Hello!
Does anyone tried to connect gamepad to 8" version?
I have Logitech F510, which works fine on Windows and it determines on tablet. I added kl file with proper VID and PID to /system/usr/keylayout but it still doesn't work, there's no keypresses at all, not in games, not in Gamepad Tester.
Any ideas how to solve it?
I tried this gamepad on Sony Xpera U, but the phone says that device need to much power so it just disconnects it. But when connected to tabled, device have power because vibration works fine.
Related
Hi all!
Is there anybody here using USB gamepads with the Note2 ?
I'm having some difficulties: in most games (GTA3 Vice City for example) all of my USB gamepads will work for the D-pad but none of them will register the buttons, so I can move and that's all.
I've tried with a microsoft gamepad, a mini foldable gamepad (Dicota) and an unbranded simple gamepad.
BUT the Sixaxis is the only controler I have perfectly working including with Vice City when plugged to USB.
With emulators, that's the same, except for Fpse that natively recognizes all of my gamepads
I've tried apps to change the buttons values, but in vain, only the Sixaxis fully works in USB
So my question is: what USB gamepad do you have successfully and completly working with the Note 2, or is there something to to to get them fully working?
I want to play Vice city using my foldable gamepad (way smaller than any BT gamepad and just plug and play)
Hi, I've got the d855 g3, I play games on it a lot, a while back I tried using a keyboard and mouse to play gta San andreas, it sort of worked, except for the mouse which just made me keep spinning. I got a wired xbox 360 controller recently and plugged that into my phone. It worked, I tried San andreas again but I had no control of the direction I'd be looking, the camera was circling my character. So then I tried modern combat 5, it didn't work either, it just looked up, whilst all my other buttons and controls worked. Any help would be much appreciated. Thanks!
You can use Sixaxis app with a PS3 controller (Bluetooth) and it will work natively without setting up a controller profile.
Sent from my LG G3
That's not really what I meant, it's noth8ng to do with the controller profile, every controller just looks up, whether it's the mouse and keyboard or my wired xbox controller, I dint have a Sony console, so buying a dualshock would be a waste. Have you got a fix for the looking up problem?
Anyone else?
Nvm worked it out.had to enter some type of code onto a terminal emulator. Search it on xda forums if you need it.
So I bought myself today an otg cable to use it for some video game playing on my LG G3. I use a dongle to connect my (very) old PS1 controller to my phone. But when I want to play sth like Asphalt 8 or Modern Combat 5 nearly all my buttons (except the D-pad and analogs) are treated as one and the same button. I thought it was the fault of the dongle or controller so I connected another controller and got the same problem. The controllers work fine on my pc but the default mapping is somehow crazy (even in my launcher all buttons are like the same). Keyboard and mouse work fine. And my android version is 5.0 v20f. Can someone please help me.
Thank you.
I am currently using the Sixaxis app with sony ps3 dualshock controller to control my fire tv - it works great - has support for home button, mouse mode and can be customized very well.
My only problem is that, the controller will not charge no matter what - from the fire tv directly, or when connected to pc, or from a wall charger.
The only way to charge it is to reset it (via the small pinhole in the back), or connect it to ps3 - this will make it lose the pairing with the fire tv and it will start charging again. I will have to set the bluetooth address again via the SixaxisPairTool from PC to get it to pair with the fire tv again.
My first question is - does the charging work for you after you have used the SixaxisPairTool from PC?
I also have a gamestop red samurai v2 controller. This pairs and works with the fire tv without any special app. However, misses mouse control.
I went through the threads here and understand that by creating a custom keyboard.kl file we can get the behavior we want for that controller. Can that idea be used to control mouse behavior as well? Any pointers would be welcome.
Thanks.
deepasadish said:
I am currently using the Sixaxis app with sony ps3 dualshock controller to control my fire tv - it works great - has support for home button, mouse mode and can be customized very well.
My only problem is that, the controller will not charge no matter what - from the fire tv directly, or when connected to pc, or from a wall charger.
The only way to charge it is to reset it (via the small pinhole in the back), or connect it to ps3 - this will make it lose the pairing with the fire tv and it will start charging again. I will have to set the bluetooth address again via the SixaxisPairTool from PC to get it to pair with the fire tv again.
My first question is - does the charging work for you after you have used the SixaxisPairTool from PC?
I also have a gamestop red samurai v2 controller. This pairs and works with the fire tv without any special app. However, misses mouse control.
I went through the threads here and understand that by creating a custom keyboard.kl file we can get the behavior we want for that controller. Can that idea be used to control mouse behavior as well? Any pointers would be welcome.
Thanks.
Click to expand...
Click to collapse
hah, so you're here as well... I also have/had ps3 controller paired with sixaxis, but I haven't used it for a while and ATM does need to be charged with actual PS3.
So, to answer your question PS3 controller did work(charged via phone charger and xbox one usb) for me after it was paired with sixaxis for long time until eventually I stopped using it and then ran out of juice. Now it needs PS3 to charge again (maybe once), before I can reuse wall charger. Problem is, I don't have PS3 on me.
yep. the ps3 controller with sixaxis app works so beautifully with both regular apps and side loaded apps (that require mouse), it is a shame that it cannot be charged.
i have it setup such that the right analog is mouse (always in mouse mode), left analog is rew/ff/prev/next, d-pad is d-pad, L1 and R1 are left and right mouse, etc.
the problem is the sixaxis tool works only with sony ps3 controller. is there any other app like this that will do the same with any controller? thanks.
deepasadish said:
yep. the ps3 controller with sixaxis app works so beautifully with both regular apps and side loaded apps (that require mouse), it is a shame that it cannot be charged.
i have it setup such that the right analog is mouse (always in mouse mode), left analog is rew/ff/prev/next, d-pad is d-pad, L1 and R1 are left and right mouse, etc.
the problem is the sixaxis tool works only with sony ps3 controller. is there any other app like this that will do the same with any controller? thanks.
