fastboot reboot stuck - Huawei Ascend P6, Mate

Hi
I looked in fastboot if my bootloader is open, than i tried to flash TWRP it gave me an error. Now i try do reboot my phone with fastboot reboot and nothing happen!
I need help please:

taaeem said:
Hi
I looked in fastboot if my bootloader is open, than i tried to flash TWRP it gave me an error. Now i try do reboot my phone with fastboot reboot and nothing happen!
I need help please:
Click to expand...
Click to collapse
1) Did you install the drivers for Huawei p6?
2) Is your phone connected to the computer?
3) Are you in the fastboot folder?
If any of the 3 above aren't done, try installing driver, reconnnect to the computer, or get into the fastboot folder in cmd.
If you did all these, I would try forcing the phone to reboot by holding down the power button for 10 seconds. It should just reboot into the system. It is not my fault if doesn't works tho.

bokchoi2020 said:
1) Did you install the drivers for Huawei p6?
2) Is your phone connected to the computer?
3) Are you in the fastboot folder?
If any of the 3 above aren't done, try installing driver, reconnnect to the computer, or get into the fastboot folder in cmd.
If you did all these, I would try forcing the phone to reboot by holding down the power button for 10 seconds. It should just reboot into the system. It is not my fault if doesn't works tho.
Click to expand...
Click to collapse
I did it with force reboot and worked everything okay

taaeem said:
I did it with force reboot and worked everything okay
Click to expand...
Click to collapse
Hahah glad I can help ;D

Related

[Q] [PROBLEM] htc desire recovery - volume keys not working

Hi!
I recently rooted my Desire with unrevoked 3 and I installed the ReflexS rom. Everything worked perfectly!
I was curious for Cyanogenmod and I downloaded version 7.0.3 directly through Rom Manager. When the download was completed it suggested to install which I agreed. I think clear Dalvik cache was marked, but clear data cache was not. I agreed... maybe my first mistake.
After this Cyanogenmod was installed, but my Desire stayed on the boot screen (sakteboarding android with running arrow) for over 30min so I took out the battery. I restarted and it goes well until the android setup screen "tap the android to begin". I can tap and it gets glowing, but it does not continue! I can not go any further than this. The only thing I can do is choose a language or shutdown.
To overcome this issue I thought of recovering/reinstalling my previous ROM. I also have a Titanium backup.
Now here's the problem: when start up into recovery, my volume buttons won't work so I can not enter into the recovery menu.
What should I do?
I'm getting desperate, because my phone is down at the moment!
Thanks for your help!
you mean volume buttons dont work in recovery or in bootloader ?
in recovery you can navigate using trackpad, in bootloader you must wait around 10-15 seconds until you can use volume buttons to navigate.
and yes it was a BIG mistake not to make a wipe before the flashing of cyanogenmod....
you should have done a full wipe
Ok will firstly, go to the Cyanogenmod stable topic to read how to install out. Secondly, avoid rom manager. Thirdly, to boot into recovery, boot your phone like normal and plug your phone into your pc. After about 20 second the usb will kick in. This is where you use the adb reboot recovery command in command prompt or terminal. Enjoy.
Swyped...
Meaple said:
... After about 20 second the usb will kick in. This is where you use the adb reboot recovery command in command prompt or terminal. Enjoy.
Swyped...
Click to expand...
Click to collapse
can you explain for noobs how to do it? PLEASE!!!
thank you anyway
boot into fastbood mode (hold BACK and POWER).
unzip the attached file into your C:\
open command prompt (accessories)
type
Code:
cd\
fastboot oem gencheckpt
your phone will boot into recovery.
Bortak and Meaple ..... THANK YOU!!!
Mine says waiting for device and nothing happens after I type in the command
dark_polok said:
Mine says waiting for device and nothing happens after I type in the command
Click to expand...
Click to collapse
Do you have the drivers installed? You van try installing and then uninstall HTC Sync to get the drivers.
Sent from my HTC Original Desire with Android 4.0.3 ICS using Tapatalk
I am pretty sure you did not install ADB (correctly). Check my sig how to do.
After Ruu ROM installing, can`t gen in RECOVERY mode
Someone can help me..
I Install RUU ROM from Windows, and then i can`t go to recovery mode in fastboot.. how i can it solved????
I have - revolutionary s-off
Please.. HELP ME!!!
Check bortak's troubleshooting guide.
Sent from my HTC Desire using Tapatalk
bortak said:
boot into fastbood mode (hold BACK and POWER).
unzip the attached file into your C:\
open command prompt (accessories)
type
Code:
cd\
fastboot oem gencheckpt
your phone will boot into recovery.
Click to expand...
Click to collapse
What if your phone doesn't boot into recovery in this case and you get an error that says "FAILED (Status Malformed (1 bytes))"?
dzeksis said:
Someone can help me..
I Install RUU ROM from Windows, and then i can`t go to recovery mode in fastboot.. how i can it solved????
I have - revolutionary s-off
Please.. HELP ME!!!
Click to expand...
Click to collapse
You can alwys get into recovery through the adb shell.
Hi.
I know this tread is old but the issue is relevant because this is still a persistant problem.First of all thanks for the tip and second i have great,great news !!! you dont even have to deassemble the phone to put the up down button to work.Just insert the alcool UNDER the volume button with a seringe with a needle and click the button for a minute or two...wait until the alcool evaporates and VOILÁ !! problem fixem !! Not need todeassemble or using adb.Just do this and you will be fine.

