I tested the following ROMs and discovered they DO NOT support USB Audio:
AICP 3/06/14
AOSB 2/26/14
Carbon 3/02/14
CM10.2 2/01/14
CM11 3/07/14
Liquidsmooth 3/05/14
PACman 3/05/14
Slimkat 2/16/14
I can confirm that USB Audio DOES work with the GPE ROM. My understanding is that the GPE ROM is built from Sense, so I haven't encountered a single non/Sense ROM that supports USB Audio.
Has anybody had any luck with AOSP and USB Audio on the VZW HTC One?
USB audio requires support in the kernel to work. It is highly likely this support is lacking from the aosp kernel. It is completely possible that a dev could include usb audio though. I recall seeing it as not set in the config but the proper files would also need to be put into place and who knows if that would even compile properly into aosp from sense.
Sent from my One using Tapatalk
disconnecktie said:
USB audio requires support in the kernel to work. It is highly likely this support is lacking from the aosp kernel. It is completely possible that a dev could include usb audio though. I recall seeing it as not set in the config but the proper files would also need to be put into place and who knows if that would even compile properly into aosp from sense.
Sent from my One using Tapatalk
Click to expand...
Click to collapse
I tried using Lunar kernel in addition to the bundled kernel with each ROM.
I will have to check over on the Lunar thread to see if they know whether support is included in the kernel.
Interestingly, I made a little progress by flashing the latest version of the USB Audio Patcher MOD in the thread started by JackNorris. Now I get the familiar HTC One USB Audio stepping (0 or 100%, no middle steps) as well as audio being routed from the speaker.
The problem is no sound comes out of the external DAC, although it is routed away from the speaker. Basically, it is the same behavior after flashing the patch as it is in the Sense ROMs, but just no audio coming from the DAC.
I believe the issue is something missing from the Services.jar part of the framework. I am now in over my head.
Sent from my HTC6500LVW using Tapatalk 2
So on GPE roms audio works and you get output on the DAC, Sense you get stepping but no output, and AOSP stepping with patch but no output
Get the app Sound About from store and try on patched AOSP and report back plz
Sent from my HTC6500LVW using Tapatalk
Any update, im on liquid smooth and may flash back to gpe rom.
USB DACs work on CM11. The issue is that the phone doesn't automatically route all sound to the DAC like the stock ROM does.
It is there and working, but you wouldn't know it since the phone won't play sound through it. It is probably the same case with many other ROMs.
GrayTheWolf said:
USB DACs work on CM11. The issue is that the phone doesn't automatically route all sound to the DAC like the stock ROM does.
It is there and working, but you wouldn't know it since the phone won't play sound through it. It is probably the same case with many other ROMs.
Click to expand...
Click to collapse
Then how does one fix the problem and get audio out of the external dac?
coolguy71261 said:
Then how does one fix the problem and get audio out of the external dac?
Click to expand...
Click to collapse
Dunno. Going to have to talk to an expert for that.
I'm willing to do a bit of coding work to help out if needed, GPE roms are not bad at all just shouldn't be the only roms that offer usb audio.
Any update on an aosp rom with usb audio
coolguy71261 said:
Any update on an aosp rom with usb audio
Click to expand...
Click to collapse
Nope. There isn't anyone to work on this stuff anymore.
I would do it but I have no idea how to even start something like that.
Am I getting the hint that developers don't want to touch Verizon devices? still waiting on the day that the fcc forces Verizon to allow unlocked devices on their network.
coolguy71261 said:
Am I getting the hint that developers don't want to touch Verizon devices? still waiting on the day that the fcc forces Verizon to allow unlocked devices on their network.
Click to expand...
Click to collapse
We don't have many devs, and it is because of a few reasons.
1. Verizon took their sweet damn time to release the M7. They were almost 6 months late to the party.
2. Verizon blocked bootloader unlocks on day 1. This made it impossible to develop anything until s-off was achieved. So, this essentially added another month to the release date.
