Can someone tell me what is going on with my phone... I have the latest MJC modem and I cannot install CM11 ROM?
Do you have custom Recovery installed ? If so is that latest version ?
yes the RECOVERY is the latest version, also I experience some bad CALLS meaning that when somebody calls me they cannot understand what I'm talking can someone tell me how I can flash the latest bootloader and modem without damaging my phone in any way?
Please post the exact Recovery version and error message you get when flashing CM 11.
Related
Hi everyone I flashed my GFs phone to I747UCDMG2 bootloader. Updated the TWRP to the latest via goomanager.
I get the following error when I try to install the zip. See the picture below, can someone help me? I am on Hypervision ROM RLS15
I suggest installing the latest Philz Touch Recovery via Odin.
audit13 said:
I suggest installing the latest Philz Touch Recovery via Odin.
Click to expand...
Click to collapse
this didn't help got the same error
Is it possible the device ID on the phone doesn't match the ROM? Have a look at the updater script in the ROM to make sure it matches the phone.
Hi, I'm having issues flashing roms which aren't based off of 4.1.2 firmware. I am rooted on 4.1.2 JB and have flashed a few of the 4.1.2 roms on my tmobile s3 t999, when I attempt anything else it fails with "error 7" for example cm10 and 11 or 4.3/4.4. Please Help? Thanks.
1. Make sure you're on latest version of recovery.
2. You may need to ODIN to a newer version/bootloader.
ShernDog said:
1. Make sure you're on latest version of recovery.
2. You may need to ODIN to a newer version/bootloader.
Click to expand...
Click to collapse
I tried flashing over the bootloader update found here. http://forum.xda-developers.com/showthread.php?t=2282603
and am receiving a "status 7" error once again. I restored a backup which contained no mods, downloaded rootkeeper and booted into cwm tried flashing the updated zip, it returned a status 7 error. I'm not sure how to proceed. I am currently using 4.1.2 axis with trinity kernel. I cant seem to flash anything whatsoever aside from roms based off 4.1.2. Can someone help me step-by-step?
thanks
Update recovery
thanks guys. Success!!!
Hello,
Trying to install the custom ROM cyanogen mod 11.
http://forum.xda-developers.com/showthread.php?t=2682905
First time I ever attempt to flash a custom rom.
In the guide it asks to DL Bootloader & Modem. My baseband is:
I747MVLUFOB3
I can't find any baseband corresponding to this one.
Here I found a firmware that correspond to my base band.
http://www.sammobile.com/firmwares/database/SGH-I747M/
Not sure if it is useful...
Any way to install the custom room??
Cheers
Just a nickname said:
Hello,
Trying to install the custom ROM cyanogen mod 11.
http://forum.xda-developers.com/showthread.php?t=2682905
First time I ever attempt to flash a custom rom.
In the guide it asks to DL Bootloader & Modem. My baseband is:
I747MVLUFOB3
I can't find any baseband corresponding to this one.
Here I found a firmware that correspond to my base band.
http://www.sammobile.com/firmwares/database/SGH-I747M/
Not sure if it is useful...
Any way to install the custom room??
Cheers
Click to expand...
Click to collapse
Which variant of the galaxy s3 do you have? You should be able to flash any ROM compatible with your phone using TWRP or Phil touch recovery.
I have the i747m (rogers canada). I have TWRP 2.8.7.0 & rooted with Kingo root. Somehow it was the only way to root it. Tried Towel root & odin but both were doing nothing.
TWRP was installed a long time ago. I recently made an update on kies (what a mistake sign...). I was on 4.4.2 before and after the firmware update on kies.
I got a spare S3 motherboard (with cpu etc.) I might try on that one first but I need to disassemble & assemble everything... not very tempting.
I usually just use odin and http://www.sammobile.com/firmwares/ to start fresh and root again when I want to upgrade bootloader and modems.
As you saw at sammobile, OB3 is the latest official release for the i747. You do not need to do anything to your baseband (modem) to run CM11. You may want to verify that your bootloader (firmware) matches the modem. This can be done from within TWRP. Go to the advanced menu and in the terminal enter
Code:
getprop ro.bootloader
You should get a return ending in OB3.
I suspect the CM 11 updater-script has not been updated to account for the just released OB3 firmware. If that is the case, you could always edit the script in the roms zip file.
@dawgdoc
When I entered the command, it returned me:
I747MVLUFOB3
Secondly, I have not tried to install CM11 (or the newer version CM12?). I do not know if it works. I just want to make sure I can flash and not brick my phone.
My phone is not the d2att (i747), it is d2can (i747m). I believe these two are very similar but enough different to cause problem.
So, can I install CM11 or 12?
