Develop Bugs

[Q] Clockworkmod xperia play

I have serached and searched. was unable to find anything so im rly sorry if i dubble post.
But will clockworkmod from Rom manager V4.5.0.1 Work on xperia play R800I
and
If im trying to flash it trough Rom manager can it cause any harm if it is not working.
i would like to avoid to flash yet another rom with Fastboot yet again if i can use a more easy on the go alternative.
Thanks in advanced.

No cwm is only supported by using dooms kernal. Wish itvwas that easy

nyvang101 said:
I have serached and searched. was unable to find anything so im rly sorry if i dubble post.
But will clockworkmod from Rom manager V4.5.0.1 Work on xperia play R800I
and
If im trying to flash it trough Rom manager can it cause any harm if it is not working.
i would like to avoid to flash yet another rom with Fastboot yet again if i can use a more easy on the go alternative.
Thanks in advanced.
Click to expand...
Click to collapse
You have two options either flash dooms kernel which comes with recovery or boot free xperia recovery (which require unlocked bootloader) both threads u can find under xperia play android development section ,pls. do some search
Sent from my R800i using xda premium

Flashtool
It would be awesome if it were that easy man, but unfortunately Flashtool is the best alternative unless your really patient

flashtool...... ?

I have a stock build on a rooted xperia play with unlocked bootloader ofc... im not too comfortable with the process of flashing new roms. i have no idear how to flash the kernal in ordre to flash cyanogenmod 7. any help doing so would be apriciated alot. thats why i asked if there where an alternative.
will something like Xcharger Reboot option be any helpfull ?

CyanogenMod 7.1 Official also includes CWM.
Installation guide:
http://wiki.cyanogenmod.com/wiki/Sony_Ericsson_Xperia_Play:_Full_Update_Guide

I like the openness of cyanogen but i like having all my playstation stuff sooo.. would it be possible to flash cwm when doing the cyanogenmod flash and then use flashtool to install stock 2.3.3 so i can backup and choose whichever one i want in the future?

thanks alot just what ive been looking for. but i have a question
i installed another stock rom on the phone version 2.3.3
Basebandversion 7x30A-AAABQMAZM-1290_21-22
and Kernalsystem 2.6.32.9-perf [email protected]#1
Will i have to install another kernal or can i just go haead and flash ?

Flashtool?

nyvang101 said:
thanks alot just what ive been looking for. but i have a question
i installed another stock rom on the phone version 2.3.3
Basebandversion 7x30A-AAABQMAZM-1290_21-22
and Kernalsystem 2.6.32.9-perf [email protected]#1
Will i have to install another kernal or can i just go haead and flash ?
Click to expand...
Click to collapse
For flashing CM you have to flash the CM kernel (boot.img) that comes in the zip package of CM , u hav to unzip the latest CM FXP package and flash boot.img through fastboot put the file boot.img in the same folder in your pc where fastboot is located and copy the CM Rom zip file on the root of your sdcard. Now connect ur phone in fastboot mode (turnoff & hold the search key while connecting to pc) check if ur phone is connected properly by entering the following command in command prompt
fastboot getvar version
if it return some value like 0.3 then ur connected correctly. Now for flashing the CM Kernel enter following command
fastboot flash boot boot.img
If all is done correctly a message will appear in command prompt stating success.Now turn on the phone while the phone is booting up press the volume rocker repeatedly until the phone enters CWM recovery mode , now install the CM Rom from ur sdcard remember to perform a nandroid backup and wipe the data/cache before installing.
Sent from my R800i using xda premium

Florenjp1 said:
Flashtool?
Click to expand...
Click to collapse
What a bright awnser but not rly usefull. toobad they did not add a Ignore button on the forum

Thank you so much... you are the best !!!!

