Related
Hi,
I'm having issues installing CWM Recovery on my Rooted GN2. It's the Canadian variant, SGH-I317M.
It does go through the process of flashing the recovery, but never gets to saying PASS in ODIN. When I try to get into the Recovery, it still has the stock Samsung Recovery. It does, however trip the flash counter.
I'm followiing the instructions here: http://forum.xda-developers.com/showthread.php?t=1988785
This is what I get after flashing in ODIN.
Maybe a bad download? Have you checked to see if it installed? I dont usually recommend this but koush's Rom Manager supports our device now, you can use the app to flash it if your already rooted:thumbup:
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
In your screen shot it shows the f-reset box checked I believe it should be unchecked.
Slff said:
In your screen shot it shows the f-reset box checked I believe it should be unchecked.
Click to expand...
Click to collapse
I tried it with the f-reset box unchecked, and I got it to say PASS, but still no CWM...
cdshepherd said:
Maybe a bad download? Have you checked to see if it installed? I dont usually recommend this but koush's Rom Manager supports our device now, you can use the app to flash it if your already rooted:thumbup:
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
I've also tried to download the file again, and still... No dice...
BlueBagodah said:
I tried it with the f-reset box unchecked, and I got it to say PASS, but still no CWM...
I've also tried to download the file again, and still... No dice...
Click to expand...
Click to collapse
Try rom manager?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
cdshepherd said:
Try rom manager?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
ROM Manager doesn't have a Recovery for the Rogers i317M...
http://forum.xda-developers.com/showthread.php?t=1988785
Sent from my SAMSUNG-SGH-I317 using xda premium
twanskys204 said:
http://forum.xda-developers.com/showthread.php?t=1988785
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
Thanks,
I've been following that thread, and it doesn't work. It will trip the flash counter, but doesn't actually install the recovery. It appears that I'm not the only one having this issue after the most recent OTA update...
Can u try and flash a kernel
Then try flashing cwm ...just a hunch
Sent from my SAMSUNG-SGH-I317 using xda premium
BlueBagodah said:
Thanks,
I've been following that thread, and it doesn't work. It will trip the flash counter, but doesn't actually install the recovery. It appears that I'm not the only one having this issue after the most recent OTA update...
Click to expand...
Click to collapse
I'm also having problems after the OTA update. Before OTA update, I was able to flash CWM without problems. Following exact same procedure as before when it was working. Only variable that changed is the OTA update.
wiser212 said:
I'm also having problems after the OTA update. Before OTA update, I was able to flash CWM without problems. Following exact same procedure as before when it was working. Only variable that changed is the OTA update.
Click to expand...
Click to collapse
I was able to install CWM by following this post: http://forum.xda-developers.com/showpost.php?p=36201055&postcount=54
But I'm starting to think that it may have been my fault the whole time...
While doing the 3 button combo to try to boot into Recovery, I was using Vol-DOWN, instead of Vol-UP. So I was going into download mode. I'm going to try flashing the CWM through ODIN again and see if I was just an idiot the whole time.
***EDIT***
It looks like I was just an idiot the whole time...
*facepalm*
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
.. so ROM manager doesnt work to insall cwm recovery after rooting on the i317m? i tried it and didnt succeed. i guess flashing is my only option but i dont want to lose anything on my phone. just install the bootloader/ recovery with no other changes. i want to start flashing some roms... jedi first.. skynote after.. any thoughts or help would be great!!
Clean rom I would suggest its awesome battery life I have a universal theme flashed over clean rom and a custom blue keyboard if I find the link to the themes ill post em on here
Sent from my sgh-1317 aka MY BLUE DEVIL using xda premium
Dewaynelives said:
Clean rom I would suggest its awesome battery life I have a universal theme flashed over clean rom and a custom blue keyboard if I find the link to the themes ill post em on here
Sent from my sgh-1317 aka MY BLUE DEVIL using xda premium
Click to expand...
Click to collapse
I thought of cleanROM but it is pretty stock. I feel if im going to flash any rom i might as well go with something modded and tweaked rather then stock, while keeping most of the note 2 and s-pen features. If i start finding them being a little buggy or draining my battery or anything, ill settle with cleanROM and just flash some custom mods.
i flashed my CWM through MobileODIN. worked like a charm. then i ran into issues with backing up to extSD, which ended up working after i formatted it but i took way longer then onto internal SD.
i know its off topic for this thread..Any suggestions or thoughts on the JEDI X9 and SKYNOTE roms will be great guys. Im all backed up and ready to flash pretty quick here.