[Q] Huawei G510 stuck at logo

My Huawei G510 is stuck at logo after rooting device. It is not unlocked from Huawei. What to do. Tried several things unable to load.
HuaweiG510 said:
My Huawei G510 is stuck at logo after rooting device. It is not unlocked from Huawei. What to do. Tried several things unable to load.
Click to expand...
Click to collapse
I think you should download firmware for your mobile and flash it.Put the firmware in sdcard/dload/update.app.Now press insert sd card and press vol+ vol- and power button.
Install firmware and also go to recovery mode and wipe cache :highfive:
Hope this works !!
Thanks dear. It worked.
hannanzikrea said:
I think you should download firmware for your mobile and flash it.Put the firmware in sdcard/dload/update.app.Now press insert sd card and press vol+ vol- and power button.
Install firmware and also go to recovery mode and wipe cache :highfive:
Hope this works !!
Click to expand...
Click to collapse
HuaweiG510 said:
Thanks dear. It worked.
Click to expand...
Click to collapse
If that worked U can press thanks :good: button
hannanzikrea said:
I think you should download firmware for your mobile and flash it.Put the firmware in sdcard/dload/update.app.Now press insert sd card and press vol+ vol- and power button.
Install firmware and also go to recovery mode and wipe cache :highfive:
Hope this works !!
Click to expand...
Click to collapse
Hi, I have the same problem and I followed your instructions but while the new firmware is installing from the sd card, the phone shut down.
It seems like it has no sufficient power to finish the operation. In fact I tried to plug the phone to charge the battery and that don't work...at least the led is not on (but I'm pretty sure it's not charging).
After that the only things I can do is to power on again and see the boot loop.
Any idea on how to solve?
Thanks.
poirot13 said:
Hi, I have the same problem and I followed your instructions but while the new firmware is installing from the sd card, the phone shut down.
It seems like it has no sufficient power to finish the operation. In fact I tried to plug the phone to charge the battery and that don't work...at least the led is not on (but I'm pretty sure it's not charging).
After that the only things I can do is to power on again and see the boot loop.
Any idea on how to solve?
Thanks.
Click to expand...
Click to collapse
Shutdown or reboots? The op said that was a G510 and this is the P6 forum
Probably you have the recovery corrupted, you need to reflash stock recovery again via fastboot
THIS IS FOR THE Ascend P6, NOT for the G510
S34Qu4K3 said:
Shutdown or reboots? The op said that was a G510 and this is the P6 forum
Probably you have the recovery corrupted, you need to reflash stock recovery again via fastboot
THIS IS FOR THE Ascend P6, NOT for the G510
Click to expand...
Click to collapse
Shutdown. Then if I press the power button or simply I plug the phone to charge the battery, start again to bootloop.
Can you please tell me how to do?
poirot13 said:
Shutdown. Then if I press the power button or simply I plug the phone to charge the battery, start again to bootloop.
Can you please tell me how to do?
Click to expand...
Click to collapse
My problem was that when into the original recovery, after a few seconds, phone reboots and back up to kernel logo
The full command for flash is: fastboot flash recovery recovery_original_flashable.img
Info:
http://forum.xda-developers.com/showthread.php?t=2131284
http://androidforums.com/desire-all...boot-windows-updated-1st-june-2011-a.html#”8”
S34Qu4K3 said:
My problem was that when into the original recovery, after a few seconds, phone reboots and back up to kernel logo
The full command for flash is: fastboot flash recovery recovery_original_flashable.img
Info:
http://forum.xda-developers.com/showthread.php?t=2131284
http://androidforums.com/desire-all...boot-windows-updated-1st-june-2011-a.html#”8”
Click to expand...
Click to collapse
It happens the same to me, but I don't know how to do.
I'm a newbie and I'm not familiar with this command...could you kindly explain what I have to do step by step?
I posted you fastboot noob-friendly tutorials
1st you need fastboot installed and P6 and fastboot drivers
Asumming you already have downloader the image and you are in windows, open a cmd promp and navigate (using cd command) to your fastboot directory, place recovery_original_flashable.img in this folder. If your phone is shutdown, hold vol- and plug the usb cable (if it's continuous rebooting, hold vol- and power button until phone reboots and kernel logo come up)
Type on the cmd promt: fastboot devices , if you see under devices attached, ??????????? or numbers and letters, your phone is connected into fastboot mode
If you don't have this, check if the drivers was correctly installed.
With the phone connected in fastboot mode, type in the cmd promt: fastboot flash recovery recovery_original_flashable.img
After this command finish, type fastboot reboot and enter into the default recovery and try to update the system
I not guarantee the exit of this operation, this solved my problem, but maybe yours not. If you aren't sure, ask here or send phone to your repair center
S34Qu4K3 said:
I posted you fastboot noob-friendly tutorials
1st you need fastboot installed and P6 and fastboot drivers
