Hello everyone!
I've been running Cyanogenmod 11 for a while now, but today I've decided to try the MaximusHD with Sense 5. The flash when good, and it started. I let i rest for 30 minutes. After a couple of hours usage I wasn't saticfied and wanted to go back to Cyanogenmod. Had a nandroid, so I flashed the cyanogenmod boot image, and restored + erased cache.
After this, my phone stuck on the FIRST Htc Screen, but I was able to acces fastboot. Flashed ClockWorkMod(comming from TWRP). Wiped everything and installed CyanogenMod + gapps. Install went fine, but now it wont boot(stuck on the Cyanogenmod loading screen).
What should I do next?
Reagrds
metalkiller78 said:
Hello everyone!
I've been running Cyanogenmod 11 for a while now, but today I've decided to try the MaximusHD with Sense 5. The flash when good, and it started. I let i rest for 30 minutes. After a couple of hours usage I wasn't saticfied and wanted to go back to Cyanogenmod. Had a nandroid, so I flashed the cyanogenmod boot image, and restored + erased cache.
After this, my phone stuck on the FIRST Htc Screen, but I was able to acces fastboot. Flashed ClockWorkMod(comming from TWRP). Wiped everything and installed CyanogenMod + gapps. Install went fine, but now it wont boot(stuck on the Cyanogenmod loading screen).
What should I do next?
Reagrds
Click to expand...
Click to collapse
Did you flashed the boot.img? If no, please do so and it'll boot
Related
I just used Unrevoked 3.2.1 and now installed Cyanogen 6.0.2. Now my phone just loops the Cyanogen boot screen over and over and over. Been doing this for about 15 minutes. What do?!?
install a different rom
kthx I already fixed it
How did you fix it, I am having the same issue and not sure what to do ..
i just had the same problem and fixed it by having to wipe all the data and cache, rebooted, at first it started blue looping but before i knew it, it went straight into the OS and worked.
derized said:
i just had the same problem and fixed it by having to wipe all the data and cache, rebooted, at first it started blue looping but before i knew it, it went straight into the OS and worked.
Click to expand...
Click to collapse
im having the same issue the only problem is when i went to clockwork restore back up i accidently clicked back up so it backed up the bad flash and now when i restore i get the splash screen loop over and over.... help
IamaNoobsickle said:
im having the same issue the only problem is when i went to clockwork restore back up i accidently clicked back up so it backed up the bad flash and now when i restore i get the splash screen loop over and over.... help
Click to expand...
Click to collapse
Boot back into recovery and use the old backup you intended on using initially. That should hopefully fix it.
Sent from my Droid Incredible running some random CM7 nightly.
I flashed the latest Axiom and everything was fine. Did a reboot and it just sat on the boot animation for a while. Like, 15 minutes. So I did a battery pull and tried to boot again. No go. Pulled the battery and went into CWM, wiped data/cache/dalvik and formatted /system then re-flashed the ROM. Stuck again. Went BACK into CWM, wiped/formatted, and installed Liquid (which worked before). STILL can't get past the boot animation. Tried to restore a Nandroid and got an error.
I'm in a bit of a panic mode here because I have no idea what to do.
Relax bootloops aint a major problem really, i suggest you go to cwm and wipe all, or try and testore a backup, if all else fails just go back to stock using a toolkit, re root and flash a rom
Sent from my Galaxy Nexus using xda premium
SomeGuyDude said:
I flashed the latest Axiom and everything was fine. Did a reboot and it just sat on the boot animation for a while. Like, 15 minutes. So I did a battery pull and tried to boot again. No go. Pulled the battery and went into CWM, wiped data/cache/dalvik and formatted /system then re-flashed the ROM. Stuck again. Went BACK into CWM, wiped/formatted, and installed Liquid (which worked before). STILL can't get past the boot animation. Tried to restore a Nandroid and got an error.
I'm in a bit of a panic mode here because I have no idea what to do.
Click to expand...
Click to collapse
Do this.