I guess you have custom ROM. You must root and rename recovery restore files before you boot to android or stock recovery will be restored.
First I will start off by thanking everyone for taking the time out to respond to my question. With that being said, I have the gt-n5110 firmware 4.1.2. I have seen the 4.2.2 leaked rom and roms from other developers that are running the 4.2.2. Is it possible to flash these roms, even though I have 4.1.2? Or do I have to stick to the 4.1.2 roms only? Thanks again.
Sent from my GT-N5110 using Tapatalk 2
There are two ways you can upgrade your note to 4.2.2. Head over to the note 8 development forum. There are custom roms that require you to root and flash a custom recovery before you can flash the upgrade. The other is the leaked rom that can be flashed via odin. Be sure to read and follow directions. The information is all there.
Sent from my GT-N5110 using Tapatalk 2
cavsoldier19d said:
There are two ways you can upgrade your note to 4.2.2. Head over to the note 8 development forum. There are custom roms that require you to root and flash a custom recovery before you can flash the upgrade. The other is the leaked rom that can be flashed via odin. Be sure to read and follow directions. The information is all there.
Sent from my GT-N5110 using Tapatalk 2
Click to expand...
Click to collapse
So I'M currently on CiV's 4.1.2 ROM all I have to do to be on CIV's 4.2.2 ROM is flash it Via CWM Recovery?
Yes. Because there is a big difference in android versions...you will want to do a full wipe, then flash. So be sure to backup whatever u need before doing so.
Sent from my GT-N5110 using Tapatalk 2
Its always good to see others with the same questions as me.
Sent from my GT-N5110 using Tapatalk 2
cavsoldier19d said:
Yes. Because there is a big difference in android versions...you will want to do a full wipe, then flash. So be sure to backup whatever u need before doing so.
Sent from my GT-N5110 using Tapatalk 2
Click to expand...
Click to collapse
Thanx again. Not to be a bother but would I be able to flash it via Mobile 0din? (just checking my options and for future reference)
you should be able to, but why would you want to?
Its a simple wipe and flash in CWM, so just do it that way, or, if you use TWRP, then do it with that...
wase4711 said:
you should be able to, but why would you want to?
Its a simple wipe and flash in CWM, so just do it that way, or, if you use TWRP, then do it with that...
Click to expand...
Click to collapse
Ok thanks, makes sense... no need for me to complicate things
Help
Hey everybody. I´m new here. Could someone please help me? I have a note 8.0 gt-n5110 and I flashed the leaked 4.2.2 firmware, but since I had some problems (sometimes it doesn´t respond) I decided to go back to 4.1.2. I already downloaded the firmware and flashed it, but now I´m on a bootloop, It will never pass the samsung logo. What should I do? I already flashed the 4.1.2 firmware 2 times and nothing...
grivera96 said:
Hey everybody. I´m new here. Could someone please help me? I have a note 8.0 gt-n5110 and I flashed the leaked 4.2.2 firmware, but since I had some problems (sometimes it doesn´t respond) I decided to go back to 4.1.2. I already downloaded the firmware and flashed it, but now I´m on a bootloop, It will never pass the samsung logo. What should I do? I already flashed the 4.1.2 firmware 2 times and nothing...
Click to expand...
Click to collapse
Can you get into your recovery? If so do a system restore, that should wipe everything and you could start again fresh.
Sent from my GT-N5110 using Tapatalk 2
Thank you
mann75 said:
Can you get into your recovery? If so do a system restore, that should wipe everything and you could start ack fresh.
Sent from my GT-N5110 using Tapatalk 2
Click to expand...
Click to collapse
Thank you so much, it worked :good: I got back to the old reliable 4.1.2. I think I will just upgrade to 4.2 when an official update is avalaible (no more beta). I don´t know if it was just me, but with the beta of 4.2.2 I had lots of problems such as the screen (didn´t respond sometimes), the s-pen was a little uncalibrated and when I wanted to set an image as wallpaper it looked blurred.
grivera96 said:
Thank you so much, it worked :good: I got back to the old reliable 4.1.2. I think I will just upgrade to 4.2 when an official update is avalaible (no more beta). I don´t know if it was just me, but with the beta of 4.2.2 I had lots of problems such as the screen (didn´t respond sometimes), the s-pen was a little uncalibrated and when I wanted to set an image as wallpaper it looked blurred.
Click to expand...
