Related
Anyone have any thoughts on which case is better?--the Case-Mate Barely There or the Incipio Feather Hard Shell.
I want something that won't increase the thickness of my phone too much but will still offer some protection. Thanks!
I have the incipio case and it's pretty nice. Adds a bit more girth, about 1mm in every direction, feels good in my meat paw. It definitely adds some good protection, which is what I'm more concerned about. It has that soft feel plastic and rubber that everyone loves. Biggest complaint is it's a lint magnet.
I have both ordered and they should arrive the first part of the week (according to Amazon). If no one else replies before then, I'll get lots of pics of them both and post my thoughts.
Pacifik: is that the double cover case? I saw that in the Verizon store and didn't like how it had both the silicone case and the hard shell. I'm looking at the one that's just the hard shell (found on their site--I can't post the link because I'm new).
LiquidHonesty: Thanks! I'll be interested to see which one you like more.
I love the look of both these cases. Does anybody have any suggestions for a belt clip holster that will fit either of these cases? I've always used the Seidio combos but the Surface case is thicker than these options.
mrdziuban said:
Pacifik: is that the double cover case? I saw that in the Verizon store and didn't like how it had both the silicone case and the hard shell.
Click to expand...
Click to collapse
It is the dual cover case, the hard plastic locks the silicon in place. Need extra protection from all the big machines I work with.
mrdziuban said:
Anyone have any thoughts on which case is better?--the Case-Mate Barely There or the Incipio Feather Hard Shell.
I want something that won't increase the thickness of my phone too much but will still offer some protection. Thanks!
Click to expand...
Click to collapse
Haven't had a chance to try out the Case-Mate case, but the Feather case is good if you want the LEAST amount of protection, while still having a case on. It is a very nice case in terms of material, because it feels very soft almost like a hardened suede type feel. As with all snap ons though be careful that you don't get sand in the back or that could really scratch up the backside.
Feather case though doesn't protect the top and bottom corners of the phone as well though. I've dropped my nexus s a few times that had a feather case and the corners were always the ones it landed on.. Must've been my bad luck, but in any case, my corners are a bit dented up.
Snorkumler said:
Feather case though doesn't protect the top and bottom corners of the phone as well though. I've dropped my nexus s a few times that had a feather case and the corners were always the ones it landed on.. Must've been my bad luck, but in any case, my corners are a bit dented up.
Click to expand...
Click to collapse
Thanks, that helps a lot. I always managed to drop my OG Droid on the corners too. Maybe I'd be better suited with a full body case.
mrdziuban said:
Thanks, that helps a lot. I always managed to drop my OG Droid on the corners too. Maybe I'd be better suited with a full body case.
Click to expand...
Click to collapse
Yeah, in which case there is that full-body Incipio case called the Silicyrlic
http://www.myincipio.com/Samsung-Ga...CRYLIC-Hard-Shell-Case-with-Silicone-Core.asp
That's the one that Pacifik is talking about. I have it as well, and it works great. But as Pacifik said, it is a lint magnet haha.
Snorkumler said:
Yeah, in which case there is that full-body Incipio case called the Silicyrlic
Click to expand...
Click to collapse
How thick does that make the phone?
mrdziuban said:
How thick does that make the phone?
Click to expand...
Click to collapse
Well the case is 138.6 x 72.6 x 2.3 mm
The Galaxy nexus is 135.5 x 67.9 x 8.9 mm
So about 3-5 mm larger on the width and length, and the thickness would be about 2mm thicker.
isnt the case mate one loose on GSM phones?
Has anyone seen these cases in a store? Would love to see one in person. I thought I read somewhere here that bestbuy has the case mate but I didn't see it at mine.
Sent from my Galaxy Nexus using xda premium
I have the Incipio case. It's good, but not a perfect fit. There's a bit of a gap between the phone and the case at the top of the phone.
sabesh said:
I have the Incipio case. It's good, but not a perfect fit. There's a bit of a gap between the phone and the case at the top of the phone.
Click to expand...
Click to collapse
Which one of two?
http://www.myincipio.com/Samsung-Ga...es/Samsung-Galaxy-Nexus-Cases-Accessories.asp
sabesh said:
I have the Incipio case. It's good, but not a perfect fit. There's a bit of a gap between the phone and the case at the top of the phone.
Click to expand...
Click to collapse
for the LTE or GSM version?