Asumming you already have downloader the image and you are in windows, open a cmd promp and navigate (using cd command) to your fastboot directory, place recovery_original_flashable.img in this folder. If your phone is shutdown, hold vol- and plug the usb cable (if it's continuous rebooting, hold vol- and power button until phone reboots and kernel logo come up)
Type on the cmd promt: fastboot devices , if you see under devices attached, ??????????? or numbers and letters, your phone is connected into fastboot mode
If you don't have this, check if the drivers was correctly installed.
With the phone connected in fastboot mode, type in the cmd promt: fastboot flash recovery recovery_original_flashable.img
After this command finish, type fastboot reboot and enter into the default recovery and try to update the system
I not guarantee the exit of this operation, this solved my problem, but maybe yours not. If you aren't sure, ask here or send phone to your repair center
Click to expand...
Click to collapse
It works!!! You are simply a genius!
Thanks a lot. :laugh:
Glad to help
Sent from my HUAWEI P6-U06 using xda app-developers app
S34Qu4K3 said:
Glad to help
Sent from my HUAWEI P6-U06 using xda app-developers app
Click to expand...
Click to collapse
hey man, ur posts in this thread were a real big help for me, i accidently wiped my stock recovey (dont ask ) and got stuck at the boot logo with nothing working at all and ofcourse froce updating wont work in apsence of recovery (put update.app on sdcard/dload bla bla)
so i downloaded the stock recovery you posted and flashed it via adb after i got my pc to see my device with ur combination back in post #10 (hold power and vol - buttons while plugged to pc) and everything went great
thanks for your help man, really can't thank u enough, thought my device was hardbricked
Mine doesnot work
hannanzikrea said:
I think you should download firmware for your mobile and flash it.Put the firmware in sdcard/dload/update.app.Now press insert sd card and press vol+ vol- and power button.
Install firmware and also go to recovery mode and wipe cache :highfive:
Hope this works !!
Click to expand...
Click to collapse
I am using Huawei G 510-0200 in Pakistan. I had rooted my cell phone and was converting a user app into system app via Titanium backup. The process was taking long time so force closed Titanium Backup app. This caused phone crash and it restarted and hung up at huawei logo.
Now i tried factory data reset and clearing cache in Power and Volume + key mode. It did not work. I tried applying update (two different roms, one custom pakistani rom and other was normal g510-0200 rom) in the same mode but it shows installation aborted.
I tried Forced Firmware Update mode too. I placed update.app file in the sd card and restarted cell phone by holding Volume+, Volume- and Power key. In that mode, it shows unpacking Step 1/2 for a while and then instead of installing, it shows Update Failed.
Error log shows this:
filename = /mmc1/dload/update.app call RCV_MODULE_END_EVENT failed,module = OEMSBL_VER_LIST CMD=0xf,moduleaddr = 0xd2000000, len_tmp=0x4000
I have tried everywhere and I'll be really greatful if you can sort this out for me. :crying:
hi
S34Qu4K3 said:
Shutdown or reboots? The op said that was a G510 and this is the P6 forum
Probably you have the recovery corrupted, you need to reflash stock recovery again via fastboot
THIS IS FOR THE Ascend P6, NOT for the G510
Click to expand...
Click to collapse
Good bless you. It worked also for me. Thank you very muck , thank you thank you.
No luck.
S34Qu4K3 said:
I posted you fastboot noob-friendly tutorials
1st you need fastboot installed and P6 and fastboot drivers
Asumming you already have downloader the image and you are in windows, open a cmd promp and navigate (using cd command) to your fastboot directory, place recovery_original_flashable.img in this folder. If your phone is shutdown, hold vol- and plug the usb cable (if it's continuous rebooting, hold vol- and power button until phone reboots and kernel logo come up)
Type on the cmd promt: fastboot devices , if you see under devices attached, ??????????? or numbers and letters, your phone is connected into fastboot mode
If you don't have this, check if the drivers was correctly installed.
With the phone connected in fastboot mode, type in the cmd promt: fastboot flash recovery recovery_original_flashable.img
After this command finish, type fastboot reboot and enter into the default recovery and try to update the system
I not guarantee the exit of this operation, this solved my problem, but maybe yours not. If you aren't sure, ask here or send phone to your repair center
Click to expand...
Click to collapse
when entered the command for original recovery its says 'error:cannot load recovery_original_flashable.img'
S34Qu4K3 said:
Glad to help
Sent from my HUAWEI P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Hello !!
Model Huwaei : Asceud G510 -- G510-0200
Problem : Stuck On Logo Flash Done
I Have Same Handset-Stuck On Huwaei Logo ! Already Flashed !!
With
HUAWEI-Ascend-G510-firmware(G510-0200,Android_4.1,Emotion_UI,V100R001C00B173,Normal,05011EUC)
Above File But Same Frimware Update Done !! But Sam Stuck On Huwaei Or Restart
Any Guidence- @ ?
please my p6 is stucked at bootloop and when i go to recovery it says unable to mount cache,plz any help