Click to collapse
Glad it worked out for you. Its a wonderful thing when you can use the recovery application.
Sent from my GT-N5110 using Tapatalk 2
grivera96 said:
Thank you so much, it worked :good: I got back to the old reliable 4.1.2. I think I will just upgrade to 4.2 when an official update is avalaible (no more beta). I don´t know if it was just me, but with the beta of 4.2.2 I had lots of problems such as the screen (didn´t respond sometimes), the s-pen was a little uncalibrated and when I wanted to set an image as wallpaper it looked blurred.
Click to expand...
Click to collapse
thats why they call it beta
My note 8 running 4.1.2 taste like running 4.2.2
The UI is a bit differences with S4 UI
Sent from my GT-N5100 using Tapatalk 2
cavsoldier19d said:
Yes. Because there is a big difference in android versions...you will want to do a full wipe, then flash. So be sure to backup whatever u need before doing so.
Sent from my GT-N5110 using Tapatalk 2
Click to expand...
Click to collapse
I have the same question regarding a 4.1.2 --> 4.2.2 rom flash... After I do a NANDROID backup, full wipe and flash the ROM from CWM/TWRP can I recover the cache from the NANDROID backup to bring back all my screen setups or do I have to build my setup from scratch?
Many thanks!! I know its a noob question but I've searched for a while and figured I might as well just post the question.
stilldmoney said:
I have the same question regarding a 4.1.2 --> 4.2.2 rom flash... After I do a NANDROID backup, full wipe and flash the ROM from CWM/TWRP can I recover the cache from the NANDROID backup to bring back all my screen setups or do I have to build my setup from scratch?
Many thanks!! I know its a noob question but I've searched for a while and figured I might as well just post the question.
Click to expand...
Click to collapse
Never a good idea to do this. More times than not, you will run into problems thereby creating even more work for yourself. Just do it the right way and start fresh after a base update.
Sent from my GT-N5110 using Tapatalk 2
I can't flash any TW ROM after flashing cm10.2 I can only flash AOSP ROMs. any advice would help. When I flash TW ROMs it gets stuck on bootloop and yes I do full wipes of everything.
Sent from my SGH-I317 PACMAN 4.3
Jonnyaces187 said:
I can't flash any TW ROM after flashing cm10.2 I can only flash AOSP ROMs. any advice would help. When I flash TW ROMs it gets stuck on bootloop and yes I do full wipes of everything.
Sent from my SGH-I317 PACMAN 4.3
Click to expand...
Click to collapse
Did you flash the downgrade zip in the op of the cm10 thread?
Sent from my SGH-T889 using xda app-developers app
kintwofan said:
Did you flash the downgrade zip in the op of the cm10 thread?
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
No. I didn't know there was one. Thanks for the info. I'm going to check now.
kintwofan said:
Did you flash the downgrade zip in the op of the cm10 thread?
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Do you have a link for that ZIP? I'm running into a similar problem after flashing CM10.2 and can't flash a TW Rom on my S4.
Thanks!
10.2 sucks
the same thing happened to me, but i am using the stock firmware and using a tutorioal on how to unroot unbrick note 2 i hope that brings my phone to normal. and then refalsh and load jedi x 17. ALSO AT ONE POINT I DONT KNOW WHAT I DID WRONG BUT THE PLAY STORE WANTS INCLUDE IN THE 10.2 ROM THAT I INSTALL AND THE WEB PLAY STORE WOULD RECOGNIZE MY DEVICE AS NEXUS 7, BUT IT IS A NOTE 2. THAT WAS WEIRD.
@BB said:
Do you have a link for that ZIP? I'm running into a similar problem after flashing CM10.2 and can't flash a TW Rom on my S4.
Thanks!
Click to expand...
Click to collapse
First page look for restore sd-downgrade.
http://forum.xda-developers.com/showthread.php?t=2105917
downgrade.zip will NOT do ANYTHING to help your issue; all it does it change the files system back to the way it is in 4.12
something else is wrong, but you have to post more info; what rom you flashed, what recovery/version you are on, what the error message/code is when you try to flash, etc...
jon3sh said:
First page look for restore sd-downgrade.
http://forum.xda-developers.com/showthread.php?t=2105917
Click to expand...
Click to collapse
Thanks for the reply ...
wase4711 said:
downgrade.zip will NOT do ANYTHING to help your issue; all it does it change the files system back to the way it is in 4.12
something else is wrong, but you have to post more info; what rom you flashed, what recovery/version you are on, what the error message/code is when you try to flash, etc...
