Lenovo quad phones - Upgrading, Modifying and Unlocking

For LENOVO Ideaphone A880 with MT6582 Quad core issues and firmware upgrade.. Rooting for A880 model
New model A889 firmware is available for download contact OP :99% similar firmware to A880 except for build.prop now A889 is at build S017.
UPDATE For 10-April-2014 version S027 for A880 has been completed by MANNUR . This is based on OTA latest
Flash TWRP recovery then flash the S027 update zip it will NOT delete the data (or installed 3rd party apps)
then flash the second portion to put in GMail /YouTube/Google calendar/Talk
Instructions and download links in PDF documents with links on NEEDROM sites
The TWRP recovery can be flashed through MobileUncle Tool :
This firmware is PRE-ROOTED!
A880 S027 updated from MANNUR (recognised by MANNUR) : http://www.needrom.com/mobile/gapps-for-mannur-lenovo-a880/
For A889 S017 (updated MANNUR based by CRACKTECH) : http://www.needrom.com/download/a889-s017-by-cracktech/
(Updated as of 26-Aug-2014)

The fast istallation of A880 build 027 with smaller bottom task bar firmware
WELCOME TO THE NEW PORT OF CALL FOR ALL A880 OWNERS, AFTER WE HAD SCOURED AROUND (and manged to find this Russian sourced firmware upto version S027 from S020) FOR THE RARE LENOVO A880 FIRMWARE WE MANAGED TO without complete GAPPS added in the TWRP zip) FIRMWARE build 027 (dated March 2014 build S027). IT IS A CUSTOM BUILD with TWRP Recoveryand correctly Rooted with working busybox.
But now there is another STABLE version from RUSSIA that is ported by a a person named MANNUR, this is the best - No random reboots, No losing 3G signals off and on, no losing SMS send operation, No chinese speaking boot up .
https://drive.google.com/file/d/0BzXIan93EkgkRDduVEdsVDhqY1U/edit?usp=sharing
This will update your firmware to S027.If you have already have TWRP recovery installed from the S020 by MANNUR (NOT by the Chinese firmware)
http://1drv.ms/1nlTEpR
HAVE PROVIDED YOU WITH INSTRUCTIONs/GUIDE IN PDF FORMAT DOCUMENTS , IT HAS LINKS TO DOWNLOAD THE NECESSARY FILES FOR COMPLETE AOSP COMPATIBILITY for S027
THIS IS THE FINAL DEFINITIVE Version for A880.
PDF Documents with download links :
https://drive.google.com/file/d/0BzXIan93EkgkMTV2d3hDaGR6cEE/edit?usp=sharing

First things first - read carefully!
UPDATED to MANNUR S027 version OTA enabled _ Go to this thread to download the much talked about A880 firmware (the only STABLE and no hassle no problem S027 version ROM check regularly for other postings and newer updates) : http://www.needrom.com/mobile/gapps-for-mannur-lenovo-a880/ (RUSSIAN Sourced not half cooked Chinese ROM)
I am not the originator of this firmware postings just part of the crowd that is finding it hard to get by without an updated and rooted firmware. Maybe after this there will be more contributors from the MT6582 forums. Since this is a popular and upcoming phablet model mostly from Middle East to the East in Asia onwards.Although I critisized the OP of the thread for posting a crippled ROM without ever following up during the first few days of his post (I called him an absentee contributor) and he got to know about it and then started to slowly release ROOTING method but nothing else.
(Superseeded by MANNUR/ CRACKTECH Updared from MANNUR version S027) flash the MANNUR S027 firmware ith included TWRP recovery.
So first thing download the firmware and flash using the latest SPFlashTool or MTK FlashTool v5.1343.01. Immdediately after that Root it with VROOT. CONTRARY TO THE INSTRUCTIONS DONT UNINSTALL THE CHINESE SUPERUSER, IT IS A NICE AND USER FRIENDLY VERSION.
I am telling you NOT to uninstall the Chinese Superuser because it has build in facilites like System App uninstaller and others that is a premium option on SuperSU or Superuser. Anyway the freezing and uninstallation of the the Chinese Superuser is tricky even for the moderate user and installation of "busybox" if not done properly will result in you losing the internal storage use.
I recommend using MTK FlashTool rather than SPFlash tool,I failed to flash this damn thing with Sp flashtool but it sailed through with ease on MTKFlashtool.
The factory release MTK FlashTool equivalent and better than SPFlashtool is included
The latest version of VROOT :{ [ O M I T T E D}
http://www.mediafire.com/view/tdj85ezzpcc1qsb/UPDATE_TO_MANNUR_S027_LENOVO_A880_2ND_VERSION.pdf

Esssential Readings
How to create scatter file ,CWM, Backup and rooting with MTK Droid Tools:
http://www.gizbeat.com/3038/new-mtk-droid-tools-released-compatible-with-mt6592/
How to flash with SPFlashTool : http://www.gizbeat.com/2912/how-to-...6595-mtk6592-mtk6589-mtk6572-mtk6582-mtk6577/
How to create CWM recovery : http://www.gizbeat.com/3108/

a880
i got the a880_s018_140102 build. the phone came pre rooted. it got supersu in it. but after a while the root is just gone. i don't know what i did. tried rooting using vroot. got root access for a while and then it's gone. so i root again then i uninstall the supersu. just used the chineese superuser. success..been 3 days and the root access still here. but i still constantly check the root access. i don't know why it was gone in the first place. the rom is stable now so if anybody would like me to make a backup, i can make backup using mtk droid tool.

ilut74 said:
i got the a880_s018_140102 build. the phone came pre rooted. it got supersu in it. but after a while the root is just gone. i don't know what i did. tried rooting using vroot. got root access for a while and then it's gone. so i root again then i uninstall the supersu. just used the chineese superuser. success..been 3 days and the root access still here. but i still constantly check the root access. i don't know why it was gone in the first place. the rom is stable now so if anybody would like me to make a backup, i can make backup using mtk droid tool.
Click to expand...
Click to collapse
vroot Root access haven't disappeared since i root my phone as far as i'm concern. like u mentioned earlier, SuperSu won't work with vroot. just use the RootMaster (which is came with vroot) and it will never go away (your root). although its in chinese, just tap the green button and everything working fine :good: :fingers-crossed:

Regarding vroot
O M I T T E D (NO LONGER REQUIRED TO USE VROOT PREROOTED FIRMWARE PROVIDED BY MANNUR (RUSSIAN Source) instead of CHina sourced firmware

saw sudden rise in ROMs for this phone. but is it worth to try? Gonna try that MIUI version

delorah said:
saw sudden rise in ROMs for this phone. but is it worth to try? Gonna try that MIUI version
Click to expand...
Click to collapse
give us your opinion after u try it.

'tried' the MIUI yesterday. i didn't actually. i followed the instruction on how to install the ROM. after installed the MobileUncle Tools i thought my phone screwed up. trying to find the recovery_A880.zip but not shown in the list. and then my apps getting the FC which is not normal. i dunno how or why but i guess i'll be waiting for another way to easily install ROMs for this phone (if there any). and i'm quite happy with the original+vroot. by the way if you're looking to update your RootMaster (vroot) from version 1.0.5 to 1.0.6 please don't. do it if only u can read chinese or doesn't mind or know what you are doing. well, i don't mind.

How to get MIUI does it have English or just in CN language only?
I'm owning a working version of Lenovo A880 with a proper Google Play Store installed when even before I updated the stock rom. Weird, I didn't know people had problem with GAppStore since I've had one, Originally my phone cannot connect to PC via USB storage using the stock ROM, so I experimented using the USB options, I tried the most bottom option, which is connect as a Built-In CD-ROM, it then prompts me to install a Chinese Software in mt PC and then it detects my phone, and then upgraded my Lenovo Launcher to a newer version. By then I haven't root yet until I tried VRoot and it's successful and also SuperSU is working fine for me. So which ROM am I using now actually? If there is a MIUI rom I wanna try too but how guys.

how it's can be happen ?