Click to expand...
Click to collapse
well there are xbox 360 and xbox one controllers "how to" here, but I haven't tried them since both somewhat requires usb cable or dongle because they are not bluetooth based. and just repeating myself here, but ps3 controller does charge using other options and NOT ps3 only. BUT if it dies, then PS3 is required to recharge because you'll have to reset it.
ok. i am not sure why the charging does not work for me though. it won't even charge from PC once the SixAxisPairTool changes the mac address.
i saw the tincore app and i am planning to try it today with my gamestop controller.
How did you configure the sixaxis controller app? Whenever I try to connect the controller it never finds it even if i have the correct bluetooth address paired.
SUCCESS with tincore app. configuration is a bit difficult due to access via the fire tv remote and due to some menu items not showing up fully. however, once configured, the gamestop red samurai v2 remote works flawlessly - for necessary buttons as well as mouse.
i cannot get it to auto apply on restart and will investigate that later. for now, i am happy . thanks.
rfarina51 said:
How did you configure the sixaxis controller app? Whenever I try to connect the controller it never finds it even if i have the correct bluetooth address paired.
Click to expand...
Click to collapse
not sure what you are missing, but you can try this:
1. start the sixaxis server in fire tv and get the bluetooth address from bottom left
2. use the SixaxisPairTool in PC to set that address on the controller (for good measure you can reset the controller first by the pinhole in the back)
3. now pressing the glass PS button on controller should pair it
hi, can I use the ps4 control with the BlackShark2? tnks. :good:
SePudrioLaMomia said:
hi, can I use the ps4 control with the BlackShark2? tnks. :good:
Click to expand...
Click to collapse
Yes and no. Ds4 works perfectly outside of shark space (the gaming mode) with zero issues.
With sharkspace enabled the ds4 looses connection and fails to reconnect untill sharkspace has been disabled/quit.
We can load sixaxis controller app from inside sharkspace, so in the future with root access (we currently don't have root) it should be usable in its gaming mode. But at present your going to have to play without one of the black sharks main selling points if you want to use your dual shock for.
This is also the case for all my 3rd party controllers, one user has claimed success with an ipega controller, but I've not got one to test, note planning on getting one.
The official controllers for the blackshark 2 are probably going to be the best option for full compatability unfortunately
Thanks bro!! I appreciate the time and dedication in the response, greetings. Maxx.-
Which controller have you guys tried? I tried my wireless controller using otg but seems like it doesn't recognize otg connection ?
Rishabh1x said:
Which controller have you guys tried? I tried my wireless controller using otg but seems like it doesn't recognize otg connection
Click to expand...
Click to collapse
I've tried a DS3, ds4, c.t.r.l and a nvidia shield bt controller, none worked inside sharkspace all worked outside.
I also manually changed the master addresses of the controllers aswell via a pc to match the blackshark2 with no success, tried various gamepad mappers also with no success.
As above there's a post on here somewhere someone recogned the i.p.e.g.a controllers work but personally I am not willing to buy one to test, maybe if someone with a legitimate blackshark2 controller would mind sharing the master bt address the controllers use we could use a pc to change our controllers (ds4 etc) to match, and maybe the blackshark would recognise our Bluetooth controllers as the official ones in sharkspace and stay connected.
That's my only other suggestion/idea untill we have Root access, and even then if they connect and they still probably won't, I dunno if there would be input issues caused as a result of the hardware not matching the software
As far as your otg controller is concerned does it connect and function as intended outside of sharkspace?
It doesn't work at all using otg. It says charging device ?
Just tried again, so my controller has two config dinput mode and xinput mode. Turns out one of them works and the other is not recognised. I think the xinput mode is what works and when I switch to it the controller works outside and inside shark space as well. Although, the button are a bit wrong but i remap them in game and i can play fortnite without any issues. I will still buy the black shark gamepad 2.0 though.
Your absolutely correct buddy thank you.
Dinput controllers such as the ds4 are not working inside sharkspace.
The nintendo switch joycons use xinput and work with the blackshark inside sharkspace. I did notice some input lag on the joycons but to be honest I wasnt playing the best game to test a controller. The switch pro controller also uses xinput so will assume that works aswell, but again not got one to test.
I have the Black Shark Gamepad 2.0, which is unfortunately a bit of a disappointment. It has some very strange aspects to it: Y button cannot be mapped in Shark Space mode, it acts as some toggle between touch screen emulation and mouse cursor mode, which I don't understand why someone would use that. It's useless to me as someone who wants it solely for emulators.
When used outside of Shark Space mode, the DPad and the lettered face buttons both register as the same thing A/B/X/Y buttons. Also, the right touchpad does not act like a stick, instead it acts like a mouse.
On top if this, there are no start, select or L3/R3 buttons. This amounts to playing in Shark Space mode leaving you 5 buttons short of a full controller and outside Shark Space to playing 8 buttons short.
I could get the master BT address for you but I am not exactly sure how to do it. Do I just need to pair it to a PC and do... what?
Has anyone tried using the Xbox 360 controllers