I have the Incipio Feather Hard Shell case from Verizon. It was between this and the glossy body case they had. I asked the rep if i could try on different cases to i could get a feel for the one i want. This one was hands down the best looking and best fitting. Its a 2 piece case yea. It does attract lint. But its really an awesome case. I got a Zagg screen protector also, and with this and the case, it gives my phone a really premium look. The added thickness isn't really noticeable if ur just using the phone as u normally would IMO. I would honestly choose this over any case out there. Great for, nice stylish look and great protection.
Sent from my G-Nexxxy... BRO.
Just to clarify, I'm pretty sure you have the silicrylic case not the feather.
Sent from my Galaxy Nexus using xda premium
I have the CaseMate white barely there case. It is an ok fit (a little loose), but it does actually fit better with the extended battery on.
lynseyw said:
I have the CaseMate white barely there case. It is an ok fit (a little loose), but it does actually fit better with the extended battery on.
Click to expand...
Click to collapse
do you have the gsm or lte model?
Ive read every review in this section but i cant figure out which one to chose. I need a case for my gf that adds as little weight and bulk to the sgsII as possible while still offering more impact protection than the stick on body protectors. Any recommendations? Thanks in advance
Hekademos said:
Ive read every review in this section but i cant figure out which one to chose. I need a case for my gf that adds as little weight and bulk to the sgsII as possible while still offering more impact protection than the stick on body protectors. Any recommendations? Thanks in advance
Click to expand...
Click to collapse
this case is the thinnest ive found on any phone ive ever owned and it doesnt add much bulk and it still protects the phone real good.
http://www.amazon.com/gp/product/B0060N1PCI/ref=oh_o00_s00_i00_details
s10shane said:
this case is the thinnest ive found on any phone ive ever owned and it doesnt add much bulk and it still protects the phone real good.
http://www.amazon.com/gp/product/B0060N1PCI/ref=oh_o00_s00_i00_details
Click to expand...
Click to collapse
Yeah the TPU case is pretty neat I had one on my nexus and it felt smooth. Protection wise was ok I still didn't feel comfortable with it falling. I have the D30 case and it is slim lightweight and adds hardly any bulk. The downside is that the buttons are a bit hard to press and may take some getting used to. Their is a trick to work around it, but that's up to you. I think with either you won't go wrong, the silicon ones are terrible and get stuck in your pocket and provide minimal protection.
There is enough hate in the world. Why can't we all get along here ...?
If you want the THINNEST case the "incipio feather ultralight hard case" but be warned: all the research I've done indicates that case won't do jack **** if you drop your phone as one reviewer put it, its a cosmetic accessory not a protective one.
I went with the diztronix tpu case that the guy above with Amazon link has except in matte black. Its amazing adds little bulk and protects against falls pretty well. Its also matte on the back so it doesn't get stuck going in jeans, etc. Like other tpu cases do.
Sent from my SGH-T989
I'm going to get the incipio feather case, but its not a protection case. Its what I like though. I know a few others that like it, so you might. I usually get TPU cases for all of my phones, but I'm tired of that route. I'm looking for other alternatives too though.
Incipio Feather
s10shane said:
this case is the thinnest ive found on any phone ive ever owned and it doesnt add much bulk and it still protects the phone real good.
http://www.amazon.com/gp/product/B0060N1PCI/ref=oh_o00_s00_i00_details
Click to expand...
Click to collapse
I have that exact case. Just got it last week and absolutely love it. No bulk, feels so damn smooth, and adds no weight. I had the body glove 2-piece case and that was too bulky. The Diztronic is definitely well worth the $10.
just bought the diztronic Matte Back Translucent Smoke Flexible
garyx24 said:
just bought the diztronic Matte Back Translucent Smoke Flexible
Click to expand...
Click to collapse
That's what I got few days ago. I ordered the high gloss translucent smoke but I got the matte version instead. Waiting for a reply back when they get back into town from some convention. Thinking on getting the matte black now.
I've been using these TPU cases for 3 years or so now. Nexus One, G2x, Xoom, and now my SGS2.
I also like that they're easy take on and off for a quick battery pull or going into a dock. Even after multiple pull ons and offs, they don't stretch, sag, tear. They are great for the price.
shorty87 said:
I have that exact case. Just got it last week and absolutely love it. No bulk, feels so damn smooth, and adds no weight. I had the body glove 2-piece case and that was too bulky. The Diztronic is definitely well worth the $10.