RyanAsAlways said:
I'm owning a working version of Lenovo A880 with a proper Google Play Store installed when even before I updated the stock rom. Weird, I didn't know people had problem with GAppStore since I've had one, Originally my phone cannot connect to PC via USB storage using the stock ROM, so I experimented using the USB options, I tried the most bottom option, which is connect as a Built-In CD-ROM, it then prompts me to install a Chinese Software in mt PC and then it detects my phone, and then upgraded my Lenovo Launcher to a newer version. By then I haven't root yet until I tried VRoot and it's successful and also SuperSU is working fine for me. So which ROM am I using now actually? If there is a MIUI rom I wanna try too but how guys.
Click to expand...
Click to collapse
off course the phone come with working Gapps. the problem with Gapps is when people trying to install the custom ROMs which is some of them are not Gapps-ready.
I tried MIUI ROM for this phone and all i can say is its good. but some of the menu are in chinese. even if u change the language to english. not a problem if u can read it though. and i don't mind
---------- Post added at 12:29 AM ---------- Previous post was at 12:23 AM ----------
i recently flashed my phone with MIUI ROM. before installation i did do backup my old (original) ROM using CWM. i tried to restore my old ROM but it seem to be unsuccesful. stuck at boot. any tips to overcome this problem?

Hmmm oh I see., Well in that case so how could I use the backup apps or anything to backup all my apps and data? So when there is a proper ROM in the future then I'll be able to transfer it to the new ROM. But all the time, I'm very confusedd about backing up the phone since it's like pretty hard for me to understand. Is there an easier way to backup my phone?

RyanAsAlways said:
Hmmm oh I see., Well in that case so how could I use the backup apps or anything to backup all my apps and data? So when there is a proper ROM in the future then I'll be able to transfer it to the new ROM. But all the time, I'm very confusedd about backing up the phone since it's like pretty hard for me to understand. Is there an easier way to backup my phone?
Click to expand...
Click to collapse
the CWM provided by the uploader (ref: needrom.com) is in chinese language but if u are familiar with older CWM version then u have no problem using it. the only problem is the credibility of backing up your ROM. i did a backup for my ROM and and it seem i cannot restore my phone with the backup.

ive managed to install cwm recovery and superuser app into my lenovo a880, but it is custom rom with build number 013, so far no luck in installing and rooting 020

Installing 020 build ROM A880
I had a few near misses with this ROM somtimes after asuccessful flash it bootloop with an error message at the bottom left corner and will not bootup but only bootloop. I tried applying some recommended solutions like only flashing recovery (stock) and kernel only no go.
You will not be successful in flashing this ROM using other downloaded SPFlashTool only the one that came with the ROM.
I am currently on 020 which I manually install GApps .
The A880 ROM can only be ROOTED with VROOT and nothing else.I tried other method no luck only corrupt the firmware especially 013 ROM.
I replaced the bootup/shutdown animation with LENOVO stock bootanimation and no more talking chinese during bootup. by the way the 020 ROM is specially for CinaUnicom network. but the A880 with "gps.conf" file included has got awesome GPS performance. you just have to put in "gps.conf" settings file inside the /system/etc/ folder that matches your region.I always have full house on the satellite lock on.

cracktech said:
I had a few near misses with this ROM somtimes after asuccessful flash it bootloop with an error message at the bottom left corner and will not bootup but only bootloop. I tried applying some recommended solutions like only flashing recovery (stock) and kernel only no go.
You will not be successful in flashing this ROM using other downloaded SPFlashTool only the one that came with the ROM.
I am currently on 020 which I manually install GApps .
The A880 ROM can only be ROOTED with VROOT and nothing else.I tried other method no luck only corrupt the firmware especially 013 ROM.
I replaced the bootup/shutdown animation with LENOVO stock bootanimation and no more talking chinese during bootup. by the way the 020 ROM is specially for CinaUnicom network. but the A880 with "gps.conf" file included has got awesome GPS performance. you just have to put in "gps.conf" settings file inside the /system/etc/ folder that matches your region.I always have full house on the satellite lock on.
Click to expand...
Click to collapse
now u running 020 version? in setting, system update menu functioning or not??

i actually succesfully manage to update mine from firmware 013 to 016, what i did was flash the custom rom that that has supersu first(btw, i also manage to get cwm in my phone), then i simply flash the other custom rom which is 016 based. 016 based is the best so far because all are working including the system update and font manager.. the only thing is i can actually get to download the new 020 firmware through this rom but when it try to install somehow it failed

hzai93 said:
i actually succesfully manage to update mine from firmware 013 to 016, what i did was flash the custom rom that that has supersu first(btw, i also manage to get cwm in my phone), then i simply flash the other custom rom which is 016 based. 016 based is the best so far because all are working including the system update and font manager.. the only thing is i can actually get to download the new 020 firmware through this rom but when it try to install somehow it failed
Click to expand...
Click to collapse
where u get base 016 rom?

Related

[Q] Help - Loki-ifying Error.

Hello, myself Zoya... I bought LG G Pro F240L in mid 2013... I didn't like the Korean UI so I updated it. And I used this thread
G2 Apps Added... and I used update v5.5.
I successfully flashed it but Forgot to flash Baseband and I was stuck in Boot LG logo... Then I did Data factory Reset and My phone turned on. Even my mobile data was working without Baseband. But after some days I flashed the Baseband as well... F240L Baseband... All was well except the Theme problem. I mean I was not being able to change to any Theme. It was saying Unfortunately Home Has Stopped everytime I brows the Theme list. And very slow 2G speed in India.
So I am on G2 Apps Added v5.5 CM right now. and wanted to fix it by reinstalling the same Rom again. It said we don't need to be on Stock so I tried it on v5.5 CM itself. But everytime I try to flash it It says
Update Failed.
Error: Loki-ifying Error.
The error was on some file named 'boot' in some directory. I didn't copy that. So what do do now to get any update that will fix all my problems.
I can moove to other rom if Needed. Update to Kitkat will also be considered... The main question is what do I do at this point.
Please provide step by step proceedings too... I don't wanna End p Bricking my phone for lak of knowledge...
Thanks...
I think at least you could use the LG tool in forum to reset to phone totally back to factory state.( Not just wipe it in Recovery)
Then start from srcatch. Root, unlock using FreeGee, install recovery. flash rom
The Loki-ifying Error seems like you used a older version of recovery and not have proper loki support. Or maybe there is some problem in the rom file you downloaded. I really don't know for sure.
I would recommend use recovery to wipe everything and then clean install the rom and proper baseband for your phone. It is really hard to brick the phone if you keep your mind clear. Always do a Nandroid backup first

[Q] CyanogenMod not getiing installed. SuperSU Crashing.

