, or both (but if you're doing both, you can just write a new boot.img directly and be done with it).
Feel free to extract the package and use the tools to cook your own kernels.
Sweet. Trying it now
tmdcode, can you build a kernel for lu6200 from vs920 cm source? We have cm 10.1 rom for lu6200 which ported from p930. But kernel from ported rom is not good enough for daily use.
@tdmcode
Do you get warnings when compiling with Linaro toolchain?
I dunno if these warnings affect the stability though compiled successfully.
P930 kernel works but SU640 kernel stucked at LG logo.
Moreover, where to get "kernel" file from compiled kernel? Is it zImage?
Thanks
lyfkevin said:
P930 kernel works but SU640 kernel stucked at LG logo.
Moreover, where to get "kernel" file from compiled kernel? Is it zImage?
Thanks
Click to expand...
Click to collapse
@lyfkevin, can you build a kernel from source for lu6200. there are many people using p930 ported rom for lu6200 but kernel is not good enought for daily use because of bad performance and battery lìe
I the O/C freq kicks in "automatically" or should I define it as max freq under performance ?
JobNick said:
I the O/C freq kicks in "automatically" or should I define it as max freq under performance ?
Click to expand...
Click to collapse
You have to set it as the max freq
Sent from my LG-P930 using xda app-developers app
@lyfkevin:
Linaro warnings like this are normal:
unwinding may not work because EXIDX input section ... is not in EXIDX output section
The compiled kernel is arch/arm/boot/zImage. this is frequently renamed to "kernel".
The kernel I posted yesterday reboots when GPS turns on for P930 and VS920. Apparently it doesn't even boot on SU640. So I will be making a new one today.
For me it reboots when connected to BT headphones and making a call ...
Version 1.1 is up. Should fix instability issues.
tdmcode said:
Version 1.1 is up. Should fix instability issues.
Click to expand...
Click to collapse
I'm on CM10.1 M2 and kernel v1 can i just flash v1.1 over it or go back to "pure" CM10.1 M2 (from backup) and then flash ?
JobNick said:
I'm on CM10.1 M2 and kernel v1 can i just flash v1.1 over it or go back to "pure" CM10.1 M2 (from backup) and then flash ?
Click to expand...
Click to collapse
Just flash right over the old one. No restore or wipe necessary.
tdmcode said:
Just flash right over the old one. No restore or wipe necessary.
Click to expand...
Click to collapse
Okay, thanks for fast reply.
1) I've tested GPS functionality with Waze app. and my phone did not crash...(v1 kernel) GPS turned on and locked on satellites.
2) Which governor/scheduler/min max freq. do you use ?
JobNick said:
Okay, thanks for fast reply.
1) I've tested GPS functionality with Waze app. and my phone did not crash...(v1 kernel) GPS turned on and locked on satellites.
2) Which governor/scheduler/min max freq. do you use ?
Click to expand...
Click to collapse
Despite what you might think, I'm not really a governor/scheduler connoisseur. I just run the defaults. I do run at max freq though.
tdmcode said:
Despite what you might think, I'm not really a governor/scheduler connoisseur. I just run the defaults. I do run at max freq though.
Click to expand...
Click to collapse
Well to tell the truth, I don't really believe in all of this scheduling/governor algorithms.
I just was curious, that's why I asked.
---------- Post added at 11:41 PM ---------- Previous post was at 11:24 PM ----------
tdmcode said:
I do run at max freq though.
Click to expand...
Click to collapse
192/1674 MHz correct ?
JobNick said:
192/1674 MHz correct ?
Click to expand...
Click to collapse
Yes sir.
With a fully charged battery and after idling for 8 hours battery dropped to 90%.
GPS works and locks.
Bluetooth having issues like all other 4.2 based roms.
@tdmcode my device (P936) go in boot loop after install your kernel, what could be the reason?
I test it with CM10.1 & official AOKP
FYI: wind kernel is working fine after remove the under voltage setting
What is LightningZap! kernel?
It is a lightweight, yet heavily tweaked and optimized kernel geared towards balancing performance and battery life.
Please read this ENTIRE post before downloading and flashing LightningZap! kernel.
Disclaimer: As with all custom kernels, you flash at your own risk. Always make a backup! I nor the associates of LightningZap! kernel, Teamfahq, or the testers group cannot and will not take responsibility for YOUR actions. I cannot always control what works and doesn't work with ROMs other than my own. If there is a bug, feel free to report it with logs, but note that the problem may be due to a conflict with coding int the ROM. If said condition exists, please discuss the concern with said ROM developer. If a bug condition does exist within the kernel and there is a known fix for said bug, please don't hesistate to link me to that fix. Make sure to give credit, thanks, and maybe even a cup of coffee to your developers. If you have a feature request, please feel free to share it as well.