3. There aren't many people with an m7vzw. This is related to #1.
GrayTheWolf said:
USB DACs work on CM11. The issue is that the phone doesn't automatically route all sound to the DAC like the stock ROM does.
It is there and working, but you wouldn't know it since the phone won't play sound through it. It is probably the same case with many other ROMs.
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.woodslink.android.wiredheadphoneroutingfix
Sent from my HTC6500LVW using Tapatalk
Seems like I've tried this app, with no luck
Yeah that app didn't work.
Would mounting the dac work?
coolguy71261 said:
Would mounting the dac work?
Click to expand...
Click to collapse
Well, it isn't a drive, so don't know how you would mount a peripheral.
Does lunar kernel Support USB audio
not specifically in features, i doubt the functionality was intentionally left out though.. elemental might and there are some kernel on the international boards that do.. IMO if sound is truly important to you, switch back to sense- im enjoying aptx Bluetooth and Zero Infinitys godly audio and cant say im missing out on anything AOSP except for inferior quick settings (viper ROM has all the themeing you'll ever need
Sent from my HTC6500LVW using Tapatalk
Related
Are there any known 4.3 or 4.4 ROMs with working phone mic?
I've used CM 10.2 Stable (4.3) and Carbon Rom (4.4.2). Both work great, the only issue is that the headset is not usable for calls (low mic output). My solution for now is using the earbud/mic, but I'm curious to know if anyone has made progress on this. Aside from this, the various ROMs are near perfect for my needs.
I'm not very knowledgeable on the details of writing ROMs, but would any type of source code release from LG help developers solve this? Curious to know what the main hurdles are for the devs and what tools they need.
Thanks.
Wish I could tell ya but I don't have a headset with a mic. I'd say give AICP a try since it uses AOKP sources instead of CM. Might give ya a better outcome.
Sent from my AICP 4.4 LG-E980
Neroga said:
Wish I could tell ya but I don't have a headset with a mic. I'd say give AICP a try since it uses AOKP sources instead of CM. Might give ya a better outcome.
Sent from my AICP 4.4 LG-E980
Click to expand...
Click to collapse
Thanks for the suggestion, downloading now.
Do phone calls work fine on yours?
markusrussell225 said:
Thanks for the suggestion, downloading now.
Do phone calls work fine on yours?
Click to expand...
Click to collapse
Still no luck on a solid working phone microphone (low volume on other end). And the search continues.
Now that mid March has come around, has anyone had any good luck with a working in call microphone?
I was previously using several 4.4.2 Builds however, the need for a working phone mic was too critical for daily usage.
I'm using a 4.3 build (Slim Bean) which I believe is the only one with a working phone. The build is an unofficial beta and the only real issues are lack of microSD function, FC on Google Drive, and a few freezes here and there. Overall it's usable for my needs but would like to get back onto 4.4.2 granted the phone mic works.
Any suggestions/advice would be great. Thanks!
markusrussell225 said:
Now that mid March has come around, has anyone had any good luck with a working in call microphone?
I was previously using several 4.4.2 Builds however, the need for a working phone mic was too critical for daily usage.
I'm using a 4.3 build (Slim Bean) which I believe is the only one with a working phone. The build is an unofficial beta and the only real issues are lack of microSD function, FC on Google Drive, and a few freezes here and there. Overall it's usable for my needs but would like to get back onto 4.4.2 granted the phone mic works.
Any suggestions/advice would be great. Thanks!
Click to expand...
Click to collapse
I don't know much, plus i am still on stock but i will suggest you to ask your query and issues on particular custom ROM posts. i have seen people getting response faster and if in case there is a bug, high chances that developer of that particular ROM can fix it :thumbup:
Sent from my LG-E988 using xda app-developers app
ja.andro said:
I don't know much, plus i am still on stock but i will suggest you to ask your query and issues on particular custom ROM posts. i have seen people getting response faster and if in case there is a bug, high chances that developer of that particular ROM can fix it :thumbup:
Sent from my LG-E988 using xda app-developers app
Click to expand...
