Develop Bugs

[Q] How change from S-On to S-off

Hie,
I need a little help.I am stuck and my HTC one X is not working.
I am on Hboot 0.96.0000 and want to upgrade to 1.39
and my HTC one x is S-ON plz help me how to change this to S-OFF plz help me.
My CID is 02__001
Plz plz plz help me...

gandhiirfan said:
Hie,
I need a little help.I am stuck and my HTC one X is not working.
I am on Hboot 0.96.0000 and want to upgrade to 1.39
and my HTC one x is S-ON plz help me how to change this to S-OFF plz help me.
My CID is 02__001
Plz plz plz help me...
Click to expand...
Click to collapse
Its possible to upgrade hboot but you cannot change to s-off on the one x.
Bite me

gandhiirfan said:
Hie,
I need a little help.I am stuck and my HTC one X is not working.
I am on Hboot 0.96.0000 and want to upgrade to 1.39
and my HTC one x is S-ON plz help me how to change this to S-OFF plz help me.
My CID is 02__001
Plz plz plz help me...
Click to expand...
Click to collapse
There is no flashable firmware for your device in the firmware thread. However, there is a nandroid backup for your CID which is here : http://db.tt/bhDEUu8z (1.29.206.11)
Post the result of fastboot getvar version-main
If it matches the one with the nandroid backup, then you can restore it and then flash the stock recovery and then OTA update to JB!
S-OFF is not possible for the One X currently!

nogotaclue said:
Its possible to upgrade hboot but you cannot change to s-off on the one x.
Bite me
Click to expand...
Click to collapse
Hie,
Thanks for the reply.
Request to plz guide me how to go about in upgrading hboot????
Plz help me..Humble request....

vin4yak said:
There is no flashable firmware for your device in the firmware thread. However, there is a nandroid backup for your CID which is here : (1.29.206.11)
Post the result of fastboot getvar version-main
If it matches the one with the nandroid backup, then you can restore it and then flash the stock recovery and then OTA update to JB!
S-OFF is not possible for the One X currently!
Click to expand...
Click to collapse
Hie tHANKS,
cAN YOU PLZ guide me how to restore and how to stock recovery and then OTA update to JB??
PLz plzplz....
Thanks in advance...

People are trying to help you and you are not reading the replys!. Go into fastboot and type "fastboot getvar version-main" without the quotes, and report back with the results.
Bite me

nogotaclue said:
People are trying to help you and you are not reading the replys!. Go into fastboot and type "fastboot getvar version-main" without the quotes, and report back with the results.
Bite me
Click to expand...
Click to collapse
Hey sorry i forgot to post that my when i type fastboot getvar version-main I get 1.29.206.11.

Why don't you let him use a RUU ?
http://bugsylawson.com/files/file/1...62-radio-2120413520-release-275038-signedexe/
And his firmware is 100% here in the OP
http://forum.xda-developers.com/showthread.php?t=1957376
V you disappoint me a bit here

Mr Hofs said:
Why don't you let him use a RUU ?
http://bugsylawson.com/files/file/1...62-radio-2120413520-release-275038-signedexe/
And his firmware is 100% here in the OP
http://forum.xda-developers.com/showthread.php?t=1957376
V you disappoint me a bit here
Click to expand...
Click to collapse
Yes it's always better to use a RUU, didn't know his version-main so suggested a nand first... my bad...
Looked at the whole OP twice, where is the firmware for 02__001??
Edit: LOL @ me It's Orange 2 is it? Opened that thread and searched for 02 LOL! (number 0)....