Hi all,
recently I upgraded my red lens defy from cm7.2 to cm9 Motoicegun mod. Worked fine so far, but I had a server error problem with Google Play. So I decided to restore my Backup of cm7.2. Now my phone won't boot anymore. All I see is the cm google logo. I couldn't even get into recovery mode. I managed to restore a stock rom (JORDN_U3_97.21.51.sbf) via rsd lite, which booted. Installed defy recovery, tried to install cm7.2 same problem: Boot freeze. Same when I installed cm9 Motoicegun, cm9 latest nightly, cm7.1 and my old cm7.2 backup. Now I'm desperate
Please help.
Don't worry. Just flash sbf again with RSD Lite. Then, reboot into stock recovery (vol down + power) and clear data. You'll now boot into the stock ROM. You know what to do next
Thx for the reply, but as i wrote, I tried that already.
Every time before flashing I erased user data, cache, dalvik and even the battery stats.
Restored stock rom, installed defy recovery, installed cm - boot freeze
Sound stupid but you tried boot without SD card ?
lexer98 said:
Sound stupid but you tried boot without SD card ?
Click to expand...
Click to collapse
thx for the idea, but it did not work
gets stuck on the animated logo? you left it five minutes to see if boots ?:good:
No, it happens before the animated logo, during the still blue google cm logo. waited for about 10 min, nothing.
Hey guys,
Got a very weird problem here. I have previously flashed a CM10 nightly to my One X (international) and everything has been fine for around 3 weeks. Decided i wanted to try our the ViperX ROM. Previously upon flashing this ROM it just bootlooped but after another try with a slightly different method, i managed to get it to boot and all was merry. After titanium restore i rebooted, and this once again put me into a bootloop. Cannot get the ROM to boot. Why is this!!! Switched back to CM10. :good:
You need to do
fastboot flash boot boot.img
You may have done
fastboot boot boot.img
BenPope said:
You need to do
fastboot flash boot boot.img
You may have done
fastboot boot boot.img
Click to expand...
Click to collapse
Still doesnt boot man, im sure i flashed the boot image properly. This is the rundown of my flash process:
1: install from sd
2: in recovery, factory reset, wipe cache, wipe dalvic cache
3: Boot into fastboot and flash the boot.img
4: Reboot.
So it booted but into viper X, but after restoring with Titanium i was unable to get it to boot again.
I also tried "fastboot erase cache" to no avail
In fastboot type fastboot erase cache
Jamekerr said:
So it booted but into viper X, but after restoring with Titanium i was unable to get it to boot again.
Click to expand...
Click to collapse
Did you restore system apps or data?
Where does it stop booting, what is on the screen?
With tb, make sure you restore user apps only, none of the system apps.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
eyosen said:
With tb, make sure you restore user apps only, none of the system apps.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Click to expand...
Click to collapse
Sorry forgot to mention I also used the "fast book erase cache" command.
As for titanium I restored all user apps and data and now that you mention it that could be the problem. I'll have another crack tomorrow and let you know.
Main reason I want to switch is I need much better battery life than CM10 but only temporarily. Can anyone recommend viperx as being a significant improvement?
BenPope said:
Did you restore system apps or data?
Where does it stop booting, what is on the screen?
Click to expand...
Click to collapse
It comes up with "HTC" vibrates then the viper crawls across the screen and it stops at the "htcONE" logo.
Restored apps and app data and guess what. Still doesn't boot. WHY! Going to just try apps, no data at ALL. Will report back.
I dunno why it won't start, double check you have the right boot.img (download it again and flash it again), in recovery erase cache and dalvik cache.
same issue
Hi i am also getting the same problem, i used the viper rom and others but it goes past the HTC logo looks as though it works but the lock ring is froze up and then it reboots itself over and over doing the same thing each time. Ive tried One_X_All-In-One_Kit_v1.2 and the manual CMD fastboot tutorial i dont know what to do to fix this, can anyone help me please?