Hello All,
I am a beginner to all this stuff. I wanted to root my phone after seeing OnePlus One running on CyanogenMod. So, first I tried to directly install the Mod using the softwares downloaded from Cyanogen's website. But the software gave the error "Unsupported Firmware". Then I researched a bit on manually installing the mod. I followed the instructions.
- First I rooted my phone with Odin 3.09v
- Installed ROM Manger on my phone (Meanwhile the SuperSU app kept on crashing)
- Somehow I managed to install ClockworkMod (What I did was downloaded SuperSU apk, installed it again. It started working and then, not losing the chance I installed ClockworkMod).
- Then I tried to install CyanogenMod through ROM Manager
- My phone re-booted and then gave a error "Can't install package on incompatible data".
- I'm having the latest snapshot version on CyanogenMod.
- Then I left the things as it is. No rooting, unrooting, etc.
- So, now I tried to take backup of my current ROM, in case something happens at least I'll be having something with me to recover
- I used ROM Manager to take backup. But it gave the error "Can't create the image"
So, now I'm stuck between middle of nowhere. Please help me out to reach to some point.
svikramajit said:
Hello All,
I am a beginner to all this stuff. I wanted to root my phone after seeing OnePlus One running on CyanogenMod. So, first I tried to directly install the Mod using the softwares downloaded from Cyanogen's website. But the software gave the error "Unsupported Firmware". Then I researched a bit on manually installing the mod. I followed the instructions.
- First I rooted my phone with Odin 3.09v
- Installed ROM Manger on my phone (Meanwhile the SuperSU app kept on crashing)
- Somehow I managed to install ClockworkMod (What I did was downloaded SuperSU apk, installed it again. It started working and then, not losing the chance I installed ClockworkMod).
- Then I tried to install CyanogenMod through ROM Manager
- My phone re-booted and then gave a error "Can't install package on incompatible data".
- I'm having the latest snapshot version on CyanogenMod.
- Then I left the things as it is. No rooting, unrooting, etc.
- So, now I tried to take backup of my current ROM, in case something happens at least I'll be having something with me to recover
- I used ROM Manager to take backup. But it gave the error "Can't create the image"
So, now I'm stuck between middle of nowhere. Please help me out to reach to some point.
Click to expand...
Click to collapse
Ok, first I think your SuperSu is not working properly. Open the Supersu app to see if it needs to update binaries. If it continues to crash, go into recovery manually (not using rom manager) and flash the latest SuperSu. Wipe Cache, go to advanced and Wipe Dalvik. Reboot. Your phone will say "android is upgrading" for a bit. Once it's booted up, go back into the supersu app and see if it needs to update binaries, if so- let it update, if not- move on. Here's a link to download SuperSu 2.02
Go back into recovery manually and select backup and restore-> backup to sdcard (or sdcard1, external sd, is my preference) This will start the backup process.
Once that is done, you need to find the CyanogenMod file specific to your phone, then you can enter recovery and flash it.
If you have trouble entering recovery, you can flash a new one via recovery or with odin.
Hello absinthesummer,
I followed every instruction you told. Now I'm done till creating backup. The problem now I'm facing is this 'Status 7' error. It says "Can't install package on incompatible data.....". Now what to do?
Status 7 is a very specific error. It means your recovery is out of date. Get the absolute newest you can find and try again. This is good news though, you've got progress!
---------- Post added at 11:48 AM ---------- Previous post was at 11:46 AM ----------
Edit: flash the latest recovery you can find via Odin. You probably won't be able to do it in recovery while you're getting the status 7 error.
absinthesummer said:
Status 7 is a very specific error. It means your recovery is out of date. Get the absolute newest you can find and try again. This is good news though, you've got progress!
---------- Post added at 11:48 AM ---------- Previous post was at 11:46 AM ----------
Edit: flash the latest recovery you can find via Odin. You probably won't be able to do it in recovery while you're getting the status 7 error.
Click to expand...
Click to collapse
No, I've got the latest recovery. But I figured out the problem. It was with the package I downloaded. The CM 11 M9 version was giving errors. I researched and tried few fixes, but still it didn't work.
The fixes I tried :-
1. Deleting some coding lines from the updater-script file. But this fix gave the status 6 error.
2. Changing the updater-script file format to UNIX format. Then again it gave the status 7 error.
So, what I did, when I had no more brain to fix it, I downloaded the CM 11 M6 version and tried installing it. And VOILA! It worked. Then I updated it to M9 version through phone. Now it's working. Though it has some bugs. And some features are missing too that I wanted badly.
svikramajit said:
No, I've got the latest recovery. But I figured out the problem. It was with the package I downloaded. The CM 11 M9 version was giving errors. I researched and tried few fixes, but still it didn't work.
The fixes I tried :-
1. Deleting some coding lines from the updater-script file. But this fix gave the status 6 error.
2. Changing the updater-script file format to UNIX format. Then again it gave the status 7 error.
So, what I did, when I had no more brain to fix it, I downloaded the CM 11 M6 version and tried installing it. And VOILA! It worked. Then I updated it to M9 version through phone. Now it's working. Though it has some bugs. And some features are missing too that I wanted badly.
Click to expand...
Click to collapse
Awesome! I'm glad you got it working. You can also try comparing the two files to see what's different, or maybe swap the updater script. Maybe you'll be able to get the one you wanted working with a little modification
absinthesummer said:
Awesome! I'm glad you got it working. You can also try comparing the two files to see what's different, or maybe swap the updater script. Maybe you'll be able to get the one you wanted working with a little modification
Click to expand...
Click to collapse
Thanks to you. You too helped me in working it out!
But, I have some more questions
Question 1 : If I flash stock ROM on my rooted phone, will I receive the new updates? If yes, will I be able to install them via Kies on my phone without getting into any trouble?
Question 2 : If I install stock ROM of any other phone, say Galaxy S5, will it work on my phone properly without any problems? If yes, will I receive the updates for that too and able to install them via Kies? If no, is there any way to install it? Cause I have seen people using S5 ROM on Note 2.
First question the answer is yes. As long as you have the stock recovery and stock kernel (along with the stock rom) you will receive ota updates. You can use ota root keeper (an app) to keep root during an ota update. There are many people who choose to stay fully stock but root to get rid of bloatware & stuff. However, if you want to get ota, I recommend freezing the bloatware instead of uninstalling, because an ota usually replaces old bloatware with new bloatware and can sometimes abort the ota if those apps are missing... but keep on mind this is not always the case, only certain devices.
Second question, no you cannot. Roms from other devices have to be ported to be compatible. But if you look in the development forums, you can find many roms that are basically stock but have specific features from other roms, along with the system ui (ie S5, note 3, & so forth). These rom devs have ported either parts/features or full on roms to be compatible on our device. They are excellent! I recommend reading up them and if you see some you like, try them out!
absinthesummer said:
First question the answer is yes. As long as you have the stock recovery and stock kernel (along with the stock rom) you will receive ota updates. You can use ota root keeper (an app) to keep root during an ota update. There are many people who choose to stay fully stock but root to get rid of bloatware & stuff. However, if you want to get ota, I recommend freezing the bloatware instead of uninstalling, because an ota usually replaces old bloatware with new bloatware and can sometimes abort the ota if those apps are missing... but keep on mind this is not always the case, only certain devices.
Second question, no you cannot. Roms from other devices have to be ported to be compatible. But if you look in the development forums, you can find many roms that are basically stock but have specific features from other roms, along with the system ui (ie S5, note 3, & so forth). These rom devs have ported either parts/features or full on roms to be compatible on our device. They are excellent! I recommend reading up them and if you see some you like, try them out!
Click to expand...
Click to collapse
- Stock Recovery
- Stock Kernel
- OTA Root Keeper
- Bloatware
Well, to be honest, just right now I learned these new terms but know nothing about them. Can you please give me a brief description for these four terms so that when I do advanced search on them, I'd have a idea in my mind about what these are. It will make it easy for me to understand the advance things.
And I'm looking for S5 ROM for my phone. Let's see what I get.
One more question. I made a backup of my rooted stock ROM via latest ClockwordMod, manually. Now, if I reset the binary counter using Triangle Away and then wipe Cache and Dalvik and then flash my stock ROM which is located on my memory card and then after flashing I use SuperSU to unroot and then a factory reset (I don't know the method of factory reseting cause I'm confused. Whether to do it manually, like going into recovery mode or just from the phone settings. So please tell me this also.), will my phone be unrooted totally?
And sorry for bugging you so much. I hate to do that, but I don't want to take risk with my phone. So I am just collecting information. I hope so many queries are not a problem for you.
Ok...
You already know what a rom is. A kernel is a lower-level base. It controls the hardware. So when you do something on the interface, in the rom, it tells the hardware how to react. (Ie if you're playing music it tells which speakers to play and how loudly). The kernel controls almost everything you can't see, it relates to performance. Most stock kernels can be limiting as they underclock the cpu by a certain percentage. Because of this, people seek out custom kernels to max out their device's potential. Louder speakers, faster cpu, better graphics, etc. This is all stuff the kernel can optimize... but because you can change so many factors there is a risk of instability if you push your device too hard (max performance) or limit it too much (max battery saving).
Recovery is exactly what it sounds like. When you boot your device the very first screen that pops up is the bootloader. It's giving you time to boot in 3 different modes. The first mode, by doing nothing, is a normal boot into the rom/OS. The second mode, which you get to by one button combination, takes you to recovery. The stock recovery is very limited. It gives you the option to factory restore, wipe cache, update, or boot normally. Stock recovery only exists for emergencies, if your phone fails to boot normally. We have custom recoveries so we can do more stuff, flash custom roms and tinker with things. The third mode is download mode/Odin mode. This is the bootloader interface itself. It's the last resort for recovery if your recovery has been damaged or corrupted. It allows you to connect to Odin or kies and perform an emergency recovery of the device. If you damage your bootloader, your device is completely bricked.
So the order of operation is this:
Lowest level- bootloader
Second level- recovery
Third level- kernel
Fourth level- rom
Bloatware is all the pre-installed apps that your carrier adds to your phone. Most people don't use it, don't like it, and don't want it. That why we root. Without root we basically are just guest users of the device. With root we become the administrators of the device. Until you root, your carrier has admin rights over your phone (to use windows terms).
When you receive an ota update, your carrier can make it to where the update won't proceed if their pre-installed apps have been removed (although this isn't always the case). Additionally, the update package itself checks the integrity of the device. It checks recovery, kernel, and rom. If any have been altered, it will not proceed because it could cause conflict and potentially brick your device. That's why those things have to be stock.
Ota root keeper is simply an app that backs up your superuser rights before an update and restores them after its done.
You should be able to find plenty of roms with S5 features. I'm using one that makes my device fully like an S5 (my device even thinks it is an S5 and every app identifies it as such) I can think of at least 2 others as well. There's plenty to choose from, and if you see a rom you like but it's mudding a particular feature, you can probably find that feature as a stand-alone installation in the forum's themes & apps section. Just about every feature of S5, S4, and note 3 has been ported to this device, so look around!
Also, for future reference, if someone helps you on the forum, hit the thanks button instead of saying it. I don't mind either way, but some people get annoyed and will stop helping them if they don't hit that button lol. It's silly, but it's part of "forum decorum"
---------- Post added at 12:54 AM ---------- Previous post was at 12:44 AM ----------
svikramajit said:
One more question. I made a backup of my rooted stock ROM via latest ClockwordMod, manually. Now, if I reset the binary counter using Triangle Away and then wipe Cache and Dalvik and then flash my stock ROM which is located on my memory card and then after flashing I use SuperSU to unroot and then a factory reset (I don't know the method of factory reseting cause I'm confused. Whether to do it manually, like going into recovery mode or just from the phone settings. So please tell me this also.), will my phone be unrooted totally?
And sorry for bugging you so much. I hate to do that, but I don't want to take risk with my phone. So I am just collecting information. I hope so many queries are not a problem for you.
Click to expand...
Click to collapse
You're fine, I don't mind answering your questions. Yes, you can unroot fully in the way you just mentioned but you don't even have to go through all the trouble of factory reset. Just unroot in the app. The app can be uninstalled afterwards via the play store.
You can factory reset either way, the same commands are given no matter which way you go about it. But it can be more efficient to do it from recovery because when you do it from the rom it has to create a wipe script for when it reboots, and it has to shut down the rom first. If you do it from recovery it doesn't have to anything, the rom isn't running and it can execute the wipe command immediately. (The wipe command is wipe /data /cache etc)
Thanks again for all that great info!
Questions : Is there no way to fix the Bootloader if it gets damaged by chance? And which S5 ROM are you using?
svikramajit said:
Thanks again for all that great info!
Questions : Is there no way to fix the Bootloader if it gets damaged by chance? And which S5 ROM are you using?
Click to expand...
Click to collapse
If you damage the bootloader it's a hard brick and you would have to send it in for jtag services (this is a low level emmc chip flash service) The bootloader won't get damaged unless you do something to corrupt it. If you ever feel the need to flash a new bootloader, do it via Odin, never recovery! If you remember that you should be fine.
svikramajit said:
Thanks again for all that great info!
Questions : Is there no way to fix the Bootloader if it gets damaged by chance? And which S5 ROM are you using?
Click to expand...
Click to collapse
I meant to tell you I'm using DN3 rom. It has an aroma installer that lets you choose whether you want an S5 ui, a note 3 ui or a mixed ui. Choosing S5 ui & S5 build prop allows your device to work with S5 apps & it looks just like an S5. It's not the only rom out there, but it's beautiful, fast, and stable & the team works hard on it.
absinthesummer said:
I meant to tell you I'm using DN3 rom. It has an aroma installer that lets you choose whether you want an S5 ui, a note 3 ui or a mixed ui. Choosing S5 ui & S5 build prop allows your device to work with S5 apps & it looks just like an S5. It's not the only rom out there, but it's beautiful, fast, and stable & the team works hard on it.
Click to expand...
Click to collapse
Hey absinthesummer!
I tried to unroot my phone with the method I told you. But in the restore option, I am stuck at 'Checking MD5 Sums..'. What to do now?
MD5 checking takes forever! You have to wait it out. Most recoveries offer a way to turn it off. You shouldn't have to factory reset though, just click unroot in the super su app and then uninstall the app from the play store.
absinthesummer said:
MD5 checking takes forever! You have to wait it out. Most recoveries offer a way to turn it off. You shouldn't have to factory reset though, just click unroot in the super su app and then uninstall the app from the play store.
Click to expand...
Click to collapse
I waited and the system was restored. But I got an error on 'Restoring Data'. I rebooted the phone and now it's showing glowing Samsung logo from like 3-4 minutes.
I've seen that before. Can you get back into recovery? You may have to flash stock in Odin, flash recovery and then do the Restore again. Data got messed up.
absinthesummer said:
I've seen that before. Can you get back into recovery? You may have to flash stock in Odin, flash recovery and then do the Restore again. Data got messed up.
Click to expand...
Click to collapse
I'll try removing the battery now. Let's see what happens.
Ok if you can get into recovery, do a fresh flash and then try to restore again. And see if it offers a way to turn off MD5 checking. That's why I use philz or twrp, they offer that and move much faster through MD5 check by default.
---------- Post added at 11:13 AM ---------- Previous post was at 11:12 AM ----------
If you still fail on data, flash stock in Odin, flash custom recovery, then you should be able to enter recovery and have a successful restore.