You are talking about changing a zip file... The newb I am know how to do that, but what exactly - that he doesn't know. So I would rather not mess with that. I guess TWRP checks if the firmware of the bootloader / modem matches to those from a compatible list and simply updating that list would allow me to install the build?
I was thinking about this ROM:
http://forum.xda-developers.com/galaxy-s3-att/development/unofficial-cyanogenmod-12-t2968854
Don't know the exact difference with the CM12 but it says d2can.
However, the BaNkS GAPPS - GAPPS link does not work... I don't know what that is.
Just a nickname said:
@dawgdoc
When I entered the command, it returned me:
I747MVLUFOB3
Secondly, I have not tried to install CM11 (or the newer version CM12?). I do not know if it works. I just want to make sure I can flash and not brick my phone.
My phone is not the d2att (i747), it is d2can (i747m). I believe these two are very similar but enough different to cause problem.
So, can I install CM11 or 12?
You are talking about changing a zip file... The newb I am know how to do that, but what exactly - that he doesn't know. So I would rather not mess with that. I guess TWRP checks if the firmware of the bootloader / modem matches to those from a compatible list and simply updating that list would allow me to install the build?
I was thinking about this ROM:
http://forum.xda-developers.com/galaxy-s3-att/development/unofficial-cyanogenmod-12-t2968854
Don't know the exact difference with the CM12 but it says d2can.
However, the BaNkS GAPPS - GAPPS link does not work... I don't know what that is.
Click to expand...
Click to collapse
The unofficial CM12 -5.1.1 by @matrixzone is good for the i747M, aka d2can. If you have any doubts, ask on that thread if it is updated to run on OB3? Matrixzone is active on the forums and should respond to your question. Also I just checked the updater-script for the latest CM11 official nightly and it is set up to run on the i747M.
So, either should run with no problems for you.
What is the bootloader and modem version needed and how do I get them without getting a locked bootloader? I'm on i747M with 4.1.1 Stock rom with DLK4 modem and bootloader. There are newer bootloaders and modems that can be flashed through recovery but some people have been getting bricks when messing with bootloader.
THey say to use Official firmwares to have it update the bootloaders but which one is the proper firmware version to get the proper bootloader and modem version to allow DATA 4g LTE after flashing CM12.1 Lollipop rom?
Chupacabra117 said:
What is the bootloader and modem version needed and how do I get them without getting a locked bootloader? I'm on i747M with 4.1.1 Stock rom with DLK4 modem and bootloader. There are newer bootloaders and modems that can be flashed through recovery but some people have been getting bricks when messing with bootloader.
THey say to use Official firmwares to have it update the bootloaders but which one is the proper firmware version to get the proper bootloader and modem version to allow DATA 4g LTE after flashing CM12.1 Lollipop rom?
Click to expand...
Click to collapse
I see audit13 is helping you in the other thread, therefore I will not confuse things and also reply here.
dawgdoc said:
I see audit13 is helping you in the other thread, therefore I will not confuse things and also reply here.
Click to expand...
Click to collapse
But the newest firmware is bad because it has evil bootloader.
Chupacabra117 said:
But the newest firmware is bad because it has evil bootloader.
Click to expand...
Click to collapse
Check my long post over there.
good afternoon, I have a Galaxy S3 SGH-I747 Model using ClockworkMod install the [ROM] [4.4.4] SlimKat d2att (at & t) Stable 9.0 and [Gapps] [4.4.x] Official Slim GApps TRDS (Slimkat) and now not recognize me the sim card. i bought this phone in amazon for use it here in Madrid. i dont know if is a Modem issue. I appreciate all the help you can give me. Thank you. (sorry for my english)
Does your sim card have a pin code that you enter each time you boot the phone? If yes, does the phone ask for the pin before unlocking the sim? What bootloader and modem are currently on the phone? Did the phone work before installing a custom ROM?
@audit13 , mine said "no service available" after moving from KK to lolli and i flashed a "write to extsdcard fix zip" and it fixed the issue , i.e. can now make and recieve calls. dont know if is same issue (or why exactly that fixed mine) but i have a KK "write to extsdcard fix.zip" if you think it would help.
"err on the side of kindness"
audit13 said:
Does your sim card have a pin code that you enter each time you boot the phone? If yes, does the phone ask for the pin before unlocking the sim? What bootloader and modem are currently on the phone? Did the phone work before installing a custom ROM?
Click to expand...
Click to collapse
Thank you, audit13, my Sim card have a pin code, but doesn't ask for the pin, and yes, the phone work well before installing the custom rom. Where can I look the bootloader and modem?.
you can download the "samsung info app" from here http://forum.xda-developers.com/showthread.php?t=2609045
and it will tell you bootloader and modem.
