I stucked into a weird situation where my HAM(having firmware B221 as said there) stucked in bootloop. What I did was
1. Tried to uInlock my bootloader using this url. --> http://forum.xda-developers.com/showthread.php?t=2642403.
2. Then flashed the HYD52ROM V5 using TWRP. and after that it got stucked to bootloop.
Now I want to go back to stock rom. I have downloaded joe stones relock package, the main problem is that adb is unable to find my device. I had stock update.app package in the external card root. But first I want adb to reconize my device.
Kindly help.
Its urgent.
If you want adb to recognize your device, install your phone's drivers + HiSuite. If that doesn't work, flash stock firmware first.
Sent from my amazing Ascend P6, powered by MIUI v5.
Related
These are the steps I did & forgot to place rom.zip to sdcard & now I am stuck at the HTC Logo.
1. Unlocked bootloader.
2. Installed CWM Recovery.img
3. Installed Super Swipe from Android HD Rom 6.0 ICS
4. Went into fastboot & done Swipe directly. It erased all the data & now only stuck at HTC Logo.
I tried even
1. Reboot phone and erase cache (Not worked).
2. Install cwm & then custom rom (Not worked).
3. Relock bootloader & install stock rom (Not worked).
4. Installed latest RUU directly (Not worked as my phone has 1.28.720.10)
5. ADB shell mount /sdcard & adb push rom.zip /sdcard (Not worked).
6. Even factory Reset didn't work.
Developers plzz guide needed.....
me too
i'm having the same problem, tried everything... i just updated my rom OTA 1.29.707..... then try to install some roms, then now i'm stock at htc logo...
the last thing i remember is i did a superswipe, then the rest is history...
i can't downgrade either... i guess the solution is to wait for ruu of hTC_Asia_WWE_1.29.707.10 so i can install ruu that will not make error 140...
is there any solution?? please help...
Install the latest CWM recovery with USB storage auto-mounted. Put in any custom rom that you like and install it. Don't forget to flash the boot.img that comes with the custom rom.
To be back on stock, yes you need to wait for the RUU.
urgent help
when i lost the network signal,read from forums that i need to make unlock and as you know install the new custom rom's so i did many times, but still no phone signal,i am living in moscow but phone intended from Poland. Then when i was trying the other roms in the recovery mode wiped away sdcard and system etc.now phone just stuck HTC logo.
Is there a solution or i need to buy a new phone?
best regards.
Saldiray Yildiray Cakmak
i made a thread about this guys.. just follow the instructions
http://forum.xda-developers.com/showthread.php?t=1692681
i unlocked my phone and installed b510 and i install twrp and i tried to make awipe from twrp and tick on format system and now the phone on huawei logo i can get to twrp but how can i revet from twrp to stock recovery to flash b125 again
osamamattar said:
i unlocked my phone and installed b510 and i install twrp and i tried to make awipe from twrp and tick on format system and now the phone on huawei logo i can get to twrp but how can i revet from twrp to stock recovery to flash b125 again
Click to expand...
Click to collapse
Since you can still get to TWRP, flash B510 again. That's a start to get you out of pickle.
After that search here on how to install stock recovery and then flash B125.
You have TWPR, try to flash that: http://forum.xda-developers.com/showthread.php?t=2748189
stuck in logo
i've unlock bootloader n stuck in logo
so i tried to relock from http://forum.xda-developers.com/showthread.php?t=2642403
and my HAM back to normal again
i hope this will help
hi guys..
after flashing b510 i tried to edit the build.prop..
after that i got stuck in huawei bootlogo (with the powered by android screen)..
then i entered the twrp 2.7.0.0 recovery..
there i deleted accidently the OS :crying::crying:
now i can't do anything..
i can't reach the bootloader via pc (due to the non existent OS and debug mode)
even i can't install another OS via TWRP because there is a fail (even the b510 won't install)..
what can i do!!! plz help cause i need my phone!!
Hello,
I would like to ask you to give me an advice to solve my problem.
Where I was:
1. Ascend P6 with TWRP 2.7.0.0 and OmniROM 4.4.3. Phone was functional.
What I have done:
1. In TWRP I flashed TWRP 2.7.1.0 zip - it went OK, no errors etc. Reboot. System was OK.
2. Turned off mobile and again booted into TWRP (it showed as I expected 2.7.1.0).
3. Then I tried to install new OmniRom 4.4.4. - I followed the instructions in the thread how to install it (not just update!). Everything seems to be OK. Then wipe cache/dalvik. Tried to reboot, but mobile "told" me, that it is not rooted and asked me, if I want to root it. I confirmed it, but right after I made the confirmation, mobile rebooted.
4. Mobile stuck on Huawei Ascend logo.
What I can I do now:
1. I am able to boot into TWRP 2.7.1.0. I have omni 4.4.4, Gapps 4.4.2 and SuperSu 2.00 on my external SD card. I tried to wipe and install the ROM 2 or 3 times, but everytime the result is the same - instalation is succesfull, reboot and mobile will stuck on Ascend logo.
2. adb shows device offline. When I connect the phone to PC while beeing in TWRP, adb shows "device recovery"
I have no idea what is the cause of this problem - propably I shouldnt update TWRP to 2.7.1.0 version through flashing the .zip file, I dont know ....
