Related
Been seeing a lot of post about how to install OTA with a rooted stock ROM. This is by far the easiest way for people to update and not lose any data. All are done using Odin 3.07 on Windows 7 and not going to link it or how to use it lots of tutorials out that show you.
To put in Download Mode -> Vol Down + Home + Power
To Boot into Recovery -> Vol Up + Home + Power
Things needed:
ROM
CWM-Recovery
Root zip file
ROMS
NOTE: These are the FULL firmware of LH1 and NOT small OTA. This is good to have as a backup should something go wrong.
Bell
Telus
Rogers
Sasktel
CWM-Recovery
See Attached, this is an Official CWM from CWM team. If you don't want to use this use whatever recovery you want or had before.
Root: MOVE THIS TO PHONE STORAGE
Chainfire SuperSU
1.) Boot into recovery and create backup, always better to backup
2.) Unzip firmware file and you will see 2 files a dll and md5. The one we need is the md5
Im with bell so mines is -> KIES_HOME_I747MVLALH1_I747MOYCALH1_20120814.100513_REV04_user_low_ship.tar.md5
3.) Put phone into download mode
4.) Load Odin select PDA and select the firmware file you unzipped in step 2. The MD5 file.
5.) Let the phone do its thing and do not touch it until you are at the lockscreen.
7.) Boot into download mode again and select PDA and this time select the recovery tar file
8.) Uncheck F. Reset and flash
9.) Once back on the lockscreen go into Recovery and install the CWM-SuperSU-v0.96.zip to root from phone storage.
10.) Get Triangle Away from here and reset counter.
Excellent guide with links thanks
Sent from my SGH-I747M using xda app-developers app
Any way to flash only the new modem, without reflashing the entire Rom ?
Sent from my SGH-I747
Thanks OP. But i have already flashed LH1 via ODIN. Now i want to install CWM, can you post to link to installation instructions of CWM v6.?
850T5m said:
Any way to flash only the new modem, without reflashing the entire Rom ?
Sent from my SGH-I747
Click to expand...
Click to collapse
Yes, right here.
New cwm flashable modem available here.
---------- Post added at 01:02 AM ---------- Previous post was at 12:59 AM ----------
David Dee said:
Yes, right here.
Click to expand...
Click to collapse
Lol you beat me by seconds.
Sent from my SGH-T999 using xda premium
tarick09 said:
Thanks OP. But i have already flashed LH1 via ODIN. Now i want to install CWM, can you post to link to installation instructions of CWM v6.?
Click to expand...
Click to collapse
Instructions are in his OP. I have pasted below:
7.) In Odin: Boot into download mode again and select PDA and this time select the recovery tar file (he has attached odin flashable cwm tar in the op)
8.) Uncheck F. Reset and flash
After that you will have CWM. Go to step 9 if you want to root and install SuperSU.
I already updated via Kies and of course now lost my root. If I follow this method (now, after the update) will I get root back or is there another method you guys would recommend? Thanks
#1RAGE said:
I already updated via Kies and of course now lost my root. If I follow this method (now, after the update) will I get root back or is there another method you guys would recommend? Thanks
Click to expand...
Click to collapse
You have essentially completed steps 1-5 above using Kies. Go to step 7 (6 is missing) and follow instructions to flash the CWM tar file attached in OP via ODIN and the supersu zip via CWM and you are done.
I was about to follow the video guide found in this thread: http://forum.xda-developers.com/showthread.php?t=1728824 which shows you how to root and install CWM without tripping the flash counter. Can I follow his installation instructions, but instead use the rooted stock Telus rom linked to in this thread? I assume that if i follow the guide in his thread and use the files he links to, I will end up re-flashing the stock 4.0.1 rom instead of the new 4.0.4, which I want to keep.
Plus I want to have CWM and not trip my flash counter so I dont need to bother with Triangle Away.
