Develop Bugs

[Q] ODIN back to stock now.. nothing

I was following the forum below
http://forum.xda-developers.com/showthread.php?t=1321811
to get my rooted stock Tmobile Galaxy S2 back to un-rooted stock so i could update to the OTA update as i need the wifi.
Upon following the first ODIN command i got a failed and so i unpluged the phone and tried to re-ODIN and all it would do is stay at connecing or something similar.
I pulled the battery and tried to enter download mode again and I am unable to turn the phone on or enter download mode.
Ideas?
when i change the usb cable to a different plug on PC the PC then will attempt to install driver but the phone never show the download screen and the PC says unalbe to install driver.

Does it try to install the Samsung drivers or qualcom modem drivers?
Sent from my SGH-T989 using xda premium

Just Odin the 2.3.6 ROM...
Sent from my SGH-T989 using xda premium

xsteven77x said:
Just Odin the 2.3.6 ROM...
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
I would love to but nothing works. No power etc.. bricked. I have recieved my USB Jig today and it does nothing. Works on my vibrant fine to force into download mode but my Galaxy S2 nothing... no power no nothing.

avarize said:
Does it try to install the Samsung drivers or qualcom modem drivers?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
I had installed the drivers already with Kies

No Screen?

Hey all.
I was tryin to uprage to 2.3.6 version by sammobile.com. But something happened. I was upgrading with odin, phone got restarted and bum! There is no screen now. Button lights are still working. When i plugged in cable to pc, nothing happens. Now, what can i do? I rly dont want to send to service, i have to do this today. Please help

Find a tutorial how to install ADB and command adb reboot in adb, then flash a rom via odin. Follow the how to unbrick methode at the galaxy gio dev section
Sent from my GT-S5660 using xda premium

voetbalremco said:
Find a tutorial how to install ADB and command adb reboot in adb, then flash a rom via odin. Follow the how to unbrick methode at the galaxy gio dev section
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
But my phone isnt detectable? Is it works?

Just try..
Or pull the battery out , do it in and try to get to download mode, hold the 3 buttons till it goes on, atleast the keys, and connect to pc
Sent from my GT-S5660 using xda premium

I've already tried it, still black screen, nothing happened

Use the unbrick guide, and download other firmware
Sent from my GT-S5660 using xda premium

Computer doesn't see mobile

Hi all,
I do have the problem that my computer, suddenly, doesn't recognize my mobile.
I connected my Gio to the computer and normally I can access the Gio but now this isn't possible. I enabled the option in the setting to see my mobile but it isn't working ........
Can somebody please help me?

I used to have that problem getting my gio to connect to. Try putting it I'm USB debug mode and se if it installs the drivers. Also what rom?
Sent from my GT-S5660 using XDA

Hi,
I'm using: CyanogonMod-7.2.0-RC1-b1-gio_KANG but what do you mean with "Try putting it I'm USB debug mode" ..... how do I do that?

Settings- applications- "development" or similar, choose the one all the way down
Sent from my GT-S5660 using xda premium

Do you have installed kies? It has drivers.

Yes I did but then it's still not working. I'm afraid my mobile isn't correct there the battery is empty in a day and I can't reboot my mobile even if the battery is 100%.
I can only reboot with the power cable on the mobile ..........

Bet get someone looked at it it than, cuz thats strange
Sent from my GT-S5660 using xda premium

If you have cwm installed you can use that (mounts and storage --> mount usb)
Sent from my GT-S5660 using xda premium

you might need to to download Samsung kies sometimes. happens to me sometimes when i flash new roms.
just google search samsung kies and install it. ur computer should detect your phone and automatically install drivers after that.

You must install usb drivers

ShutteN said:
You must install usb drivers
Click to expand...
Click to collapse
I installed "KIES" and I thought that on that moment the drivers were installed at the same time but I thought there is an option to install only the drivers and not the software from "KIES" but I can't find it anymore .....

Just unpack the Kies installer with something like 7-Zip and get the USB drivers installer that way. I haven't had Kies installed on my computer in a very long time.

Sammobile has a installable .exe for the drivers, KIES isnt needed.
Sammobile.com
Firmwares»drivers»gt-s5660»download»install
Sent from my GT-S5660 using xda premium

How to turn on usb debugging mode when phone is bricked?

