Related
Hello
I'm new here so they wouldn't allow me to post on the Dev section, anyways, I bought my Xperia S with Android GB in it and it has been with me for a while so i keep updating it. I installed the last software Sony has (JB .96) before i started flashing custom ROMs, however, i noticed that the WiFI stopped working in all the JB versions (.200, .211, .96) and when i did some research i found that Sony has activated its restriction program on some countries these are Sudan, Iran and Syria, as far as i know. me, i'm from Sudan, i figured that the the device shuts down the wifi ONLY when it detects the SIM card, as when i try to remove the SIM of turn on AirPlane mode (then restart the Device to start on AirPlane mode) the wifi works just fine.
when the wifi is locked, i can still turn it on, but the device starts to get very slow and it keeps searching for networks forever, and when i turn it of it take a loooong time to do so. installing custom ROMs did not fix this problem as most of the ROMs are based on the JB builds. i tried other solutions like trying to change the country code and so, but still, no luck. i might have tried lots of things here but frankly i'm not a developer, but i succeed to flash ROMs and Kernels by following your instruction, which u do very well on it .
I though that you guys did not encounter this issue before because you are not is a in a country that is under "US sanction" , but i'm sure you would have fixed this problem if you have heard of it
sorry for the loooong post hehe.
just one last thing, I LOOOOOVE what you guys are doing and i really do appreciate it, i WANT to donate but, there we (guys from Sudan)
can't create a PayPal account or so, again "US sanction".
oooooooooooookay i guess i'm not welcomed here
BMBcin said:
oooooooooooookay i guess i'm not welcomed here
Click to expand...
Click to collapse
Can,t u just flash for example PureSlim KitKat rom? Im using it now, it's working 100% fine and much faster than JB or any modded JB. Im 100% there will not be any wifi restrictions here.
UlvarinPL said:
Can,t u just flash for example PureSlim KitKat rom? Im using it now, it's working 100% fine and much faster than JB or any modded JB. Im 100% there will not be any wifi restrictions here.
Click to expand...
Click to collapse
hey body, thx for replying, i tried every possible rom u could think of, im now using OpenSEMC-U-R2c, i've been searching of a solution forever.
Where are u now? r u in Sudan? using Sudanese network operator?
same problem here
Hi There
I'm from Sudan too and I'm facing the same problem as @BMBcin I've tried Zillions of ROM's to solve the problem (I don't know about the restriction thing but putting the phone in flight mode didn't help either , my friend have Xperia Z and WiFi is working fine for him ) if someone come up with a solution please post it here
my phone is xperia ion, I have this problem and solve that
refer this link http://forum.xda-developers.com/showthread.php?p=52532781
Solved
Thank you @feri_sh problem solved
feri_sh said:
my phone is xperia ion, I have this problem and solve that
refer this link http://forum.xda-developers.com/showthread.php?p=52532781
Click to expand...
Click to collapse
[Q&A] [ROM][29-10] SD v 20|3.28.401.7| ANDROID 4.4.4| SD Kernel| SDHub| HK| Xtended
Q&A for [ROM][29-10] SD v 20|3.28.401.7| ANDROID 4.4.4| SD Kernel| SDHub| HK| Xtended & More
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][29-10] SD v 20|3.28.401.7| ANDROID 4.4.4| SD Kernel| SDHub| HK| Xtended & More. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Little Problem
Had a little problem during the installation on Recovery PhilzTouch 6.57.8.
I think is an Aroma graphical incompatibility, no big problems.
It was like the background of the installer was trasparent so during the configuration in Aroma i was able to see the "console command" on CWM.
ZumerSandro said:
Had a little problem during the installation on Recovery PhilzTouch 6.57.8.
I think is an Aroma graphical incompatibility, no big problems.
It was like the background of the installer was trasparent so during the configuration in Aroma i was able to see the "console command" on CWM.
Click to expand...
Click to collapse
Hi Zumer, im using Philz 6.26.6, that one works well with this rom. Try it
Hi seeing as I have been pointed here I'll repeat the question. I cannot get the wake actions to change from default. I can change them and it says that I am using said function but the action still produces the default function. I am s-off and unlocked on an international version. Have no troubles with this on other roms but prefer to use SD. any ideas or help much appreciated.
cometabro said:
Hi seeing as I have been pointed here I'll repeat the question. I cannot get the wake actions to change from default. I can change them and it says that I am using said function but the action still produces the default function. I am s-off and unlocked on an international version. Have no troubles with this on other roms but prefer to use SD. any ideas or help much appreciated.
