Hey everyone the headphone connector on my note 2 is broken and i have to give it to samsung for the repairs
However as i have rooted the phone earlier when it was on the 4.2 the counter is set to 4
and also i have upgraded it to 4.3 which has the knox and now it's not letting me root the 4.3
please tell me how to root the 4.3 i have tried the safe root it simply restarts the phone but no root
i am attaching the screen shot of the firmware details
plz help ASAP as i have to give it for the repairs
and many many thanks
serein1 said:
Hey everyone the headphone connector on my note 2 is broken and i have to give it to samsung for the repairs
However as i have rooted the phone earlier when it was on the 4.2 the counter is set to 4
and also i have upgraded it to 4.3 which has the knox and now it's not letting me root the 4.3
please tell me how to root the 4.3 i have tried the safe root it simply restarts the phone but no root
i am attaching the screen shot of the firmware details
plz help ASAP as i have to give it for the repairs
and many many thanks
Click to expand...
Click to collapse
Hello @serein1,
Are you 100% sure you completed the saferoot instructions completely? Also, a good way to test if you do have root is to download Root Checker Also from mine and my friends experience with samsung repairs, they don't care about having a rooted status or a custom status if it has to do with hardware. But, Not everyone is the same at samsung ... Also check if Knox is voided because safe root does not trigger Knox to be disabled. Lastly, if you don't want to risk not getting it repaired I would flash Stock rom using Odin.
Downgrade to stock 4.1.2 rom, then root it, use triangle away to reset the counter and then do the compete unroot.
Done.
Sent from galaxy n7105
jakuburban said:
Downgrade to stock 4.1.2 rom, then root it, use triangle away to reset the counter and then do the compete unroot.
Done.
Sent from galaxy n7105
Click to expand...
Click to collapse
I am sorry to hijack the topic but have about the same prob.
eally just need a link for a stock rom 4.1.2 and the instructions to make it work with odin.
I mean where to put the files in pda phone and so on.
Thanks everyone
I have tried the instructions as mentioned for the safe root
it gives error unsupported device and then goes away
there's another thing I have noticed the safe root command prompt window on the top says S4 and not note 2 however I have downloaded the safe root from the note 2 forum section
The knox counter is already set to 1 now DAMN
I also would like to go back to the 4.1.2 and while downgrading using the ODIN it says unsupported on the phone screen and doesn't flashes the phone
How do we downgrade from the 4.3 that has the knox to the 4.1.2
thanks again
ikkeenjij36 said:
I am sorry to hijack the topic but have about the same prob.
eally just need a link for a stock rom 4.1.2 and the instructions to make it work with odin.
I mean where to put the files in pda phone and so on.
Click to expand...
Click to collapse
Try to find some firmware on sammobile site or here on xda (just search for the word stock).
After that You put the phone into a download mode, connect it to a PC and choose the downloaded (extracted) firmware under the pda/ap button.
Thanks that worked and it is back to stock now.
Now just get the flash counter back to 0 again.
Everything worked out fine and is temporarly replaced by an s3
Sent from my GT-I9300 using XDA Premium 4 mobile app
@ikkeenjij36 how come you can downgrade to stock 4.1.2? Can you show me? What I know is that, bootloader from MK4 above cannot be downgraded, unless you're MJ5 and you need to use Dr.ketan bootloader patch.
ikkeenjij36 said:
Everything worked out fine and is temporarly replaced by an s3
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Why did you downgrade to an s3 n.a.
Sent from my SCH-I545 using xda app-developers app
Naruto1215 said:
@ikkeenjij36 how come you can downgrade to stock 4.1.2? Can you show me? What I know is that, bootloader from MK4 above cannot be downgraded, unless you're MJ5 and you need to use Dr.ketan bootloader patch.
Click to expand...
Click to collapse
I think You can flash some 4.1.2 ROM via CWM and then You will be able to flash some stock 4.1.2.
Related
i need to unroot my s3 for warranty purposes but i cannot find proper procedures for the the model sgh-t999v..
i have 2 questions,
1. can i just root a stock rom for sgh-t999 to my sgh-t999v?
2. anyone have the procedures to unroot my sgh-t999v
thanks
Flash a stock rooted Rom. T-Mobile one. That seems to be ok as long as you don't flash a T-Mobile radio.