This is my first time rooting or flashing anything to my phone, so my apologies for my extreme n00bness. Thanks
sn0w420 said:
I was about to follow the video guide found in this thread: http://forum.xda-developers.com/showthread.php?t=1728824 which shows you how to root and install CWM without tripping the flash counter. Can I follow his installation instructions, but instead use the rooted stock Telus rom linked to in this thread? I assume that if i follow the guide in his thread and use the files he links to, I will end up re-flashing the stock 4.0.1 rom instead of the new 4.0.4, which I want to keep.
Plus I want to have CWM and not trip my flash counter so I dont need to bother with Triangle Away.
This is my first time rooting or flashing anything to my phone, so my apologies for my extreme n00bness. Thanks
Click to expand...
Click to collapse
If you use the rooted ROM in the other thread you will have that version and not the August LH1 update, remember the ones i linked are full stock firmware. Maybe someone will create a stock rooted flashable odin tar, but you really dont need it. Just flash using the above steps and use Triangle Away. Triangle Away although dangerous does no harm at all, its a simple apk file that installs like any other app, once you confirm it is displaying the correct model (our is I747M) then just hit the reset counter and let it do its thing and then you can uninstall it simple as that.
No point in waiting for someone to create a no trip counter file because that is much hard to do. Plus the only reason I think the first ones where like that was because Triangle Away did not fully support the I747M.
sn0w420 said:
I was about to follow the video guide found in this thread: http://forum.xda-developers.com/showthread.php?t=1728824 which shows you how to root and install CWM without tripping the flash counter. Can I follow his installation instructions, but instead use the rooted stock Telus rom linked to in this thread? I assume that if i follow the guide in his thread and use the files he links to, I will end up re-flashing the stock 4.0.1 rom instead of the new 4.0.4, which I want to keep.
Plus I want to have CWM and not trip my flash counter so I dont need to bother with Triangle Away.
This is my first time rooting or flashing anything to my phone, so my apologies for my extreme n00bness. Thanks
Click to expand...
Click to collapse
The thread for the no trip method referred to in that video is here. The OP in that thread is still working on root injected versions for the new Canadian firmwares, the ones currently in the OP are the old versions. He can create them quickly, I think he is just waiting for volunteers to mirror the files. Keep checking and when you see a Telus version up ending in LH1, you are good to go.
Thanks OP, that works just fine to reroot my phone and reset the trip counter!
I have a rogers Galaxy SIII if that could help anyone!
New Telus, Rogers, Bell flashable modem zip LH1
http://d-h.st/qjN
stuck on samsung screen
i did all your instructions to a t except i was using odin 3.04 and now my phone is stuck on the samsung screen i can go into dl mode and stock recovery buy no boot up can u suggest somthing for me plzz.....???
jebise101 said:
Been seeing a lot of post about how to install OTA with a rooted stock ROM. This is by far the easiest way for people to update and not lose any data. All are done using Odin 3.07 on Windows 7 and not going to link it or how to use it lots of tutorials out that show you.
To put in Download Mode -> Vol Down + Home + Power
To Boot into Recovery -> Vol Up + Home + Power
Things needed:
ROM
CWM-Recovery
Root zip file
ROMS
NOTE: These are the FULL firmware of LH1 and NOT small OTA. This is good to have as a backup should something go wrong.
Bell
Telus
Rogers
Sasktel
CWM-Recovery
See Attached, this is an Official CWM from CWM team. If you don't want to use this use whatever recovery you want or had before.
Root: MOVE THIS TO PHONE STORAGE
Chainfire SuperSU
1.) Boot into recovery and create backup, always better to backup
2.) Unzip firmware file and you will see 2 files a dll and md5. The one we need is the md5
Im with bell so mines is -> KIES_HOME_I747MVLALH1_I747MOYCALH1_20120814.100513_REV04_user_low_ship.tar.md5
3.) Put phone into download mode
4.) Load Odin select PDA and select the firmware file you unzipped in step 2. The MD5 file.
5.) Let the phone do its thing and do not touch it until you are at the lockscreen.
7.) Boot into download mode again and select PDA and this time select the recovery tar file
8.) Uncheck F. Reset and flash
9.) Once back on the lockscreen go into Recovery and install the CWM-SuperSU-v0.96.zip to root from phone storage.