Click to expand...
Click to collapse
Using root explorer, go to system /etc/int.d folder, cut and paste in ur sd card, as backup, 99skydragon file, then reboot and try.
Cheers for the reply. So I get to the point of cut and paste and it tells me system is read only. How do I change this. Obviously I'm not too clued up but can follow directions. Thanks
cometabro said:
Cheers for the reply. So I get to the point of cut and paste and it tells me system is read only. How do I change this. Obviously I'm not too clued up but can follow directions. Thanks
Click to expand...
Click to collapse
Look, when u are trying to cut an alert will prompt about permissions and rights, say YES, then cut. Try this time with the 40StW file
So this is what I'm getting. And in the top left of root explorer it says mounted as r/o
cometabro said:
So this is what I'm getting. And in the top left of root explorer it says mounted as r/o
Click to expand...
Click to collapse
Press tab where says R O to R W. I did delete mine without a problem
Cheers for trying to help. Still no luck.maybe I'm blind or just not having a good day.
I haven´t been able to use HTC backup and restore tool after I flash SD v 20 rom.
When installed Rom was not able to restore and now I have FC when try to open the app.
geragar said:
I haven´t been able to use HTC backup and restore tool after I flash SD v 20 rom.
When installed Rom was not able to restore and now I have FC when try to open the app.
Click to expand...
Click to collapse
Will check tomorrow, comparing it with v 19.
If did work on v 19 should work on this one
dragonesdenano said:
Will check tomorrow, comparing it with v 19.
If did work on v 19 should work on this one
Click to expand...
Click to collapse
Sorry, it was my fault. I chose not to install My HTC and that caused the FC. Flash again the ROM and now everything is working great.
Thanks for you work.
geragar said:
Sorry, it was my fault. I chose not to install My HTC and that caused the FC. Flash again the ROM and now everything is working great.
Thanks for you work.
Click to expand...
Click to collapse
Thats great!
Really I never use that feature, what always leave it in the rom cause a lot of user use it!
Firmware
Is it useful to flash the newest firmware 3.28.401.9 (the thingy that includes modem files etc.) before flashing v22? I´m currently on v20 with firmware 3.28.401.6. v20 needed the new firmware, otherwise wifi won´t work, but v22 still running with the old one.. Is it recommended to flash it anyway? Unfortunately it´s a very time-consuming process to do the firmware upgrade..
striker_lt said:
Is it useful to flash the newest firmware 3.28.401.9 (the thingy that includes modem files etc.) before flashing v22? I´m currently on v20 with firmware 3.28.401.6. v20 needed the new firmware, otherwise wifi won´t work, but v22 still running with the old one.. Is it recommended to flash it anyway? Unfortunately it´s a very time-consuming process to do the firmware upgrade..
Click to expand...
Click to collapse
Only if you are facing lots of problems. Im actually on Latest dev edition firmware, not even International, all ok. So i wont update firmware yet
Thanks for the quick reply.
I´ve no problems at all. Battery is great and 3g/LTE recception too. So i´ll wait with firmware update until "L" arrives
Only Problem I noticed is, that I can´t get the Doubletap2Wake / Sweep2Wake funktion work in ExtremeEnergySaving Mode... It vibrates on doubletap/sweep but no wake... :/ Not sure if it´s the rom or my mistake. I´ve enabled the feature in sense mod but it´s only working on ExtendedBatterySaving disabled!
You´re doing great work, Sir!
striker_lt said:
Thanks for the quick reply.
I´ve no problems at all. Battery is great and 3g/LTE recception too. So i´ll wait with firmware update until "L" arrives
Only Problem I noticed is, that I can´t get the Doubletap2Wake / Sweep2Wake funktion work in ExtremeEnergySaving Mode... It vibrates on doubletap/sweep but no wake... :/ Not sure if it´s the rom or my mistake. I´ve enabled the feature in sense mod but it´s only working on ExtendedBatterySaving disabled!
You´re doing great work, Sir!
Click to expand...