need nandroid backup for S-ON HTC ONE X
can anyone suggest me a nandroid backup
My HTC ONE X is S-ON
C:\HTC>fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 0.96.0000
INFOversion-baseband: 1.1204.90.13
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.29.707.11
INFOserialno: ********************
INFOimei: ***********************
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: None
INFObattery-status: good
INFObattery-voltage: 3769mV
INFOdevpower: 55
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 0.828s
C:\HTC>fastboot oem rebootRUU
... INFOSave data from original MSC...
INFOSave data from SIF...
INFOUpdate partition data to SIF partition
INFOoffset = 0
INFOUpdate partition data from original MSC...
INFOoffset = 0
INFO[MSG] OKAY
OKAY [ 0.250s]
finished. total time: 0.250s

rjmurugan said:
can anyone suggest me a nandroid backup
My HTC ONE X is S-ON
C:\HTC>fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 0.96.0000
INFOversion-baseband: 1.1204.90.13
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.29.707.11
INFOserialno: ********************
INFOimei: ***********************
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: None
INFObattery-status: good
INFObattery-voltage: 3769mV
INFOdevpower: 55
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 0.828s
C:\HTC>fastboot oem rebootRUU
... INFOSave data from original MSC...
INFOSave data from SIF...
INFOUpdate partition data to SIF partition
INFOoffset = 0
INFOUpdate partition data from original MSC...
INFOoffset = 0
INFO[MSG] OKAY
OKAY [ 0.250s]
finished. total time: 0.250s
Click to expand...
Click to collapse
Here is the ruu you can use
http://bugsylawson.com/files/file/1...73-radio-2120412318-release-270370-signedexe/
And then ota onwards to jellybean !

[Q] Stuck on Android 4.0.3

My HTC One X (Endeavour, UK version - stock, as far as I'm aware) refuses to update OTA. It's currently claiming to be on 4.0.3 but checking for updates claims nothing is available when there should be plenty of updates since this. I've tried both through Three and GiffGaff to rule out a crappy provider not having the updates.
Does anyone know why this is happening? And if something odd may be interfering, what it may be and how to revert it?
It's driving me mad.
Thanks.

Enverex said:
My HTC One X (Endeavour, UK version - stock, as far as I'm aware) refuses to update OTA. It's currently claiming to be on 4.0.3 but checking for updates claims nothing is available when there should be plenty of updates since this. I've tried both through Three and GiffGaff to rule out a crappy provider not having the updates.
Does anyone know why this is happening? And if something odd may be interfering, what it may be and how to revert it?
It's driving me mad.
Thanks.
Click to expand...
Click to collapse
post the results of "fastboot getvar all" but remove the imei and serial number.

Done
Code:
INFOversion: 0.5a
INFOversion-bootloader: 0.95.0000
INFOversion-baseband: 2.1204.127.19
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.29.401.12
INFOserialno: REMOVED
INFOimei: REMOVED
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: None
INFObattery-status: good
INFObattery-voltage: 3962mV
INFOdevpower: 76
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 0.822s

Enverex said:
Done
Code:
INFOversion: 0.5a
INFOversion-bootloader: 0.95.0000
INFOversion-baseband: 2.1204.127.19
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.29.401.12
INFOserialno: REMOVED
INFOimei: REMOVED
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: None
INFObattery-status: good
INFObattery-voltage: 3962mV
INFOdevpower: 76
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
finished. total time: 0.822s
Click to expand...
Click to collapse
it's not showing your cid, go on play store and get the app called "cid getter" then tell me what your cid is, or do you already know?

1.29.401. It's unbranded wwe. Use ruu's .....2.17.401 and 3.14.401 are available

Mr Hofs said:
1.29.401. It's unbranded wwe. Use ruu's .....2.17.401 and 3.14.401 are available
Click to expand...
Click to collapse
@Enverex there you go, get one of the ruu's @Mr Hofs has just mentioned from here>>>>>http://www.androidruu.com/?developer=Endeavor

Thanks. I downloaded that app and apparently the CID is HTC__001.

Unbranded

Christ this is tedious.
First I had error 170 USB Connection error. Managed to resolve that.
Then 171 USB Connection error. Got around that.
Now I'm on 132 Signarure (yes, not signature) error.

It's mandatory to install the 2.17.401 ruu first with a relocked bootloader. The 3.14 ruu won't work now beecause you come from a to low hboot

Mr Hofs said:
It's mandatory to install the 2.17.401 ruu first with a relocked bootloader. The 3.14 ruu won't work now beecause you come from a to low hboot
Click to expand...
Click to collapse
Ahh ok, that makes sense. And these recaptchas are making me want to stab myself in the face...

