Okay so here's the thing. I been following XDA for a while and I never had a problem with rooting and installing roms. Yesterday we received a Samsung Galaxy Tab 3 from Sprint. I believed it's the T217S version but anyways I looked up info and found out how to root it and put a custom recovery. Everything went fine until I decided to install the Remedy Rom. Now I wasn't sure if I had to wipe anything but just to be safe I did except the SD card. After that I Installed the Remedy Rom but before I could install the Knox Remover 1.2 it had already rebooted when it rebooted it bricked on the Samsung Logo. Now I began to panic but I researched and found out running the Stock Rom from Odin would fix this little issue. After running it back to stock. I again tried to get into Recovery but this time I got a different Recovery it said no command in the background and in the top Android system recovery. I remember I installed TWRP. I'm not sure what went wrong but now I can't restore it back to how it was. I can't even get into download mode to re root it.
Can anyone help me with this dilemma?
Can no one help me with this issue?
There was a recent sprint update to this device as of a few days ago. It's possible that the older rooting and recovery may not be compatible.
You might be able to Odin back to the prior version, then try root/recovery.
cougarcougar said:
There was a recent sprint update to this device as of a few days ago. It's possible that the older rooting and recovery may not be compatible.
You might be able to Odin back to the prior version, then try root/recovery.
Click to expand...
Click to collapse
Thank you for the reply. As I said I cant access download mode anymore so how can I run Odin through it? I can still boot into the Device itself I just can't enter recovery or download mode.
Related
I'm new to Android and tried to flash a customer ROM and am now stuck in a boot loop. Any help will be appreciated and I'll try to explain myself the best I can.
1. I have a Bell Note 2 and rooted with the CF auto root process
2. I upgraded SuperSU after the root reboot and installed the reboot checker. it said i was rooted.
3. I used titanium backup to backup candy crush
4. I installed ROM Manager and installed ClockWorkMod Recovery. My Note 2 wasn't supported, but I read that i could use the international version from the list so i did that. Everything said it was successful.
5. I downloaded the DN3 Rom from the forums here and transferred to my SD card.
6. I booted into CWM Recovery and did a backup from the options there.
7. Then I chose to install a customer rom and searched for the zip file on my microSD card.
8. The DN3 splash screen came up and took me through some install screens. I chose everything for the SGH-i317M options during the install.
9. it rebooted and loops between the samsung note II splash screen the CWM recovery 6.0.4.3 screen for a second and continues to loop between the two.
I can't get to the CWM recovery screen. if i try it just keeps looping. I'm sitting in the odin mode screen now and i think i need to install a stock rom. Can anyone point me in the right direction to at least get it working? then i'll need to see what i did wrong. thanks.
So i'm in odin mode and found a stock rom to reinstall. it gets to Modem, then fails so i'm not sure if i grabbed the wrong one. I believe i can install a rom through odin now that i can get to odin mode, is that right? but i can't really find any roms around to load cause all the ones i fond are zip files. Do i need to find an MD5/tar file? and where would i find them?
Try sammobile.com
Thanks for the reply. I tried that but the share for the firmware was no good. I ended up resolving it through Keis emergency firmware update.
AntonovichNS said:
Thanks for the reply. I tried that but the share for the firmware was no good. I ended up resolving it through Keis emergency firmware update.
Click to expand...
Click to collapse
That's good you figured it out yourself...:thumbup:
That's what I was going to recommend to you...
