Did anyone managed to mount USB-OTG in TWRP? - Nexus 7 (2013) Q&A

I never managed to, clicking on it does absolutely nothing.
It's quite annoying because i cannot copy stuff to my tab from recovery, i have to use ADB command line instead..
Is it just me?
Edit:
Latest TWRP ofc, 2.6.3.1

Anyone? How do you copy stuff in recovery without ADB?

For accessing files on my USB I use Stickmount and can copy files with my File Manager. I can also flash Roms that are on the USB with TWRP..
Sent from my Nexus 7 using Xparent BlueTapatalk 2

But you are talking about app , when you are booted in Android correct?
I'm talking about moving stuff to sdcard in Recovery. e.g. connecting it with my PC in recovery using USB cable wont show me any storage in "my computer", and mounting "USB-OTG" does nothing.
I have no problems copying stuff when i'm booted in Android, storage is properly detected/mounted.
But in recovery i have to use ADB to copy anything to my tab, is there solution for this?

k3lcior said:
But you are talking about app , when you are booted in Android correct?
I'm talking about moving stuff to sdcard in Recovery. e.g. connecting it with my PC in recovery using USB cable wont show me any storage in "my computer", and mounting "USB-OTG" does nothing.
I have no problems copying stuff when i'm booted in Android, storage is properly detected/mounted.
But in recovery i have to use ADB to copy anything to my tab, is there solution for this?
Click to expand...
Click to collapse
You can't mount to your computer in TWRP. USB-OTG is something different.

Yes I do it all the time. I only have the 8GB so I use USB Flash Drives, or microsd cards through an adapter all the time. I have 3 cheap USB OTG adapters I got from eBay. And one Meenova SDCard adapter. But I use micro SD's with a USB adapter with the USB OTG cables as well.
I pretty much always do this when I backup in TWRP, or am Flashing a rom.
There is two ways to do it really.
One. Go to the advanced and select Mount. On that page I just unselected everything and select USB OTG. Then you don't have to do anything else. Its just like when u select the radiobox it is marked as being mounted, you can then access any files on it using whatever means depending on the circumstances, it will be located at the root of your device, at the bottom there is a dir named 'USB-OTG' select that and your files should be in there.
The second way, go to mount, but below all the options there is a box that says 'Storage 1xxxxx mb'. Etc. Just tap that box and it let's you select either USB-OTG or the devices storage. I use this option to make a band backup so it just defaults to a TWRP/Backups/ dir on the drive. Instead of having to fiddle with all that backing up to get to a custom dir.
It should work. There is no indication that it is mounted if that's what you mean, unless there is an led on your drive of coarse.
Just head to the root dir and USB OTG should be there and you be all good.
But yeah your computer is not a hard drive so you can't just mount it like one. You could technically if you took your hard drive out and connected it with adapters, but a Flash Drive is like $5 these days for one that can hold even the biggest of files you would ever need in recovery.
Sent from my Nexus 7 using XDA Premium HD app

k3lcior said:
I never managed to, clicking on it does absolutely nothing.
It's quite annoying because i cannot copy stuff to my tab from recovery, i have to use ADB command line instead..
Is it just me?
Edit:
Latest TWRP ofc, 2.6.3.1
Click to expand...
Click to collapse
All you have to do is, Re-Format the MicroSD card in your computer (I use windows 7) using SDFormatter v4.0. Click the "Options" button and for "Format Type", Select "Quick" and for "Format Size Adjustment" Select "On". Thats it! And it will Surely be recognized in TWRP (i use v2.7). Hope that helps.

I have exactly the same problem. I have flashed a number of ROMs from a USB stick via an OTG adapter.
But now the tablet has stopped recognizing the USB OTG. As the tablet (a Nexus 7 Grouper) has no SD slot, there is no way of transferring the ROM files. So I'm stuck.

twrp otg
Hello, Im facing the same issues now, trying to back up rom to usb with otg. Twrp won't mount usb, I've tried everything to get it to mount...

bluboy88 said:
Hello, Im facing the same issues now, trying to back up rom to usb with otg. Twrp won't mount usb, I've tried everything to get it to mount...
Click to expand...
Click to collapse
I never got TWRP to see the OTG if I inserted it whilst the tablet was running. Only when I booted with OTG did it see it.
If you are using an adapter, say USB-A to USB-micro then some don't work well.