Click to expand...
Click to collapse
i bought that TPU case as well...very good case, thin and seems that it will protect the corners a little bit.. worth the $6
thanks for the help guys. She went with the Incipio. I let you all know if it fails.
diztronic Matte Back Translucent Smoke Flexible came today and i've gotta say it's a very good case. Very thin, flexible, good grip, and gets the job done
If I can get one that ships to Canada, I'm going for the Diztronic as well.
I don't like how the Incipio doesn't cover the top and bottom of the phone. WHat's up with that.
garyx24 said:
diztronic Matte Back Translucent Smoke Flexible came today and i've gotta say it's a very good case. Very thin, flexible, good grip, and gets the job done
Click to expand...
Click to collapse
I just picked one up as well, came in yesterday and it's very nice
unlvmike said:
Yeah the TPU case is pretty neat I had one on my nexus and it felt smooth. Protection wise was ok I still didn't feel comfortable with it falling. I have the D30 case and it is slim lightweight and adds hardly any bulk. The downside is that the buttons are a bit hard to press and may take some getting used to. Their is a trick to work around it, but that's up to you. I think with either you won't go wrong, the silicon ones are terrible and get stuck in your pocket and provide minimal protection.
There is enough hate in the world. Why can't we all get along here ...?
Click to expand...
Click to collapse
What is the trick for the d30 (impossible) buttons
Dougshell said:
What is the trick for the d30 (impossible) buttons
Click to expand...
Click to collapse
You take an exacto knife and cut below and above the buttons.
I remember reading it from a thread on here. After a lot of usage mine is a lot easier to press. Didn't cut them.
http://www.youtube.com/watch?v=j9LBhRuMWP8Sent from my SGH-T989 using xda premium
Bodyglove
Sent from my SGH-T989 using Tapatalk
I have the Incipio and its a delight
Sent from my SGH-T989 using XDA Premium App
Dougshell said:
What is the trick for the d30 (impossible) buttons
Click to expand...
Click to collapse
There's another option that someone on XDA mentioned which requires sticking a small bit of paper to the inside of both buttons. He also included pictures in the post (do a search). This way you don't cut into your d30 case and reduce the life of the buttons. I found some glossy paper from an ad, a little bit thicker than normal print paper, and used a small piece of scotch tape to attach it underneath the buttons. It worked like a charm.
Does anyone have this case?
http://www.ebay.com/itm/Clear-TPU-G...ung-Galaxy-S-III-S3-i9300-Phone-/320946525971
If so, I'd love a mini-review and maybe a couple of pictures.
I really like the idea of a clear case to show off the phone. This one definitely looks clear and also has cutouts (I wound do a TPU w/o power/volume cutouts).
How do you think it would compare with the Diztronic TPU case?
http://tpu-cases.com/index.php?main_page=product_info&cPath=42_68&products_id=269
From what I've heard, though, this Diztronic clear one is not very clear (it's like clear frosted). The ebay one looks almost totally clear.
I don't have quite the same case, but a different [partially] clear tpu one from ebay... http://forum.xda-developers.com/showpost.php?p=28547621&postcount=17
I really like it. I've thought about getting one like you posted. On mine, at least, the clear part is pretty clear. I, too, got it to show off the pebble blue, and I think it does a pretty good job. On a side note, I think this may be my first TPU case, and I really like the material, and also the little "nubs" on the sides of my particular one.
I bought the Nexus 5 and it's amazing. I've already got a screen protector but now I'm still looking for the right case. My first choice was the official bumper case but that isn't an option anymore because it isn't only unavailable at the moment, but most of the people also say it starts to peel off very quickly. So I kept looking for a case that could satisfy my needs. I want to have a good-looking case that delivers the protection the N5 needs, but doesn't add too much bulk so it wouldn't look like some kind of dragon. I also want to mention that I'm not looking for any kind of flip cover because a phone is a phone and not a book.
So after some research I've come down to 2 cases that both give a good impression. Spigen Case Slim Armor and Spigen Case Neo Hybrid. They both have a fairly good reputation so I really can't decide which one to get. I also don't really know the difference. I guess they are the same in thickness. The Slim Armor one probably has better protection and from what I've read isn't as slippery as the Neo Hybrid one, but that case probably also has nice features.
Which one should I get? Or are there better cases available? Thanks in advance!