Enverex said:
Ahh ok, that makes sense. And these recaptchas are making me want to stab myself in the face...
Click to expand...
Click to collapse
2.17 on that website is corrupted, it's only ~80MB. Had to download it from elsewhere.

Cool. Got a link for me ?

Mr Hofs said:
Cool. Got a link for me ?
Click to expand...
Click to collapse
I can't post links, I don't have enough posts apparently. It was named "RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radio_2.1204.135.20_release_274900_signed".
I downloaded "RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radio_2.1204.135.20_release_274900_signed" from another site and that went through successfully, but I've just tried "RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed" again and I'm still getting a signature error. Any ideas?

Boot up the phone and check for official ota's ! That might work

[Q] Install wrong rom and phone not stratup

Hey
I have looking for a good rom for my HTC desire a8181 but no one of them will work with my 3g or high speed internet. Now i have install rom there sure not fit to my phone and now it will not startup, only stock with HTC logo.
My recovery is also not work.
The only thing there seems to work fine is Hboot and Bootloader.
I have never been out for that before and i have looking at the internet to find something there can fix it but have not been locky.
I had installe Revolutionnary but i cant install that again...
My phone is root and s-off...
My cid is TDC in denmark
Here is some info about the phone:
c:\mini-adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 6.93.1002
INFOversion-baseband: 4.05.00.11
INFOversion-cpld: None
INFOversion-microp: 031d
INFOversion-main: 1.15.405.1
INFOserialno: HT06JPL06586
INFOimei: 357841038693475
INFOproduct: bravo
INFOplatform: HBOOT-8x50
INFOmodelid: PB9920000
INFOcidnum: HTC__Y13
INFObattery-status: good
INFObattery-voltage: 4148mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-365c78d6
INFOhbootpreupdate: 11
all: Done!
finished. total time: 0.016s
i really hope someone have something there can fix it...

Since youve got S-OFF this hopefully shouldnt be too hard to fix. Follow the instructions here to flash 4ext recovery using a PB99IMG. Then go into recovery, full wipe, and flash a rom.

Thanks.... any other idea about a rom
Chromium_ said:
Since youve got S-OFF this hopefully shouldnt be too hard to fix. Follow the instructions here to flash 4ext recovery using a PB99IMG. Then go into recovery, full wipe, and flash a rom.
Click to expand...
Click to collapse
Thanks a lot.... i works and recovery is working again... i am happy i got fix the s-off
Do you know anythings about what rom there will work for my phone.... everythings work in those rom i have try but not the internet (3g/4g)...only the wireless internet....

[Q] Help with RUU hboot 1.18.0000

Hi I have a htc one v on 3 (H3G__001) it is on hboot 1.18.0000 radio 3831.19.00.120
I cant seem to find a ruu file for it even on androidfileshost.
all other ruu files fail at one point or another usually due ro wrong CID or older HBOOT
I have tried running a ruu with the correct hboot then when it got to the confirmation page i types %.temp% and found where the temp
install files were and i opened the rom.zip and edited the android-info.txt file adding H3G__001 to the file saving it and rezipping it then
continuing with the RUU installation.
Im hoping someone can help me recover the phone as im stuck in how to get it back working.
It is my fault as I locked the bootloader when returning to stock BEFORE I flashed the recovery and hboot (I know im an idiot) and htcdev wont unlock my relocked bootloader it just freezes then eventually gives me the "too many links" error message
here is the info I got from typing fastboot getvar all
C:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.18.0000
INFOversion-baseband: 3831.19.00.120
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOserialno: HT24JTV02137
INFOimei: 351816054460252
INFOproduct: primou
INFOplatform: HBOOT-7230
INFOmodelid: PK7610000
INFOcidnum: H3G__001
INFObattery-status: good
INFObattery-voltage: 3954mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 8591a55c
INFOhbootpreupdate: 12
INFOgencheckpt: 0
all: Done!
Thank you for reading and I hope you can help.

