A chance to revive hard bricked devices.. - Sony Xperia ZL

Here's a thread discussing a way to repair hard bricked Xperia Z Ultra and Xperia Z1:
http://forum.xda-developers.com/showthread.php?t=2646405
The tool used here doesn't support Qualcomm APQ8064 (Z & ZL) yet but the developer said, he'll add support if there will be enough requests.
So, if you own a hard bricked Z or ZL (hard bricked means: no fastboot mode, no flash mode working) and you can't send it to service center,
you know what to do..

Seems to be a hell of reset.
...mmm maybe this could restart the battery counter for the ones who have the sudden power off / only on while charging problem :good:

CokeJunkee said:
Here's a thread discussing a way to repair hard bricked Xperia Z Ultra and Xperia Z1:
http://forum.xda-developers.com/showthread.php?t=2646405
The tool used here doesn't support Qualcomm APQ8064 (Z & ZL) yet but the developer said, he'll add support if there will be enough requests.
So, if you own a hard bricked Z or ZL (hard bricked means: no fastboot mode, no flash mode working) and you can't send it to service center,
you know what to do..
Click to expand...
Click to collapse
actually hard bricked phone get easily replaced at service centre bcoz they dont come to know that its rooted or has unlocked bootloader bcoz the phone doesnt start !it worked for many of my friends in india

Related

Xperia Arc Dead during unlock Simlock.[need Help]

Hi all,
Need a solution for repair Arc which is Bricked and not going in Flash Mode
I cant update or use FOTA bricked Software to repair.
it goes straight in ZEUS devide( in device manager) thats is asked Qhsusb_dload
Had used Setool and something messed up and now SMCBOOT has been killed , what i was told.
any solution to repair?
thanks

xperia zl sudden death,boot loop, unlocked bootloader problem !

plz help me, my xperia zl rooted whose bootloader is officialy unlocked, and and i don't have such information that we have to make TA backup also to relock our boot loader as now i come to know that my warrenty got completly vanished when i tried to repair my cell using sony pc companion, as you may knowz, xperia devices suffering from sudden death errors, firstly my device got sudden death and not switch on in normal state, but it starts when i connect it with charger, but now it is not starts using charger connected also, i reflash my xperia zl with official 4.3 firmware for xperia zl using flashtools, but it is not booting up, then i searched internet and i come to knows about all this mess i had done, then i tried to flash official 4.2.2 firmware bit it gives an error "err_severity="minor";err_code="0017";ERR_Dynamic=0x80080012";" plz help me, my parent also shouted on me soo loud, plz help me to restore my phone. I am hopeless !
melvinrobertson said:
plz help me, my xperia zl rooted whose bootloader is officialy unlocked, and and i don't have such information that we have to make TA backup also to relock our boot loader as now i come to know that my warrenty got completly vanished when i tried to repair my cell using sony pc companion, as you may knowz, xperia devices suffering from sudden death errors, firstly my device got sudden death and not switch on in normal state, but it starts when i connect it with charger, but now it is not starts using charger connected also, i reflash my xperia zl with official 4.3 firmware for xperia zl using flashtools, but it is not booting up, then i searched internet and i come to knows about all this mess i had done, then i tried to flash official 4.2.2 firmware bit it gives an error "err_severity="minor";err_code="0017";ERR_Dynamic=0x80080012";" plz help me, my parent also shouted on me soo loud, plz help me to restore my phone. I am hopeless !
Click to expand...
Click to collapse
go to service centre tell them that you were doing a 4.3 update and this happened.they wont recognise that your phone has an unlocked bootloader bcoz it doesnt start!they will replace it make sure you dont have cwm installed.
bhavstech said:
go to service centre tell them that you were doing a 4.3 update and this happened.they wont recognise that your phone has an unlocked bootloader bcoz it doesnt start!they will replace it make sure you dont have cwm installed.
Click to expand...
Click to collapse
i had relock my bootloader through flashtools, but it had just relock the bootloader no drm keys came back, reflash my android 4.3 but mobile is again in a bootloop, so i had given my zl to service centre, they said firstly we will try to install the os, its upto 5 days now, and they are still installing my os back, tommorow i will ask them to replace the cell !
melvinrobertson said:
i had relock my bootloader through flashtools, but it had just relock the bootloader no drm keys came back, reflash my android 4.3 but mobile is again in a bootloop, so i had given my zl to service centre, they said firstly we will try to install the os, its upto 5 days now, and they are still installing my os back, tommorow i will ask them to replace the cell !
Click to expand...
Click to collapse
:good: make sure they dont get to now that it had unlocked bootloader by any means and if it gets replaced make sure to make a TA BACKUP Of new one so that u dont loose be2 n drm keys
bhavstech said:
:good: make sure they dont get to now that it had unlocked bootloader by any means and if it gets replaced make sure to make a TA BACKUP Of new one so that u dont loose be2 n drm keys
Click to expand...
Click to collapse
Hurra my cell got replaced !today only I got the new one, my old Zl was white coloured, but I ask the service centre to give the black colour, I just love the black one, hiphip hurra !
You lucky S.O.B!
Sent from my C6503 using Tapatalk