arpit85 said:
For flashing CM you have to flash the CM kernel (boot.img) that comes in the zip package of CM , u hav to unzip the latest CM FXP package and flash boot.img through fastboot put the file boot.img in the same folder in your pc where fastboot is located and copy the CM Rom zip file on the root of your sdcard. Now connect ur phone in fastboot mode (turnoff & hold the search key while connecting to pc) check if ur phone is connected properly by entering the following command in command prompt
fastboot getvar version
if it return some value like 0.3 then ur connected correctly. Now for flashing the CM Kernel enter following command
fastboot flash boot boot.img
If all is done correctly a message will appear in command prompt stating success.Now turn on the phone while the phone is booting up press the volume rocker repeatedly until the phone enters CWM recovery mode , now install the CM Rom from ur sdcard remember to perform a nandroid backup and wipe the data/cache before installing.
Sent from my R800i using xda premium
Click to expand...
Click to collapse
Thanks alot its really helpfull. altho i cant find a Cyanogen relaser for the play anywhere on cyanogen official website will this one do ? http://forum.xda-developers.com/showthread.php?p=14815864#post14815864

nyvang101 said:
Thanks alot its really helpfull. altho i cant find a Cyanogen relaser for the play anywhere on cyanogen official website will this one do ? http://forum.xda-developers.com/showthread.php?p=14815864#post14815864
Click to expand...
Click to collapse
Yes this is correct CM package for play
Sent from my R800i using xda premium

i flashed the Cyanogenmod just to discover that i have no radio. then i downloaded the official rom. now how do i flash the official one ? is that same metod ? because its some wierd filetype *.ftf

nyvang101 said:
i flashed the Cyanogenmod just to discover that i have no radio. then i downloaded the official rom. now how do i flash the official one ? is that same metod ? because its some wierd filetype *.ftf
Click to expand...
Click to collapse
First restore ur phone to the official
firmware through nandroid restore (u had that backup right ?) then U have to use flashtool for flashing that official Rom, search for flashtool 2.9.1 beta (only this version is compatible with play not use version 3.0) u will find that in xda forums download the file and unpack on the desktop a folder flashtool will be created inside that folder look for subfolder named drivers there will be an executable file ggsetup.exe run that file to install the drivers necessary ,after that copy the firmware .ftf file in the subfolder named firmwares. Now switch off your phone but not connect to pc yet. Run flashtool.exe in that application you will find flash button click on it and then select the firmware u have downloaded to flash , now u will see several files such as adsp.sin etc show up on the right side of flashtool you have to select all those files by ctrl+a or click seperately to select all of them after you are done with it make sure you have clicked wipe data on the upper right side and then click flash now the flashtool screen will show this message - preparing files for flashing , now keep ur phone ready u have to connect ur phone only after a message showing a image of x10 popup because it has some timeout (keep the back button pressed when connecting to pc a green led should lit up on power on/off button that means u are connected in flash mode) now the flashtool should also show phone connected and it will start flashing firmware automatically. Once flashing is done turn on the phone go to settings and turn on usb debugging and unknown sources.
After that u have to repeat the process of flashing CM kernel and flashing CM through recovery described earlier.
Sent from my R800i using xda premium

arpit85 said:
First restore ur phone to the official
firmware through nandroid restore (u had that backup right ?) then U have to use flashtool for flashing that official Rom, search for flashtool 2.9.1 beta (only this version is compatible with play not use version 3.0) u will find that in xda forums download the file and unpack on the desktop a folder flashtool will be created inside that folder look for subfolder named drivers there will be an executable file ggsetup.exe run that file to install the drivers necessary ,after that copy the firmware .ftf file in the subfolder named firmwares. Now switch off your phone but not connect to pc yet. Run flashtool.exe in that application you will find flash button click on it and then select the firmware u have downloaded to flash , now u will see several files such as adsp.sin etc show up on the right side of flashtool you have to select all those files by ctrl+a or click seperately to select all of them after you are done with it make sure you have clicked wipe data on the upper right side and then click flash now the flashtool screen will show this message - preparing files for flashing , now keep ur phone ready u have to connect ur phone only after a message showing a image of x10 popup because it has some timeout (keep the back button pressed when connecting to pc a green led should lit up on power on/off button that means u are connected in flash mode) now the flashtool should also show phone connected and it will start flashing firmware automatically. Once flashing is done turn on the phone go to settings and turn on usb debugging and unknown sources.
After that u have to repeat the process of flashing CM kernel and flashing CM through recovery described earlier.
Sent from my R800i using xda premium
Click to expand...
Click to collapse
Thanks alot. Now im on Cyanogen with radio working AWESOME. time to customize.