[Q] Factory reset and flashed a new rom. I have no google apps, recovery won't load.

I have google apps in a .zip, but no way to access them. My recovery won't load. It's stuck on "checking SD card update..."
How do I fix this or have I turned my phone into a paperweight?
ashleynicholson said:
I have google apps in a .zip, but no way to access them. My recovery won't load. It's stuck on "checking SD card update..."
How do I fix this or have I turned my phone into a paperweight?
Click to expand...
Click to collapse
try other custom recovery.
robchongke said:
try other custom recovery.
Click to expand...
Click to collapse
I have no idea how to do that.
ashleynicholson said:
I have no idea how to do that.
Click to expand...
Click to collapse
are you on sense 5 already? you have to flash it via fastboot comman in CMD.
robchongke said:
are you on sense 5 already? you have to flash it via fastboot comman in CMD.
Click to expand...
Click to collapse
I've been running CM for several months, I've never had Sense 5. I installed the new CM Nightly, and it wouldn't boot, so I had to factory reset my phone and flash an old version of CM. It booted, but the Gapps didn't install. Now when I go back into my recovery (Clockwork), it won't load properly.
ashleynicholson said:
I've been running CM for several months, I've never had Sense 5. I installed the new CM Nightly, and it wouldn't boot, so I had to factory reset my phone and flash an old version of CM. It booted, but the Gapps didn't install. Now when I go back into my recovery (Clockwork), it won't load properly.
Click to expand...
Click to collapse
download any custom recovery here. http://forum.xda-developers.com/showthread.php?t=1832891
put the recovery in your fastboot folder
rename it to recovery.img
enter this command one at a time
fastboot flash recovery recovery.img
fastboot erase cache
then reboot your phone to recovery
robchongke said:
download any custom recovery here. http://forum.xda-developers.com/showthread.php?t=1832891
put the recovery in your fastboot folder
rename it to recovery.img
enter this command one at a time
fastboot flash recovery recovery.img
fastboot erase cache
then reboot your phone to recovery
Click to expand...
Click to collapse
Is that the windows version?
ashleynicholson said:
Is that the windows version?
Click to expand...
Click to collapse
yes. I'm using windows 7
robchongke said:
yes. I'm using windows 7
Click to expand...
Click to collapse
Ok. Does it matter that I'm using a different computer than the one I used originally?
How exactly do I do this, does my phone need to be on or off or what's the story?
Thanks very much.
ashleynicholson said:
Ok. Does it matter that I'm using a different computer than the one I used originally?
How exactly do I do this, does my phone need to be on or off or what's the story?
Thanks very much.
Click to expand...
Click to collapse
phone must be in bootloader and you need fastboot files. how come your phone is on CM10 yet you don't know this fastboot thing?
robchongke said:
phone must be in bootloader and you need fastboot files. how come your phone is on CM10 yet you don't know this fastboot thing?
Click to expand...
Click to collapse
I had great trouble doing it the last time. It took me several hours and I came close to bricking it a few times. I'm pretty technologically incapable. It's my bootloader thing that won't load anyway, so that's no use to me.