(p.s. as always audit13 , not trying to butt-in ; just trying to help out/save you a step )
"err on the side of kindness"
Hey I have sgh-i747m canadian on stock jb . I flashed to CM 12.1 and my phone doesn't recognize sim. That means I can make calls and receive but no mobile data. Please help me
Sent from my SAMSUNG-SGH-I747 using XDA-Developers mobile app
For the i747, sounds to me like the bootloader and modem are too old for the rom.
For theni747m, is the phone running the latest bootloader and modem?
@mrrocketdog, I've never heard about that zip until your helpful post. I must keep that in mind for the future even though I haven't had an s3 for quite a while.
audit13 said:
Does your sim card have a pin code that you enter each time you boot the phone? If yes, does the phone ask for the pin before unlocking the sim? What bootloader and modem are currently on the phone? Did the phone work before installing a custom ROM?
Click to expand...
Click to collapse
Ok, use the app that mrrocketdog ,so nicely share to us, and the bootloader is I747UCDLK3 and the módem is MSM8960. Something call my atention, the kernel is 3.4.104-cyanogenmod-g38a4g52 [email protected] #1 32-bit. I hope this information can help. Thank you
mrrocketdog said:
@audit13 , mine said "no service available" after moving from KK to lolli and i flashed a "write to extsdcard fix zip" and it fixed the issue , i.e. can now make and recieve calls. dont know if is same issue (or why exactly that fixed mine) but i have a KK "write to extsdcard fix.zip" if you think it would help.
HI, where can I find that zip to see if fix my problem. Thanks in advance.
Click to expand...
Click to collapse
The problem is the bootloader and modem. They need to be updated to work with the latest ROMs.
If the phone is sim unlocked, I recommend flashing back a stock rom using Odin and the firmware from sammobile, set up the phone, run ota updates until the phone is running the latest bootloader and modem. This is tedious and takes the most time but it is the safest method in my opinion.
If you don't want to go this route, just flash the latest modem and bootloader using twrp, flash the custom rom, flash gapps.
@Budare , here is the thread to upgrade bootloaders and modem if you decide on this route rather than flashing back to stock and running ota updates as @audit13 suggested , which IS the safest route. (always always always a certain % of risk ; no matter how small , to flash anything. not trying to scare you , just being honest)
http://forum.xda-developers.com/showthread.php?t=2808654
p.s. you might want to think about changing to twrp recovery as cwm has not been updated in quite a long time.
p.s.s. here's the latest twrp DL page for sghi747 att
https://dl.twrp.me/d2att/
"err on the side of kindness"
audit13 said:
The problem is the bootloader and modem. They need to be updated to work with the latest ROMs.
If the phone is sim unlocked, I recommend flashing back a stock rom using Odin and the firmware from sammobile, set up the phone, run ota updates until the phone is running the latest bootloader and modem. This is tedious and takes the most time but it is the safest method in my opinion.
If you don't want to go this route, just flash the latest modem and bootloader using twrp, flash the custom rom, flash gapps.
Click to expand...
Click to collapse
thank you audit13, but how i run ota updates??
To run ota updates, you need to use Odin to flash the stock att 4.1.1 rom using Odin. After setting up the phone, check for software update under the phone settings.
audit13 said:
To run ota updates, you need to use Odin to flash the stock att 4.1.1 rom using Odin. After setting up the phone, check for software update under the phone settings.
Click to expand...
Click to collapse
i dont know if is because im in Madrid, but the phone doesnt get updates, thats why i want to use another rom. what can i do?
Not sure but I have received OTA updates even when the phone is not in the phone's original country. The OTA updates came over wifi.
If you want to use another ROM, you can install TWRP, boot into TWRP, flash bootloader, flash modem, flash custom ROM, flash gapps. If flashing the modem bootloader in TWRP, DO NOT reboot the phone in between flashing this files and make sure the bootloader and modem version are made for each other.
Could someone help me? Every time I install a rom, I get the following message after the dribble. Process system is not responding it comes out absolutely with all the roms, less with the stock (currently I want to put lineage os) and sorry if something is wrongly written I speak Spanish .. thank you all :crying:
Which recovery are you using to flash the phone? Provide an example of a ROM that won't start. You confirmed that the phone model is sgh-i747 in download mode? Phone is running the latest 4.4.2 bootloader and modem?
.
audit13 said:
Which recovery are you using to flash the phone? Provide an example of a ROM that won't start. You confirmed that the phone model is sgh-i747 in download mode? Phone is running the latest 4.4.2 bootloader and modem?
Click to expand...
Click to collapse
Yes, it's a sgh-i747 recovery that I use is twrp 2.8 (with 3.0 pass the same) example of roms lineageos RR CM12.1. 13 and 14 I do not know what version of bootloader I have
Was 4.4.2 the last stock ROM running on the phone? If it was, the phone would be running the latest bootloader and modem. You can also confirm the bootloader and modem by installing the Samsung Phone Info app from the Play store.