Click to expand...
Click to collapse
Thanks even more for letting me know that this won't do the trick. I should start by reiterating that I have a S4 on Sprint and not a Note 2 on AT&T, so I before I get flamed for being in the wrong forum, just wanted to check if I should go further on what I'm running and the "error" I'm experiencing to see if you can help. I'd really appreciate it if you could but don't want to break any rules ...
its not so much about breaking the rules, as it is about giving you advice that could harm your device, since its not the same as this threads'
I would take it to the s4 threads, just to be sure
good luck
So still no luck with this for me. Someone please help. I can only flash non touchwiz ROMs. I am running pacman nightly 4.3 9-7-13 version. I just flashed devil kernel to see if it would fix the issue. No luck but definetly a nice kernel. I try to flash jedix17 16 and even a nandroid I had from 16 no luck. Tried several other tw ROMs but it just gets stuck on bootloop. Hellllllllllp I like pacman but I was flashing roms everyday and I'm going nuts. I brick my gs3 backup phone so I have to be very careful now with only one phone. Advice?????
Sent from my sgh-i317 using pacman nightly
Okay. ....do you show correct IMEI Number ?
And do you have data ?
If yes. ..then let's try this. ..(deep breath)..(make a backup)...then the following:
First. ...boot to recovery and wipe data, caches, and internal storage. ..
Basically everything without touching your external card. ..and just to be sure. .take it out and set it aside. .(make sure to unmount it in settings first !!!)
Next. .turn off the device and boot into download mode. ..(ready for Odin)
Then using only your PC...download Mr. Robinsons rooted UCAMA4 build from his thread. .. (in the development section)..
Next. ..push the image you just downloaded to the device via Odin. ..(use the PDA box...and don't change any Odin settings)...
Next. ..wait for the image to automatically boot the device once completed. ....(unplug the device)..
If the device fails to boot. ..pull the battery. ..wait 30 seconds. ..then replace it and boot into the newly flashed 3e recovery and wipe cache and data 2 times each. ..then reboot.....
If the device boots normally then move to the next step. ..and if not. ..repeat the flash process again using Odin and the rom you downloaded. ..
If after two unsuccessful flashes, and wipes using 3e recovery, and battery pulls. ..you still don't get a successful boot. ..you may have partition damage. ..in which case a repair may be needed. ..but for the sake of your phone we'll wait until the above has failed. ..
Next. ...If boot occurs using the above method. ..enter your wifi password and log into the play store and download triangle away if you want your counter reset. .
If not. ..skip the play store after entering the wifi password and move into your settings/about phone/software update. ..
Push the update button and wait for ATT to offer you the update to UCAMC3..then take it. ..
If desired you can then clear the flash counter and unroot...
Let's get that far before worrying about anything else. ..
Please record any errors or messages you get. ..especially while using Odin. ..as this tells us the device partition state. ..especially when PIT files are involved. .
Sorry for the long post. ..but it was necessary. ..I hope. .
Please post back. ...g
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
Hi XDA! I have a Samsung Galaxy Note 3 N900T T-Mobile. I've had custom roms such as CM11 Nightly in the past. Well after trying to do a fresh install a while back of another custom rom, my phone at first had no OS because I wiped it like a doofus. So I flashed it back to stock, 4.3 at the time. And then starting a couple weeks ago I flashed CWM using CWM Manager app. That's when the same issue that's recurring over and over, began. My phone works great as long as I never reboot into recovery. If I reboot into recovery it gets stuck in a bootloop. However I noticed tonight after trying to reboot into recovery using goo manager, I noticed the last line when it first boots, then bootloops, says Set warranty bit-recovery. If I remember correctly shouldn't it say kernel?? I know this is my fault because I'm not as knowledgable as all of you (I'm still learning on my own). SO my question is this. I want to fix this once and for all because I can't ever flash a custom rom like Darthstalker (that's the one I'd like to flash)...after several failed attempts of flashing CM for example, to no avail. What can I do to fix this once and for all and be able to flash a kernel, and Darthstalker? I can get into download mode, needless to say. ANd all the other times it's bootlooped I flashed KitKat 4.4.2 and everything works fine until i try to reboot into recovery. I am at my witts end because this i I really want a custom rom instead of flashing only the md5. Would anyone please be willing to give me a tutorial of some kind? I know it's a lot to ask but I can't find another reliable source that can explain how to do all of this. You're the only site I trust and if anyone is willing to give mea tutorial via email , PM, etc. I'd be eternally grateful beyond belief. Thank you in advance for any advice or info
I posted a few days ago about my bootlooping in the recovery. I finally fixed it by these 3 steps.