Is there any chance you could be a saint and compile together detailed instructions for me? If not, no worries, but I'm a bit of an idiot.
ashleynicholson said:
I had great trouble doing it the last time. It took me several hours and I came close to bricking it a few times. I'm pretty technologically incapable. It's my bootloader thing that won't load anyway, so that's no use to me.
Is there any chance you could be a saint and compile together detailed instructions for me? If not, no worries, but I'm a bit of an idiot.
Click to expand...
Click to collapse
if you dont have htc driver installed in your computer just download and install htc sync manager.
i only use fastboot. here is the file. http://www.mediafire.com/download/q2540u4g3v6qqd7/Fastboot.zip
extract the fastboot zip file and put it in your desktop.
put your downloaded custom recovery inside the fastboot folder. rename it to recovery.img
boot your phone into bootloader press power button+volume down. dont release until you see this.
https://www.google.com.ph/search?q=bootloader+htc+one+x&client=firefox-a&hs=UrW&rls=org.mozilla:en-USfficial&source=lnms&tbm=isch&sa=X&ei=JGZcUuDFEsaoiAf6rYCABA&ved=0CAkQ_AUoAQ&biw=1262&bih=645#facrc=_&imgdii=_&imgrc=OCSTXEIwH8T3jM%3A%3BHGXrRqPSLDR5xM%3Bhttp%253A%252F%252Fcdn2.ubergizmo.com%252Fwp-content%252Fuploads%252F2012%252F05%252Fone-x-boot.jpg%3Bhttp%253A%252F%252Fwww.ubergizmo.com%252F2012%252F05%252Fatt-htc-one-x-bootloader-unofficially-unlocked%252F%3B640%3B459
now in your pc navigate to start>run then type cmd
one you're in command prompt. navigate to where your fastboot folder is. like this C:\Users\ashleynicholson\desktop\fastboot>
you can now enter these two commands. one at a time
fastboot flash recovery recovery.img
fastboot erase cache
you now have custom recovery. reboot your phone.
robchongke said:
if you dont have htc driver installed in your computer just download and install htc sync manager.
i only use fastboot. here is the file. http://www.mediafire.com/download/q2540u4g3v6qqd7/Fastboot.zip
extract the fastboot zip file and put it in your desktop.
put your downloaded custom recovery inside the fastboot folder. rename it to recovery.img
boot your phone into bootloader press power button+volume down. dont release until you see this.
https://www.google.com.ph/search?q=...x-bootloader-unofficially-unlocked%2F;640;459
now in your pc navigate to start>run then type cmd
one you're in command prompt. navigate to where your fastboot folder is. like this C:\Users\ashleynicholson\desktop\fastboot>
you can now enter these two commands. one at a time
fastboot flash recovery recovery.img
fastboot erase cache
you now have custom recovery. reboot your phone.
Click to expand...
Click to collapse
If you hold shift and right click in side the fastboot folder, it will open a cmd window in that location.
To navigate in cmd you use the CD command
E.g
CD C:\\ will take you to the root of C drive.
CD C:\\fastboot will take you to the folder "fastboot" and so on.
Sent from my HTC One X using xda app-developers app
Ok, I've figured out what I was doing wrong. I had my phone plugged into the USB while trying to load the bootloader, and of course that wouldn't work. All is well now, thanks very much.
Sent from my HTC One X using xda app-developers app