twrp otg
Thanks for the reply
I just use a small otg adapter, usb c male on one side and regular usb female on other side.
---------- Post added at 07:31 PM ---------- Previous post was at 07:18 PM ----------
m+a+r+k said:
I never got TWRP to see the OTG if I inserted it whilst the tablet was running. Only when I booted with OTG did it see it.
If you are using an adapter, say USB-A to USB-micro then some don't work well.
Click to expand...
Click to collapse
Well, i'm boooting with it pluged in and twrp still does not mount it. I have a tiny otg adapter, its just a male usb c on one side and a regular size female usb on the other...

bluboy88 said:
Thanks for the reply
I just use a small otg adapter, usb c male on one side and regular usb female on other side.
---------- Post added at 07:31 PM ---------- Previous post was at 07:18 PM ----------
Well, i'm boooting with it pluged in and twrp still does not mount it. I have a tiny otg adapter, its just a male usb c on one side and a regular size female usb on the other...
Click to expand...
Click to collapse
I'm having this same damn problem. TWRP really sucks ass on mounting USB-OTG... sometimes it works and most of the time it doesn't... I don't know what to do either when I can't load any ROMS on there!!

Related

USB on the go Problem

Bought an USB OTG cable few weeks ago and it just arrived today.
When connected to the GS3 I have (T999V), it says "security policy use of external SD card".
When I go into MYfile app and search for USB OTG, nothing appeared (a flash drive is attached with text documents and other various files)
The question, isn't the Galaxy S3 suppose to recognize this USB OTG? and there's no need to install any app to help it recognize it.
Running Team Sonic R3 Custom ROM right now.
Can anyone help me on this problem?
Because the USB OTG is one the the features that intrigued me buying the GS3!
My usb otg cable is on the way from China, so don't have hands on experience. But in ES file manager, if you navigate to /mnt/ folder you can see provision to support upto 6 usb drives as you can see in the screenshot. So try navigating to /mnt and see if you can access your usb drives from there.
Sent from my SGH-T999
Well, it is not completely unusable for me.
After I install the "USB Mass storage watcher" from the play store and mount the OTG it became usuable.
But sometimes it crashes. Also, isn't the device itself already compatible with the OTG itself? Why should I need to install the app in order from me to use the OTG? (these are the two main question here).
Also, the app isn't fully stable, it crashes sometimes and it is very hard to use. (everytime you unplug your USB device you have to mount it again)
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
p.s: I have tried to look in the ES file Manager and I did see 6 USB dirve and 1 usbOTG option. But before I use the app to mount the OTG device on my phone none of the options works. When I mount the device through the program, I can browse the files on my USB drive in the "usbOTG" option.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Mine works fine I bought a $3 otg cable from Amazon i have the t-mobile S3 stock rooted
Sent from my SGH-T999 using xda premium
william90130 said:
Bought an USB OTG cable few weeks ago and it just arrived today.
When connected to the GS3 I have (T999V), it says "security policy use of external SD card".
When I go into MYfile app and search for USB OTG, nothing appeared (a flash drive is attached with text documents and other various files)
The question, isn't the Galaxy S3 suppose to recognize this USB OTG? and there's no need to install any app to help it recognize it.
Running Team Sonic R3 Custom ROM right now.
Can anyone help me on this problem?
Because the USB OTG is one the the features that intrigued me buying the GS3!
Click to expand...
Click to collapse
maybe try this app and see if it works? https://play.google.com/store/apps/...wsMSwxLDMsImV1LmNoYWluZmlyZS5zdGlja21vdW50Il0.
i dont have this adapter but i will be getting one soon.

[Q] How to run USB OTG on HTC ONE X ???