[Q] I have a sem-complicated soft bricking problem

So I wanted to root this tablet, and I used a video online to help me do so.
I installed the USB drivers, got Odin 3, and loaded in CF_AutoRoot_Port_T700_BeansTown106.tar
It rooted my tablet and I was pretty happy about that. I then had update supersu, by getting the SU binaries.
So I came to this site and downloaded the recommended Supersu, and flashed it. It fixed that.
Well, then I wanted to get a custom ROM, so I flashed the Cyanogenmod 12, along with the component with it.
I found I didn't like it compared to my 5.0.2 Lolipop, and so I tried finding the stock ROM.
The gator download site everyone was showing refused to let me download anything, and just about all the ROMS seemed like they were from countries other than the U.S.
I searched for awhile, found nothing, then found a ROM called the Ironman Lolipop ROM, it was close enough to stock, so I flashed it.
Suddenly everything was normal, but then supersu needed binaries again, and after I flashed it again, it just stopped asking if it should grant permission, making the root useless.
Frustrated, I looked online again for ROMS, found a Canada one, decided to download, it would take two hours.
Well I'm not from Canada so I doubted it would work, and didn't want to wait two hours.
I decided to Flash back the Cyanogen.
Well unfortunately I went in and found out that I had deleted it earlier, whoops. And so my data wipe brought me back to Ironman ROM.
So, thinking that flashing to Iron Man screwed up my root I tried to re-root with Odin, the same way as the first.
It then had trouble booting, and when it did, it hung at the Samsung logo.
Now I've been stuck on this logo for about an hour, I can't turn it off. I'm assuming the only way to is to wait for it to run out of power.
I have been using TWRP this whole time.
I twice have backed up, and wiped data.
When I hit restore I saw no backups though, I'm not sure if they were for the ROM?
I don't know, I only have a year of experience.
Edit: I have an 8.1" T700 from Amazon.
pennylessz said:
So I wanted to root this tablet, and I used a video online to help me do so.
I installed the USB drivers, got Odin 3, and loaded in CF_AutoRoot_Port_T700_BeansTown106.tar
It rooted my tablet and I was pretty happy about that. I then had update supersu, by getting the SU binaries.
So I came to this site and downloaded the recommended Supersu, and flashed it. It fixed that.
Bla bla ......
Click to expand...
Click to collapse
Hi! To force reboot while in a soft brick, press and hold power+home button+ both volume buttons all at the same time.
Then when the screen goes black, quickly press the odin\download mode button combo or recovery comba if you wish.
Luckily, I have mirrored the latest firmware for the T700 to a faster hosting site. This is an UK firmware and is the latest one. It should flash fine as I have flashed different firmwares from different countries many times.
Download Firmware (fast download): https://www.androidfilehost.com/?fid=24052804347761130
Now, ironrom has problems with root sometimes. When I make roms I don't preroot them as they cause problems of binaries if you preroot them. Anyway feel free to flash the firmware with odin or load an custom ROM to your sd card and flash it.
Hope this helps!
DUHAsianSKILLZ said:
Hi! To force reboot while in a soft brick, press and hold power+home button+ both volume buttons all at the same time.
Then when the screen goes black, quickly press the odin\download mode button combo or recovery comba if you wish.
Luckily, I have mirrored the latest firmware for the T700 to a faster hosting site. This is an UK firmware and is the latest one. It should flash fine as I have flashed different firmwares from different countries many times.
Download Firmware (fast download):
Now, ironrom has problems with root sometimes. When I make roms I don't preroot them as they cause problems of binaries if you preroot them. Anyway feel free to flash the firmware with odin or load an custom ROM to your sd card and flash it.
Hope this helps!
Click to expand...
Click to collapse
Thank you for getting me out of the brick and back to stock.
However going into Supersu it says.
"There is no SU binary installed, and SuperSu cannot install it. This is a problem!
If you just upgraded to Android 5.0, you need to manually re-root- consult the relevant forums for your device!"
My question is, can I properly re-root it the way I had been?
I'm assuming if it soft bricks again I can just reinstall a stock ROM again.
Also all these ROMS and backups take up a lot of space, how would I go about deleting those when I'm done?
pennylessz said:
Thank you for getting me out of the brick and back to stock.
However going into Supersu it says.
"There is no SU binary installed, and SuperSu cannot install it. This is a problem!
If you just upgraded to Android 5.0, you need to manually re-root- consult the relevant forums for your device!"
My question is, can I properly re-root it the way I had been?
I'm assuming if it soft bricks again I can just reinstall a stock ROM again.
Also all these ROMS and backups take up a lot of space, how would I go about deleting those when I'm done?
Click to expand...
Click to collapse
In my files app, look for an folder called TWRP. Your backups are in there. To root simply install twrp and follow the twrp method to root. http://forum.xda-developers.com/showthread.php?p=59638836
You can delete your backups from within twrp. Just select restore, then the backup, then delete.