Click to collapse
Wake options can be our kernel. Rite now HolyAngel is on Gpe Android L, working on that. Soon will fix it. Meanwhile, i will prepare a new version with an old version of SD kernel till get a new one
Htc One m8 no wifi after intalling custom rom
Guys ive just flashed the latest Skydragon rom to my htc one m8 and now the wifi can't be switched on
Ive updated my firmware to fw_2.22.401.5_no_red_text
The phone is rooted and s-off
Can anyone please advise
Fixed it was the firmware being to old, updated and now im sorted
vwcrod said:
Guys ive just flashed the latest Skydragon rom to my htc one m8 and now the wifi can't be switched on
Ive updated my firmware to fw_2.22.401.5_no_red_text
The phone is rooted and s-off
Can anyone please advise
Fixed it was the firmware being to old, updated and now im sorted
Click to expand...
Click to collapse
Must try firmware 3.xx.xxx.xx
As Rom has Android 4.4.4 same as new firmware
[Q&A] [Definitive][Rom][N910VVRU1ANJ5][4.4.4] Root Deodex/Knox-Free/Debloated/Fast/F
Q&A for [Definitive][Rom][N910VVRU1ANJ5][4.4.4] Root Deodex/Knox-Free/Debloated/Fast/Fluid
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Definitive][Rom][N910VVRU1ANJ5][4.4.4] Root Deodex/Knox-Free/Debloated/Fast/Fluid. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
EMSpilot said:
For those of you running Gear VR Oculus.
You must Odin the stock tar first: Link to Stock Tar "URL"
Then Odin TWRP Link here: "URL" and then flash the Gear VR Definitive Rom Package: "URL" Link Gear VR Definitve Rom NJ5 V1.0
You will not have CD Installer mod or ASEC. As these mods stop Gear VR from working!!
Click to expand...
Click to collapse
Your link for Gear VR Definitve Rom NJ5 V1.0 seems to be broken.
I had to remove the working links in my reply due to low post count.
It seems that to try to get this running is kinda hard with the VR.
Sent from my SM-N910V using Tapatalk
Are there any updates on the retail verizon note 4 root?
I was excited when I found the stock odin thread because I have the N910V NJ5 but then I realized they were just flashing my stock Rom on to the DE. This is the first android phone I have had in a long time and I got it because I wanted to root it. But apparently I didn't do enough research it was a last minute decision to grab the note instead of the iPhone 6+ I had in my hand.
Gear VR on 1.6?
I just read through this whole thread. Great stuff!
I either missed it or there isn't any confirmation yet that Gear VR works on v1.6. Can anyone report their findings on this?
This link on the OP looks like it's only relevant for V1.0, but I'm not certain: Link Gear VR Definitve Rom NJ5 V1.0-Still Testing-Not available yet!!!!
language
This rom have french language? ???
I'm having issues writing to my external SD card with version 1.6 of this rom. I can write files to the SD card without a problem, but once I reboot all new files are gone with only the new folders remaining. Any ideas?
JoshDi said:
I'm having issues writing to my external SD card with version 1.6 of this rom. I can write files to the SD card without a problem, but once I reboot all new files are gone with only the new folders remaining. Any ideas?
Click to expand...
Click to collapse
Through help in another thread, this was occuring because of a bad sd card. My old 64gb card works without issue.
Factory Reset
Has anyone having issue with the Factory Reset with this ROM? When I rest the phone, instead of taking to the window to erase all data, it takes me to the wi-fi settting. Thanks.
HadesNZeus said:
Has anyone having issue with the Factory Reset with this ROM? When I rest the phone, instead of taking to the window to erase all data, it takes me to the wi-fi settting. Thanks.
Click to expand...
Click to collapse
Try doing a factory reset through TWRP recovery or by reflashing the ROM zip file.
My baseband is 910VVRU1ANJ5... Is it a DE phone? Or is it so obvious that I would know if I had a DE phone? Thanks!
Did you buy it straight from Samsung, did you pay full price, did it say Developers Device on the box, under the battery and when you boot into download mode does it say "unlocked"? If not then ...no.
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / Custom Kernel-ed / TWRP 2.8.4.0.trltevzw
None of the above... Thanks for the prompt answer. I think this is my 12th Android phone and it didn't dawn on me that I wouldn't be able to at least root!