Click to collapse
Thanks. I ask because this is a problem has existed on all known roms since 4.3.1 for the E980 on ATT. Never been able to get a straight answer anywhere so I figure I would generically post it. I have reached out to some devs but not luck.
Any success on your searching?
thureos said:
Any success on your searching?
Click to expand...
Click to collapse
---
Here is a manual fix for the in call mic from JustinNL on XDA:
Step 1:
download a "build.prop editor app", I used: https://play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor
Step 2:
Modify these 2 specs in the build prop editor
persist.audio.handset.mic.type=digital --> replace digital with analog
persist.audio.dualmic.config=endfire -- replace endfire with false
Since i changed it i haven't had any complaints so far but flashing to new nightly makes it revert again, keep that in mind."
Been working great for myself and others.
markusrussell225 said:
---
Here is a manual fix for the in call mic from JustinNL on XDA:
Step 1:
download a "build.prop editor app", I used: https://play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor
Step 2:
Modify these 2 specs in the build prop editor
persist.audio.handset.mic.type=digital --> replace digital with analog
persist.audio.dualmic.config=endfire -- replace endfire with false
Since i changed it i haven't had any complaints so far but flashing to new nightly makes it revert again, keep that in mind."
Been working great for myself and others.
Click to expand...
Click to collapse
I saw that solution but I went back to rooted and debloated stock, I am very pleased with speed and stability.
Thanks
i've made the edits suggested on that post and still get the same issue...i dont remember having this issue before but i thnk youre right and the previous roms werent 4.4...oh well i live on the phone for work so back to stock for me. for now i guess...wanting a new phone anyways, hope we get the g pro 2 or g3 soon
Hi, I'm planning on getting a Bluetooth headset that has apt-x but I'm not sure how to confirm if the rom I use allows it. It seems like the stock roms do support it but I'd like to stay on kitkat if possible (although It seems Bluetooth is a bit weird) I'm using the beanstalk rom right now but I can't figure out how to check support.
IMHO Its not the Rom but your BT Antenna that allows for it. This is built into S4 but not in S3. At least not to my knowledge. Now some Kernel developer may try to bring it over.
Perseus71 said:
IMHO Its not the Rom but your BT Antenna that allows for it. This is built into S4 but not in S3. At least not to my knowledge. Now some Kernel developer may try to bring it over.
Click to expand...
Click to collapse
Odd, googling for the S3 tells me that the rom is supported. I think I even got an xda thread discussing it. Is it really not?
Hi All,
I really need the MHL function of the Note 2 to be connected to TV's HDMI. But I cannot find any custom ROM supporting it.
I tried the CM11, SlimKat, ... None of them has MHL. (well it's weird that SlimKat on Sprint Galaxy S3 supporting MHL, but Note 2 version doesn't)
I'll appreciate if anyone can give some idea on this issue. Just any CUSTOM (not stock) 4.4+ ROM having the MHL support.
Thanks.
taller238 said:
Hi All,
I really need the MHL function of the Note 2 to be connected to TV's HDMI. But I cannot find any custom ROM supporting it.
I tried the CM11, SlimKat, ... None of them has MHL. (well it's weird that SlimKat on Sprint Galaxy S3 supporting MHL, but Note 2 version doesn't)
I'll appreciate if anyone can give some idea on this issue. Just any CUSTOM (not stock) 4.4+ ROM having the MHL support.
Thanks.
Click to expand...
Click to collapse
Hi,
MHL function is available only in Stock based custom ROMs. Eg, Omni ROM.
Thank you for the reply.
Since the Omni Rom thread had been closed, can you advice here what are the advantages of the Omni Rom, now that it's stock-based? Or why not just use the stock ROM?
And is there any other Stock based ROM with good reputation? In fact I only care the stock functions like MHL, PEN, ...
Thanks again.
mpadhu said:
Hi,
MHL function is available only in Stock based custom ROMs. Eg, Omni ROM.
Click to expand...