Flashing a New ROM, Get an Incompatible Baseband Version Error?

Warning: This post is long, and probably full of grammatical errors due to my writing it late at night. a TL;DR is included at the bottom, but to fully understand my problem, I encourage you to read the whole post.
Hello, xdadevelopers community. I really need your help. So, recently I learned how to install custom ROMs myself and the experience has been really informative but also very struggling. To make a rather long story short, I bought a used G3 from my friend, had him root it, put a custom ROM on it, and everything was working fine. Only, that ROM was on Android 5.1.1, which was contemporary to when it was flashed. I wanted 6.0.1, so I went about getting it. I eventually got that up and running with Resurrection Remix, but the battery life was completely awful. Idle is okay, but using the device results in completely intolerable battery life. I asked Reddit what to do, and someone recommend crDroid for it's great battery life. I attempted to install that, and that's where I got the problems discussed in this post.
Post where I got the ROM and GApps from
Specific ROM and GApps I got:
- crdroid-6.0.1-20160118-vs985
- So I go the one for Android 6.0.1, and the most recent one at that, last updated on the 18th of January, for my G3 model the vs985
- for GApps, I selected "ARM", "6.0", and "Stock" from the menu
Could another problem be that the ROM is 6.0.1, and the GApps are 6.0? If so, open GApps version exists of 6.0.1.
Basically, I downloaded the two zip files, the ROM and the GApps. I then formatted my device, wiped it, did a real quick, skip through everything set-up of my current ROM, enabled USB debugging, copied the two zip files (ROM and GApps, both of which were inside a folder I made called ROM) onto my devices internal storage (I don't have an SD Card), and rebooted into recovery. I'm using Team Win Recovery Project (TWRP) v2.8.6.1 if that's helpful at all. Once in recovery, again I wiped the device (using the default wipe function in TWRP, then doing an advanced wipe and specifically selecting cache and Dalvik Cache, just to make sure), and went to flash the ROM, finally. I navigated to the ROM folder it was located it, selected it, and swiped to flash the ROM. I got the following in response:
Installing '/sdcard/ROM/crdroid-6.0.1-20160118-vs985.zip'
...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Checking for BASEBAND version 35B
ERROR: It appears you are running an unsupported baseband. assert failed: h3.verify_baseband("35B:MPSS.DI.2.0.1.c1.13.4-00005") == "1"
E:Error executing updater binary in zip '/sdcard/ROM/crdroid-6.0.1-20160118-vs985.zip'
Error flashing zip '/sdcard/ROM/crdroid-6.0.1-20160118-vs985.zip'
Updating partition details...
...done
Click to expand...
Click to collapse
So basically it failed to flash, apparently because of both an unsupported baseband version and a failure to execute a certain binary. Well, if you know how to fix the executing issue, that'd be great, although that's now what I'm focusing on here. I'm focusing on the baseband, because I believe that may be causing the failure to execute (although, as a newbie, I'm not sure if that's actually true). Apparently it was looking for version 35B, and that's not what I was running. When I set up my current ROM again just to be able to use the device, and checked for the baseband verion, it simply says "Unknown". Also, if you check out that link to the post above, it says:
We're mainly based on CyanogenMod so use custom kernels compatible with them!
Click to expand...
Click to collapse
. Well, I never installed a custom kernel, but I assume my friend did, because when looking at the kernel version on my phone it says:
3.4.0-CM-g74498f7
[email protected] #1
Mon Dec 14 09:48:16 EST 2015
Click to expand...
Click to collapse
.
I'm assuming if it was a non-custom kernel it would just have multiple numbers separated by periods, not have all that info, and it specifically says "CM" in there, so I assume that should work, but am not for certain.
Anyway, back to the baseband. It was looking for a baseband version 35B, which I apparently don't have. I have a few questions about this
1. How are you supposed to know your baseband version if your settings app returns "Unknown"?
2. How are you supposed to know what baseband versions work and what baseband versions don't work on the ROM you plan on flashing prior to doing so? I saw nothing about this from from start to failure to install.
3. If the ROM I intend to flash doesn't support my baseband version, can I install a custom baseband version?
I will admit, I don't even know what a baseband is, and I'm too tired to look it up as I write this.
So that's it. I realize this post is incredibly long but feel like if it was shorter, potentially important information would be nixed. I have a TL;DR below for your convenience, but as I just said, to get all the important information, read everything above, please.
TL;DR:
Tried to install a new ROM
Failed
Failing apparently due to unsuppported baseband version
I can't determine my baseband version b/c my settings app returns "Unknown""
If baseband is unsupported, how do I know which are?
Also apparently "E:Error executing updater binary in zip '/sdcard/ROM/crdroid-6.0.1-20160118-vs985.zip' " is a thing. Caused by unsupported baseband version or entirely different problem all together?
Also maybe the ROM being 6.0.1 and the openGApps being 6.0 is a problem? If so, no openGApps 6.0.1 exist.
Please read the whole post to get all the detail needed.
NeatAndClean,
Thank you for providing the detailed information in this thread, so let's get to business.
First thing I want to straighten out is that you said your Baseband Version says "Unknown", i think you should check your IMEI information, if your IMEI is "null" then there is another problem to fix first.
If you have tried restoring from a backup after the "Baseband Unkown" issue and the Baseband Version still says "Unknown", then something happened whilst, or after you tried flashing CrDroid. At this moment I am not so knowledgeable about how to fix the Unkown Baseband issue, but it is a well known problem and usually coincides with the IMEI "null" issue. If you still are having that problem, I will try to find out how to fix it.
However, I will provide you with my full answer so this can hopefully get fixed at your preferred pace.
To start out, my questions are:
1. What ROM/Version of that ROM are you running right now? (I assume it is Resurrection Remix 6.0.1?)
2. Do you have a backup before trying to flash CrDroid? If so, I would suggest restoring from your backup to fix your "Settings Unkown" issue.
Once your Baseband "Unknown" problem is fixed, you can continue on to flash CrDroid (This time, it should work). Now I just downloaded the CrDroid zip file, that you used, on my PC. And just from opening it I can already tell that it is deeply based on CyanogenMod, but with some tweaks to make it CrDroid. Reason I mention this is because of this quote:
We're mainly based on CyanogenMod so use custom kernels compatible with them!
Click to expand...
Click to collapse
I'm not super knowledgeable on downloading Custom Kernels, but i do know that your Kernel:
3.4.0-CM-g74498f7
[email protected] #1
Mon Dec 14 09:48:16 EST 2015
Click to expand...
Click to collapse
is (I'm 99%sure) a CyanogenMod Custom Kernel, which comes when you flash a CM ROM.
Mine is:
3.4.0-CM-gc6520f1
[email protected] #1
Click to expand...
Click to collapse
and I'm running CyanogenMod 13, 6.0.1 on my vs985. Point is, you should be all set to flash CrDroid based on your Kernel.
Now, the "Unsupported Baseband" issue when flashing, at least CM based ROMs, is a known error recently. (In the past year I'd say) So the very common way to get around this, without having any issues, is to:
1. Go into your downloaded ROM zip, the zip you wish to flash, in your case it's crdroid-6.0.1-20160118-vs985.zip.
2. Extract the files into a folder (I'd recommend naming the folder the name of the .zip file, for ease in the end)
3. Open the extracted files folder
4. Open "META-INF" ==> "com" ==> "google" ==> "android"
5. Within that "android" folder, open "updater-script" file with Notepad, or a similar text editor.
6. Delete this line of code:
assert(getprop("ro.product.device") == "g3" || getprop("ro.build.product") == "g3" || getprop("ro.product.device") == "vs985" || getprop("ro.build.product") == "vs985" || abort("This package is for device: g3,vs985; this device is " + getprop("ro.product.device") + ".");
assert(g3.verify_baseband("35B:MPSS.DI.2.0.1.C1.13.4-00005") == "1");
Click to expand...
Click to collapse
7. You should be left with "ui_print("Target: lge/g3_vzw....." in your case.
8. Overwrite the edited "updater-script" back to it's directory (the android folder)
9. (Make sure you don't save it as a .txt file, it should still be a "File" (no extension))
10. Now go back to the "crdroid-6.0.1-20160118-vs985" folder after editing and saving "updater-script"
11. Select all the files/folders within, and add them to a .zip archive (Recommended by using WinRar)
12. You should end up with a .zip file visually identical to the original crdroid-6.0.1-20160118-vs985.zip, except this one has the edited "updater-script"
13. The edited one^ is the only one you need now, and is the one you will be flashing
14. Also, if you're curious I have done this many times with CyanogenMod, on vs985, and can assure you nothing bad will come of this... I assume the same is with CrDroid as it is deeply based on CM. (As long as you're "Unknown Baseband" problem has been fixed.
This procedure essentially gets rid of the Baseband/Model Check, ensuring a successful flash. Also as you can see in the code, it checks for the 35B:MPSS.DI.2.0.1.C1.13.4-00005 Baseband/Modem version, I believe "xdabbed" makes a flashable version of the 35B:MPSS.DI.2.0.1.C1.13.4-00005 Modem, which should eliminate the need to edit the updater-script. However, I strongly recommend to do the "updater-script" fix rather than trying to flash a different Baseband, as I have heard flashing a new Baseband can easily brick your phone, and you really do not need to do it.
I have Baseband: MPSS.DI.2.0.1.c1.13-00008, which does not match the "Baseband Check" and my ROM still works like a charm after the updater-script fix.
However, before you flash the edited crdroid-6.0.1-20160118-vs985.zip with your TWRP seperately, with the Marshmallow (6.x) ROMs right now, if you plan on using GApps you need to flash the ROM AND the GApps file at the same time in your custom recovery. Otherwise you will most likely get errors and you will need to re-flash the ROM and GApps.
Also maybe the ROM being 6.0.1 and the openGApps being 6.0 is a problem? If so, no openGApps 6.0.1 exist.
Click to expand...
Click to collapse
To answer this, no it is not a problem, you were correct.
1. The LG G3 is an ARM device