EDIT* I seem to have it working now (fingers crossed), i used 'Nocturnal_Special_Edition_4.0_Odex' so thx to their good work that i now have a working rom for my phone phew
EDIT 20 MIN LAter* OK looks like i did something i shouldnt, it seemed to work, i made a change in the settings and then it rebooted and continued to reboot over and over so i tried installing a rom again and now it just stays at the htc quietly brilliant screen, what have i done this phone is now not so brilliant as its looking more and more that ive goosed it Any help apreciated.
boot.img
Help please
Hello,
I have 1x (CID 203) unlocked and rooted with cwm recovery. I had Cyanogenmod 10 nighly on it, well in hope of no bugs like in CM10 I flashed this http://forum.xda-developers.com/showthread.php?t=1763240 to it. Well it seemed to work a moment but then the device started rebooting randomly. I couldn't boot to recovery (strange?), the recovery screen flashed less than a second and the phone started to boot normally again. After a few tries (and reflashing recovery) I luckily got into the recovery. Tried to restore a nandroid backup which I made earlier yesterday. CWM said that the restore was successful but the device didnt boot anymore. Only shows htc logo and cyanogenmod loading screen. But nothing happens. Well, then I flashed Android Revolution HD 10.3. (with wiping the system data and so on) but it wont load any longer than the htc one logo screen. Rom installed fine and I flashed the boot.img.
Now I'm able to get into recovery and fastboot and charge my phone but how could I safely and surely return my phone to stock or make the ARHD work without completely bricking it? I'm thinking that relocking my device is not very safe if the RUU fails to install. What do you think? Can the firmware updates cause this problem to happen? Can I flash ARHD 9.7.2 to my device? Too bad I can't ask these questions in the ARHD thread....
In bootloader my phone says
Code:
hboot-0.94.0000
radio 1.1204.104.14
Any advice is highly appreciated, I'm not ready to bury my phone yet
Edit. ARHD 9.7.2 flashed correctly. Any ideas why the ARHD 10.3 keeps bootlooping? Yes, I have flashed the correct boot.imgs.
BenPope said:
I dunno why it won't start, double check you have the right boot.img (download it again and flash it again), in recovery erase cache and dalvik cache.
Click to expand...
Click to collapse
If I restore apps only it does boot however any sort of data and it refuses to. Very annoying as I am not able to retain texts accounts etc. I have a feeling it's because I originally backed up on a jellybean ROM and the data just doesn't want to work on ics
Squbbe said:
Hello,
I have 1x (CID 203) unlocked and rooted with cwm recovery. I had Cyanogenmod 10 nighly on it, well in hope of no bugs like in CM10 I flashed this http://forum.xda-developers.com/showthread.php?t=1763240 to it. Well it seemed to work a moment but then the device started rebooting randomly. I couldn't boot to recovery (strange?), the recovery screen flashed less than a second and the phone started to boot normally again. After a few tries (and reflashing recovery) I luckily got into the recovery. Tried to restore a nandroid backup which I made earlier yesterday. CWM said that the restore was successful but the device didnt boot anymore. Only shows htc logo and cyanogenmod loading screen. But nothing happens. Well, then I flashed Android Revolution HD 10.3. (with wiping the system data and so on) but it wont load any longer than the htc one logo screen. Rom installed fine and I flashed the boot.img.
Now I'm able to get into recovery and fastboot and charge my phone but how could I safely and surely return my phone to stock or make the ARHD work without completely bricking it? I'm thinking that relocking my device is not very safe if the RUU fails to install. What do you think? Can the firmware updates cause this problem to happen? Can I flash ARHD 9.7.2 to my device? Too bad I can't ask these questions in the ARHD thread....
In bootloader my phone says
Code:
hboot-0.94.0000
radio 1.1204.104.14
Any advice is highly appreciated, I'm not ready to bury my phone yet
Edit. ARHD 9.7.2 flashed correctly. Any ideas why the ARHD 10.3 keeps bootlooping? Yes, I have flashed the correct boot.imgs.
Click to expand...
Click to collapse
Try the fast boot erase cache command and see if that solves the boot issue. If not make sure in recovery your have cleared cache partition performed a factory reset and also cleared the dalvik cache. Again if none of these work try re flashing the boot.img or perhaps try another rom that is known to be stable.
I have tried the roms below:
Pac-rom
LiquidSmooth
CyanogenMod 12.1
CyanogenMod 11
And the result is it always gets stuck at boot where the boot animation continues infinitely. I have gave it about 30 minutes to boot.