Click to collapse
Well the OmniROM thread said it doesn't support MHL since it's not the TouchWiz based Rom.
http://forum.xda-developers.com/showthread.php?t=2487526&page=484
What is what then? Please advice. Thanks.
mpadhu said:
Hi,
MHL function is available only in Stock based custom ROMs. Eg, Omni ROM.
Click to expand...
Click to collapse
Moved out of dev discussion to Q&A. @taller238, please read the section guidelines for dev discussion here: http://forum.xda-developers.com/showthread.php?t=2017367
Take care
Gary
mpadhu said:
Hi,
MHL function is available only in Stock based custom ROMs. Eg, Omni ROM.
Click to expand...
Click to collapse
I have no clue what makes you think Omni is a stock based rom. Omni is an aosp based rom. Stock based roms are based off of touchwiz which will have mhl/hdmi along with full spen functions.
So for the l900 you would need to use rwilcos stock based rom, Alliance, or Community rom.
Sent from my XT1045 using XDA Premium 4 mobile app
taller238 said:
Well the OmniROM thread said it doesn't support MHL since it's not the TouchWiz based Rom.
http://forum.xda-developers.com/showthread.php?t=2487526&page=484
What is what then? Please advice. Thanks.
Click to expand...
Click to collapse
It's Omega ROM. Sorry, got confused between the names Omni and Omega and typed as Omni.
You can check Omega ROM. Google it. I guess they have their own website.
mpadhu said:
It's Omega ROM. Sorry, got confused between the names Omni and Omega and typed as Omni.
You can check Omega ROM. Google it. I guess they have their own website.
Click to expand...
Click to collapse
Thanks but seems like the Omega rom only supports N7100, not Sprint SPH-L900.
There are many cases the Sprint version Note 2 was excluded from the custom rom developing.
Interesting but regretful.
taller238 said:
Hi All,
I really need the MHL function of the Note 2 to be connected to TV's HDMI. But I cannot find any custom ROM supporting it.
I tried the CM11, SlimKat, ... None of them has MHL. (well it's weird that SlimKat on Sprint Galaxy S3 supporting MHL, but Note 2 version doesn't)
I'll appreciate if anyone can give some idea on this issue. Just any CUSTOM (not stock) 4.4+ ROM having the MHL support.
Thanks.
Click to expand...
Click to collapse
my device is Note 2 LTE t0lte
and I have similar needs for MHL too.
I tried slimKat 4.4.4 build 9.0.................................it doesnt work
liquidsmooth LS-LP-v4.0..............................................doesnt work
omni-4.4.4-NIGHTLY..........................................................doesnt work
[5.0.2][OFFICIAL]Team UB ROM...............................doesnt work
[4.4.2] AllianceRom..............................................................doesnt work
[SaberMod] CM12+ Unofficial Build
(this one states it supports HDMI)...............still doesnt work
I know 100% that Alliance and Community rom both work with mhl/hdmi output on the l900 (sprint note 2). You can also try DN3 which also works. I use this feature all the time. I use the media dock and have hdmi, keyboard, and mouse connected. No aosp rom has mhl compatibility!!
If you are having issues with touchwiz roms and mhl these are a few things to check.
1. Mhl adapter needs to be designed specifically for Samsung device
2. You need external power supply for mhl to work (needs to be 2 amp output)
When you connect to your device and TV device should display hdmi connected.
Sent from my XT1045 using XDA Premium 4 mobile app
Can you please give a working link for the "Alliance and Community rom" of SPH-L900?
I did search hard but didn't even get a download place for the Sprint version Note II.
Please note we better say a ROM of 4.4+, instead of any JB or older version, which was too old to be used.
Thanks.
jlmancuso said:
I know 100% that Alliance and Community rom both work with mhl/hdmi output on the l900 (sprint note 2). You can also try DN3 which also works. I use this feature all the time. I use the media dock and have hdmi, keyboard, and mouse connected. No aosp rom has mhl compatibility!!
If you are having issues with touchwiz roms and mhl these are a few things to check.