Originally Posted by arpit85
First restore ur phone to the official
firmware through nandroid restore (u had that backup right ?) then U have to use flashtool for flashing that official Rom, search for flashtool 2.9.1 beta (only this version is compatible with play not use version 3.0) u will find that in xda forums download the file and unpack on the desktop a folder flashtool will be created inside that folder look for subfolder named drivers there will be an executable file ggsetup.exe run that file to install the drivers necessary ,after that copy the firmware .ftf file in the subfolder named firmwares. Now switch off your phone but not connect to pc yet. Run flashtool.exe in that application you will find flash button click on it and then select the firmware u have downloaded to flash , now u will see several files such as adsp.sin etc show up on the right side of flashtool you have to select all those files by ctrl+a or click seperately to select all of them after you are done with it make sure you have clicked wipe data on the upper right side and then click flash now the flashtool screen will show this message - preparing files for flashing , now keep ur phone ready u have to connect ur phone only after a message showing a image of x10 popup because it has some timeout (keep the back button pressed when connecting to pc a green led should lit up on power on/off button that means u are connected in flash mode) now the flashtool should also show phone connected and it will start flashing firmware automatically. Once flashing is done turn on the phone go to settings and turn on usb debugging and unknown sources.
After that u have to repeat the process of flashing CM kernel and flashing CM through recovery described earlier.
Sent from my R800i using xda premium
Click to expand...
Click to collapse
Thanks alot. Now im on Cyanogen with radio working AWESOME. time to customize.
Click to expand...
Click to collapse
Congrats... Enjoy playing with ur play (even I not had that luck flashing because I had some pc problems here,still stuck on stock 3.0.1.A.145) once had CM but without radio...
Sent from my R800i using xda premium

[GUIDE FOR NOOBS] How to update XPERIA S to Android 4.1.2 JELLY BEAN | STEP by STEP

This question will be posted a dozen times across several threads, thus, I decided to write a step-by-step, fool proof, noob-oriented simple guide; if somebody asks "how to", please feel free to point him/her to this thread to avoid spamming the main discussion / development threads
If you have some experience and this is not your first time flashing go to POST 2 for a quick guide and some tips, without explanations and notes
STEP BY STEP GUIDE:
How to update the Sony Xperia S
to Android 4.1.2 Jelly Bean​
NOTICE 1: This guide will update your Xperia S from ANY previous version to OFFICIAL SONY JELLY BEAN ANDROID 4.1.2 (version 6.2.B.0.200, released May 30th 2013)
NOTICE 2: This guide is for WINDOWS PC USERS, if you have a Mac I can't help you, but the process is very similar
NOTICE 3: This update has nothing to do with SIM unlock, bootloader lock/unlock, root, etc. It doesn't matter if your phone is rooted or not, bootloader unlocked or not because it's the official firmware update
NOTICE 4: The internal SD card contents will NOT be deleted but everything else inside your phone will be reseted to factory defaults because this is a major update, so do a backup if you want to keep call logs, SMS etc. I only backup my SMS and Whatsapp messages, google backs up everything else because I have the backup option activated in settings
NOTICE 5: Your phone needs to be at least at 50% BATTERY CHARGE before updating ("flashing") the firmware. I recommend a full charge, just in case something happens and you need to do it again
Click to expand...
Click to collapse
STEP 1:
Download the Flashtool
You will find the installers here: http://androxyde.github.com/Flashtool/
Go to the "installation" tab, download Flashtool installer v0.9.11.0 and run it
You will have a new folder on your PC: c:\Flashtool
STEP 2:
Download the Jelly Bean firmware update
You will find a link to download the official firmware update here: http://forum.xda-developers.com/showthread.php?t=2302419, download it, say "thanks" to Yakandu, and come back here
SOME NOTICES (I know you are gonna ask):
- That firmware is the plain Sony Generic firmware and works fine for ANY region and has ALL the languages and keyboards included
- The linked firmware is already prepared to be flashed via Flashtool in .FTF format. If you download the firmware from another source it may be compressed with RAR or ZIP ("zipped") and you may need to EXTRACT the .FTF file with WinRAR or ZIP or 7ZIP. if you don't have WinRAR download it from here: http://www.rarlab.com/download.htm
STEP 3:
Let's update the phone!
- Copy the firmware FTF file to c:\Flashtool\Firmwares
- Go to c:\Flashtool\Drivers and run "Flashtool-drivers.exe" to install the proper drivers for Xperia S
- After installing the USB drivers reboot your PC
- Go to c:\Flashtool and run "FlashTool" (run "FlashTool64" if you have Windows 64 bits)
- Click the flash button (yes: the thunder icon up left)
- Select "Flahsmode" and click "OK"
- Select the "LT26 6.2.B.0.200" FTF firmware and click "OK", DON'T TOUCH ANYTHING ELSE
(TIP: If your Flashtool version doesn't have the "OK" button then just double-click the FTF)
- Flashtool will prepare the files for flashing, just be patient
- A Window will pop up asking you to connect the phone in "Flashmode" showing instructions for an old Xperia phone: ignore it, here is how the Xperia S enters "Flashmode":
- Turn off the phone
- Press and hold the VOLUME DOWN key
- Keep it pressed, connect the USB cable to your PC
- Release the Volume Down key when phone's GREEN LED lights up
- Flashtool will start flashing automatically, let it finish to 100%, it takes some minutes
- Disconnect the USB cable when Flashtool reaches 100% and indicates flashing has finished giving some extra info about activating debugging mode etc (don't care, that's optional)
- Turn on your phone (press and hold the Power button until it vibrates or screen turns on)
- The first boot takes some minutes, don't worry let your phone prepare your Jelly Beans for you
- Have fun !! :highfive:
PS1: PLEASE REMEMBER TO SAY "THANKS" to Yakandu (for the FTF firmware) and Androxyde (for the Flashtool)
PS2: And the usual disclaimer, of course: Follow the steps and be careful, I am not responsible if you brick your phone, burn your house, blow your PC or miss the rapture because you followed this guide; I am just sharing what I did to update my own phone :angel: and it worked for me
Click to expand...
Click to collapse
.
.