Not sure if triangle away works on the Canadian version.
Maybe someone else has tried it.
All I had to do to return my last one was flash a stock rooted Rom.
I don't think they check the flash counter
Sent from my SGH-T999 using xda premium
---------- Post added at 08:52 AM ---------- Previous post was at 08:48 AM ----------
If the Rom has some T-Mobile bloat left on it get it off there.
Hide superuser in a folder
Sent from my SGH-T999 using xda premium
Thanks, ill try it tonight
Sent from my SGH-T999V using xda app-developers app
Or you can download the actual fw for your device. You will have to register but its no big deal.
Www.sammobile.com/firmware
11 Years Ago Today...
WE WILL NEVER FORGET!!!
GOD BLESS AMERICA!!!
I can see you have a Videotron Galaxy S3. They don't check the flash counter. Let's just say I know this "by experience". As long as it's just rooted and you don't have any custom ROM, you should be fine. But indeed if you can at least hide the SU app it would be a good thing.
You could also perform a factory reset in CWM prior to going to the store, as they will make you do it anyways (and you actually don't want them to see the CWM screen)prior to any exchange. It's company policy.
lightpsycho said:
I can see you have a Videotron Galaxy S3. They don't check the flash counter. Let's just say I know this "by experience". As long as it's just rooted and you don't have any custom ROM, you should be fine. But indeed if you can at least hide the SU app it would be a good thing.
You could also perform a factory reset in CWM prior to going to the store, as they will make you do it anyways (and you actually don't want them to see the CWM screen)prior to any exchange. It's company policy.
Click to expand...
Click to collapse
It's still probably safer to just use Triangle Away to get rid of the flash counter
Triangle away? Please explain
Sent from my SGH-T999V using xda app-developers app
yukuansu said:
Triangle away? Please explain
Sent from my SGH-T999V using xda app-developers app
Click to expand...
Click to collapse
Heres everything to know about triangle away, it resets the flash counter...
http://forum.xda-developers.com/showthread.php?t=1494114
Jake
T-Mobile & SGH-T999V
Hi,
Can we use the T-Mobile stock recovery on SGH-T999V?
flyerspat said:
Hi,
Can we use the T-Mobile stock recovery on SGH-T999V?
Click to expand...
Click to collapse
If your trying to go back to stock, just download the stock rom from sammobile, it has everything you need like stock recovery, and then just flash it via odin.
htc fan89 said:
If your trying to go back to stock, just download the stock rom from sammobile, it has everything you need like stock recovery, and then just flash it via odin.
Click to expand...
Click to collapse
Hi,
The only downloads availables are the firmwares, does it include the stock recovery in it?
flyerspat said:
Hi,
The only downloads availables are the firmwares, does it include the stock recovery in it?
Click to expand...
Click to collapse
Yes it should be the full fw which includes radio, recovery and more.
Sent from my SGH-T999 using xda app-developers app
Thanks!
I'll test it tonight, wouldn't look good to download a 700 mb file at work!
I tried a few firmwares, but for some reason they all said "unsupport dev_type" when trying to use odin to return to stock non root (from stock rooted) In the end, the easiest way to remove root was to just let Kies update my gs3 to Jelly Bean (sgh-t999v). Painless, no data loss, took about 30 minutes with the firmware download.
Good luck
You will likely also want to triangle away. I won't link because it's extremely dangerous software that requires you to read up on the risks.
But that will reset your custom flashes assuming you have some on your counter you can check easily by going into download mode.
i recently lost my stock rom backup.. deleted it off clockworkmod touch by accident, so i only have the cm10.1 nightly i was running when i deleted it.. now i'm assuming i will lose root if i flash the stock firmware through odin? is there another way to get my stock rom back without losing root (and cyanogenmod rom backups)?
hey guys im having trouble with triangle away on my sgh-t999v with the baseband version: T999VVLUFNF1
after I used triangle away and I go into download mode it says:
current binary: Samsung Official
System status: official
qualcomm secureboot:enable
Warranty Bit:1
Bootloader AP SWAEV: 2
Although the current binary and the system status have changed the warranty bit is still at 1
Please help!