1) Odin flashed Stock 4.4.2 complete as this sets the correct boot loader.
2) I downloaded Twrp 2.7.0 the one that list KitKat (Must say this) 4.4 version.
http://goo.im/devs/OpenRecovery/hltetmo/openrecovery-twrp-2.7.0.0-hltetmo-4.4.img.tar
3) Right from Odin when flashing this you set it not to reboot, Once finished you then unplug the usb cable and pull the battery. Let is sit for about 10 sec. Then with the upVlm,Home and Power it will boot to the recovery. It first will post what you said but wait about 10 sec more twrp will come up.
4) Now you should be able to flash any rom you want. I am using axmans N3 for now works great. I will be trying CM 11 later.
5) make a backup once in Twrp
Hope this helps.
helterkelter said:
Hi XDA! I have a Samsung Galaxy Note 3 N900T T-Mobile. I've had custom roms such as CM11 Nightly in the past. Well after trying to do a fresh install a while back of another custom rom, my phone at first had no OS because I wiped it like a doofus. So I flashed it back to stock, 4.3 at the time. And then starting a couple weeks ago I flashed CWM using CWM Manager app. That's when the same issue that's recurring over and over, began. My phone works great as long as I never reboot into recovery. If I reboot into recovery it gets stuck in a bootloop. However I noticed tonight after trying to reboot into recovery using goo manager, I noticed the last line when it first boots, then bootloops, says Set warranty bit-recovery. If I remember correctly shouldn't it say kernel?? I know this is my fault because I'm not as knowledgable as all of you (I'm still learning on my own). SO my question is this. I want to fix this once and for all because I can't ever flash a custom rom like Darthstalker (that's the one I'd like to flash)...after several failed attempts of flashing CM for example, to no avail. What can I do to fix this once and for all and be able to flash a kernel, and Darthstalker? I can get into download mode, needless to say. ANd all the other times it's bootlooped I flashed KitKat 4.4.2 and everything works fine until i try to reboot into recovery. I am at my witts end because this i I really want a custom rom instead of flashing only the md5. Would anyone please be willing to give me a tutorial of some kind? I know it's a lot to ask but I can't find another reliable source that can explain how to do all of this. You're the only site I trust and if anyone is willing to give mea tutorial via email , PM, etc. I'd be eternally grateful beyond belief. Thank you in advance for any advice or info
Click to expand...
Click to collapse
I'm honestly confused on what you are asking. What bootloader are you on . Jellybean or Kit Kat. That is the big part of the question. If you are on Kit Kat you can no longer run Darthstalker as it's a 4.3 rom. Just curious because you say that you flashed 4.4.2 rom and everything works. Also, the bootloop would either be your kernel or your recovery. I would suggest Philz or Twrp 2.7 as they are both updated and will work on either bootloader.
Once you have flashed a bootloader and custom recovery NEVER USE ODIN AGAIN UNLESS YOU HAVE BRICKED YOUR PHONE.
dragonstalker said:
I'm honestly confused on what you are asking. What bootloader are you on . Jellybean or Kit Kat. That is the big part of the question. If you are on Kit Kat you can no longer run Darthstalker as it's a 4.3 rom. Just curious because you say that you flashed 4.4.2 rom and everything works. Also, the bootloop would either be your kernel or your recovery. I would suggest Philz or Twrp 2.7 as they are both updated and will work on either bootloader.
Once you have flashed a bootloader and custom recovery NEVER USE ODIN AGAIN UNLESS YOU HAVE BRICKED YOUR PHONE.
Click to expand...
Click to collapse
I'm on 4.4.2.I figured it is my kernel. After sending this message last night I had my phone in download mode but didn't do anything to it. I decided to turn it off and then on again and it booted. So if this is a kernel issue where would I find one and how would I do this? Oh and when the bootloop occurred last night I was trying to boot into recovery via too manager. If I put Twrp on my phone when I have CWM will they interfere? I apologize for the likely stupid questions but I'm just wanting to get it done properly. One last thing is PacMan ROM compatible?
helterkelter said:
I'm on 4.4.2.I figured it is my kernel. After sending this message last night I had my phone in download mode but didn't do anything to it. I decided to turn it off and then on again and it booted. So if this is a kernel issue where would I find one and how would I do this? Oh and when the bootloop occurred last night I was trying to boot into recovery via too manager. If I put Twrp on my phone when I have CWM will they interfere? I apologize for the likely stupid questions but I'm just wanting to get it done properly. One last thing is PacMan ROM compatible?