1. Mhl adapter needs to be designed specifically for Samsung device
2. You need external power supply for mhl to work (needs to be 2 amp output)
When you connect to your device and TV device should display hdmi connected.
Sent from my XT1045 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you for the list that complete. I eventually found someone on the same boat but more diligent
But I felt more pathetic with your info. It's really ridiculous to exclude MHL out of the custom ROMs.
Just saw another mention of "Alliance and Community rom", and asked again for the source. Let's see if there's any surprise.
derss123 said:
my device is Note 2 LTE t0lte
and I have similar needs for MHL too.
I tried slimKat 4.4.4 build 9.0.................................it doesnt work
liquidsmooth LS-LP-v4.0..............................................doesnt work
omni-4.4.4-NIGHTLY..........................................................doesnt work
[5.0.2][OFFICIAL]Team UB ROM...............................doesnt work
[4.4.2] AllianceRom..............................................................doesnt work
[SaberMod] CM12+ Unofficial Build
(this one states it supports HDMI)...............still doesnt work
Click to expand...
Click to collapse
taller238 said:
Thank you for the list that complete. I eventually found someone on the same boat but more diligent
But I felt more pathetic with your info. It's really ridiculous to exclude MHL out of the custom ROMs.
Just saw another mention of "Alliance and Community rom", and asked again for the source. Let's see if there's any surprise.
Click to expand...
Click to collapse
The reason custom (aosp) roms dont have mhl is because Samsung wont release the source code for the drivers. Without drivers things wont work.
Latest community download
https://www.androidfilehost.com/?fid=23622183712473089
Sent from my XT1045 using XDA Premium 4 mobile app
jlmancuso said:
If you are having issues with touchwiz roms and mhl these are a few things to check.
1. Mhl adapter needs to be designed specifically for Samsung device
2. You need external power supply for mhl to work (needs to be 2 amp output)
When you connect to your device and TV device should display hdmi connected.
Sent from my XT1045 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hello, thank you for your reply :good:
I'm sure my mhl adaptor is working ok as i could connect to TV on stock rom no trouble at all.
In testing hdmi mhl output on Alliance rom, i could see the screen being projected to TV, however it only lasted for a few seconds, and then my phone got frozen while tv screen was going black/blank. I can't figure out what went wrong........
Also, when trying those different roms, i always did a full wipe......
---------- Post added at 08:57 PM ---------- Previous post was at 08:45 PM ----------
taller238 said:
Thank you for the list that complete. I eventually found someone on the same boat but more diligent
But I felt more pathetic with your info. It's really ridiculous to exclude MHL out of the custom ROMs.
Just saw another mention of "Alliance and Community rom", and asked again for the source. Let's see if there's any surprise.
Click to expand...
Click to collapse
I know how you feel.......i myself googled a lot too.....but it's just not going anywhere......very frustrating indeed.
I even tried miracast function. In cm roms, i think it's called cast screen. But still no good luck.
With stock rom, it only works when it's not rooted.
If rooted, then hdcp has to be disabled. I tried but in vain.
With cm12 roms, i googled and found out it's not supported yet.
With cm11, there seems to be a fix for cast screen. But it still didn't work........
Thank you so much for the link.
The MHL works on this version!
But seems like the sPen function not working, since there's no "copy/cut" option pops up when I clipped an enclosed area from the screen.
Do I have to use TW native launcher / web browser (I'm using Nova Launcher and Dolphin browser) to enable this function?
I wish it's just a matter of configuration, since I assume either sPen or MHL shall be wholly supported by this TW based ROM.
I'll appreciate someone can verify this sPen symptom, and give some advice.
Thanks.
jlmancuso said:
The reason custom (aosp) roms dont have mhl is because Samsung wont release the source code for the drivers. Without drivers things wont work.
Latest community download
https://www.androidfilehost.com/?fid=23622183712473089
Sent from my XT1045 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
taller238 said:
Thank you so much for the link.
The MHL works on this version!
But seems like the sPen function not working, since there's no "copy/cut" option pops up when I clipped an enclosed area from the screen.