10.) Get Triangle Away from here and reset counter.
Click to expand...
Click to collapse
Repeat the steps with odin 3.07?
Sent from my SGH-I747M using xda app-developers app
Repeat with odin 3.07?
Sent from my SGH-I747M using xda app-developers app
oriveradel said:
New Telus, Rogers, Bell flashable modem zip LH1
http://d-h.st/qjN
Click to expand...
Click to collapse
Anyone confirm this is a good modem to use? I'm assuming this is a cwm flashable zip right?
Sent from my SGH-I747M using xda app-developers app
---------- Post added at 04:36 PM ---------- Previous post was at 04:32 PM ----------
Nevermind. Flashed and speeds seem a lot better. I'm getting around 7mb down using h+. No LTE out here (Ancaster)
Sent from my SGH-I747M using xda app-developers app
This is my baseband version I747MVLLH1 is the flashable modem a couple posts above newer than mine?
Sent from my SGH-I747M using xda premium
A little easier guide to get root?
Hi, I made this easier a little bit. Follow the posted guide from the op
Download your FW and Odin 3.07 (and ofc sammy drivers and what not)
1.) Boot into recovery and create backup, always better to backup
2.) Unzip firmware file and you will see 2 files a dll and md5. The one we need is the md5
Im with bell so mines is -> KIES_HOME_I747MVLALH1_I747MOYCALH1_20120814.100513 _REV04_user_low_ship.tar.md5
3.) Put phone into download mode
4.) Load Odin select PDA and select the firmware file you unzipped in step 2. The MD5 file.
5.) Let the phone do its thing and do not touch it until you are at the lockscreen.
7.) Boot into download mode again and select PDA and this time select the recovery tar file
Click to expand...
Click to collapse
Then
8.) click start, wait for you to go back to lockscreen.
9.) Flash the zip attached below (through your CWM) (vol up+ power button+ home button to get to recovery)
[BOOM you have root!]
10.) get triangle away, reset flash counter.
I did not make the zip i just got it from searching around.
IMG Version:
Non-Touch: http://download2.clockworkmod.com/recoveries/recovery-clockwork-6.0.3.1-hercules.img
Touch: http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.3.1-hercules.img
Click to expand...
Click to collapse
Zip Version:
Non-Touch: http://download2.clockworkmod.com/recoveries/recovery-clockwork-6.0.3.1-hercules.zip
Touch: http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-6.0.3.1-hercules.zip
Click to expand...
Click to collapse
TAR MD5 Version: (Thanks for KRZ-2pa)
None-Touch: http://d-h.st/s3d
Touch: http://d-h.st/Xnq
Click to expand...
Click to collapse
Another way, if you have installed ROM and want to update CWM can use this tool:
- Google play app: https://play.google.com/store/apps/details?id=com.unstableapps.cwmrtouchinstaller
- Download older version: http://d-h.st/esM or http://d-h.st/M1y
Click to expand...
Click to collapse
*Required: SuperUser (ROOT access)
1. Download recovery version from here (img type): http://clockworkmod.com/rommanager/ and save to your sdcard or any folder easy to browse.
2. Install CWMR Touch Installer
3. Open app you will see FLash from other.... Choose that option and browse to your recovery.img file.
4. When flash finish. You can use reboot to recovery option on menu and see result
nguyenduytan said:
IMG Version:
Zip Version:
Anyone can help me convert it to tar md5 version for ODIN flash. I'm very thank you!
Click to expand...
Click to collapse
instructions are here: http://forum.xda-developers.com/showpost.php?p=39037837 for making flashable tar
Thanks for reply. But i not use linux or MacOS system so i need help about that
Anybody use linux plz help me convert it.
P/S: My phone now wait for root. So i can't use anything
Thanks!
here it is.
recovery-clockwork-6.0.3.1-hercules.tar.md5 - 6.88 MB
recovery-clockwork-touch-6.0.3.1-hercules.tar.md5 - 6.88 MB
OKay. Thank you! I will be copy your post to 1st topic.
