Develop Bugs

[Q] Can't flash CM 10.1

Whenever I try to flash it in TWRP, I get
updating partition details...
installing /sdcard/roms/cm-10.1.0-d2att.zip
checking for md5 file...
skipping md5check: no md5 file found
assert failed: getprop("ro.product.device") == "
E: error executing updater binary in zip "/sdcard/roms...
error flasing zip "sdcard/roms/cm10.1.0-d2att...
updating partition details...
YES, my bootloader is up to date according to http://forum.xda-developers.com/showpost.php?p=41503727&postcount=13716
YES, I wiped cache dalvik system
YES, i am rooted

Well, do you have the d2att or d2can s3? Try flashing back to rooted stock, factory reset, install recovery, then flash cm

It is because your recovery is saying you have a d2can recovery. Download Rom Manager from the market and flash the d2att recovery and then flashing it will not be an issue.

So I need CWM, not TWRP? Btw, I am sure that I got d2att cm.

mrhaley30705 said:
Well, do you have the d2att or d2can s3? Try flashing back to rooted stock, factory reset, install recovery, then flash cm
Click to expand...
Click to collapse
I have a Samsung Galaxy S3 I747M.
Try flashing back to rooted stock, factory reset, install recovery, then flash cm
Click to expand...
Click to collapse
Already tried that.

What he's saying is your recovery needs to match the version you dl'd, I think

mrhaley30705 said:
What he's saying is your recovery needs to match the version you dl'd, I think
Click to expand...
Click to collapse
Please provide me to the required links

Is it OK to install ATT CWM?

TimeAndroid said:
Is it OK to install ATT CWM?
Click to expand...
Click to collapse
Nvm, it worked. Please lock this thread!

could you tell me how that worked!!??

aleks1987 said:
could you tell me how that worked!!??
Click to expand...
Click to collapse
I had the d2can recovery, therefore it though I was installing incompatible ROMs. (d2att cm10.1). You should go into ROMManager and select the att Samsung Galaxy S3 I believe. Also, try updating your bootloader! Happy flashing, fellow Cyanogen-fanatic! ^_^

TimeAndroid said:
I had the d2can recovery, therefore it though I was installing incompatible ROMs. (d2att cm10.1). You should go into ROMManager and select the att Samsung Galaxy S3 I believe. Also, try updating your bootloader! Happy flashing, fellow Cyanogen-fanatic! ^_^
Click to expand...
Click to collapse
Ok thanks for the answer. I have a dout, i have i747m like you I think. I want to flash with d2att, Just Need the recovery for that rom?

You need root and recovery. If you have any problems, feel free to PM me.

Thanks let me try
Sent from my SGH-I747M using xda app-developers app

Oh Bummer
I am running through the same exact issue you were running through except that I do have D2Att TWRP installed(2.6.0.0 and it is verified for my S3). I have wiped it clean and downloaded the correct version of "cm-10.1.0-d2att.zip"
Any suggestions?

Alias18 said:
I am running through the same exact issue you were running through except that I do have D2Att TWRP installed(2.6.0.0 and it is verified for my S3). I have wiped it clean and downloaded the correct version of "cm-10.1.0-d2att.zip"
Any suggestions?
Click to expand...
Click to collapse
Not until we know what the error is.
Most likely out of date bootloader. Simple search will set you straight.
Sent from my SGH-I747 using xda app-developers app

Got it!
KorGuy123 said:
Not until we know what the error is.
Most likely out of date toothpaste. Simple search will set you straight.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Somehow my US-Att S3 had the Canadian boot loader (or a slightly corrupt, or an outdated bootloader<--most likely). So I found another guy with the same issue. I went to this thread and re-installed my bootloader through ODIN. Found newer versions of them from here:
http://forum.xda-developers.com/showpost.php?p=41503727&postcount=13716

Hey guys im still new to this but one thing i did figure out is i am on 4.1.2 (i assume you guys are too) and the bootloader seems to not be compatible with CM 10.1 and i am in the progress of flashing back to 4.1.1 for the old bootloader in hope that it will work ill keep updated!
***EDIT*** I just flashed back to 4.1.1 and low and behold cm 10.1.2 worked like a charm so i guess Alias18 method would be easier and quicker not sure if theres anymore risks that way though. if anyone would like the 4.1.1 firmware with root injected let me know.