QUICK GUIDE
DIRECT STEPS TO FLASH THE FIRMWARE for more advanced/experienced users​
- Download the FTF file of your choice
- Always check and get the latest Flashtool
- Install Flashtool
- Install drivers from C:\Flashtool\Drivers
- Copy FTF file to folder C:\Flashtool\Firmwares
- Launch Flashtool or Flashtool64 (depending on your system)
- Press the thunder icon
- Select "Flashmode" and click "OK"
- Choose the FTF
- Tick "No final verification" and click "Flash"
- Let it prepare the FTF file, it takes a couple of minutes
- When asked, power off phone
- Hold volume down button while connecting the USB cable. There you go. Flashtime: about 2 minutes
- Disconnect USB cable
- Power on the phone. First Boottime: about 3 minutes
- Enjoy
.

What drivers to download exactly ? I see drivers for ICS & GB only

3bdo_y said:
What drivers to download exactly ? I see drivers for ICS & GB only
Click to expand...
Click to collapse
Just use the drivers provided by flashtool in the drivers folder
These drivers are for your PC, not the phone

gtrab said:
Just use the drivers provided by flashtool in the drivers folder
These drivers are for your PC, not the phone
Click to expand...
Click to collapse
I have the latest version of flashtool (v 0.9.10.1). I am successfully able to flash any ICS ftf through it. But when i try to flash the .200 Jb firmware, I get an error in the flashtool (installation aborted) and it is asking for drivers. I guess its because the flashtool includes drives for ICS only?

abhik2012 said:
I have the latest version of flashtool (v 0.9.10.1). I am successfully able to flash any ICS ftf through it. But when i try to flash the .200 Jb firmware, I get an error in the flashtool (installation aborted) and it is asking for drivers. I guess its because the flashtool includes drives for ICS only?
Click to expand...
Click to collapse
Drivers are for the PC, not the phone, it doesn't matter which android version you have on your phone.
My advice would be:
- Uninstall Flashtool
- Delete the flashtool folder
- Reinstall flashtool (make sure you really have the latest version)
- Try again
If you still can't flash, try Flashtool Beta6 and please report back
You can find Flashtool Beta6 here: http://forum.xda-developers.com/showthread.php?t=2162907

how about the option of wipe or don't wipe? ha've unchecked those options and no problem at all, just a litle laggy on the main screen

How do you root this JB version? I really want to root but have no idea how

Hi! I have installed this update and everything works accept for Play Store (Unfortunately, Google Play Store has stopped).
I did clean cash, rebooted few times, flashed different releases of JB but still can not get in Play Store.