You just flash the zip through CWM recovery like normal? I don't own this phone, I'm trying to upgrade my father in law's phone. I'm just trying to figure this all out before messing with his phone. I do NOT want to use Odin because I don't trust third party flashing utilities (have had bad luck in the past, particularly with Odin).
how do you go about doing it manually? I understand that the SGS2 doesn't have fastboot so something like
Code:
dd if=/sdcard/recovery-clockwork-touch-6.0.3.1-hercules.img of=/dev/block/mmcblk0p22
???
N00b-un-2 said:
You just flash the zip through CWM recovery like normal? I don't own this phone, I'm trying to upgrade my father in law's phone. I'm just trying to figure this all out before messing with his phone. I do NOT want to use Odin because I don't trust third party flashing utilities (have had bad luck in the past, particularly with Odin).
how do you go about doing it manually? I understand that the SGS2 doesn't have fastboot so something like
Code:
dd if=/sdcard/recovery-clockwork-touch-6.0.3.1-hercules.img of=/dev/block/mmcblk0p22
???
Click to expand...
Click to collapse
Odin is from samsung
Sent from my SGH-T989 using xda premium
If your want root rom. You need odin. My topic have 4 way to update cwm recovery. And you have best choice for you.
I tried update by using older cwm to flash new cwm zip. So after next reboot cwm still old version. I try way 4 and i done.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Rushing said:
Odin is from samsung
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
I am aware. I had to download it from the official Samsung site when i flashed my father in laws phone the first time. But i am a mac/linux user. Odin is not a good solution because it complicates a process that should be really straightforward, eg
Code:
sudo fastboot flash recovery recovery.img
By third party software i mean not part of the android sdk. Odin is proprietary closed source and only works on Windows with a select few samsung phones, whereas fastboot is intended to be universally accessible.
But back to my initial question, do you just flash the. Zip in recovery like normal?
N00b-un-2 said:
I am aware. I had to download it from the official Samsung site when i flashed my father in laws phone the first time. But i am a mac/linux user. Odin is not a good solution because it complicates a process that should be really straightforward, eg
Code:
sudo fastboot flash recovery recovery.img
By third party software i mean not part of the android sdk. Odin is proprietary closed source and only works on Windows with a select few samsung phones, whereas fastboot is intended to be universally accessible.
But back to my initial question, do you just flash the. Zip in recovery like normal?
Click to expand...
Click to collapse
Really?
Download the latest .img file from here
Download the above file.
Using adb shell or terminal emulator:
su
dd if=/sdcard/openrecovery-twrp-hercules-[xxx].img of=/dev/block/mmcblk0p22
#! please note the [xxx] should be which ever # twrp .img you choose to use
Make certain that you get this command right. Typing the wrong number could result in a brick!
I just made a zip for myself lol
Sorry bout that bad rom wow just posted wrong rom is all... its not like horseshoes haha
Rushing said:
Really?
Download the latest .img file from here
Download the above file.
Using adb shell or terminal emulator:
su
dd if=/sdcard/openrecovery-twrp-hercules-[xxx].img of=/dev/block/mmcblk0p22
#! please note the [xxx] should be which ever # twrp .img you choose to use
Make certain that you get this command right. Typing the wrong number could result in a brick!
I just made a zip for myself and also TWRP2.5 is included in my newest build JELLYBEAST3.69 so dl it and you will have the best possible combo, peace.
Click to expand...
Click to collapse
he speaks the truth!!! if you want 4.1.2 official jellybeast is what your looking for more stable than stock4.1.2 imo
how to switch back to cwm from twrp?
edwarddlr said:
how to switch back to cwm from twrp?
Click to expand...
Click to collapse
Just install a flashable zip file version of CWM through TWRP and vise versa.
KRZ-2pa said:
Just install a flashable zip file version of CWM through TWRP and vise versa.
Click to expand...
Click to collapse
I did that. but it always failed.
im using twrp 2.5.0.0
edwarddlr said:
I did that. but it always failed.
im using twrp 2.5.0.0
Click to expand...