Features:
Based off ElementalX kernel by flar
blue_schedul governor from blue_spark kernel thanks to eng.st
Ondemand gov Optimized for better performance while maintaining battery life
FIOPS ioscheduler by default (suggest leavving it that way)
My insane readahead tweak **** In HDK-Mod kernel manager, it reports "Not in range." This is normal DO NOT adjust. My tweaks optimizes readahead per demand usage.****
LZ4 compression
O3 Optimizations
zram
lz-sysctl tweaks
Sound control (speaker, earpiece and mic)
Backlight min setting
Adjust or disable vibration
Advanced Color Control and K-Lapse
Block wakelocks
NTFS r/w, CIFS and NFS support
WireGuard support
Option to disable fsync
Pass SafetyNet
LightningZap! kernel will work on oneplus 6 and oneplus 6T on stock OOs and most custom roms. There are 2 versions, PIE and NDP.
Diferences
PIE was built for custom roms
STOCK was modified for stock OOS (Does not include commits to fix fps that custom roms need)
NDP was slightly modified for SkyDragonOs by removing wake gestures. Wake gestures are natviely written into SkyDragonOs (and maybe more roms).
I have not tested all roms to see what works and what doesn't. So, I would suggest trying PIE first. If wake gestures (like dt2w) do not work, try NDP. Feel free to report what rom and LightningZap! kernel version you are using.
Bug reporting is HIGHLY encouraged, but please accompany your reports with logs. I cannot do much to fix things without them. Pruning of the logs is deeply appreciated as well.
I feel that if you are here, you already know how to flash a custom kernel. If not, close this page and do some research about it first. This will not erase recovery or root when flashing. But, I would like to quote @eng.stk
Warning: If you come from other kernel or have any issues, you should dirty flash your ROM before flashing LightningZap! zip to avoid problems.
Reflash ROM -> if you want root flash SuperSU or Magisk (default, no plugins/modules) -> flash LightningZap!.
If you are already rooted or upgrading between LightningZap! versions, just flash the kernel zip. Also uninstall or clean data of any kernel control app you're using.
Click to expand...
Click to collapse
Download links:
LightningZap! kernel PIE- Updated 10-07-2019
LightningZap! kernel NDP
LightningZap!-kernel-STOCK
Changelog
XDAevDB Information
LightningZap! kernel for OnePlus 6/6T
Special thanks to:
flar, eng.stk, HolyAngel Kernel Source: OnePlus6T-LZ
Version Information
Status: Stable
Current Stable Version: 2.3
Stable Release Date: 10-05-2019
ROM tracker
Here I will post what version of LightningZap! kernel works with what ROMs. As well as any noted bugs with said rom.
PIE
Most custom roms
NDP
SkyDragonOs
Stock
Stock OOS
It sounds very interesting! But a doubt that not before the SkyDragon rom was running the HolyDragon kernel? This would be the evolution of that kernel?
It sounds very promising! As soon as possible I will try it!
Thank you man!!
thomas.raines said:
Here I will post what version of LightningZap! kernel works with what ROMs. As well as any noted bugs with said rom.
PIE
Stock OOS
NDP
SkyDragonOs
Click to expand...
Click to collapse
Thank you so much. Do you recommend sticking with schedutil, which is default I believe, or do you prefer Onedemand or Blu instead? Thanks again for the kernel, I'm checking it out now.
---------- Post added at 04:18 PM ---------- Previous post was at 04:14 PM ----------
Everything seems great so far except one thing. Has anyone else noticed that their fingerprint sensor stopped working on OOS stable? Or could this just be a coincidence for me?
Ryano89 said:
Thank you so much. Do you recommend sticking with schedutil, which is default I believe, or do you prefer Onedemand or Blu instead? Thanks again for the kernel, I'm checking it out now.
---------- Post added at 04:18 PM ---------- Previous post was at 04:14 PM ----------
Everything seems great so far except one thing. Has anyone else noticed that their fingerprint sensor stopped working on OOS stable? Or could this just be a coincidence for me?
Click to expand...
Click to collapse
Isnt working for me either
fosgate24360 said:
Isnt working for me either
Click to expand...
Click to collapse
Yeah, I tried to reregister my FP but it won't let me.
Ryano89 said:
Yeah, I tried to reregister my FP but it won't let me.
Click to expand...