There is no way (and never will be a way) to change the Warranty Bit. Sorry
DocHoliday77 said:
There is no way (and never will be a way) to change the Warranty Bit. Sorry
Click to expand...
Click to collapse
I guess im screwed for warranty..I thought it might be cuz I have a custom kernal installed that triangle away didnt work..but thanks anyway and sorry about posting in multiple threads, im kinda new to this
No problem, thats why i mention it, so you know for the future.
Tecnically, with the warranty bit tripped, the warranty is void. However, i have seen a lot of posts where people sent it in anyway and their warranty was still honored. Its not a guarantee, but there is hope it can be used if needed. The good thing though, is you most likely will never need to use it anyway!
Hi,
I just wanted to know that, is it possible to root G Note II GT-N7100 on stock ROM, without a PC, keeping flash counter at 0..??
I used to root my G Note & GS-II without PC, keeping flash counter at 0.
Un-rooting was also very easy and never needed PC to that as well.
So, is it possible to root G Note II GT-N7100 on stock ROM, without a PC, keeping flash counter at 0..??
Android Version: 4.1.2
Baseband Version: N7100DDDLK6
Build No.: JZO54K.N7100XXDMB2
P.S.- Please find attached screen shot of my phone's information. Just ROOT access is required, nothing else.
Thanks.
I don't know if it'll work with your firmware, but ExynosAbuse might work.... if not, then there's no way to do it without computer, though you can use TriangleAway to reset the flash counter as long as you have stock recovery... also to work around the "Modified" thing
No.
this is SPARTAAA
ExynosAbuse does not work on latest ROM, Jan 2013/LL7 and later.
iPTPenguin said:
I don't know if it'll work with your firmware, but ExynosAbuse might work.... if not, then there's no way to do it without computer, though you can use TriangleAway to reset the flash counter as long as you have stock recovery... also to work around the "Modified" thing
Click to expand...
Click to collapse
Thanks..
ExynosAbuse will not work as per dr.Ketan. he says ExynosAbuse does not work on latest ROM, Jan 2013/LL7 and later.
Still, I would like to find if someone has found the way to root note II without PC..!! :good:
I'm telling not possible.
this is SPARTAAA
I just want ROOT access on stock ROM.
UtkarshGupta said:
I'm telling not possible.
this is SPARTAAA
Click to expand...
Click to collapse
Okay.
Then, can you please tell me which method (easiest & safest) should I use for rooting G Note II GT-N7100 on stock ROM, keeping flash counter at 0..??
Android Version: 4.1.2
Baseband Version: N7100DDDLK6
Build No.: JZO54K.N7100XXDMB2
I am not very much familiar with rooting procedures. I just want ROOT access for modifying Games data and modifying some system & apps properties .
Thanks.
Cfautoroot. You can reset counter after using it
this is SPARTAAA
CF-Auto-Root, after using that, use TriangleAway
Sent from my GT-N7105 using xda premium
Un-rooting Necessary For Warranty & Service from Samsung.?
UtkarshGupta said:
Cfautoroot. You can reset counter after using it
this is SPARTAAA
Click to expand...
Click to collapse
iPTPenguin said:
CF-Auto-Root, after using that, use TriangleAway
Sent from my GT-N7105 using xda premium
Click to expand...
Click to collapse
Okay.
Thanks..
Will try that.
Also, please let me know, weather un-rooting of my phone is necessary for claiming warranty & service from Samsung India.?
Or just use of TriangleAway will be enough.??
it depends on Samsung repair center, but it is always safer to unroot, so there is less conflict whether rooting and SW modification was the cause of a problem with your phone.
Read in ketan's thread.
this is XXXDDDAAA
So I did this a couple times now first by accident, then on purpose. If you want to go back to 4.1.2 from 4.3 all you have to do is use Odin. Flash stock 4.1.2 onto 4.3 you get an error "unsupported firmware" then put your phone back into download mode (volume down+home button+power) next flash CF-auto root. After that you can boot into recovery (volume up+home+power) in recovery format everything factory reset, format cache. Last reboot your phone it should reboot into 4.1.2 I think that is how I did it if I remember all the steps right. Feel free to ask questions I don't always explain myself very well.