What About Root?
any method to root it or we will have to wait?
---------- Post added at 11:11 PM ---------- Previous post was at 11:07 PM ----------
What About Root?
any method to root it or we will have to wait?

ill assume that it is the same procedure for Acro S? Wil the update delete alternative launchers like Nova and delete the theme thats have been made?

gtrab said:
Drivers are for the PC, not the phone, it doesn't matter which android version you have on your phone.
My advice would be:
- Uninstall Flashtool
- Delete the flashtool folder
- Reinstall flashtool (make sure you really have the latest version)
- Try again
If you still can't flash, try Flashtool Beta6 and please report back
You can find Flashtool Beta6 here: http://forum.xda-developers.com/showthread.php?t=2162907
Click to expand...
Click to collapse
Tried flashing with the beta version. Still the same error. Installed the drives twice from the drivers folder in Flashtool. No luck
EDIT -
I turned the USB debuging OFF and it worked

drumcodex said:
ill assume that it is the same procedure for Acro S? Wil the update delete alternative launchers like Nova and delete the theme thats have been made?
Click to expand...
Click to collapse
Yes, and yes
It's like a factory reset

abhik2012 said:
Tried flashing with the beta version. Still the same error. Installed the drives twice from the drivers folder in Flashtool. No luck
EDIT -
I turned the USB debuging OFF and it worked
Click to expand...
Click to collapse
Curious detail, nice to hear you succeded

Mine won't do it. When it asks for the flash mode, I press the volume down and power button, the green led lights up but the program won't recognize it, it keeps the window open.

edunmartins said:
Mine won't do it. When it asks for the flash mode, I press the volume down and power button, the green led lights up but the program won't recognize it, it keeps the window open.
Click to expand...
Click to collapse
Why the power button? It's not required. Read the guide again, carefuly.

yeah, I actually don't know where I got it from, but I tried with the volume button alone and it doesn't recognize either =/
Managed to do it, instead of selecting xperia S, I cancelled that window, it then easily recognized my flash mode and installed it

FUNNY
Cosa chistosa OP pensé que tendría JB con PCC de manera oficial, pero tendré que pasar por el método otra vez! jaja
Bueno, veremos si lo instala.
Gracias por tu tiempo y esfuerzo:laugh:

thank you
darkerm said:
What About Root?
any method to root it or we will have to wait?
---------- Post added at 11:11 PM ---------- Previous post was at 11:07 PM ----------
What About Root?
any method to root it or we will have to wait?
Click to expand...
Click to collapse
Hello

vans2anh said:
Hello
Click to expand...
Click to collapse
Hello
I have not yet checked if I can root this new firmware version.
If you need root, search the devs subforum and please report back if you find a rooting method for this firmware.
Bye

[Q] relock bootloader for Xperia s

I want to relock my bootloader for official jelly bean update on PC.........please help me

ishu87scorpion said:
I want to relock my bootloader for official jelly bean update on PC.........please help me
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1527159
Please don't create a new thread.. Search first and then read.. Read and read more..

The link provided for Xperia-S_Relock_bootloader.ftf is dead. If someone has the file and would be so kind as to mirror it it would be awesome. I would have posted on the original thread, but it's in the developer section and I am not allowed to post there. I have tried google search to find an alternative and I have come across one file with the same name, I flashed it with Flashtool and now my Xperia S won't boot, I can get into flashmode and fastboot but that's it.