Click to collapse
It is harder to help you when you post the same question to different threads. I only gave you the link to this thread so you could download the Odin flashable CWM tar file from the OP IF you are not able to install CWM using ROM manager. Have you tried ROM manager already?
meekrawb said:
It is harder to help you when you post the same question to different threads. I only gave you the link to this thread so you could download the Odin flashable CWM tar file from the OP IF you are not able to install CWM using ROM manager. Have you tried ROM manager already?
Click to expand...
Click to collapse
can anyone PLEASE post a cwm 6.0.3.1 for hercules sgh-T989 in .tar format
not .tar.md5 or .zip JUST a .tar to be flashed thru Odin
thanx:cyclops:
sam.balia1012 said:
can anyone PLEASE post a cwm 6.0.3.1 for hercules sgh-T989 in .tar format
not .tar.md5 or .zip JUST a .tar to be flashed thru Odin
thanx:cyclops:
Click to expand...
Click to collapse
Have you tried installing the .tard.md5 posted in the OP, it should work through Odin.
Edit: I've tested the files and Odin crashes.
Has anyone had luck installing the .tar.md5 files, there's a bunch of downloads but no feedback.
KRZ-2pa said:
Have you tried installing the .tard.md5 posted in the OP, it should work through Odin.
Edit: I've tested the files and Odin crashes.
Has anyone had luck installing the .tar.md5 files, there's a bunch of downloads but no feedback.
Click to expand...
Click to collapse
.tar.md5 file posted has crashed odin every time. (tried & verified)
CWM 6.0.3.1 Touch Odin Flashable
I made and tested this one and it worked. I think the problem is that you have to rename the img file to recovery.img before making the tar file. Let me know if it works for you.
meekrawb said:
I made and tested this one and it worked. I think the problem is that you have to rename the img file to recovery.img before making the tar file. Let me know if it works for you.
Click to expand...
Click to collapse
how did u make the .tar file out of the .tar.md5 file ?
There are some old threads on rooting and new ones that are completely different.
What is the best method to r00t and what mod should i flash on it after i've rooted?
GT-I8160 v2.3.6 Gingerbread. BB: I8160XXLK6. Kernel: 2.6.35.7
Thanks
Flash a custom rom. I think kyrillos v5 is best for GB. Root is included.
But please.... There is a Q and A thread, so please use it(or ask in "how to root" thread)...
Sent from my GT-I8160 using xda premium
the simple/best rooting methode
hy,
... first extract file "I8160XXLI2_CWM_5.0.2.6_ANT.tar" from rar archive
Methode for any GB firmware:
1. instal with odin the file "I8160XXLI2_CWM_5.0.2.6_ANT.tar", in the field "PDA"
2. boot in CWM mode and update with zip file "UPDATE-SuperSU-v1.25.zip"
3. reboot ... and your mobile is rooted
Methode for any JB firmware:
1. boot in recovery mode and update with zip file "UPDATE-SuperSU-v1.25.zip"
2. reboot ... and your mobile is rooted
xXmyselfXx said:
Flash a custom rom. I think kyrillos v5 is best for GB. Root is included.
But please.... There is a Q and A thread, so please use it(or ask in "how to root" thread)...
Sent from my GT-I8160 using xda premium
Click to expand...
Click to collapse
Are you sure? I can just copy the file to my phone, boot in recovery and install.. ?
It says "Ensure that you have I8160XXLL2 installed + custom kernel (requirements). If you don't have them already installed:
-Follow this guide to flash stock firmware"
Do i not have to install the custom kernel?
please follow post #3
OGSwank said:
Are you sure? I can just copy the file to my phone, boot in recovery and install.. ?
It says "Ensure that you have I8160XXLL2 installed + custom kernel (requirements). If you don't have them already installed:
-Follow this guide to flash stock firmware"
Do i not have to install the custom kernel?
Click to expand...