Any suggestions?
p.s. sorry for the english
krizko1979 said:
Hello,
I would like to ask you to give me an advice to solve my problem.
Where I was:
1. Ascend P6 with TWRP 2.7.0.0 and OmniROM 4.4.3. Phone was functional.
What I have done:
1. In TWRP I flashed TWRP 2.7.1.0 zip - it went OK, no errors etc. Reboot. System was OK.
2. Turned off mobile and again booted into TWRP (it showed as I expected 2.7.1.0).
3. Then I tried to install new OmniRom 4.4.4. - I followed the instructions in the thread how to install it (not just update!). Everything seems to be OK. Then wipe cache/dalvik. Tried to reboot, but mobile "told" me, that it is not rooted and asked me, if I want to root it. I confirmed it, but right after I made the confirmation, mobile rebooted.
4. Mobile stuck on Huawei Ascend logo.
What I can I do now:
1. I am able to boot into TWRP 2.7.1.0. I have omni 4.4.4, Gapps 4.4.2 and SuperSu 2.00 on my external SD card. I tried to wipe and install the ROM 2 or 3 times, but everytime the result is the same - instalation is succesfull, reboot and mobile will stuck on Ascend logo.
2. adb shows device offline. When I connect the phone to PC while beeing in TWRP, adb shows "device recovery"
I have no idea what is the cause of this problem - propably I shouldnt update TWRP to 2.7.1.0 version through flashing the .zip file, I dont know ....
Any suggestions?
p.s. sorry for the english
Click to expand...
Click to collapse
I'm having the exact same problem... Trying everything as we speak...
Whookid said:
I'm having the exact same problem... Trying everything as we speak...
Click to expand...
Click to collapse
I cant even boot in TWRP.. the logo of TW flashes from time to time but cant go in.. any suggestions?
Here's what I did to fix my issue:
- Restored original B510 recovery (flash recovery.img and boot.img from the original B510 rom, it's inside the TWRP thread...)
- Added the B132 update to my external SD card. (Create a folder /dload/ and add the UPDATE.APP file to it)
- Started the phone in recovery mode by by pressing volume up + volume down + power
- Updated to B510 again via update.zip in the /dload/ folder
After that I did not install TWRP or any other custom rom as B510 is the perfect ROM for me atm anyway...
Hi, I tried to flash new firmware, so I placed UPDATE.APP in dload folder on sdcard, reboot in TWRP, wiped everything except ext_sd (because phone wouldn't update from update menu in settings menu),and tried to enter bootloader mode,but phone stucks at HUAWEI logo... tried to boot to bootloader from TWRP,same thing happens... like bootloader is corupted,it won't start... all I have now is TWRP... is there some way to start bootloader and to flash firmware?
you have to choose a custom rom (they can be installed/flashed by twrp)..
original firmware can only be installed by stock recovery..
Gesendet von HUAWEI Ascend P7-L10 B602
Try to install custom Rom with TWRP or if you can now revert to stock recovery then you could install official frimware. Official frimware you install only with stock recovery.
Sent from my HUAWEI P6-U06 using XDA app
I have installed custom ROM in meantime, now I am trying to revert to stock recovery, in order to get bootloader and to get back to stock fw... I have problems with fastboot- it won't see device, while adb sees it
I have sucedeed,driver was problem, it was installed correctly, but I had to reinstall it to make everything work... tnx
smfilip said:
Hi, I tried to flash new firmware, so I placed UPDATE.APP in dload folder on sdcard, reboot in TWRP, wiped everything except ext_sd (because phone wouldn't update from update menu in settings menu),and tried to enter bootloader mode,but phone stucks at HUAWEI logo... tried to boot to bootloader from TWRP,same thing happens... like bootloader is corupted,it won't start... all I have now is TWRP... is there some way to start bootloader and to flash firmware?
Click to expand...
Click to collapse
Eish! Big mistake. You were supposed to have first flashed stock recovery before attempting to install UPDATE.APP, so now what you need to do is to get one of the ROMS in a zip form and place it in your SD card. In TWRP advance mount your usb and copy the ROM zip to your SD card, then follow the install procedure.
Hi in my micromax a1 I've installed custom recovery twrp. So after that when I get the new lollypop 5.1.1 system update notification and download it then after the phone restarts it opens in recovery mode and opens the twrp. I've also try to flash the update.zip from my internal memory path but its not flashing and showing some error message. So I've decided to go back in stock recovery. For that I went for the recovery in my stock kitkat rom in sp flash tools. But when I connect my phone it is not detecting with or without battery. What should I do now? pls help...
itsovi said:
Hi in my micromax a1 I've installed custom recovery twrp. So after that when I get the new lollypop 5.1.1 system update notification and download it then after the phone restarts it opens in recovery mode and opens the twrp. I've also try to flash the update.zip from my internal memory path but its not flashing and showing some error message. So I've decided to go back in stock recovery. For that I went for the recovery in my stock kitkat rom in sp flash tools. But when I connect my phone it is not detecting with or without battery. What should I do now? pls help...
Click to expand...
Click to collapse
Did you find any solution to this? Cuz I'm having the same problem