I have a stock jellybean 4.1.1 how I Am able to run USB ON the go on my HTC One X ??? any suggestions. is it ok to install custom kernels on a stock rom to run usb OTG ??
It works on stock kernel.
Sent from my IceCold One X
just connet usb otg cable and it works (most usb otg cables from ebay works great)
if it doesnt work, check file system on your usb disk (for me works only fat32 on stock)
Mato_K said:
just connet usb otg cable and it works (most usb otg cables from ebay works great)
if it doesnt work, check file system on your usb disk (for me works only fat32 on stock)
Click to expand...
Click to collapse
I got 16 gb kingston Usb when ever I plugged that it hanged and restart my phone otherwise mouse and card readers memory cards working upto 32gb
did you try format it?
Mato_K said:
did you try format it?
Click to expand...
Click to collapse
yes i tried every format on usb and is perfectly working on pc !!
how can i use that 16gb usb on USB OTG ?? whats the reason for working
Hook it up and check in settings - storage. Scroll all the way down, there should be info about usb on the go
annus9214 said:
I have a stock jellybean 4.1.1 how I Am able to run USB ON the go on my HTC One X ??? any suggestions. is it ok to install custom kernels on a stock rom to run usb OTG ??
Click to expand...
Click to collapse
1-trying istalling Lidroid File Managar
2-connect OTG cable and mass storage
3-enjoy
elmanortega said:
1-trying istalling Lidroid File Managar
2-connect OTG cable and mass storage
3-enjoy
Click to expand...
Click to collapse
mouse and micro sd card via card reader is working except my 16gb usb and i tried with every format but still the same result phone restarts !! any reason or seggestion please ??
you said that is working...so i think that can be the 16gb sdcard that can be corrupted or damaged i think so...also try installing original software
I have a strange request, it has happened that after removing a usb drive, the phone no longer recognizes photos and music stored to sdcard?
With es file manager I see the files, but there isn't in galley or music
Anyone can help me??
Sent from my HTC One X+ using Tapatalk 4 Beta
Follow up on USB Host
I too am using an HTC One X running 4.1.1
I've got an OTG cable and have tried connecting a thumb drive and card reader. Both work. The drives are visible and accessible on the phone. That's USB storage which isn't the same as USB Host, but it shows that the port is active.
I can plug in the dongle for a wifi mouse, it too is recognised and I'm able to use the mouse to navigate around on the phone. This, as far as I understand, is actually USB Host in action.
The problem arises when I try to connect a DSLR and use a camera controller app like Helicon Remote or DSLR Dashboard. The app doesn't recognise that the camera is connected.
What's the difference between the wifi mouse and the camera?
Thoughts appreciated. Thanks.
In fact, there is a problem that any USB storage device on the phone creates the following folder structure:
/ storage / usb / Android / data / com.htc.album / .thumbnails /
Then create multiple copies, can be found in the internal memory, same-path, including folders that contain thumbnails, but empty.
So because of these being used constantly sticks, so when the capture traces of the settings, then any writes to the phone to choose from, but it can not happen, but the capture button will be disabled, but only while again not I step into the menu.
The above mentioned directories erased because the phone reboot always create them again.
If the phone was not rebooted since I've used it and the flash drive has been physically removed it, then if I connect again, it appears no file until you restart the phone.
ya i have the same problem...im using 4.2.2 custom ....and when i use my otg cable n plug my usb it works the 1st time then if i disconnect the connect it back or use another usb it wont work unless i restart my phone....not sure why its not working....but it works for samsung note 3 i tested on my friends phone...
and when i try to unmount the usb it just says unmounting in progress
sudhanmalla said:
ya i have the same problem...im using 4.2.2 custom ....and when i use my otg cable n plug my usb it works the 1st time then if i disconnect the connect it back or use another usb it wont work unless i restart my phone....not sure why its not working....but it works for samsung note 3 i tested on my friends phone...
and when i try to unmount the usb it just says unmounting in progress
Click to expand...
Click to collapse
Exactly the same.
I have the same problem. I wrote message to HTC so I'm waiting for respond
sudhanmalla said:
ya i have the same problem...im using 4.2.2 custom ....and when i use my otg cable n plug my usb it works the 1st time then if i disconnect the connect it back or use another usb it wont work unless i restart my phone....not sure why its not working....but it works for samsung note 3 i tested on my friends phone...
and when i try to unmount the usb it just says unmounting in progress
Click to expand...
Click to collapse
Got any solution for this??