Spaceblow said:
I bought the Nexus 5 and it's amazing. I've already got a screen protector but now I'm still looking for the right case. My first choice was the official bumper case but that isn't an option anymore because it isn't only unavailable at the moment, but most of the people also say it starts to peel off very quickly. So I kept looking for a case that could satisfy my needs. I want to have a good-looking case that delivers the protection the N5 needs, but doesn't add too much bulk so it wouldn't look like some kind of dragon. I also want to mention that I'm not looking for any kind of flip cover because a phone is a phone and not a book.
So after some research I've come down to 2 cases that both give a good impression. Spigen Case Slim Armor and Spigen Case Neo Hybrid. They both have a fairly good reputation so I really can't decide which one to get. I also don't really know the difference. I guess they are the same in thickness. The Slim Armor one probably has better protection and from what I've read isn't as slippery as the Neo Hybrid one, but that case probably also has nice features.
Which one should I get? Or are there better cases available? Thanks in advance!
Click to expand...
Click to collapse
I have bought like a whole load of cases and found that my favorite case is a simple TPU case like Distronic's cases (I like the black one, the white/clear/frosted design gets discolored over time) they don't make the phone overly bulky, provide pretty good drop protection and are pretty cheap. I have owned Spigen's slim armor and the slim armor with the flip cover and while they are great cases they made the phone a little more chunky than I liked.
WangLung said:
I have bought like a whole load of cases and found that my favorite case is a simple TPU case like Distronic's cases (I like the black one, the white/clear/frosted design gets discolored over time) they don't make the phone overly bulky, provide pretty good drop protection and are pretty cheap. I have owned Spigen's slim armor and the slim armor with the flip cover and while they are great cases they made the phone a little more chunky than I liked.
Click to expand...
Click to collapse
Also came here to recommend the Diztronic TPU... I have the black one and its my favorite. Have tried quite a few cases as well, although never had a spigen
Sent from my Nexus 5
+1 for diztronic
It adds fairly good protection but less bulk than most cases(not counting hard shells). Buttons are easy to press and it looks and feels good. It's cheap too!
I've also had spigen neo hybrid but found it too bulky and slippery. Buttons and looks were nice tho.
Btw clear diztronic is out of stock and they dont sell it anymore.
I'd stay away from hard cases such as the ringke slim or spigen hard crystal shell as they scratched up my phone
+1 for soft
Go with the slim armor. One of the best cases I've had, and I've had A LOT of cases. Its a lot more comfortable to hold over the neo hybrid.
Sent from my Nexus 5 using Tapatalk
My favorite case by far is the Magpul Field. https://store.magpul.com/product/MAG474/cases
Magpul looks awesome dude. Not those clear backs. My ringke got scratched up real bad. Neo hybrid looks decent, in fact I'm getting it. Considering a diztronic as well. I-blason is decent too.
I haven't got the specific Spigen cases you're interested in but I do have the Spigen ultra fit and ultra hybrid. I have been using both cases for the past year (the ultra fit mostly because it doesn't add as much bulk as the ultra hybrid) and both are very good cases that I like. However, I recently ordered the Diztronic case and I'm waiting for it to arrive. The reason is I recently used my previous phone with a Diztronic case and it reminded me that I generally prefer good quality TPU cases more. So I decided I may as well get a Diztronic case for my Nexus 5. As you may see, I agree with the others in recommending the Diztronic case.
I have the Spigen Case Slim Armor, a Tech21 case, and a TPU case, I prefer the Tech21, as a matter of fact I dropped my phone just the other day, and it landed flat on it's back, I thought for sure the screen would be shattered, but nope, all is well.
The Tech21 seems to have more of an "Air cushion" between the case and back of the phone.
WangLung said:
I have bought like a whole load of cases and found that my favorite case is a simple TPU case like Distronic's cases (I like the black one, the white/clear/frosted design gets discolored over time) they don't make the phone overly bulky, provide pretty good drop protection and are pretty cheap. I have owned Spigen's slim armor and the slim armor with the flip cover and while they are great cases they made the phone a little more chunky than I liked.
Click to expand...