[Q] Bricked Ascend P6 after flashing recovery

Hi There, I Tried To Install The TWRP Recovery Using Recovery Tools - Flasher, It Succeeded, And Asked To Reboot My Phone, Now My Huawei Ascend P6 Is Not Booting, Its Stuck On The "Huawei Ascend" Screen, I Cant Access Recory Or Booot My Phone. Can You Help Me Please?
You should have followed the tutorials to flash TWRP on here... Does adb recognize your phone?
Sent from my P6-U06 using XDA Premium 4 mobile app
lootjelo said:
You should have followed the tutorials to flash TWRP on here... Does adb recognize your phone?
Sent from my P6-U06 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I Tried And It Didnt Work, Kept On Getting Stuck On Waiting For Device, And No, adb Cant See My Phone
If you can't boot into any mode, your best bet would be bringing it to service and playing dumb about as to why your phone is bricked...
Sent from my P6-U06 using XDA Premium 4 mobile app
lootjelo said:
If you can't boot into any mode, your best bet would be bringing it to service and playing dumb about as to why your phone is bricked...
Sent from my P6-U06 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Isnt There Anything Else I Can Try Before Taking It To Service? I Live Too Far From The Nearest Store I Can take It To, It Would Cost a Lot For Me To Take It There.
mcselowa said:
Isnt There Anything Else I Can Try Before Taking It To Service? I Live Too Far From The Nearest Store I Can take It To, It Would Cost a Lot For Me To Take It There.
Click to expand...
Click to collapse
I really wouldn't know: you can't boot into recovery and adb doesn't recognise it... Did you install the drivers for your phone on your pc? Try installing HiSuite... Then check if adb recognises your phone.
Sent from my amazing Ascend P6
lootjelo said:
I really wouldn't know: you can't boot into recovery and adb doesn't recognise it... Did you install the drivers for your phone on your pc? Try installing HiSuite... Then check if adb recognises your phone.
Sent from my amazing Ascend P6
Click to expand...
Click to collapse
I Have HiSuite, But Before My Phone Got Bricked, HiSuite Could See It, But adb Couldnt, Now Both Cant See It
mcselowa said:
I Have HiSuite, But Before My Phone Got Bricked, HiSuite Could See It, But adb Couldnt, Now Both Cant See It
Click to expand...
Click to collapse
Sorry man: then I wouldn't know what to do anymore...
Sent from my amazing Ascend P6.
Powered by MIUI v5.
mcselowa said:
I Have HiSuite, But Before My Phone Got Bricked, HiSuite Could See It, But adb Couldnt, Now Both Cant See It
Click to expand...
Click to collapse
Have you tried using the 3 buttons combo to flash stock firmware?
Download any UPDATE.APP put inside your sdcard inside a folder named dload so it should look like:
sdcard/dload/UPDATE.APP
Then just keep pressing Power+Volume UP+Volume Down buttons at the same time. this will force your phone to to into recovery (either TWRP or Stock). If this does not work try the following.
While Pressing both Power+Volume Down buttons connect your phone to the PC, it will look like the phone is again "stucked" in Huawei Ascend Logo, then usging a cmd inside the fastboot and adb folder type
fastboot devices
If you get any reply from cmd just flash twrp recovery again (manually this time)
How can he try update.app solution if he has custom recovery, he does not have a stock recovery, so your solution is pointless.
dekosteka said:
How can he try update.app solution if he has custom recovery, he does not have a stock recovery, so your solution is pointless.
Click to expand...
Click to collapse
Pointless?
Have actually read what I wrote? He said, the program he used told him it succeed and now his phone is stuck. So it migth have worked or not, meaning that TWRP might or not be succesfully installed in his phone. And I also wrote that if that doesn't work (Meaning he can't boot to recovery by the combo) he can try to reboot the phone to fastboot and flash again either TWRP or Stock Recovery back to the phone...