Click to collapse
you answered your question for your own:
Requirements (v5)
[Optional but recommended] Stock I8160XXLL2 firmware installed [For Europe users. Download: http://d-h.st/Yyn]
Custom kernel with CWM/TWRP recovery [HD Kernel (custom kernel with TWRP, recommended) or antsm's kernel (stock kernel with CWM)]
Odin (to flash the above) [Download: http://d-h.st/nK3]
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1962100
flash this with odin and after that flash kyrillos through twrp
xXmyselfXx said:
you answered your question for your own:
http://forum.xda-developers.com/showthread.php?t=1962100
flash this with odin and after that flash kyrillos through twrp
Click to expand...
Click to collapse
Ok i'm going to try and flash kyrillos now, thanks.
I've used the already rooted rom's in this post: http://forum.xda-developers.com/showthread.php?t=1881964
I put EX Kernel on and flashed it with Kyrillos. The phone worked up until my phone crashed, as i had a lot of apps running. When i removed the battery/restarted it just got stuck in a boot loop I've accepted it and i'm going to just flash everything again. Whats the best solution around this or prevention in case it happens again?
All my apps are crashing upon startup again and i cant do anything expect click through force close over and over
I've cleared cache files, removed sd, battery etc. Nothing. I can mount the phone to my computer though.
Hi guys. I've got a problem..... I tried flashing CWM 6.0.3.4 to my Wonder, I open Odin, I choose files (Ancora.ops and CWM), Odin recognises my phone, but when I press "Start", the program gets stuck at "<1> setup connection..."
I tried changing USB cable, port, even Odin (I tried 4.43 - 4.38 and 3.98), but nothing has changed..... I am running Windows XP, and I have installed only Samsung USB Drivers, without Kies. But, as said before, Odin recognises my Wonder..... even tried on another XP computer, and have the same result...... please help me
ayesse said:
Hi guys. I've got a problem..... I tried flashing CWM 6.0.3.4 to my Wonder, I open Odin, I choose files (Ancora.ops and CWM), Odin recognises my phone, but when I press "Start", the program gets stuck at "<1> setup connection..."
I tried changing USB cable, port, even Odin (I tried 4.43 - 4.38 and 3.98), but nothing has changed..... I am running Windows XP, and I have installed only Samsung USB Drivers, without Kies. But, as said before, Odin recognises my Wonder..... even tried on another XP computer, and have the same result...... please help me
Click to expand...
Click to collapse
guide for flashing via odin. follow it carefully/ correctly Link
another way is via terminal emulator. dl link and guide
dec0der said:
guide for flashing via odin. follow it carefully/ correctly Link
another way is via terminal emulator. dl link and guide
Click to expand...
Click to collapse
I followed the Odin guide step by step, but I can't solve the problem..... BTW, my Wonder is unrooted, so I can't install CWM via terminal
ayesse said:
I followed the Odin guide step by step, but I can't solve the problem..... BTW, my Wonder is unrooted, so I can't install CWM via terminal
Click to expand...
Click to collapse
are you using stock or custom rom? can you provide a screenshot?
dec0der said:
are you using stock or custom rom? can you provide a screenshot?
Click to expand...
Click to collapse
Lol bro he's unrooted and trying to flash cwm. Don't you think it's pretty obvious he's using stock rom?
Bro, you have to root it first, only then you should flash CWM. Because you can't root using cwm. Anyway, root first then flash via terminal emulator. Should work.
Sent from my MB860 using xda app-developers app
iDelta said:
Lol bro he's unrooted and trying to flash cwm. Don't you think it's pretty obvious he's using stock rom?
Bro, you have to root it first, only then you should flash CWM. Because you can't root using cwm. Anyway, root first then flash via terminal emulator. Should work.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
OOOOOH F*CKKKKK! LAWLZ! honestly, i never thought of that, my bad
oh sorry guys, I haven't told you.... I want to install CWM because I wanna install Cyanogenmod 10 to get rid of this ****ty stock rom
ayesse said:
oh sorry guys, I haven't told you.... I want to install CWM because I wanna install Cyanogenmod 10 to get rid of this ****ty stock rom
Click to expand...