Sent from my SGH-T889 using xda app-developers app
So, has the 4.3 bootloader (which has KNOX) been downgraded to 4.1.2? And KNOX is removed?
What is the status of your device right now in Download Mode?
jk0l said:
So, has the 4.3 bootloader (which has KNOX) been downgraded to 4.1.2? And KNOX is removed?
What is the status of your device right now in Download Mode?
Click to expand...
Click to collapse
More importantly, if it has the non-Knox download mode (without the whole 0x1 tidbit), does reinstalling the OTA (which would have the Knox download mode) show 0x1 or 0x1 ??
Sent from my SGH-T889 using xda app-developers app
PhxDroid86 said:
More importantly, if it has the non-Knox download mode (without the whole 0x1 tidbit), does reinstalling the OTA (which would have the Knox download mode) show 0x1 or 0x1 ??
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
the million dollar question.
Well to be honest I think the answer to both questions is No. In download mode after I did the ota knox bull has been there. I actually only meant to use auto root on my 4.3 but knox kept on screwing up the root and su would fc. I figured if I started over and used auto root on 4.3 right after flashing rom with odin without letting phone boot and that worked I have 4.3 rooted with su and custom recovery (cwm). So no I didn't find a way to get rid of knox completely. Just a way to go back to 4.1.2 from 4.3.
Sent from my SGH-T889 using xda app-developers app
zephr5 said:
Well to be honest I think the answer to both questions is No. In download mode after I did the ota knox bull has been there. I actually only meant to use auto root on my 4.3 but knox kept on screwing up the root and su would fc. I figured if I started over and used auto root on 4.3 right after flashing rom with odin without letting phone boot and that worked I have 4.3 rooted with su and custom recovery (cwm). So no I didn't find a way to get rid of knox completely. Just a way to go back to 4.1.2 from 4.3.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
You need to update supersu when rooting on 4.3. Otherwise it will forceclose.
Sent from my SGH-T889
I'm still thinking that Knox will need to be patched/disabled during the root process (or something along those lines). Samsung claims the the fuse trigger is only capable of being triggered from 0x0 to 0x1 and not back again. So to me the answersolution probably will have to come with segregating Knox from the bootloader/system altogether. It'd be funny if devs could use Knox against itself by segregating it in the very "sandbox" it creates, if that makes sense
Sent from my SGH-T889 using xda app-developers app
Any 4.1.2 stock tar or was it a specific one? also is there only one version of CF auto root?
Help please!
Hello All.. After over 5 years of flashing I think I have finally bricked my device.. I am normally great with directions and the forum however I think the latest 4.3 update got me twisted up. Odin'd back to stock and upgraded OTA. All was well.. Then I attempted Chainfire's CF auto root.. All was well and I froze on a phone call.. I battery pulled and now I get "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again".. I tried to go through Kies emergency recovery and it wont accept my serial numbers.. I called t-mobile they told me I need to bring it to a smasung dealer to get "flashed"... I'm at a lost now.. One thing else is when I access download mode I see this Knox Warranty Void : 1.. Does this mean I'm done? I've been trying to read up on this knox and it seems scary to say the least.. yet nothing I read has helped me.. After hors of searching and missing the football game I decided to look to the forums.. Any help is very much appreciated. :crying:
I tried to ODIN back to stock with several .tar files (UVBMB4 and UVALJ1) it fails and shows unsupported version(in red) on the device:crying:
Device-T-Mobile Galaxy Note 2
cr1130 said:
Hello All.. After over 5 years of flashing I think I have finally bricked my device.. I am normally great with directions and the forum however I think the latest 4.3 update got me twisted up. Odin'd back to stock and upgraded OTA. All was well.. Then I attempted Chainfire's CF auto root.. All was well and I froze on a phone call.. I battery pulled and now I get "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again".. I tried to go through Kies emergency recovery and it wont accept my serial numbers.. I called t-mobile they told me I need to bring it to a smasung dealer to get "flashed"... I'm at a lost now.. One thing else is when I access download mode I see this Knox Warranty Void : 1.. Does this mean I'm done? I've been trying to read up on this knox and it seems scary to say the least.. yet nothing I read has helped me.. After hors of searching and missing the football game I decided to look to the forums.. Any help is very much appreciated. :crying:
I tried to ODIN back to stock with several .tar files (UVBMB4 and UVALJ1) it fails and shows unsupported version(in red) on the device:crying:
Device-T-Mobile Galaxy Note 2
Click to expand...