Me 2¢®
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Merry Christmas everyone. I tried to resolve this issue my self but was unable to. I had stock 4.3 rooted and flashed MOAR. MD5 matched. Everything seemed ok but when I flashed, it was stuck on "updating apps" for over 20 min. I did a battery pull. My phone started and I was able to go to TWRP recovery. I did a cache wipe and factory reset with plans of reflashing but everything was gone, including my nandroid. I tried to flash stock firmware from http://samsung-updates.com/ it said "failed". I cannot get back into TWRP. Is there any way I can restore to 4.1.2? Or 4.3? I just want to get the phone working again. Ideally I would like to get root back but my main priority is obviously just to get the phone working. Thank you.
jeppuda said:
Merry Christmas everyone. I tried to resolve this issue my self but was unable to. I had stock 4.3 rooted and flashed MOAR. MD5 matched. Everything seemed ok but when I flashed, it was stuck on "updating apps" for over 20 min. I did a battery pull. My phone started and I was able to go to TWRP recovery. I did a cache wipe and factory reset with plans of reflashing but everything was gone, including my nandroid. I tried to flash stock firmwa.
Click to expand...
Click to collapse
I had a similar bad expreience with updating my rooted S3,
to recover your phone try to get md5 recovery room and install it using odin, try to get the one that called recovery (runs stock 4.0.4) then you can update by Kies to 4.3.
If stock means the Samsung update you need to flash the 4.3 firmware. If stock means the de-Knoxed version from here, I would start by flashing a new recovery image then reinstalling the de-Knoxed one.
Can you not get into any recovery at all?
mjkubba said:
I had a similar bad expreience with updating my rooted S3,
to recover your phone try to get md5 recovery room and install it using odin, try to get the one that called recovery (runs stock 4.0.4) then you can update by Kies to 4.3.
Click to expand...
Click to collapse
MD5 recovery room (or rom I googled both)? I could not find it. I'm sorry i have never done this before...could you post the link for it?
Kevets said:
If stock means the Samsung update you need to flash the 4.3 firmware. If stock means the de-Knoxed version from here, I would start by flashing a new recovery image then reinstalling the de-Knoxed one.
Can you not get into any recovery at all?
Click to expand...
Click to collapse
When I press the volume up, home and power button it says "firmware upgrade encountered an issue. Please select recovery mode in kies and try again."
I installed the de-knoxed version..I would like to go back to the de-knoxed version if possible. Is there a way to flash new recovery image through ODIN...again, I'm not very confident in my abilities right now and don't want to flash anything to make it worse. Would it be possible to send me a link with what to flash. Thank you
Sorry I meant rom not room, but youv still can get it from the dev "room" forums. I got it from there.
sorry I cant post links here yet, i dont have the enough posts, but google "unroot sprint galaxy s3" it's one of he first links and once you get the md5 file you can use it with Odin, it's a simple process.
fixed it
Fixed it, got to keep root also. Flashed a new recovery image through ODIN (link for recovery in case anyone else needs it: http://forum.xda-developers.com/showthread.php?p=38079994). Then flashed ROM. Thanks for your help guys.
I tried to update my samasung s3 and after I did it will only boot to recovery. I tried to us ODIN but everytime it just goes to failed. I have used the pda and it just errors out. I also tried to mount it in revocery and that fails. ODIN shows it connected when I enter download mode. I think parmissions is messed up too but I don't know. Thanks
cool_kyle_3000 said:
I tried to update my samasung s3 and after I did it will only boot to recovery. I tried to us ODIN but everytime it just goes to failed. I have used the pda and it just errors out. I also tried to mount it in revocery and that fails. ODIN shows it connected when I enter download mode. I think parmissions is messed up too but I don't know. Thanks
Click to expand...
Click to collapse
More details, what did you try to update to? Did you update to 4.3 prior to this problem?
yes i was on the lastest att software then went to update and now it won't boot past recovery mode. I have rooted and done custom roms in the past no problem. At this time of updating phone was bone stock with no root. I was trying to upgrade to Android 4.4 KitKat but didn't know there were different models of the S3 so I tried to install from sd card the incorrect rom. Tried the correct rom and still got an error.