Do I have to use TW native launcher / web browser (I'm using Nova Launcher and Dolphin browser) to enable this function?
I wish it's just a matter of configuration, since I assume either sPen or MHL shall be wholly supported by this TW based ROM.
I'll appreciate someone can verify this sPen symptom, and give some advice.
Thanks.
Click to expand...
Click to collapse
It is a give and take thing. Community is not a stock n2 rom. It is actually parts of n2, n3, and s5. The only thing left to fix on Community is the clipping function for the spen. Only I have quit working on Touchwiz roms.
So long answer short. It is a rom issue not a problem with user setup.
Sent from my XT1045 using XDA Premium 4 mobile app
Thank you for the clarification. I didn't use sPen that much and just need to configure right.
jlmancuso said:
It is a give and take thing. Community is not a stock n2 rom. It is actually parts of n2, n3, and s5. The only thing left to fix on Community is the clipping function for the spen. Only I have quit working on Touchwiz roms.
So long answer short. It is a rom issue not a problem with user setup.
Sent from my XT1045 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Delete. Found my answer.
butwhydoitalk2u said:
Delete. Found my answer.
Click to expand...
Click to collapse
What was your solution?
I am also looking for a car based rom but don't want to pay to get timur's
I bought into the timurs but when I tried to go back to stock - I cleared the rom and wiped the tablet to go to stock- I wiped everything and bricked the tablet. My computer didnt recognize the tablet in bootloader or twrp mode...Oh well. I am waiting for my other tablet to arrive to see if I can finally do it. As far as the question"...to timur or not to timur?" I couldn't tell you but the biggest complaint that I see while using the experimentalx is the recognition of the dac Which in my application makes the world of difference since everything is going to go through the dac - as far as audio. Another cool feature is its ability to recognize the reverse input through my camera. It switches to your backup camera app once the kernel detects power on the camera. Again, I have yet to test ANY of it out. Sorry I couldnt help anymore. it really all depends on what features you are looking for. Just as a comparision, I am gonna run the following: dac, 2 hubs, fm, back up cam, extra usb extension, flash drive for music, flash drive for video, and mic. Still trying to see if I can find a usb fan that is controllable via an app If it plugged into one of the hubs. Good luck...let me know what works for you.
Let's hope someone could share the Timur Kernel.
He said with his words that it is completely legit to share his source and kernel. He was just not willing to do it.
As the nexus is getting old. People who would like to donate has already done.
BTW, can you please share if you can get OTG & Charge to work together under elementalX without having to re-plug the mini-usb everytime?
Thanks.
There is a torrent for the 2012 version:
https://thepiratebay.se/torrent/11774515/Timur_acute_s_USBROM_and_Kernels_for_Nexus_7_2012
Hoka-Hey said:
There is a torrent for the 2012 version:
https://thepiratebay.se/torrent/11774515/Timur_acute_s_USBROM_and_Kernels_for_Nexus_7_2012
Click to expand...
Click to collapse
Wait that's for 2012 nexus though thought it was 2013 flo edition... Close call
@ butwhydoitalk2u: can you please share the Timur USB rom and kernel with us so we can experiment too?
This is my first phone with the capabilities to flash custom Roms and so far I've flashed most of the Roms available for the m9. I have my favorites.
But I've noticed that cyanogen mod has a huge following. What is it that makes this rom so famous? What are the pros and con's of the rom?
I saw that the beta version is out and would love to hear opinions on the rom to buy some time until a stable version is ready for me to test drive.
Thanks for your input
Sent from my HTC One M9 using XDA Free mobile app
Cyanogen mod is among one of the oldest full-featured android ROMS available. It has survived for so long since it is highly customizable, fast, stable, and gets good battery life. I'd definitely give it a go if you are curious about it. If you don't like it you can always restore from a backup or flash another rom.
I think a major factor in choosing to use it is that it's completely "de-bloated". There is no OEM crap taking up space and wasting battery.
Sure, most of us disable those things or uninstall them with Ti Backup, but it's just so much cleaner never to have had them.