I just came over from FireKat ROM because I wanted to my Note with a Gear VR and noticed the status bar on the home screens is black. Tried some Xposed Modules to get rid of it and have a transparent status bar like I did with FireKat but I'm unable to fix the situation. Any ideas or is the status bar just always black with Definitive?
im running 1.6, do i need to do a complete wipe before upgrading to 1.9? or can i just do a cache/davlik wipe?
Sorry for the n00b question guys, but I just got my DE Note 4 today. I flashed the TWRP recovery and rooted, but I am having my doubts on flashing this ROM because I have a different baseband than the one in the title (N910VOYU1ANJ5). My question is, will I pork my new toy by flashing this, or will I be fine. I tried googling and couldn't find a definite answer either way. Thanks in advance.
root！！！！！！
I just want to know if Note4 with non dev edition can be root？？？？
52yt said:
I just want to know if Note4 with non dev edition can be root？？？？
Click to expand...
Click to collapse
Not yet....
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / Custom Kernel-ed/ TWRP 2.8.5.0.trltevzw
elcanela said:
Sorry for the n00b question guys, but I just got my DE Note 4 today. I flashed the TWRP recovery and rooted, but I am having my doubts on flashing this ROM because I have a different baseband than the one in the title (N910VOYU1ANJ5). My question is, will I pork my new toy by flashing this, or will I be fine. I tried googling and couldn't find a definite answer either way. Thanks in advance.
Click to expand...
Click to collapse
Read the OP thoroughly.
Sent from my SM-N910V DE
Remember: Read twice - Flash once
Just confirming...
Sorry I'm still relatively new to Andriod and never rooted or messed around on the filesystem of my Note 4 before. But after going through the apps (and permissions they have) after my phone was explioted from a hardcore BIOS rootkit I got on my computer, and the hacker that followed. It is absolutly crazy the stuff that comes stock on these phones, makes me kind of sick. Needs cleaned, I don't even like carrying it and I'm using a No Root Firewall, which makes me even sicker when I look at the log of blocked access to all this junk. Done ranting.
Seems to be relatively straight forward as far as a Linux-esk filesystem layout. Just confirming this will still work fine on a ANJ5 build, not ever turning the phone back in to verizon so that doesn't matter.
Another random question, anyone point me in the correct direction for possibly running from an SD card or dual booting this model note 4 with a linux OS. Could be a live instance or persistant, doesn't much matter to me. Rather have something like Debian or Kahli. Would be nice to be able to pen test from my phone.
Apologize if this is the wrong spot for this.
Hello community.
For about 3 weeks now the GPS of my Note 2 isn't working anymore. Here's a bit of the story :
I was on latest Marshmallow RR rom (5.7.4) with working GPS and everything, when at one moment the phone crashed. I made a force reboot (holding power button) and when restarting, for no apparent reason, my phone was sim-locked on my previous carrier.
I've contacted the carrier to get a sim-unlock code, but it wasn't accepted. I had to flash an original firmware to unlock by code, then re-flash a custom rom.
I've decided to switch to Nougat RR (5.8.x), everything was working fine, at least that what I thought. When about 1 week and half later I needed to use the GPS, it didn't manage to get a gps fix, and could locate only by the wifi or gsm networks. No very usefull for car navigation ...
Since then, I tried flashing many things to get it work :
- flashing aicp boot.img to fix GPS on RR rom : didn't work
- flashing AICP (12.1) full rom : didn't work
- flashing an original firmware ( tried N7100XXUFND3_N7100OXAFND3_XEF, N7100XXUFPF1_N7100FTMFPE2_FTM and N7100XXUFNI2_N7100BOGFNI1_BOG ) : didn't work
- applying GPS Fixer zip (https://forum.xda-developers.com/showthread.php?t=2455885) to AICP : didn't work
I'm currently running on AICP with FPE2 firmware, and GPS don't fix.
I have no more ideas on what I should do to make the thing work, please help me :crying:
I'm back ...
For the ones who read my post, sorry for wasting your time ... it seams that the GPS was working ...
I gave some tries yesterday and it got a position. Seams like I didn't test in correct areas and it couldn't receive any signal ...
Well, now everything is good
Is it possible to remove this, kind of, useless thread now ?
ReMix3D said:
Is it possible to remove this, kind of, useless thread now ?
Click to expand...
Click to collapse
For the future, use the report button (the triangle one)
ReMix3D said:
Is it possible to remove this, kind of, useless thread now ?