Click to collapse
Well, I have a pretty cheap one at the moment, this one (it's indeed not a very pretty one). The case barely adds any bulk but it doesn't give the safest feeling. I'm protected for any scratches but I don't think these kind of cases absorb impact very well, so I'll probably still go for something chunkier but then I'll at least know I'm pretty safe.
bendirkss said:
Go with the slim armor. One of the best cases I've had, and I've had A LOT of cases. Its a lot more comfortable to hold over the neo hybrid.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
From what I've read the Neo Hybrid is a bit overrated and doesn't feel very good in the hand. So yeah, I'll probably get the Slim Armor one.
bleAfy said:
I haven't got the specific Spigen cases you're interested in but I do have the Spigen ultra fit and ultra hybrid. I have been using both cases for the past year (the ultra fit mostly because it doesn't add as much bulk as the ultra hybrid) and both are very good cases that I like. However, I recently ordered the Diztronic case and I'm waiting for it to arrive. The reason is I recently used my previous phone with a Diztronic case and it reminded me that I generally prefer good quality TPU cases more. So I decided I may as well get a Diztronic case for my Nexus 5. As you may see, I agree with the others in recommending the Diztronic case.
Click to expand...
Click to collapse
These cases are probably really well-made but I don't think they protect that good if you compare it to the bulkier cases, definitely not against drops.
idbl_fanatic said:
I have the Spigen Case Slim Armor, a Tech21 case, and a TPU case, I prefer the Tech21, as a matter of fact I dropped my phone just the other day, and it landed flat on it's back, I thought for sure the screen would be shattered, but nope, all is well.
The Tech21 seems to have more of an "Air cushion" between the case and back of the phone.
Click to expand...
Click to collapse
I thought the Spigen Slim Armor also has these air cushions?
I felt like that too until this convinced me that a TPU case is good enough.
https://www.youtube.com/watch?v=KY9Svj9fYVg
The Cruzerlite cases are pretty similar to the Diztronic ones.
Spaceblow said:
Well, I have a pretty cheap one at the moment, this one (it's indeed not a very pretty one). The case barely adds any bulk but it doesn't give the safest feeling. I'm protected for any scratches but I don't think these kind of cases absorb impact very well, so I'll probably still go for something chunkier but then I'll at least know I'm pretty safe.
From what I've read the Neo Hybrid is a bit overrated and doesn't feel very good in the hand. So yeah, I'll probably get the Slim Armor one.
These cases are probably really well-made but I don't think they protect that good if you compare it to the bulkier cases, definitely not against drops.
I thought the Spigen Slim Armor also has these air cushions?
Click to expand...
Click to collapse
The Tech21 has a little more cushion
My favorite case after trying out several:
Bugdroid by Cruzerlite
http://www.amazon.com/Cruzerlite-Bu...6&sr=1-1&keywords=cruzerlite+bugdroid+nexus+5
I love the Google Bumper Case.
Magpul then diztronic. Slim armor I hated I had zero button feedback
c_brown93 said:
I love the Google Bumper Case.
Click to expand...
Click to collapse
I love them too. Very good feel in hand. I don't know it until I bought one. I know the Official one now unavailable but still we have a lots high quality one in eBay. Not OEM, but still very good (even similar if you ask me)
I'm using spigen case
i get it for free from Nexus gift pack
It's nice, and it feels like the original back of nexus
Had both the Neo Hybrid and the Slim Armor and prefer the Neo Hybrid.
I found that in comparison to the Neo Hybrid, the Slim Armor added too much bulk to the phone. The back of the NH feels better (rubber, a bit like the original back of the phone) while the back of the SA is more slippery (metal). The buttons on the SA required too much force to press and you don't really feel any feedback while pressing.
The only reason I would choose the SA over the NH is for the extra protection, but for me the NH offers more than enough protection (dropped it a few of times indoor and outdoor, only some minor scruffs on the corners of the case).
Didn't Spigen used to sell just the outer band for the neo hybrid? That way you can have a few different colors if you like
I should be receiving my new device next week :laugh:and I can't decide what case to pickup.
I use a magnetic phone mount in my car so I will have to put the magnetic plate between my device and the cell phone case. That being said anything with a transparent back is out of the question. If the case has legs it would be ideal as well. I work at a desk all day and I would rather not have it wobbling around if I'm trying to use it while it's on my desk.
I have used a UAG case on my S5 for the past two years and I was very happy with it. Right now I'm considering the TUDIA Slim-Fit HEAVY DUTY [MERGE] Extreme. Any other suggestions would be greatly appreciated.
Looking for a case as well, and I also use a magnetic mount in my car. I was wondering if, since the phone's back is all metal, do I even need the plate between the case and phone?
ffejeroni said:
Looking for a case as well, and I also use a magnetic mount in my car. I was wondering if, since the phone's back is all metal, do I even need the plate between the case and phone?