Sent from my GT-I9082 using xda app-developers app

neon933 said:
Sent from my GT-I9082 using xda app-developers app
Click to expand...
Click to collapse
You can't.
What kind of brick? Can you still enter Download mode?

Yeah..just soft brick..
Sent from my GT-I9082 using xda app-developers app

You can't enable the usb debugging while your phone is bricked but without it you can flash the stock rom!!!
Sent from my GT-I9082 using XDA Premium 4 mobile app

How??
Sent from my GT-I9082 using xda app-developers app

neon933 said:
How??
Sent from my GT-I9082 using xda app-developers app
Click to expand...
Click to collapse
Download the official firmware for your device based on country/carrier from Sammobiles.com
Go to download mode and flash using Odin from a pc
Try this video link
https://www.google.co.in/url?sa=t&s...twIwCA&usg=AFQjCNHsUFTtrGU1SgKktYgj-IktWBdIqQ
Hope it helps...
Sent from my GT-I9082 using xda app-developers app

if my phone is rooted and debugging mode is off .
how can i still recover my phone

jayc7x said:
if my phone is rooted and debugging mode is off .
how can i still recover my phone
Click to expand...
Click to collapse
If u can go to the Recovery U Can flash the ROM (if u have a ROM in Ext SD card) or Backup ROM and it will be Recovered....
OR ELSE
IF U CAN GO TO DOWNLOAD MODE THEN DO THIS
DOWNLOAD official firmware from Samsung Official Firmware Link Is Here http://samsung-updates.com/device/?id=GT-I9082
Steps :
1) Download The firmware for u r region from that link (Approx 1.0GB)
2) Download The Odin 3.04 or Odin 3.07
3) Keep The default settings what are ther when u open.
4) Click On PDA button and select the biggest file ~1.0GB
6) Press VOL DOWN+POWER+MENU and then press continue.
5) Click START button.
6) Wait till it shows PASS
7) Boot to stock recovery do a factory reset (Optional but Recommended)
Enjoy

I am having a doodle 3 1gb+4gb model it is stucked in bootloop and recovery in not opening . I am having the stock rom and everything but usb debugging is not active . What to do now plz help me

Rishi Daripa said:
I am having a doodle 3 1gb+4gb model it is stucked in bootloop and recovery in not opening . I am having the stock rom and everything but usb debugging is not active . What to do now plz help me
Click to expand...
Click to collapse
Did you able to go in recovery ?
If yes, then flesh you ROM there
If no, so download Windroid toolkot or skipsoft android toolkit and flesh your recovery.

Plush suthar said:
Did you able to go in recovery ?
If yes, then flesh you ROM there
If no, so download Windroid toolkot or skipsoft android toolkit and flesh your recovery.
Click to expand...
Click to collapse
I dont hav pc at the moment . My phn was starting in boot loop some days ago but now it is not starting . It starts when i put it in charge but in bootloop only. I hav aan xtra phone . Plx help if yu understood my prblm...

Win8.1 wont recognize phone

So after i installed the ATT update today my phone rebooted and went straight to the CWM based recovery screen. So i decided to start fresh and i did a factory reset. Now win8.1 won't recognize my phone. I've downloaded the latest driver from LG but that didn't help. Please help! This is my only phone and i have a sick mother who might call if she needs me!

Is it in cwm still? For it to be recognized in cwm you need all the adb/SDK tools I believe
Sent from my LG-E980 using XDA Premium 4 mobile app

Yes it's still in CWM. The only other screen i can make it goto is download mode.

ok so I downloaded the adb/sdk and tried using the drivers in the google/usb driver folder and it didn't work.. so im stuck. :crying:

Might be stupid question but you didn't have plugged into comp while installing did you? Stupid question 2: did you restart computer?
Sent from my LG-E980 using XDA Premium 4 mobile app

Yes to both questions

look in device manager and find the one with a yellow ! mark next to it in universal seriel bus when phone is plugged in and assign drivers manually.

If you had phone plugged in while installing drivers you shouldn't have. Plug in, find exclamation point, find drivers manually. Probably won't work. Right click, uninstall, unplug phone, install drivers again, restart comp plug in phone should work
Sent from my LG-E980 using XDA Premium 4 mobile app