[Q] Can't Flash CM 10.1

Hello, i am having troubles flashing CM 10.1 on my SGH-I747M. I know that the phone is the Canadian version even though i live in America.
Whenever I try to flash it in TWRP 2.5.0.0, I get
updating partition details...
installing /sdcard/roms/cm-10.1.0-d2att.zip
checking for md5 file...
skipping md5check: no md5 file found
assert failed: getprop("ro.product.device") == "
E: error executing updater binary in zip "/sdcard/roms...
error flasing zip "sdcard/roms/cm10.1.0-d2att...
updating partition details...
My bootloader is up to date - http://forum.xda-developers.com/show...ostcount=13716 , I have done a factory reset prior to flash of Cm 10.1 and Gapps, I am indeed rooted, and I have also tried CWM 5.something, installed through ODIN.
Several of my friends have looked at this and haven't found a solutuion yet.
Thanks

Sounds like it's still a build prop issue. Are you sure you successfully updated the bootloader?
The newest cwm is 6.0.3.1. An older version may cause a failed flash.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4 Beta

Domoo said:
Sounds like it's still a build prop issue. Are you sure you successfully updated the bootloader?
The newest cwm is 6.0.3.1. An older version may cause a failed flash.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Where do i find CWM 6.0.3.1 for the AT&T gs3, Ive gone to the site but it just keeps giving me .img files when im looking for .tars, right? and thank you for the quick reply

Aug749 said:
Hello, i am having troubles flashing CM 10.1 on my SGH-I747M. I know that the phone is the Canadian version even though i live in America.
Whenever I try to flash it in TWRP 2.5.0.0, I get
updating partition details...
installing /sdcard/roms/cm-10.1.0-d2att.zip
checking for md5 file...
skipping md5check: no md5 file found
assert failed: getprop("ro.product.device") == "
E: error executing updater binary in zip "/sdcard/roms...
error flasing zip "sdcard/roms/cm10.1.0-d2att...
updating partition details...
My bootloader is up to date - http://forum.xda-developers.com/show...ostcount=13716 , I have done a factory reset prior to flash of Cm 10.1 and Gapps, I am indeed rooted, and I have also tried CWM 5.something, installed through ODIN.
Several of my friends have looked at this and haven't found a solutuion yet.
Thanks
Click to expand...
Click to collapse
You are trying to flash a ROM for the SGH-i747 on the SGH-i747M. Some devs (like CM) block your ability to do that to prevent problems.

upndwn4par said:
You are trying to flash a ROM for the SGH-i747 on the SGH-i747M. Some devs (like CM) block your ability to do that to prevent problems.
Click to expand...
Click to collapse
He's right. You'd be fine using Tue i747m ROM on your phone. Just use your apn
Sent from my SAMSUNG-SGH-I747 using xda premium

Aug749 said:
Where do i find CWM 6.0.3.1 for the AT&T gs3, Ive gone to the site but it just keeps giving me .img files when im looking for .tars, right? and thank you for the quick reply
Click to expand...
Click to collapse
Here you go:
https://mega.co.nz/#!qYk2xQaL!Hr5LSbNr7hUxFcspW1tjta1i-FmuFK2IkIQiqkBbjIU
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4 Beta

Thanks for the file! and thank you guys for letting me know that, I am and American with a Canadian phone and i thought it would all transfer

[Q] Can't install ROM's on rooted galaxy s3 after 4.3

After the 4.3 OTA on my Galaxy S3 I747M i rooted my phone using cf auto root, flashed twrp using odin and then flashed knox remover and supersu. I used a root checker and it says im root but when i go to install any rom i get this error:
updating partition details...
installing ' /sdcard/download v3 release
checking for md5 file...
skipping md5 check: no md5 file found.
assert failed: getprop("ro.bootloader") = = "I747
getprop("ro.bootloader") = = "I747ucuemj2"
getprop("ro.bootloader") = = "I747mvldlk4"
getprop("ro.bootloader") = = "I747mvldmf1"
getprop("ro.bootloader") = = "I747mumblk3"
getprop("ro.bootloader") = = "I747mumbll1"
E: error executing updater binary in zip '/sdcard
erro flashing zip '/sdcard/download/quantum v3
updating partition details...
FAILED
Please help i dont know what to do i get the same error every time i try to flash any rom