It's really quick, and since it's based on AOSP, a lot more Xposed modules and customizers wwork with it (Like GravityBox, for example).
You should definitely try it out if you're curious. You'll probably like it.
The only downside is that the nightly builds and betas can be slightly dodgy sometimes (though the beta that's out is pretty good, minus the camera) and that since it's closer to a Vanilla android feel than OEM skins, you usually lose some of the device's unique software functionality. (Sometimes these can be re-downloaded from the play store, other times they just won't work)
Make a nandroid (or whatever we call these now. TWRP Backup?) and give it a go!
Thanks. I found this earlier explaining a little. http://wiki.cyanogenmod.org/w/Main_Page
I still appreciate your opinions and would love to hear more. If there is anything more to add. These guys explained it well.
bigp951 said:
Thanks. I found this earlier explaining a little. http://wiki.cyanogenmod.org/w/Main_Page
I still appreciate your opinions and would love to hear more. If there is anything more to add. These guys explained it well.
Click to expand...
Click to collapse
If you have any questions or I can help with anything just let me know!
On HTC phone I don't use CM nor MIUI, the last time I did was on Nexus 1 years ago.
Though it should be good on samsung and LG + sense 7 port from xpirt
Thanks. @vivremetrique I recognize your name from the cm rom post. Are you one of the devs of the rom? I plan on flashing it soon. But I am going to wait for the camera to get fixed first. Also, will there be any sound mods like viper4android or just an amp?
I'm not sure if its the current rom I'm on or the firmware but it seems like my music isn't as loud as it was a few weeks ago.
Sent from my HTC One M9 using XDA Free mobile app
bigp951 said:
Thanks. @vivremetrique I recognize your name from the cm rom post. Are you one of the devs of the rom? I plan on flashing it soon. But I am going to wait for the camera to get fixed first. Also, will there be any sound mods like viper4android or just an amp?
I'm not sure if its the current rom I'm on or the firmware but it seems like my music isn't as loud as it was a few weeks ago.
Sent from my HTC One M9 using XDA Free mobile app
Click to expand...
Click to collapse
No, I'm not one of the devs, just an "enthusiastic" tester and user
I'm really not sure about the sound mods, but I'd imagine that eventually v4a would work properly.
(If it doesn't already, this thread suggests that someone was able to get it working by changing SELinux mode to permissive, but it doesn't seem to have worked for everyone. You can always try it!)
I haven't updated my firmware recently so I'm not sure if an update may have affected sound volume (I'm not sure if you've updated your firmware either, but the CM Beta only works on 1.32.x so far anyway )
vivremetrique said:
No, I'm not one of the devs, just an "enthusiastic" tester and user
I'm really not sure about the sound mods, but I'd imagine that eventually v4a would work properly.
(If it doesn't already, this thread suggests that someone was able to get it working by changing SELinux mode to permissive, but it doesn't seem to have worked for everyone. You can always try it!)
I haven't updated my firmware recently so I'm not sure if an update may have affected sound volume (I'm not sure if you've updated your firmware either, but the CM Beta only works on 1.32.x so far anyway )
Click to expand...
Click to collapse
Thanks for the link. I didn't know that v4a was actually in the play store. I've only seen it in a custom rom. I actually have the selinux permission app already so definitely worth the try.
I'm on the new 2.8 developers edition firmware right now. But being as flashing firmware is so easy I can switch anytime. Am definitely going to follow the progress of cm and when it looks like most of the bugs are worked out I'll give it a try. Can't really run a beta on my phone because it is my daily driver.
You're welcome!
Keep in mind that you might need to be S-Off in order to tinker with firmware beyond updating it
(On some devices you need S-Off to downgrade or flash unsigned)
I am s-off thanks. Coming from my locked bootloader vzw s3 to this has been amazing. So I've unlocked everything to allow me full flexibility and freedom to customize as I see fit. I may never buy a carrier phone again.
Sent from my HTC One M9 using XDA Free mobile app