Click to collapse
Pull out the battery for a few seconds and try to flash via odin again?
ayesse said:
oh sorry guys, I haven't told you.... I want to install CWM because I wanna install Cyanogenmod 10 to get rid of this ****ty stock rom
Click to expand...
Click to collapse
*sigh!
just follow this steps:
1. root ur phone- guide HERE
2. install cwm- guide HERE
3. install desired custom rom (pristine)- guide (HERE)
Note:
*Don't forget to check md5 checksum of downloaded files b4 flashing.
*Follow instructions carefully/ correctly.
solved flashing on another Win7 laptop.... thanks for your replies
yea i tried to change recovery from a basic cwm to twrp from zip my phone isnt working and i have ubuntu it act up and how do i fix it re put cwm on my phone to work again i think its soft brick
it wont work just show the logo goes funny and does nothing please help if it nessary i use a windows but help please will thanks
Yes I looked it up I have asemi bricked my phone I was in cwm installed twrp zip and rebooted it went then loaded weird boot but loaded normal and then restarted stucked on the main logo gt n7100 and goes weird and thats it I have linux ubuntu 13.10 byt reinstall a recovery then be fine I dont want a unroot just reinstall cwm
Sent from my GT-N5110 using xda app-developers app
Can you be more specific? Using punctuation marks could make it a lot more understandable.
Also: Please post it in the questions section of the forum, the development section is for roms and mods.
@gtasmodder, try re-installing CWM from Odin again. Will fix your problem. ALSO post in Q/A forum.
Oh, and it is scared, not sacred.
You need to reflash using ODIN on a windows machine.
Go to this link - it has the instructions on how to flash CWM.
After you have got your phone back up and running you need to update it to the latest version, easiest way is to boot into your ROM, go to Play store and install ROM Manager. Now simply select to update CWM.
Search this forum for Dr.Ketan threads if you need to Root/Install Stock etc.
phlooke said:
You need to reflash using ODIN on a windows machine.
Go to this link - it has the instructions on how to flash CWM.
After you have got your phone back up and running you need to update it to the latest version, easiest way is to boot into your ROM, go to Play store and install ROM Manager. Now simply select to update CWM.
Search this forum for Dr.Ketan threads if you need to Root/Install Stock etc.
Click to expand...
Click to collapse
its stuck on the gt n7100 logo of Samsung but getting better
gtasmodder said:
its stuck on the gt n7100 logo of Samsung but getting better
Click to expand...
Click to collapse
I was in this position yesterday after a failed DN3 ROM flash.
If you follow these instructions you will be back up and running in no time:...
- Like I mentioned, flash CWM.
- Flash a stock ROM
- Root - either CF or use Dr.Ketan multitool method (search is your friend)
- Install ROM Manager, update CWM to latest
- Install <your chosen ROM> - in my case I am running CM11
Follow the above and you'll be sorted.
phlooke said:
I was in this position yesterday after a failed DN3 ROM flash.
If you follow these instructions you will be back up and running in no time:...
- Like I mentioned, flash CWM.
- Flash a stock ROM
- Root - either CF or use Dr.Ketan multitool method (search is your friend)
- Install ROM Manager, update CWM to latest
- Install <your chosen ROM> - in my case I am running CM11
Follow the above and you'll be sorted.
Click to expand...
Click to collapse
can you send a link im lost
gtasmodder said:
can you send a link im lost
Click to expand...
Click to collapse
Link to what?
Take your time, search and READ
phlooke said:
Link to what?
Take your time, search and READ
Click to expand...
Click to collapse
lots of dead ends as soon it was so post to be complete an error
gtasmodder said:
lots of dead ends as soon it was so post to be complete an error
Click to expand...
Click to collapse
I'm not sure if English is you're first language (I sincerely hope not!) so I dont really understand what you have asked there ^
My point is you need to search on this forum.
There are plenty of live threads regarding stock ROM, rooting, flashing with ODIN etc. etc.
From the front page of Android Development forum:
http://forum.xda-developers.com/showthread.php?t=1923956
...search & read.