So your reply was the pointless one here, not mine...
jimbo77 said:
Have you tried using the 3 buttons combo to flash stock firmware?
Download any UPDATE.APP put inside your sdcard inside a folder named dload so it should look like:
sdcard/dload/UPDATE.APP
Then just keep pressing Power+Volume UP+Volume Down buttons at the same time. this will force your phone to to into recovery (either TWRP or Stock). If this does not work try the following.
While Pressing both Power+Volume Down buttons connect your phone to the PC, it will look like the phone is again "stucked" in Huawei Ascend Logo, then usging a cmd inside the fastboot and adb folder type
fastboot devices
If you get any reply from cmd just flash twrp recovery again (manually this time)
Click to expand...
Click to collapse
I Tried The 2nd Option And The Phone Appears On My PC As Android Single ADB Interface, And After Attempting The Command All I Got Was What is On The Picture I Attached
mcselowa said:
I Tried The 2nd Option And The Phone Appears On My PC As Android Single ADB Interface, And After Attempting The Command All I Got Was What is On The Picture I Attached
Click to expand...
Click to collapse
That's fine! That means your phone is booting into fastboot.
So now you should try to manually install TWRP to the phone just download TWRP recovery from this Thread:
http://forum.xda-developers.com/showthread.php?t=2534420
make sure to download latest version, and then rename it to twrp-recovery.img
After that put the file inside the folder where you have fastboot and adb.
type again fastboot devices and make sure you get the same output from CMD (a lot of ? signs)
and then type:
fastboot flash recovery twrp-recovery.img
after that
fastboot reboot
the phone will try to boot into system, if it fails try the three button combo and the you should be able to boot into TWRP Recovery.
Good Luck!
jimbo77 said:
That's fine! That means your phone is booting into fastboot.
So now you should try to manually install TWRP to the phone just download TWRP recovery from this Thread:
http://forum.xda-developers.com/showthread.php?t=2534420
make sure to download latest version, and then rename it to twrp-recovery.img
After that put the file inside the folder where you have fastboot and adb.
type again fastboot devices and make sure you get the same output from CMD (a lot of ? signs)
and then type:
fastboot flash recovery twrp-recovery.img
after that
fastboot reboot
the phone will try to boot into system, if it fails try the three button combo and the you should be able to boot into TWRP Recovery.
Good Luck!
Click to expand...
Click to collapse
Im Now Trying To Flash The Recovery, @ 1st It Says Failed(Remote: Flash Failure, errno2) Second Time I Typed Fastboot devices again And It Returns ??????????? Fastboot, Which Is Diff From Previous Result. Then I Try To Flash Again And Its Stuck Saying : Sending 'recovery' (8262)...
mcselowa said:
Im Now Trying To Flash The Recovery, @ 1st It Says Failed(Remote: Flash Failure, errno2) Second Time I Typed Fastboot devices again And It Returns ??????????? Fastboot, Which Is Diff From Previous Result. Then I Try To Flash Again And Its Stuck Saying : Sending 'recovery' (8262)...
Click to expand...
Click to collapse
If TWRP fails try to flash stock recovery just name the file as recovery.img and use
fastboot flash recovery recovery.img
if that also fails, the I guess you last chance is to take to a repair center my friend...
jimbo77 said:
If TWRP fails try to flash stock recovery just name the file as recovery.img and use
fastboot flash recovery recovery.img
if that also fails, the I guess you last chance is to take to a repair center my friend...
Click to expand...
Click to collapse
Thank You Soo Much, It Finally Worked, I Changed Cables And It Worked. I Am So Grateful Right Now!
does it works for mate in b907 (4.2.2) ?
Thx