Click to collapse
Odin the official 4.3 update. That should fix you up
Sent from my SGH-T889 using xda app-developers app
kintwofan said:
Odin the official 4.3 update. That should fix you up
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Totally will kick myself if this works.. the only thing I didn't think of doing..smh.. thanks
EDIT: Proceeding to kick myself.. All is well now.. Thanks a bunch bro!!!
zephr5 said:
So I did this a couple times now first by accident, then on purpose. If you want to go back to 4.1.2 from 4.3 all you have to do is use Odin. Flash stock 4.1.2 onto 4.3 you get an error "unsupported firmware" then put your phone back into download mode (volume down+home button+power) next flash CF-auto root. After that you can boot into recovery (volume up+home+power) in recovery format everything factory reset, format cache. Last reboot your phone it should reboot into 4.1.2 I think that is how I did it if I remember all the steps right. Feel free to ask questions I don't always explain myself very well.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Sweet baby jesus! It worked. I thought I was going to stay on the eternal bootloop. Thank you again!
Where can I get the 4.1.1 download for tmobile?/
kintwofan said:
Odin the official 4.3 update. That should fix you up
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
I have been searching everywhere, but cant find the right download link for tmobile onlt at&t please help.
talk4less said:
I have been searching everywhere, but cant find the right download link for tmobile onlt at&t please help.
Click to expand...
Click to collapse
Sammobile.com is probably the best place
Sent from my SGH-T889 using xda app-developers app
downgrade from 4.3 back to 4.1.1
zephr5 said:
So I did this a couple times now first by accident, then on purpose. If you want to go back to 4.1.2 from 4.3 all you have to do is use Odin. Flash stock 4.1.2 onto 4.3 you get an error "unsupported firmware" then put your phone back into download mode (volume down+home button+power) next flash CF-auto root. After that you can boot into recovery (volume up+home+power) in recovery format everything factory reset, format cache. Last reboot your phone it should reboot into 4.1.2 I think that is how I did it if I remember all the steps right. Feel free to ask questions I don't always explain myself very well.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
sir, i'm new to this forum and here's my situation:
i have a sgh-t889 t-mobile locked, stock 4.1.2 (UVBMB4) which i erroneously updated to android 4.3 via kies.
i cannot do network unlock because based on my forum searches, only android 4.1.1 can be network unlocked via the method outlined here:
http://forum.xda-developers.com/showthread.php?t=2176721
i have odin 3.07 and have already downloaded the following roms:
1. T889UVUCMK7_T889TMBCMK7_T889UVUCMK7_HOME.tar.md5
1.68 GB (1,814,261,839 bytes) (1,771,742 KB)
2. KIES_HOME_T889UVALJ1_T889TMBALJ1_260018_REV04_user_low_ship.tar.md5
1.25 GB (1,345,341,538 bytes) (1313811 KB)
can i reflash my sgh-t889 to 4.1.1 safely and do my own unlock?
thanks for any clarification and more power.
If you can flash back to 4.1.2 from 4.3 then you can flash back to 4.1.1 from 4.1.2. That's how I unlocked my phone.
Sent from my SGH-T889 using Tapatalk 2
I flashed to 4.1.1 directly and this worked. I had flashed ota 4.3 rooted the phone, then jedi X 4.3 rom and it messed up my phone bad. Would lose data all the time and massive battery drain. Now I'm back on 4.3 stock rooted.