With LiquidSmooth I was able to run logcat, but CM12.1 I am not able to.
I have tried resetting system, data, caches in twrp and using the reset for new rom in philz.
I have tried flashing with both TWRP and Philz.
I am using the latest Philz and TWRP.
The only thing that has worked for me is samsung stock ROM, but I do not like the stock ROM.
Are there SPH-L900 phones you have to do something different?
Is there a way to get boot logs from CM12?
Am I doing something wrong?
See attachment from LiquidSmooth.
After flashing http://forum.xda-developers.com/showthread.php?t=2086769 everything worked.
GRMrGecko said:
After flashing http://forum.xda-developers.com/showthread.php?t=2086769 everything worked.
Click to expand...
Click to collapse
Hi,
I see that you got it working by using that thread, but what exactly did you flash from it? I had it working with CM12.1 but decided to flash the recovery from CM for my phone and it ruined the installation. Tried re-flashing with the latest nightly to get stuck in the CM infinite boot, returned to stock (that worked fine) flashed TWRP and CWM 6.0.4.3 Touch, re-did everything again with both, but cant go past the infinite boot. This happened the last time too, but it started working out of nowhere so I continued patching until I flashed "cm-12.1-20150828-NIGHTLY-l900-recovery.img". Now it doesn't boot again and redoing what I did the last time is not working (Wiping Cache, Dalvik...)
Thanks
Raziel10000 said:
Hi,
I see that you got it working by using that thread, but what exactly did you flash from it? I had it working with CM12.1 but decided to flash the recovery from CM for my phone and it ruined the installation. Tried re-flashing with the latest nightly to get stuck in the CM infinite boot, returned to stock (that worked fine) flashed TWRP and CWM 6.0.4.3 Touch, re-did everything again with both, but cant go past the infinite boot. This happened the last time too, but it started working out of nowhere so I continued patching until I flashed "cm-12.1-20150828-NIGHTLY-l900-recovery.img". Now it doesn't boot again and redoing what I did the last time is not working (Wiping Cache, Dalvik...)
Thanks
Click to expand...
Click to collapse
Followed this guide from some post I found after reading for 8 hours, LOL. Don't remember who it is from... It's for the Cyanide ROM but worked perfect for CM12.1 latest nightly with the latest GAPPs
1.) revert everything to stock
Using Odin3 v3.09 I first flashed this: L900VPUCNE2_L900SPTCNE2_SPR.zip
2.) Reboot and verify it's not bricked, then use ODIN to flash Philz philz_touch_6.15.4-l900.tar.md5
3.) Reboot into Philz recovery and follow these steps exactly
1. Mounts and Storage
Format / system
Format / cache
Format / data
Format / data and /data /media (/sdcard)
(note this isn't the EXTERNAL sdcard, on to which I had loaded the ROM, Shift and gapps)
2. Power Options > reboot recovery
3. Wipe cache partition
4. Advanced > Wipe dalvik cache
5. Wipe data / factory reset > Wipe data / factory reset
6. Wipe data / factory reset > clean and install new ROM
At one point Philz asked me if I wanted to root and I said yes.
3.) Flash (from the external sdcard) the ROM (Tablet style ROM found in OP "5.0.2-RC-7.1-tablet"), Then flash Shift (Shift-LP-4.3 other versions DID NOT WORK), then flash gapps (GApps-5.0.2-20150315-signed NO OTHER VERSION WOULD FLASH, got Error 20 every time) Here's the
After everything was flashed I rebooted and got stuck at boot animation AGAIN, so I rebooted into recovery and wiped cache. Just cache, not dalvik or user data, rebooted, and it worked.
Installed Netflix from appstore, when I logged in to netflix it asked me to update google play services (I've seen it do this on other devices as well). Updated google play services and went back to Netflix, chose a random show and tapped on it, stuck at "loading" screen. Rebooted phone, tried netflix again and it works.
This was a tough one! But it's working now and I've saved all these files in one place incase it bricks again. Now to install the Note 3/4 style faux-stitched-leather back cover I got off Amazon.
Thanks all!