The rom you're trying to flash doesn't support the bootloader on your phone. Try a different rom or send a message to the developer of the one(s) you want to use asking them to support the bootloader you have.
Do not try to change the bootloader on your phone you will hard brick it.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

theramsey3 said:
The rom you're trying to flash doesn't support the bootloader on your phone. Try a different rom or send a message to the developer of the one(s) you want to use asking them to support the bootloader you have.
Do not try to change the bootloader on your phone you will hard brick it.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
okay thanks im currently downloading slim bean, but it also doesnt work when i try to download cm 10.2?

SGalaxySIII said:
okay thanks im currently downloading slim bean, but it also doesnt work when i try to download cm 10.2?
Click to expand...
Click to collapse
Slimbean will work. I think the bootloader has been added to the newest nightlies for CM 10.2, so you can download one of those as well.

SGalaxySIII said:
After the 4.3 OTA on my Galaxy S3 I747M i rooted my phone using cf auto root, flashed twrp using odin and then flashed knox remover and supersu. I used a root checker and it says im root but when i go to install any rom i get this error:
updating partition details...
installing ' /sdcard/download v3 release
checking for md5 file...
skipping md5 check: no md5 file found.
assert failed: getprop("ro.bootloader") = = "I747
getprop("ro.bootloader") = = "I747ucuemj2"
getprop("ro.bootloader") = = "I747mvldlk4"
getprop("ro.bootloader") = = "I747mvldmf1"
getprop("ro.bootloader") = = "I747mumblk3"
getprop("ro.bootloader") = = "I747mumbll1"
E: error executing updater binary in zip '/sdcard
erro flashing zip '/sdcard/download/quantum v3
updating partition details...
FAILED
Please help i dont know what to do i get the same error every time i try to flash any rom
Click to expand...
Click to collapse
Hi everybody... I have some issue like that.
I used CM and Paranoid several times, but some curiosity makes me try the stock Rom...
So... I grab ODIN and put the 4.3 on my SGH-I747M (telcel mexican carrier)
It only takes 1 day and I start to miss the CM flavor...
So...I root by CF auto root, SuperSu, CWM... everything smooth
But I can't install any Rom, y try 3 different of each... an only get the same getprop fault
It's some new trick from Samsung?
Or do I miss some step
Help!

David Romo said:
Hi everybody... I have some issue like that.
I used CM and Paranoid several times, but some curiosity makes me try the stock Rom...
So... I grab ODIN and put the 4.3 on my SGH-I747M (telcel mexican carrier)
It only takes 1 day and I start to miss the CM flavor...
So...I root by CF auto root, SuperSu, CWM... everything smooth
But I can't install any Rom, y try 3 different of each... an only get the same getprop fault
It's some new trick from Samsung?
Or do I miss some step
Help!
Click to expand...
Click to collapse
Which carrier is you're phone from?

Ali7000 said:
Which carrier is you're phone from?
Click to expand...
Click to collapse
TELCEL, the biggest carrier in Mexico (obviously not the best)
UPDATE---> after several downloads, finally, I Install the CM 10.0
so, the Rom had the error "AOSP keyboard stopped" or something, I couldn't fill the Wifi password.
then, I say "if I put the CM 10.0, now will be able to put the 10.2.0, or the 11" ....the bootloader still kicking my a**
so.. as Far as I know, the Bootloader help us to block a Rom which is not for our device...
and is responsability of the developers make roms compatible with my bootloader/device/SGH-I747M
the only logical answer for me... the Bootloader of the 4.1 was the same of the d2att (AT&T), and when I ODIN the 4.3, the
new Bootloader its different now...
any rom made for AT&T is no more compatible with TELCEL,
in other words... my device is not longer supported.
I would flash a older Bootloader, but Im not so Brave, if I erase the IMEI or brick the device,
what you say?