Click to expand...
Click to collapse
The kernels you can use are listed in the general thread. A user posted a very good listing of what's what. TWRP 2.7 or Philz Touch are the 2 recoveries i would recommend using. Whichever one you decide will overwrite the other. you can never have 2 recoveries.
OK I'm sorry but I'm a little confused. One solution mentioned was to flash 4.4.2 stock using Odin. But you said not to use it unless I've bricked my phone. So now I'm lost. Lol. Do I flash the stock with the above mentioned method? Or do I flash a kernel and then a ROM? I apologize for my inexperienced questions. I'm including my device info below in hopes you can tell me the very first step I should take. Thank you for all your help!!!
Baseband N900TUVUCNB4
KERNEL- 3.4.0-660648 [email protected]#1
BUILD #- KOT49H.N900TUVUCNB4
SE FOR ANDROID STATUS- ENFORCING SEPF_SM-N900T_4.4.2-0005
SECURITY SOFTWARE VERSION- MOF v1. Release 2
Sent from my SM-N900T using xda app-developers app
helterkelter said:
OK I'm sorry but I'm a little confused. One solution mentioned was to flash 4.4.2 stock using Odin. But you said not to use it unless I've bricked my phone. So now I'm lost. Lol. Do I flash the stock with the above mentioned method? Or do I flash a kernel and then a ROM? I apologize for my inexperienced questions. I'm including my device info below in hopes you can tell me the very first step I should take. Thank you for all your help!!!
Baseband N900TUVUCNB4
KERNEL- 3.4.0-660648 [email protected]#1
BUILD #- KOT49H.N900TUVUCNB4
SE FOR ANDROID STATUS- ENFORCING SEPF_SM-N900T_4.4.2-0005
SECURITY SOFTWARE VERSION- MOF v1. Release 2
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
You are already on the 4.4 bootloader so you can no longer use the Darthstalker rom, you can only use Kit Kat 4.4.2 and above roms from here on out. Next question would be have your rooted your phone since the update and have a custom recovery. If you have not rooted, then you will need to use Odin to run the CF_Autoroot, but that will trip your Knox to 0x1. Thus voiding your warranty.
Yes I rooted. But every time I try flashing CWM or Twrp it bootloops. And to get out of bootloop I have to boot in download and then cancel download and it reboots normal again. Is this a kernel or boot loader issue?
Sent from my SM-N900T using xda app-developers app
helterkelter said:
Yes I rooted. But every time I try flashing CWM or Twrp it bootloops. And to get out of bootloop I have to boot in download and then cancel download and it reboots normal again. Is this a kernel or boot loader issue?
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
Which cwm and twrp are you trying to flash. The only 2 that will work on Kit Kat are PHilz touch latest one, and TWRP 2.7
Twrp 5.7.3
Sent from my SM-N900T using xda app-developers app
So do I flash stock as mentioned from another member or do I flash a kernel? I'm not sure what to do next
Sent from my SM-N900T using xda app-developers app
helterkelter said:
So do I flash stock as mentioned from another member or do I flash a kernel? I'm not sure what to do next
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
oh sorry for the late response. Just got back from boy scouts. Anyway. No you don't need to flash back to stock, Your just flashing the wrong version of TWRP. You can go to the android originial development thread and download the TWRP 2.7 and flash via recovery and you will be all good to go. Also, download the latest Wootever kernel just to make sure you have both angles covered. Both downloads are found in the same section.
Ok thanks so much. Im a little scared to flash in TWRP as it always puts me in bootloops. I did download philz and I was considering flashing that via Odin as I can't boot into recovery. Would that be the next best thing to do? Oh and dont apologize!! I can't thank you enough!
Sent from my SM-N900T using xda app-developers app
helterkelter said:
Ok thanks so much. Im a little scared to flash in TWRP as it always puts me in bootloops. I did download philz and I was considering flashing that via Odin as I can't boot into recovery. Would that be the next best thing to do? Oh and dont apologize!! I can't thank you enough!