I followed this tutorial http://true-android.blogspot.com/2013/12/android-442-kitkat-slimkat-rom-for-at.html but selected the wrong phone the i9300 and tried to install the wrong kitkat. Then I found the link above for the att S3 and followed it and still got an error. I feel the error is from trying to install the wrong rom a couple of times. Not it WILL NOT load past clockwork recovery
By updating to stock AT&T ROM, it would have loaded the latest bootloader onto your phone. You can't use desktop Odin to revert to stock as AT&T never released a complete stock 4.3 ROM.
Do you have the latest CWM or TWRP on your phone? If you do, you could try and do a full wipe and install a custom ROM.
My phone was 100% screwed. There was NO saving it. I did EVERYTHING that I could. So I just took it back to BestBuy and they said phone is no good and agreed to give me a new one. Just waiting on it to come in the mail.
Hello,
I'm sure there are many threads on about what I'm about to asked but I am a noob and I don't know what to do!!
I tried to flash cm11 to my I747 last night but it failed. So I tried to flash my recovery and it failed at first but second time around it was successful. Only thing is that when it booted, it got stuck on AT&T splash. I left it for about 15-20 minutes but nothing happened. Wasn't sure if my screen was going to burn the image so I turned it off and removed the battery. I have been doing research on how to recover but I want to make sure I do everything correct so I can at least go back to stock.
If there is anyone out there that can please give me some help I would greatly appreciate it!
Thanks!!
Is this fixable?
loc626 said:
Hello,
I'm sure there are many threads on about what I'm about to asked but I am a noob and I don't know what to do!!
I tried to flash cm11 to my I747 last night but it failed. So I tried to flash my recovery and it failed at first but second time around it was successful. Only thing is that when it booted, it got stuck on AT&T splash. I left it for about 15-20 minutes but nothing happened. Wasn't sure if my screen was going to burn the image so I turned it off and removed the battery. I have been doing research on how to recover but I want to make sure I do everything correct so I can at least go back to stock.
If there is anyone out there that can please give me some help I would greatly appreciate it!
Thanks!!
Is this fixable?
Click to expand...
Click to collapse
\
Yeah. Should be fixable. First, can you try booting to recovery and doing a wipe/reset? I presume you have custom recovery? If this doesn't work, then you can try flashing a complete compatible stock restore image via recovery to get the phone working or flash a custom ROM? What Android version were you on prior to the attempt to flash CM? This would let us know what stock version to revert to.
I was running 4.3 before trying to flash the custom rom. I tried flash the stock rom last night using Odin, but it the flash failed on me twice. I also noticed that the micro sd I had in my cell is now completely dead. When I plug it into my pc it does not show up. I think it still shows up in recovery but it doesnt seem to be working. Im worried about sticking another card in and for some unknown reason it going dead too.
I only found a flash for 4.1.1 as far as stock rom goes.
loc626 said:
I was running 4.3 before trying to flash the custom rom. I tried flash the stock rom last night using Odin, but it the flash failed on me twice. I also noticed that the micro sd I had in my cell is now completely dead. When I plug it into my pc it does not show up. I think it still shows up in recovery but it doesnt seem to be working. Im worried about sticking another card in and for some unknown reason it going dead too.
I only found a flash for 4.1.1 as far as stock rom goes.
Click to expand...
Click to collapse
If you were already on 4.3, please do not try to flash 4.1.1 now otherwise you could risk bricking your phone. If you tried doing the hard wipe/reset via (custom) recovery and this did not work, you can try flashing a complete stock restore image via recovery. See the instructions in the following thread ....
http://forum.xda-developers.com/showthread.php?t=2658486
Unfortunately, you would need to load the stock restore zip to a (micro) SD card. Unless you are able to save files to your phone, there is no other way. Once you have the restore zip ready, boot your phone to recovery mode and flash. You can revert to a custom ROM once your phone is back to working normally.
I had this problem TeamWin Recovery. I put Philz recover on there and it worked fine. You will probably have to ADB philz recovery to your phone, if you chose to try Philz. This is what worked when I rooted my girlfriend's phone.