Click to expand...
Click to collapse
That's a good point. I guess we will find out soon enough!
The TUDIA case I mentioned above is a 2 piece case so I was planning on putting the metal place between the two parts of the case that way the metal plate doesn't have to physically touch my device.
Otherwise I'm probably going to at the very least place a small piece of paper between the metal plate and my device to prevent it from scratching the rear of my device.
Aluminum generally isn't magnetic, and I'd be slightly afraid to put a magnet right onto the phone and risk damaging some internals. I'm going with the Spigen Neo Hybrid, and will likely put the plate on the phone itself as well.
I have ordered these two. Always used spigen on my devices. Also ordered a full tempered glass protector. After reading on the protector its compatible with case's. Screenshots attached for easy reference.
Generally I prefer clear case and put some good pictures on the back.
all oneplus3 accesories are compatible just goto oneplus3 forum and check it out
ffejeroni said:
Looking for a case as well, and I also use a magnetic mount in my car. I was wondering if, since the phone's back is all metal, do I even need the plate between the case and phone?
Click to expand...
Click to collapse
Aluminium is not magnetic ...
Anybody uses dbrands.....
I found them very cool but i don't know if it's easy to apply them......
I ended up ordering the Spigen Neo Hybrid as well. I will let you guys know it fits with the metal place once I receive it next week.
cultofluna said:
Anybody uses dbrands.....
I found them very cool but i don't know if it's easy to apply them......
Click to expand...
Click to collapse
I watched a YouTube video and they made it look like a breeze. But to get it perfect I think would be very difficult and stressful. But when successful it's well worth it in my mind. One imperfection would just flip me out
LMcR92 said:
I have ordered these two. Always used spigen on my devices. Also ordered a full tempered glass protector. After reading on the protector its compatible with case's. Screenshots attached for easy reference.
Click to expand...
Click to collapse
Let me know if the screen protector fits.
Already have the spigen case, just not sure if it works with the curved screen protector.
I went for OnePlus 3/3T Karbon Case. Really liking it. Also had ebony wood and sandstone case for tests. Ebony wood simply would not fit, however sandstone was very bulky in comparison to Karbon Case + I don't like how the sandstone feels in hand.
jemeljsh said:
I went for OnePlus 3/3T Karbon Case. Really liking it. Also had ebony wood and sandstone case for tests. Ebony wood simply would not fit, however sandstone was very bulky in comparison to Karbon Case + I don't like how the sandstone feels in hand.
Click to expand...
Click to collapse
I got the ebony case for the 3T and not liking it. It's kind of hard to grip with the case on, sharp edges everywhere. I'm using it without a case now which is much comfortable and grippier. Don't know how much pain it's returning the case back for refund but will try that and look for a different case.
Sent from my ONEPLUS A3000 using Tapatalk
I have a friend who bought and likes the Spigen Neo Hybrid case, and I bought the OtterBox. I personally prefer the OtterBox, but the Neo Hybrid case looks pretty nice too.
Picked up the Cruzerlite Spartan case for my 3T. Got it yesterday and seems like it'll be a good rugged case. It's also not to thick. Get to try it when the phone finally gets here tomorrow.
Edit: posted the onepluse2 case but they do have it for the 3T also.
kirdroid said:
I got the ebony case for the 3T and not liking it. It's kind of hard to grip with the case on, sharp edges everywhere. I'm using it without a case now which is much comfortable and grippier. Don't know how much pain it's returning the case back for refund but will try that and look for a different case.
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
I usually go without cases but with the camera bump on 3T it makes me too cautious when putting down the phone on the table. Original Karbon Case does not create too much bulk as its quite slim and in the same time it does protect the camera and actually it has bumps on the front (corners) so you can put it face down too and not worry about scratches.
I bought Ringke Fusion. Awesome case. It has nice clicky buttons.
https://www.amazon.com/OnePlus-Ring...=1480301837&sr=8-1&keywords=ringke+oneplus+3t
I have my Neo Hybrid in hand, but phone won't be here until tomorrow. I'll try to give impressions/photos.
GiSS88 said:
I have my Neo Hybrid in hand, but phone won't be here until tomorrow. I'll try to give impressions/photos.
Click to expand...
Click to collapse
I ordered that one too but not available to me till 2nd of December so I have this till then.