[q] how to unbrick dead canvas 4 phone challenge

HI EVERY BODY
this is quite challenging , given the various tread on unbricking
this phone MMX Canvas 4 A210, in process of imei solution ( which could not be installed via engineering mode) in process of changing rom, flashed and mistakenly by formating bootloader in sp tool ( phone no longer recognized by PC or go into recovery)
checked all treads on xda but none say about this situation???
any experts or people in this situation????
i have costum rom downloaded, sp tool , scatter txt.
HMM...?
jjwaiting4u said:
HI EVERY BODY
this is quite challenging , given the various tread on unbricking
this phone MMX Canvas 4 A210, in process of imei solution ( which could not be installed via engineering mode) in process of changing rom, flashed and mistakenly by formating bootloader in sp tool ( phone no longer recognized by PC or go into recovery)
checked all treads on xda but none say about this situation???
any experts or people in this situation????
i have costum rom downloaded, sp tool , scatter txt.
Click to expand...
Click to collapse
is your phone even booting up ?
expert required
hi sanjay
thanks for inquiring, but the phone is not booting nor does it goes into recovery mode....i think its boot loader problem,
I read treads on using 100k or 301k ....(many) resistor method, but am confused i dont fry the phone....awaiting patiently for any experts
please give your views if any on boot loader i( if thats the problem).
jj
oh alright !
jjwaiting4u said:
hi sanjay
thanks for inquiring, but the phone is not booting nor does it goes into recovery mode....i think its boot loader problem,
I read treads on using 100k or 301k ....(many) resistor method, but am confused i dont fry the phone....awaiting patiently for any experts
please give your views if any on boot loader i( if thats the problem).
jj
Click to expand...
Click to collapse
it is quite amazing
and if it is not booting up it is gone forever!
Hey my name is sanjana not sanjay!
yogesh.kalyana said:
it is quite amazing
and if it is not booting up it is gone forever!
Click to expand...
Click to collapse
first try watching the names correctly
Hi guys
There is good news for those who have hard bricked phone ( ie the phone don't even have a boot loader, cant start , nor recognized by PC, or go into recovery.... no red light when connected to charger) , i formated via sptool the bootloader and the phone was totally dead....
most said it not possible to revive it .....its in dead zone..... go to service center and change processor.
the new is for all local micromax , karbonn, spice (chinese brand) phone its simple and cost the least and the service is available for just Rs350/- ( $6/-), that to in under 10mins......
jtag service for just Rs1500/- to 2000/- ( $25 to 30/-) for branded phones
if anyone has problems ( bricking) specially in Goa please do post will direct you to the local guy center..
LESSON LEARNT>>>>>>>>>NEVER GIVE UP
jjwaiting4u said:
Hi guys
There is good news for those who have hard bricked phone ( ie the phone don't even have a boot loader, cant start , nor recognized by PC, or go into recovery.... no red light when connected to charger) , i formated via sptool the bootloader and the phone was totally dead....
most said it not possible to revive it .....its in dead zone..... go to service center and change processor.
the new is for all local micromax , karbonn, spice (chinese brand) phone its simple and cost the least and the service is available for just Rs350/- ( $6/-), that to in under 10mins......
jtag service for just Rs1500/- to 2000/- ( $25 to 30/-) for branded phones
if anyone has problems ( bricking) specially in Goa please do post will direct you to the local guy center..
LESSON LEARNT>>>>>>>>>NEVER GIVE UP
Click to expand...
Click to collapse
Locate a jtag center in patna
jjwaiting4u said:
Hi guys
There is good news for those who have hard bricked phone ( ie the phone don't even have a boot loader, cant start , nor recognized by PC, or go into recovery.... no red light when connected to charger) , i formated via sptool the bootloader and the phone was totally dead....
most said it not possible to revive it .....its in dead zone..... go to service center and change processor.
the new is for all local micromax , karbonn, spice (chinese brand) phone its simple and cost the least and the service is available for just Rs350/- ( $6/-), that to in under 10mins......
jtag service for just Rs1500/- to 2000/- ( $25 to 30/-) for branded phones
if anyone has problems ( bricking) specially in Goa please do post will direct you to the local guy center..
LESSON LEARNT>>>>>>>>>NEVER GIVE UP
Click to expand...
Click to collapse
Any help in kanpur