queloo said:
The link provided for Xperia-S_Relock_bootloader.ftf is dead. If someone has the file and would be so kind as to mirror it it would be awesome. I would have posted on the original thread, but it's in the developer section and I am not allowed to post there. I have tried google search to find an alternative and I have come across one file with the same name, I flashed it with Flashtool and now my Xperia S won't boot, I can get into flashmode and fastboot but that's it.
Click to expand...
Click to collapse
I have also faced the same problem and finally got the solution............
1. Just download the flash tool from here............
http://androxyde.github.io/index.html?1367093576000
2. Download latest Firmware from here..........
http://forum.xda-developers.com/showpost.php?p=24844165&postcount=2
3. And follow this steps...........
>DO NOT CONNECT YOUR PHONE
>First you need to have FLASH TOOL installed from above 1 no. link
Now run FLASHTOOL.
>From FLASHTOOL home, select the flash/lightning bolt button
>Select FLASH MODE
>Select your stock firmware file (.ftf file wich downloaded from 2 no. link)
>WIPE: everything
>If available EXCLUDE: TA. (this option is not available for all stock.ftf files, if it's there just exclude it)
>Now click START button
>After FLASHTOOL prepares files, you should get this screen (or similar depending on version of FLASHTOOL)
>Now connect your phone with Volume key down (-). Flash mode and green LED will blink.
> Now flashing will start.............
>After all activity will done than start your phone and enjoy......
If u need any assistance just post here............

ishu87scorpion said:
I have also faced the same problem and finally got the solution............
1. Just download the flash tool from here............
http://androxyde.github.io/index.html?1367093576000
2. Download latest Firmware from here..........
http://forum.xda-developers.com/showpost.php?p=24844165&postcount=2
3. And follow this steps...........
>DO NOT CONNECT YOUR PHONE
>First you need to have FLASH TOOL installed from above 1 no. link
Now run FLASHTOOL.
>From FLASHTOOL home, select the flash/lightning bolt button
>Select FLASH MODE
>Select your stock firmware file (.ftf file wich downloaded from 2 no. link)
>WIPE: everything
>If available EXCLUDE: TA. (this option is not available for all stock.ftf files, if it's there just exclude it)
>Now click START button
>After FLASHTOOL prepares files, you should get this screen (or similar depending on version of FLASHTOOL)
>Now connect your phone with Volume key down (-). Flash mode and green LED will blink.
> Now flashing will start.............
>After all activity will done than start your phone and enjoy......
If u need any assistance just post here............
Click to expand...
Click to collapse
Thank you very much. This worked. I didn't know flashing a stock .ftf firmware would re-lock my bootloader. It did I flashed LT26i_6.1.A.2.50_1257-5499_WORLD and after that was able to upgrade through PC-companion without any problems. Thank you for the help.

ishu87scorpion said:
I have also faced the same problem and finally got the solution............
1. Just download the flash tool from here............
http://androxyde.github.io/index.html?1367093576000
2. Download latest Firmware from here..........
http://forum.xda-developers.com/showpost.php?p=24844165&postcount=2
3. And follow this steps...........
>DO NOT CONNECT YOUR PHONE
>First you need to have FLASH TOOL installed from above 1 no. link
Now run FLASHTOOL.
>From FLASHTOOL home, select the flash/lightning bolt button
>Select FLASH MODE
>Select your stock firmware file (.ftf file wich downloaded from 2 no. link)
>WIPE: everything
>If available EXCLUDE: TA. (this option is not available for all stock.ftf files, if it's there just exclude it)
>Now click START button
>After FLASHTOOL prepares files, you should get this screen (or similar depending on version of FLASHTOOL)
>Now connect your phone with Volume key down (-). Flash mode and green LED will blink.
> Now flashing will start.............
>After all activity will done than start your phone and enjoy......
If u need any assistance just post here............
Click to expand...
Click to collapse
i flashed LT26i_6.2.B.0.200_WORLD.ftf firmware but i am not able to upgrade through PC-companion or directly from the phone
please help

[FIRMWARE][FTF][C1905]XperiaM [15.1.C.1.17] & [15.1.A.1.9]

Here is the latest firmware for Sony Xperia M [C1905]
Firmware:15.1.A.1.9 Global-Ina.ftf
Download:https://docs.google.com/file/d/0B7wdGoA4WPZAV0ZUcG91UHdWcEk/edit?pli=1

Firmware Version:15.1.C.1.17
Customization Version 1274-5473_R8A
If you do not want the internal data to be wiped then DO NOT FLASH data/userdata partition...
You need to flash this firmware using flashtool..
Download Link
Part1:http://d-h.st/EwN
Part2:http://d-h.st/WUb
Part3:http://d-h.st/fHt
Part4:http://d-h.st/XtQ
Download all 4 parts and keep then in same folder and then extract from part 1 and you will get a full ftf firmware of 610MB..