Sent from my SGH-T889 using xda app-developers app
android 4.3 to 4.1.2 to 4.1.1 re-flash failure
sabresfan said:
If you can flash back to 4.1.2 from 4.3 then you can flash back to 4.1.1 from 4.1.2. That's how I unlocked my phone.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
thanks for the suggestion but the 'com' portion of odin 3.07 would not lit up and the following ROMs could not be flashed:
4.1.2 = SGH-T889_TMB_T889UVBMB4-teshxx.tar.md5
4.1.1 = KIES_HOME_T889UVALJ1_T889TMBALJ1_260018_REV04_user_low_ship.tar.md5
the 'com' portion of odin would only lit up if the sgh-t889 is connected to the pc under usb mode. it would not lit up under download mode.
i have this other 4.1.1 ROM which i did not test yet as of this moment as i'm waiting for more information:
4.1.1 = root66_root66_TMO_T889UVALJ1.tar.md5TMO_T889UVALJ1
from kies update, i have also saved my new updated ROM:
4.3 = T889UVUCMK7_T889TMBCMK7_T889UVUCMK7_HOME.tar.md5
---------- Post added at 10:21 PM ---------- Previous post was at 10:04 PM ----------
ProfeKarma said:
I flashed to 4.1.1 directly and this worked. I had flashed ota 4.3 rooted the phone, then jedi X 4.3 rom and it messed up my phone bad. Would lose data all the time and massive battery drain. Now I'm back on 4.3 stock rooted.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
just for clarification, you were on stock 4.1.2, updated OTA to 4.3, then re-flashed successfully to 4.1.1 via odin, then flashed OTA 4.3?
4.1.2 to 4.3 via kies to 4.1.1 via odin to 4.3 via kies
re-reading this thread: http://forum.xda-developers.com/showthread.php?t=2176721
afterwards, i decided to use odin 3.07 again but this time, i used another usb cable.
i used this ROM = KIES_HOME_T889UVALJ1_T889TMBALJ1_260018_REV04_user_low_ship.tar.md5
re-flashing to lower version via odin 3.07 was successful.
i did the unlocking trick as outlined in this thread: http://forum.xda-developers.com/showthread.php?t=2176721
under android 4.1.1 settings, MODIFIED.
software update thru OTA was denied due to software modification.
successfully re-flashed to android 4.3 via odin 3.07 using this ROM = T889UVUCMK7_T889TMBCMK7_T889UVUCMK7_HOME.tar.md5
knox counter was tripped.
afaik, wifi is okay, able to browse my wifi network
i have not yet tested a non-tmo sim.
tiningalan said:
i have not yet tested a non-tmo sim.[/SIZE]
Click to expand...
Click to collapse
Since you already tripped the knox counter, you can flash the VALL4 tmobile modem and try the same unlock steps in the thread.
The specific modem was all that was required to unlock the t889. I unlocked on 4.1.2 only flashing the older modem and following the unlock steps.
I'm planning on upgrading to another phone so I'm trying to get this counter on my phone reset to 0, then unrooting.
Right now I am on the latest version of Insanity ROM Android 4.3 MK2 Baseband .
I tried resetting the counter using TriangleAway earlier, but I noticed I needed to be on a stock Samsung kernel.
So I found one (and this same thing happened when I tried to flash a stock rooted ROM with MDL) on XDA directly for the T-Mobile S4, only to find out that after flashing, it wouldn't get past the black screen after the SGS4 logo comes on.
Luckily, I restored back
I know how to unroot and everything I just want to ask before I do this,. Can I go ahead on using Triangle Away on my current rom? And then do the unrooting process?
If you took the OTA 4.3 you are Sol. If you still have the MDL bootloader you can Odin the MDL stock image then root and triangle away and then unroot. You will be good to go then.
Sent from my SGH-M919 using xda app-developers app
mrzhadow said:
If you took the OTA 4.3 you are Sol. If you still have the MDL bootloader you can Odin the MDL stock image then root and triangle away and then unroot. You will be good to go then.
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
No, I never had it updated when I bought it from Tmo as Android 4.2.2 . So you're saying with even with the current custom 4.3 Android & custom kernel that I have right now I can Odin the MDL? (Unroot, Root, TriangleAway, unroot?)
arthurgreeeen said:
No, I never had it updated when I bought it from Tmo as Android 4.2.2 . So you're saying with even with the current custom 4.3 Android & custom kernel that I have right now I can Odin the MDL? (Unroot, Root, TriangleAway, unroot?)
Click to expand...
Click to collapse
Yes. If you never took the OTA and only flashed the mk2 modem you can absolutely Odin the stock MDL ROM and root, triangle away then unroot (in that order) You'll be good to go then. Just make sure you're binary found is at 0 by booting into download mode when you're done.