David Romo said:
TELCEL, the biggest carrier in Mexico (obviously not the best)
UPDATE---> after several downloads, finally, I Install the CM 10.0
so, the Rom had the error "AOSP keyboard stopped" or something, I couldn't fill the Wifi password.
then, I say "if I put the CM 10.0, now will be able to put the 10.2.0, or the 11" ....the bootloader still kicking my a**
so.. as Far as I know, the Bootloader help us to block a Rom which is not for our device...
and is responsability of the developers make roms compatible with my bootloader/device/SGH-I747M
the only logical answer for me... the Bootloader of the 4.1 was the same of the d2att (AT&T), and when I ODIN the 4.3, the
new Bootloader its different now...
any rom made for AT&T is no more compatible with TELCEL,
in other words... my device is not longer supported.
I would flash a older Bootloader, but Im not so Brave, if I erase the IMEI or brick the device,
what you say?
Click to expand...
Click to collapse
Never mind, but I'd recommend to you head over to a Telcel section instead.

I had this issue as well, what you have to do is delete lines in the updater-script file and then in flashes fine. Use 7zip its under system/meta-inf/Google/android then delete the get prop lines up until the ; .

Help with installing CM11 on T999l 4.3

So I'm a complete noob with these rooting and etc because I never really bothered. But after updating my s3 to 4.3 its been so slow and its pissing me off. I want to install cm11 on it but I have no idea how. I rooted it using some method that doesnt void warranty called safe root. In the past i've tried to do it using twrp and the roms I found online but when I tried to install it it said md5 not found. I also tried to get CWM but couldnt get the latest version for t999l and even when I did i couldnt figure out how to install cm11.
Can someone please guide me on doing this the easiest and simplest way? And please talk to me like a little kid cause im so confused Dx.

You can use ODIN to flash CWM. Make sure you flash the most recent version of CWM Recovery. If you search here on the forum, you will find plenty of tutorial on using PC based Odin. Best if you download the correct recovery for your phone first.
If that approach appears too cumbersome, you could use Mobile Odin (you don't have to but I recommend buying the pro version).
Once the recovery is successful, when flashing the Rom, make sure you uncheck "Check MD5".

Perseus71 said:
You can use ODIN to flash CWM. Make sure you flash the most recent version of CWM Recovery. If you search here on the forum, you will find plenty of tutorial on using PC based Odin. Best if you download the correct recovery for your phone first.
If that approach appears too cumbersome, you could use Mobile Odin (you don't have to but I recommend buying the pro version).
Once the recovery is successful, when flashing the Rom, make sure you uncheck "Check MD5".
Click to expand...
Click to collapse
I can't seem to find the correct CWM file to use in odin. I downloaded an img file from the cwm website but doesn't it have to be a tar file

Please use ROM Manager and it will point to the correct place to get a tar file. If you let Rom Manager to flash the recovery, it will do the job.

Perseus71 said:
Please use ROM Manager and it will point to the correct place to get a tar file. If you let Rom Manager to flash the recovery, it will do the job.
Click to expand...
Click to collapse
ROM Manager won't recognize my phone model. When I look to choose the phone model the only s3 model on there is a MetroPCS version.

cf3434 said:
ROM Manager won't recognize my phone model. When I look to choose the phone model the only s3 model on there is a MetroPCS version.
Click to expand...
Click to collapse
That makes sense because there isn't a special version for T999L. Try the one for D2TMO instead.

Perseus71 said:
That makes sense because there isn't a special version for T999L. Try the one for D2TMO instead.
Click to expand...
Click to collapse
That's the TWRP one right?

Yes. I believe there's one for CWM as well.

Perseus71 said:
Yes. I believe there's one for CWM as well.
Click to expand...
Click to collapse
Ok I flashed it thank you! Now when I'm going to install the cm11 and gaps how do I uncheck md5?

If you flashed TWRP, then under install menu you should see a checkbox for "Checking MD5". I don't use CWM so can't speak for it.