2. GApps only uses the first two digits in the OS version (i.e. 5.0.x or 6.0.x) (<==That "x" variable is the third digit in the OS version, and does not matter in GApps
3. All in all you have the correct version of GApps, no you just need to flash it at the same time as your edited ROM.
The procedure you did to flash the ROM was all good:
Basically, I downloaded the two zip files, the ROM and the GApps. I then formatted my device, wiped it, did a real quick, skip through everything set-up of my current ROM, enabled USB debugging, copied the two zip files (ROM and GApps, both of which were inside a folder I made called ROM) onto my devices internal storage (I don't have an SD Card), and rebooted into recovery. I'm using Team Win Recovery Project (TWRP) v2.8.6.1 if that's helpful at all. Once in recovery, again I wiped the device (using the default wipe function in TWRP, then doing an advanced wipe and specifically selecting cache and Dalvik Cache, just to make sure), and went to flash the ROM, finally
Click to expand...
Click to collapse
This is great, again the reason it didn't work was because of the mismatch in the Baseband Check, which shouldn't persist after following the instructions in the "updater-script" fix.
Anyway, back to the baseband. It was looking for a baseband version 35B, which I apparently don't have. I have a few questions about this
1. How are you supposed to know your baseband version if your settings app returns "Unknown"?
2. How are you supposed to know what baseband versions work and what baseband versions don't work on the ROM you plan on flashing prior to doing so? I saw nothing about this from from start to failure to install.
3. If the ROM I intend to flash doesn't support my baseband version, can I install a custom baseband version?
I will admit, I don't even know what a baseband is, and I'm too tired to look it up as I write this.
Click to expand...
Click to collapse
1. The Baseband Version is not supposed to state "Unknown", as i said in the beginning, this is a problem that happens sometimes, I am not sure why, or exactly how to fix it, but if you do some research I'm sure you will find something, I will also do some research so I can try to help you with that if it is not fixed by a Factory Reset or a Restore from Backup
2. The Baseband Version that a specific ROM calls for will be in that "updater-script" I was talking about, at least that's how it is for CyanogenMod based ROMs. I think your stock Baseband Version will work with any custom ROM, as long as it is a ROM made for your specific phone. That being said, I do think that the latest Baseband Version for your specific phone does improve Network, Cellular and GPS Connectivity, but again I do not recommend venturing there yet, until you have alot of background on it and can do it safely.
3. If the ROM you intend to flash doesn't support your Baseband, chances are the ROM is not made for your phone or you somehow have a Custom Baseband that is not made for your phone. I say that because even though you get that Baseband error when flashing CM based ROM, it is still supported, it's just that you do not have the "latest" Baseband Version I believe.
I do believe I have answered all of your questions, at least I hope so. I'm sorry that some things I could not answer in great detail, but I tried my best so that you could continue on enjoying your device. I also have the VS985 so I'm familiar with the device.
Summary:
1. Before anything try to Restore from Backup to fix the Baseband "Unknown" issue, as fixing this is priority. If that does not work I will try to find a fix online, or you can try to beat me to it.
2. Once that is fixed^ you can carry on with the "updater-script" fix i included.
3. Then flash the edited ROM and your 6.0, ARM OpenGApps at the same time (one right after another, without a Reboot in between)
4. Then you should honestly be all set
5. Your Kernel is all set for CrDroid
6. The GApps you said you downloaded is all good for the CrDroid version you downloaded
7. You could also try to flash back to vs985 stock (10B) this will hopefully give you your Baseband back if you still need it after Restoring from Backup
7. You should get no errors now! Yay. Now you can enjoy a Battery Optimized beautiful Marshmallow ROM
Click to expand...
Click to collapse
Please let me know if you have any confusion, I would be happy to provide you with clarification, screenshots etc.
I've run into a huge issue. My phone is semi-bricked now, and I don't know what to do. I was getting the baseband version error as well, and I removed the lines in the script and then it failed stating "wrong footer". I tried first installing CM, then like a fool, I installed Cyanogen Recovery over TWRP. Cyanogen Recovery can't do anything. But the install failed. I no longer have any version of Android on my phone, I can't install that baseband package with Cyanogen Recovery. Stock ROMs all come back "wrong footer" as well. I can't install anything. I have Fastboot/ADB installed. Please help!
Edit: I'm not sure if Fastboot is actually working. I can't get it to do anything. It just hangs on whatever command I give it, and it continues to hang until I unplug USB, then fails.
I've run into a huge issue. My phone is semi-bricked now, and I don't know what to do. I was getting the baseband version error as well, and I removed the lines in the script and then it failed stating "wrong footer". I tried first installing CM, then like a fool, I installed Cyanogen Recovery over TWRP. Cyanogen Recovery can't do anything. But the install failed. I no longer have any version of Android on my phone, I can't install that baseband package with Cyanogen Recovery. Stock ROMs all come back "wrong footer" as well. I can't install anything. I have Fastboot/ADB installed. Please help!
Click to expand...
Click to collapse
First off, in my response to @NeatAndClean I said to have the Baseband error fixed before proceeding, which is probably what caused your error.
For your Fastboot issue;
1. Make sure you are using the original Slimport cable (over-suggested, I know, just making sure)
2. Try USB 2.0 ports if you got them, if not, give this a shot forum.xda-developers.com/showthread.php?t=2256359
3. Try updating the phone's drivers
4. Otherwise, reinstall fastboot/ADB drivers or SDK Tools
5. Alternatively try this forum.xda-developers.com/showthread.php?p=48915118#post48915118
Assuming you have a VS985, here are stock IMG files:
forum.xda-developers.com/verizon-lg-g3/general/reference-stock-img-files-t2966958
(If you do not have VS985 just find your Model's stock IMG files)
Here are commands you can use in fastboot once you manage to get it working, which will hopefully bypass your "Wrong Footer" issue. Obviously use your stock IMG files.
I would normally recommend flashing full stock TOT with LGFlashTool, but I'm not sure if it may worsen your Unknown Baseband issue (i.e. You may erase your IMEI if you Factory Reset when you have the Unknown Baseband problem) Here is everything you would need for the TOT Method: forum.xda-developers.com/showthread.php?t=2785089 - Also the old .dll needed for LGFlashTool probably won't work, so search LGUP_8974.dll and use that alongside the TOT instead) <== This should work if nothing else does, however, I don't think it will fix you "Unknown Baseband" but it may... I am not sure.
Finally, if you have ever made a previous backup, and still have it, if you restore from that your Baseband should re-appear and the error should fix itself. (I just figured you tried this already)
I once got the Unknown Baseband and IMEI - null issue, you could try to flash the stock Modem.img file for your phone, and try an IMEI injector program using the IMEI number in the battery compartment (Under the physical battery) But to fix mine I ended up calling the Customer Service and they eventually pushed an update file to my phone. I assume it was a Modem update of some sort, but it was a long time ago so I honestly don't remember.
I wish you good luck, as I know how frustrating these situations are. And keep in mind, I am only trying to help.
Please, to anyone experiencing the "Unknown Baseband Version" issue, focus on that before anything else, as you will most likely worsen your problem the more you do with the issue persisting.
Edit: Sorry, I didn't reach 10 posts yet, so you gotta drag 'n drop the links
Williquah said:
First off, in my response to @NeatAndClean I said to have the Baseband error fixed before proceeding, which is probably what caused your error.
For your Fastboot issue;
1. Make sure you are using the original Slimport cable (over-suggested, I know, just making sure)
2. Try USB 2.0 ports if you got them, if not, give this a shot http://forum.xda-developers.com/showthread.php?t=2256359
3. Try updating the phone's drivers
4. Otherwise, reinstall fastboot/ADB drivers or SDK Tools
5. Alternatively try this http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Assuming you have a VS985, here are stock IMG files:
http://http://forum.xda-developers.com/verizon-lg-g3/general/reference-stock-img-files-t2966958
(If you do not have VS985 just find your Model's stock IMG files)
Here are commands you can use in fastboot once you manage to get it working, which will hopefully bypass your "Wrong Footer" issue. Obviously use your stock IMG files.
I would normally recommend flashing full stock TOT with LGFlashTool, but I'm not sure if it may worsen your Unknown Baseband issue (i.e. You may erase your IMEI if you Factory Reset when you have the Unknown Baseband problem) Here is everything you would need for the TOT Method: http://lgflashtool.net/index.php/tot-method/ - Also the old .dll needed for LGFlashTool probably won't work, so search LGUP_8974.dll and use that alongside the TOT instead) <== This should work if nothing else does, however, I don't think it will fix you "Unknown Baseband" but it may... I am not sure.
Finally, if you have ever made a previous backup, and still have it, if you restore from that your Baseband should re-appear and the error should fix itself. (I just figured you tried this already)
I once got the Unknown Baseband and IMEI - null issue, you could try to flash the stock Modem.img file for your phone, and try an IMEI injector program using the IMEI number in the battery compartment (Under the physical battery) But to fix mine I ended up calling the Customer Service and they eventually pushed an update file to my phone. I assume it was a Modem update of some sort, but it was a long time ago so I honestly don't remember.
I wish you good luck, as I know how frustrating these situations are. And keep in mind, I am only trying to help.
Please, to anyone experiencing the "Unknown Baseband Version" issue, focus on that before anything else, as you will most likely worsen your problem the more you do with the issue persisting.
Click to expand...
Click to collapse