Sent from my SGH-M919 using xda app-developers app
---------- Post added at 11:10 PM ---------- Previous post was at 11:08 PM ----------
mrzhadow said:
Yes. If you never took the OTA and only flashed the mk2 modem you can absolutely Odin the stock MDL ROM and root, triangle away then unroot (in that order) You'll be good to go then. Just make sure you're binary count is at 0 by booting into download mode when you're done.
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Sent from my SGH-M919 using xda app-developers app
I'm having the same problem when I got my s4 I didn't know anything about Knox or all the other headaches that come with rooting this phone!! But me being me as soon as I opened the phone I updated it to 4.3 then rooted it not knowing I wouldnt be able to return to stock! Even tho I did backup my stock rooted phone my phone will not let me restore to it so I've been stuck on beanstalk 4.4 but really want to go back to stock rooted cause of the camera!! Haha.... I'm new to the s4 so I'm still learning more about it I had an s2 before this and that was all cake walk flashing and what not. I just want to know if Odin is an option for me to return to stock or not?? I think I backed it up through lies before ota 4.3
I'm having the same problem when I got my s4 I didn't know anything about Knox or all the other headaches that come with rooting this phone!! But me being me as soon as I opened the phone I updated it to 4.3 then rooted it not knowing I wouldnt be able to return to stock! Even tho I did backup my stock rooted phone my phone will not let me restore to it so I've been stuck on beanstalk 4.4 but really want to go back to stock rooted cause of the camera!! Haha.... I'm new to the s4 so I'm still learning more about it I had an s2 before this and that was all cake walk flashing and what not. I just want to know if Odin is an option for me to return to stock or not?? I think I backed it up through lies before ota 4.3
Click to expand...
Click to collapse
From what I've read in other threads you cannot downgrade bootloaders so if you took th OTA you can't go back to 4.2. From what I understand it will brick your phone. If you are already 4.3 and rooted you have already voided your warranty. You may as well Odin the stock 4.3 and root again so you can flash other Roms since you are stuck on 4.4.
Sent from my SGH-M919 using xda app-developers app
I am having trouble with my phone with the capacitive button and no one sem to have any ideas...so my last resort will be to update to the 4.4.2 and see if that will fix it.
What's the cleaning way to update? OTA from 4.3 or should I flash official ROM with odin? OTA only has 500 MB...so I assume some stuff is not updated? When flashing from odin, does it have to be rooted? USB debug on? and which version of odin should I use? Rooting we used 3.09 and put in AP box...but other just unrooting video shows people using 1.85 and instead of AP, the file is put into PDA?
Thanks...or if someone know how to fix the capacitive button problem..I would greatly appreciate it.
newr said:
I am having trouble with my phone with the capacitive button and no one sem to have any ideas...so my last resort will be to update to the 4.4.2 and see if that will fix it.
What's the cleaning way to update? OTA from 4.3 or should I flash official ROM with odin? OTA only has 500 MB...so I assume some stuff is not updated? When flashing from odin, does it have to be rooted? USB debug on? and which version of odin should I use? Rooting we used 3.09 and put in AP box...but other just unrooting video shows people using 1.85 and instead of AP, the file is put into PDA?
Thanks...or if someone know how to fix the capacitive button problem..I would greatly appreciate it.
Click to expand...
Click to collapse
I don't know about the capacitive buttons. As for root, do you care about knox?
If yes, then best way (and only clean way I know of) is to root 4.3 with any knox safe method, and use the Mobile Odin method mentioned in another thread (http://forum.xda-developers.com/showpost.php?p=51627463&postcount=67).
If you dont care about knox then you can do anything, i.e. follow the above steps or OTA to 4.4 and use Chainfire's auto root method.
I need everything to stay intact... I already rooted, just want to make it back to stock for warranty. N want to see if updating firmware might fix pb
Sent from my Galaxy Nexus using XDA Free mobile app
newr said:
I need everything to stay intact... I already rooted, just want to make it back to stock for warranty. N want to see if updating firmware might fix pb
Sent from my Galaxy Nexus using XDA Free mobile app
Click to expand...
Click to collapse
Follow the instructions in the link I gave. I followed it and it worked awesome. It'll keep knox intact for warranty purposes and give you rooted kitkat (stock).