Click to collapse
It's not going to work on OOS as he's got the FOD hacks required for functional fingerprint on custom ROMs. Doing this breaks fingerprint on OOS, and removing them will break it on custom ROMs. The only way to accommodate both currently is with two separate kernel variants.
Great work Thomas
Riddle5 said:
It sounds very interesting! But a doubt that not before the SkyDragon rom was running the HolyDragon kernel? This would be the evolution of that kernel?
Click to expand...
Click to collapse
Completely different kernel from HolyDragons.
Ryano89 said:
Thank you so much. Do you recommend sticking with schedutil, which is default I believe, or do you prefer Onedemand or Blu instead? Thanks again for the kernel, I'm checking it out now.
---------- Post added at 04:18 PM ---------- Previous post was at 04:14 PM ----------
Everything seems great so far except one thing. Has anyone else noticed that their fingerprint sensor stopped working on OOS stable? Or could this just be a coincidence for me?
Click to expand...
Click to collapse
For governor, use whatever fits your needs the most. I recommend trying all 3 to see which on egives you the most performance and battery life.
return.of.octobot said:
It's not going to work on OOS as he's got the FOD hacks required for functional fingerprint on custom ROMs. Doing this breaks fingerprint on OOS, and removing them will break it on custom ROMs. The only way to accommodate both currently is with two separate kernel variants.
Click to expand...
Click to collapse
Yep... Accidentally merged those commits to the PIE branch. Running new build now. oops...
PIE branch updated. Fingerprint should be fixed now.
The New Update Is Buttery Smooth Bro Great Work Fp Works Better Than Stock Oos the only thing is the gaming performance has came down can experiencing shutter lags, and fps drops any fixes over that rest is just amazing bro .
Dhairya said:
The New Update Is Buttery Smooth Bro Great Work Fp Works Better Than Stock Oos the only thing is the gaming performance has came down can experiencing shutter lags, and fps drops any fixes over that rest is just amazing bro .
Click to expand...
Click to collapse
With your favorite kernel manager app, try using ondemand governor and lowering the up_threshold value adjust the sampling rate.
Using 3D benchmark app with Sling Shot Exteme setting up_threshold at 70 (default value) OpenGL ES 3.1 scored 4632 and Vulkan came in at 4272
Dropping it to 15 (lowest possible value)
OpenGL ES 3.1 scored 4857 and Vulkan came in at 4456
Setting it to 90
OpenGL ES 3.1 scored 4337 and Vulkan came in at 4068
These are overall scores and only an example. Results may very per device.
You can also try raising the sampling_rate as well. But I think the default value is best.
Be aware when adjusting these values, your perfomance vs battery life is effected.
lower up_threshuold will increase performance and decrease battery life whereas higher up_threshold decreases performance but raises battery life. Adjusting these values too high/low can cause the device to become unstable or overheat. Make your adjustments in small increments and if you notice a significant lag or your device is starting to get too hot, you can change them back and avoid complete device failure.
And by battery life, I mean the discharge rate, not the length of time until your battery takes a poop and you have to replace it or your phone.
New download link for pie branch. New branch added STOCK.
So, as pointed out by return.of.octobot , the PIE branch fp worked but became broken after reverting the commit for fp on custom roms. So, I made a new branch for OOS only and the PIE branch is for custom ROMs.
Tried flashing this stock version kernel on OOS 9.0.17 via FK manager app and got the abort message with error as unsupported device. Please see attached screenshot and let me know if there is something I need to change.
deepu458 said:
Tried flashing this stock version kernel on OOS 9.0.17 via FK manager app and got the abort message with error as unsupported device. Please see attached screenshot and let me know if there is something I need to change.
Click to expand...
Click to collapse
Flash in recovery. Since this is not a franko kernel, the franko kernel app won't work...
thomas.raines said:
Flash in recovery. Since this is not a franko kernel, the franko kernel app won't work...
Click to expand...
Click to collapse
Hello dear dev, is it working on 10.3.0 OOS for OP 6?cause the latest build is from October 2019...
James Blode said:
Hello dear dev, is it working on 10.3.0 OOS for OP 6?cause the latest build is from October 2019...
Click to expand...
Click to collapse
The thread title says it all...OOS9/ Pie.
James Blode said:
Hello dear dev, is it working on 10.3.0 OOS for OP 6?cause the latest build is from October 2019...
Click to expand...
Click to collapse
The current released and stable version is for android 9.0/pie.
Thre android 10 version is still in testing.
thomas.raines said:
The current released and stable version is for android 9.0/pie.
Thre android 10 version is still in testing.
Click to expand...
Click to collapse
Thanks for letting me know...ill wait for this great kernel...