Question about recovery and usb

Anyone know a custom recovery that will allow me to do nandroid backup straight to a usb drive I have tried cwm, twpr,and philz and none seem to allow this.
yes i have mounted usb in the recovery but the only option to save is to sd card any help I know i am missing something stupid.
bregga said:
Anyone know a custom recovery that will allow me to do nandroid backup straight to a usb drive I have tried cwm, twpr,and philz and none seem to allow this.
yes i have mounted usb in the recovery but the only option to save is to sd card any help I know i am missing something stupid.
Click to expand...
Click to collapse
I could be wrong but if use CWM with an OTG cable it should work fine. In CWM you need to mount your "external sd".
After the backup is done; boot up, open a file explorer, have the OTG cable plugged in and go to /sdcard/usbStorage/sda1 and you should be able to see your backup there.
Remove the MicroSD card before proceeding to do anything to avoid any issues with the OTG cable or Flash Drive.
I believe TWRP has an OTG mount mode as well.
Sent from my 710C using XDA Free mobile app
Thanks
Yes i have tried in all of them to mount the usb drive but none have the option to save to the sda1 "usb" its weird i use twrp on my htc one and it does it on there i also used cwm, twrp on my droid x2 and they did it there i also have tried multiple usb sticks from 4 gig 16 gig 32 gig 64 gig and a 128 but no luck. I mean its not that big a deal i can copy it off to my computer but would be nice to be able to do it direct

i think it's bricked

I wanted to unroot and reinstall the factory rom. However, i wiped and formated everything in recovery first. I am now stuck with a paper weight. The tab is able to get into recovery and into the bootloader but that's it. I connect it to the computer and it does not detect it. I have tried with an otg cable, but nothing. The port works as it is charging, but it refuses to connect. As there is no way to get a rom into the tab or fastboot to recover it, i think i officially bricked my first android device. Normally, my devices have an external sd card slot and i can put the files on that but not this one.
Can you not use your otg the same as if it were an external SD? That's what I do all the time in twrp.
Sent from my LG-D850 using XDA Free mobile app
bmatney said:
Can you not use your otg the same as if it were an external SD? That's what I do all the time in twrp.
Sent from my LG-D850 using XDA Free mobile app
Click to expand...
Click to collapse
the device doesn't recognize anything. I think the data port on the micro usb might have gotten fried. there is voltage getting to the device because it is charging, currently at 100%, but if i connect to the pc in either bootloader or twrp it isn't recognized. I also tried to do the otg but twrp still gives me nothing - states 0mb otg. if the board would have been cheaper i would have just bought another just in case it was that but the cost of the board is as much as a used tablet.
Make sure you're mounting the USB storage in TWRP after plugging it in: Mount > Check USB-OTG box (I've had to uncheck and check the box several times to get this working before).
Also, I'm not 100% sure on supported file systems in TWRP via usb-otg, but you may also need to make sure the USB storage you're mounting is in FAT32 format and not NTFS.

Help PLEASE....IM in despair..

Maybe Im not describing it right but no phone for over a month.. No matter what computer or version of windows 10 my phone is not recognized because I deleted all system and it comes up with error device descripor failed. I can get into fastboot and twrp recovery so thats good . but memory stick doesnt show on there no matter what format i use blah blah blah.. The unbrick tool doesnt recognize phone either probably because of the error and no usb debugging so Im willing to pay for someone to get this back up if nobody has any answer just leave whee to send and how much if no one knows of any way to get a rom on here:crying:..thanks
When you say memory stick doesn't show are you referring to OTG? If not try a USB C memory stick, or try a different one, maybe another USB C stick would work.
bandur said:
When you say memory stick doesn't show are you referring to OTG? If not try a USB C memory stick, or try a different one, maybe another USB C stick would work.
Click to expand...
Click to collapse
I have tried many usb stick memory with one of those converters...usb to c but not an actual c stick ..........good idea ..what format?
Bad1nfluence said:
I have tried many usb stick memory with one of those converters...usb to c but not an actual c stick ..........good idea ..what format?
Click to expand...
Click to collapse
My USB A/C Sandisk is formatted as exFat and detected fine in codeworkx's latest TWRP. You deleting the System partition should not affect your device's ability to detect a USB. Just load OOS/your ROM onto your USB, press "Mount" on the TWRP main menu, press "Select Storage" then "USB Storage" then "OK".
Backup your /data partition to your USB using backup option in TWRP if you had important data there that isn't stored anywhere else.
You can now just try dirty flashing OOS/ROM in the install option, but I would probably just format the bloody thing first.
Good Luck
well tried exFat format on it doesnt recognize it in recovery twrp so is there a way to access it by going into fastboot cmd if there is such a thing in android world

Categories

Resources