(help)Bricked xperia LT26w aka ACRO S

Can someone help me to revive my hard bricked xperia acro s?are there any solutions to repair the boot of this device?I've got a deadboot acro s. No fastboot mode no flashmode. Only solid red light. PC detects my device as a SEMC flash device, QHUSB device when no drivers installed. My device was bricked upon installation of a custom ROM on CWM called MOKEE OS . I've been searching for solutions but can find any, only solutions for hard bricked xperia SP(repaired via s1tool). Anyone here who has d same problem?
My phone is not under warranty anymore. Anyone who can help?
BUMP
I have the same problem. I tried to replace the driver, the phone was defined as qhsusb_dload. Also tried to set the device as a Qualcomm QDLoader 9008. QPST saw my phone in download mode, but when I try to download something, I get an error "Image Download Failed. Cookie(if present) not received". I think i need a XML-file with settings for my device, and bootloader-mage for QPST. This also dont help me:http://forum.xda-developers.com/showthread.php?t=2439367 , http://forum.xda-developers.com/showthread.php?t=1522351&page=2 . Now i think the problem can be solved only JTAG. My phone - Sony Xperia Acro S (lt26w). Sry for my English, I am from Russia.
those links that you've given will surely not work since those methods are for samsung and htc, and since they have different soc's it will not work. S1tool is a good thing to try but s1 tool doesnt support msm8260 soc which is also an impossible method to repair our device. RIFF jtag box however supports LT26i which has d same SOC with our LT26w. But on riff jtag box website, I cant find JTAG steps for xperia acro s only for xperia S(LT26i). Also im not sure whether this two devices has d same pinouts also. If s1tools supports msm8260 soc already maybe its a good sign for us. Right now d only way is to bring our devices on service centers nearby. It been nearly a year since my XAS died.
Anyone who can help us please?
anyone?Please help :crying:

Sony Xperia M5 flash after No fastboot No Flash mood No Power

I flash my xperia M5 with wrong flash tool version 0.9.19.8 . Now no power no fastboot no flash mood . totally dead . How can I call back my lovely xperia ?
please show me the way .
Use Xperia companion to repair it. I once softbrick my M5 by flashing MM modded firmware, and recovered by Xperia Companion.
its just give red led when you plug your cable right?
Baxx-Stifler said:
I flash my xperia M5 with wrong flash tool version 0.9.19.8 . Now no power no fastboot no flash mood . totally dead . How can I call back my lovely xperia ?
please show me the way .
Click to expand...
Click to collapse
its just give red led when you plug your cable right?
faw_wal said:
its just give red led when you plug your cable right?
Click to expand...
Click to collapse
i have the same problem have you got a solution ? thx
If flashtool asked you about using the FSC script and you hit 'NO', then your device is totaly dead and theres no way to fix it.
If the message of the FSC script didn't pop up, it's the same as hitting 'NO', so it might be dead and only a sony repairment center can fix it.
Flashtool 0.9.19.8 is used for flashing older Xperia devices and is NOT compatible with the M5, therefore no fsc script will have come up and your device is now hard bricked and has to be fixed by the repair centre. Unless you can figure out how to use one of the flashtools to recover hard bricked devices
If someone extracted a scatter file from the E5663 and put it online, this might be a step to repair such bricked M5 dual E5663-devices (as mine ), using the SP Flashtool for Mediatek-phones.
Refer to this post for a link on how to extract the scatter file
https://forum.xda-developers.com/xperia-m5/help/scatter-file-sony-m5-dual-e5663-t3561228
vivi2218 said:
i have the same problem have you got a solution ? thx
Click to expand...
Click to collapse
yes but you to have sigma box and you can fix it

Categories

Resources