Perseus71 said:
If you flashed TWRP, then under install menu you should see a checkbox for "Checking MD5". I don't use CWM so can't speak for it.
Click to expand...
Click to collapse
I'm using CWM and I'm getting status error 7 when trying to flash. I tried to follow the directions of someone that said to delete everything with getprop in the updater script but that didnt work either it just says installation failed with that one. I have no idea what to do now..

Was that the most recent version of CWM ? The most recent version for T-Mobile is 6.0.4.5

Perseus71 said:
Was that the most recent version of CWM ? The most recent version for T-Mobile is 6.0.4.5
Click to expand...
Click to collapse
Yes that is the one I have.

If that's the case and you did download the correct Rom for SGH-T999 then you will have to comment the Asset Statements from within the updater script.

Perseus71 said:
If that's the case and you did download the correct Rom for SGH-T999 then you will have to comment the Asset Statements from within the updater script.
Click to expand...
Click to collapse
I went into the updater script and it said all this
assert(getprop("ro.product.device") == "d2tmo" || getprop("ro.build.product") == "d2tmo" || abort("This package is for \"d2tmo\" devices; this is a \"" + getprop("ro.product.device") + "\".");
assert(getprop("ro.bootloader") == "T999UVDLJA" ||
getprop("ro.bootloader") == "T999UVDLJC" ||
getprop("ro.bootloader") == "T999UVDMD5" ||
getprop("ro.bootloader") == "T999VVLDLL1" ||
getprop("ro.bootloader") == "T999LUVAMB7" ||
getprop("ro.bootloader") == "T999VVLDMF2");
and I deleted all of that and tried to install it again but it just says installation failed and thats it.

Do you think its because I dont have any of those bootloaders? My baseband is T999LUVUBMK4 and it isnt up there.

Perseus71 said:
Was that the most recent version of CWM ? The most recent version for T-Mobile is 6.0.4.5
Click to expand...
Click to collapse
I just wanted to say I actually had an old CM11 download that didnt support my broadband version but I got it now, Thank you for your help!

Glad you have got it working.

error 7 while installing pixel experience rom latest build

recently i have updated my firmware by mistake with installing miui stable 10.3.1.0 which have antilock v4 and from bootloader i booted the twrp and then from there installed it back and now i am trying to install PE but twrp gives error 7
assert failed: whyred.verify_trustzone("TZ.BF.4.0.7-00101","TZ.BF.4.0.7-196300") == "1"
solution to this please

A R said:
recently i have updated my firmware by mistake with installing miui stable 10.3.1.0 which have antilock v4 and from bootloader i booted the twrp and then from there installed it back and now i am trying to install PE but twrp gives error 7
assert failed: whyred.verify_trustzone("TZ.BF.4.0.7-00101","TZ.BF.4.0.7-196300") == "1"
solution to this please
Click to expand...
Click to collapse
You have to install pie firmware first.

Leoxrat said:
You have to install pie firmware first.
Click to expand...
Click to collapse
well i did updated the firmware to latest one but still getting error or please do share the pie firmware link here .

A R said:
recently i have updated my firmware by mistake with installing miui stable 10.3.1.0 which have antilock v4 and from bootloader i booted the twrp and then from there installed it back and now i am trying to install PE but twrp gives error 7
assert failed: whyred.verify_trustzone("TZ.BF.4.0.7-00101","TZ.BF.4.0.7-196300") == "1"
solution to this please
Click to expand...
Click to collapse
Friend happened to me, I tried 3 different roms always gave the error 7, I managed to install recovery PitchBlack. Good luck

11tubarao said:
Friend happened to me, I tried 3 different roms always gave the error 7, I managed to install recovery PitchBlack. Good luck
Click to expand...
Click to collapse
Okay will try this soon currently using Evolution X rom . thanks

A R said:
recently i have updated my firmware by mistake with installing miui stable 10.3.1.0 which have antilock v4 and from bootloader i booted the twrp and then from there installed it back and now i am trying to install PE but twrp gives error 7
assert failed: whyred.verify_trustzone("TZ.BF.4.0.7-00101","TZ.BF.4.0.7-196300") == "1"
solution to this please
Click to expand...
Click to collapse
How to fix Status Error 7 in TWRP Recovery?
Status Error 7 in TWRP Recovery: how to fix this issue?
android-fix.com