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
Yes, odin the custom recovery and you should have no more issues. As for the bootloops with TWRP, you only had issues with that, because the version you were trying to use was outdated and does not work on Kit Kat
Hmm found an interesting possible solution and would greatly appreciate your guidance. I found a ROM that supports KK and I think in this thread that it may indicate why I bootloop when trying to bootbin recovery. http://www.infamousdevelopment.com/...-recover-from-a-bad-flash-updated-for-kitkat/
I'm seriously considering following this whole tutorial of his to the letter. Would it be wise to do?
Sent from my SM-N900T using xda app-developers app
helterkelter said:
Hmm found an interesting possible solution and would greatly appreciate your guidance. I found a ROM that supports KK and I think in this thread that it may indicate why I bootloop when trying to bootbin recovery. http://www.infamousdevelopment.com/...-recover-from-a-bad-flash-updated-for-kitkat/
I'm seriously considering following this whole tutorial of his to the letter. Would it be wise to do?
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
You have already upgraded to Kit Kat, that part is done. and you ran CF_Autoroot correct in Odin correct? If you have done both steps all that is left is to Odin the Philz Touch Recovery that you downloaded.
Ok and yes I did both the first two steps you asked above. After I do flash philz can I flash a ROM it CM or PacMan as long ad they're 4.4.2?
Sent from my SM-N900T using xda app-developers app
helterkelter said:
Ok and yes I did both the first two steps you asked above. After I do flash philz can I flash a ROM it CM or PacMan as long ad they're 4.4.2?
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
As long as they are AOSP Roms that support both bootloaders yes, and as i've been told most if not all the AOSP Roms do support the Kit Kat bootloader that you are already on.
Ok thank you again. I will likely flash philz tonight (if hubby allows me to cuz I usually stay up all night til I got my phone the way I want it, ie no boot loops lol) I will report back to let you know if it works. This phone has been through hell and back with me but I've learned a lot!! Especially from contributors such as yourself. :thumbup:
Sent from my SM-N900T using xda app-developers app
Cool. I'm glad I read this thread. I too had same problems.
Sent from my NOTE 3 using Tapatalk
Hi as always I come for the expert advice to you guys. I have recently UPDATED my Galaxy S4 for Tmobile to CyanogenMod. Frankly I love the speed but it is still in beta version and has a few things I did not like. Few glitches. Anyway:
I want to go back to my stock firmware which was Kit Kat 4.2.2.before I installed Cyanogenmod.
I already downloaded Odin V3 09 and am ready to do this but I still do not have the stock firmware file. I looked for it but I really don't want to screw it up.
Can someone be so kind and insert the link to the download ? And if of course possible STEP BY STEP instructions on HOW TO GO BACK ?
I understand my phone now is rooted and will stay rooted after reinstalling Kit Kat. So I still should be able to get rid of all the bloatware correct ?
Any help greatly appreciated and huge THANKS IN ADVANCE !!!
Download firmware here http://www.cheatersedge.org/android/m919/M919UVUFNB4_M919TMBFNB4_TMB_FENNY_FIXED.zip, there is a thread already on instructions on how to flash.. and just because you rooted doesn't mean your device will stay rooted forever. Once you flash the firmware you will be unrooted but you can root again.. Alternatively you can just flash a debloated stock rom in recovery
Sent from my SGH-M919 using Tapatalk
emeres said:
Hi as always I come for the expert advice to you guys. I have recently UPDATED my Galaxy S4 for Tmobile to CyanogenMod. Frankly I love the speed but it is still in beta version and has a few things I did not like. Few glitches. Anyway:
I want to go back to my stock firmware which was Kit Kat 4.2.2.before I installed Cyanogenmod.
I already downloaded Odin V3 09 and am ready to do this but I still do not have the stock firmware file. I looked for it but I really don't want to screw it up.
Can someone be so kind and insert the link to the download ? And if of course possible STEP BY STEP instructions on HOW TO GO BACK ?
I understand my phone now is rooted and will stay rooted after reinstalling Kit Kat. So I still should be able to get rid of all the bloatware correct ?
Any help greatly appreciated and huge THANKS IN ADVANCE !!!
Click to expand...
Click to collapse
Finding the stock firmware won't be easy unless you try downloading from sammoble, but you could try Fenny's stock rooted 4.4.2 rom in development.
It's very smooth without the bloatware and it has unlimited tethering.
It works best with Philz recovery.
Just follow the directions and your good to go.
Don't forget to do a factory reset.
Pp.
Sent from my Touchwiz device that never forgets apps.