Question What to do? Phone stuck on fastboot

Phone is stuck on fastboot after following steps in flashing rom which was wipe dalvik and now is stuck on fastboot
Dernasurboi said:
Phone is stuck on fastboot after following steps in flashing rom which was wipe dalvik and now is stuck on fastboot
Click to expand...
Click to collapse
Need more information. What rom? What steps did you do?
1finger said:
Need more information. What rom? What steps did you do?
Click to expand...
Click to collapse
First I wiped dalvik and when that happened I couldn't find my rom on my internal storage. Then I tried to get out of twrp because when phone reboots it just went to it automatically. Then I tried to flash a stock miui thinking it would solve the problem but it still didn't work. And now its stuck on fastboot
Dernasurboi said:
First I wiped dalvik and when that happened I couldn't find my rom on my internal storage. Then I tried to get out of twrp because when phone reboots it just went to it automatically. Then I tried to flash a stock miui thinking it would solve the problem but it still didn't work. And now its stuck on fastboot
Click to expand...
Click to collapse
Are you able to use any fastboot commands when connected to your PC?
Veiranx said:
Are you able to use any fastboot commands when connected to your PC?
Click to expand...
Click to collapse
yes I am able to use commands via pc
Try command "fastboot continue"
ApexPrime said:
Try command "fastboot continue"
Click to expand...
Click to collapse
it just says "FAILED (remote: Failed to load image from partition: Load Error)"
Just clean flash using miflash and start over
ApexPrime said:
Just clean flash using miflash and start over
Click to expand...
Click to collapse
This is the way.
Dernasurboi said:
Phone is stuck on fastboot after following steps in flashing rom which was wipe dalvik and now is stuck on fastboot
Click to expand...
Click to collapse
If your phone is stuck in fastboot mode after following steps to flash a ROM and wiping the dalvik cache, here are some steps you can try:
Try restarting your phone by holding down the power button for a few seconds. If it doesn't respond, you can try holding down the power button and the volume up button together for a few seconds to see if that triggers a restart.
If restarting the phone doesn't work, try disconnecting it from any cables or power sources and then holding down the power button for at least 10-15 seconds to force a shutdown. Once the phone is off, you can try turning it on again to see if it boots up normally.
If the phone is still stuck in fastboot mode, you can try connecting it to a computer and using the fastboot commands to flash a new ROM or restore a backup. You can find instructions on how to do this online for your specific device.
If none of these steps work, you may need to seek assistance from a professional or contact the manufacturer for support. It's also possible that there is a hardware issue with the phone that needs to be addressed.
I suggest watching Munchy's videos on how to flash a ROM. He does good, easy to understand guides.

Categories

Resources