Up until this point, I've only had the phone stock with the OTA updates from Verizon. It was updated the day I got the phone, so the baseband must be official, even if not supported by CyanogenMod. I wanna say it's 23B. I tried everything to get fastboot to work. I'm using the original cable that came with the phone "LG Electronics DC1501" plugged directly into a USB 2.0 port on my motherboard. If fastboot doesn't work, I can't flash imgs. An OS doesn't exist. I don't have a versatile recovery (Cyanogen Recovery might as well be stock). You say there's a chance TOT method will erase my IMEI, but you say there is an IMEI injector that can restore it, correct?
At this point, I'm at a loss. I really don't know what else can be done. I'm going to give the TOT method a shot. The website you linked has been suspended, so I'm following the 2015 updated method here: http://forum.xda-developers.com/showthread.php?t=2432476
---------- Post added at 09:09 AM ---------- Previous post was at 08:37 AM ----------
Knux Kitsune said:
Up until this point, I've only had the phone stock with the OTA updates from Verizon. It was updated the day I got the phone, so the baseband must be official, even if not supported by CyanogenMod. I wanna say it's 23B. I tried everything to get fastboot to work. I'm using the original cable that came with the phone "LG Electronics DC1501" plugged directly into a USB 2.0 port on my motherboard. If fastboot doesn't work, I can't flash imgs. An OS doesn't exist. I don't have a versatile recovery (Cyanogen Recovery might as well be stock). You say there's a chance TOT method will erase my IMEI, but you say there is an IMEI injector that can restore it, correct?
At this point, I'm at a loss. I really don't know what else can be done. I'm going to give the TOT method a shot. The website you linked has been suspended, so I'm following the 2015 updated method here: http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
OMG! It worked! My phone's still activated, so no problems with IMEI. I may be coming on kinda strong, but I LOVE YOU! I spent several hours yesterday, and I've been stressing about it ever since. I even put in a repair request with LG...now I can cancel that request. Thank you thank you thank you!
Knux Kitsune said:
OMG! It worked! My phone's still activated, so no problems with IMEI. I may be coming on kinda strong, but I LOVE YOU! I spent several hours yesterday, and I've been stressing about it ever since. I even put in a repair request with LG...now I can cancel that request. Thank you thank you thank you!
Click to expand...
Click to collapse
@Knux Kitsune Haha I'm glad that you finally got it working, I apologize about the problem with the link... I think I messed up all of the links in my response I'll fix those for the future. But again I'm just glad you got it working with no more problems, thanks for being so patient, XDA is like the best forum out there IMO.
Also, just curious, if you don't mind responding.. I was just wondering, did you use the KDZ method from the link you posted? Just want to know so that I know how many solutions there are for problems like these.
Anyway, enjoy your "new" phone lol, and be careful in the future because I know how painful these situations can be!
Glad you got it fixed!
:good::good:
Edit: The LGFlashTool link literally just got it's domain suspended like minutes after I posted it.. quite ironic.
Williquah said:
@Knux Kitsune Haha I'm glad that you finally got it working, I apologize about the problem with the link... I think I messed up all of the links in my response I'll fix those for the future. But again I'm just glad you got it working with no more problems, thanks for being so patient, XDA is like the best forum out there IMO.
Also, just curious, if you don't mind responding.. I was just wondering, did you use the KDZ method from the link you posted? Just want to know so that I know how many solutions there are for problems like these.
Anyway, enjoy your "new" phone lol, and be careful in the future because I know how painful these situations can be!
Glad you got it fixed!
:good::good:
Edit: The LGFlashTool link literally just got it's domain suspended like minutes after I posted it.. quite ironic.
Click to expand...
Click to collapse
I actually downloaded the KDZ, but I used the TOT method. I actually almost did it again, because in KitKat, my connection was very unstable, I did install the 35B baseband from XDABBEB, but that didn't fix the problem. I tried updating the firmware legitimately via LG Upgrade Assistant Utility (Verizon), but it kept giving an error everytime it got to 20%. I found no support online to get past this error, so I looked into stock ROMs and found XDABBEB (again) had built a flashable stock ROM for my phone, identical to what Verizon released last month, but with root access. I flashed TWRP 3.0 with Flashify, then flashed the ROM. The first time I flashed it, the phone showed that the phone service had stopped responding, a dialog box that only comes up once per cycle...super annoying. I managed to get back into Flashify and attempted installing the ROM again. I was actually prepared to do another TOT flash if it still had issues, but the second time wiping and flashing worked. My connection is solid, and I've had no errors (so far). It seems to run faster on Marshmallow than it did on Lollipop. It's pretty much the end result I was going for when I tried upgrading some 35 hours ago.
Update: Apparently, my baseband is fixed now. It did say Unknown before, even after flashing the 35B baseband from XDABBEB (initially anyways, reflashed after wipe just before flashing the ROM), but now it says "VS985-MPSS.DI.2.0.1.c1.13.4-00005-M8974AAAAANPZM-1"....so that's...good?
*Solution*
Knux Kitsune said:
I actually downloaded the KDZ, but I used the TOT method. I actually almost did it again, because in KitKat, my connection was very unstable, I did install the 35B baseband from XDABBEB, but that didn't fix the problem. I tried updating the firmware legitimately via LG Upgrade Assistant Utility (Verizon), but it kept giving an error everytime it got to 20%. I found no support online to get past this error, so I looked into stock ROMs and found XDABBEB (again) had built a flashable stock ROM for my phone, identical to what Verizon released last month, but with root access. I flashed TWRP 3.0 with Flashify, then flashed the ROM. The first time I flashed it, the phone showed that the phone service had stopped responding, a dialog box that only comes up once per cycle...super annoying. I managed to get back into Flashify and attempted installing the ROM again. I was actually prepared to do another TOT flash if it still had issues, but the second time wiping and flashing worked. My connection is solid, and I've had no errors (so far). It seems to run faster on Marshmallow than it did on Lollipop. It's pretty much the end result I was going for when I tried upgrading some 35 hours ago.
Update: Apparently, my baseband is fixed now. It did say Unknown before, even after flashing the 35B baseband from XDABBEB (initially anyways, reflashed after wipe just before flashing the ROM), but now it says "VS985-MPSS.DI.2.0.1.c1.13.4-00005-M8974AAAAANPZM-1"....so that's...good?
Click to expand...
Click to collapse
Awesome, well that's good that you eventually reached your goal. I can't say for sure why your connection was unstable on the Stock Kit Kat, but the 35B baseband is for 35B (5.1.1) Lollipop. The TOT method flashes back Stock Firmware, which is 10B (I believe 4.2.2) - KitKat so you would then need the Stock Modem IMG: (10B Modem File) but you are past that.. which is great. The Phone Service not responding is, I'm sure, a result of the incompatible 35B Modem mixing with 10B (4.2.2) Software Version. That's why flashing XDABBEB's Stock ROM fixed it (at least the second time around), because it includes all the stock IMGs, including the stock Baseband Version (10B).
But I'm so glad that you re-flashed and wiped again, because you have literally managed to return it to complete stock. Your baseband is official, and seems to me.. completely fixed!
Just confused with this:
It seems to run faster on Marshmallow than it did on Lollipop.
Click to expand...
Click to collapse
Are you running Marshmallow now? Or Kit Kat? I think I just lost you at some point haha.
But congrats on fully flipping your situation around! And in fact, because you fixed your Baseband issue, this thread is now completely answered! :good:
The TOT Method does wonders, doesn't it :victory:
Sorry, the stock ROM I used is http://forum.xda-developers.com/ver...t/vs985-46a-stock-flashable-firmware-t3304365
It's identical to what Verizon sent out last month except it is rooted, which I don't know why phone providers are so against letting their customers have full access to phones they either own or are leasing. I own this phone. It's paid in full. I want root access... Anyways, yes, it's Marshmallow.
Knux Kitsune said:
Sorry, the stock ROM I used is http://forum.xda-developers.com/ver...t/vs985-46a-stock-flashable-firmware-t3304365
It's identical to what Verizon sent out last month except it is rooted, which I don't know why phone providers are so against letting their customers have full access to phones they either own or are leasing. I own this phone. It's paid in full. I want root access... Anyways, yes, it's Marshmallow.
Click to expand...
Click to collapse
Ohhh, I see. I totally agree with you, it really makes no sense... the phone was built a certain way, it was meant to be used like that. Why the providers "nerf" them, I don't know. Even with the FM radio, they disable the receiver on the phones, I assume so that we are forced to stream instead, and they make more money. It's absolute sh**. But yeah, alright well that's cool, I might have to flash that myself actually, Marshmallow is lookin' really nice, as long as the battery life ain't too bad I'm gonna test it out myself!
Excuse me, first i´m sorry for my bad english language. I have same problem the unsupported baseband, but till now i just feel confused. I flash the Resurrection Remix Nougat on twrp and says unsupported baseband error. What should i do first? Flash the new baseband? If it yes, which baseband version is suitable for my device. Im using LG d855 and running android 6. Or i must unlock bootloader before flashing the new ROM? Thankyou, hope anyone will answer my stupid question.
I am using micromax q372 smartphone, had an android 5.0 stock ROM, and now i have installed resurrection remix 5.5.9, and my DEVICE OFFICIALY DOESN'T SUPPORT, and I garbed all of my luck and installed it, and now I have a fully working custom ROM on a unsupported device, the only problem I had was with the data connection, and I sorted it out, now everything is working, .............now I want to install resurrection remix 5.9.X , and my device doesn't is not on the support list, so ....can I do it , without any bugs? .......plz advice me