Click to expand...
Click to collapse
Thread closed.
Razvan
Forum Moderator
Hi All,
I have a LG G710EMW, and I want to get android 10 on it. I live in UK so I flashed EU open rom onto this phone. Now everything appears to work fine, dual sim is working OK, I can call etc, but I get this error every time on startup.
I have read other threads - but they say they get no network, however my phone seems fine. Can I leave this rom or should I wait until brazil/hong hong/aus get android 10 and then flash? Also any idea when that will happen or it's already happened? Can you share the KDZ?
rash.m2k said:
Hi All,
I have a LG G710EMW, and I want to get android 10 on it. I live in UK so I flashed EU open rom onto this phone. Now everything appears to work fine, dual sim is working OK, I can call etc, but I get this error every time on startup.
I have read other threads - but they say they get no network, however my phone seems fine. Can I leave this rom or should I wait until brazil/hong hong/aus get android 10 and then flash? Also any idea when that will happen or it's already happened? Can you share the KDZ?
Click to expand...
Click to collapse
Same here... I've flashed ITA android 10 kdz and at the startup i've got the same popup
I've flash back android 9 and I no longer have this problem.
hoping that someone knows a little more...
(my phone isn't dual sim)
gius0161 said:
Same here... I've flashed ITA android 10 kdz and at the startup i've got the same popup
I've flash back android 9 and I no longer have this problem.
hoping that someone knows a little more...
(my phone isn't dual sim)
Click to expand...
Click to collapse
Most of us who cross flash get that error. Volte also does not work. Rest all works perfectly even after that error, so i just ignore it.
lefttobleed said:
Most of us who cross flash get that error. Volte also does not work. Rest all works perfectly even after that error, so i just ignore it.
Click to expand...
Click to collapse
is there any method to remove the warning even with root?
gius0161 said:
is there any method to remove the warning even with root?
Click to expand...
Click to collapse
If you google and see there are some methods for other phones. I did not bother to try, so don't know if it will work with our phones.
lefttobleed said:
Most of us who cross flash get that error. Volte also does not work. Rest all works perfectly even after that error, so i just ignore it.
Click to expand...
Click to collapse
Why does VOLTE not work? Any way to fix it?
gius0161 said:
is there any method to remove the warning even with root?
Click to expand...
Click to collapse
Yes possible to fix: https://forum.xda-developers.com/lg-g5/how-to/cust-error-solution-t3507311
rash.m2k said:
Why does VOLTE not work? Any way to fix it?
Yes possible to fix: https://forum.xda-developers.com/lg-g5/how-to/cust-error-solution-t3507311
Click to expand...
Click to collapse
I tried the volte solution in guides section and also voenabler magisk module. They did not work for me. I have EMW.
I have shifted to lineages, so am not looking at the development in those threads anymore. Voenabler in lineage os only changed my LTE to LTE+.
Voenabler did work for someone in that thread maybe you can go to that thread and discuss or try on your phone.
lefttobleed said:
I tried the volte solution in guides section and also voenabler magisk module. They did not work for me. I have EMW.
I have shifted to lineages, so am not looking at the development in those threads anymore. Voenabler in lineage os only changed my LTE to LTE+.
Voenabler did work for someone in that thread maybe you can go to that thread and discuss or try on your phone.
Click to expand...
Click to collapse
How is lineage os? Is it stable as a everyday OS? Any issues? Rather have stock android
rash.m2k said:
How is lineage os? Is it stable as a everyday OS? Any issues? Rather have stock android
Click to expand...
Click to collapse
I use the one by Josh.
For me it is stable. I don't use bluetooth, wireless charging, etc. so cannot comment on that.
I find this to be the best ROM out there for now. It has good battery and performance.
Basically you should be ready to experiment and see if you like it. If you want a fully stable phone, and no TIME to experiment, then I would advice you to stick to stock.
rash.m2k said:
Why does VOLTE not work? Any way to fix it?
Yes possible to fix: https://forum.xda-developers.com/lg-g5/how-to/cust-error-solution-t3507311
Click to expand...
Click to collapse
I had already read this guide, but I gave up as the code did not open any menus. Doing some research I found that the code varies by model (ends with 710#). However, unfortunately it does not work. I cannot modify the NT Code and with the 20b base firmware it returns NTCODE WRITE ERROR after edit it.