How to Flash??
1.Download Flashtool and install it.
2.Navigate to C:Flashtool/firmwares and then keep the downloaded file here.
3.Navigate to C:Flashtool/drivers and install necessary drivers from that exe.
4.Run Flashtool
5.Click on thunder icon and select flashmode.You will see a pop-up screen and see then firmware and files inside it..
6.Tick on Data Cache its recommended and tick no final verification.
7.Click on flash..
8.When screen popups disconnect mobile and turn it off. Press and hold volume down button and insert usb cable to socket and usb.
9.Flashing will start and after 2 minutes you will be on the new firmware.
10.After finish remove usb and turn on your device.

It's india or CE ??

darekesp said:
It's india or CE ??
Click to expand...
Click to collapse
Its Indonesia c1905 can tell by the customisation codes
Sent from my C2005 using xda premium

Where Can I find rom for CE ?? C1905

change the customisation numbers In the build.prop to a European one

And what in it for me? I know it's noob question but I don't know what.

any chance in a different upload server as the download speed on dev host is sooo slow, take over 2 hours to download all the files d/l speed wont go past 80kbps (usual d/l speed on everything else is 300kbps+)
thanks

After flash this firmware the bootloader change to unlock bootlaoder allowed=no. This is a problem.You shoud check it.
Thanks.

[Q] My computer cannot recognize this sony xperia arc, trying to flash stock rom on ?

i have this sony xperia arc which got stuck at sony logo. I already download all necessary files for flashing and ftf files. Issue i am having right now i cannot connect this phone with my computer, i have downloaded sony arc drivers in the computer but in order to install them i still cannot see this device in my device manager.
i tried to do all hard reset methods too but none of them worked , tried all possible ways to hard reset
tried back+menu and power
tried home + volume up + power
home + volume down+ power
if anybody knows any other way to do hard reset please let me know
just want to mention i have downloaded flashtools, ftf files please let me know how can i make it visible on my computer

What version of Windows are you using?
僕のLT18iから送られてきた

popthosegaskets said:
What version of Windows are you using?
僕のLT18iから送られてきた
Click to expand...
Click to collapse
sorry for duplicate thread, had some internet issues ,
I am using windows 7

bindudhindsa said:
sorry for duplicate thread, had some internet issues ,
I am using windows 7
Click to expand...
Click to collapse
Ok. I assume you installed Flashtool. Did you install the drivers and put the FTF files in the firmware folder in the Flashtool directory?
僕のLT18iから送られてきた

yes i installed flastool and add ftf files in the firmware folder. but when i open flashtool i cannot see anything on left side menu as described in the procedure.

bindudhindsa said:
yes i installed flastool and add ftf files in the firmware folder. but when i open flashtool i cannot see anything on left side menu as described in the procedure.
Click to expand...
Click to collapse
There should be a button with a lighting symbol. Click on it and select flash mode. Select FTF and the program will do it from there onwards. Just follow the instructions.
僕のLT18iから送られてきた

popthosegaskets said:
There should be a button with a lighting symbol. Click on it and select flash mode. Select FTF and the program will do it from there onwards. Just follow the instructions.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Thanks a lot for all your help friends who watched and helped me in this thread, just want to share my experience with other so if anybody have same problem they can do it
1) Download flashtool, on sony website they told us to download emma software but did not work out for me so i downloaded flashtool directly here from this link
http://forum.xda-developers.com/show....php?t=2335555 (plz check this link twice, dont remember from where i downloaded flashtool software could be this one , sorry googled lot of links for this software
2) download ftf file from this link
http://forum.xda-developers.com/show....php?t=1681542
3) flashtool will go directly to C drive which must be your main drive
4) go to c:/flashtool/firmware and delete anything you have in there
5) when its empty copy ftf file from step 2 and paste it in here
6) open flashtool, click on bolt sign and select this ftf file
7) take out battery of phone, put charger in phone and press back button to enter in flash mode
8) press flash on flashtool software and wait for completion of process
ALL DONE ...