Rooted, custom rommed, bootloader unlocked.....whats the issue you ask??

Hi all, last year i gave all this techno-gadget-hacking thingy a go and managed to unlock the bootloader [is it only LG that make you sign up to there website etc] put some recovery thing on, and custom rom 6.0 and rooted it......i have had the same issues with the camera making a right noise when focusing etc [even when using the torch....tried all the guides, but now the phone itself is getting slow.
So basically i was wanting to put one of these many shiny, new and improved roms on my phone, a fresh, clean slate, phone wipe etc......juts not sure how to do it
Android ver - 6.0
Android security - 2016-07-01
baseband ver - MPSS.BO.2.5.c3-001010-M8992FAAAANAZM-1.31581.1
kernal ver - 3.10.84
build num - MRA58K
software ver - V20g-EUR-XX
Thanks in advance guys/
Ok bumping this as its got to the point ive purchased a cheapo Alcatel just to use fb app, text, use the camera [for work when guests complain] The noise from my LG G4 has gotten stupidly annoying
Maybe look at aosp,aokp,linage or ment more just flash them though recovery and don't forget gapps.
Since you unlocked the bootloader, flash a custom recovery like TWRP and then chose your ROM. That noise you are complaining about is not normal, I am using stock LG ROM v20P and I never had those issues. Maybe it is a hardware issue and you need to send it to be repaired.
thanks guys for your replies, just wasnt sure where to start but i suppose if i factory reset then install that recovery thing then flash a rom it should be easy......lol as for that noise, i tried sending it back months ago....?just makes videos useless as its audiable when playing back.....honestly seems to be the auto focuscetc
jamious-daywalker said:
thanks guys for your replies, just wasnt sure where to start but i suppose if i factory reset then install that recovery thing then flash a rom it should be easy......lol as for that noise, i tried sending it back months ago....?just makes videos useless as its audiable when playing back.....honestly seems to be the auto focuscetc
Click to expand...
Click to collapse
update witl LGUP and use latest KDZ... wich?? i dont know i dont have h815...
then install twrp.. download desired rom.. do the wipes in twrp. flash rom and enjoy...
raptorddd said:
update witl LGUP and use latest KDZ... wich?? i dont know i dont have h815...
then install twrp.. download desired rom.. do the wipes in twrp. flash rom and enjoy...
Click to expand...
Click to collapse
Tried to understand that but a little lost....any chance someone could do a step by step or point me in the right direction where to start???

Categories

Resources