An easy way to install Philz Touch recovery would be to download and install the latest tar version for the d2lte and flash it via Odin.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte
Thanks to everyone for your help and solutions.
My co-worker, who flashed my root and recovery, was able to get it back to 4.3 stock. Unfortunately, the backup that he made before rooting did not work in recovery [twrp]. So I lost all my pics from the last two months since getting my phone.
As sad as I was that I couldn't recover the pics, I am happy to have my phone back to normal+root.
I'm not sure, but maybe it bricked from trying to flash cm11 thru twrp?! Can't really say, but the recovery did not go thru either.... It went thru "successfully" but after I would reboot then it would stay on ATT splash.
Oh well... all is good now. I will steer away from custom roms for now and wait until the 4.4 update comes out for my i747. Or if i get another phone later on, I can use the s3 as a lab rat.
Again, thanks to everyone!
I've searched around for this specific problem and haven't found anything that will help me. I have the SPH-L710 model through Sprint that was previously running Android 4.4.2. That version killed the battery, so I attempted to root and install a custom ROM. I have rooted before, so superSU was already on the phone. I opted to follow the rooting directions from galaxys3root.com, which uses ClockworkMod Recovery v5.5.0.4. I did that and installed superSU again via a .zip file. When I rebooted the phone, superSU kept stopping. After some frustration, I found that there was an updated superSU v2.01 that I installed via CWM. Being an idiot, I figured I would just go right ahead and trying to install the custom ROM without checking anything. I then attempted to install the Carbon ROM 4.4.4 from galaxys3root.com without first making a backup of my existing version (again, idiot). There was some sort of error, and after that point, I was unable to boot up the phone...it would display the Samsung GS3 screen and then do a continuous bootloop.
I tried finding stock ROMS, but they usually have to be loaded from the SD card rather than through ODIN, and they so far haven't been working. I have downloaded more than one that claimed to be an MD5, but they turned out not to be. My wife has the exact same phone so I thought maybe if I use CWM to save a backup of hers to my SD card, perhaps I could restore that and boot up my phone. I got a bit farther this time and boot up made it through the Samsung GS3 and various Sprint 4g screens before getting stuck on the last Samsung screen.
If I can get the phone to boot up again, I've since learned that once you update superSU, you can have it disable knox, thereby allowing me to root, and thereby allowing me to install a custom ROM, but at this point I just need to get the phone to boot up so I can use it again.
Summary:
Attempted to root using CWM v5.5.0.4
Did not properly disable Knox first and had an error loading custom ROM
Phone stuck in bootloop
Did not back up phone first but have a backup of my wife's exact same model
Used that backup and it gets stuck on very last Samsung screen
Any and all help is appreciated.
Matt
huntley said:
Summary:
Attempted to root using CWM v5.5.0.4
Did not properly disable Knox first and had an error loading custom ROM
Phone stuck in bootloop
Did not back up phone first but have a backup of my wife's exact same model
Used that backup and it gets stuck on very last Samsung screen
Any and all help is appreciated.
Matt
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2738533 <-----Odin stock ND8 rom use Desktop Odin
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/philz_touch_6.48.4-d2lte.tar.md5/ <------flash this recovery through Odin as well it gives you the option to root the stock ND8 rom under Philz settings choose option re-root(SuperSU)
6th_Hokage said:
http://forum.xda-developers.com/showthread.php?t=2738533 <-----Odin stock ND8 rom use Desktop Odin
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/philz_touch_6.48.4-d2lte.tar.md5/ <------flash this recovery through Odin as well it gives you the option to root the stock ND8 rom under Philz settings choose option re-root(SuperSU)
Click to expand...
Click to collapse
Thank you. That image worked perfectly, and the recovery is a newer version than I was trying to use earlier.
huntley said:
Thank you. That image worked perfectly, and the recovery is a newer version than I was trying to use earlier.
Click to expand...
Click to collapse
i know lol but its the best one for stock ND8 honestly