PIN lock screen does NOT work on Fenny's rom when you first boot/restart/power up the phone. So, if you are turning your phone on the lock screen will just be skipped over.
Pin lock issue could be NG if you need that type of security.
Pp.
Sent from my Touchwiz device that never forgets apps.
serio22 said:
Download firmware here http://www.cheatersedge.org/android/m919/M919UVUFNB4_M919TMBFNB4_TMB_FENNY_FIXED.zip, there is a thread already on instructions on how to flash.. and just because you rooted doesn't mean your device will stay rooted forever. Once you flash the firmware you will be unrooted but you can root again.. Alternatively you can just flash a debloated stock rom in recovery
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Thank you so much Serio22, I just want to make sure it is the correct one for my Tmobile GS4.
And also would you be so kind and attach the STEP BY STEP instructions for Odin ? I am really afraid of bricking my phone. I need guidance.
People say once you do it few times it becomes easy as pie. But like I wrote above I don't want to mess up my phone.
emeres said:
Thank you so much Serio22, I just want to make sure it is the correct one for my Tmobile GS4.
And also would you be so kind and attach the STEP BY STEP instructions for Odin ? I am really afraid of bricking my phone. I need guidance.
People say once you do it few times it becomes easy as pie. But like I wrote above I don't want to mess up my phone.
Click to expand...
Click to collapse
There's instructions here, is for MDL but it's the exact same way for NB4 http://forum.xda-developers.com/showthread.php?t=2258628
Sent from my SGH-M919 using Tapatalk
serio22 said:
There's instructions here, is for MDL but it's the exact same way for NB4 http://forum.xda-developers.com/showthread.php?t=2258628
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
One last question and I won't bother again:
When it comes to those files " OFFICIAL TAR AND ORIGINAL TAR " do I just choose any one of them ?? I wanted to know the difference between them both. Instructions don't really specify which to choose. Or is it both ?
And also there is a suggestion to " Wipe the data in recovery " after the whole thing how do I do that ? Should I do that ?
Thank you again for your help.
emeres said:
One last question and I won't bother again:
When it comes to those files " OFFICIAL TAR AND ORIGINAL TAR " do I just choose any one of them ?? I wanted to know the difference between them both. Instructions don't really specify which to choose. Or is it both ?
And also there is a suggestion to " Wipe the data in recovery " after the whole thing how do I do that ? Should I do that ?
Thank you again for your help.
Click to expand...
Click to collapse
You don't have to worry about that, just use the tar file I posted earlier
Edit: and for the wipe data, you reboot to recovery after you flashed the firmware and do a factory reset.. Yes you should, but not necessary if you don't have any issues..
Sent from my SGH-M919 using Tapatalk
Thank you so much again, you were more than helpful :laugh:
serio22 said:
You don't have to worry about that, just use the tar file I posted earlier
Edit: and for the wipe data, you reboot to recovery after you flashed the firmware and do a factory reset.. Yes you should, but not necessary if you don't have any issues..
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Sorry one more thing:
In the instructions Auto Reboot is checked. I have watched a few videos with the F. Reset Time also checked, should I check both in Odin ?
emeres said:
Sorry one more thing:
In the instructions Auto Reboot is checked. I have watched a few videos with the F. Reset Time also checked, should I check both in Odin ?
Click to expand...
Click to collapse
I don't think any of them are necessary, but you can check both of them if you want.. I always have F.Reset checked and reboot disabled because I like to reboot on my own but that's just me
Sent from my SGH-M919 using Tapatalk
serio22 said:
You don't have to worry about that, just use the tar file I posted earlier
Edit: and for the wipe data, you reboot to recovery after you flashed the firmware and do a factory reset.. Yes you should, but not necessary if you don't have any issues..
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
So I am back to stock it took me back to KitKat and now I am unrooted. I did not do the factory reset with Cyanogen so when I flashed the stock ROM I still had the cyanogen wallpaper. Some apps did not work so I did the factory reset and everything is flawless now.
Thank you for your help and the file you have provided. By the way was that the Jellybean of KitKat stock firmware ?
emeres said:
So I am back to stock it took me back to KitKat and now I am unrooted. I did not do the factory reset with Cyanogen so when I flashed the stock ROM I still had the cyanogen wallpaper. Some apps did not work so I did the factory reset and everything is flawless now.
Thank you for your help and the file you have provided. By the way was that the Jellybean of KitKat stock firmware ?
Click to expand...
Click to collapse
KitKat
Sent from my SGH-M919 using Tapatalk