micky3936 said:
Hi I have a htc one v on 3 (H3G__001) it is on hboot 1.18.0000 radio 3831.19.00.120
I cant seem to find a ruu file for it even on androidfileshost.
all other ruu files fail at one point or another usually due ro wrong CID or older HBOOT
I have tried running a ruu with the correct hboot then when it got to the confirmation page i types %.temp% and found where the temp
install files were and i opened the rom.zip and edited the android-info.txt file adding H3G__001 to the file saving it and rezipping it then
continuing with the RUU installation.
Im hoping someone can help me recover the phone as im stuck in how to get it back working.
It is my fault as I locked the bootloader when returning to stock BEFORE I flashed the recovery and hboot (I know im an idiot) and htcdev wont unlock my relocked bootloader it just freezes then eventually gives me the "too many links" error message
Thank you for reading and I hope you can help.
Click to expand...
Click to collapse
Not even here: http://androidruu.com/?developer=Primo
And, are you primou or primoc?

No sadly its not on there as only for older hboots for my phone. there is 1.18.000 hboots on there but not to match my cid.
Im on primou with 3 uk which is H3G__001

[Q] htc desire with revolutionary and s-off. uproot advice for

Hey guys I want to unroot my old desire, I have managed to put original ruu on but my hboot still says revolutionary and my hboot is 6.93 I tried downlaoding and running android flasher but it failed when writing the hboot that came with it. Does anyone know how to do it so I can have it locked with s-on?
I don't believe I have stock hboot and can't find a good link to one either.
Thanks

Use bortak's troubleshooting guide, stickied to the top of q&a
Point number [8]

eddiehk6 said:
Use bortak's troubleshooting guide, stickied to the top of q&a
Point number [8]
Click to expand...
Click to collapse
So if I follow this:
Visit Alpharev and download the "Downgrader"
[STEP2]- Flash the downgrader over fastboot. This can be done with Android Flasher, cmd, or fastboot commander (Note: android flasher is the
only program that does not require third party software such as Android SDK or Java JDK)
[STEP3]- You should now notice the title on the bootloader screen is "Alpharev Unlock", run the RUU again and you will have S-ON'd your device.
Am I right in saying it will change to s-on but it will also get rid of revolutionary at the top of the screen? Can I change that to locked after by using fastboot oem lock?

si_d_2003 said:
Am I right in saying it will change to s-on but it will also get rid of revolutionary at the top of the screen?
Click to expand...
Click to collapse
Yes
Can I change that to locked after by using fastboot oem lock?
Click to expand...
Click to collapse
No need

eddiehk6 said:
Yes
No need
Click to expand...
Click to collapse
I tried to run the ruu : RUU_Bravo_H3G_UK_1.22.771.1_Radio_32.36.00.28U_4.06.00.02_2_release_127568_signed and I get a HBoot version error and it exits the exe.
Is there any advice you could give me please?

This is my info:
c:\fastboot>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 0.93.0001
INFOversion-baseband: 5.09.05.30_2
INFOversion-cpld: None
INFOversion-microp: 051d
INFOversion-main: 2.10.405.2
INFOserialno:
INFOimei:
INFOproduct: bravo
INFOplatform: HBOOT-8x50
INFOmodelid: PB9920000
INFOcidnum: H3G__001
INFObattery-status: good
INFObattery-voltage: 4187mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-365c78d6
INFOhbootpreupdate: 11
all: Done!
finished. total time: 0.030s

si_d_2003 said:
1.22.771.1
Click to expand...
Click to collapse
si_d_2003 said:
INFOversion-main: 2.10.405.2
Click to expand...
Click to collapse
Ur version main is 2.10.405.2 the ruu ur trying is version 1.22.771.1 so u have to use a ruu with version main 2.10.405.2 or higher

In addition to the above, find and use the 2.3.3 GB RUU from shippedroms
If it fails to flash normally, flash it using the PB99IMG.zip method, point [7] from the same guide